mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-28 05:12:49 +00:00
regulator: dt-bindings: Drop unneeded quotes
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230317233616.3968003-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
691c1fcda5
commit
cff5c89513
36 changed files with 97 additions and 97 deletions
|
@ -10,7 +10,7 @@ maintainers:
|
|||
- Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
@ -19,43 +19,43 @@ properties:
|
|||
regulator-name: true
|
||||
|
||||
anatop-reg-offset:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the anatop MFD register offset.
|
||||
|
||||
anatop-vol-bit-shift:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the bit shift for the register.
|
||||
|
||||
anatop-vol-bit-width:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the number of bits used in the register.
|
||||
|
||||
anatop-min-bit-val:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the minimum value of this register.
|
||||
|
||||
anatop-min-voltage:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the minimum voltage of this regulator.
|
||||
|
||||
anatop-max-voltage:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the maximum voltage of this regulator.
|
||||
|
||||
anatop-delay-reg-offset:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the anatop MFD step time register offset.
|
||||
|
||||
anatop-delay-bit-shift:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the bit shift for the step time register.
|
||||
|
||||
anatop-delay-bit-width:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing the number of bits used in the step time register.
|
||||
|
||||
anatop-enable-bit:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: u32 value representing regulator enable bit offset.
|
||||
|
||||
vin-supply:
|
||||
|
|
|
@ -109,7 +109,7 @@ properties:
|
|||
description: Specify a valid GPIO for platform control of the regulator
|
||||
|
||||
dlg,ripple-cancel:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [ 0, 1, 2, 3 ]
|
||||
description: |
|
||||
Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
|
||||
|
|
|
@ -17,7 +17,7 @@ description:
|
|||
to be the same.
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -14,7 +14,7 @@ description:
|
|||
regulator.yaml, can also be used.
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -15,7 +15,7 @@ description:
|
|||
regulator.txt, can also be used.
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -25,7 +25,7 @@ properties:
|
|||
|
||||
patternProperties:
|
||||
"^regulator-(ldo|sbb[0-2])$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
|
|
|
@ -25,7 +25,7 @@ properties:
|
|||
|
||||
patternProperties:
|
||||
"^regulator-.+$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
additionalProperties: false
|
||||
|
|
|
@ -25,7 +25,7 @@ properties:
|
|||
|
||||
patternProperties:
|
||||
"^(ldo[1-5]|buck)$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
|
|
|
@ -18,7 +18,7 @@ description: |
|
|||
patternProperties:
|
||||
"^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -28,7 +28,7 @@ patternProperties:
|
|||
|
||||
"^ldo-v(avdd32aud|auxa32)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -38,7 +38,7 @@ patternProperties:
|
|||
|
||||
"^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -48,7 +48,7 @@ patternProperties:
|
|||
|
||||
"^ldo-vcam(a|af|d|io)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -58,7 +58,7 @@ patternProperties:
|
|||
|
||||
"^ldo-vtcxo[12]$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -71,7 +71,7 @@ patternProperties:
|
|||
|
||||
"^ldo-vgp[1234]$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
|
|
@ -18,7 +18,7 @@ description: |
|
|||
patternProperties:
|
||||
"^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -28,7 +28,7 @@ patternProperties:
|
|||
|
||||
"^ldo-v(bif28|dig18|sram|usb33)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
|
|
@ -28,11 +28,11 @@ properties:
|
|||
|
||||
patternProperties:
|
||||
"^buck[1-4]$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
"^ldo[1-4]$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
additionalProperties: false
|
||||
|
|
|
@ -28,7 +28,7 @@ properties:
|
|||
mps,fb-voltage-divider:
|
||||
description: An array of two integers containing the resistor
