[PATCH] pciehp: remove redundant data structures

State information is currently stored in per-slot as well as
per-pci-function data structures in pciehp. There's a lot of
overlap in the information kept, and some of it is never used.
This patch consolidates the state information to per-slot and
eliminates unused data structures. The biggest change is to
eliminate the pci_func structure and the code around managing
its lists.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
rajesh.shah@intel.com 2005-10-31 16:20:08 -08:00 committed by Greg Kroah-Hartman
parent a8a2be9492
commit ca22a5e4d7
4 changed files with 65 additions and 734 deletions

View file

@ -56,25 +56,11 @@ struct hotplug_params {
u8 enable_perr;
};
struct pci_func {
struct pci_func *next;
u8 bus;
u8 device;
u8 function;
u8 is_a_board;
u16 status;
u8 configured;
u8 switch_save;
u8 presence_save;
u16 reserved2;
u32 config_space[0x20];
struct pci_dev* pci_dev;
};
struct slot {
struct slot *next;
u8 bus;
u8 device;
u16 status;
u32 number;
u8 is_a_board;
u8 configured;
@ -177,9 +163,6 @@ struct controller {
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
#define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n"
#define msg_HPC_non_pcie "The PCI hot plug controller is not supported by this driver.\n"
#define msg_HPC_not_supported "This system is not supported by this version of pciephd module. Upgrade to a newer version of pciehpd\n"
#define msg_button_on "PCI slot #%d - powering on due to button press.\n"
#define msg_button_off "PCI slot #%d - powering off due to button press.\n"
#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
@ -188,8 +171,6 @@ struct controller {
/* controller functions */
extern int pciehp_event_start_thread (void);
extern void pciehp_event_stop_thread (void);
extern struct pci_func *pciehp_slot_create (unsigned char busnumber);
extern struct pci_func *pciehp_slot_find (unsigned char bus, unsigned char device, unsigned char index);
extern int pciehp_enable_slot (struct slot *slot);
extern int pciehp_disable_slot (struct slot *slot);
@ -200,12 +181,8 @@ extern u8 pciehp_handle_power_fault (u8 hp_slot, void *inst_id);
/* extern void long_delay (int delay); */
/* pci functions */
extern int pciehp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
/*extern int pciehp_get_bus_dev (struct controller *ctrl, u8 *bus_num, u8 *dev_num, struct slot *slot);*/
extern int pciehp_save_config (struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
extern int pciehp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot);
extern int pciehp_configure_device (struct slot *ctrl);
extern int pciehp_unconfigure_device (struct pci_func* func);
extern int pciehp_configure_device (struct slot *p_slot);
extern int pciehp_unconfigure_device (struct slot *p_slot);
extern int get_hp_hw_control_from_firmware(struct pci_dev *dev);
extern void get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp);
@ -214,7 +191,6 @@ extern void get_hp_params_from_firmware(struct pci_dev *dev,
/* Global variables */
extern struct controller *pciehp_ctrl_list;
extern struct pci_func *pciehp_slot_list[256];
/* Inline functions */

View file

@ -46,7 +46,6 @@ int pciehp_debug;
int pciehp_poll_mode;
int pciehp_poll_time;
struct controller *pciehp_ctrl_list;
struct pci_func *pciehp_slot_list[256];
#define DRIVER_VERSION "0.4"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
@ -422,15 +421,6 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
first_device_num = ctrl->slot_device_offset;
num_ctlr_slots = ctrl->num_slots;
/* Store PCI Config Space for all devices on this bus */
dbg("%s: Before calling pciehp_save_config, ctrl->bus %x,ctrl->slot_bus %x\n",
__FUNCTION__,ctrl->bus, ctrl->slot_bus);
rc = pciehp_save_config(ctrl, ctrl->slot_bus, num_ctlr_slots, first_device_num);
if (rc) {
err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc);
goto err_out_free_ctrl_bus;
}
ctrl->add_support = 1;
/* Setup the slot information structures */
@ -491,7 +481,6 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
static int pcie_start_thread(void)
{
int loop;
int retval = 0;
dbg("Initialize + Start the notification/polling mechanism \n");
@ -502,20 +491,11 @@ static int pcie_start_thread(void)
return retval;
}
dbg("Initialize slot lists\n");
/* One slot list for each bus in the system */
for (loop = 0; loop < 256; loop++) {
