From 477654fc5d5078d2213817609e68e8c968293261 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 27 Apr 2006 15:44:50 +0100 Subject: [PATCH 01/17] [MIPS] Fix typo Found by Chris Dearman (chris@mips.com). Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index d101d2fb24ca..a9c6de1b9542 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -101,7 +101,7 @@ FEXPORT(restore_all) # restore full frame EMT 1: mfc0 v1, CP0_TCSTATUS - /* We set IXMT above, XOR should cler it here */ + /* We set IXMT above, XOR should clear it here */ xori v1, v1, TCSTATUS_IXMT or v1, v0, v1 mtc0 v1, CP0_TCSTATUS From 343fdc39713d9c2fe836523e8f2dfc6a3ac39122 Mon Sep 17 00:00:00 2001 From: Herbert Valerio Riedel Date: Wed, 12 Apr 2006 09:03:08 +0200 Subject: [PATCH 02/17] [MIPS] AU1xxx mips_timer_interrupt() fixes common/au1000/irq.c was missing a mips_timer_interrupt() prototype, whereas in common/au1000/time.c the actual mips_timer_interrupt() implementation was missing an irq_exit() invocation, causing a preempt_count() leak. Signed-off-by: Herbert Valerio Riedel Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/irq.c | 1 + arch/mips/au1000/common/time.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index da61de776154..afe05ec12c27 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -68,6 +68,7 @@ extern void set_debug_traps(void); extern irq_cpustat_t irq_stat [NR_CPUS]; +extern void mips_timer_interrupt(struct pt_regs *regs); static void setup_local_irq(unsigned int irq, int type, int int_req); static unsigned int startup_irq(unsigned int irq); diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index f85f1524b366..f74d66a58a21 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -116,6 +116,7 @@ void mips_timer_interrupt(struct pt_regs *regs) null: ack_r4ktimer(0); + irq_exit(); } #ifdef CONFIG_PM From 6e9538917c5f62c1a1598da9b898702800801b98 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 16 Apr 2006 23:27:21 +0400 Subject: [PATCH 03/17] [MIPS] Fix marking buddy of pte global for MIPS32 w/36-bit physical address In case of CONFIG_64BIT_PHYS_ADDR, set_pte() and pte_clear() functions only set _PAGE_GLOBAL bit in the pte_low field of the buddy PTEs, forgetting to propagate ito to pte_high. Thus, the both pages might not really be made global for the CPU (since it AND's the G-bit of the odd / even PTEs together to decide whether they're global or not). Thus, if only a single page is allocated via vmalloc() or ioremap(), it's not really global for CPU (and it must be, since this is kernel mapping), and thus its ASID is compared against the current process' one -- so, we'll get into trouble sooner or later... Also, pte_none() will fail on global pages because _PAGE_GLOBAL bit is set in both pte_low and pte_high, and pte_val() will return u64 value consisting of those fields concateneted. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- include/asm-mips/pgtable.h | 88 +++++++++++++++++++++----------------- 1 file changed, 49 insertions(+), 39 deletions(-) diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index 702a28fa7a34..174a3cda8c26 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -82,10 +82,11 @@ extern void paging_init(void); #define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT)) #define pmd_page_kernel(pmd) pmd_val(pmd) -#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL)) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) - #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) + +#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL)) +#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT) + static inline void set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; @@ -93,27 +94,35 @@ static inline void set_pte(pte_t *ptep, pte_t pte) ptep->pte_low = pte.pte_low; //printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low); - if (pte_val(pte) & _PAGE_GLOBAL) { + if (pte.pte_low & _PAGE_GLOBAL) { pte_t *buddy = ptep_buddy(ptep); /* * Make sure the buddy is global too (if it's !none, * it better already be global) */ - if (pte_none(*buddy)) - buddy->pte_low |= _PAGE_GLOBAL; + if (pte_none(*buddy)) { + buddy->pte_low |= _PAGE_GLOBAL; + buddy->pte_high |= _PAGE_GLOBAL; + } } } #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { + pte_t null = __pte(0); + /* Preserve global status for the pair */ - if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL) - set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL)); - else - set_pte_at(mm, addr, ptep, __pte(0)); + if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL) + null.pte_low = null.pte_high = _PAGE_GLOBAL; + + set_pte_at(mm, addr, ptep, null); } #else + +#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL)) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) + /* * Certain architectures need to do special things when pte's * within a page table are directly modified. Thus, the following @@ -174,75 +183,76 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; */ static inline int pte_user(pte_t pte) { BUG(); return 0; } #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) -static inline int pte_read(pte_t pte) { return (pte).pte_low & _PAGE_READ; } -static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_WRITE; } -static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_MODIFIED; } -static inline int pte_young(pte_t pte) { return (pte).pte_low & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return (pte).pte_low & _PAGE_FILE; } +static inline int pte_read(pte_t pte) { return pte.pte_low & _PAGE_READ; } +static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; } +static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; } +static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; } + static