ARM: OMAP: Clear GPMC bits when applying new setting.

When setting the GPMC device type, make sure any previous
bits are cleared down, before applying the new setting.

For OMAP4+ devices MUXADDDATA is a 2-bit field (bits 9:8)
where as for OMAP2/3 devices it was only a one bit field
(bit 9). For OMAP2/3 devices bit 8 is reserved and the
OMAP documentation says to write a 0 to this bit. So
clearing bit 8 on OMAP2/3 devices should not be a problem.
Hence update the code to handle both bits 8 and 9 for all
devices.

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
[jon-hunter@ti.com: updated changelog]
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
This commit is contained in:
Mark Jackson 2013-03-05 10:13:40 +00:00 committed by Jon Hunter
parent dca3a78340
commit c9fb809424
2 changed files with 8 additions and 1 deletions

View file

@ -613,6 +613,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
case GPMC_CONFIG_DEV_TYPE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
/* clear 4 target bits */
regval &= ~(GPMC_CONFIG1_DEVICETYPE(3) |
GPMC_CONFIG1_MUXTYPE(3));
/* set the proper value */
regval |= GPMC_CONFIG1_DEVICETYPE(wval);
if (wval == GPMC_DEVICETYPE_NOR)
regval |= GPMC_CONFIG1_MUXADDDATA;

View file

@ -58,7 +58,10 @@
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
#define GPMC_CONFIG1_MUXNONMUX GPMC_CONFIG1_MUXTYPE(0)
#define GPMC_CONFIG1_MUXAAD GPMC_CONFIG1_MUXTYPE(1)
#define GPMC_CONFIG1_MUXADDDATA GPMC_CONFIG1_MUXTYPE(2)
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))