net: bcmgenet: Determine PHY type before scanning MDIO bus

Our internal GPHY might be powered off before we attempt scanning the
MDIO bus and bind a driver to it. The way we are currently determining
whether a PHY is internal or not is done *after* we have successfully
matched its driver. If the PHY is powered down, it will not respond to
the MDIO bus, so we will not be able to bind a driver to it.

Our Device Tree for GENET interfaces specifies a "phy-mode" value:
"internal" which tells if this internal uses an internal PHY or not.

If of_get_phy_mode() fails to parse the 'phy-mode' property, do an
additional manual lookup, and if we find "internal" set the
corresponding internal variable accordingly.

Replace all uses of phy_is_internal() with a check against
priv->internal_phy to avoid having to rely on whether or not
priv->phydev is set correctly.

Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2015-07-16 15:51:17 -07:00 committed by David S. Miller
parent bd4060a610
commit c624f89121
3 changed files with 32 additions and 12 deletions

View file

@ -1724,7 +1724,7 @@ static int init_umac(struct bcmgenet_priv *priv)
int0_enable |= UMAC_IRQ_TXDMA_DONE;
/* Monitor cable plug/unplugged event for internal PHY */
if (phy_is_internal(priv->phydev)) {
if (priv->internal_phy) {
int0_enable |= UMAC_IRQ_LINK_EVENT;
} else if (priv->ext_phy) {
int0_enable |= UMAC_IRQ_LINK_EVENT;
@ -2631,7 +2631,7 @@ static int bcmgenet_open(struct net_device *dev)
/* If this is an internal GPHY, power it back on now, before UniMAC is
* brought out of reset as absolutely no UniMAC activity is allowed
*/
if (phy_is_internal(priv->phydev))
if (priv->internal_phy)
bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
/* take MAC out of reset */
@ -2650,7 +2650,7 @@ static int bcmgenet_open(struct net_device *dev)
bcmgenet_set_hw_addr(priv, dev->dev_addr);
if (phy_is_internal(priv->phydev)) {
if (priv->internal_phy) {
reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
reg |= EXT_ENERGY_DET_MASK;
bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
@ -2756,7 +2756,7 @@ static int bcmgenet_close(struct net_device *dev)
free_irq(priv->irq0, priv);
free_irq(priv->irq1, priv);
if (phy_is_internal(priv->phydev))
if (priv->internal_phy)
ret = bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
if (!IS_ERR(priv->clk))
@ -3318,7 +3318,7 @@ static int bcmgenet_suspend(struct device *d)
if (device_may_wakeup(d) && priv->wolopts) {
ret = bcmgenet_power_down(priv, GENET_POWER_WOL_MAGIC);
clk_prepare_enable(priv->clk_wol);
} else if (phy_is_internal(priv->phydev)) {
} else if (priv->internal_phy) {
ret = bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
}
@ -3347,7 +3347,7 @@ static int bcmgenet_resume(struct device *d)
/* If this is an internal GPHY, power it back on now, before UniMAC is
* brought out of reset as absolutely no UniMAC activity is allowed
*/
if (phy_is_internal(priv->phydev))
if (priv->internal_phy)
bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
bcmgenet_umac_reset(priv);
@ -3369,7 +3369,7 @@ static int bcmgenet_resume(struct device *d)
bcmgenet_set_hw_addr(priv, dev->dev_addr);
if (phy_is_internal(priv->phydev)) {
if (priv->internal_phy) {
reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
reg |= EXT_ENERGY_DET_MASK;
bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);

View file

@ -593,6 +593,7 @@ struct bcmgenet_priv {
/* MDIO bus variables */
wait_queue_head_t wq;
struct phy_device *phydev;
bool internal_phy;
struct device_node *phy_dn;
struct device_node *mdio_dn;
struct mii_bus *mii_bus;

View file

@ -227,10 +227,10 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
u32 port_ctrl;
u32 reg;
priv->ext_phy = !phy_is_internal(priv->phydev) &&
priv->ext_phy = !priv->internal_phy &&
(priv->phy_interface != PHY_INTERFACE_MODE_MOCA);
if (phy_is_internal(priv->phydev))
if (priv->internal_phy)
priv->phy_interface = PHY_INTERFACE_MODE_NA;
switch (priv->phy_interface) {
@ -248,7 +248,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL);
if (phy_is_internal(priv->phydev)) {
if (priv->internal_phy) {
phy_name = "internal PHY";
bcmgenet_internal_phy_setup(dev);
} else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
@ -386,7 +386,7 @@ static int bcmgenet_mii_probe(struct net_device *dev)
/* The internal PHY has its link interrupts routed to the
* Ethernet MAC ISRs
*/
if (phy_is_internal(priv->phydev))
if (priv->internal_phy)
priv->mii_bus->irq[phydev->addr] = PHY_IGNORE_INTERRUPT;
else
priv->mii_bus->irq[phydev->addr] = PHY_POLL;
@ -479,7 +479,9 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
{
struct device_node *dn = priv->pdev->dev.of_node;
struct device *kdev = &priv->pdev->dev;
const char *phy_mode_str = NULL;
char *compat;
int phy_mode;
int ret;
compat = kasprintf(GFP_KERNEL, "brcm,genet-mdio-v%d", priv->version);
@ -503,7 +505,24 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0);
/* Get the link mode */
priv->phy_interface = of_get_phy_mode(dn);
phy_mode = of_get_phy_mode(dn);
priv->phy_interface = phy_mode;
/* We need to specifically look up whether this PHY interface is internal
* or not *before* we even try to probe the PHY driver over MDIO as we
* may have shut down the internal PHY for power saving purposes.
*/
if (phy_mode < 0) {
ret = of_property_read_string(dn, "phy-mode", &phy_mode_str);
if (ret < 0) {
dev_err(kdev, "invalid PHY mode property\n");
return ret;
}
priv->phy_interface = PHY_INTERFACE_MODE_NA;
if (!strcasecmp(phy_mode_str, "internal"))
priv->internal_phy = true;
}
return 0;
}