inline pte_t pte_wrprotect(pte_t pte) { - (pte).pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); - (pte).pte_high &= ~_PAGE_SILENT_WRITE; + pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); + pte.pte_high &= ~_PAGE_SILENT_WRITE; return pte; } static inline pte_t pte_rdprotect(pte_t pte) { - (pte).pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ); - (pte).pte_high &= ~_PAGE_SILENT_READ; + pte.pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ); + pte.pte_high &= ~_PAGE_SILENT_READ; return pte; } static inline pte_t pte_mkclean(pte_t pte) { - (pte).pte_low &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE); - (pte).pte_high &= ~_PAGE_SILENT_WRITE; + pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE); + pte.pte_high &= ~_PAGE_SILENT_WRITE; return pte; } static inline pte_t pte_mkold(pte_t pte) { - (pte).pte_low &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ); - (pte).pte_high &= ~_PAGE_SILENT_READ; + pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ); + pte.pte_high &= ~_PAGE_SILENT_READ; return pte; } static inline pte_t pte_mkwrite(pte_t pte) { - (pte).pte_low |= _PAGE_WRITE; - if ((pte).pte_low & _PAGE_MODIFIED) { - (pte).pte_low |= _PAGE_SILENT_WRITE; - (pte).pte_high |= _PAGE_SILENT_WRITE; + pte.pte_low |= _PAGE_WRITE; + if (pte.pte_low & _PAGE_MODIFIED) { + pte.pte_low |= _PAGE_SILENT_WRITE; + pte.pte_high |= _PAGE_SILENT_WRITE; } return pte; } static inline pte_t pte_mkread(pte_t pte) { - (pte).pte_low |= _PAGE_READ; - if ((pte).pte_low & _PAGE_ACCESSED) { - (pte).pte_low |= _PAGE_SILENT_READ; - (pte).pte_high |= _PAGE_SILENT_READ; + pte.pte_low |= _PAGE_READ; + if (pte.pte_low & _PAGE_ACCESSED) { + pte.pte_low |= _PAGE_SILENT_READ; + pte.pte_high |= _PAGE_SILENT_READ; } return pte; } static inline pte_t pte_mkdirty(pte_t pte) { - (pte).pte_low |= _PAGE_MODIFIED; - if ((pte).pte_low & _PAGE_WRITE) { - (pte).pte_low |= _PAGE_SILENT_WRITE; - (pte).pte_high |= _PAGE_SILENT_WRITE; + pte.pte_low |= _PAGE_MODIFIED; + if (pte.pte_low & _PAGE_WRITE) { + pte.pte_low |= _PAGE_SILENT_WRITE; + pte.pte_high |= _PAGE_SILENT_WRITE; } return pte; } static inline pte_t pte_mkyoung(pte_t pte) { - (pte).pte_low |= _PAGE_ACCESSED; - if ((pte).pte_low & _PAGE_READ) - (pte).pte_low |= _PAGE_SILENT_READ; - (pte).pte_high |= _PAGE_SILENT_READ; + pte.pte_low |= _PAGE_ACCESSED; + if (pte.pte_low & _PAGE_READ) + pte.pte_low |= _PAGE_SILENT_READ; + pte.pte_high |= _PAGE_SILENT_READ; return pte; } #else From 98a41de99a4e4febe99b22c3a28d434caeb3165c Mon Sep 17 00:00:00 2001 From: Nigel Stephens Date: Thu, 27 Apr 2006 15:50:32 +0100 Subject: [PATCH 04/17] [MIPS] Add missing 34K processor IDs The 34K is very much like a 24K on steroids. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 1 + arch/mips/mm/c-r4k.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 4901f0a37fca..35cb08da3820 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -902,6 +902,7 @@ static inline void parity_protection_init(void) { switch (current_cpu_data.cputype) { case CPU_24K: + case CPU_34K: case CPU_5KC: write_c0_ecc(0x80000000); back_to_back_c0_hazard(); diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 4182e1176fae..4420191795f3 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -968,6 +968,7 @@ static void __init probe_pcache(void) case CPU_SB1: break; case CPU_24K: + case CPU_34K: if (!(read_c0_config7() & (1 << 16))) default: if (c->dcache.waysize > PAGE_SIZE) From c620953c32d301c2a7bc73f9f780301e110b7d7c Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Tue, 2 May 2006 14:08:46 +0100 Subject: [PATCH 05/17] [MIPS] Fix detection and handling of the 74K processor. Nothing exciting; Linux just didn't know it yet so this is most adding a value to a case statement. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 4 ++++ arch/mips/kernel/proc.c | 1 + arch/mips/mm/tlbex.c | 1 + arch/mips/oprofile/common.c | 1 + arch/mips/oprofile/op_model_mipsxx.c | 4 ++++ include/asm-mips/cpu.h | 4 +++- 6 files changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 58b3b14873cb..17184921b71d 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -121,6 +121,7 @@ static inline void check_wait(void) case CPU_24K: case CPU_25KF: case CPU_34K: + case CPU_74K: case CPU_PR4450: cpu_wait = r4k_wait; printk(" available.\n"); @@ -593,6 +594,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c) case PRID_IMP_34K: c->cputype = CPU_34K; break; + case PRID_IMP_74K: + c->cputype = CPU_74K; + break; } } diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 84ab959f924a..197952c44467 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -74,6 +74,7 @@ static const char *cpu_name[] = { [CPU_24K] = "MIPS 24K", [CPU_25KF] = "MIPS 25Kf", [CPU_34K] = "MIPS 34K", + [CPU_74K] = "MIPS 74K", [CPU_VR4111] = "NEC VR4111", [CPU_VR4121] = "NEC VR4121", [CPU_VR4122] = "NEC VR4122", diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 053dbacac56b..4ff07e2efcb3 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -906,6 +906,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_4KEC: case CPU_24K: case CPU_34K: + case CPU_74K: i_ehb(p); tlbw(p); break; diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index f2b4862aaae5..91b799d2cd88 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -80,6 +80,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_24K: case CPU_25KF: case CPU_34K: + case CPU_74K: case CPU_SB1: case CPU_SB1A: lmodel = &op_model_mipsxx; diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index 95d488ca0754..e7ce92391303 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -205,6 +205,10 @@ static int __init mipsxx_init(void) case