From c6182ac96096f35c7216e4e6a3c64c7374dadeb7 Mon Sep 17 00:00:00 2001
From: George McCollister <george.mccollister@gmail.com>
Date: Thu, 9 Mar 2017 08:14:43 -0600
Subject: [PATCH] regulator: pfuze100-regulator: add coin support

Add support for PF0200 coin cell/super capacitor charger which works as
a current limited voltage source via the LICELL pin. When VIN goes below
a certain threshold LICELL is used to provide power for VSNVS which is
usually used to hold up secure non-volatile storage and the real-time
clock on the SoC.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../bindings/regulator/pfuze100.txt           |  8 ++++++-
 drivers/regulator/pfuze100-regulator.c        | 24 +++++++++++++++++++
 include/linux/regulator/pfuze100.h            |  1 +
 3 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 9b40db88f637..444c47831a40 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -13,7 +13,7 @@ Required child node:
   --PFUZE100
   sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
   --PFUZE200
-  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
+  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
   --PFUZE3000
   sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
 
@@ -205,6 +205,12 @@ Example 2: PFUZE200
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
+
+			coin_reg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 		};
 	};
 
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index cb18b5c4f2db..716abcc834c8 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -40,6 +40,7 @@
 #define PFUZE100_REVID		0x3
 #define PFUZE100_FABID		0x4
 
+#define PFUZE100_COINVOL	0x1a
 #define PFUZE100_SW1ABVOL	0x20
 #define PFUZE100_SW1CVOL	0x2e
 #define PFUZE100_SW2VOL		0x35
@@ -81,6 +82,10 @@ static const int pfuze100_vsnvs[] = {
 	1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
 };
 
+static const int pfuze100_coin[] = {
+	2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
+};
+
 static const int pfuze3000_sw2lo[] = {
 	1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000,
 };
@@ -230,6 +235,23 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
 		.stby_mask = 0x20,	\
 	}
 
+#define PFUZE100_COIN_REG(_chip, _name, base, mask, voltages)	\
+	[_chip ## _ ##  _name] = {	\
+		.desc = {	\
+			.name = #_name,	\
+			.n_voltages = ARRAY_SIZE(voltages),	\
+			.ops = &pfuze100_swb_regulator_ops,	\
+			.type = REGULATOR_VOLTAGE,	\
+			.id = _chip ## _ ## _name,	\
+			.owner = THIS_MODULE,	\
+			.volt_table = voltages,	\
+			.vsel_reg = (base),	\
+			.vsel_mask = (mask),	\
+			.enable_reg = (base),	\
+			.enable_mask = 0x8,	\
+		},	\
+	}
+
 #define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step)	{	\
 	.desc = {	\
 		.name = #_name,	\
@@ -317,6 +339,7 @@ static struct pfuze_regulator pfuze200_regulators[] = {
 	PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
 	PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
 	PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+	PFUZE100_COIN_REG(PFUZE200, COIN, PFUZE100_COINVOL, 0x7, pfuze100_coin),
 };
 
 static struct pfuze_regulator pfuze3000_regulators[] = {
@@ -371,6 +394,7 @@ static struct of_regulator_match pfuze200_matches[] = {
 	{ .name = "vgen4",	},
 	{ .name = "vgen5",	},
 	{ .name = "vgen6",	},
+	{ .name = "coin",	},
 };
 
 /* PFUZE3000 */
diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
index 70c6c66c5bcf..e0ccf46f66cf 100644
--- a/include/linux/regulator/pfuze100.h
+++ b/include/linux/regulator/pfuze100.h
@@ -48,6 +48,7 @@
 #define PFUZE200_VGEN4		10
 #define PFUZE200_VGEN5		11
 #define PFUZE200_VGEN6		12
+#define PFUZE200_COIN		13
 
 #define PFUZE3000_SW1A		0
 #define PFUZE3000_SW1B		1