mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-29 22:02:02 +00:00
dt-bindings: gpio: Add gpio-delay binding document
This adds bindings for a GPIO enable/disable delay driver. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This commit is contained in:
parent
1a55fc4012
commit
c7239a3da1
1 changed files with 79 additions and 0 deletions
79
Documentation/devicetree/bindings/gpio/gpio-delay.yaml
Normal file
79
Documentation/devicetree/bindings/gpio/gpio-delay.yaml
Normal file
|
@ -0,0 +1,79 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: GPIO delay controller
|
||||
|
||||
maintainers:
|
||||
- Alexander Stein <linux@ew.tq-group.com>
|
||||
|
||||
description: |
|
||||
This binding describes an electrical setup where setting an GPIO output
|
||||
is delayed by some external setup, e.g. RC curcuit.
|
||||
|
||||
+----------+ +-----------+
|
||||
| | VCC_B | |
|
||||
| | | | |
|
||||
| | VCC_A _ | |
|
||||
| GPIO | | | R | Consumer |
|
||||
|controller| ___ |_| | |
|
||||
| | | | | | |
|
||||
| [IOx|-------| |--+-----|-----+ |
|
||||
| | |___| | | input |
|
||||
| | | | |
|
||||
+----------+ --- C +-----------+
|
||||
---
|
||||
|
|
||||
-
|
||||
GND
|
||||
|
||||
If the input on the consumer is controlled by an open-drain signal
|
||||
attached to an RC curcuit the ramp-up delay is not under control
|
||||
of the GPIO controller.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: gpio-delay
|
||||
|
||||
"#gpio-cells":
|
||||
description: |
|
||||
Specifies the pin, ramp-up and ramp-down delays. The
|
||||
delays are specified in microseconds.
|
||||
const: 3
|
||||
|
||||
gpios:
|
||||
description: Array of GPIOs which output signal change is delayed
|
||||
minItems: 1
|
||||
maxItems: 32
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
gpio-line-names:
|
||||
minItems: 1
|
||||
maxItems: 32
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- "#gpio-cells"
|
||||
- gpio-controller
|
||||
- gpios
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
enable_delay: enable-delay {
|
||||
compatible = "gpio-delay";
|
||||
#gpio-cells = <3>;
|
||||
gpio-controller;
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>,
|
||||
<&gpio3 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
consumer {
|
||||
enable-gpios = <&enable_delay 0 130000 30000>;
|
||||
};
|
Loading…
Reference in a new issue