CPU_34K: op_model_mipsxx.cpu_type = "mips/34K"; break; + + case CPU_74K: + op_model_mipsxx.cpu_type = "mips/74K"; + break; #endif case CPU_5KC: diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index 818b9a97e214..0117138149bc 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -87,6 +87,7 @@ #define PRID_IMP_24K 0x9300 #define PRID_IMP_34K 0x9500 #define PRID_IMP_24KE 0x9600 +#define PRID_IMP_74K 0x9700 /* * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE @@ -196,7 +197,8 @@ #define CPU_34K 60 #define CPU_PR4450 61 #define CPU_SB1A 62 -#define CPU_LAST 62 +#define CPU_74K 63 +#define CPU_LAST 63 /* * ISA Level encodings From 235a9d3eee9a9588c17d39efff8373d0513549b5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 3 May 2006 02:27:40 +0100 Subject: [PATCH 06/17] [MIPS] Remove support for sysmips(2) SETNAME and MIPS_RDNVRAM operations. SETNAME only had a minor defect but probably never had a user and MIPS_RDNVRAM was unimplemented anyway. Signed-off-by: Ralf Baechle --- arch/mips/kernel/syscall.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 2aeaa2fd4b32..8f4fdd94dbd0 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -280,27 +280,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) char __user *name; switch(cmd) { - case SETNAME: { - char nodename[__NEW_UTS_LEN + 1]; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - name = (char __user *) arg1; - - len = strncpy_from_user(nodename, name, __NEW_UTS_LEN); - if (len < 0) - return -EFAULT; - - down_write(&uts_sem); - strncpy(system_utsname.nodename, nodename, len); - nodename[__NEW_UTS_LEN] = '\0'; - strlcpy(system_utsname.nodename, nodename, - sizeof(system_utsname.nodename)); - up_write(&uts_sem); - return 0; - } - case MIPS_ATOMIC_SET: printk(KERN_CRIT "How did I get here?\n"); return -EINVAL; @@ -313,9 +292,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) case FLUSH_CACHE: __flush_cache_all(); return 0; - - case MIPS_RDNVRAM: - return -EIO; } return -EINVAL; From 6ee1da94c5fed95bacce3eda8e6d9e69324ecab7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 3 May 2006 20:42:39 +0100 Subject: [PATCH 07/17] [MIPS] Update/fix futex assembly o Implement futex_atomic_op_inuser() operation o Don't use the R10000-ll/sc bug workaround version for every processor. branch likely is deprecated and some historic ll/sc processors don't implement it. In any case it's slow. Signed-off-by: Ralf Baechle --- include/asm-mips/futex.h | 141 ++++++++++++++++++++++++++++++++------- 1 file changed, 116 insertions(+), 25 deletions(-) diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h index a554089991f2..12d118f1bc9c 100644 --- a/include/asm-mips/futex.h +++ b/include/asm-mips/futex.h @@ -7,6 +7,7 @@ #include #include #include +#include #ifdef CONFIG_SMP #define __FUTEX_SMP_SYNC " sync \n" @@ -16,30 +17,58 @@ #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " .set mips3 \n" \ - "1: ll %1, (%3) # __futex_atomic_op1 \n" \ - " .set mips0 \n" \ - " " insn " \n" \ - " .set mips3 \n" \ - "2: sc $1, (%3) \n" \ - " beqzl $1, 1b \n" \ - __FUTEX_SMP_SYNC \ - "3: \n" \ - " .set pop \n" \ - " .set mips0 \n" \ - " .section .fixup,\"ax\" \n" \ - "4: li %0, %5 \n" \ - " j 2b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " "__UA_ADDR "\t1b, 4b \n" \ - " "__UA_ADDR "\t2b, 4b \n" \ - " .previous \n" \ - : "=r" (ret), "=r" (oldval) \ - : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \ + if (cpu_has_llsc && R10000_LLSC_WAR) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: ll %1, (%3) # __futex_atomic_op \n" \ + " .set mips0 \n" \ + " " insn " \n" \ + " .set mips3 \n" \ + "2: sc $1, (%3) \n" \ + " beqzl $1, 1b \n" \ + __FUTEX_SMP_SYNC \ + "3: \n" \ + " .set pop \n" \ + " .set mips0 \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %5 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 4b \n" \ + " "__UA_ADDR "\t2b, 4b \n" \ + " .previous \n" \ + : "=r" (ret), "=r" (oldval) \ + : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \ + } else if (cpu_has_llsc) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: ll %1, (%3) # __futex_atomic_op \n" \ + " .set mips0 \n" \ + " " insn " \n" \ + " .set mips3 \n" \ + "2: sc $1, (%3) \n" \ + " beqz $1, 1b \n" \ + __FUTEX_SMP_SYNC \ + "3: \n" \ + " .set pop \n" \ + " .set mips0 \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %5 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 4b \n" \ + " "__UA_ADDR "\t2b, 4b \n" \ + " .previous \n" \ + : "=r" (ret), "=r" (oldval) \ + : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \ + } else \ + ret = -ENOSYS; \ } static inline int @@ -102,7 +131,69 @@ futex_atomic_op_inuser (int encoded_op, int __user *uaddr) static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) { - return -ENOSYS; + int retval; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + "# futex_atomic_cmpxchg_inatomic \n" + " .set push \n" + " .set noat \n" + " .set mips3 \n" + "1: ll %0, %2 \n" + " bne %0, %z3, 3f \n" + " .set mips0 \n" + " move $1, %z4 \n" + " .set mips3 \n" + "2: sc $1, %1 \n" + " beqzl $1, 1b \n" + __FUTEX_SMP_SYNC + "3: \n" + " .set pop \n" + " .section .fixup,\"ax\" \n" + "4: li %0, %5 \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "__UA_ADDR "\t1b, 4b \n" + " "__UA_ADDR "\t2b, 4b \n" + " .previous \n" + : "=&r" (retval), "=R" (*uaddr) + : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) + : "memory"); + } else if (cpu_has_llsc) { + __asm__ __volatile__( + "# futex_atomic_cmpxchg_inatomic \n" + " .set push \n" + " .set noat \n" + " .set mips3 \n" + "1: ll %0, %2 \n" + " bne %0, %z3, 3f \n" + " .set mips0 \n" + " move $1, %z4 \n" + " .set mips3 \n" + "2: sc $1, %1 \n" + " beqz $1, 1b \n" + __FUTEX_SMP_SYNC + "3: \n" + " .set pop \n" + " .section .fixup,\"ax\" \n" + "4: li %0, %5 \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "__UA_ADDR "\t1b, 4b \n" + " "__UA_ADDR "\t2b, 4b \n" + " .previous \n" + : "=&r" (retval), "=R" (*uaddr) + : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) + : "memory"); + } else + return -ENOSYS; + + return retval; } #endif From 1c0c1ae4f3d5057d091677d0ef7dbaeb28122ded Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Mon, 8 May 2006 15:28:22 -0400 Subject: [PATCH 08/17] [MIPS] Update struct sigcontext member names Rename the 64-bit sc_hi and sc_lo arrays to use the same names as the 32-bit struct sigcontext (sc_mdhi, sc_hi1, et cetera). Signed-off-by: Daniel Jacobowitz Signed-off-by: Ralf Baechle --- arch/mips/kernel/asm-offsets.c | 4 ++-- arch/mips/kernel/signal-common.h | 30 ------------------------------ include/asm-mips/sigcontext.h | 10 ++++++++-- 3 files changed, 10 insertions(+), 34 deletions(-) diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index 92b28b674d6f..0facfaf4e950 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -272,8 +272,8 @@ void output_sc_defines(void) text("/* Linux sigcontext offsets. */"); offset("#define SC_REGS ", struct sigcontext, sc_regs); offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs); - offset("#define SC_MDHI ", struct sigcontext, sc_hi); - offset("#define SC_MDLO ", struct sigcontext, sc_lo); + offset("#define SC_MDHI ", struct sigcontext, sc_mdhi); + offset("#define SC_MDLO ", struct sigcontext, sc_mdlo); offset("#define SC_PC ", struct sigcontext, sc_pc); offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr); linefeed; diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 3ca786215d48..ce6cb915c0a7 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -31,7 +31,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) save_gp_reg(31); #undef save_gp_reg -#ifdef CONFIG_32BIT err |= __put_user(regs->hi, &sc->sc_mdhi); err |= __put_user(regs->lo, &sc->sc_mdlo); if (cpu_has_dsp) { @@ -43,20 +42,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) err |= __put_user(mflo3(), &sc->sc_lo3); err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); } -#endif -#ifdef CONFIG_64BIT - err |= __put_user(regs->hi, &sc->sc_hi[0]); - err |= __put_user(regs->lo, &sc->sc_lo[0]); - if (cpu_has_dsp) { - err |= __put_user(mfhi1(), &sc->sc_hi[1]); - err |= __put_user(mflo1(), &sc->sc_lo[1]); - err |= __put_user(mfhi2(), &sc->sc_hi[2]); - err |= __put_user(mflo2(), &sc->sc_lo[2]); - err |= __put_user(mfhi3(), &sc->sc_hi[3]); - err |= __put_user(mflo3(), &sc->sc_lo[3]); - err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); - } -#endif err |= __put_user(!!used_math(), &sc->sc_used_math); @@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) current_thread_info()->restart_block.fn = do_no_restart_syscall; err |= __get_user(regs->cp0_epc, &sc->sc_pc); -#ifdef CONFIG_32BIT err |= __get_user(regs->hi, &sc->sc_mdhi); err |= __get_user(regs->lo, &sc->sc_mdlo); if (cpu_has_dsp) { @@ -104,20 +88,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); } -#endif -#ifdef CONFIG_64BIT - err |= __get_user(regs->hi, &sc->sc_hi[0]); - err |= __get_user(regs->lo, &sc->sc_lo[0]); - if (cpu_has_dsp) { - err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg); - err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg); - err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg); - err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg); - err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg); - err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg); - err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); - } -#endif #define restore_gp_reg(i) do { \ err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \ diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h index 8edabb0be23f..cefa657dd04a 100644 --- a/include/asm-mips/sigcontext.h +++ b/include/asm-mips/sigcontext.h @@ -55,8 +55,14 @@ struct sigcontext { struct sigcontext { unsigned long sc_regs[32]; unsigned long sc_fpregs[32]; - unsigned long sc_hi[4]; - unsigned long sc_lo[4]; + unsigned long sc_mdhi; + unsigned long sc_hi1; + unsigned long sc_hi2; + unsigned long sc_hi3; + unsigned long sc_mdlo; + unsigned long sc_lo1; + unsigned long sc_lo2; + unsigned long sc_lo3; unsigned long sc_pc; unsigned int sc_fpc_csr; unsigned int sc_used_math; From 867a521b4cd6c9d26cd736d85bfe84e10c0c05ac Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 9 May 2006 20:23:49 +0900 Subject: [PATCH 09/17] [MIPS] Fix kgdb exception handler from user mode. Fix a calculation of saved vector address in trap_low. (damage done by lmo f4c72cc737561aab0d9c7f877abbc0a853f1c465) Signed-off-by: Ralf Baechle --- arch/mips/kernel/gdb-low.S | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S index 10f28fb9f008..5fd7a8af0c62 100644 --- a/arch/mips/kernel/gdb-low.S +++ b/arch/mips/kernel/gdb-low.S @@ -54,9 +54,11 @@ */ mfc0 k0, CP0_CAUSE andi k0, k0, 0x7c - add k1, k1, k0 - PTR_L k0, saved_vectors(k1) - jr k0 +#ifdef CONFIG_64BIT + dsll k0, k0, 1 +#endif + PTR_L k1, saved_vectors(k0) + jr k1 nop 1: move k0, sp From 04b6b3b651b2147ab7e94c0d302b5cab07dfab4c Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 10 May 2006 15:36:04 +0900 Subject: [PATCH 10/17] [MIPS] Use generic DWARF_DEBUG When debugging a kernel compiled by gcc 4.1 with gdb 6.4, gdb could not show filename, linenumber, etc. It seems fixed if I used generic DWARF_DEBUG macro. Although gcc 3.x seems work without this change, it would be better to use the generic macro unless there were something MIPS specific. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/vmlinux.lds.S | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 14fa00e3cdfa..73f7acae8b25 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -155,16 +155,9 @@ SECTIONS converted to the new style linker. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } - /* DWARF debug sections. - Symbols in the .debug DWARF section are relative to the beginning of the - section so we begin .debug at 0. It's not clear yet what needs to happen - for the others. */ - .debug 0 : { *(.debug) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .line 0 : { *(.line) } + + DWARF_DEBUG + /* These must appear regardless of . */ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } From 3fa986faad2bb015c3ad6d09a0686016482bc01c Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Tue, 9 May 2006 23:34:53 +0200 Subject: [PATCH 11/17] [MIPS] Create consistency in "system type" selection. The "system type" Kconfig options on MIPS are not consistent. For some platforms, only the name is listed while other entries are prepended with "Support for". Remove this as it doesn't make sense when describing the "system type". Signed-off-by: Martin Michlmayr Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 86 +++++++++++++++++++++++------------------------ 1 file changed, 43 insertions(+), 43 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ee5fbb02b28f..ceca3bcaa9bc 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -13,7 +13,7 @@ choice default SGI_IP22 config MIPS_MTX1 - bool "Support for 4G Systems MTX-1 board" + bool "4G Systems MTX-1 board" select DMA_NONCOHERENT select HW_HAS_PCI select SOC_AU1500 @@ -120,7 +120,7 @@ config MIPS_MIRAGE select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_COBALT - bool "Support for Cobalt Server" + bool "Cobalt Server" select DMA_NONCOHERENT select HW_HAS_PCI select I8259 @@ -132,7 +132,7 @@ config MIPS_COBALT select SYS_SUPPORTS_LITTLE_ENDIAN config MACH_DECSTATION - bool "Support for DECstations" + bool "DECstations" select BOOT_ELF32 select DMA_NONCOHERENT select EARLY_PRINTK @@ -158,7 +158,7 @@ config MACH_DECSTATION otherwise choose R3000. config MIPS_EV64120 - bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" + bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI @@ -175,7 +175,7 @@ config MIPS_EV64120 kernel for this platform. config MIPS_EV96100 - bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" + bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI @@ -195,7 +195,7 @@ config MIPS_EV96100 here if you wish to build a kernel for this platform. config MIPS_IVR - bool "Support for Globespan IVR board" + bool "Globespan IVR board" select DMA_NONCOHERENT select HW_HAS_PCI select ITE_BOARD_GEN @@ -211,7 +211,7 @@ config MIPS_IVR build a kernel for this platform. config MIPS_ITE8172 - bool "Support for ITE 8172G board" + bool "ITE 8172G board" select DMA_NONCOHERENT select HW_HAS_PCI select ITE_BOARD_GEN @@ -228,7 +228,7 @@ config MIPS_ITE8172 a kernel for this platform. config MACH_JAZZ - bool "Support for the Jazz family of machines" + bool "Jazz family of machines" select ARC select ARC32 select ARCH_MAY_HAVE_PC_FDC @@ -246,7 +246,7 @@ config MACH_JAZZ Olivetti M700-10 workstations. config LASAT - bool "Support for LASAT Networks platforms" + bool "LASAT Networks platforms" select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 @@ -258,7 +258,7 @@ config LASAT select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_ATLAS - bool "Support for MIPS Atlas board" + bool "MIPS Atlas board" select BOOT_ELF32 select DMA_NONCOHERENT select IRQ_CPU @@ -283,7 +283,7 @@ config MIPS_ATLAS board. config MIPS_MALTA - bool "Support for MIPS Malta board" + bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select HAVE_STD_PC_SERIAL_PORT @@ -311,7 +311,7 @@ config MIPS_MALTA board. config MIPS_SEAD - bool "Support for MIPS SEAD board (EXPERIMENTAL)" + bool "MIPS SEAD board (EXPERIMENTAL)" depends on EXPERIMENTAL select IRQ_CPU select DMA_NONCOHERENT @@ -328,7 +328,7 @@ config MIPS_SEAD board. config MIPS_SIM - bool 'Support for MIPS simulator (MIPSsim)' + bool 'MIPS simulator (MIPSsim)' select DMA_NONCOHERENT select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 @@ -341,7 +341,7 @@ config MIPS_SIM emulator. config MOMENCO_JAGUAR_ATX - bool "Support for Momentum Jaguar board" + bool "Momentum Jaguar board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI @@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX Momentum Computer . config MOMENCO_OCELOT - bool "Support for Momentum Ocelot board" + bool "Momentum Ocelot board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -378,7 +378,7 @@ config MOMENCO_OCELOT Momentum Computer . config MOMENCO_OCELOT_3 - bool "Support for Momentum Ocelot-3 board" + bool "Momentum Ocelot-3 board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI @@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3 PMC-Sierra Rm79000 core. config MOMENCO_OCELOT_C - bool "Support for Momentum Ocelot-C board" + bool "Momentum Ocelot-C board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C Momentum Computer . config MOMENCO_OCELOT_G - bool "Support for Momentum Ocelot-G board" + bool "Momentum Ocelot-G board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G Momentum Computer . config MIPS_XXS1500 - bool "Support for MyCable XXS1500 board" + bool "MyCable XXS1500 board" select DMA_NONCOHERENT select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_V2PCI - bool "Support for Philips PNX8550 based Viper2-PCI board" + bool "Philips PNX8550 based Viper2-PCI board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_JBS - bool "Support for Philips PNX8550 based JBS board" + bool "Philips PNX8550 based JBS board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN