mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-28 21:33:52 +00:00
Code Issues Releases Wiki Activity

ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup

Browse source 
During a short period when the bus voltage is switched from 3.3v to 1.8v,
(to enumerate UHS mode), the mmc module is disabled and the mmc IO lines
are kept in a state according to the programmed pad mux pull type.

According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications
Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the
host should hold CLK low for at least 5ms.

In order to keep the card line low during voltage switch, the pad mux of
mmc1_clk line should be configured to pull down.

Add a new pinctrl group for clock line without pullup to be used in boards
where mmc1_clk line is not connected to an external pullup.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Kishon Vijay Abraham I 2018-04-27 17:38:54 +05:30 committed by Tony Lindgren
parent bcf3c113ba
commit ca2618b5d5
1 changed files with 19 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

19
arch/arm/boot/dts/dra7-mmc-iodelay.dtsi Normal file
View file

@ -0,0 +1,19 @@
// SPDX-License-Identifier: GPL-2.0
/*
* MMC IOdelay values for TI's DRA7xx SoCs.
* Copyright (C) 2018 Texas Instruments
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
&dra7_pmx_core {
mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
};