ARM: dts: Add basic support for omap3 LDP zoom1 labrador
Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen and GPIO keys work. For twl4030-keypad we're still missing the binding, but support for that should be trivial to add once the driver has been updated. MUSB I'm pretty sure I got got to enumerate once, but I suspect the battery charging somehow disrupts it and it's not enumerating in general for some reason. Patches are welcome to improve things if people are still using this board. For reference, here's some more info on this old board: http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" <bcousson@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren
parent
a900f51646
commit
bd5fc6fa65
|
|
@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
|
|||
omap3-beagle-xm.dtb \
|
||||
omap3-evm.dtb \
|
||||
omap3-evm-37xx.dtb \
|
||||
omap3-ldp.dtb \
|
||||
omap3-n900.dtb \
|
||||
omap3-n9.dtb \
|
||||
omap3-n950.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,231 @@
|
|||
/*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "omap-gpmc-smsc911x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI OMAP3430 LDP (Zoom1 Labrador)";
|
||||
compatible = "ti,omap3-ldp", "ti,omap3";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&vcc>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_key_pins>;
|
||||
|
||||
key_enter {
|
||||
label = "enter";
|
||||
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
|
||||
linux,code = <0x0107001c>; /* KEY_ENTER */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_f1 {
|
||||
label = "f1";
|
||||
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
|
||||
linux,code = <0x0303003b>; /* KEY_F1 */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_f2 {
|
||||
label = "f2";
|
||||
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
|
||||
linux,code = <0x0403003c>; /* KEY_F2 */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_f3 {
|
||||
label = "f3";
|
||||
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
|
||||
linux,code = <0x0503003d>; /* KEY_F3 */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_f4 {
|
||||
label = "f4";
|
||||
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
|
||||
linux,code = <0x0704003e>; /* KEY_F4 */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_left {
|
||||
label = "left";
|
||||
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
|
||||
linux,code = <0x04070069>; /* KEY_LEFT */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_right {
|
||||
label = "right";
|
||||
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
|
||||
linux,code = <0x0507006a>; /* KEY_RIGHT */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_up {
|
||||
label = "up";
|
||||
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
|
||||
linux,code = <0x06070067>; /* KEY_UP */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
key_down {
|
||||
label = "down";
|
||||
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
|
||||
linux,code = <0x0707006c>; /* KEY_DOWN */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x00000000 0x01000000>,
|
||||
<1 0 0x08000000 0x01000000>;
|
||||
|
||||
nand@0,0 {
|
||||
linux,mtd-name= "micron,nand";
|
||||
reg = <0 0 0>;
|
||||
nand-bus-width = <16>;
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
gpmc,cs-wr-off-ns = <44>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <34>;
|
||||
gpmc,adv-wr-off-ns = <44>;
|
||||
gpmc,we-off-ns = <40>;
|
||||
gpmc,oe-off-ns = <54>;
|
||||
gpmc,access-ns = <64>;
|
||||
gpmc,rd-cycle-ns = <82>;
|
||||
gpmc,wr-cycle-ns = <82>;
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "X-Loader";
|
||||
reg = <0 0x80000>;
|
||||
};
|
||||
partition@80000 {
|
||||
label = "U-Boot";
|
||||
reg = <0x80000 0x140000>;
|
||||
};
|
||||
partition@1c0000 {
|
||||
label = "Environment";
|
||||
reg = <0x1c0000 0x40000>;
|
||||
};
|
||||
partition@200000 {
|
||||
label = "Kernel";
|
||||
reg = <0x200000 0x1e00000>;
|
||||
};
|
||||
partition@2000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x2000000 0xe000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@gpmc {
|
||||
interrupt-parent = <&gpio5>;
|
||||
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
||||
reg = <1 0 0xff>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <2600000>;
|
||||
|
||||
twl: twl@48 {
|
||||
reg = <0x48>;
|
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||
interrupt-parent = <&intc>;
|
||||
};
|
||||
};
|
||||
|
||||
#include "twl4030.dtsi"
|
||||
#include "twl4030_omap3.dtsi"
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <&vmmc1>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
gpio_key_pins: pinmux_gpio_key_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
|
||||
0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
|
||||
0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
|
||||
0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
|
||||
0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
|
||||
0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
|
||||
0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
|
||||
0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
|
||||
0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
|
||||
>;
|
||||
};
|
||||
|
||||
musb_pins: pinmux_musb_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
|
||||
0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
|
||||
0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
|
||||
0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
|
||||
0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
|
||||
0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
|
||||
0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
|
||||
0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
|
||||
0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
|
||||
0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
|
||||
0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
|
||||
0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_otg_hs {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&musb_pins>;
|
||||
interface-type = <0>;
|
||||
usb-phy = <&usb2_phy>;
|
||||
mode = <3>;
|
||||
power = <50>;
|
||||
};
|
||||
|
||||
&vaux1 {
|
||||
/* Needed for ads7846 */
|
||||
regulator-name = "vcc";
|
||||
};
|
||||
|
||||
&vpll2 {
|
||||
/* Needed for DSS */
|
||||
regulator-name = "vdds_dsi";
|
||||
};
|
||||
Loading…
Reference in New Issue