pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}
This is part of the effort moving peripheral registers outside of pxa-regs.h, and using ioremap() make it possible the same IP can be re-used on different processors with different registers space As a result, the fixed mapping in pxa_map_io() is removed. The regs-lcd.h can actually moved to where closer to pxafb.c but some of its bit definitions are directly used by various platform code, though this is not a good style. Signed-off-by: eric miao <eric.miao@marvell.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
eric miao
Linus Torvalds
parent
92ac73c1e4
commit
ce4fb7b892
|
|
@ -90,11 +90,6 @@ static struct map_desc standard_io_desc[] __initdata = {
|
|||
.pfn = __phys_to_pfn(0x40000000),
|
||||
.length = 0x02000000,
|
||||
.type = MT_DEVICE
|
||||
}, { /* LCD */
|
||||
.virtual = 0xf4000000,
|
||||
.pfn = __phys_to_pfn(0x44000000),
|
||||
.length = 0x00100000,
|
||||
.type = MT_DEVICE
|
||||
}, { /* Mem Ctl */
|
||||
.virtual = 0xf6000000,
|
||||
.pfn = __phys_to_pfn(0x48000000),
|
||||
|
|
|
|||
|
|
@ -687,7 +687,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
|
|||
fbi->reg_lccr1 = new_regs.lccr1;
|
||||
fbi->reg_lccr2 = new_regs.lccr2;
|
||||
fbi->reg_lccr3 = new_regs.lccr3;
|
||||
fbi->reg_lccr4 = LCCR4 & (~LCCR4_PAL_FOR_MASK);
|
||||
fbi->reg_lccr4 = __raw_readl(fbi->mmio_base + LCCR4) &
|
||||
(~LCCR4_PAL_FOR_MASK);
|
||||
fbi->reg_lccr4 |= (fbi->lccr4 & LCCR4_PAL_FOR_MASK);
|
||||
set_hsync_time(fbi, pcd);
|
||||
local_irq_restore(flags);
|
||||
|
|
@ -696,9 +697,12 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
|
|||
* Only update the registers if the controller is enabled
|
||||
* and something has changed.
|
||||
*/
|
||||
if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) ||
|
||||
(LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) ||
|
||||
(FDADR0 != fbi->fdadr0) || (FDADR1 != fbi->fdadr1))
|
||||
if ((__raw_readl(fbi->mmio_base + LCCR0) != fbi->reg_lccr0) ||
|
||||
(__raw_readl(fbi->mmio_base + LCCR1) != fbi->reg_lccr1) ||
|
||||
(__raw_readl(fbi->mmio_base + LCCR2) != fbi->reg_lccr2) ||
|
||||
(__raw_readl(fbi->mmio_base + LCCR3) != fbi->reg_lccr3) ||
|
||||
(__raw_readl(fbi->mmio_base + FDADR0) != fbi->fdadr0) ||
|
||||
(__raw_readl(fbi->mmio_base + FDADR1) != fbi->fdadr1))
|
||||
pxafb_schedule_work(fbi, C_REENABLE);
|
||||
|
||||
return 0;
|
||||
|
|
@ -784,26 +788,31 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
|
|||
clk_enable(fbi->clk);
|
||||
|
||||
/* Sequence from 11.7.10 */
|
||||
LCCR3 = fbi->reg_lccr3;
|
||||
LCCR2 = fbi->reg_lccr2;
|
||||
LCCR1 = fbi->reg_lccr1;
|
||||
LCCR0 = fbi->reg_lccr0 & ~LCCR0_ENB;
|
||||
__raw_writel(fbi->reg_lccr3, fbi->mmio_base + LCCR3);
|
||||
__raw_writel(fbi->reg_lccr2, fbi->mmio_base + LCCR2);
|
||||
__raw_writel(fbi->reg_lccr1, fbi->mmio_base + LCCR1);
|
||||
__raw_writel(fbi->reg_lccr0 & ~LCCR0_ENB, fbi->mmio_base + LCCR0);
|
||||
|
||||
FDADR0 = fbi->fdadr0;
|
||||
FDADR1 = fbi->fdadr1;
|
||||
LCCR0 |= LCCR0_ENB;
|
||||
__raw_writel(fbi->fdadr0, fbi->mmio_base + FDADR0);
|
||||
__raw_writel(fbi->fdadr1, fbi->mmio_base + FDADR1);
|
||||
__raw_writel(fbi->reg_lccr0 | LCCR0_ENB, fbi->mmio_base + LCCR0);
|
||||
}
|
||||
|
||||
static void pxafb_disable_controller(struct pxafb_info *fbi)
|
||||
{
|
||||
uint32_t lccr0;
|
||||
|
||||
DECLARE_WAITQUEUE(wait, current);
|
||||
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
add_wait_queue(&fbi->ctrlr_wait, &wait);
|
||||
|
||||
LCSR = 0xffffffff; /* Clear LCD Status Register */
|
||||
LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
|
||||
LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
|
||||
/* Clear LCD Status Register */
|
||||
__raw_writel(0xffffffff, fbi->mmio_base + LCSR);
|
||||
|