|
||||
values R1 and R2 of the feedback voltage divider in kilo ohms.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32-array"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
maxItems: 2
|
||||
|
||||
mps,switch-frequency-hz:
|
||||
|
|
|
@ -29,7 +29,7 @@ properties:
|
|||
|
||||
properties:
|
||||
mps,switch-freq:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint8"
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 2
|
||||
description: |
|
||||
|
@ -51,14 +51,14 @@ properties:
|
|||
|
||||
properties:
|
||||
mps,buck-softstart:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint8"
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1, 2, 3]
|
||||
description: |
|
||||
defines the soft start time of this buck, must be one of the following
|
||||
corresponding values 150us, 300us, 610us, 920us
|
||||
|
||||
mps,buck-phase-delay:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint8"
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1, 2, 3]
|
||||
description: |
|
||||
defines the phase delay of this buck, must be one of the following
|
||||
|
|
|
@ -28,7 +28,7 @@ properties:
|
|||
patternProperties:
|
||||
"^vbuck[1-4]$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
|
|
|
@ -17,7 +17,7 @@ description: |
|
|||
patternProperties:
|
||||
"^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -27,7 +27,7 @@ patternProperties:
|
|||
|
||||
"^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -37,7 +37,7 @@ patternProperties:
|
|||
|
||||
"^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -47,7 +47,7 @@ patternProperties:
|
|||
|
||||
"^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -57,7 +57,7 @@ patternProperties:
|
|||
|
||||
"^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -67,7 +67,7 @@ patternProperties:
|
|||
|
||||
"^ldo_v(fe|bif|io)28$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -77,7 +77,7 @@ patternProperties:
|
|||
|
||||
"^ldo_v(aud|io|aux|rf|m)18$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
@ -87,7 +87,7 @@ patternProperties:
|
|||
|
||||
"^ldo_vsim[12]$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
|
|
|
@ -26,11 +26,11 @@ properties:
|
|||
|
||||
patternProperties:
|
||||
"^buck[12]$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
"^ldo[123567]$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
|
|
|
@ -57,7 +57,7 @@ properties:
|
|||
|
||||
properties:
|
||||
nxp,dvs-run-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 600000
|
||||
maximum: 2187500
|
||||
description:
|
||||
|
@ -65,7 +65,7 @@ properties:
|
|||
dvs(dynamic voltage scaling) property.
|
||||
|
||||
nxp,dvs-standby-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 600000
|
||||
maximum: 2187500
|
||||
description:
|
||||
|
|
|
@ -59,7 +59,7 @@ properties:
|
|||
should be "buck1", ..., "buck7"
|
||||
|
||||
nxp,ilim-ma:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 2100
|
||||
maximum: 4500
|
||||
deprecated: true
|
||||
|
@ -75,7 +75,7 @@ properties:
|
|||
4500
|
||||
|
||||
nxp,phase-shift:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 0
|
||||
enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
|
||||
description:
|
||||
|
|
|
@ -63,19 +63,19 @@ properties:
|
|||
|
||||
patternProperties:
|
||||
"^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
"^vgen[1-6]$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
"^vldo[1-4]$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
"^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
additionalProperties: false
|
||||
|
|
|
@ -105,18 +105,18 @@ properties:
|
|||
|
||||
bob:
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
description: BOB regulator node.
|
||||
dependencies:
|
||||
regulator-allow-set-load: ["regulator-allowed-modes"]
|
||||
regulator-allow-set-load: [ regulator-allowed-modes ]
|
||||
|
||||
patternProperties:
|
||||
"^(smps|ldo|lvs|bob)[0-9]+$":
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
description: smps/ldo regulator nodes(s).
|
||||
dependencies:
|
||||
regulator-allow-set-load: ["regulator-allowed-modes"]
|
||||
regulator-allow-set-load: [ regulator-allowed-modes ]
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
@ -15,7 +15,7 @@ description: |
|
|||
and control the backlight.
