xen64: add 64-bit assembler

Split xen-asm into 32- and 64-bit files, and implement the 64-bit
variants.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Jeremy Fitzhardinge 2008-07-08 15:06:46 -07:00 committed by Ingo Molnar
parent 555cf2b580
commit cdacc1278b
3 changed files with 142 additions and 1 deletions

View file

@ -1,4 +1,4 @@
obj-y := enlighten.o setup.o multicalls.o mmu.o \
time.o xen-asm.o grant-table.o suspend.o
time.o xen-asm_$(BITS).o grant-table.o suspend.o
obj-$(CONFIG_SMP) += smp.o

141
arch/x86/xen/xen-asm_64.S Normal file
View file

@ -0,0 +1,141 @@
/*
Asm versions of Xen pv-ops, suitable for either direct use or inlining.
The inline versions are the same as the direct-use versions, with the
pre- and post-amble chopped off.
This code is encoded for size rather than absolute efficiency,
with a view to being able to inline as much as possible.
We only bother with direct forms (ie, vcpu in pda) of the operations
here; the indirect forms are better handled in C, since they're
generally too large to inline anyway.
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/processor-flags.h>
#include <xen/interface/xen.h>
#define RELOC(x, v) .globl x##_reloc; x##_reloc=v
#define ENDPATCH(x) .globl x##_end; x##_end=.
/* Pseudo-flag used for virtual NMI, which we don't implement yet */
#define XEN_EFLAGS_NMI 0x80000000
#if 0
#include <asm/percpu.h>
/*
Enable events. This clears the event mask and tests the pending
event status with one and operation. If there are pending
events, then enter the hypervisor to get them handled.
*/
ENTRY(xen_irq_enable_direct)
/* Unmask events */
movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
/* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */
/* Test for pending */
testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
jz 1f
2: call check_events
1:
ENDPATCH(xen_irq_enable_direct)
ret
ENDPROC(xen_irq_enable_direct)
RELOC(xen_irq_enable_direct, 2b+1)
/*
Disabling events is simply a matter of making the event mask
non-zero.
*/
ENTRY(xen_irq_disable_direct)
movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
ENDPATCH(xen_irq_disable_direct)
ret
ENDPROC(xen_irq_disable_direct)
RELOC(xen_irq_disable_direct, 0)
/*
(xen_)save_fl is used to get the current interrupt enable status.
Callers expect the status to be in X86_EFLAGS_IF, and other bits
may be set in the return value. We take advantage of this by
making sure that X86_EFLAGS_IF has the right value (and other bits
in that byte are 0), but other bits in the return value are
undefined. We need to toggle the state of the bit, because
Xen and x86 use opposite senses (mask vs enable).
*/
ENTRY(xen_save_fl_direct)
testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
setz %ah
addb %ah,%ah
ENDPATCH(xen_save_fl_direct)
ret
ENDPROC(xen_save_fl_direct)
RELOC(xen_save_fl_direct, 0)
/*
In principle the caller should be passing us a value return
from xen_save_fl_direct, but for robustness sake we test only
the X86_EFLAGS_IF flag rather than the whole byte. After
setting the interrupt mask state, it checks for unmasked
pending events and enters the hypervisor to get them delivered
if so.
*/
ENTRY(xen_restore_fl_direct)
testb $X86_EFLAGS_IF>>8, %ah
setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
/* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */
/* check for unmasked and pending */
cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
jz 1f
2: call check_events
1:
ENDPATCH(xen_restore_fl_direct)
ret
ENDPROC(xen_restore_fl_direct)
RELOC(xen_restore_fl_direct, 2b+1)
/*
Force an event check by making a hypercall,
but preserve regs before making the call.
*/
check_events:
push %rax
push %rcx
push %rdx
push %rsi
push %rdi
push %r8
push %r9
push %r10
push %r11
call force_evtchn_callback
pop %r11
pop %r10
pop %r9
pop %r8
pop %rdi
pop %rsi
pop %rdx
pop %rcx
pop %rax
ret
#endif
ENTRY(xen_iret)
pushq $0
jmp hypercall_page + __HYPERVISOR_iret * 32
ENTRY(xen_sysexit)
ud2a