mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-02 23:27:06 +00:00
Code Issues Releases Wiki Activity

net/ethernet: remove useless is_valid_ether_addr from drivers ndo_open

Browse source 
If ndo_validate_addr is set to the generic eth_validate_addr
function there is no point in calling is_valid_ether_addr
from driver ndo_open if ndo_open is not used elsewhere in
the driver.

With this change is_valid_ether_addr will be called from the
generic eth_validate_addr function. So there should be no change
in the actual behavior.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Joachim Eastwood 2012-11-16 04:47:15 +00:00 committed by David S. Miller
parent ae4b46e9d7
commit c867b55eb4
13 changed files with 1 additions and 62 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
drivers/net/ethernet/8390/etherh.c
View file

@ -463,12 +463,6 @@ etherh_open(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
dev->name);
return -EINVAL;
}
if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev))
return -EAGAIN;

3
drivers/net/ethernet/cadence/at91_ether.c
View file

@ -97,9 +97,6 @@ static int at91ether_open(struct net_device *dev)
u32 ctl;
int ret;
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
/* Clear internal statistics */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));

3
drivers/net/ethernet/cadence/macb.c
View file

@ -1215,9 +1215,6 @@ static int macb_open(struct net_device *dev)
if (!bp->phy_dev)
return -EAGAIN;
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
err = macb_alloc_consistent(bp);
if (err) {
netdev_err(dev, "Unable to allocate DMA memory (error %d)\n",

3
drivers/net/ethernet/dnet.c
View file

@ -664,9 +664,6 @@ static int dnet_open(struct net_device *dev)
if (!bp->phy_dev)
return -EAGAIN;
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
napi_enable(&bp->napi);
dnet_init_hw(bp);

6
drivers/net/ethernet/i825xx/ether1.c
View file

@ -638,12 +638,6 @@ ether1_txalloc (struct net_device *dev, int size)
static int
ether1_open (struct net_device *dev)
{
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
dev->name);
return -EINVAL;
}
if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev))
return -EAGAIN;

3
drivers/net/ethernet/micrel/ks8695net.c
View file

@ -1249,9 +1249,6 @@ ks8695_open(struct net_device *ndev)
struct ks8695_priv *ksp = netdev_priv(ndev);
int ret;
if (!is_valid_ether_addr(ndev->dev_addr))
return -EADDRNOTAVAIL;
ks8695_reset(ksp);
ks8695_update_mac(ksp);

4
drivers/net/ethernet/nxp/lpc_eth.c
View file

@ -1219,9 +1219,6 @@ static int lpc_eth_open(struct net_device *ndev)
if (netif_msg_ifup(pldat))
dev_dbg(&pldat->pdev->dev, "enabling %s\n", ndev->name);
if (!is_valid_ether_addr(ndev->dev_addr))
return -EADDRNOTAVAIL;
__lpc_eth_clock_enable(pldat, true);
/* Reset and initialize */
@ -1301,6 +1298,7 @@ static const struct net_device_ops lpc_netdev_ops = {
.ndo_set_rx_mode = lpc_eth_set_multicast_list,
.ndo_do_ioctl = lpc_eth_ioctl,
.ndo_set_mac_address = lpc_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
};

6
drivers/net/ethernet/seeq/ether3.c
View file

@ -399,12 +399,6 @@ ether3_probe_bus_16(struct net_device *dev, int val)
static int
ether3_open(struct net_device *dev)
{
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
dev->name);
return -EINVAL;
}
if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev))
return -EAGAIN;

10
drivers/net/ethernet/smsc/smc911x.c
View file

@ -1400,16 +1400,6 @@ smc911x_open(struct net_device *dev)
DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
/*
* Check that the address is valid. If its not, refuse
* to bring the device up. The user must specify an
* address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
*/
if (!is_valid_ether_addr(dev->dev_addr)) {
PRINTK("%s: no valid ethernet hw addr\n", __func__);
return -EINVAL;
}
/* reset the hardware */
smc911x_reset(dev);

10
drivers/net/ethernet/smsc/smc91x.c
View file

@ -1474,16 +1474,6 @@ smc_open(struct net_device *dev)
DBG(2, "%s: %s\n", dev->name, __func__);
/*
* Check that the address is valid. If its not, refuse
* to bring the device up. The user must specify an
* address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
*/
if (!is_valid_ether_addr(dev->dev_addr)) {
PRINTK("%s: no valid ethernet hw addr\n", __func__);
return -EINVAL;
}
/* Setup the default Register Modes */
lp->tcr_cur_mode = TCR_DEFAULT;
lp->rcr_cur_mode = RCR_DEFAULT;

5
drivers/net/ethernet/smsc/smsc911x.c
View file

@ -1463,11 +1463,6 @@ static int smsc911x_open(struct net_device *dev)
return -EAGAIN;
}
if (!is_valid_ether_addr(dev->dev_addr)) {
SMSC_WARN(pdata, hw, "dev_addr is not a valid MAC address");
return -EADDRNOTAVAIL;
}
/* Reset the LAN911x */
if (smsc911x_soft_reset(pdata)) {
SMSC_WARN(pdata, hw, "soft reset failed");

2
drivers/net/ethernet/wiznet/w5100.c
View file

@ -580,8 +580,6 @@ static int w5100_open(struct net_device *ndev)
struct w5100_priv *priv = netdev_priv(ndev);
netif_info(priv, ifup, ndev, "enabling\n");
if (!is_valid_ether_addr(ndev->dev_addr))
return -EINVAL;
w5100_hw_start(priv);
napi_enable(&priv->napi);
netif_start_queue(ndev);

2
drivers/net/ethernet/wiznet/w5300.c
View file

@ -500,8 +500,6 @@ static int w5300_open(struct net_device *ndev)
struct w5300_priv *priv = netdev_priv(ndev);
netif_info(priv, ifup, ndev, "enabling\n");
if (!is_valid_ether_addr(ndev->dev_addr))
return -EINVAL;
w5300_hw_start(priv);
napi_enable(&priv->napi);
netif_start_queue(ndev);