samples: pktgen: new append mode

To configure various complex flows we for sure can create custom
pktgen init scripts, but sometimes thats not that easy.

New "-a" (append) option in all the existing sample scripts allows
to append more "devices" into pktgen threads.

The most straightforward usecases for that are:
- using multiple devices. We have to generate full linerate on
all physical functions (ports) of our multiport device.
- pushing multiple flows (with different packet options)

Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

samples/pktgen/README.rst

@@ -28,11 +28,28 @@ across the sample scripts.  Usage example is printed on errors::
   -b : ($BURST)     HW level bursting of SKBs
   -v : ($VERBOSE)   verbose
   -x : ($DEBUG)     debug
+  -6 : ($IP6)       IPv6
   -w : ($DELAY)     Tx Delay value (ns)
+  -a : ($APPEND)    Script will not reset generator's state, but will append its config
 
 The global variable being set is also listed.  E.g. the required
 interface/device parameter "-i" sets variable $DEV.
 
+"-a" parameter may be used to create different flows simultaneously.
+In this mode script will keep the existing config, will append its settings.
+In this mode you'll have to manually run traffic with "pg_ctrl start".
+
+For example you may use:
+
+    source ./samples/pktgen/functions.sh
+    pg_ctrl reset
+    # add first device
+    ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f0 -m 34:80:0d:a3:fc:c9 -t 8
+    # add second device
+    ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f1 -m 34:80:0d:a3:fc:c9 -t 8
+    # run joint traffic on two devs
+    pg_ctrl start
+
 Common functions
 ----------------
 The functions.sh file provides; Three different shell functions for

samples/pktgen/functions.sh

@@ -108,7 +108,12 @@ function pgset() {
     fi
 }
 
-[[ $EUID -eq 0 ]] && trap 'pg_ctrl "reset"' EXIT
+if [[ -z "$APPEND" ]]; then
+	if [[ $EUID -eq 0 ]]; then
+		# Cleanup pktgen setup on exit if thats not "append mode"
+		trap 'pg_ctrl "reset"' EXIT
+	fi
+fi
 
 ## -- General shell tricks --
 

samples/pktgen/parameters.sh

@@ -20,12 +20,13 @@ function usage() {
     echo "  -x : (\$DEBUG)     debug"
     echo "  -6 : (\$IP6)       IPv6"
     echo "  -w : (\$DELAY)     Tx Delay value (ns)"
+    echo "  -a : (\$APPEND)    Script will not reset generator's state, but will append its config"
     echo ""
 }
 
 ##  --- Parse command line arguments / parameters ---
 ## echo "Commandline options:"
-while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6" option; do
+while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6a" option; do
     case $option in
         i) # interface
           export DEV=$OPTARG
@@ -83,6 +84,10 @@ while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6" option; do
 	  export IP6=6
 	  info "IP6: IP6=$IP6"
 	  ;;
+        a)
+          export APPEND=yes
+          info "Append mode: APPEND=$APPEND"
+          ;;
         h|?|*)
           usage;
           err 2 "[ERROR] Unknown parameters!!!"

samples/pktgen/pktgen_sample01_simple.sh

@@ -37,11 +37,11 @@ UDP_SRC_MAX=109
 
 # General cleanup everything since last run
 # (especially important if other threads were configured by other scripts)
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Add remove all other devices and add_device $DEV to thread 0
 thread=0
-pg_thread $thread "rem_device_all"
+[ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
 pg_thread $thread "add_device" $DEV
 
 # How many packets to send (zero means indefinitely)
@@ -77,11 +77,15 @@ pg_set $DEV "flag UDPSRC_RND"
 pg_set $DEV "udp_src_min $UDP_SRC_MIN"
 pg_set $DEV "udp_src_max $UDP_SRC_MAX"
 
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+    # start_run
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
 
-# Print results
-echo "Result device: $DEV"
-cat /proc/net/pktgen/$DEV
+    # Print results
+    echo "Result device: $DEV"
+    cat /proc/net/pktgen/$DEV
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi

samples/pktgen/pktgen_sample02_multiqueue.sh

@@ -38,7 +38,7 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
@@ -47,7 +47,7 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Notice config queue to map to cpu (mirrors smp_processor_id())
@@ -81,14 +81,18 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "udp_src_max $UDP_SRC_MAX"
 done
 
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+    # start_run
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
 
-# Print results
-for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
-    dev=${DEV}@${thread}
-    echo "Device: $dev"
-    cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+    # Print results
+    for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
+        dev=${DEV}@${thread}
+        echo "Device: $dev"
+        cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+    done
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi

samples/pktgen/pktgen_sample03_burst_single_flow.sh

@@ -43,14 +43,14 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -94,5 +94,9 @@ function control_c() {
 # trap keyboard interrupt (Ctrl-C)
 trap control_c SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi

samples/pktgen/pktgen_sample04_many_flows.sh

@@ -42,14 +42,14 @@ fi
 read -r SRC_MIN SRC_MAX <<< $(parse_addr 198.18.0.0/15)
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -104,7 +104,11 @@ function print_result() {
 # trap keyboard interrupt (Ctrl-C)
 trap true SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
 
-print_result
+    print_result
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi

samples/pktgen/pktgen_sample05_flow_per_thread.sh

@@ -32,14 +32,14 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -88,7 +88,11 @@ function print_result() {
 # trap keyboard interrupt (Ctrl-C)
 trap true SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
 
-print_result
+    print_result
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi

samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh

@@ -44,7 +44,7 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((i = 0; i < $THREADS; i++)); do
@@ -58,7 +58,7 @@ for ((i = 0; i < $THREADS; i++)); do
     info "irq ${irq_array[$i]} is set affinity to `cat /proc/irq/${irq_array[$i]}/smp_affinity_list`"
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # select queue and bind the queue and $dev in 1:1 relationship
@@ -99,14 +99,18 @@ for ((i = 0; i < $THREADS; i++)); do
 done
 
 # start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
 
-# Print results
-for ((i = 0; i < $THREADS; i++)); do
-    thread=${cpu_array[$((i+F_THREAD))]}
-    dev=${DEV}@${thread}
-    echo "Device: $dev"
-    cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+    # Print results
+    for ((i = 0; i < $THREADS; i++)); do
+        thread=${cpu_array[$((i+F_THREAD))]}
+        dev=${DEV}@${thread}
+        echo "Device: $dev"
+        cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+    done
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi