[ARM] 4912/2: [AT91] Endrelia audio driver must use GPIO interface

The SoC audio driver for the Endrelia ETI_B1 board should not access
the PIO controller directly, but must rather use the AT91 GPIO
interface.

(This is updated version of patch with removed trailing whitespace)

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor 2008-04-08 21:33:07 +01:00 committed by Russell King
parent 5b7659d190
commit c21098ea56

View file

@ -33,8 +33,7 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
#include <asm/hardware.h>
#include <asm/arch/gpio.h>
#include "../codecs/wm8731.h"
@ -47,13 +46,6 @@
#define DBG(x...)
#endif
#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
static struct clk *pck1_clk;
static struct clk *pllb_clk;
@ -276,7 +268,6 @@ static struct platform_device *eti_b1_snd_device;
static int __init eti_b1_init(void)
{
int ret;
u32 ssc_pio_lines;
struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
@ -310,19 +301,12 @@ static int __init eti_b1_init(void)
goto fail_io_unmap;
}
ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
| AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
/* Reset all PIO registers and assign lines to peripheral A */
at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
/*
* Set PCK1 parent to PLLB and its rate to 12 Mhz.