diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index 63fd4e6a014b..ef41f77cb979 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -289,7 +289,7 @@ 152 = /dev/kpoll Kernel Poll Driver 153 = /dev/mergemem Memory merge device 154 = /dev/pmu Macintosh PowerBook power manager - 155 = /dev/isictl MultiTech ISICom serial control + 155 = 156 = /dev/lcd Front panel LCD display 157 = /dev/ac Applicom Intl Profibus card 158 = /dev/nwbutton Netwinder external button @@ -477,11 +477,6 @@ 18 block Sanyo CD-ROM 0 = /dev/sjcd Sanyo CD-ROM - 19 char Cyclades serial card - 0 = /dev/ttyC0 First Cyclades port - ... - 31 = /dev/ttyC31 32nd Cyclades port - 19 block "Double" compressed disk 0 = /dev/double0 First compressed disk ... @@ -493,11 +488,6 @@ See the Double documentation for the meaning of the mirror devices. - 20 char Cyclades serial card - alternate devices - 0 = /dev/cub0 Callout device for ttyC0 - ... - 31 = /dev/cub31 Callout device for ttyC31 - 20 block Hitachi CD-ROM (under development) 0 = /dev/hitcd Hitachi CD-ROM diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index f54cae9ff7b2..f0506a917793 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -12,8 +12,13 @@ maintainers: allOf: - $ref: /schemas/serial.yaml# - if: - required: - - aspeed,sirq-polarity-sense + anyOf: + - required: + - aspeed,lpc-io-reg + - required: + - aspeed,lpc-interrupts + - required: + - aspeed,sirq-polarity-sense then: properties: compatible: @@ -55,6 +60,7 @@ properties: - const: aspeed,ast2500-vuart - const: intel,xscale-uart - const: mrvl,pxa-uart + - const: nuvoton,wpcm450-uart - const: nuvoton,npcm750-uart - const: nvidia,tegra20-uart - const: nxp,lpc3220-uart @@ -165,7 +171,6 @@ properties: property. tx-threshold: - $ref: /schemas/types.yaml#/definitions/uint32 description: | Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. @@ -188,6 +193,21 @@ properties: offset and bit number to identify how the SIRQ polarity should be configured. One possible data source is the LPC/eSPI mode bit. Only applicable to aspeed,ast2500-vuart. + deprecated: true + + aspeed,lpc-io-reg: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + The VUART LPC address. Only applicable to aspeed,ast2500-vuart. + + aspeed,lpc-interrupts: + $ref: "/schemas/types.yaml#/definitions/uint32-array" + minItems: 2 + maxItems: 2 + description: | + A 2-cell property describing the VUART SIRQ number and SIRQ + polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only + applicable to aspeed,ast2500-vuart. required: - reg @@ -220,6 +240,7 @@ examples: }; - | #include + #include serial@1e787000 { compatible = "aspeed,ast2500-vuart"; reg = <0x1e787000 0x40>; @@ -227,7 +248,8 @@ examples: interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; - aspeed,sirq-polarity-sense = <&syscon 0x70 25>; + aspeed,lpc-io-reg = <0x3f8>; + aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; ... diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml new file mode 100644 index 000000000000..46c62745f901 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/brcm,bcm7271-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom 8250 based serial port devicetree bindings + +maintainers: + - Al Cooper + +allOf: + - $ref: /schemas/serial.yaml# + +description: |+ + The Broadcom UART is based on the basic 8250 UART but with + enhancements for more accurate high speed baud rates and support + for DMA. + +properties: + compatible: + items: + - enum: + - brcm,bcm7271-uart + - brcm,bcm7278-uart + + reg: + minItems: 1 + maxItems: 5 + + reg-names: + description: The UART register block and optionally the DMA register blocks. + oneOf: + - items: + - const: uart + - items: + - const: uart + - const: dma_arb + - const: dma_rx + - const: dma_tx + - const: dma_intr2 + + clocks: + minItems: 1 + + clock-names: + const: sw_baud + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + description: The UART interrupt and optionally the DMA interrupt. + minItems: 1 + items: + - const: uart + - const: dma + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + serial@840d000 { + compatible = "brcm,bcm7271-uart"; + reg = <0x840d000 0x20>; + reg-names = "uart"; + interrupts = <0x0 0x62 0x4>; + interrupt-names = "uart"; + clocks = <&scmi_clk 190>; + clock-names = "sw_baud"; + }; + + serial@840e000 { + compatible = "brcm,bcm7271-uart"; + reg = <0x840e000 0x20>, + <0x840e080 0x8>, + <0x840e100 0xa8>, + <0x840e200 0x4c>, + <0x840e300 0x30>; + reg-names = "uart", "dma_arb", "dma_rx", "dma_tx", "dma_intr2"; + interrupts = <0x0 0x62 0x4>, <0x0 0x75 0x4>; + interrupt-names = "uart", "dma"; + clocks = <&scmi_clk 190>; + clock-names = "sw_baud"; + }; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 647b5aee86f3..64c4fb59acd1 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -20,6 +20,7 @@ Required properties: * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS + * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS * "mediatek,mt8516-uart" for MT8516 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 21ee627b2ced..97ec8a093bf3 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/serial/samsung_uart.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Samsung S3C, S5P and Exynos SoC UART Controller +title: Samsung S3C, S5P, Exynos, and S5L (Apple SoC) SoC UART Controller maintainers: - Krzysztof Kozlowski @@ -19,6 +19,7 @@ properties: compatible: items: - enum: + - apple,s5l-uart - samsung,s3c2410-uart - samsung,s3c2412-uart - samsung,s3c2440-uart @@ -51,6 +52,16 @@ properties: - pattern: '^clk_uart_baud[0-3]$' - pattern: '^clk_uart_baud[0-3]$' + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + interrupts: description: RX interrupt and optionally TX interrupt. minItems: 1 @@ -68,9 +79,11 @@ required: - interrupts - reg -additionalProperties: false +unevaluatedProperties: false allOf: + - $ref: /schemas/serial.yaml# + - if: properties: compatible: @@ -96,6 +109,7 @@ allOf: compatible: contains: enum: + - apple,s5l-uart - samsung,exynos4210-uart then: properties: diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 65e75d040521..f368d58e8086 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -75,6 +75,16 @@ properties: type: boolean description: CTS and RTS pins are swapped. + rx-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + RX FIFO threshold configuration (in bytes). + + tx-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + TX FIFO threshold configuration (in bytes). + if: required: - uart-has-rtscts diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 8631678283f9..71a6426bc558 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -9,9 +9,6 @@ maintainers: title: STMicroelectronics STM32 USART bindings -allOf: - - $ref: rs485.yaml - properties: compatible: enum: @@ -40,6 +37,8 @@ properties: uart-has-rtscts: true + rx-tx-swap: true + dmas: minItems: 1 maxItems: 2 @@ -66,13 +65,46 @@ properties: linux,rs485-enabled-at-boot-time: true rs485-rx-during-tx: true -if: - required: - - st,hw-flow-ctrl -then: - properties: - cts-gpios: false - rts-gpios: false + rx-threshold: + description: + If value is set to 1, RX FIFO threshold is disabled. + enum: [1, 2, 4, 8, 12, 14, 16] + default: 8 + + tx-threshold: + description: + If value is set to 1, TX FIFO threshold is disabled. + enum: [1, 2, 4, 8, 12, 14, 16] + default: 8 + +allOf: + - $ref: rs485.yaml# + - $ref: serial.yaml# + - if: + required: + - st,hw-flow-ctrl + then: + properties: + cts-gpios: false + rts-gpios: false + - if: + properties: + compatible: + const: st,stm32-uart + then: + properties: + rx-tx-swap: false + - if: + properties: + compatible: + contains: + enum: + - st,stm32-uart + - st,stm32f7-uart + then: + properties: + rx-threshold: false + tx-threshold: false required: - compatible @@ -80,19 +112,22 @@ required: - interrupts - clocks -additionalProperties: false +additionalProperties: + type: object examples: - | #include usart1: serial@40011000 { - compatible = "st,stm32-uart"; + compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&rcc 0 164>; dmas = <&dma2 2 4 0x414 0x0>, <&dma2 7 4 0x414 0x0>; dma-names = "rx", "tx"; + rx-threshold = <4>; + tx-threshold = <4>; rs485-rts-active-low; }; diff --git a/Documentation/driver-api/serial/cyclades_z.rst b/Documentation/driver-api/serial/cyclades_z.rst deleted file mode 100644 index 532ff67e2f1c..000000000000 --- a/Documentation/driver-api/serial/cyclades_z.rst +++ /dev/null @@ -1,11 +0,0 @@ -================ -Cyclades-Z notes -================ - -The Cyclades-Z must have firmware loaded onto the card before it will -operate. This operation should be performed during system startup, - -The firmware, loader program and the latest device driver code are -available from Cyclades at - - ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ diff --git a/Documentation/driver-api/serial/index.rst b/Documentation/driver-api/serial/index.rst index 33ad10d05b26..21351b8c95a4 100644 --- a/Documentation/driver-api/serial/index.rst +++ b/Documentation/driver-api/serial/index.rst @@ -17,7 +17,6 @@ Serial drivers .. toctree:: :maxdepth: 1 - cyclades_z moxa-smartio n_gsm rocket diff --git a/Documentation/driver-api/serial/rocket.rst b/Documentation/driver-api/serial/rocket.rst deleted file mode 100644 index 23761eae4282..000000000000 --- a/Documentation/driver-api/serial/rocket.rst +++ /dev/null @@ -1,185 +0,0 @@ -================================================ -Comtrol(tm) RocketPort(R)/RocketModem(TM) Series -================================================ - -Device Driver for the Linux Operating System -============================================ - -Product overview ----------------- - -This driver provides a loadable kernel driver for the Comtrol RocketPort -and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 -high-speed serial ports or modems. This driver supports up to a combination -of four RocketPort or