mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-27 22:51:31 +00:00
Code Issues Releases Wiki Activity

ARM: PL08x: combine functions to start DMA into one function

Browse source 
There is no need for pl08x_config_phychan_for_txd(), pl08x_set_cregs()
and pl08x_enable_phy_chan() to be separate - they are always called in
sequence.  Combine them into one function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This commit is contained in:
Russell King - ARM Linux 2011-01-03 22:38:52 +00:00 committed by Dan Williams
parent db9f136a60
commit c885bee4f1
1 changed files with 40 additions and 62 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

102
drivers/dma/amba-pl08x.c
View file

@ -185,37 +185,17 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
/*
* Set the initial DMA register values i.e. those for the first LLI
* The next LLI pointer and the configuration interrupt bit have
* been set when the LLIs were constructed
* been set when the LLIs were constructed. Poke them into the hardware
* and start the transfer.
*/
static void pl08x_set_cregs(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *ch)
static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
struct pl08x_txd *txd)
{
/* Wait for channel inactive */
while (pl08x_phy_channel_busy(ch))
cpu_relax();
dev_vdbg(&pl08x->adev->dev,
"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
"cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n",
ch->id,
ch->csrc,
ch->cdst,
ch->cctl,
ch->clli,
ch->ccfg);
writel(ch->csrc, ch->base + PL080_CH_SRC_ADDR);
writel(ch->cdst, ch->base + PL080_CH_DST_ADDR);
writel(ch->clli, ch->base + PL080_CH_LLI);
writel(ch->cctl, ch->base + PL080_CH_CONTROL);
writel(ch->ccfg, ch->base + PL080_CH_CONFIG);
}
static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan)
{
struct pl08x_channel_data *cd = plchan->cd;
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_phy_chan *phychan = plchan->phychan;
struct pl08x_txd *txd = plchan->at;
u32 val;
plchan->at = txd;
/* Copy the basic control register calculated at transfer config */
phychan->csrc = txd->csrc;
@ -224,7 +204,7 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan)
phychan->cctl = txd->cctl;
/* Assign the signal to the proper control registers */
phychan->ccfg = cd->ccfg;
phychan->ccfg = plchan->cd->ccfg;
phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK;
phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK;
/* If it wasn't set from AMBA, ignore it */
@ -240,32 +220,38 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan)
phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK;
/* Always enable terminal interrupts */
phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK;
}
/*
* Enable the DMA channel
* Assumes all other configuration bits have been set
* as desired before this code is called
*/
static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *ch)
{
u32 val;
/*
* Do not access config register until channel shows as disabled
*/
while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id))
/* Wait for channel inactive */
while (pl08x_phy_channel_busy(phychan))
cpu_relax();
/*
* Do not access config register until channel shows as inactive
*/
val = readl(ch->base + PL080_CH_CONFIG);
while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
val = readl(ch->base + PL080_CH_CONFIG);
dev_vdbg(&pl08x->adev->dev,
"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
"cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n",
phychan->id,
phychan->csrc,
phychan->cdst,
phychan->cctl,
phychan->clli,
phychan->ccfg);
writel(val | PL080_CONFIG_ENABLE, ch->base + PL080_CH_CONFIG);
writel(phychan->csrc, phychan->base + PL080_CH_SRC_ADDR);
writel(phychan->cdst, phychan->base + PL080_CH_DST_ADDR);
writel(phychan->clli, phychan->base + PL080_CH_LLI);
writel(phychan->cctl, phychan->base + PL080_CH_CONTROL);
writel(phychan->ccfg, phychan->base + PL080_CH_CONFIG);
/* Enable the DMA channel */
/* Do not access config register until channel shows as disabled */
while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
cpu_relax();
/* Do not access config register until channel shows as inactive */
val = readl(phychan->base + PL080_CH_CONFIG);
while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
val = readl(phychan->base + PL080_CH_CONFIG);
writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG);
}
/*
@ -1278,7 +1264,6 @@ static void dma_set_runtime_config(struct dma_chan *chan,
static void pl08x_issue_pending(struct dma_chan *chan)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
unsigned long flags;
spin_lock_irqsave(&plchan->lock, flags);
@ -1296,13 +1281,9 @@ static void pl08x_issue_pending(struct dma_chan *chan)
struct pl08x_txd,
node);
list_del(&next->node);
plchan->at = next;
plchan->state = PL08X_CHAN_RUNNING;
/* Configure the physical channel for the active txd */
pl08x_config_phychan_for_txd(plchan);
pl08x_set_cregs(pl08x, plchan->phychan);
pl08x_enable_phy_chan(pl08x, plchan->phychan);
pl08x_start_txd(plchan, next);
}
spin_unlock_irqrestore(&plchan->lock, flags);
@ -1630,11 +1611,8 @@ static void pl08x_tasklet(unsigned long data)
struct pl08x_txd,
node);
list_del(&next->node);
plchan->at = next;
/* Configure the physical channel for the next txd */
pl08x_config_phychan_for_txd(plchan);
pl08x_set_cregs(pl08x, plchan->phychan);
pl08x_enable_phy_chan(pl08x, plchan->phychan);
pl08x_start_txd(plchan, next);
} else {
struct pl08x_dma_chan *waiting = NULL;