diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig index 3fe388b87c2e..af08c8609c63 100644 --- a/drivers/net/wireless/wl12xx/Kconfig +++ b/drivers/net/wireless/wl12xx/Kconfig @@ -42,16 +42,6 @@ config WL12XX_SDIO If you choose to build a module, it'll be called wl12xx_sdio. Say N if unsure. -config WL12XX_SDIO_TEST - tristate "TI wl12xx SDIO testing support" - depends on WL12XX && MMC && WL12XX_SDIO - default n - ---help--- - This module adds support for the SDIO bus testing with the - TI wl12xx chipsets. You probably don't want this unless you are - testing a new hardware platform. Select this if you want to test the - SDIO bus which is connected to the wl12xx chip. - config WL12XX_PLATFORM_DATA bool depends on WL12XX_SDIO != n || WL1251_SDIO != n diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile index 621b3483ca2c..fe67262ba19f 100644 --- a/drivers/net/wireless/wl12xx/Makefile +++ b/drivers/net/wireless/wl12xx/Makefile @@ -3,14 +3,11 @@ wl12xx-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \ wl12xx_spi-objs = spi.o wl12xx_sdio-objs = sdio.o -wl12xx_sdio_test-objs = sdio_test.o wl12xx-$(CONFIG_NL80211_TESTMODE) += testmode.o obj-$(CONFIG_WL12XX) += wl12xx.o obj-$(CONFIG_WL12XX_SPI) += wl12xx_spi.o obj-$(CONFIG_WL12XX_SDIO) += wl12xx_sdio.o -obj-$(CONFIG_WL12XX_SDIO_TEST) += wl12xx_sdio_test.o - # small builtin driver bit obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c deleted file mode 100644 index f25d5d9212e7..000000000000 --- a/drivers/net/wireless/wl12xx/sdio_test.c +++ /dev/null @@ -1,543 +0,0 @@ -/* - * SDIO testing driver for wl12xx - * - * Copyright (C) 2010 Nokia Corporation - * - * Contact: Roger Quadros - * - * wl12xx read/write routines taken from the main module - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "wl12xx.h" -#include "io.h" -#include "boot.h" - -#ifndef SDIO_VENDOR_ID_TI -#define SDIO_VENDOR_ID_TI 0x0097 -#endif - -#ifndef SDIO_DEVICE_ID_TI_WL1271 -#define SDIO_DEVICE_ID_TI_WL1271 0x4076 -#endif - -static bool rx, tx; - -module_param(rx, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(rx, "Perform rx test. Default (0). " - "This test continuously reads data from the SDIO device.\n"); - -module_param(tx, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(tx, "Perform tx test. Default (0). " - "This test continuously writes data to the SDIO device.\n"); - -struct wl1271_test { - struct wl1271 wl; - struct task_struct *test_task; -}; - -static const struct sdio_device_id wl1271_devices[] = { - { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, - {} -}; - -static inline struct sdio_func *wl_to_func(struct wl1271 *wl) -{ - return wl->if_priv; -} - -static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl) -{ - return &(wl_to_func(wl)->dev); -} - -static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - int ret = 0; - struct sdio_func *func = wl_to_func(wl); - - if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { - ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); - wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x", - addr, ((u8 *)buf)[0]); - } else { - if (fixed) - ret = sdio_readsb(func, buf, addr, len); - else - ret = sdio_memcpy_fromio(func, buf, addr, len); - - wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes", - addr, len); - wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); - } - - if (ret) - wl1271_error("sdio read failed (%d)", ret); -} - -static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - int ret = 0; - struct sdio_func *func = wl_to_func(wl); - - if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { - sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); - wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x", - addr, ((u8 *)buf)[0]); - } else { - wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes", - addr, len); - wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); - - if (fixed) - ret = sdio_writesb(func, addr, buf, len); - else - ret = sdio_memcpy_toio(func, addr, buf, len); - } - if (ret) - wl1271_error("sdio write failed (%d)", ret); - -} - -static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable) -{ - struct sdio_func *func = wl_to_func(wl); - int ret; - - /* Let the SDIO stack handle wlan_enable control, so we - * keep host claimed while wlan is in use to keep wl1271 - * alive. - */ - if (enable) { - /* Power up the card */ - ret = pm_runtime_get_sync(&func->dev); - if (ret < 0) - goto out; - - /* Runtime PM might be disabled, power up the card manually */ - ret = mmc_power_restore_host(func->card->host); - if (ret < 0) - goto out; - - sdio_claim_host(func); - sdio_enable_func(func); - } else { - sdio_disable_func(func); - sdio_release_host(func); - - /* Runtime PM might be disabled, power off the card manually */ - ret = mmc_power_save_host(func->card->host); - if (ret < 0) - goto out; - - /* Power down the card */ - ret = pm_runtime_put_sync(&func->dev); - } - -out: - return ret; -} - -static void wl1271_sdio_disable_interrupts(struct wl1271 *wl) -{ -} - -static void wl1271_sdio_enable_interrupts(struct wl1271 *wl) -{ -} - - -static struct wl1271_if_operations sdio_ops = { - .read = wl1271_sdio_raw_read, - .write = wl1271_sdio_raw_write, - .power = wl1271_sdio_set_power, - .dev = wl1271_sdio_wl_to_dev, - .enable_irq = wl1271_sdio_enable_interrupts, - .disable_irq = wl1271_sdio_disable_interrupts, -}; - -static void wl1271_fw_wakeup(struct wl1271 *wl) -{ - u32 elp_reg; - - elp_reg = ELPCTRL_WAKE_UP; - wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); -} - -static int wl1271_fetch_firmware(struct wl1271 *wl) -{ - const struct firmware *fw; - int ret; - - if (wl->chip.id == CHIP_ID_1283_PG20) - ret = request_firmware(&fw, WL128X_FW_NAME, - wl1271_wl_to_dev(wl)); - else - ret = request_firmware(&fw, WL127X_FW_NAME, - wl1271_wl_to_dev(wl)); - - if (ret < 0) { - wl1271_error("could not get firmware: %d", ret); - return ret; - } - - if (fw->size % 4) { - wl1271_error("firmware size is not multiple of 32 bits: %zu", - fw->size); - ret = -EILSEQ; - goto out; - } - - wl->fw_len = fw->size; - wl->fw = vmalloc(wl->fw_len); - - if (!wl->fw) { - wl1271_error("could not allocate memory for the firmware"); - ret = -ENOMEM; - goto out; - } - - memcpy(wl->fw, fw->data, wl->fw_len); - - ret = 0; - -out: - release_firmware(fw); - - return ret; -} - -static int wl1271_fetch_nvs(struct wl1271 *wl) -{ - const struct firmware *fw; - int ret; - - ret = request_firmware(&fw, WL12XX_NVS_NAME, wl1271_wl_to_dev(wl)); - - if (ret < 0) { - wl1271_error("could not get nvs file: %d", ret); - return ret; - } - - wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL); - - if (!wl->nvs) { - wl1271_error("could not allocate memory for the nvs file"); - ret = -ENOMEM; - goto out; - } - - wl->nvs_len = fw->size; - -out: - release_firmware(fw); - - return ret; -} - -static int wl1271_chip_wakeup(struct wl1271 *wl) -{ - struct wl1271_partition_set partition; - int ret; - - msleep(WL1271_PRE_POWER_ON_SLEEP); - ret = wl1271_power_on(wl); - if (ret) - return ret; - - msleep(WL1271_POWER_ON_SLEEP); - - /* We don't need a real memory partition here, because we only want - * to use the registers at this point. */ - memset(&partition, 0, sizeof(partition)); - partition.reg.start = REGISTERS_BASE; - partition.reg.size = REGISTERS_DOWN_SIZE; - wl1271_set_partition(wl, &partition); - - /* ELP module wake up */ - wl1271_fw_wakeup(wl); - - /* whal_FwCtrl_BootSm() */ - - /* 0. read chip id from CHIP_ID */ - wl->chip.id = wl1271_read32(wl, CHIP_ID_B); - - /* 1. check if chip id is valid */ - - switch (wl->chip.id) { - case CHIP_ID_1271_PG10: - wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", - wl->chip.id); - break; - case CHIP_ID_1271_PG20: - wl1271_notice("chip id 0x%x (1271 PG20)", - wl->chip.id); - break; - case CHIP_ID_1283_PG20: - wl1271_notice("chip id 0x%x (1283 PG20)", - wl->chip.id); - break; - case CHIP_ID_1283_PG10: - default: - wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); - return -ENODEV; - } - - return ret; -} - -static struct wl1271_partition_set part_down = { - .mem = { - .start = 0x00000000, - .size = 0x000177c0 - }, - .reg = { - .start = REGISTERS_BASE, - .size = 0x00008800 - }, - .mem2 = { - .start = 0x00000000, - .size = 0x00000000 - }, - .mem3 = { - .start = 0x00000000, - .size = 0x00000000 - }, -}; - -static int tester(void *data) -{ - struct wl1271 *wl = data; - struct sdio_func *func = wl_to_func(wl); - struct device *pdev = &func->dev; - int ret = 0; - bool rx_started = 0; - bool tx_started = 0; - uint8_t *tx_buf, *rx_buf; - int test_size = PAGE_SIZE; - u32 addr = 0; - struct wl1271_partition_set partition; - - /* We assume chip is powered up and firmware fetched */ - - memcpy(&partition, &part_down, sizeof(partition)); - partition.mem.start = addr; - wl1271_set_partition(wl, &partition); - - tx_buf = kmalloc(test_size, GFP_KERNEL); - rx_buf = kmalloc(test_size, GFP_KERNEL); - if (!tx_buf || !rx_buf) { - dev_err(pdev, - "Could not allocate memory. Test will not run.