ARM: pxa2xx: Fix GPIO descriptor tables

Laurence reports:

"Kernel >5.18 on Zaurus has a bug where the power management code can't
talk to devices, emitting the following errors:

sharpsl-pm sharpsl-pm: Error: AC check failed: voltage -22.
sharpsl-pm sharpsl-pm: Charging Error!
sharpsl-pm sharpsl-pm: Warning: Cannot read main battery!

Looking at the recent changes, I found that commit 31455bbda2 ("spi:
pxa2xx_spi: Convert to use GPIO descriptors") replaced the deprecated
SPI chip select platform device code with a gpiod lookup table. However,
this didn't seem to work until I changed the `dev_id` member from the
device name to the bus id. I'm not entirely sure why this is necessary,
but I suspect it is related to the fact that in sysfs SPI devices are
attached under /sys/devices/.../dev_name/spi_master/spiB/spiB.C, rather
than directly to the device."

After reviewing the change I conclude that the same fix is needed
for all affected boards.

Fixes: 31455bbda2 ("spi: pxa2xx_spi: Convert to use GPIO descriptors")
Reported-by: Laurence de Bruxelles <lfdebrux@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220722114611.1517414-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Linus Walleij 2022-07-22 13:46:11 +02:00 committed by Arnd Bergmann
parent 430d31bb2e
commit c5cdb92869
No known key found for this signature in database
GPG Key ID: 9A6C79EFE60018D9
7 changed files with 9 additions and 9 deletions

View File

@ -549,7 +549,7 @@ static struct pxa2xx_spi_controller corgi_spi_info = {
};
static struct gpiod_lookup_table corgi_spi_gpio_table = {
.dev_id = "pxa2xx-spi.1",
.dev_id = "spi1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),

View File

@ -635,7 +635,7 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
};
static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
.dev_id = "pxa2xx-spi.2",
.dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },

View File

@ -140,7 +140,7 @@ struct platform_device pxa_spi_ssp4 = {
};
static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
.dev_id = "pxa2xx-spi.3",
.dev_id = "spi3",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
@ -149,7 +149,7 @@ static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
};
static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
.dev_id = "pxa2xx-spi.4",
.dev_id = "spi4",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),

View File

@ -207,7 +207,7 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
};
static struct gpiod_lookup_table littleton_spi_gpio_table = {
.dev_id = "pxa2xx-spi.2",
.dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },

View File

@ -994,7 +994,7 @@ static struct pxa2xx_spi_controller magician_spi_info = {
};
static struct gpiod_lookup_table magician_spi_gpio_table = {
.dev_id = "pxa2xx-spi.2",
.dev_id = "spi2",
.table = {
/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),

View File

@ -578,7 +578,7 @@ static struct pxa2xx_spi_controller spitz_spi_info = {
};
static struct gpiod_lookup_table spitz_spi_gpio_table = {
.dev_id = "pxa2xx-spi.2",
.dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),

View File

@ -623,7 +623,7 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
};
static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
.dev_id = "pxa2xx-spi.1",
.dev_id = "spi1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
@ -631,7 +631,7 @@ static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
};
static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
.dev_id = "pxa2xx-spi.2",
.dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },