mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

ata changes for 6.6-rc2 

- Fix link power management transitions to disallow unsupported
    states (Niklas).
 
  - A small string handling fix for the sata_mv driver (Christophe).
 
  - Clear port pending interrupts before reset, as per AHCI
    specifications (Szuying). Followup fixes for this one are to not
    clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to
    continue on with other actions recorded with error interrupts
    triggered before EH completes. A~Nd an additional fix to avoid
    thawing a port twice in EH (Niklas).
 
  - Small code style fixes in the pata_parport driver to silence the
    build bot as it keeps complaining about bad indentation (me).
 
  - A fix for the recent CDL code to avoid fetching sense data for
    successful commands when not necessary for correct operation
    (Niklas).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZQWcYAAKCRDdoc3SxdoY
 dg0HAQDxkfzueH5T00LSsg9+jI73eMScmC7asR3cbwmEiTRATgEAxpWUgaR7e7YP
 ZM9XWTyfcCYTfAEaJduS5a6ThHl3pAI=
 =gTtf
 -----END PGP SIGNATURE-----

Merge tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:

 - Fix link power management transitions to disallow unsupported states
   (Niklas)

 - A small string handling fix for the sata_mv driver (Christophe)

 - Clear port pending interrupts before reset, as per AHCI
   specifications (Szuying).

   Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
   ata_eh_reset() to allow EH to continue on with other actions recorded
   with error interrupts triggered before EH completes. And an
   additional fix to avoid thawing a port twice in EH (Niklas)

 - Small code style fixes in the pata_parport driver to silence the
   build bot as it keeps complaining about bad indentation (me)

 - A fix for the recent CDL code to avoid fetching sense data for
   successful commands when not necessary for correct operation (Niklas)

* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-core: fetch sense data for successful commands iff CDL enabled
  ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  ata: pata_parport: Fix code style issues
  ata: libahci: clear pending interrupt status
  ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  ata: libata: disallow dev-initiated LPM transitions to unsupported states
This commit is contained in:
Linus Torvalds 2023-09-16 11:49:57 -07:00
parent cce67b6bed 5e35a9ac3f
commit cc3e5afc6a
8 changed files with 63 additions and 40 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/ata/ahci.c
View File

@ -1883,6 +1883,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
else
dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n");
if (!(hpriv->cap & HOST_CAP_PART))
host->flags |= ATA_HOST_NO_PART;
if (!(hpriv->cap & HOST_CAP_SSC))
host->flags |= ATA_HOST_NO_SSC;
if (!(hpriv->cap2 & HOST_CAP2_SDS))
host->flags |= ATA_HOST_NO_DEVSLP;
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);

35
drivers/ata/libahci.c
View File

@ -1256,6 +1256,26 @@ static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
return sprintf(buf, "%d\n", emp->blink_policy);
}
static void ahci_port_clear_pending_irq(struct ata_port *ap)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
/* clear SError */
tmp = readl(port_mmio + PORT_SCR_ERR);
dev_dbg(ap->host->dev, "PORT_SCR_ERR 0x%x\n", tmp);
writel(tmp, port_mmio + PORT_SCR_ERR);
/* clear port IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
dev_dbg(ap->host->dev, "PORT_IRQ_STAT 0x%x\n", tmp);
if (tmp)
writel(tmp, port_mmio + PORT_IRQ_STAT);
writel(1 << ap->port_no, hpriv->mmio + HOST_IRQ_STAT);
}
static void ahci_port_init(struct device *dev, struct ata_port *ap,
int port_no, void __iomem *mmio,
void __iomem *port_mmio)
@ -1270,18 +1290,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
if (rc)
dev_warn(dev, "%s (%d)\n", emsg, rc);
/* clear SError */
tmp = readl(port_mmio + PORT_SCR_ERR);
dev_dbg(dev, "PORT_SCR_ERR 0x%x\n", tmp);
writel(tmp, port_mmio + PORT_SCR_ERR);
/* clear port IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
dev_dbg(dev, "PORT_IRQ_STAT 0x%x\n", tmp);
if (tmp)
writel(tmp, port_mmio + PORT_IRQ_STAT);
writel(1 << port_no, mmio + HOST_IRQ_STAT);
ahci_port_clear_pending_irq(ap);
/* mark esata ports */
tmp = readl(port_mmio + PORT_CMD);
@ -1603,6 +1612,8 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
tf.status = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
ahci_port_clear_pending_irq(ap);
rc = sata_link_hardreset(link, timing, deadline, online,
ahci_check_ready);

7
drivers/ata/libata-core.c
View File

@ -4783,11 +4783,8 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
* been aborted by the device due to a limit timeout using the policy
* 0xD. For these commands, invoke EH to get the command sense data.
*/
if (qc->result_tf.status & ATA_SENSE &&
((ata_is_ncq(qc->tf.protocol) &&
dev->flags & ATA_DFLAG_CDL_ENABLED) ||
(!ata_is_ncq(qc->tf.protocol) &&
ata_id_sense_reporting_enabled(dev->id)))) {
if (qc->flags & ATA_QCFLAG_HAS_CDL &&
qc->result_tf.status & ATA_SENSE) {
/*
* Tell SCSI EH to not overwrite scmd->result even if this
* command is finished with result SAM_STAT_GOOD.