pciehp_slot_list[loop] = NULL;
}
return retval;
}
static void __exit unload_pciehpd(void)
{
struct pci_func *next;
struct pci_func *TempSlot;
int loop;
struct controller *ctrl;
struct controller *tctrl;
@ -534,15 +514,6 @@ static void __exit unload_pciehpd(void)
kfree(tctrl);
}
for (loop = 0; loop < 256; loop++) {
next = pciehp_slot_list[loop];
while (next != NULL) {
TempSlot = next;
next = next->next;
kfree(TempSlot);
}
}
/* Stop the notification mechanism */
pciehp_event_stop_thread();

View file

@ -55,19 +55,16 @@ u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id)
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
struct pci_func *func;
struct event_info *taskInfo;
/* Attention Button Change */
dbg("pciehp: Attention button interrupt received.\n");
func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
/* This is the structure that tells the worker thread what to do */
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
ctrl->next_event = (ctrl->next_event + 1) % 10;
@ -112,14 +109,11 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id)
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
struct pci_func *func;
struct event_info *taskInfo;
/* Switch Change */
dbg("pciehp: Switch interrupt received.\n");
func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
/* This is the structure that tells the worker thread
* what to do
*/
@ -129,7 +123,7 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id)
rc++;
p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (getstatus) {
@ -137,14 +131,14 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id)
* Switch opened
*/
info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
func->switch_save = 0;
p_slot->switch_save = 0;
taskInfo->event_type = INT_SWITCH_OPEN;
} else {
/*
* Switch closed
*/
info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
func->switch_save = 0x10;
p_slot->switch_save = 0x10;
taskInfo->event_type = INT_SWITCH_CLOSE;
}
@ -159,14 +153,11 @@ u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id)
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
struct pci_func *func;
struct event_info *taskInfo;
/* Presence Change */
dbg("pciehp: Presence/Notify input change.\n");
func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
/* This is the structure that tells the worker thread
* what to do
*/
@ -180,8 +171,8 @@ u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id)
/* Switch is open, assume a presence change
* Save the presence state
*/
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
if (func->presence_save) {
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
if (p_slot->presence_save) {
/*
* Card Present
*/
@ -206,14 +197,11 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
struct pci_func *func;
struct event_info *taskInfo;
/* power fault */
dbg("pciehp: Power fault interrupt received.\n");
func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
/* this is the structure that tells the worker thread
* what to do
*/
@ -229,7 +217,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
* power fault Cleared
*/
info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
func->status = 0x00;
p_slot->status = 0x00;
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
@ -238,7 +226,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_POWER_FAULT;
/* set power fault status for this board */
func->status = 0xFF;
p_slot->status = 0xFF;
info("power fault bit %x set\n", hp_slot);
}
if (rc)
@ -247,187 +235,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
return rc;
}
/**
* pciehp_slot_create - Creates a node and adds it to the proper bus.
* @busnumber - bus where new node is to be located
*
* Returns pointer to the new node or NULL if unsuccessful
*/
struct pci_func *pciehp_slot_create(u8 busnumber)
{
struct pci_func *new_slot;
struct pci_func *next;
dbg("%s: busnumber %x\n", __FUNCTION__, busnumber);
new_slot = kmalloc(sizeof(struct pci_func), GFP_KERNEL);
if (new_slot == NULL)
return new_slot;
memset(new_slot, 0, sizeof(struct pci_func));
new_slot->next = NULL;
new_slot->configured = 1;
if (pciehp_slot_list[busnumber] == NULL) {
pciehp_slot_list[busnumber] = new_slot;
} else {
next = pciehp_slot_list[busnumber];
while (next->next != NULL)
next = next->next;
next->next = new_slot;
}
return new_slot;
}
/**
* slot_remove - Removes a node from the linked list of slots.