config DDB5074 - bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" + bool "NEC DDB Vrc-5074 (EXPERIMENTAL)" depends on EXPERIMENTAL select DDB5XXX_COMMON select DMA_NONCOHERENT @@ -465,7 +465,7 @@ config DDB5074 evaluation board. config DDB5476 - bool "Support for NEC DDB Vrc-5476" + bool "NEC DDB Vrc-5476" select DDB5XXX_COMMON select DMA_NONCOHERENT select HAVE_STD_PC_SERIAL_PORT @@ -486,7 +486,7 @@ config DDB5476 IDE controller, PS2 keyboard, PS2 mouse, etc. config DDB5477 - bool "Support for NEC DDB Vrc-5477" + bool "NEC DDB Vrc-5477" select DDB5XXX_COMMON select DMA_NONCOHERENT select HW_HAS_PCI @@ -504,13 +504,13 @@ config DDB5477 ether port USB, AC97, PCI, etc. config MACH_VR41XX - bool "Support for NEC VR4100 series based machines" + bool "NEC VR41XX-based machines" select SYS_HAS_CPU_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL config PMC_YOSEMITE - bool "Support for PMC-Sierra Yosemite eval board" + bool "PMC-Sierra Yosemite eval board" select DMA_COHERENT select HW_HAS_PCI select IRQ_CPU @@ -527,7 +527,7 @@ config PMC_YOSEMITE manufactured by PMC-Sierra. config QEMU - bool "Support for Qemu" + bool "Qemu" select DMA_COHERENT select GENERIC_ISA_DMA select HAVE_STD_PC_SERIAL_PORT @@ -547,7 +547,7 @@ config QEMU can be found at http://www.linux-mips.org/wiki/Qemu. config SGI_IP22 - bool "Support for SGI IP22 (Indy/Indigo2)" + bool "SGI IP22 (Indy/Indigo2)" select ARC select ARC32 select BOOT_ELF32 @@ -567,7 +567,7 @@ config SGI_IP22 that runs on these, say Y here. config SGI_IP27 - bool "Support for SGI IP27 (Origin200/2000)" + bool "SGI IP27 (Origin200/2000)" select ARC select ARC64 select BOOT_ELF64 @@ -583,7 +583,7 @@ config SGI_IP27 here. config SGI_IP32 - bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" + bool "SGI IP32 (O2) (EXPERIMENTAL)" depends on EXPERIMENTAL select ARC select ARC32 @@ -604,7 +604,7 @@ config SGI_IP32 If you want this kernel to run on SGI O2 workstation, say Y here. config SIBYTE_BIGSUR - bool "Support for Sibyte BCM91480B-BigSur" + bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 select DMA_COHERENT select PCI_DOMAINS @@ -615,7 +615,7 @@ config SIBYTE_BIGSUR select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SWARM - bool "Support for Sibyte BCM91250A-SWARM" + bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT select SIBYTE_SB1250 @@ -626,7 +626,7 @@ config SIBYTE_SWARM select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SENTOSA - bool "Support for Sibyte BCM91250E-Sentosa" + bool "Sibyte BCM91250E-Sentosa" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -637,7 +637,7 @@ config SIBYTE_SENTOSA select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_RHONE - bool "Support for Sibyte BCM91125E-Rhone" + bool "Sibyte BCM91125E-Rhone" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -648,7 +648,7 @@ config SIBYTE_RHONE select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CARMEL - bool "Support for Sibyte BCM91120x-Carmel" + bool "Sibyte BCM91120x-Carmel" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -659,7 +659,7 @@ config SIBYTE_CARMEL select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_PTSWARM - bool "Support for Sibyte BCM91250PT-PTSWARM" + bool "Sibyte BCM91250PT-PTSWARM" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -671,7 +671,7 @@ config SIBYTE_PTSWARM select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_LITTLESUR - bool "Support for Sibyte BCM91250C2-LittleSur" + bool "Sibyte BCM91250C2-LittleSur" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CRHINE - bool "Support for Sibyte BCM91120C-CRhine" + bool "Sibyte BCM91120C-CRhine" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -694,7 +694,7 @@ config SIBYTE_CRHINE select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CRHONE - bool "Support for Sibyte BCM91125C-CRhone" + bool "Sibyte BCM91125C-CRhone" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -706,7 +706,7 @@ config SIBYTE_CRHONE select SYS_SUPPORTS_LITTLE_ENDIAN config SNI_RM200_PCI - bool "Support for SNI RM200 PCI" + bool "SNI RM200 PCI" select ARC select ARC32 select ARCH_MAY_HAVE_PC_FDC @@ -732,7 +732,7 @@ config SNI_RM200_PCI support this machine type. config TOSHIBA_JMR3927 - bool "Support for Toshiba JMR-TX3927 board" + bool "Toshiba JMR-TX3927 board" select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_TX3927 @@ -743,7 +743,7 @@ config TOSHIBA_JMR3927 select TOSHIBA_BOARDS config TOSHIBA_RBTX4927 - bool "Support for Toshiba TBTX49[23]7 board" + bool "Toshiba TBTX49[23]7 board" select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI @@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927 support this machine type config TOSHIBA_RBTX4938 - bool "Support for Toshiba RBTX4938 board" + bool "Toshiba RBTX4938 board" select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT select GENERIC_ISA_DMA From 78665aaa96fe62b4cee6c226680801c4480aa407 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 11 May 2006 00:41:26 +0900 Subject: [PATCH 12/17] [MIPS] Use generic STABS_DEBUG macro. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/vmlinux.lds.S | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 73f7acae8b25..b84d1f9ce28e 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -151,16 +151,13 @@ SECTIONS /* This is the MIPS specific mdebug section. */ .mdebug : { *(.mdebug) } - /* These are needed for ELF backends which have not yet been - converted to the new style linker. