scsi: fnic: correct speed display and add support for 25,40 and 100G

Setting speed based on the vinc device parameter read during
linkup. Also adding support to display 25,40 and 100G

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Satish Kharat 2017-06-26 17:48:44 -07:00 committed by Martin K. Petersen
parent 43caa03fec
commit c22fa50b2d
3 changed files with 45 additions and 2 deletions

View File

@ -65,6 +65,30 @@ void fnic_handle_link(struct work_struct *work)
fnic->link_status = vnic_dev_link_status(fnic->vdev);
fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev);
switch (vnic_dev_port_speed(fnic->vdev)) {
case DCEM_PORTSPEED_10G:
fc_host_speed(fnic->lport->host) = FC_PORTSPEED_10GBIT;
fnic->lport->link_supported_speeds = FC_PORTSPEED_10GBIT;
break;
case DCEM_PORTSPEED_25G:
fc_host_speed(fnic->lport->host) = FC_PORTSPEED_25GBIT;
fnic->lport->link_supported_speeds = FC_PORTSPEED_25GBIT;
break;
case DCEM_PORTSPEED_40G:
case DCEM_PORTSPEED_4x10G:
fc_host_speed(fnic->lport->host) = FC_PORTSPEED_40GBIT;
fnic->lport->link_supported_speeds = FC_PORTSPEED_40GBIT;
break;
case DCEM_PORTSPEED_100G:
fc_host_speed(fnic->lport->host) = FC_PORTSPEED_100GBIT;
fnic->lport->link_supported_speeds = FC_PORTSPEED_100GBIT;
break;
default:
fc_host_speed(fnic->lport->host) = FC_PORTSPEED_UNKNOWN;
fnic->lport->link_supported_speeds = FC_PORTSPEED_UNKNOWN;
break;
}
if (old_link_status == fnic->link_status) {
if (!fnic->link_status) {
/* DOWN -> DOWN */

View File

@ -66,4 +66,13 @@ struct fnic_io_req {
struct completion *dr_done; /* completion for device reset */
};
enum fnic_port_speeds {
DCEM_PORTSPEED_NONE = 0,
DCEM_PORTSPEED_1G = 1000,
DCEM_PORTSPEED_10G = 10000,
DCEM_PORTSPEED_40G = 40000,
DCEM_PORTSPEED_4x10G = 41000,
DCEM_PORTSPEED_25G = 25000,
DCEM_PORTSPEED_100G = 100000,
};
#endif /* _FNIC_IO_H_ */

View File

@ -176,11 +176,21 @@ static void fnic_get_host_speed(struct Scsi_Host *shost)
/* Add in other values as they get defined in fw */
switch (port_speed) {
case 10000:
case DCEM_PORTSPEED_10G:
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
break;
case DCEM_PORTSPEED_25G:
fc_host_speed(shost) = FC_PORTSPEED_25GBIT;
break;
case DCEM_PORTSPEED_40G:
case DCEM_PORTSPEED_4x10G:
fc_host_speed(shost) = FC_PORTSPEED_40GBIT;
break;
case DCEM_PORTSPEED_100G:
fc_host_speed(shost) = FC_PORTSPEED_100GBIT;
break;
default:
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
}
}