* @old_slot: slot to remove
*
* Returns 0 if successful, !0 otherwise.
*/
static int slot_remove(struct pci_func * old_slot)
{
struct pci_func *next;
if (old_slot == NULL)
return 1;
next = pciehp_slot_list[old_slot->bus];
if (next == NULL)
return 1;
if (next == old_slot) {
pciehp_slot_list[old_slot->bus] = old_slot->next;
kfree(old_slot);
return 0;
}
while ((next->next != old_slot) && (next->next != NULL)) {
next = next->next;
}
if (next->next == old_slot) {
next->next = old_slot->next;
kfree(old_slot);
return 0;
} else
return 2;
}
/**
* bridge_slot_remove - Removes a node from the linked list of slots.
* @bridge: bridge to remove
*
* Returns 0 if successful, !0 otherwise.
*/
static int bridge_slot_remove(struct pci_func *bridge)
{
u8 subordinateBus, secondaryBus;
u8 tempBus;
struct pci_func *next;
if (bridge == NULL)
return 1;
secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
next = pciehp_slot_list[tempBus];
while (!slot_remove(next)) {
next = pciehp_slot_list[tempBus];
}
}
next = pciehp_slot_list[bridge->bus];
if (next == NULL) {
return 1;
}
if (next == bridge) {
pciehp_slot_list[bridge->bus] = bridge->next;
kfree(bridge);
return 0;
}
while ((next->next != bridge) && (next->next != NULL)) {
next = next->next;
}
if (next->next == bridge) {
next->next = bridge->next;
kfree(bridge);
return 0;
} else
return 2;
}
/**
* pciehp_slot_find - Looks for a node by bus, and device, multiple functions accessed
* @bus: bus to find
* @device: device to find
* @index: is 0 for first function found, 1 for the second...
*
* Returns pointer to the node if successful, %NULL otherwise.
*/
struct pci_func *pciehp_slot_find(u8 bus, u8 device, u8 index)
{
int found = -1;
struct pci_func *func;
func = pciehp_slot_list[bus];
dbg("%s: bus %x device %x index %x\n",
__FUNCTION__, bus, device, index);
if (func != NULL) {
dbg("%s: func-> bus %x device %x function %x pci_dev %p\n",
__FUNCTION__, func->bus, func->device, func->function,
func->pci_dev);
} else
dbg("%s: func == NULL\n", __FUNCTION__);
if ((func == NULL) || ((func->device == device) && (index == 0)))
return func;
if (func->device == device)
found++;
while (func->next != NULL) {
func = func->next;
dbg("%s: In while loop, func-> bus %x device %x function %x pci_dev %p\n",
__FUNCTION__, func->bus, func->device, func->function,
func->pci_dev);
if (func->device == device)
found++;
dbg("%s: while loop, found %d, index %d\n", __FUNCTION__,
found, index);
if ((found == index) || (func->function == index)) {
dbg("%s: Found bus %x dev %x func %x\n", __FUNCTION__,
func->bus, func->device, func->function);
return func;
}
}
return NULL;
}
static int is_bridge(struct pci_func * func)
{
/* Check the header type */
if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
return 1;
else
return 0;
}
/* The following routines constitute the bulk of the
hotplug controller logic
*/
@ -472,17 +279,16 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot)
* Configures board
*
*/
static u32 board_added(struct pci_func * func, struct controller * ctrl)
static u32 board_added(struct slot *p_slot)
{
u8 hp_slot;
u32 temp_register = 0xFFFFFFFF;
u32 rc = 0;
struct slot *p_slot;
struct controller *ctrl = p_slot->ctrl;
p_slot = pciehp_find_slot(ctrl, func->device);
hp_slot = func->device - ctrl->slot_device_offset;
hp_slot = p_slot->device - ctrl->slot_device_offset;
dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, p_slot->device, ctrl->slot_device_offset, hp_slot);
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
@ -522,15 +328,15 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
return rc;
}
dbg("%s: func status = %x\n", __FUNCTION__, func->status);
dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
/* Check for a power fault */
if (func->status == 0xFF) {
if (p_slot->status == 0xFF) {
/* power fault occurred, but it was benign */
temp_register = 0xFFFFFFFF;
dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
rc = POWER_FAILURE;
func->status = 0;
p_slot->status = 0;
goto err_exit;
}
@ -541,10 +347,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
goto err_exit;
}
pciehp_save_slot_config(ctrl, func);
func->status = 0;
func->switch_save = 0x10;
func->is_a_board = 0x01;
p_slot->status = 0;
p_slot->switch_save = 0x10;
p_slot->is_a_board = 0x01;
/*
* Some PCI Express root ports require fixup after hot-plug operation.
