diff --git a/Documentation/PCI/sysfs-pci.rst b/Documentation/PCI/sysfs-pci.rst index 742fbd21dc1f..f495185aa88a 100644 --- a/Documentation/PCI/sysfs-pci.rst +++ b/Documentation/PCI/sysfs-pci.rst @@ -125,7 +125,7 @@ implementation of that functionality. To support the historical interface of mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP. Alternatively, platforms which set HAVE_PCI_MMAP may provide their own -implementation of pci_mmap_page_range() instead of defining +implementation of pci_mmap_resource_range() instead of defining ARCH_GENERIC_PCI_MMAP_RESOURCE. Platforms which support write-combining maps of PCI resources must define diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h index 4deddf430e5d..dff90dce6cb7 100644 --- a/arch/sparc/include/asm/pci.h +++ b/arch/sparc/include/asm/pci.h @@ -37,6 +37,7 @@ static inline int pci_proc_domain(struct pci_bus *bus) #define HAVE_PCI_MMAP #define arch_can_pci_mmap_io() 1 #define HAVE_ARCH_PCI_GET_UNMAPPED_AREA +#define ARCH_GENERIC_PCI_MMAP_RESOURCE #define get_pci_unmapped_area get_fb_unmapped_area #endif /* CONFIG_SPARC64 */ diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 31b0c1983286..cb1ef25116e9 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -751,156 +751,15 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) } /* Platform support for /proc/bus/pci/X/Y mmap()s. */ - -/* If the user uses a host-bridge as the PCI device, he may use - * this to perform a raw mmap() of the I/O or MEM space behind - * that controller. - * - * This can be useful for execution of x86 PCI bios initialization code - * on a PCI card, like the xfree86 int10 stuff does. - */ -static int __pci_mmap_make_offset_bus(struct pci_dev *pdev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state) +int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma) { struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; - unsigned long space_size, user_offset, user_size; + resource_size_t ioaddr = pci_resource_start(pdev, bar); - if (mmap_state == pci_mmap_io) { - space_size = resource_size(&pbm->io_space); - } else { - space_size = resource_size(&pbm->mem_space); - } - - /* Make sure the request is in range. */ - user_offset = vma->vm_pgoff << PAGE_SHIFT; - user_size = vma->vm_end - vma->vm_start; - - if (user_offset >= space_size || - (user_offset + user_size) > space_size) + if (!pbm) return -EINVAL; - if (mmap_state == pci_mmap_io) { - vma->vm_pgoff = (pbm->io_space.start + - user_offset) >> PAGE_SHIFT; - } else { - vma->vm_pgoff = (pbm->mem_space.start + - user_offset) >> PAGE_SHIFT; - } - - return 0; -} - -/* Adjust vm_pgoff of VMA such that it is the physical page offset - * corresponding to the 32-bit pci bus offset for DEV requested by the user. - * - * Basically, the user finds the base address for his device which he wishes - * to mmap. They read the 32-bit value from the config space base register, - * add whatever PAGE_SIZE multiple offset they wish, and feed this into the - * offset parameter of mmap on /proc/bus/pci/XXX for that device. - * - * Returns negative error code on failure, zero on success. - */ -static int __pci_mmap_make_offset(struct pci_dev *pdev, - struct vm_area_struct *vma, - enum pci_mmap_state mmap_state) -{ - unsigned long user_paddr, user_size; - int i, err; - - /* First compute the physical address in vma->vm_pgoff, - * making sure the user offset is within range in the - * appropriate PCI space. - */ - err = __pci_mmap_make_offset_bus(pdev, vma, mmap_state); - if (err) - return err; - - /* If this is a mapping on a host bridge, any address - * is OK. - */ - if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_HOST) - return err; - - /* Otherwise make sure it's in the range for one of the - * device's resources. - */ - user_paddr = vma->vm_pgoff << PAGE_SHIFT; - user_size = vma->vm_end - vma->vm_start; - - for (i = 0; i <= PCI_ROM_RESOURCE; i++) { - struct resource *rp = &pdev->resource[i]; - resource_size_t aligned_end; - - /* Active? */ - if (!rp->flags) - continue; - - /* Same type? */ - if (i == PCI_ROM_RESOURCE) { - if (mmap_state != pci_mmap_mem) - continue; - } else { - if ((mmap_state == pci_mmap_io && - (rp->flags & IORESOURCE_IO) == 0) || - (mmap_state == pci_mmap_mem && - (rp->flags & IORESOURCE_MEM) == 0)) - continue; - } - - /* Align the resource end to the next page address. - * PAGE_SIZE intentionally added instead of (PAGE_SIZE - 1), - * because actually we need the address of the next byte - * after rp->end. - */ - aligned_end = (rp->end + PAGE_SIZE) & PAGE_MASK; - - if ((rp->start <= user_paddr) && - (user_paddr + user_size) <= aligned_end) - break; - } - - if (i > PCI_ROM_RESOURCE) - return -EINVAL; - - return 0; -} - -/* Set vm_page_prot of VMA, as appropriate for this architecture, for a pci - * device mapping. - */ -static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state) -{ - /* Our io_remap_pfn_range takes care of this, do nothing. */ -} - -/* Perform the actual remap of the pages for a PCI device mapping, as appropriate - * for this architecture. The region in the process to map is described by vm_start - * and vm_end members of VMA, the base physical address is found in vm_pgoff. - * The pci device structure is provided so that architectures may make mapping - * decisions on a per-device or per-bus basis. - * - * Returns a negative error code on failure, zero on success. - */ -int pci_mmap_page_range(struct pci_dev *dev, int bar, - struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - int ret; - - ret = __pci_mmap_make_offset(dev, vma, mmap_state); - if (ret < 0) - return ret; - - __pci_mmap_set_pgprot(dev, vma, mmap_state); - - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - ret = io_remap_pfn_range(vma, vma->vm_start, - vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); - if (ret) - return ret; + vma->vm_pgoff += (ioaddr + pbm->io_space.start) >> PAGE_SHIFT; return 0; } diff --git a/drivers/pci/mmap.c b/drivers/pci/mmap.c index b8c9011987f4..4504039056d1 100644 --- a/drivers/pci/mmap.c +++ b/drivers/pci/mmap.c @@ -13,27 +13,6 @@ #ifdef ARCH_GENERIC_PCI_MMAP_RESOURCE -/* - * Modern setup: generic pci_mmap_resource_range(), and implement the legacy - * pci_mmap_page_range() (if needed) as a wrapper round it. - */ - -#ifdef HAVE_PCI_MMAP -int pci_mmap_page_range(struct pci_dev *pdev, int bar, - struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - resource_size_t start, end; - - pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end); - - /* Adjust vm_pgoff to be the offset within the resource */ - vma->vm_pgoff -= start >> PAGE_SHIFT; - return pci_mmap_resource_range(pdev, bar, vma, mmap_state, - write_combine); -} -#endif - static const struct vm_operations_struct pci_phys_vm_ops = { #ifdef CONFIG_HAVE_IOREMAP_PROT .access = generic_access_phys, @@ -70,27 +49,4 @@ int pci_mmap_resource_range(struct pci_dev *pdev, int bar, vma->vm_page_prot); } -#elif defined(HAVE_PCI_MMAP) /* && !ARCH_GENERIC_PCI_MMAP_RESOURCE */ - -/* - * Legacy setup: Implement pci_mmap_resource_range() as a wrapper around - * the architecture's pci_mmap_page_range(), converting to "user visible" - * addresses as necessary. - */ - -int pci_mmap_resource_range(struct pci_dev *pdev, int bar, - struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - resource_size_t start, end; - - /* - * pci_mmap_page_range() expects the same kind of entry as coming - * from /proc/bus/pci/ which is a "user visible" value. If this is - * different from the resource itself, arch will do necessary fixup. - */ - pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end); - vma->vm_pgoff += start >> PAGE_SHIFT; - return pci_mmap_page_range(pdev, bar, vma, mmap_state, write_combine); -} #endif diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 31b26d8ea6cc..f967709082d6 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -244,6 +244,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma) { struct pci_dev *dev = pde_data(file_inode(file)); struct pci_filp_private *fpriv = file->private_data; + resource_size_t start, end; int i, ret, write_combine = 0, res_bit = IORESOURCE_MEM; if (!capable(CAP_SYS_RAWIO) || @@ -278,7 +279,11 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma) iomem_is_exclusive(dev->resource[i].start)) return -EINVAL; - ret = pci_mmap_page_range(dev, i, vma, + pci_resource_to_user(dev, i, &dev->resource[i], &start, &end); + + /* Adjust vm_pgoff to be the offset within the resource */ + vma->vm_pgoff -= start >> PAGE_SHIFT; + ret = pci_mmap_resource_range(dev, i, vma, fpriv->mmap_state, write_combine); if (ret < 0) return ret; diff --git a/include/linux/pci.h b/include/linux/pci.h index 81a57b498f22..060af91bafcd 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1909,24 +1909,14 @@ pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs, #include -/* These two functions provide almost identical functionality. Depending - * on the architecture, one will be implemented as a wrapper around the - * other (in drivers/pci/mmap.c). - * +/* * pci_mmap_resource_range() maps a specific BAR, and vm->vm_pgoff * is expected to be an offset within that region. * - * pci_mmap_page_range() is the legacy architecture-specific interface, - * which accepts a "user visible" resource address converted by - * pci_resource_to_user(), as used in the legacy mmap() interface in - * /proc/bus/pci/. */ int pci_mmap_resource_range(struct pci_dev *dev, int bar, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); -int pci_mmap_page_range(struct pci_dev *pdev, int bar, - struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); #ifndef arch_can_pci_mmap_wc #define arch_can_pci_mmap_wc() 0