RocketModems boards in one machine simultaneously. -This file assumes that you are using the RocketPort driver which is -integrated into the kernel sources. - -The driver can also be installed as an external module using the usual -"make;make install" routine. This external module driver, obtainable -from the Comtrol website listed below, is useful for updating the driver -or installing it into kernels which do not have the driver configured -into them. Installations instructions for the external module -are in the included README and HW_INSTALL files. - -RocketPort ISA and RocketModem II PCI boards currently are only supported by -this driver in module form. - -The RocketPort ISA board requires I/O ports to be configured by the DIP -switches on the board. See the section "ISA Rocketport Boards" below for -information on how to set the DIP switches. - -You pass the I/O port to the driver using the following module parameters: - -board1: - I/O port for the first ISA board -board2: - I/O port for the second ISA board -board3: - I/O port for the third ISA board -board4: - I/O port for the fourth ISA board - -There is a set of utilities and scripts provided with the external driver -(downloadable from http://www.comtrol.com) that ease the configuration and -setup of the ISA cards. - -The RocketModem II PCI boards require firmware to be loaded into the card -before it will function. The driver has only been tested as a module for this -board. - -Installation Procedures ------------------------ - -RocketPort/RocketModem PCI cards require no driver configuration, they are -automatically detected and configured. - -The RocketPort driver can be installed as a module (recommended) or built -into the kernel. This is selected, as for other drivers, through the `make config` -command from the root of the Linux source tree during the kernel build process. - -The RocketPort/RocketModem serial ports installed by this driver are assigned -device major number 46, and will be named /dev/ttyRx, where x is the port number -starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards -installed in the system, the mapping of port names to serial ports is displayed -in the system log at /var/log/messages. - -If installed as a module, the module must be loaded. This can be done -manually by entering "modprobe rocket". To have the module loaded automatically -upon system boot, edit a `/etc/modprobe.d/*.conf` file and add the line -"alias char-major-46 rocket". - -In order to use the ports, their device names (nodes) must be created with mknod. -This is only required once, the system will retain the names once created. To -create the RocketPort/RocketModem device names, use the command -"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. - -For example:: - - > mknod /dev/ttyR0 c 46 0 - > mknod /dev/ttyR1 c 46 1 - > mknod /dev/ttyR2 c 46 2 - -The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) -for you:: - - >/dev/MAKEDEV ttyR - -ISA Rocketport Boards ---------------------- - -You must assign and configure the I/O addresses used by the ISA Rocketport -card before installing and using it. This is done by setting a set of DIP -switches on the Rocketport board. - - -Setting the I/O address ------------------------ - -Before installing RocketPort(R) or RocketPort RA boards, you must find -a range of I/O addresses for it to use. The first RocketPort card -requires a 68-byte contiguous block of I/O addresses, starting at one -of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, -0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP -switches of *all* of the Rocketport cards. - -The second, third, and fourth RocketPort cards require a 64-byte -contiguous block of I/O addresses, starting at one of the following -I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, -0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the -second, third, and fourth Rocketport cards (if present) are set via -software control. The DIP switch settings for the I/O address must be -set to the value of the first Rocketport cards. - -In order to distinguish each of the card from the others, each card -must have a unique board ID set on the dip switches. The first -Rocketport board must be set with the DIP switches corresponding to -the first board, the second board must be set with the DIP switches -corresponding to the second board, etc. IMPORTANT: The board ID is -the only place where the DIP switch settings should differ between the -various Rocketport boards in a system. - -The I/O address range used by any of the RocketPort cards must not -conflict with any other cards in the system, including other -RocketPort cards. Below, you will find a list of commonly used I/O -address ranges which may be in use by other devices in your system. -On a Linux system, "cat /proc/ioports" will also be helpful in -identifying what I/O addresses are being used by devices on your -system. - -Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it -for 0x100, it will occupy 0x100 to 0x143. This would mean that you -CAN NOT set the second, third or fourth board for address 0x140 since -the first 4 bytes of that range are used by the first board. You would -need to set the second, third, or fourth board to one of the next available -blocks such as 0x180. - -RocketPort and RocketPort RA SW1 Settings:: - - +-------------------------------+ - | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | - +-------+-------+---------------+ - | Unused| Card | I/O Port Block| - +-------------------------------+ - - DIP Switches DIP Switches - 7 8 6 5 - =================== =================== - On On UNUSED, MUST BE ON. On On First Card <==== Default - On Off Second Card - Off On Third Card - Off Off Fourth Card - - DIP Switches I/O Address Range - 4 3 2 1 Used by the First Card - ===================================== - On Off On Off 100-143 - On Off Off On 140-183 - On Off Off Off 180-1C3 <==== Default - Off On On Off 200-243 - Off On Off On 240-283 - Off On Off Off 280-2C3 - Off Off On Off 300-343 - Off Off Off On 340-383 - Off Off Off Off 380-3C3 - -Reporting Bugs --------------- - -For technical support, please provide the following -information: Driver version, kernel release, distribution of -kernel, and type of board you are using. Error messages and log -printouts port configuration details are especially helpful. - -USA: - :Phone: (612) 494-4100 - :FAX: (612) 494-4199 - :email: support@comtrol.com - -Comtrol Europe: - :Phone: +44 (0) 1 869 323-220 - :FAX: +44 (0) 1 869 323-211 - :email: support@comtrol.co.uk - -Web: http://www.comtrol.com -FTP: ftp.comtrol.com diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst index fa5a62f4150c..f5ba36e96461 100644 --- a/Documentation/process/magic-number.rst +++ b/Documentation/process/magic-number.rst @@ -73,12 +73,10 @@ CMAGIC 0x0111 user ``include/linux/ MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` -CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h`` DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c`` -ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h`` PTY_MAGIC 0x5001 ``drivers/char/pty.c`` PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h`` SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h`` @@ -90,14 +88,12 @@ TTY_MAGIC 0x5401 tty_struct ``include/linux/ MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` -TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h`` USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c`` RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c`` USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h`` CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h`` -RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h`` LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c`` RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c`` NBD_REQUEST_MAGIC 0x12560953 nbd_request ``include/linux/nbd.h`` diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst index 1af30f4228f2..e8c782d155a3 100644 --- a/Documentation/translations/it_IT/process/magic-number.rst +++ b/Documentation/translations/it_IT/process/magic-number.rst @@ -79,12 +79,10 @@ CMAGIC 0x0111 user ``include/linux/ MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` -CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h`` DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c`` -ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h`` PTY_MAGIC 0x5001 ``drivers/char/pty.c`` PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h`` SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h`` @@ -96,14 +94,12 @@ TTY_MAGIC 0x5401 tty_struct ``include/linux/ MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` -TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h`` USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c`` RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c`` USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h`` CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h`` -RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h`` LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c`` GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str ``drivers/scsi/gdth_ioctl.h`` RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c`` diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst index 7bb9d4165ed3..42f0635ca70a 100644 --- a/Documentation/translations/zh_CN/process/magic-number.rst +++ b/Documentation/translations/zh_CN/process/magic-number.rst @@ -62,12 +62,10 @@ CMAGIC 0x0111 user ``include/linux/ MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` -CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h`` DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c`` -ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h`` PTY_MAGIC 0x5001 ``drivers/char/pty.c`` PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h`` SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h`` @@ -79,14 +77,12 @@ TTY_MAGIC 0x5401 tty_struct ``include/linux/ MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` -TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h`` USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c`` RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c`` USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h`` CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h`` -RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h`` LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c`` GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str ``drivers/scsi/gdth_ioctl.h`` RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c`` diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 5618a39456df..181211beb01d 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -209,7 +209,6 @@ Code Seq# Include File Comments linux/fs.h, 'X' all fs/ocfs2/ocfs_fs.h conflict! 'X' 01 linux/pktcdvd.h conflict! -'Y' all linux/cyclades.h 'Z' 14-15 drivers/message/fusion/mptctl.h '[' 00-3F linux/usb/tmc.h USB Test and Measurement Devices diff --git a/MAINTAINERS b/MAINTAINERS index 1d08d7a76470..0504a13a8087 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3578,6 +3578,14 @@ S: Supported F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml F: drivers/i2c/busses/i2c-brcmstb.c +BROADCOM BRCMSTB UART DRIVER +M: Al Cooper +L: linux-serial@vger.kernel.org +L: bcm-kernel-feedback-list@broadcom.com +S: Maintained +F: Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml +F: drivers/tty/serial/8250/8250_bcm7271.c + BROADCOM BRCMSTB USB EHCI DRIVER M: Al Cooper L: linux-usb@vger.kernel.org @@ -4902,16 +4910,8 @@ S: Maintained W: http://www.armlinux.org.uk/ F: drivers/video/fbdev/cyber2000fb.* -CYCLADES ASYNC MUX DRIVER -S: Orphan -W: http://www.cyclades.com/ -F: drivers/tty/cyclades.c -F: include/linux/cyclades.h -F: include/uapi/linux/cyclades.h - CYCLADES PC300 DRIVER S: Orphan -W: http://www.cyclades.com/ F: drivers/net/wan/pc300* CYPRESS_FIRMWARE MEDIA DRIVER @@ -12167,8 +12167,7 @@ F: drivers/media/pci/meye/ F: include/uapi/linux/meye.h MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD -M: Jiri Slaby -S: Maintained +S: Orphan F: Documentation/driver-api/serial/moxa-smartio.rst F: drivers/tty/mxser.* @@ -12312,11 +12311,6 @@ F: drivers/mux/ F: include/dt-bindings/mux/ F: include/linux/mux/ -MULTITECH MULTIPORT CARD (ISICOM) -S: Orphan -F: drivers/tty/isicom.c -F: include/linux/isicom.h - MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER M: Bin Liu L: linux-usb@vger.kernel.org @@ -15493,12 +15487,6 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/rocker/ -ROCKETPORT DRIVER -S: Maintained -W: http://www.comtrol.com -F: Documentation/driver-api/serial/rocket.rst -F: drivers/tty/rocket* - ROCKETPORT EXPRESS/INFINITY DRIVER M: Kevin Cernekee L: linux-serial@vger.kernel.org diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 4b8031782555..e242d7211059 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -452,32 +452,36 @@ usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; - interrupts = ; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART2_K>; + wakeup-source; status = "disabled"; }; usart3: serial@4000f000 { compatible = "st,stm32h7-uart"; reg = <0x4000f000 0x400>; - interrupts = ; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART3_K>; + wakeup-source; status = "disabled"; }; uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = ; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; + wakeup-source; status = "disabled"; }; uart5: serial@40011000 { compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; - interrupts = ; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART5_K>; + wakeup-source; status = "disabled"; }; @@ -577,16 +581,18 @@ uart7: serial@40018000 { compatible = "st,stm32h7-uart"; reg = <0x40018000 0x400>; - interrupts = ; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART7_K>; + wakeup-source; status = "disabled"; }; uart8: serial@40019000 { compatible = "st,stm32h7-uart"; reg = <0x40019000 0x400>; - interrupts = ; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART8_K>; + wakeup-source; status = "disabled"; }; @@ -665,8 +671,9 @@ usart6: serial@44003000 { compatible = "st,stm32h7-uart"; reg = <0x44003000 0x400>; - interrupts = ; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART6_K>; + wakeup-source; status = "disabled"; }; @@ -1505,8 +1512,9 @@ usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; - interrupts = ; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART1_K>; + wakeup-source; status = "disabled"; }; diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 6677ac0da45a..1fd9d1260f9e 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -595,7 +595,6 @@ CONFIG_GAMEPORT_FM801=m # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_NONSTANDARD=y CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m CONFIG_SYNCLINK_GT=m CONFIG_NOZOMI=m CONFIG_N_HDLC=m diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index af81a62faba6..a3dda25a4e45 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -31,48 +31,23 @@ #define SERIAL_MAX_NUM_LINES 1 #define SERIAL_TIMER_VALUE (HZ / 10) +static void rs_poll(struct timer_list *); + static struct tty_driver *serial_driver; static struct tty_port serial_port; -static struct timer_list serial_timer; - +static DEFINE_TIMER(serial_timer, rs_poll); static DEFINE_SPINLOCK(timer_lock); -static char *serial_version = "0.1"; -static char *serial_name = "ISS serial driver"; - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ - -static void rs_poll(struct timer_list *); - static int rs_open(struct tty_struct *tty, struct file * filp) { - tty->port = &serial_port; spin_lock_bh(&timer_lock); - if (tty->count == 1) { - timer_setup(&serial_timer, rs_poll, 0); + if (tty->count == 1) mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); - } spin_unlock_bh(&timer_lock); return 0; } - -/* - * ------------------------------------------------------------ - * iss_serial_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ static void rs_close(struct tty_struct *tty, struct file * filp) { spin_lock_bh(&timer_lock); @@ -149,7 +124,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) static int rs_proc_show(struct seq_file *m, void *v) { - seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + seq_printf(m, "serinfo:1.0 driver:0.1\n"); return 0; } @@ -166,14 +141,12 @@ static const struct tty_operations serial_ops = { .proc_show = rs_proc_show, }; -int __init rs_init(void) +static int __init rs_init(void) { tty_port_init(&serial_port); serial_driver = alloc_tty_driver(SERIAL_MAX_NUM_LINES); - pr_info("%s %s\n", serial_name, serial_version); - /* Initialize the tty_driver structure */ serial_driver->driver_name = "iss_serial"; @@ -198,11 +171,7 @@ int __init rs_init(void) static __exit void rs_exit(void) { - int error; - - if ((error = tty_unregister_driver(serial_driver))) - pr_err("ISS_SERIAL: failed to unregister serial driver (%d)\n", - error); + tty_unregister_driver(serial_driver); put_tty_driver(serial_driver); tty_port_destroy(&serial_port); } diff --git a/drivers/accessibility/speakup/spk_ttyio.c b/drivers/accessibility/speakup/spk_ttyio.c index 9af1d4c124d3..2e39fcf492d8 100644 --- a/drivers/accessibility/speakup/spk_ttyio.c +++ b/drivers/accessibility/speakup/spk_ttyio.c @@ -104,7 +104,6 @@ static int spk_ttyio_receive_buf2(struct tty_struct *tty, static struct tty_ldisc_ops spk_ttyio_ldisc_ops = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "speakup_ldisc", .open = spk_ttyio_ldisc_open, .close = spk_ttyio_ldisc_close, diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 637c5b8c2aa1..71a4ca505e09 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -821,7 +821,6 @@ static __poll_t hci_uart_tty_poll(struct tty_struct *tty, static struct tty_ldisc_ops hci_uart_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "n_hci", .open = hci_uart_tty_open, .close = hci_uart_tty_close, diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 2be8d9a8eec5..3287a7627ed0 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -530,8 +530,6 @@ static int mgslpc_probe(struct pcmcia_device *link) info->port.ops = &mgslpc_port_ops; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; init_waitqueue_head(&info->status_event_wait_q); init_waitqueue_head(&info->event_wait_q); spin_lock_init(&info->lock); diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index 6a0059e508e3..93f5d11c830b 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -158,12 +158,23 @@ static int tpk_ioctl(struct tty_struct *tty, return 0; } +/* + * TTY operations hangup function. + */ +static void tpk_hangup(struct tty_struct *tty) +{ + struct ttyprintk_port *tpkp = tty->driver_data; + + tty_port_hangup(&tpkp->port); +} + static const struct tty_operations ttyprintk_ops = { .open = tpk_open, .close = tpk_close, .write = tpk_write, .write_room = tpk_write_room, .ioctl = tpk_ioctl, + .hangup = tpk_hangup, }; static const struct tty_port_operations null_ops = { }; diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 5a0a5fc3d3ab..071844b58073 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -845,7 +845,6 @@ static void st_tty_flush_buffer(struct tty_struct *tty) } static struct tty_ldisc_ops st_ldisc_ops = { - .magic = TTY_LDISC_MAGIC, .name = "n_st", .open = st_tty_open, .close = st_tty_close, diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index 8215cd77301f..da6fffb4d5a8 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -382,7 +382,6 @@ static void ldisc_close(struct tty_struct *tty) /* The line discipline structure. */ static struct tty_ldisc_ops caif_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "n_caif", .open = ldisc_open, .close = ldisc_close, @@ -390,18 +389,6 @@ static