mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

drm/kmb: Enable alpha blended second plane 

Enable one additional plane that is alpha blended on top
of the primary plane.

This also fixes the below warnings when building with
-Warray-bounds:

drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]
drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]
drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]

v2: corrected previous patch dependecies so it builds

Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210728003126.1425028-13-anitha.chrisanthus@intel.com/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This commit is contained in:
Edmund Dea 2020-12-04 14:34:29 -08:00 committed by Maarten Lankhorst
parent 9e1ff307c7
commit c026565fe9
5 changed files with 87 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/gpu/drm/kmb/kmb_drv.c
View File

@ -172,10 +172,10 @@ static int kmb_setup_mode_config(struct drm_device *drm)
ret = drmm_mode_config_init(drm);
if (ret)
return ret;
drm->mode_config.min_width = KMB_MIN_WIDTH;
drm->mode_config.min_height = KMB_MIN_HEIGHT;
drm->mode_config.max_width = KMB_MAX_WIDTH;
drm->mode_config.max_height = KMB_MAX_HEIGHT;
drm->mode_config.min_width = KMB_FB_MIN_WIDTH;
drm->mode_config.min_height = KMB_FB_MIN_HEIGHT;
drm->mode_config.max_width = KMB_FB_MAX_WIDTH;
drm->mode_config.max_height = KMB_FB_MAX_HEIGHT;
drm->mode_config.funcs = &kmb_mode_config_funcs;
ret = kmb_setup_crtc(drm);

5
drivers/gpu/drm/kmb/kmb_drv.h
View File

@ -20,6 +20,11 @@
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 1
#define KMB_FB_MAX_WIDTH 1920
#define KMB_FB_MAX_HEIGHT 1080
#define KMB_FB_MIN_WIDTH 1
#define KMB_FB_MIN_HEIGHT 1
#define KMB_LCD_DEFAULT_CLK 200000000
#define KMB_SYS_CLK_MHZ 500