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -13,7 +13,7 @@ maintainers:
|
|||
properties:
|
||||
regulator-name:
|
||||
description: A string used as a descriptive name for regulator outputs
|
||||
$ref: "/schemas/types.yaml#/definitions/string"
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
|
||||
regulator-min-microvolt:
|
||||
description: smallest voltage consumers may set
|
||||
|
@ -23,7 +23,7 @@ properties:
|
|||
|
||||
regulator-microvolt-offset:
|
||||
description: Offset applied to voltages to compensate for voltage drops
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
regulator-min-microamp:
|
||||
description: smallest current consumers may set
|
||||
|
@ -59,7 +59,7 @@ properties:
|
|||
description: ramp delay for regulator(in uV/us) For hardware which supports
|
||||
disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
|
||||
= <0>) for disabling ramp delay.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
regulator-enable-ramp-delay:
|
||||
description: The time taken, in microseconds, for the supply rail to
|
||||
|
@ -68,7 +68,7 @@ properties:
|
|||
required due to the combination of internal ramping of the regulator
|
||||
itself, and board design issues such as trace capacitance and load
|
||||
on the supply.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
regulator-settling-time-us:
|
||||
description: Settling time, in microseconds, for voltage change if regulator
|
||||
|
@ -95,7 +95,7 @@ properties:
|
|||
description: initial operating mode. The set of possible operating modes
|
||||
depends on the capabilities of every hardware so each device binding
|
||||
documentation explains which values the regulator supports.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
regulator-allowed-modes:
|
||||
description: list of operating modes that software is allowed to configure
|
||||
|
@ -103,12 +103,12 @@ properties:
|
|||
The set of possible operating modes depends on the capabilities of
|
||||
every hardware so each device binding document explains which values
|
||||
the regulator supports.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32-array"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
|
||||
regulator-system-load:
|
||||
description: Load in uA present on regulator that is not captured by
|
||||
any consumer request.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
regulator-pull-down:
|
||||
description: Enable pull down resistor when the regulator is disabled.
|
||||
|
@ -206,14 +206,14 @@ properties:
|
|||
0: Disable active discharge.
|
||||
1: Enable active discharge.
|
||||
Absence of this property will leave configuration to default.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1]
|
||||
|
||||
regulator-coupled-with:
|
||||
description: Regulators with which the regulator is coupled. The linkage
|
||||
is 2-way - all coupled regulators should be linked with each other.
|
||||
A regulator should not be coupled with its supplier.
|
||||
$ref: "/schemas/types.yaml#/definitions/phandle-array"
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
items:
|
||||
maxItems: 1
|
||||
|
||||
|
@ -221,7 +221,7 @@ properties:
|
|||
description: Array of maximum spread between voltages of coupled regulators
|
||||
in microvolts, each value in the array relates to the corresponding
|
||||
couple specified by the regulator-coupled-with property.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32-array"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
|
||||
regulator-max-step-microvolt:
|
||||
description: Maximum difference between current and target voltages
|
||||
|
@ -269,7 +269,7 @@ patternProperties:
|
|||
of possible operating modes depends on the capabilities of every
|
||||
hardware so the valid modes are documented on each regulator device
|
||||
tree binding document.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
|
|
|
@ -32,7 +32,7 @@ properties:
|
|||
maxItems: 1
|
||||
|
||||
richtek,oc-level-select:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint8"
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1, 2, 3]
|
||||
description: |
|
||||
Over current level selection. Each respective value means the current
|
||||
|
@ -40,7 +40,7 @@ properties:
|
|||
in chip default.
|
||||
|
||||
richtek,ot-level-select:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint8"
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1, 2]
|
||||
description: |
|
||||
Over temperature level selection. Each respective value means the degree
|
||||
|
@ -48,7 +48,7 @@ properties:
|
|||
default.
|
||||
|
||||
richtek,pgdly-time-select:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint8"
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1, 2, 3]
|
||||
description: |
|
||||
Power good signal delay time selection. Each respective value means the
|
||||
|
@ -57,7 +57,7 @@ properties:
|
|||
|
||||
|
||||
richtek,switch-freq-select:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint8"
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1, 2]
|
||||
description: |
|
||||
Buck switch frequency selection. Each respective value means 400KHz,
|
||||
|
|
|
@ -120,7 +120,7 @@ properties:
|
|||
lsw:
|
||||
description: load switch current regulator description.
|
||||
type: object
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
@ -56,7 +56,7 @@ patternProperties:
|
|||
PMIC "RUN" state voltage in uV when PMIC HW states are used. See
|
||||
comments below for bucks/LDOs which support this. 0 means
|
||||
regulator should be disabled at RUN state.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
@ -67,7 +67,7 @@ patternProperties:
|
|||
keeps regulator enabled. BD71815 does not change voltage level
|
||||
when PMIC transitions to SNVS.SNVS voltage depends on the previous
|
||||
state (from which the PMIC transitioned to SNVS).
