Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock
  68360serial: Plumb in rs_360_get_icount()
  n_gsm: copy mtu over when configuring via ioctl interface
  virtio: console: Move file back to drivers/char/

arch/blackfin/include/asm/bfin_serial.h

@@ -10,6 +10,7 @@
 #define __BFIN_ASM_SERIAL_H__
 
 #include <linux/serial_core.h>
+#include <linux/spinlock.h>
 #include <mach/anomaly.h>
 #include <mach/bfin_serial.h>
 
@@ -41,6 +42,7 @@ struct bfin_serial_port {
 	struct circ_buf rx_dma_buf;
 	struct timer_list rx_dma_timer;
 	int rx_dma_nrows;
+	spinlock_t rx_lock;
 	unsigned int tx_dma_channel;
 	unsigned int rx_dma_channel;
 	struct work_struct tx_dma_workqueue;

drivers/char/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
+obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o

drivers/char/virtio_console.c

@@ -32,7 +32,7 @@
 #include <linux/virtio_console.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
-#include "hvc_console.h"
+#include "../tty/hvc/hvc_console.h"
 
 /*
  * This is a global struct for storing common data for all the devices

drivers/tty/hvc/Makefile

@@ -10,4 +10,3 @@ obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
 obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
-obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o

drivers/tty/n_gsm.c

@@ -2414,6 +2414,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
 
 	gsm->initiator = c->initiator;
 	gsm->mru = c->mru;
+	gsm->mtu = c->mtu;
 	gsm->encoding = c->encapsulation;
 	gsm->adaption = c->adaption;
 	gsm->n2 = c->n2;

drivers/tty/serial/68360serial.c

@@ -2428,6 +2428,7 @@ static const struct tty_operations rs_360_ops = {
 	/* .read_proc = rs_360_read_proc, */
 	.tiocmget = rs_360_tiocmget,
 	.tiocmset = rs_360_tiocmset,
+	.get_icount = rs_360_get_icount,
 };
 
 static int __init rs_360_init(void)

drivers/tty/serial/bfin_5xx.c

@@ -370,10 +370,8 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 
-	spin_lock(&uart->port.lock);
 	while (UART_GET_LSR(uart) & DR)
 		bfin_serial_rx_chars(uart);
-	spin_unlock(&uart->port.lock);
 
 	return IRQ_HANDLED;
 }
@@ -490,9 +488,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
 	int x_pos, pos;
 
-	dma_disable_irq(uart->tx_dma_channel);
-	dma_disable_irq(uart->rx_dma_channel);
-	spin_lock_bh(&uart->port.lock);
+	dma_disable_irq_nosync(uart->rx_dma_channel);
+	spin_lock_bh(&uart->rx_lock);
 
 	/* 2D DMA RX buffer ring is used. Because curr_y_count and
 	 * curr_x_count can't be read as an atomic operation,
@@ -523,8 +520,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock_bh(&uart->port.lock);
-	dma_enable_irq(uart->tx_dma_channel);
+	spin_unlock_bh(&uart->rx_lock);
 	dma_enable_irq(uart->rx_dma_channel);
 
 	mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
@@ -571,7 +567,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 	unsigned short irqstat;
 	int x_pos, pos;
 
-	spin_lock(&uart->port.lock);
+	spin_lock(&uart->rx_lock);
 	irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
 	clear_dma_irqstat(uart->rx_dma_channel);
 
@@ -589,7 +585,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock(&uart->port.lock);
+	spin_unlock(&uart->rx_lock);
 
 	return IRQ_HANDLED;
 }
@@ -1332,6 +1328,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
 		}
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
+		spin_lock_init(&uart->rx_lock);
 		uart->tx_done	    = 1;
 		uart->tx_count	    = 0;