From 7dbbf0fa1bf14c17900bb8057986b06db3822239 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 22 Nov 2016 16:17:50 -0800 Subject: [PATCH 1/5] scsi: scsi-mq: Wait for .queue_rq() if necessary Ensure that if scsi-mq is enabled that scsi_internal_device_block() waits until ongoing shost->hostt->queuecommand() calls have finished. Signed-off-by: Bart Van Assche Reviewed-by: Sagi Grimberg Reviewed-by: Martin K. Petersen Cc: James Bottomley Cc: Christoph Hellwig Cc: Doug Ledford Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index c35b6de4ca64..9fd9a977c695 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -2893,7 +2893,7 @@ scsi_internal_device_block(struct scsi_device *sdev) * request queue. */ if (q->mq_ops) { - blk_mq_stop_hw_queues(q); + blk_mq_quiesce_queue(q); } else { spin_lock_irqsave(q->queue_lock, flags); blk_stop_queue(q); From 7961d53d22375bb9e8ae8063533b9059102ed39d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 20 Dec 2016 08:43:30 -0800 Subject: [PATCH 2/5] scsi: qedi: fix build, depends on UIO Fix build of SCSI qedi driver. It uses uio interfaces so it should depend on UIO. ERROR: "uio_unregister_device" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "uio_event_notify" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "__uio_register_device" [drivers/scsi/qedi/qedi.ko] undefined! Signed-off-by: Randy Dunlap Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qedi/Kconfig b/drivers/scsi/qedi/Kconfig index 23ca8a274586..21331453db7b 100644 --- a/drivers/scsi/qedi/Kconfig +++ b/drivers/scsi/qedi/Kconfig @@ -1,6 +1,6 @@ config QEDI tristate "QLogic QEDI 25/40/100Gb iSCSI Initiator Driver Support" - depends on PCI && SCSI + depends on PCI && SCSI && UIO depends on QED select SCSI_ISCSI_ATTRS select QED_LL2 From 9698b6f473555a722bf81a3371998427d5d27bde Mon Sep 17 00:00:00 2001 From: Satish Kharat Date: Wed, 14 Dec 2016 13:20:41 -0800 Subject: [PATCH 3/5] scsi: fnic: Avoid sending reset to firmware when another reset is in progress This fix is to avoid calling fnic_fw_reset_handler through fnic_host_reset when a finc reset is alreay in progress. Signed-off-by: Satish Kharat Signed-off-by: Sesidhar Baddela Signed-off-by: Martin K. Petersen --- drivers/scsi/fnic/fnic.h | 1 + drivers/scsi/fnic/fnic_scsi.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index 9ddc9200e0a4..9e4b7709043e 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -248,6 +248,7 @@ struct fnic { struct completion *remove_wait; /* device remove thread blocks */ atomic_t in_flight; /* io counter */ + bool internal_reset_inprogress; u32 _reserved; /* fill hole */ unsigned long state_flags; /* protected by host lock */ enum fnic_state state; diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index 2544a37ece0a..adb3d5871e74 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -2581,6 +2581,19 @@ int fnic_host_reset(struct scsi_cmnd *sc) unsigned long wait_host_tmo; struct Scsi_Host *shost = sc->device->host; struct fc_lport *lp = shost_priv(shost); + struct fnic *fnic = lport_priv(lp); + unsigned long flags; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->internal_reset_inprogress == 0) { + fnic->internal_reset_inprogress = 1; + } else { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "host reset in progress skipping another host reset\n"); + return SUCCESS; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); /* * If fnic_reset is successful, wait for fabric login to complete @@ -2601,6 +2614,9 @@ int fnic_host_reset(struct scsi_cmnd *sc) } } + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->internal_reset_inprogress = 0; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); return ret; } From 0371adcdaca92912baaa3256ed13e058a016e62d Mon Sep 17 00:00:00 2001 From: Burak Ok Date: Wed, 21 Dec 2016 14:45:53 +0100 Subject: [PATCH 4/5] scsi: snic: Return error code on memory allocation failure If a call to mempool_create_slab_pool() in snic_probe() returns NULL, return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails if it cannot allocate memory. https://bugzilla.kernel.org/show_bug.cgi?id=189061 Reported-by: bianpan2010@ruc.edu.cn Signed-off-by: Burak Ok Signed-off-by: Andreas Schaertl Acked-by: Narsimhulu Musini Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/snic/snic_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/snic/snic_main.c b/drivers/scsi/snic/snic_main.c index 396b32dca074..7cf70aaec0ba 100644 --- a/drivers/scsi/snic/snic_main.c +++ b/drivers/scsi/snic/snic_main.c @@ -591,6 +591,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pool) { SNIC_HOST_ERR(shost, "dflt sgl pool creation failed\n"); + ret = -ENOMEM; goto err_free_res; } @@ -601,6 +602,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pool) { SNIC_HOST_ERR(shost, "max sgl pool creation failed\n"); + ret = -ENOMEM; goto err_free_dflt_sgl_pool; } @@ -611,6 +613,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pool) { SNIC_HOST_ERR(shost, "snic tmreq info pool creation failed.\n"); + ret = -ENOMEM; goto err_free_max_sgl_pool; } From 2d1148f0f45079d25a0fa0d67e4fdb2a656d12fb Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Fri, 23 Dec 2016 20:40:19 -0800 Subject: [PATCH 5/5] scsi: bfa: Increase requested firmware version to 3.2.5.1 bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR Series Adapter Firmware"). bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in 3f307c3d70 ("bna: Update the Driver and Firmware Version") bfa was not updated. I presume this was an oversight but it broke support for bfa+bna cards such as the following 04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.2 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.3 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) Currently, if the bfa module is loaded first, bna fails to probe the respective devices with [ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1 [ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144 [ 215.060656] bna 0000:04:00.2: initialization failed err=1 [ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144 [ 215.090644] bna 0000:04:00.3: initialization failed err=1 Whereas if bna is loaded first, bfa fails with [ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version [ 249.833513] bfa 0000:04:00.0: bfa init failed [ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0 [ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version [ 250.045449] bfa 0000:04:00.1: bfa init failed [ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0 Increase bfa's requested firmware version. Also increase the driver version. I only tested that all of the devices probe without error. Reported-by: Tim Ehlers Signed-off-by: Benjamin Poirier Acked-by: Rasesh Mody Signed-off-by: Martin K. Petersen --- drivers/scsi/bfa/bfad.c | 6 +++--- drivers/scsi/bfa/bfad_drv.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 9d253cb83ee7..e70410beb83a 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -64,9 +64,9 @@ int max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS; u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size; u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2; -#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin" -#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin" -#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin" +#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin" +#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin" +#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin" static u32 *bfad_load_fwimg(struct pci_dev *pdev); static void bfad_free_fwimg(void); diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index f9e862093a25..cfcfff48e8e1 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -58,7 +58,7 @@ #ifdef BFA_DRIVER_VERSION #define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION #else -#define BFAD_DRIVER_VERSION "3.2.25.0" +#define BFAD_DRIVER_VERSION "3.2.25.1" #endif #define BFAD_PROTO_NAME FCPI_NAME