||||
lccr0 = __raw_readl(fbi->mmio_base + LCCR0) & ~LCCR0_LDM;
|
||||
__raw_writel(lccr0, fbi->mmio_base + LCCR0);
|
||||
__raw_writel(lccr0 | LCCR0_DIS, fbi->mmio_base + LCCR0);
|
||||
|
||||
schedule_timeout(200 * HZ / 1000);
|
||||
remove_wait_queue(&fbi->ctrlr_wait, &wait);
|
||||
|
|
@ -818,14 +827,15 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
|
|||
static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct pxafb_info *fbi = dev_id;
|
||||
unsigned int lcsr = LCSR;
|
||||
unsigned int lccr0, lcsr = __raw_readl(fbi->mmio_base + LCSR);
|
||||
|
||||
if (lcsr & LCSR_LDD) {
|
||||
LCCR0 |= LCCR0_LDM;
|
||||
lccr0 = __raw_readl(fbi->mmio_base + LCCR0) | LCCR0_LDM;
|
||||
__raw_writel(lccr0, fbi->mmio_base + LCCR0);
|
||||
wake_up(&fbi->ctrlr_wait);
|
||||
}
|
||||
|
||||
LCSR = lcsr;
|
||||
__raw_writel(lcsr, fbi->mmio_base + LCSR);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
|
|
@ -1343,7 +1353,8 @@ static int __init pxafb_probe(struct platform_device *dev)
|
|||
{
|
||||
struct pxafb_info *fbi;
|
||||
struct pxafb_mach_info *inf;
|
||||
int ret;
|
||||
struct resource *r;
|
||||
int irq, ret;
|
||||
|
||||
dev_dbg(&dev->dev, "pxafb_probe\n");
|
||||
|
||||
|
|
@ -1406,19 +1417,47 @@ static int __init pxafb_probe(struct platform_device *dev)
|
|||
goto failed;
|
||||
}
|
||||
|
||||
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
||||
if (r == NULL) {
|
||||
dev_err(&dev->dev, "no I/O memory resource defined\n");
|
||||
ret = -ENODEV;
|
||||
goto failed;
|
||||
}
|
||||
|
||||
r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
|
||||
if (r == NULL) {
|
||||
dev_err(&dev->dev, "failed to request I/O memory\n");
|
||||
ret = -EBUSY;
|
||||
goto failed;
|
||||
}
|
||||
|
||||
fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
|
||||
if (fbi->mmio_base == NULL) {
|
||||
dev_err(&dev->dev, "failed to map I/O memory\n");
|
||||
ret = -EBUSY;
|
||||
goto failed_free_res;
|
||||
}
|
||||
|
||||
/* Initialize video memory */
|
||||
ret = pxafb_map_video_memory(fbi);
|
||||
if (ret) {
|
||||
dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret);
|
||||
ret = -ENOMEM;
|
||||
goto failed;
|
||||
goto failed_free_io;
|
||||
}
|
||||
|
||||
ret = request_irq(IRQ_LCD, pxafb_handle_irq, IRQF_DISABLED, "LCD", fbi);
|
||||
irq = platform_get_irq(dev, 0);
|
||||
if (irq < 0) {
|
||||
dev_err(&dev->dev, "no IRQ defined\n");
|
||||
ret = -ENODEV;
|
||||
goto failed_free_mem;
|
||||
}
|
||||
|
||||
ret = request_irq(irq, pxafb_handle_irq, IRQF_DISABLED, "LCD", fbi);
|
||||
if (ret) {
|
||||
dev_err(&dev->dev, "request_irq failed: %d\n", ret);
|
||||
ret = -EBUSY;
|
||||
goto failed;
|
||||
goto failed_free_mem;
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -1434,7 +1473,7 @@ static int __init pxafb_probe(struct platform_device *dev)
|
|||
if (ret < 0) {
|
||||
dev_err(&dev->dev,
|
||||
"Failed to register framebuffer device: %d\n", ret);
|
||||
goto failed;
|
||||
goto failed_free_irq;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_CPU_FREQ
|
||||
|
|
@ -1453,6 +1492,15 @@ static int __init pxafb_probe(struct platform_device *dev)
|
|||
|
||||
return 0;
|
||||
|
||||
failed_free_irq:
|
||||
free_irq(irq, fbi);
|
||||
failed_free_res:
|
||||
release_mem_region(r->start, r->end - r->start + 1);
|
||||
failed_free_io:
|
||||
iounmap(fbi->mmio_base);
|
||||
failed_free_mem:
|
||||
dma_free_writecombine(&dev->dev, fbi->map_size,
|
||||
fbi->map_cpu, fbi->map_dma);
|
||||
failed:
|
||||
platform_set_drvdata(dev, NULL);
|
||||
kfree(fbi);
|
||||
|
|
|
|||
|
|
@ -42,6 +42,8 @@ struct pxafb_info {
|
|||
struct device *dev;
|
||||
struct clk *clk;
|
||||
|
||||
void __iomem *mmio_base;
|
||||
|
||||
/*
|
||||
* These are the addresses we mapped
|
||||
* the framebuffer memory region to.
|
||||
|
|
|
|||
|
|
@ -1406,202 +1406,6 @@
|
|||
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
|
||||
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
|
||||
|
||||
|
||||
/*
|
||||
* LCD
|
||||
*/
|
||||
|
||||
#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */
|
||||
#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */
|
||||
#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */
|
||||
#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */
|
||||
#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 3 */
|
||||
#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
|
||||
#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
|
||||
#define LCSR __REG(0x44000038) /* LCD Controller Status Register */
|
||||
#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */
|
||||
#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */
|
||||
#define TMEDCR __REG(0x44000044) /* TMED Control Register */
|
||||
|
||||
#define LCCR3_1BPP (0 << 24)
|
||||
#define LCCR3_2BPP (1 << 24)
|
||||
#define LCCR3_4BPP (2 << 24)
|
||||
#define LCCR3_8BPP (3 << 24)
|
||||
#define LCCR3_16BPP (4 << 24)
|
||||
|
||||
#define LCCR3_PDFOR_0 (0 << 30)
|
||||
#define LCCR3_PDFOR_1 (1 << 30)
|
||||
#define LCCR3_PDFOR_2 (2 << 30)
|
||||
#define LCCR3_PDFOR_3 (3 << 30)
|
||||
|
||||
#define LCCR4_PAL_FOR_0 (0 << 15)
|
||||
#define LCCR4_PAL_FOR_1 (1 << 15)
|
||||
#define LCCR4_PAL_FOR_2 (2 << 15)
|
||||
#define LCCR4_PAL_FOR_MASK (3 << 15)
|
||||
|
||||
#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */
|
||||
#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */
|
||||
#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */
|
||||
#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */
|
||||
#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */
|
||||
#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */
|
||||
#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */
|
||||
#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */
|
||||
|
||||
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
|
||||
#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
|
||||
#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
|
||||
#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
|
||||
#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display */
|
||||
/* Select */
|
||||
#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
|
||||
#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
|
||||
|
||||
#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
|
||||
#define LCCR0_SFM (1 << 4) /* Start of frame mask */
|
||||
#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
|
||||
#define LCCR0_EFM (1 << 6) /* End of Frame mask */
|
||||
#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */
|
||||
#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
|
||||
#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
|
||||
#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome */
|
||||
/* display mode) */
|
||||
#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
|
||||
/* display */
|
||||
#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
|
||||
/* display */
|
||||
#define LCCR0_DIS (1 << 10) /* LCD Disable */
|
||||
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
|
||||
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
|
||||
#define LCCR0_PDD_S 12
|
||||
#define LCCR0_BM (1 << 20) /* Branch mask */
|
||||
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
|
||||
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
|
||||
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
|
||||
#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */
|
||||
#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */
|
||||
#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */
|
||||
|
||||
#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
|
||||
#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \
|
||||
(((Pixel) - 1) << FShft (LCCR1_PPL))
|
||||
|
||||
#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
|
||||
#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
|
||||
/* pulse Width [1..64 Tpix] */ \
|
||||
(((Tpix) - 1) << FShft (LCCR1_HSW))
|
||||
|
||||
#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
|
||||
/* count - 1 [Tpix] */
|
||||
#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
|
||||
/* [1..256 Tpix] */ \
|
||||
(((Tpix) - 1) << FShft (LCCR1_ELW))
|
||||
|
||||
#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
|
||||
/* Wait count - 1 [Tpix] */
|
||||
#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
|
||||
/* [1..256 Tpix] */ \
|
||||
(((Tpix) - 1) << FShft (LCCR1_BLW))
|
||||
|
||||
|
||||
#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
|
||||
#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
|
||||
(((Line) - 1) << FShft (LCCR2_LPP))
|
||||
|
||||
#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
|
||||
/* Width - 1 [Tln] (L_FCLK) */
|
||||
#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
|
||||
/* Width [1..64 Tln] */ \
|
||||
(((Tln) - 1) << FShft (LCCR2_VSW))
|
||||
|
||||
#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
|
||||
/* count [Tln] */
|
||||
#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
|
||||
/* [0..255 Tln] */ \
|
||||
((Tln) << FShft (LCCR2_EFW))
|
||||