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
@ -76,7 +76,7 @@ patternProperties:
|
|||
PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
|
||||
comments below for bucks/LDOs which support this. 0 means
|
||||
regulator should be disabled at SUSPEND state.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
@ -85,7 +85,7 @@ patternProperties:
|
|||
PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
|
||||
comments below for bucks/LDOs which support this. 0 means
|
||||
regulator should be disabled at LPSR state.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
|
|
@ -52,7 +52,7 @@ patternProperties:
|
|||
description:
|
||||
PMIC default "RUN" state voltage in uV. See below table for
|
||||
bucks which support this. 0 means disabled.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
@ -60,7 +60,7 @@ patternProperties:
|
|||
description:
|
||||
PMIC default "IDLE" state voltage in uV. See below table for
|
||||
bucks which support this. 0 means disabled.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
@ -68,7 +68,7 @@ patternProperties:
|
|||
description:
|
||||
PMIC default "SUSPEND" state voltage in uV. See below table for
|
||||
bucks which support this. 0 means disabled.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
@ -76,7 +76,7 @@ patternProperties:
|
|||
description:
|
||||
PMIC default "LPSR" state voltage in uV. See below table for
|
||||
bucks which support this. 0 means disabled.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 3300000
|
||||
|
||||
|
|
|
@ -55,7 +55,7 @@ patternProperties:
|
|||
should be "buck1", ..., "buck8"
|
||||
|
||||
rohm,dvs-run-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 1300000
|
||||
description:
|
||||
|
@ -63,7 +63,7 @@ patternProperties:
|
|||
bucks which support this. 0 means disabled.
|
||||
|
||||
rohm,dvs-idle-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 1300000
|
||||
description:
|
||||
|
@ -71,7 +71,7 @@ patternProperties:
|
|||
bucks which support this. 0 means disabled.
|
||||
|
||||
rohm,dvs-suspend-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 1300000
|
||||
description:
|
||||
|
|
|
@ -54,7 +54,7 @@ patternProperties:
|
|||
should be "buck1", ..., "buck6"
|
||||
|
||||
rohm,dvs-run-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 1300000
|
||||
description:
|
||||
|
@ -62,7 +62,7 @@ patternProperties:
|
|||
bucks which support this. 0 means disabled.
|
||||
|
||||
rohm,dvs-idle-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 1300000
|
||||
description:
|
||||
|
@ -70,7 +70,7 @@ patternProperties:
|
|||
bucks which support this. 0 means disabled.
|
||||
|
||||
rohm,dvs-suspend-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 1300000
|
||||
description:
|
||||
|
|
|
@ -25,7 +25,7 @@ patternProperties:
|
|||
type: object
|
||||
description:
|
||||
Properties for single regulator.
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
rohm,ocw-fet-ron-micro-ohms:
|
||||
|
|
|
@ -42,7 +42,7 @@ properties:
|
|||
reset-names: true
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -14,7 +14,7 @@ description: |
|
|||
to supply ADC analog input switches.
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
@ -23,7 +23,7 @@ properties:
|
|||
- st,stm32mp1-booster
|
||||
|
||||
st,syscfg:
|
||||
$ref: "/schemas/types.yaml#/definitions/phandle"
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: phandle to system configuration controller.
|
||||
|
||||
vdda-supply:
|
||||
|
|
|
@ -15,7 +15,7 @@ maintainers:
|
|||
- Fabrice Gasnier <fabrice.gasnier@foss.st.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -26,7 +26,7 @@ patternProperties:
|
|||
"^(reg11|reg18|usb33)$":
|
||||
type: object
|
||||
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
@ -19,7 +19,7 @@ description: |
|
|||
https://www.ti.com/lit/gpn/tps62360
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -15,7 +15,7 @@ description: |
|
|||
controller is also embedded.
|
||||
|
||||
allOf:
|
||||
- $ref: "regulator.yaml#"
|
||||
- $ref: regulator.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -21,19 +21,19 @@ properties:
|
|||
wlf,ldoena:
|
||||
description:
|
||||
GPIO specifier for the GPIO controlling LDOENA.
|
||||
$ref: "/schemas/types.yaml#/definitions/phandle-array"
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
maxItems: 1
|
||||
|
||||
ldo1:
|
||||
description:
|
||||
Initial data for the LDO1 regulator.
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
micvdd:
|
||||
description:
|
||||
Initial data for the MICVDD regulator.
|
||||
$ref: "regulator.yaml#"
|
||||
$ref: regulator.yaml#
|
||||
type: object
|
||||
|
||||
additionalProperties: true
|
||||
|
|
Loading…
Reference in a new issue