81
drivers/gpu/drm/kmb/kmb_plane.c
View File

@ -94,9 +94,10 @@ static int kmb_plane_atomic_check(struct drm_plane *plane,
if (ret)
return ret;
if (new_plane_state->crtc_w > KMB_MAX_WIDTH || new_plane_state->crtc_h > KMB_MAX_HEIGHT)
return -EINVAL;
if (new_plane_state->crtc_w < KMB_MIN_WIDTH || new_plane_state->crtc_h < KMB_MIN_HEIGHT)
if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH ||
new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT ||
new_plane_state->crtc_w < KMB_FB_MIN_WIDTH ||
new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT)
return -EINVAL;
can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
crtc_state =
@ -277,6 +278,44 @@ static void config_csc(struct kmb_drm_private *kmb, int plane_id)
kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]);
}
static void kmb_plane_set_alpha(struct kmb_drm_private *kmb,
const struct drm_plane_state *state,
unsigned char plane_id,
unsigned int *val)
{
u16 plane_alpha = state->alpha;
u16 pixel_blend_mode = state->pixel_blend_mode;
int has_alpha = state->fb->format->has_alpha;
if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE)
*val |= LCD_LAYER_ALPHA_STATIC;
if (has_alpha) {
switch (pixel_blend_mode) {
case DRM_MODE_BLEND_PIXEL_NONE:
break;
case DRM_MODE_BLEND_PREMULTI:
*val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT;
break;
case DRM_MODE_BLEND_COVERAGE:
*val |= LCD_LAYER_ALPHA_EMBED;
break;
default:
DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n",
__stringify(pixel_blend_mode),
(long)pixel_blend_mode);
break;
}
}
if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) {
*val &= LCD_LAYER_ALPHA_DISABLED;
return;
}
kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha);
}
static void kmb_plane_atomic_update(struct drm_plane *plane,
struct drm_atomic_state *state)
{
@ -303,11 +342,12 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
fb = new_plane_state->fb;
if (!fb)
return;
num_planes = fb->format->num_planes;
kmb_plane = to_kmb_plane(plane);
plane_id = kmb_plane->id;
kmb = to_kmb(plane->dev);
plane_id = kmb_plane->id;
spin_lock_irq(&kmb->irq_lock);
if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
@ -400,20 +440,32 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
config_csc(kmb, plane_id);
}
kmb_plane_set_alpha(kmb, plane->state, plane_id, &val);
kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val);
/* Configure LCD_CONTROL */
ctrl = kmb_read_lcd(kmb, LCD_CONTROL);
/* Set layer blending config */
ctrl &= ~LCD_CTRL_ALPHA_ALL;
ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 |
LCD_CTRL_ALPHA_BLEND_VL2;
ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE;
switch (plane_id) {
case LAYER_0:
ctrl = LCD_CTRL_VL1_ENABLE;
ctrl |= LCD_CTRL_VL1_ENABLE;
break;
case LAYER_1:
ctrl = LCD_CTRL_VL2_ENABLE;
ctrl |= LCD_CTRL_VL2_ENABLE;
break;
case LAYER_2:
ctrl = LCD_CTRL_GL1_ENABLE;
ctrl |= LCD_CTRL_GL1_ENABLE;
break;
case LAYER_3:
ctrl = LCD_CTRL_GL2_ENABLE;
ctrl |= LCD_CTRL_GL2_ENABLE;
break;
}
@ -425,7 +477,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
*/
ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL;
kmb_set_bitmask_lcd(kmb, LCD_CONTROL, ctrl);
kmb_write_lcd(kmb, LCD_CONTROL, ctrl);
/* Enable pipeline AXI read transactions for the DMA
* after setting graphics layers. This must be done
@ -490,6 +542,9 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm)
enum drm_plane_type plane_type;
const u32 *plane_formats;
int num_plane_formats;
unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
BIT(DRM_MODE_BLEND_PREMULTI) |
BIT(DRM_MODE_BLEND_COVERAGE);
for (i = 0; i < KMB_MAX_PLANES; i++) {
plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL);
@ -521,8 +576,16 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm)
drm_dbg(drm, "%s : %d i=%d type=%d",
__func__, __LINE__,
i, plane_type);
drm_plane_create_alpha_property(&plane->base_plane);
drm_plane_create_blend_mode_property(&plane->base_plane,
blend_caps);
drm_plane_create_zpos_immutable_property(&plane->base_plane, i);
drm_plane_helper_add(&plane->base_plane,
&kmb_plane_helper_funcs);
if (plane_type == DRM_PLANE_TYPE_PRIMARY) {
primary = plane;
kmb->plane = plane;

5
drivers/gpu/drm/kmb/kmb_plane.h
View File

@ -35,6 +35,9 @@
#define POSSIBLE_CRTCS 1
#define to_kmb_plane(x) container_of(x, struct kmb_plane, base_plane)
#define POSSIBLE_CRTCS 1
#define KMB_MAX_PLANES 2
enum layer_id {
LAYER_0,
LAYER_1,
@ -43,8 +46,6 @@ enum layer_id {
/* KMB_MAX_PLANES */
};
#define KMB_MAX_PLANES 1
enum sub_plane_id {
Y_PLANE,
U_PLANE,

3
drivers/gpu/drm/kmb/kmb_regs.h
View File

@ -43,8 +43,10 @@
#define LCD_CTRL_OUTPUT_ENABLED BIT(19)
#define LCD_CTRL_BPORCH_ENABLE BIT(21)
#define LCD_CTRL_FPORCH_ENABLE BIT(22)
#define LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE BIT(23)
#define LCD_CTRL_PIPELINE_DMA BIT(28)
#define LCD_CTRL_VHSYNC_IDLE_LVL BIT(31)
#define LCD_CTRL_ALPHA_ALL (0xff << 6)
/* interrupts */
#define LCD_INT_STATUS (0x4 * 0x001)
@ -115,6 +117,7 @@
#define LCD_LAYER_ALPHA_EMBED BIT(5)
#define LCD_LAYER_ALPHA_COMBI (LCD_LAYER_ALPHA_STATIC | \
LCD_LAYER_ALPHA_EMBED)
#define LCD_LAYER_ALPHA_DISABLED ~(LCD_LAYER_ALPHA_COMBI)
/* RGB multiplied with alpha */
#define LCD_LAYER_ALPHA_PREMULT BIT(6)
#define LCD_LAYER_INVERT_COL BIT(7)