16
drivers/ata/libata-eh.c
View File

@ -2796,23 +2796,13 @@ int ata_eh_reset(struct ata_link *link, int classify,
}
}
/*
* Some controllers can't be frozen very well and may set spurious
* error conditions during reset. Clear accumulated error
* information and re-thaw the port if frozen. As reset is the
* final recovery action and we cross check link onlineness against
* device classification later, no hotplug event is lost by this.
*/
/* clear cached SError */
spin_lock_irqsave(link->ap->lock, flags);
memset(&link->eh_info, 0, sizeof(link->eh_info));
link->eh_info.serror = 0;
if (slave)
memset(&slave->eh_info, 0, sizeof(link->eh_info));
ap->pflags &= ~ATA_PFLAG_EH_PENDING;
slave->eh_info.serror = 0;
spin_unlock_irqrestore(link->ap->lock, flags);
if (ata_port_is_frozen(ap))
ata_eh_thaw_port(ap);
/*
* Make sure onlineness and classification result correspond.
* Hotplug could have happened during reset and some

19
drivers/ata/libata-sata.c
View File

@ -396,10 +396,23 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
case ATA_LPM_MED_POWER_WITH_DIPM:
case ATA_LPM_MIN_POWER_WITH_PARTIAL:
case ATA_LPM_MIN_POWER:
if (ata_link_nr_enabled(link) > 0)
/* no restrictions on LPM transitions */
if (ata_link_nr_enabled(link) > 0) {
/* assume no restrictions on LPM transitions */
scontrol &= ~(0x7 << 8);
else {
/*
* If the controller does not support partial, slumber,
* or devsleep, then disallow these transitions.
*/
if (link->ap->host->flags & ATA_HOST_NO_PART)
scontrol |= (0x1 << 8);
if (link->ap->host->flags & ATA_HOST_NO_SSC)
scontrol |= (0x2 << 8);
if (link->ap->host->flags & ATA_HOST_NO_DEVSLP)
scontrol |= (0x4 << 8);
} else {
/* empty port, power off */
scontrol &= ~0xf;
scontrol |= (0x1 << 2);

9
drivers/ata/pata_parport/comm.c
View File

@ -37,7 +37,7 @@ static int comm_read_regr(struct pi_adapter *pi, int cont, int regr)
{
int l, h, r;
r = regr + cont_map[cont];
r = regr + cont_map[cont];
switch (pi->mode) {
case 0:
@ -90,7 +90,6 @@ static void comm_connect(struct pi_adapter *pi)
}
static void comm_disconnect(struct pi_adapter *pi)
{
w2(0); w2(0); w2(0); w2(4);
w0(pi->saved_r0);
@ -172,12 +171,12 @@ static void comm_write_block(struct pi_adapter *pi, char *buf, int count)
w4l(swab16(((u16 *)buf)[2 * k]) |
swab16(((u16 *)buf)[2 * k + 1]) << 16);
break;
}
}
}
static void comm_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
{
char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
dev_info(&pi->dev,
"DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",

4
drivers/ata/sata_mv.c
View File

@ -1255,8 +1255,8 @@ static void mv_dump_mem(struct device *dev, void __iomem *start, unsigned bytes)
for (b = 0; b < bytes; ) {
for (w = 0, o = 0; b < bytes && w < 4; w++) {
o += snprintf(linebuf + o, sizeof(linebuf) - o,
"%08x ", readl(start + b));
o += scnprintf(linebuf + o, sizeof(linebuf) - o,
"%08x ", readl(start + b));
b += sizeof(u32);
}
dev_dbg(dev, "%s: %p: %s\n",

4
include/linux/libata.h
View File

@ -222,6 +222,10 @@ enum {
ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */
ATA_HOST_IGNORE_ATA = (1 << 3), /* Ignore ATA devices on this host. */
ATA_HOST_NO_PART = (1 << 4), /* Host does not support partial */
ATA_HOST_NO_SSC = (1 << 5), /* Host does not support slumber */
ATA_HOST_NO_DEVSLP = (1 << 6), /* Host does not support devslp */
/* bits 24:31 of host->flags are reserved for LLD specific flags */
/* various lengths of time */