@ -575,30 +380,27 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
* remove_board - Turns off slot and LED's
*
*/
static u32 remove_board(struct pci_func *func, struct controller *ctrl)
static u32 remove_board(struct slot *p_slot)
{
u8 device;
u8 hp_slot;
u32 rc;
struct slot *p_slot;
struct controller *ctrl = p_slot->ctrl;
if (func == NULL)
if (pciehp_unconfigure_device(p_slot))
return 1;
if (pciehp_unconfigure_device(func))
return 1;
device = p_slot->device;
device = func->device;
hp_slot = func->device - ctrl->slot_device_offset;
hp_slot = p_slot->device - ctrl->slot_device_offset;
p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
/* Change status to shutdown */
if (func->is_a_board)
func->status = 0x01;
func->configured = 0;
if (p_slot->is_a_board)
p_slot->status = 0x01;
p_slot->configured = 0;
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
@ -626,35 +428,8 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl)
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
if (ctrl->add_support) {
while (func) {
if (is_bridge(func)) {
dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n",
ctrl->seg, func->bus, func->device, func->function);
bridge_slot_remove(func);
} else {
dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n",
ctrl->seg, func->bus, func->device, func->function);
slot_remove(func);
}
func = pciehp_slot_find(ctrl->slot_bus, device, 0);
}
/* Setup slot structure with entry for empty slot */
func = pciehp_slot_create(ctrl->slot_bus);
if (func == NULL) {
return 1;
}
func->bus = ctrl->slot_bus;
func->device = device;
func->function = 0;
func->configured = 0;
func->switch_save = 0x10;
func->is_a_board = 0;
}
p_slot->switch_save = 0x10;
p_slot->is_a_board = 0;
return 0;
}
@ -851,7 +626,6 @@ static void interrupt_event_handler(struct controller *ctrl)
{
int loop = 0;
int change = 1;
struct pci_func *func;
u8 hp_slot;
u8 getstatus;
struct slot *p_slot;
@ -863,11 +637,9 @@ static void interrupt_event_handler(struct controller *ctrl)
if (ctrl->event_queue[loop].event_type != 0) {
hp_slot = ctrl->event_queue[loop].hp_slot;
func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
dbg("hp_slot %d, func %p, p_slot %p\n", hp_slot, func, p_slot);
dbg("hp_slot %d, p_slot %p\n", hp_slot, p_slot);
if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
dbg("button cancel\n");
@ -1015,13 +787,6 @@ int pciehp_enable_slot(struct slot *p_slot)
{
u8 getstatus = 0;
int rc;
struct pci_func *func;
func = pciehp_slot_find(p_slot->bus, p_slot->device, 0);
if (!func) {
dbg("%s: Error! slot NULL\n", __FUNCTION__);
return 1;
}
/* Check to see if (latch closed, card present, power off) */
down(&p_slot->ctrl->crit_sect);
@ -1051,45 +816,21 @@ int pciehp_enable_slot(struct slot *p_slot)
}
up(&p_slot->ctrl->crit_sect);
slot_remove(func);
func = pciehp_slot_create(p_slot->bus);
if (func == NULL)
return 1;
func->bus = p_slot->bus;
func->device = p_slot->device;
func->function = 0;
func->configured = 0;
func->is_a_board = 1;
p_slot->configured = 0;
p_slot->is_a_board = 1;
/* We have to save the presence info for these slots */
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
func->switch_save = !getstatus? 0x10:0;
p_slot->switch_save = !getstatus? 0x10:0;
rc = board_added(func, p_slot->ctrl);
rc = board_added(p_slot);
if (rc) {
if (is_bridge(func))
bridge_slot_remove(func);
else
slot_remove(func);
/* Setup slot structure with entry for empty slot */