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } + + STABS_DEBUG DWARF_DEBUG /* These must appear regardless of . */ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } - .comment : { *(.comment) } .note : { *(.note) } } From 7f3f1d01a9020cff2cb2390aaee3f8df0d70e203 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 12 May 2006 13:20:06 +0100 Subject: [PATCH 13/17] [MIPS] Fix deadlock on MP with cache aliases. A proper fix would involve introducing the notion of shared caches but at this stage of 2.6.17 that's going to be too intrusive and not needed for current hardware; aside I think some discussion will be needed. So for now on the affected SMP configurations which happen to suffer from cache aliases we make use of the fact that a single cache will be shared by all processors. This solves the deadlock issue and will improve performance by getting rid of the smp_call_function overhead. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 39 ++++++++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 9 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 4420191795f3..570bc4e30fd5 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -29,6 +29,27 @@ #include #include /* for run_uncached() */ + +/* + * Special Variant of smp_call_function for use by cache functions: + * + * o No return value + * o collapses to normal function call on UP kernels + * o collapses to normal function call on systems with a single shared + * primary cache. + */ +static inline void r4k_on_each_cpu(void (*func) (void *info), void *info, + int retry, int wait) +{ + preempt_disable(); + +#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC) + smp_call_function(func, info, retry, wait); +#endif + func(info); + preempt_enable(); +} + /* * Must die. */ @@ -299,7 +320,7 @@ static void r4k_flush_cache_all(void) if (!cpu_has_dc_aliases) return; - on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1); } static inline void local_r4k___flush_cache_all(void * args) @@ -320,7 +341,7 @@ static inline void local_r4k___flush_cache_all(void * args) static void r4k___flush_cache_all(void) { - on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1); + r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1); } static inline void local_r4k_flush_cache_range(void * args) @@ -341,7 +362,7 @@ static inline void local_r4k_flush_cache_range(void * args) static void r4k_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1); } static inline void local_r4k_flush_cache_mm(void * args) @@ -370,7 +391,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm) if (!cpu_has_dc_aliases) return; - on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1); } struct flush_cache_page_args { @@ -461,7 +482,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma, args.addr = addr; args.pfn = pfn; - on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); } static inline void local_r4k_flush_data_cache_page(void * addr) @@ -471,7 +492,7 @@ static inline void local_r4k_flush_data_cache_page(void * addr) static void r4k_flush_data_cache_page(unsigned long addr) { - on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1); + r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1); } struct flush_icache_range_args { @@ -514,7 +535,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end) args.start = start; args.end = end; - on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1); instruction_hazard(); } @@ -590,7 +611,7 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma, args.vma = vma; args.page = page; - on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1); } @@ -689,7 +710,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg) static void r4k_flush_cache_sigtramp(unsigned long addr) { - on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1); } static void r4k_flush_icache_all(void) From 3301edcbd7aab674bd7598e6b97a314b93874ec0 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Mon, 15 May 2006 18:24:57 +0100 Subject: [PATCH 14/17] [MIPS] DSP and MDMX share the same config flag bit. Clarify comment. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- include/asm-mips/mipsregs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index a2ef579f6b1a..5af7517fce8a 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -291,7 +291,7 @@ #define ST0_DL (_ULCAST_(1) << 24) /* - * Enable the MIPS DSP ASE + * Enable the MIPS MDMX and DSP ASEs */ #define ST0_MX 0x01000000 From ca30225e9e4c0c74fe781a9fd1d1ad5f85b29c60 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Mon, 15 May 2006 18:27:03 +0100 Subject: [PATCH 15/17] [MIPS] Update/Fix instruction definitions A small bugfix for up to now unused instruction definitions, and a somewhat larger update to cover MIPS32R2 instructions. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- include/asm-mips/inst.h | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/include/asm-mips/inst.h b/include/asm-mips/inst.h index e0745f4ff624..1ed8d0f62577 100644 --- a/include/asm-mips/inst.h +++ b/include/asm-mips/inst.h @@ -6,6 +6,7 @@ * for more details. * * Copyright (C) 1996, 2000 by Ralf Baechle + * Copyright (C) 2006 by Thiemo Seufer */ #ifndef _ASM_INST_H #define _ASM_INST_H @@ -21,14 +22,14 @@ enum major_op { cop0_op, cop1_op, cop2_op, cop1x_op, beql_op, bnel_op, blezl_op, bgtzl_op, daddi_op, daddiu_op, ldl_op, ldr_op, - major_1c_op, jalx_op, major_1e_op, major_1f_op, + spec2_op, jalx_op, mdmx_op, spec3_op, lb_op, lh_op, lwl_op, lw_op, lbu_op, lhu_op, lwr_op, lwu_op, sb_op, sh_op, swl_op, sw_op, sdl_op, sdr_op, swr_op, cache_op, ll_op, lwc1_op, lwc2_op, pref_op, lld_op, ldc1_op, ldc2_op, ld_op, - sc_op, swc1_op, swc2_op, rdhwr_op, + sc_op, swc1_op, swc2_op, major_3b_op, scd_op, sdc1_op, sdc2_op, sd_op }; @@ -37,7 +38,7 @@ enum major_op { */ enum spec_op { sll_op, movc_op, srl_op, sra_op, - sllv_op, srlv_op, srav_op, spec1_unused_op, /* Opcode 0x07 is unused */ + sllv_op, pmon_op, srlv_op, srav_op, jr_op, jalr_op, movz_op, movn_op, syscall_op, break_op, spim_op, sync_op, mfhi_op, mthi_op, mflo_op, mtlo_op, @@ -54,6 +55,28 @@ enum spec_op { dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op }; +/* + * func field of spec2 opcode. + */ +enum spec2_op { + madd_op, maddu_op, mul_op, spec2_3_unused_op, + msub_op, msubu_op, /* more unused ops */ + clz_op = 0x20, clo_op, + dclz_op = 0x24, dclo_op, + sdbpp_op = 0x3f +}; + +/* + * func field of spec3 opcode. + */ +enum spec3_op { + ext_op, dextm_op, dextu_op, dext_op, + ins_op, dinsm_op, dinsu_op, dins_op, + bshfl_op = 0x20, + dbshfl_op = 0x24, + rdhwr_op = 0x3f +}; + /* * rt field of bcond opcodes. */ @@ -151,8 +174,8 @@ enum cop1x_func { * func field for mad opcodes (MIPS IV). */ enum mad_func { - madd_op = 0x08, msub_op = 0x0a, - nmadd_op = 0x0c, nmsub_op = 0x0e + madd_fp_op = 0x08, msub_fp_op = 0x0a, + nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e }; /* From 714bfad60f3a127147aba76e9c57860c26b1450d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 May 2006 14:04:30 +0100 Subject: [PATCH 16/17] [MIPS] Remove EXPERIMENTAL from PAGE_SIZE_16KB This is known to be working fine for a while. While at it also update and fix the help texts. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ceca3bcaa9bc..e8ff09fe73d9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1411,13 +1411,12 @@ config PAGE_SIZE_8KB config PAGE_SIZE_16KB bool "16kB" - depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX + depends on !CPU_R3000 && !CPU_TX39XX help Using 16kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on - all non-R3000 family processor. Not that at the time of this - writing this option is still high experimental; there are also - issues with compatibility of user applications. + all non-R3000 family processors. Note that you will need a suitable + Linux distribution to support this. config PAGE_SIZE_64KB bool "64kB" @@ -1426,8 +1425,7 @@ config PAGE_SIZE_64KB Using 64kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on all non-R3000 family processor. Not that at the time of this - writing this option is still high experimental; there are also - issues with compatibility of user applications. + writing this option is still high experimental. endchoice From 44d921b246923380f26b8010e47ac5dfe48fcec5 Mon Sep 17 00:00:00 2001 From: Kumba Date: Tue, 16 May 2006 22:23:59 -0400 Subject: [PATCH 17/17] [MIPS] Treat R14000 like R10000. Signed-off-by: Joshua Kinard Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 9 +++++++++ arch/mips/kernel/proc.c | 1 + arch/mips/mm/c-r4k.c | 4 ++++ arch/mips/mm/pg-r4k.c | 1 + arch/mips/mm/tlbex.c | 1 + include/asm-mips/cpu.h | 4 +++- 6 files changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 17184921b71d..bef3e2dc7c52 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -433,6 +433,15 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) MIPS_CPU_LLSC; c->tlbsize = 64; break; + case PRID_IMP_R14000: + c->cputype = CPU_R14000; + c->isa_level = MIPS_CPU_ISA_IV; + c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | + MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_COUNTER | MIPS_CPU_WATCH | + MIPS_CPU_LLSC; + c->tlbsize = 64; + break; } } diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 197952c44467..9def554f335b 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -42,6 +42,7 @@ static const char *cpu_name[] = { [CPU_R8000] = "R8000", [CPU_R10000] = "R10000", [CPU_R12000] = "R12000", + [CPU_R14000] = "R14000", [CPU_R4300] = "R4300", [CPU_R4650] = "R4650", [CPU_R4700] = "R4700", diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 570bc4e30fd5..6b3541769602 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -335,6 +335,7 @@ static inline void local_r4k___flush_cache_all(void * args) case CPU_R4400MC: case CPU_R10000: case CPU_R12000: + case CPU_R14000: r4k_blast_scache(); } } @@ -833,6 +834,7 @@ static void __init probe_pcache(void) case CPU_R10000: case CPU_R12000: + case CPU_R14000: icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29)); c->icache.linesz = 64; c->icache.ways = 2; @@ -986,6 +988,7 @@ static void __init probe_pcache(void) c->dcache.flags |= MIPS_CACHE_PINDEX; case CPU_R10000: case CPU_R12000: + case CPU_R14000: case CPU_SB1: break; case CPU_24K: @@ -1113,6 +1116,7 @@ static void __init setup_scache(void) case CPU_R10000: case CPU_R12000: + case CPU_R14000: scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16); c->scache.linesz = 64 << ((config >> 13) & 1); c->scache.ways = 2; diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c index e4390dc3eb48..b7c749232ffe 100644 --- a/arch/mips/mm/pg-r4k.c +++ b/arch/mips/mm/pg-r4k.c @@ -357,6 +357,7 @@ void __init build_clear_page(void) case CPU_R10000: case CPU_R12000: + case CPU_R14000: pref_src_mode = Pref_LoadStreamed; pref_dst_mode = Pref_StoreStreamed; break; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 4ff07e2efcb3..54507be2ab5b 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -875,6 +875,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_R10000: case CPU_R12000: + case CPU_R14000: case CPU_4KC: case CPU_SB1: case CPU_SB1A: diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index 0117138149bc..dff2a0a52f8f 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -51,6 +51,7 @@ #define PRID_IMP_R4300 0x0b00 #define PRID_IMP_VR41XX 0x0c00 #define PRID_IMP_R12000 0x0e00 +#define PRID_IMP_R14000 0x0f00 #define PRID_IMP_R8000 0x1000 #define PRID_IMP_PR4450 0x1200 #define PRID_IMP_R4600 0x2000 @@ -198,7 +199,8 @@ #define CPU_PR4450 61 #define CPU_SB1A 62 #define CPU_74K 63 -#define CPU_LAST 63 +#define CPU_R14000 64 +#define CPU_LAST 64 /* * ISA Level encodings