|
||||
#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
|
||||
/* Wait count [Tln] */
|
||||
#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
|
||||
/* [0..255 Tln] */ \
|
||||
((Tln) << FShft (LCCR2_BFW))
|
||||
|
||||
#if 0
|
||||
#define LCCR3_PCD (0xff) /* Pixel clock divisor */
|
||||
#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */
|
||||
#define LCCR3_ACB_S 8
|
||||
#endif
|
||||
|
||||
#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
|
||||
#define LCCR3_API_S 16
|
||||
#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
|
||||
#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
|
||||
#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */
|
||||
#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
|
||||
#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
|
||||
|
||||
#define LCCR3_OEP (1 << 23) /* Output Enable Polarity (L_BIAS, */
|
||||
/* active display mode) */
|
||||
#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
|
||||
#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
|
||||
|
||||
#if 0
|
||||
#define LCCR3_BPP (7 << 24) /* bits per pixel */
|
||||
#define LCCR3_BPP_S 24
|
||||
#endif
|
||||
#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
|
||||
|
||||
|
||||
#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
|
||||
#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \
|
||||
(((Div) << FShft (LCCR3_PCD)))
|
||||
|
||||
|
||||
#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
|
||||
#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \
|
||||
(((Bpp) << FShft (LCCR3_BPP)))
|
||||
|
||||
#define LCCR3_ACB Fld (8, 8) /* AC Bias */
|
||||
#define LCCR3_Acb(Acb) /* BAC Bias */ \
|
||||
(((Acb) << FShft (LCCR3_ACB)))
|
||||
|
||||
#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
|
||||
/* pulse active High */
|
||||
#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
|
||||
|
||||
#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
|
||||
/* active High */
|
||||
#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
|
||||
/* active Low */
|
||||
|
||||
#define LCSR_LDD (1 << 0) /* LCD Disable Done */
|
||||
#define LCSR_SOF (1 << 1) /* Start of frame */
|
||||
#define LCSR_BER (1 << 2) /* Bus error */
|
||||
#define LCSR_ABC (1 << 3) /* AC Bias count */
|
||||
#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
|
||||
#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
|
||||
#define LCSR_OU (1 << 6) /* output FIFO underrun */
|
||||
#define LCSR_QD (1 << 7) /* quick disable */
|
||||
#define LCSR_EOF (1 << 8) /* end of frame */
|
||||
#define LCSR_BS (1 << 9) /* branch status */
|
||||
#define LCSR_SINT (1 << 10) /* subsequent interrupt */
|
||||
|
||||
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
|
||||
|
||||
#define LCSR_LDD (1 << 0) /* LCD Disable Done */
|
||||
#define LCSR_SOF (1 << 1) /* Start of frame */
|
||||
#define LCSR_BER (1 << 2) /* Bus error */
|
||||
#define LCSR_ABC (1 << 3) /* AC Bias count */
|
||||
#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
|
||||
#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
|
||||
#define LCSR_OU (1 << 6) /* output FIFO underrun */
|
||||
#define LCSR_QD (1 << 7) /* quick disable */
|
||||
#define LCSR_EOF (1 << 8) /* end of frame */
|
||||
#define LCSR_BS (1 << 9) /* branch status */
|
||||
#define LCSR_SINT (1 << 10) /* subsequent interrupt */
|
||||
|
||||
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
|
||||
|
||||
#ifdef CONFIG_PXA27x
|
||||
|
||||
/* Camera Interface */
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@
|
|||
*/
|
||||
|
||||
#include <linux/fb.h>
|
||||
#include <asm/arch/regs-lcd.h>
|
||||
|
||||
/*
|
||||
* This structure describes the machine which we are running on.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,139 @@
|
|||
#ifndef __ASM_ARCH_REGS_LCD_H
|
||||
#define __ASM_ARCH_REGS_LCD_H
|
||||
/*
|
||||
* LCD Controller Registers and Bits Definitions
|
||||
*/
|
||||
#define LCCR0 (0x000) /* LCD Controller Control Register 0 */
|
||||
#define LCCR1 (0x004) /* LCD Controller Control Register 1 */
|
||||
#define LCCR2 (0x008) /* LCD Controller Control Register 2 */
|
||||
#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
|
||||
#define LCCR4 (0x010) /* LCD Controller Control Register 3 */
|
||||
#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
|
||||
#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
|
||||
#define LCSR (0x038) /* LCD Controller Status Register */
|
||||
#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */
|
||||
#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
|
||||
#define TMEDCR (0x044) /* TMED Control Register */
|
||||
|
||||
#define LCCR3_1BPP (0 << 24)
|
||||
#define LCCR3_2BPP (1 << 24)
|
||||
#define LCCR3_4BPP (2 << 24)
|
||||
#define LCCR3_8BPP (3 << 24)
|
||||
#define LCCR3_16BPP (4 << 24)
|
||||
|
||||
#define LCCR3_PDFOR_0 (0 << 30)
|
||||
#define LCCR3_PDFOR_1 (1 << 30)
|
||||
#define LCCR3_PDFOR_2 (2 << 30)
|
||||
#define LCCR3_PDFOR_3 (3 << 30)
|
||||
|
||||
#define LCCR4_PAL_FOR_0 (0 << 15)
|
||||
#define LCCR4_PAL_FOR_1 (1 << 15)
|
||||
#define LCCR4_PAL_FOR_2 (2 << 15)
|
||||
#define LCCR4_PAL_FOR_MASK (3 << 15)
|
||||
|
||||
#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
|
||||
#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */
|
||||
#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */
|
||||
#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */
|
||||
#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
|
||||
#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */
|
||||
#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */
|
||||
#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */
|
||||
|
||||
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
|
||||
#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
|
||||
#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
|
||||
#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
|
||||
#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */
|
||||
#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
|
||||
#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
|
||||
|
||||
#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
|
||||
#define LCCR0_SFM (1 << 4) /* Start of frame mask */
|
||||
#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
|
||||
#define LCCR0_EFM (1 << 6) /* End of Frame mask */
|
||||
#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */
|
||||
#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
|
||||
#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
|
||||
#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */
|
||||
#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */
|
||||
#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */
|
||||
#define LCCR0_DIS (1 << 10) /* LCD Disable */
|
||||
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
|
||||
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
|
||||
#define LCCR0_PDD_S 12
|
||||
#define LCCR0_BM (1 << 20) /* Branch mask */
|
||||
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
|
||||
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
|
||||
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
|
||||
#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */
|
||||
#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */
|
||||
#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */
|
||||
|
||||
#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
|
||||
#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL))
|
||||
|
||||
#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
|
||||
#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW))
|
||||
|
||||
#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */
|
||||
#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW))
|
||||
|
||||
#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
|
||||
#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW))
|
||||
|
||||
#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
|
||||
#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP))
|
||||
|
||||
#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */
|
||||
#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW))
|
||||
|
||||
#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
|
||||
#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW))
|
||||
|
||||
#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
|
||||
#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW))
|
||||
|
||||
#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
|
||||
#define LCCR3_API_S 16
|
||||
#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
|
||||
#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
|
||||
#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */
|
||||
#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
|
||||
#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
|
||||
|
||||
#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */
|
||||
#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
|
||||
#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
|
||||
|
||||
#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
|
||||
#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
|
||||
#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD)))
|
||||
|
||||
#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
|
||||
#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP)))
|
||||
|
||||
#define LCCR3_ACB Fld (8, 8) /* AC Bias */
|
||||
#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB)))
|
||||
|
||||
#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */
|
||||
#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */
|
||||
|
||||
#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */
|
||||
#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */
|
||||
|
||||
#define LCSR_LDD (1 << 0) /* LCD Disable Done */
|
||||
#define LCSR_SOF (1 << 1) /* Start of frame */
|
||||
#define LCSR_BER (1 << 2) /* Bus error */
|
||||
#define LCSR_ABC (1 << 3) /* AC Bias count */
|
||||
#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
|
||||
#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
|
||||
#define LCSR_OU (1 << 6) /* output FIFO underrun */
|
||||
#define LCSR_QD (1 << 7) /* quick disable */
|
||||
#define LCSR_EOF (1 << 8) /* end of frame */
|
||||
#define LCSR_BS (1 << 9) /* branch status */
|
||||
#define LCSR_SINT (1 << 10) /* subsequent interrupt */
|
||||
|
||||
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
|
||||
|
||||
#endif /* __ASM_ARCH_REGS_LCD_H */
|
||||
Loading…
Reference in New Issue