func = pciehp_slot_create(p_slot->bus);
if (func == NULL)
return 1; /* Out of memory */
func->bus = p_slot->bus;
func->device = p_slot->device;
func->function = 0;
func->configured = 0;
func->is_a_board = 1;
/* We have to save the presence info for these slots */
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
p_slot->hpc_ops->get_adapter_status(p_slot,
&(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
func->switch_save = !getstatus? 0x10:0;
p_slot->switch_save = !getstatus? 0x10:0;
}
if (p_slot)
@ -1101,14 +842,8 @@ int pciehp_enable_slot(struct slot *p_slot)
int pciehp_disable_slot(struct slot *p_slot)
{
u8 class_code, header_type, BCR;
u8 index = 0;
u8 getstatus = 0;
u32 rc = 0;
int ret = 0;
unsigned int devfn;
struct pci_bus *pci_bus = p_slot->ctrl->pci_dev->subordinate;
struct pci_func *func;
if (!p_slot->ctrl)
return 1;
@ -1145,54 +880,8 @@ int pciehp_disable_slot(struct slot *p_slot)
up(&p_slot->ctrl->crit_sect);
func = pciehp_slot_find(p_slot->bus, p_slot->device, index++);
/* Make sure there are no video controllers here
* for all func of p_slot
*/
while (func && !rc) {
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
/* Check the Class Code */
rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
if (rc)
return rc;
if (class_code == PCI_BASE_CLASS_DISPLAY) {
/* Display/Video adapter (not supported) */
rc = REMOVE_NOT_SUPPORTED;
} else {
/* See if it's a bridge */
rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
if (rc)
return rc;
/* If it's a bridge, check the VGA Enable bit */
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
if (rc)
return rc;
/* If the VGA Enable bit is set, remove isn't supported */
if (BCR & PCI_BRIDGE_CTL_VGA) {
rc = REMOVE_NOT_SUPPORTED;
}
}
}
func = pciehp_slot_find(p_slot->bus, p_slot->device, index++);
}
func = pciehp_slot_find(p_slot->bus, p_slot->device, 0);
if ((func != NULL) && !rc) {
rc = remove_board(func, p_slot->ctrl);
} else if (!rc)
rc = 1;
if (p_slot)
update_slot_info(p_slot);
return rc;
ret = remove_board(p_slot);
update_slot_info(p_slot);
return ret;
}

View file

@ -101,346 +101,41 @@ int pciehp_configure_device(struct slot *p_slot)
return 0;
}
int pciehp_unconfigure_device(struct pci_func* func)
int pciehp_unconfigure_device(struct slot *p_slot)
{
int rc = 0;
int j;
struct pci_bus *pbus;
u8 bctl = 0;
dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
func->device, func->function);
pbus = func->pci_dev->bus;
dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus,
p_slot->device);
for (j=0; j<8 ; j++) {
struct pci_dev* temp = pci_find_slot(func->bus,
(func->device << 3) | j);
if (temp) {
pci_remove_bus_device(temp);
struct pci_dev* temp = pci_find_slot(p_slot->bus,
(p_slot->device << 3) | j);
if (!temp)
continue;
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
err("Cannot remove display device %s\n",
pci_name(temp));
continue;
}
if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
if (bctl & PCI_BRIDGE_CTL_VGA) {
err("Cannot remove display device %s\n",
pci_name(temp));
continue;
}
}
pci_remove_bus_device(temp);
}
/*
* Some PCI Express root ports require fixup after hot-plug operation.
*/
if (pcie_mch_quirk)
pci_fixup_device(pci_fixup_final, pbus->self);
pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);
return rc;
}
/*
* pciehp_save_config
*
* Reads configuration for all slots in a PCI bus and saves info.