struct tty_ldisc_ops caif_ldisc = { .write_wakeup = ldisc_tx_wakeup }; -static int register_ldisc(void) -{ - int result; - - result = tty_register_ldisc(N_CAIF, &caif_ldisc); - if (result < 0) { - pr_err("cannot register CAIF ldisc=%d err=%d\n", N_CAIF, - result); - return result; - } - return result; -} static const struct net_device_ops netdev_ops = { .ndo_open = caif_net_open, .ndo_stop = caif_net_close, @@ -444,7 +431,10 @@ static int __init caif_ser_init(void) { int ret; - ret = register_ldisc(); + ret = tty_register_ldisc(N_CAIF, &caif_ldisc); + if (ret < 0) + pr_err("cannot register CAIF ldisc=%d err=%d\n", N_CAIF, ret); + debugfsdir = debugfs_create_dir("caif_serial", NULL); return ret; } diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 30c8d53c9745..31ba6664503d 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -697,7 +697,6 @@ static int slcan_ioctl(struct tty_struct *tty, struct file *file, static struct tty_ldisc_ops slc_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "slcan", .open = slcan_open, .close = slcan_close, diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 9f5b5614a150..80f41945709f 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -744,7 +744,6 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file, static struct tty_ldisc_ops sp_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "6pack", .open = sixpack_open, .close = sixpack_close, diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 17be2bb2985c..65154224d5b8 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -933,7 +933,6 @@ out: static struct tty_ldisc_ops ax_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "mkiss", .open = mkiss_open, .close = mkiss_close, diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c index 2a91caa4f37b..8b41aa3fb64e 100644 --- a/drivers/net/ppp/ppp_async.c +++ b/drivers/net/ppp/ppp_async.c @@ -372,7 +372,6 @@ ppp_asynctty_wakeup(struct tty_struct *tty) static struct tty_ldisc_ops ppp_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "ppp", .open = ppp_asynctty_open, .close = ppp_asynctty_close, diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index d8890923a9e3..576b6a93bf23 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -365,7 +365,6 @@ ppp_sync_wakeup(struct tty_struct *tty) static struct tty_ldisc_ops ppp_sync_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "pppsync", .open = ppp_sync_open, .close = ppp_sync_close, diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index f81fb0b13a94..1ab124eba8eb 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -1263,7 +1263,6 @@ static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static struct tty_ldisc_ops sl_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "slip", .open = slip_open, .close = slip_close, diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c index 4fd0cbf7f931..bf26cc56b863 100644 --- a/drivers/pps/clients/pps-ldisc.c +++ b/drivers/pps/clients/pps-ldisc.c @@ -13,8 +13,6 @@ #include #include -#define PPS_TTY_MAGIC 0x0001 - static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status) { struct pps_device *pps; @@ -114,7 +112,6 @@ static int __init pps_tty_init(void) /* Init PPS_TTY data */ pps_ldisc_ops.owner = THIS_MODULE; - pps_ldisc_ops.magic = PPS_TTY_MAGIC; pps_ldisc_ops.name = "pps_tty"; pps_ldisc_ops.dcd_change = pps_tty_dcd_change; pps_ldisc_ops.open = pps_tty_open; diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 671efee612af..d26947d743bc 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -85,7 +85,6 @@ struct raw3215_info { int written; /* number of bytes in write requests */ struct raw3215_req *queued_read; /* pointer to queued read requests */ struct raw3215_req *queued_write;/* pointer to queued write requests */ - struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */ wait_queue_head_t empty_wait; /* wait queue for flushing */ struct timer_list timer; /* timer for delayed output */ int line_pos; /* position on the line (for tabs) */ @@ -329,21 +328,6 @@ static inline void raw3215_try_io(struct raw3215_info *raw) } } -/* - * Call tty_wakeup from tasklet context - */ -static void raw3215_wakeup(unsigned long data) -{ - struct raw3215_info *raw = (struct raw3215_info *) data; - struct tty_struct *tty; - - tty = tty_port_tty_get(&raw->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } -} - /* * Try to start the next IO and wake up processes waiting on the tty. */ @@ -352,7 +336,7 @@ static void raw3215_next_io(struct raw3215_info *raw, struct tty_struct *tty) raw3215_mk_write_req(raw); raw3215_try_io(raw); if (tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) - tasklet_schedule(&raw->tlet); + tty_wakeup(tty); } /* @@ -644,7 +628,6 @@ static struct raw3215_info *raw3215_alloc_info(void) timer_setup(&info->timer, raw3215_timeout, 0); init_waitqueue_head(&info->empty_wait); - tasklet_init(&info->tlet, raw3215_wakeup, (unsigned long)info); tty_port_init(&info->port); return info; @@ -928,15 +911,13 @@ static int tty3215_open(struct tty_struct *tty, struct file * filp) */ static void tty3215_close(struct tty_struct *tty, struct file * filp) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; - raw = (struct raw3215_info *) tty->driver_data; if (raw == NULL || tty->count > 1) return; tty->closing = 1; /* Shutdown the terminal */ raw3215_shutdown(raw); - tasklet_kill(&raw->tlet); tty->closing = 0; tty_port_tty_set(&raw->port, NULL); } @@ -946,9 +927,7 @@ static void tty3215_close(struct tty_struct *tty, struct file * filp) */ static int tty3215_write_room(struct tty_struct *tty) { - struct raw3215_info *raw; - - raw = (struct raw3215_info *) tty->driver_data; + struct raw3215_info *raw = tty->driver_data; /* Subtract TAB_STOP_SIZE to allow for a tab, 8 <<< 64K */ if ((RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE) >= 0) @@ -963,12 +942,9 @@ static int tty3215_write_room(struct tty_struct *tty) static int tty3215_write(struct tty_struct * tty, const unsigned char *buf, int count) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; int i, written; - if (!tty) - return 0; - raw = (struct raw3215_info *) tty->driver_data; written = count; while (count > 0) { for (i = 0; i < count; i++) @@ -991,12 +967,10 @@ static int tty3215_write(struct tty_struct * tty, */ static int tty3215_put_char(struct tty_struct *tty, unsigned char ch) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; - if (!tty) - return 0; - raw = (struct raw3215_info *) tty->driver_data; raw3215_putchar(raw, ch); + return 1; } @@ -1009,17 +983,15 @@ static void tty3215_flush_chars(struct tty_struct *tty) */ static int tty3215_chars_in_buffer(struct tty_struct *tty) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; - raw = (struct raw3215_info *) tty->driver_data; return raw->count; } static void tty3215_flush_buffer(struct tty_struct *tty) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; - raw = (struct raw3215_info *) tty->driver_data; raw3215_flush_buffer(raw); tty_wakeup(tty); } @@ -1029,9 +1001,8 @@ static void tty3215_flush_buffer(struct tty_struct *tty) */ static void tty3215_throttle(struct tty_struct * tty) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; - raw = (struct raw3215_info *) tty->driver_data; raw->flags |= RAW3215_THROTTLED; } @@ -1040,10 +1011,9 @@ static void tty3215_throttle(struct tty_struct * tty) */ static void tty3215_unthrottle(struct tty_struct * tty) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; unsigned long flags; - raw = (struct raw3215_info *) tty->driver_data; if (raw->flags & RAW3215_THROTTLED) { spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); raw->flags &= ~RAW3215_THROTTLED; @@ -1057,9 +1027,8 @@ static void tty3215_unthrottle(struct tty_struct * tty) */ static void tty3215_stop(struct tty_struct *tty) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; - raw = (struct raw3215_info *) tty->driver_data; raw->flags |= RAW3215_STOPPED; } @@ -1068,10 +1037,9 @@ static void tty3215_stop(struct tty_struct *tty) */ static void tty3215_start(struct tty_struct *tty) { - struct raw3215_info *raw; + struct raw3215_info *raw = tty->driver_data; unsigned long flags; - raw = (struct raw3215_info *) tty->driver_data; if (raw->flags & RAW3215_STOPPED) { spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); raw->flags &= ~RAW3215_STOPPED; diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index 2cc461b26897..1ee6382cafc4 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -1218,13 +1218,12 @@ static int get_serial_info(struct tty_struct *tty, struct fwtty_port *port = tty->driver_data; mutex_lock(&port->port.mutex); - ss->type = PORT_UNKNOWN; - ss->line = port->port.tty->index; - ss->flags = port->port.flags; - ss->xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN; + ss->line = port->index; ss->baud_base = 400000000; - ss->close_delay = port->port.close_delay; + ss->close_delay = jiffies_to_msecs(port->port.close_delay) / 10; + ss->closing_wait = 3000; mutex_unlock(&port->port.mutex); + return 0; } @@ -1232,20 +1231,20 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct fwtty_port *port = tty->driver_data; + unsigned int cdelay; - if (ss->irq != 0 || ss->port != 0 || ss->custom_divisor != 0 || - ss->baud_base != 400000000) - return -EPERM; + cdelay = msecs_to_jiffies(ss->close_delay * 10); mutex_lock(&port->port.mutex); if (!capable(CAP_SYS_ADMIN)) { - if (((ss->flags & ~ASYNC_USR_MASK) != + if (cdelay != port->port.close_delay || + ((ss->flags & ~ASYNC_USR_MASK) != (port->port.flags & ~ASYNC_USR_MASK))) { mutex_unlock(&port->port.mutex); return -EPERM; } } - port->port.close_delay = ss->close_delay * HZ / 100; + port->port.close_delay = cdelay; mutex_unlock(&port->port.mutex); return 0; diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c index 6e813693a766..0ccc8c24e754 100644 --- a/drivers/staging/gdm724x/gdm_tty.c +++ b/drivers/staging/gdm724x/gdm_tty.c @@ -188,7 +188,7 @@ static int gdm_tty_write_room(struct tty_struct *tty) struct gdm *gdm = tty->driver_data; if (!GDM_TTY_READY(gdm)) - return -ENODEV; + return 0; return WRITE_SIZE; } diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index 607378bfebb7..b1e63f7798b0 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -610,14 +610,13 @@ static int get_serial_info(struct tty_struct *tty, { struct gb_tty *gb_tty = tty->driver_data; - ss->type = PORT_16550A; ss->line = gb_tty->minor; - ss->xmit_fifo_size = 16; - ss->baud_base = 9600; - ss->close_delay = gb_tty->port.close_delay / 10; + ss->close_delay = jiffies_to_msecs(gb_tty->port.close_delay) / 10; ss->closing_wait = gb_tty->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : gb_tty->port.closing_wait / 10; + ASYNC_CLOSING_WAIT_NONE : + jiffies_to_msecs(gb_tty->port.closing_wait) / 10; + return 0; } @@ -629,17 +628,16 @@ static int set_serial_info(struct tty_struct *tty, unsigned int close_delay; int retval = 0; - close_delay = ss->close_delay * 10; + close_delay = msecs_to_jiffies(ss->close_delay * 10); closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : ss->closing_wait * 10; + ASYNC_CLOSING_WAIT_NONE : + msecs_to_jiffies(ss->closing_wait * 10); mutex_lock(&gb_tty->port.mutex); if (!capable(CAP_SYS_ADMIN)) { if ((close_delay != gb_tty->port.close_delay) || (closing_wait != gb_tty->port.closing_wait)) retval = -EPERM; - else - retval = -EOPNOTSUPP; } else { gb_tty->port.close_delay = close_delay; gb_tty->port.closing_wait = closing_wait; diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index e15cd6b5bb99..f6a7fd6d3bb6 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -181,7 +181,7 @@ config SERIAL_NONSTANDARD help Say Y here if you have any non-standard serial boards -- boards which aren't supported using the standard "dumb" serial driver. - This includes intelligent serial boards such as Cyclades, + This includes intelligent serial boards such as Digiboards, etc. These are usually used for systems that need many serial ports because they serve many terminals or dial-in connections. @@ -192,50 +192,6 @@ config SERIAL_NONSTANDARD Most people can say N here. -config ROCKETPORT - tristate "Comtrol RocketPort support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - help - This driver supports Comtrol RocketPort and RocketModem PCI boards. - These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or - modems. For information about the RocketPort/RocketModem boards - and this driver read . - - To compile this driver as a module, choose M here: the - module will be called rocket. - - If you want to compile this driver into the kernel, say Y here. If - you don't have a Comtrol RocketPort/RocketModem card installed, say N. - -config CYCLADES - tristate "Cyclades async mux support" - depends on SERIAL_NONSTANDARD && (PCI || ISA) - select FW_LOADER - help - This driver supports Cyclades Z and Y multiserial boards. - You would need something like this to connect more than two modems to - your Linux box, for instance in order to become a dial-in server. - - For information about the Cyclades-Z card, read - . - - To compile this driver as a module, choose M here: the - module will be called cyclades. - - If you haven't heard about it, it's safe to say N. - -config CYZ_INTR - bool "Cyclades-Z interrupt mode operation" - depends on CYCLADES && PCI - help - The Cyclades-Z family of multiport cards allows 2 (two) driver op - modes: polling and interrupt. In polling mode, the driver will check - the status of the Cyclades-Z ports every certain amount of time - (which is called polling cycle and is configurable). In interrupt - mode, it will use an interrupt line (IRQ) in order to check the - status of the Cyclades-Z ports. The default op mode is polling. If - unsure, say N. - config MOXA_INTELLIO tristate "Moxa Intellio support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) @@ -267,16 +223,6 @@ config SYNCLINK_GT synchronous and asynchronous serial adapters manufactured by Microgate Systems, Ltd. (www.microgate.com) -config ISI - tristate "Multi-Tech multiport card support" - depends on SERIAL_NONSTANDARD && PCI - select FW_LOADER - help - This is a driver for the Multi-Tech cards which provide several - serial ports. The driver is experimental and can currently only be - built as a module. The module will be called isicom. - If you want to do that, choose M here. - config N_HDLC tristate "HDLC line discipline support" depends on SERIAL_NONSTANDARD @@ -415,36 +361,6 @@ config NULL_TTY If unsure, say N. -config TRACE_ROUTER - tristate "Trace data router for MIPI P1149.7 cJTAG standard" - depends on TRACE_SINK - help - The trace router uses the Linux tty line discipline framework to - route trace data coming from a tty port (say UART for example) to - the trace sink line discipline driver and to another tty port (say - USB). This is part of a solution for the MIPI P1149.7, compact JTAG, - standard, which is for debugging mobile devices. The PTI driver in - drivers/misc/pti.c defines the majority of this MIPI solution. - - You should select this driver if the target kernel is meant for - a mobile device containing a modem. Then you will need to select - "Trace data sink for MIPI P1149.7 cJTAG standard" line discipline - driver. - -config TRACE_SINK - tristate "Trace data sink for MIPI P1149.7 cJTAG standard" - help - The trace sink uses the Linux line discipline framework to receive - trace data coming from the trace router line discipline driver - to a user-defined tty port target, like USB. - This is to provide a way to extract modem trace data on - devices that do not have a PTI HW module, or just need modem - trace data to come out of a different HW output port. - This is part of a solution for the P1149.7, compact JTAG, standard. - - If you select this option, you need to select - "Trace data router for MIPI P1149.7 cJTAG standard". - config VCC tristate "Sun Virtual Console Concentrator" depends on SUN_LDOMS diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 730de6bf048b..c7054f5117c3 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -18,13 +18,10 @@ obj-$(CONFIG_SERIAL_DEV_BUS) += serdev/ # tty drivers obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o -obj-$(CONFIG_CYCLADES) += cyclades.o -obj-$(CONFIG_ISI) += isicom.o obj-$(CONFIG_MOXA_INTELLIO) += moxa.o obj-$(CONFIG_MOXA_SMARTIO) += mxser.o obj-$(CONFIG_NOZOMI) += nozomi.o obj-$(CONFIG_NULL_TTY) += ttynull.o -obj-$(CONFIG_ROCKETPORT) += rocket.o obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 18b78ea110ef..ca48ce5a0862 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -937,15 +937,21 @@ static void rs_unthrottle(struct tty_struct * tty) static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct serial_state *state = tty->driver_data; + unsigned int close_delay, closing_wait; tty_lock(tty); + close_delay = jiffies_to_msecs(state->tport.close_delay) / 10; + closing_wait = state->tport.closing_wait; + if (closing_wait != ASYNC_CLOSING_WAIT_NONE) + closing_wait = jiffies_to_msecs(closing_wait) / 10; + ss->line = tty->index; ss->port = state->port; ss->flags = state->tport.flags; ss->xmit_fifo_size = state->xmit_fifo_size; ss->baud_base = state->baud_base; - ss->close_delay = state->tport.close_delay; - ss->closing_wait = state->tport.closing_wait; + ss->close_delay = close_delay; + ss->closing_wait = closing_wait; ss->custom_divisor = state->custom_divisor; tty_unlock(tty); return 0; @@ -957,6 +963,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss) struct tty_port *port = &state->tport; bool change_spd; int retval = 0; + unsigned int close_delay, closing_wait; tty_lock(tty); change_spd = ((ss->flags ^ port->flags) & ASYNC_SPD_MASK) || @@ -966,10 +973,16 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss) tty_unlock(tty); return -EINVAL; } - + + close_delay = msecs_to_jiffies(ss->close_delay * 10); + closing_wait = ss->closing_wait; + if (closing_wait != ASYNC_CLOSING_WAIT_NONE) + closing_wait = msecs_to_jiffies(closing_wait * 10); + if (!serial_isroot()) { if ((ss->baud_base != state->baud_base) || - (ss->close_delay != port->close_delay) || + (close_delay != port->close_delay) || + (closing_wait != port->closing_wait) || (ss->xmit_fifo_size != state->xmit_fifo_size) || ((ss->flags & ~ASYNC_USR_MASK) != (port->flags & ~ASYNC_USR_MASK))) { @@ -996,8 +1009,8 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss) port->flags = ((port->flags & ~ASYNC_FLAGS) | (ss->flags & ASYNC_FLAGS)); state->custom_divisor = ss->custom_divisor; - port->close_delay = ss->close_delay * HZ/100; - port->closing_wait = ss->closing_wait * HZ/100; + port->close_delay = close_delay; + port->closing_wait = closing_wait; check_and_exit: if (tty_port_initialized(port)) { @@ -1622,21 +1635,17 @@ fail_put_tty_driver: static int __exit amiga_serial_remove(struct platform_device *pdev) { - int error; struct serial_state *state = platform_get_drvdata(pdev); /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ - error = tty_unregister_driver(serial_driver); - if (error) - printk("SERIAL: failed to unregister serial driver (%d)\n", - error); + tty_unregister_driver(serial_driver); put_tty_driver(serial_driver); tty_port_destroy(&state->tport); free_irq(IRQ_AMIGA_TBE, state); free_irq(IRQ_AMIGA_RBF, state); - return error; + return 0; } static struct platform_driver amiga_serial_driver = { diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c deleted file mode 100644 index 097266342e5e..000000000000 --- a/drivers/tty/cyclades.c +++ /dev/null @@ -1,4119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#undef BLOCKMOVE -#define Z_WAKE -#undef Z_EXT_CHARS_IN_BUFFER - -/* - * This file contains the driver for the Cyclades async multiport - * serial boards. - * - * Initially written by Randolph Bentson . - * Modified