mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-26 04:16:39 +00:00
Code Issues Releases Wiki Activity

spi: zynqmp-gqspi: switch to use modern name

Browse source 
Change legacy name master/slave to modern name host/target or controller.

No functional changed.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://msgid.link/r/20231128093031.3707034-25-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Yang Yingliang 2023-11-28 17:30:29 +08:00 committed by Mark Brown
parent 178ebb0c50
commit ca6f114372
No known key found for this signature in database
GPG key ID: 24D68B725D5487D0
1 changed files with 25 additions and 25 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

50
drivers/spi/spi-zynqmp-gqspi.c
View file

@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Xilinx Zynq UltraScale+ MPSoC Quad-SPI (QSPI) controller driver
* (master mode only)
* (host mode only)
*
* Copyright (C) 2009 - 2015 Xilinx, Inc.
*/
@ -235,21 +235,21 @@ static inline void zynqmp_gqspi_write(struct zynqmp_qspi *xqspi, u32 offset,
}
/**
* zynqmp_gqspi_selectslave - For selection of slave device
* zynqmp_gqspi_selecttarget - For selection of target device
* @instanceptr: Pointer to the zynqmp_qspi structure
* @slavecs: For chip select
* @slavebus: To check which bus is selected- upper or lower
* @targetcs: For chip select
* @targetbus: To check which bus is selected- upper or lower
*/
static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,
u8 slavecs, u8 slavebus)
static void zynqmp_gqspi_selecttarget(struct zynqmp_qspi *instanceptr,
u8 targetcs, u8 targetbus)
{
/*
* Bus and CS lines selected here will be updated in the instance and
* used for subsequent GENFIFO entries during transfer.
*/
/* Choose slave select line */
switch (slavecs) {
/* Choose target select line */
switch (targetcs) {
case GQSPI_SELECT_FLASH_CS_BOTH:
instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER |
GQSPI_GENFIFO_CS_UPPER;
@ -261,11 +261,11 @@ static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,
instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER;
break;
default:
dev_warn(instanceptr->dev, "Invalid slave select\n");
dev_warn(instanceptr->dev, "Invalid target select\n");
}
/* Choose the bus */
switch (slavebus) {
switch (targetbus) {
case GQSPI_SELECT_FLASH_BUS_BOTH:
instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER |
GQSPI_GENFIFO_BUS_UPPER;
@ -277,7 +277,7 @@ static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,
instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
break;
default:
dev_warn(instanceptr->dev, "Invalid slave bus\n");
dev_warn(instanceptr->dev, "Invalid target bus\n");
}
}
@ -337,13 +337,13 @@ static void zynqmp_qspi_set_tapdelay(struct zynqmp_qspi *xqspi, u32 baudrateval)
*
* The default settings of the QSPI controller's configurable parameters on
* reset are
* - Master mode
* - Host mode
* - TX threshold set to 1
* - RX threshold set to 1
* - Flash memory interface mode enabled
* This function performs the following actions
* - Disable and clear all the interrupts
* - Enable manual slave select
* - Enable manual target select
* - Enable manual start
* - Deselect all the chip select lines
* - Set the little endian mode of TX FIFO
@ -426,9 +426,9 @@ static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi)
GQSPI_RX_FIFO_THRESHOLD);
zynqmp_gqspi_write(xqspi, GQSPI_GF_THRESHOLD_OFST,
GQSPI_GEN_FIFO_THRESHOLD_RESET_VAL);
zynqmp_gqspi_selectslave(xqspi,
GQSPI_SELECT_FLASH_CS_LOWER,
GQSPI_SELECT_FLASH_BUS_LOWER);
zynqmp_gqspi_selecttarget(xqspi,
GQSPI_SELECT_FLASH_CS_LOWER,
GQSPI_SELECT_FLASH_BUS_LOWER);
/* Initialize DMA */
zynqmp_gqspi_write(xqspi,
GQSPI_QSPIDMA_DST_CTRL_OFST,
@ -459,7 +459,7 @@ static void zynqmp_qspi_copy_read_data(struct zynqmp_qspi *xqspi,
*/
static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
{
struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
struct zynqmp_qspi *xqspi = spi_controller_get_devdata(qspi->controller);
ulong timeout;
u32 genfifoentry = 0, statusreg;
@ -594,7 +594,7 @@ static int zynqmp_qspi_config_op(struct zynqmp_qspi *xqspi,
*/
static int zynqmp_qspi_setup_op(struct spi_device *qspi)
{
struct spi_controller *ctlr = qspi->master;
struct spi_controller *ctlr = qspi->controller;
struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
if (ctlr->busy)
@ -1048,7 +1048,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
struct zynqmp_qspi *xqspi = spi_controller_get_devdata
(mem->spi->master);
(mem->spi->controller);
int err = 0, i;
u32 genfifoentry = 0;
u16 opcode = op->cmd.opcode;
@ -1224,7 +1224,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
u32 num_cs;
const struct qspi_platform_data *p_data;
ctlr = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
ctlr = spi_alloc_host(&pdev->dev, sizeof(*xqspi));
if (!ctlr)
return -ENOMEM;
@ -1240,27 +1240,27 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
xqspi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(xqspi->regs)) {
ret = PTR_ERR(xqspi->regs);
goto remove_master;
goto remove_ctlr;
}
xqspi->pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(xqspi->pclk)) {
dev_err(dev, "pclk clock not found.\n");
ret = PTR_ERR(xqspi->pclk);
goto remove_master;
goto remove_ctlr;
}
xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
if (IS_ERR(xqspi->refclk)) {
dev_err(dev, "ref_clk clock not found.\n");
ret = PTR_ERR(xqspi->refclk);
goto remove_master;
goto remove_ctlr;
}
ret = clk_prepare_enable(xqspi->pclk);
if (ret) {
dev_err(dev, "Unable to enable APB clock.\n");
goto remove_master;
goto remove_ctlr;
}
ret = clk_prepare_enable(xqspi->refclk);
@ -1346,7 +1346,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
clk_disable_unprepare(xqspi->refclk);
clk_dis_pclk:
clk_disable_unprepare(xqspi->pclk);
remove_master:
remove_ctlr:
spi_controller_put(ctlr);
return ret;