*
* Note: For non-hot plug busses, the slot # saved is the device #
*
* returns 0 if success
*/
int pciehp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num)
{
int rc;
u8 class_code;
u8 header_type;
u32 ID;
u8 secondary_bus;
struct pci_func *new_slot;
int sub_bus;
int max_functions;
int function;
u8 DevError;
int device = 0;
int cloop = 0;
int stop_it;
int index;
int is_hot_plug = num_ctlr_slots || first_device_num;
struct pci_bus lpci_bus, *pci_bus;
int FirstSupported, LastSupported;
dbg("%s: Enter\n", __FUNCTION__);
memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
pci_bus = &lpci_bus;
dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
num_ctlr_slots, first_device_num);
/* Decide which slots are supported */
if (is_hot_plug) {
/*********************************
* is_hot_plug is the slot mask
*********************************/
FirstSupported = first_device_num;
LastSupported = FirstSupported + num_ctlr_slots - 1;
} else {
FirstSupported = 0;
LastSupported = 0x1F;
}
dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported,
LastSupported);
/* Save PCI configuration space for all devices in supported slots */
dbg("%s: pci_bus->number = %x\n", __FUNCTION__, pci_bus->number);
pci_bus->number = busnumber;
dbg("%s: bus = %x, dev = %x\n", __FUNCTION__, busnumber, device);
for (device = FirstSupported; device <= LastSupported; device++) {
ID = 0xFFFFFFFF;
rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
PCI_VENDOR_ID, &ID);
if (ID != 0xFFFFFFFF) { /* device in slot */
dbg("%s: ID = %x\n", __FUNCTION__, ID);
rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
0x0B, &class_code);
if (rc)
return rc;
rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
PCI_HEADER_TYPE, &header_type);
if (rc)
return rc;
dbg("class_code = %x, header_type = %x\n", class_code, header_type);
/* If multi-function device, set max_functions to 8 */
if (header_type & 0x80)
max_functions = 8;
else
max_functions = 1;
function = 0;
do {
DevError = 0;
dbg("%s: In do loop\n", __FUNCTION__);
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* P-P Bridge */
/* Recurse the subordinate bus
* get the subordinate bus number
*/
rc = pci_bus_read_config_byte(pci_bus,
PCI_DEVFN(device, function),
PCI_SECONDARY_BUS, &secondary_bus);
if (rc) {
return rc;
} else {
sub_bus = (int) secondary_bus;
/* Save secondary bus cfg spc with this recursive call. */
rc = pciehp_save_config(ctrl, sub_bus, 0, 0);
if (rc)
return rc;
}
}
index = 0;
new_slot = pciehp_slot_find(busnumber, device, index++);
dbg("%s: new_slot = %p bus %x dev %x fun %x\n",
__FUNCTION__, new_slot, busnumber, device, index-1);
while (new_slot && (new_slot->function != (u8) function)) {
new_slot = pciehp_slot_find(busnumber, device, index++);
dbg("%s: while loop, new_slot = %p bus %x dev %x fun %x\n",
__FUNCTION__, new_slot, busnumber, device, index-1);
}
if (!new_slot) {
/* Setup slot structure. */
new_slot = pciehp_slot_create(busnumber);
dbg("%s: if, new_slot = %p bus %x dev %x fun %x\n",
__FUNCTION__, new_slot, busnumber, device, function);
if (new_slot == NULL)
return(1);
}
new_slot->bus = (u8) busnumber;
new_slot->device = (u8) device;
new_slot->function = (u8) function;
new_slot->is_a_board = 1;
new_slot->switch_save = 0x10;
/* In case of unsupported board */
new_slot->status = DevError;
new_slot->pci_dev = pci_find_slot(new_slot->bus,
(new_slot->device << 3) | new_slot->function);
dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev);
for (cloop = 0; cloop < 0x20; cloop++) {
rc = pci_bus_read_config_dword(pci_bus,
PCI_DEVFN(device, function),
cloop << 2,
(u32 *) &(new_slot->config_space [cloop]));
/* dbg("new_slot->config_space[%x] = %x\n",
cloop, new_slot->config_space[cloop]); */
if (rc)
return rc;
}
function++;
stop_it = 0;
/* this loop skips to the next present function
* reading in Class Code and Header type.