and maintained by Marcio Saito . - * - * Copyright (C) 2007-2009 Jiri Slaby - * - * Much of the design and some of the code came from serial.c - * which was copyright (C) 1991, 1992 Linus Torvalds. It was - * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, - * and then fixed as suggested by Michael K. Johnson 12/12/92. - * Converted to pci probing and cleaned up by Jiri Slaby. - * - */ - -#define CY_VERSION "2.6" - -/* If you need to install more boards than NR_CARDS, change the constant - in the definition below. No other change is necessary to support up to - eight boards. Beyond that you'll have to extend cy_isa_addresses. */ - -#define NR_CARDS 4 - -/* - If the total number of ports is larger than NR_PORTS, change this - constant in the definition below. No other change is necessary to - support more boards/ports. */ - -#define NR_PORTS 256 - -#define ZO_V1 0 -#define ZO_V2 1 -#define ZE_V1 2 - -#define SERIAL_PARANOIA_CHECK -#undef CY_DEBUG_OPEN -#undef CY_DEBUG_THROTTLE -#undef CY_DEBUG_OTHER -#undef CY_DEBUG_IO -#undef CY_DEBUG_COUNT -#undef CY_DEBUG_DTR -#undef CY_DEBUG_INTERRUPTS -#undef CY_16Y_HACK -#undef CY_ENABLE_MONITORING -#undef CY_PCI_DEBUG - -/* - * Include section - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include - -static void cy_send_xchar(struct tty_struct *tty, char ch); - -#ifndef SERIAL_XMIT_SIZE -#define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) -#endif - -/* firmware stuff */ -#define ZL_MAX_BLOCKS 16 -#define DRIVER_VERSION 0x02010203 -#define RAM_SIZE 0x80000 - -enum zblock_type { - ZBLOCK_PRG = 0, - ZBLOCK_FPGA = 1 -}; - -struct zfile_header { - char name[64]; - char date[32]; - char aux[32]; - u32 n_config; - u32 config_offset; - u32 n_blocks; - u32 block_offset; - u32 reserved[9]; -} __attribute__ ((packed)); - -struct zfile_config { - char name[64]; - u32 mailbox; - u32 function; - u32 n_blocks; - u32 block_list[ZL_MAX_BLOCKS]; -} __attribute__ ((packed)); - -struct zfile_block { - u32 type; - u32 file_offset; - u32 ram_offset; - u32 size; -} __attribute__ ((packed)); - -static struct tty_driver *cy_serial_driver; - -#ifdef CONFIG_ISA -/* This is the address lookup table. The driver will probe for - Cyclom-Y/ISA boards at all addresses in here. If you want the - driver to probe addresses at a different address, add it to - this table. If the driver is probing some other board and - causing problems, remove the offending address from this table. -*/ - -static unsigned int cy_isa_addresses[] = { - 0xD0000, - 0xD2000, - 0xD4000, - 0xD6000, - 0xD8000, - 0xDA000, - 0xDC000, - 0xDE000, - 0, 0, 0, 0, 0, 0, 0, 0 -}; - -#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) - -static long maddr[NR_CARDS]; -static int irq[NR_CARDS]; - -module_param_hw_array(maddr, long, iomem, NULL, 0); -module_param_hw_array(irq, int, irq, NULL, 0); - -#endif /* CONFIG_ISA */ - -/* This is the per-card data structure containing address, irq, number of - channels, etc. This driver supports a maximum of NR_CARDS cards. -*/ -static struct cyclades_card cy_card[NR_CARDS]; - -static int cy_next_channel; /* next minor available */ - -/* - * This is used to look up the divisor speeds and the timeouts - * We're normally limited to 15 distinct baud rates. The extra - * are accessed via settings in info->port.flags. - * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, - * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, - * HI VHI - * 20 - */ -static const int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, - 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, - 230400, 0 -}; - -static const char baud_co_25[] = { /* 25 MHz clock option table */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, - 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static const char baud_bpr_25[] = { /* 25 MHz baud rate period table */ - 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, - 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 -}; - -static const char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, - 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00 -}; - -static const char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ - 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, - 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, - 0x21 -}; - -static const char baud_cor3[] = { /* receive threshold */ - 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, - 0x07 -}; - -/* - * The Cyclades driver implements HW flow control as any serial driver. - * The cyclades_port structure member rflow and the vector rflow_thr - * allows us to take advantage of a special feature in the CD1400 to avoid - * data loss even when the system interrupt latency is too high. These flags - * are to be used only with very special applications. Setting these flags - * requires the use of a special cable (DTR and RTS reversed). In the new - * CD1400-based boards (rev. 6.00 or later), there is no need for special - * cables. - */ - -static const char rflow_thr[] = { /* rflow threshold */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a -}; - -/* The Cyclom-Ye has placed the sequential chips in non-sequential - * address order. This look-up table overcomes that problem. - */ -static const unsigned int cy_chip_offset[] = { 0x0000, - 0x0400, - 0x0800, - 0x0C00, - 0x0200, - 0x0600, - 0x0A00, - 0x0E00 -}; - -/* PCI related definitions */ - -#ifdef CONFIG_PCI -static const struct pci_device_id cy_pci_dev_id[] = { - /* PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, - /* PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, - /* 4Y PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, - /* 4Y PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, - /* 8Y PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, - /* 8Y PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, - /* Z PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, - /* Z PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, - { } /* end of table */ -}; -MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); -#endif - -static void cy_start(struct tty_struct *); -static void cy_set_line_char(struct cyclades_port *, struct tty_struct *); -static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); -#ifdef CONFIG_ISA -static unsigned detect_isa_irq(void __iomem *); -#endif /* CONFIG_ISA */ - -#ifndef CONFIG_CYZ_INTR -static void cyz_poll(struct timer_list *); - -/* The Cyclades-Z polling cycle is defined by this variable */ -static long cyz_polling_cycle = CZ_DEF_POLL; - -static DEFINE_TIMER(cyz_timerlist, cyz_poll); - -#else /* CONFIG_CYZ_INTR */ -static void cyz_rx_restart(struct timer_list *); -#endif /* CONFIG_CYZ_INTR */ - -static void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val) -{ - struct cyclades_card *card = port->card; - - cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val); -} - -static u8 cyy_readb(struct cyclades_port *port, u32 reg) -{ - struct cyclades_card *card = port->card; - - return readb(port->u.cyy.base_addr + (reg << card->bus_index)); -} - -static inline bool cy_is_Z(struct cyclades_card *card) -{ - return card->num_chips == (unsigned int)-1; -} - -static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr) -{ - return readl(&ctl_addr->init_ctrl) & (1 << 17); -} - -static inline bool cyz_fpga_loaded(struct cyclades_card *card) -{ - return __cyz_fpga_loaded(card->ctl_addr.p9060); -} - -static bool cyz_is_loaded(struct cyclades_card *card) -{ - struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS; - - return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) && - readl(&fw_id->signature) == ZFIRM_ID; -} - -static int serial_paranoia_check(struct cyclades_port *info, - const char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - if (!info) { - printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " - "in %s\n", name, routine); - return 1; - } - - if (info->magic != CYCLADES_MAGIC) { - printk(KERN_WARNING "cyc Warning: bad magic number for serial " - "struct (%s) in %s\n", name, routine); - return 1; - } -#endif - return 0; -} - -/***********************************************************/ -/********* Start of block of Cyclom-Y specific code ********/ - -/* This routine waits up to 1000 micro-seconds for the previous - command to the Cirrus chip to complete and then issues the - new command. An error is returned if the previous command - didn't finish within the time limit. - - This function is only called from inside spinlock-protected code. - */ -static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index) -{ - void __iomem *ccr = base_addr + (CyCCR << index); - unsigned int i; - - /* Check to see that the previous command has completed */ - for (i = 0; i < 100; i++) { - if (readb(ccr) == 0) - break; - udelay(10L); - } - /* if the CCR never cleared, the previous command - didn't finish within the "reasonable time" */ - if (i == 100) - return -1; - - /* Issue the new command */ - cy_writeb(ccr, cmd); - - return 0; -} - -static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd) -{ - return __cyy_issue_cmd(port->u.cyy.base_addr, cmd, - port->card->bus_index); -} - -#ifdef CONFIG_ISA -/* ISA interrupt detection code */ -static unsigned detect_isa_irq(void __iomem *address) -{ - int irq; - unsigned long irqs, flags; - int save_xir, save_car; - int index = 0; /* IRQ probing is only for ISA */ - - /* forget possible initially masked and pending IRQ */ - irq = probe_irq_off(probe_irq_on()); - - /* Clear interrupts on the board first */ - cy_writeb(address + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - - irqs = probe_irq_on(); - /* Wait ... */ - msleep(5); - - /* Enable the Tx interrupts on the CD1400 */ - local_irq_save(flags); - cy_writeb(address + (CyCAR << index), 0); - __cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index); - - cy_writeb(address + (CyCAR << index), 0); - cy_writeb(address + (CySRER << index), - readb(address + (CySRER << index)) | CyTxRdy); - local_irq_restore(flags); - - /* Wait ... */ - msleep(5); - - /* Check which interrupt is in use */ - irq = probe_irq_off(irqs); - - /* Clean up */ - save_xir = (u_char) readb(address + (CyTIR << index)); - save_car = readb(address + (CyCAR << index)); - cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); - cy_writeb(address + (CySRER << index), - readb(address + (CySRER << index)) & ~CyTxRdy); - cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); - cy_writeb(address + (CyCAR << index), (save_car)); - cy_writeb(address + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - - return (irq > 0) ? irq : 0; -} -#endif /* CONFIG_ISA */ - -static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, - void __iomem *base_addr) -{ - struct cyclades_port *info; - struct tty_port *port; - int len, index = cinfo->bus_index; - u8 ivr, save_xir, channel, save_car, data, char_count; - -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); -#endif - /* determine the channel & change to that context */ - save_xir = readb(base_addr + (CyRIR << index)); - channel = save_xir & CyIRChannel; - info = &cinfo->ports[channel + chip * 4]; - port = &info->port; - save_car = cyy_readb(info, CyCAR); - cyy_writeb(info, CyCAR, save_xir); - ivr = cyy_readb(info, CyRIVR) & CyIVRMask; - - /* there is an open port for this data */ - if (ivr == CyIVRRxEx) { /* exception */ - data = cyy_readb(info, CyRDSR); - - /* For statistics only */ - if (data & CyBREAK) - info->icount.brk++; - else if (data & CyFRAME) - info->icount.frame++; - else if (data & CyPARITY) - info->icount.parity++; - else if (data & CyOVERRUN) - info->icount.overrun++; - - if (data & info->ignore_status_mask) { - info->icount.rx++; - return; - } - if (tty_buffer_request_room(port, 1)) { - if (data & info->read_status_mask) { - if (data & CyBREAK) { - tty_insert_flip_char(port, - cyy_readb(info, CyRDSR), - TTY_BREAK); - info->icount.rx++; - if (port->flags & ASYNC_SAK) { - struct tty_struct *tty = - tty_port_tty_get(port); - if (tty) { - do_SAK(tty); - tty_kref_put(tty); - } - } - } else if (data & CyFRAME) { - tty_insert_flip_char(port, - cyy_readb(info, CyRDSR), - TTY_FRAME); - info->icount.rx++; - info->idle_stats.frame_errs++; - } else if (data & CyPARITY) { - /* Pieces of seven... */ - tty_insert_flip_char(port, - cyy_readb(info, CyRDSR), - TTY_PARITY); - info->icount.rx++; - info->idle_stats.parity_errs++; - } else if (data & CyOVERRUN) { - tty_insert_flip_char(port, 0, - TTY_OVERRUN); - info->icount.rx++; - /* If the flip buffer itself is - overflowing, we still lose - the next incoming character. - */ - tty_insert_flip_char(port, - cyy_readb(info, CyRDSR), - TTY_FRAME); - info->icount.rx++; - info->idle_stats.overruns++; - /* These two conditions may imply */ - /* a normal read should be done. */ - /* } else if(data & CyTIMEOUT) { */ - /* } else if(data & CySPECHAR) { */ - } else { - tty_insert_flip_char(port, 0, - TTY_NORMAL); - info->icount.rx++; - } - } else { - tty_insert_flip_char(port, 0, TTY_NORMAL); - info->icount.rx++; - } - } else { - /* there was a software buffer overrun and nothing - * could be done about it!!! */ - info->icount.buf_overrun++; - info->idle_stats.overruns++; - } - } else { /* normal character reception */ - /* load # chars available from the chip */ - char_count = cyy_readb(info, CyRDCR); - -#ifdef CY_ENABLE_MONITORING - ++info->mon.int_count; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; -#endif - len = tty_buffer_request_room(port, char_count); - while (len--) { - data = cyy_readb(info, CyRDSR); - tty_insert_flip_char(port, data, TTY_NORMAL); - info->idle_stats.recv_bytes++; - info->icount.rx++; -#ifdef CY_16Y_HACK - udelay(10L); -#endif - } - info->idle_stats.recv_idle = jiffies; - } - tty_schedule_flip(port); - - /* end of service */ - cyy_writeb(info, CyRIR, save_xir & 0x3f); - cyy_writeb(info, CyCAR, save_car); -} - -static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, - void __iomem *base_addr) -{ - struct cyclades_port *info; - struct tty_struct *tty; - int char_count, index = cinfo->bus_index; - u8 save_xir, channel, save_car, outch; - - /* Since we only get here when the transmit buffer - is empty, we know we can always stuff a dozen - characters. */ -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); -#endif - - /* determine the channel & change to that context */ - save_xir = readb(base_addr + (CyTIR << index)); - channel = save_xir & CyIRChannel; - save_car = readb(base_addr + (CyCAR << index)); - cy_writeb(base_addr + (CyCAR << index), save_xir); - - info = &cinfo->ports[channel + chip * 4]; - tty = tty_port_tty_get(&info->port); - if (tty == NULL) { - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); - goto end; - } - - /* load the on-chip space for outbound data */ - char_count = info->xmit_fifo_size; - - if (info->x_char) { /* send special char */ - outch = info->x_char; - cyy_writeb(info, CyTDR, outch); - char_count--; - info->icount.tx++; - info->x_char = 0; - } - - if (info->breakon || info->breakoff) { - if (info->breakon) { - cyy_writeb(info, CyTDR, 0); - cyy_writeb(info, CyTDR, 0x81); - info->breakon = 0; - char_count -= 2; - } - if (info->breakoff) { - cyy_writeb(info, CyTDR, 0); - cyy_writeb(info, CyTDR, 0x83); - info->breakoff = 0; - char_count -= 2; - } - } - - while (char_count-- > 0) { - if (!info->xmit_cnt) { - if (cyy_readb(info, CySRER) & CyTxMpty) { - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxMpty); - } else { - cyy_writeb(info, CySRER, CyTxMpty | - (cyy_readb(info, CySRER) & ~CyTxRdy)); - } - goto done; - } - if (info->port.xmit_buf == NULL) { - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxRdy); - goto done; - } - if (tty->stopped || tty->hw_stopped) { - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxRdy); - goto done; - } - /* Because the Embedded Transmit Commands have been enabled, - * we must check to see if the escape character, NULL, is being - * sent. If it is, we must ensure that there is room for it to - * be doubled in the output stream. Therefore we no longer - * advance the pointer when the character is fetched, but - * rather wait until after the check for a NULL output - * character. This is necessary because there may not be room - * for the two chars needed to send a NULL.) - */ - outch = info->port.xmit_buf[info->xmit_tail]; - if (outch) { - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) & - (SERIAL_XMIT_SIZE - 1); - cyy_writeb(info, CyTDR, outch); - info->icount.tx++; - } else { - if (char_count > 1) { - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) & - (SERIAL_XMIT_SIZE - 1); - cyy_writeb(info, CyTDR, outch); - cyy_writeb(info, CyTDR, 0); - info->icount.tx++; - char_count--; - } - } - } - -done: - tty_wakeup(tty); - tty_kref_put(tty); -end: - /* end of service */ - cyy_writeb(info, CyTIR, save_xir & 0x3f); - cyy_writeb(info, CyCAR, save_car); -} - -static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, - void __iomem *base_addr) -{ - struct cyclades_port *info; - struct tty_struct *tty; - int index = cinfo->bus_index; - u8 save_xir, channel, save_car, mdm_change, mdm_status; - - /* determine the channel & change to that context */ - save_xir = readb(base_addr + (CyMIR << index)); - channel = save_xir & CyIRChannel; - info = &cinfo->ports[channel + chip * 4]; - save_car = cyy_readb(info, CyCAR); - cyy_writeb(info, CyCAR, save_xir); - - mdm_change = cyy_readb(info, CyMISR); - mdm_status = cyy_readb(info, CyMSVR1); - - tty = tty_port_tty_get(&info->port); - if (!tty) - goto end; - - if (mdm_change & CyANY_DELTA) { - /* For statistics only */ - if (mdm_change & CyDCD) - info->icount.dcd++; - if (mdm_change & CyCTS) - info->icount.cts++; - if (mdm_change & CyDSR) - info->icount.dsr++; - if (mdm_change & CyRI) - info->icount.rng++; - - wake_up_interruptible(&info->port.delta_msr_wait); - } - - if ((mdm_change & CyDCD) && tty_port_check_carrier(&info->port)) { - if (mdm_status & CyDCD) - wake_up_interruptible(&info->port.open_wait); - else - tty_hangup(tty); - } - if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) { - if (tty->hw_stopped) { - if (mdm_status & CyCTS) { - /* cy_start isn't used - because... !!! */ - tty->hw_stopped = 0; - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) | CyTxRdy); - tty_wakeup(tty); - } - } else { - if (!