\n"); - ret = -ENOMEM; - goto free; - } - - memset(tx_buf, 0x5a, test_size); - - /* write something in data area so we can read it back */ - wl1271_write(wl, addr, tx_buf, test_size, false); - - while (!kthread_should_stop()) { - if (rx && !rx_started) { - dev_info(pdev, "starting rx test\n"); - rx_started = 1; - } else if (!rx && rx_started) { - dev_info(pdev, "stopping rx test\n"); - rx_started = 0; - } - - if (tx && !tx_started) { - dev_info(pdev, "starting tx test\n"); - tx_started = 1; - } else if (!tx && tx_started) { - dev_info(pdev, "stopping tx test\n"); - tx_started = 0; - } - - if (rx_started) - wl1271_read(wl, addr, rx_buf, test_size, false); - - if (tx_started) - wl1271_write(wl, addr, tx_buf, test_size, false); - - if (!rx_started && !tx_started) - msleep(100); - } - -free: - kfree(tx_buf); - kfree(rx_buf); - return ret; -} - -static int __devinit wl1271_probe(struct sdio_func *func, - const struct sdio_device_id *id) -{ - const struct wl12xx_platform_data *wlan_data; - struct wl1271 *wl; - struct wl1271_test *wl_test; - int ret = 0; - - /* wl1271 has 2 sdio functions we handle just the wlan part */ - if (func->num != 0x02) - return -ENODEV; - - wl_test = kzalloc(sizeof(struct wl1271_test), GFP_KERNEL); - if (!wl_test) { - dev_err(&func->dev, "Could not allocate memory\n"); - return -ENOMEM; - } - - wl = &wl_test->wl; - - wl->if_priv = func; - wl->if_ops = &sdio_ops; - - /* Grab access to FN0 for ELP reg. */ - func->card->quirks |= MMC_QUIRK_LENIENT_FN0; - - /* Use block mode for transferring over one block size of data */ - func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; - - wlan_data = wl12xx_get_platform_data(); - if (IS_ERR(wlan_data)) { - ret = PTR_ERR(wlan_data); - dev_err(&func->dev, "missing wlan platform data: %d\n", ret); - goto out_free; - } - - wl->irq = wlan_data->irq; - wl->ref_clock = wlan_data->board_ref_clock; - wl->tcxo_clock = wlan_data->board_tcxo_clock; - - sdio_set_drvdata(func, wl_test); - - /* power up the device */ - ret = wl1271_chip_wakeup(wl); - if (ret) { - dev_err(&func->dev, "could not wake up chip\n"); - goto out_free; - } - - if (wl->fw == NULL) { - ret = wl1271_fetch_firmware(wl); - if (ret < 0) { - dev_err(&func->dev, "firmware fetch error\n"); - goto out_off; - } - } - - /* fetch NVS */ - if (wl->nvs == NULL) { - ret = wl1271_fetch_nvs(wl); - if (ret < 0) { - dev_err(&func->dev, "NVS fetch error\n"); - goto out_off; - } - } - - ret = wl1271_load_firmware(wl); - if (ret < 0) { - dev_err(&func->dev, "firmware load error: %d\n", ret); - goto out_free; - } - - dev_info(&func->dev, "initialized\n"); - - /* I/O testing will be done in the tester thread */ - - wl_test->test_task = kthread_run(tester, wl, "sdio_tester"); - if (IS_ERR(wl_test->test_task)) { - dev_err(&func->dev, "unable to create kernel thread\n"); - ret = PTR_ERR(wl_test->test_task); - goto out_free; - } - - return 0; - -out_off: - /* power off the chip */ - wl1271_power_off(wl); - -out_free: - kfree(wl_test); - return ret; -} - -static void __devexit wl1271_remove(struct sdio_func *func) -{ - struct wl1271_test *wl_test = sdio_get_drvdata(func); - - /* stop the I/O test thread */ - kthread_stop(wl_test->test_task); - - /* power off the chip */ - wl1271_power_off(&wl_test->wl); - - vfree(wl_test->wl.fw); - wl_test->wl.fw = NULL; - kfree(wl_test->wl.nvs); - wl_test->wl.nvs = NULL; - - kfree(wl_test); -} - -static struct sdio_driver wl1271_sdio_driver = { - .name = "wl12xx_sdio_test", - .id_table = wl1271_devices, - .probe = wl1271_probe, - .remove = __devexit_p(wl1271_remove), -}; - -static int __init wl1271_init(void) -{ - int ret; - - ret = sdio_register_driver(&wl1271_sdio_driver); - if (ret < 0) - pr_err("failed to register sdio driver: %d\n", ret); - - return ret; -} -module_init(wl1271_init); - -static void __exit wl1271_exit(void) -{ - sdio_unregister_driver(&wl1271_sdio_driver); -} -module_exit(wl1271_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Roger Quadros "); -