*/
while ((function < max_functions)&&(!stop_it)) {
dbg("%s: In while loop \n", __FUNCTION__);
rc = pci_bus_read_config_dword(pci_bus,
PCI_DEVFN(device, function),
PCI_VENDOR_ID, &ID);
if (ID == 0xFFFFFFFF) { /* nothing there. */
function++;
dbg("Nothing there\n");
} else { /* Something there */
rc = pci_bus_read_config_byte(pci_bus,
PCI_DEVFN(device, function),
0x0B, &class_code);
if (rc)
return rc;
rc = pci_bus_read_config_byte(pci_bus,
PCI_DEVFN(device, function),
PCI_HEADER_TYPE, &header_type);
if (rc)
return rc;
dbg("class_code = %x, header_type = %x\n", class_code, header_type);
stop_it++;
}
}
} while (function < max_functions);
/* End of IF (device in slot?) */
} else if (is_hot_plug) {
/* Setup slot structure with entry for empty slot */
new_slot = pciehp_slot_create(busnumber);
if (new_slot == NULL) {
return(1);
}
dbg("new_slot = %p, bus = %x, dev = %x, fun = %x\n", new_slot,
new_slot->bus, new_slot->device, new_slot->function);
new_slot->bus = (u8) busnumber;
new_slot->device = (u8) device;
new_slot->function = 0;
new_slot->is_a_board = 0;
new_slot->presence_save = 0;
new_slot->switch_save = 0;
}
} /* End of FOR loop */
dbg("%s: Exit\n", __FUNCTION__);
return(0);
}
/*
* pciehp_save_slot_config
*
* Saves configuration info for all PCI devices in a given slot
* including subordinate busses.
*
* returns 0 if success
*/
int pciehp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot)
{
int rc;
u8 class_code;
u8 header_type;
u32 ID;
u8 secondary_bus;
int sub_bus;
int max_functions;
int function;
int cloop = 0;
int stop_it;
struct pci_bus lpci_bus, *pci_bus;
memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
pci_bus = &lpci_bus;
pci_bus->number = new_slot->bus;
ID = 0xFFFFFFFF;
pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0),
PCI_VENDOR_ID, &ID);
if (ID != 0xFFFFFFFF) { /* device in slot */
pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
0x0B, &class_code);
pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
PCI_HEADER_TYPE, &header_type);
if (header_type & 0x80) /* Multi-function device */
max_functions = 8;
else
max_functions = 1;
function = 0;
do {
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
/* Recurse the subordinate bus */
pci_bus_read_config_byte(pci_bus,
PCI_DEVFN(new_slot->device, function),
PCI_SECONDARY_BUS, &secondary_bus);
sub_bus = (int) secondary_bus;
/* Save the config headers for the secondary bus. */
rc = pciehp_save_config(ctrl, sub_bus, 0, 0);
if (rc)
return rc;
} /* End of IF */
new_slot->status = 0;
for (cloop = 0; cloop < 0x20; cloop++) {
pci_bus_read_config_dword(pci_bus,
PCI_DEVFN(new_slot->device, function),
cloop << 2,
(u32 *) &(new_slot->config_space [cloop]));
}
function++;
stop_it = 0;
/* this loop skips to the next present function
* reading in the Class Code and the Header type.
*/
while ((function < max_functions) && (!stop_it)) {
pci_bus_read_config_dword(pci_bus,
PCI_DEVFN(new_slot->device, function),
PCI_VENDOR_ID, &ID);
if (ID == 0xFFFFFFFF) { /* nothing there. */
function++;
} else { /* Something there */
pci_bus_read_config_byte(pci_bus,
PCI_DEVFN(new_slot->device, function),
0x0B, &class_code);
pci_bus_read_config_byte(pci_bus,
PCI_DEVFN(new_slot->device, function),
PCI_HEADER_TYPE, &header_type);
stop_it++;
}
}
} while (function < max_functions);
} /* End of IF (device in slot?) */
else {
return 2;
}
return 0;
}