(mdm_status & CyCTS)) { - /* cy_stop isn't used - because ... !!! */ - tty->hw_stopped = 1; - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxRdy); - } - } - } -/* if (mdm_change & CyDSR) { - } - if (mdm_change & CyRI) { - }*/ - tty_kref_put(tty); -end: - /* end of service */ - cyy_writeb(info, CyMIR, save_xir & 0x3f); - cyy_writeb(info, CyCAR, save_car); -} - -/* The real interrupt service routine is called - whenever the card wants its hand held--chars - received, out buffer empty, modem change, etc. - */ -static irqreturn_t cyy_interrupt(int irq, void *dev_id) -{ - int status; - struct cyclades_card *cinfo = dev_id; - void __iomem *base_addr, *card_base_addr; - unsigned int chip, too_many, had_work; - int index; - - if (unlikely(cinfo == NULL)) { -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n", - irq); -#endif - return IRQ_NONE; /* spurious interrupt */ - } - - card_base_addr = cinfo->base_addr; - index = cinfo->bus_index; - - /* card was not initialized yet (e.g. DEBUG_SHIRQ) */ - if (unlikely(card_base_addr == NULL)) - return IRQ_HANDLED; - - /* This loop checks all chips in the card. Make a note whenever - _any_ chip had some work to do, as this is considered an - indication that there will be more to do. Only when no chip - has any work does this outermost loop exit. - */ - do { - had_work = 0; - for (chip = 0; chip < cinfo->num_chips; chip++) { - base_addr = cinfo->base_addr + - (cy_chip_offset[chip] << index); - too_many = 0; - while ((status = readb(base_addr + - (CySVRR << index))) != 0x00) { - had_work++; - /* The purpose of the following test is to ensure that - no chip can monopolize the driver. This forces the - chips to be checked in a round-robin fashion (after - draining each of a bunch (1000) of characters). - */ - if (1000 < too_many++) - break; - spin_lock(&cinfo->card_lock); - if (status & CySRReceive) /* rx intr */ - cyy_chip_rx(cinfo, chip, base_addr); - if (status & CySRTransmit) /* tx intr */ - cyy_chip_tx(cinfo, chip, base_addr); - if (status & CySRModem) /* modem intr */ - cyy_chip_modem(cinfo, chip, base_addr); - spin_unlock(&cinfo->card_lock); - } - } - } while (had_work); - - /* clear interrupts */ - spin_lock(&cinfo->card_lock); - cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - spin_unlock(&cinfo->card_lock); - return IRQ_HANDLED; -} /* cyy_interrupt */ - -static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set, - unsigned int clear) -{ - struct cyclades_card *card = info->card; - int channel = info->line - card->first_line; - u32 rts, dtr, msvrr, msvrd; - - channel &= 0x03; - - if (info->rtsdtr_inv) { - msvrr = CyMSVR2; - msvrd = CyMSVR1; - rts = CyDTR; - dtr = CyRTS; - } else { - msvrr = CyMSVR1; - msvrd = CyMSVR2; - rts = CyRTS; - dtr = CyDTR; - } - if (set & TIOCM_RTS) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrr, rts); - } - if (clear & TIOCM_RTS) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrr, ~rts); - } - if (set & TIOCM_DTR) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrd, dtr); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); - printk(KERN_DEBUG " status: 0x%x, 0x%x\n", - cyy_readb(info, CyMSVR1), - cyy_readb(info, CyMSVR2)); -#endif - } - if (clear & TIOCM_DTR) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrd, ~dtr); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); - printk(KERN_DEBUG " status: 0x%x, 0x%x\n", - cyy_readb(info, CyMSVR1), - cyy_readb(info, CyMSVR2)); -#endif - } -} - -/***********************************************************/ -/********* End of block of Cyclom-Y specific code **********/ -/******** Start of block of Cyclades-Z specific code *******/ -/***********************************************************/ - -static int -cyz_fetch_msg(struct cyclades_card *cinfo, - __u32 *channel, __u8 *cmd, __u32 *param) -{ - struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; - unsigned long loc_doorbell; - - loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell); - if (loc_doorbell) { - *cmd = (char)(0xff & loc_doorbell); - *channel = readl(&board_ctrl->fwcmd_channel); - *param = (__u32) readl(&board_ctrl->fwcmd_param); - cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff); - return 1; - } - return 0; -} /* cyz_fetch_msg */ - -static int -cyz_issue_cmd(struct cyclades_card *cinfo, - __u32 channel, __u8 cmd, __u32 param) -{ - struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; - __u32 __iomem *pci_doorbell; - unsigned int index; - - if (!cyz_is_loaded(cinfo)) - return -1; - - index = 0; - pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell; - while ((readl(pci_doorbell) & 0xff) != 0) { - if (index++ == 1000) - return (int)(readl(pci_doorbell) & 0xff); - udelay(50L); - } - cy_writel(&board_ctrl->hcmd_channel, channel); - cy_writel(&board_ctrl->hcmd_param, param); - cy_writel(pci_doorbell, (long)cmd); - - return 0; -} /* cyz_issue_cmd */ - -static void cyz_handle_rx(struct cyclades_port *info) -{ - struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; - struct cyclades_card *cinfo = info->card; - struct tty_port *port = &info->port; - unsigned int char_count; - int len; -#ifdef BLOCKMOVE - unsigned char *buf; -#else - char data; -#endif - __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; - - rx_get = new_rx_get = readl(&buf_ctrl->rx_get); - rx_put = readl(&buf_ctrl->rx_put); - rx_bufsize = readl(&buf_ctrl->rx_bufsize); - rx_bufaddr = readl(&buf_ctrl->rx_bufaddr); - if (rx_put >= rx_get) - char_count = rx_put - rx_get; - else - char_count = rx_put - rx_get + rx_bufsize; - - if (!char_count) - return; - -#ifdef CY_ENABLE_MONITORING - info->mon.int_count++; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; -#endif - -#ifdef BLOCKMOVE - /* we'd like to use memcpy(t, f, n) and memset(s, c, count) - for performance, but because of buffer boundaries, there - may be several steps to the operation */ - while (1) { - len = tty_prepare_flip_string(port, &buf, - char_count); - if (!len) - break; - - len = min_t(unsigned int, min(len, char_count), - rx_bufsize - new_rx_get); - - memcpy_fromio(buf, cinfo->base_addr + - rx_bufaddr + new_rx_get, len); - - new_rx_get = (new_rx_get + len) & - (rx_bufsize - 1); - char_count -= len; - info->icount.rx += len; - info->idle_stats.recv_bytes += len; - } -#else - len = tty_buffer_request_room(port, char_count); - while (len--) { - data = readb(cinfo->base_addr + rx_bufaddr + - new_rx_get); - new_rx_get = (new_rx_get + 1) & - (rx_bufsize - 1); - tty_insert_flip_char(port, data, TTY_NORMAL); - info->idle_stats.recv_bytes++; - info->icount.rx++; - } -#endif -#ifdef CONFIG_CYZ_INTR - /* Recalculate the number of chars in the RX buffer and issue - a cmd in case it's higher than the RX high water mark */ - rx_put = readl(&buf_ctrl->rx_put); - if (rx_put >= rx_get) - char_count = rx_put - rx_get; - else - char_count = rx_put - rx_get + rx_bufsize; - if (char_count >= readl(&buf_ctrl->rx_threshold) && - !timer_pending(&info->rx_full_timer)) - mod_timer(&info->rx_full_timer, jiffies + 1); -#endif - info->idle_stats.recv_idle = jiffies; - tty_schedule_flip(&info->port); - - /* Update rx_get */ - cy_writel(&buf_ctrl->rx_get, new_rx_get); -} - -static void cyz_handle_tx(struct cyclades_port *info) -{ - struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; - struct cyclades_card *cinfo = info->card; - struct tty_struct *tty; - u8 data; - unsigned int char_count; -#ifdef BLOCKMOVE - int small_count; -#endif - __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; - - if (info->xmit_cnt <= 0) /* Nothing to transmit */ - return; - - tx_get = readl(&buf_ctrl->tx_get); - tx_put = readl(&buf_ctrl->tx_put); - tx_bufsize = readl(&buf_ctrl->tx_bufsize); - tx_bufaddr = readl(&buf_ctrl->tx_bufaddr); - if (tx_put >= tx_get) - char_count = tx_get - tx_put - 1 + tx_bufsize; - else - char_count = tx_get - tx_put - 1; - - if (!char_count) - return; - - tty = tty_port_tty_get(&info->port); - if (tty == NULL) - goto ztxdone; - - if (info->x_char) { /* send special char */ - data = info->x_char; - - cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); - tx_put = (tx_put + 1) & (tx_bufsize - 1); - info->x_char = 0; - char_count--; - info->icount.tx++; - } -#ifdef BLOCKMOVE - while (0 < (small_count = min_t(unsigned int, - tx_bufsize - tx_put, min_t(unsigned int, - (SERIAL_XMIT_SIZE - info->xmit_tail), - min_t(unsigned int, info->xmit_cnt, - char_count))))) { - - memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + tx_put), - &info->port.xmit_buf[info->xmit_tail], - small_count); - - tx_put = (tx_put + small_count) & (tx_bufsize - 1); - char_count -= small_count; - info->icount.tx += small_count; - info->xmit_cnt -= small_count; - info->xmit_tail = (info->xmit_tail + small_count) & - (SERIAL_XMIT_SIZE - 1); - } -#else - while (info->xmit_cnt && char_count) { - data = info->port.xmit_buf[info->xmit_tail]; - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) & - (SERIAL_XMIT_SIZE - 1); - - cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); - tx_put = (tx_put + 1) & (tx_bufsize - 1); - char_count--; - info->icount.tx++; - } -#endif - tty_wakeup(tty); - tty_kref_put(tty); -ztxdone: - /* Update tx_put */ - cy_writel(&buf_ctrl->tx_put, tx_put); -} - -static void cyz_handle_cmd(struct cyclades_card *cinfo) -{ - struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; - struct cyclades_port *info; - __u32 channel, param, fw_ver; - __u8 cmd; - int special_count; - int delta_count; - - fw_ver = readl(&board_ctrl->fw_version); - - while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { - special_count = 0; - delta_count = 0; - info = &cinfo->ports[channel]; - - switch (cmd) { - case C_CM_PR_ERROR: - tty_insert_flip_char(&info->port, 0, TTY_PARITY); - info->icount.rx++; - special_count++; - break; - case C_CM_FR_ERROR: - tty_insert_flip_char(&info->port, 0, TTY_FRAME); - info->icount.rx++; - special_count++; - break; - case C_CM_RXBRK: - tty_insert_flip_char(&info->port, 0, TTY_BREAK); - info->icount.rx++; - special_count++; - break; - case C_CM_MDCD: - info->icount.dcd++; - delta_count++; - if (tty_port_check_carrier(&info->port)) { - u32 dcd = fw_ver > 241 ? param : - readl(&info->u.cyz.ch_ctrl->rs_status); - if (dcd & C_RS_DCD) - wake_up_interruptible(&info->port.open_wait); - else - tty_port_tty_hangup(&info->port, false); - } - break; - case C_CM_MCTS: - info->icount.cts++; - delta_count++; - break; - case C_CM_MRI: - info->icount.rng++; - delta_count++; - break; - case C_CM_MDSR: - info->icount.dsr++; - delta_count++; - break; -#ifdef Z_WAKE - case C_CM_IOCTLW: - complete(&info->shutdown_wait); - break; -#endif -#ifdef CONFIG_CYZ_INTR - case C_CM_RXHIWM: - case C_CM_RXNNDT: - case C_CM_INTBACK2: - /* Reception Interrupt */ -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " - "port %ld\n", info->card, channel); -#endif - cyz_handle_rx(info); - break; - case C_CM_TXBEMPTY: - case C_CM_TXLOWWM: - case C_CM_INTBACK: - /* Transmission Interrupt */ -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " - "port %ld\n", info->card, channel); -#endif - cyz_handle_tx(info); - break; -#endif /* CONFIG_CYZ_INTR */ - case C_CM_FATAL: - /* should do something with this !!! */ - break; - default: - break; - } - if (delta_count) - wake_up_interruptible(&info->port.delta_msr_wait); - if (special_count) - tty_schedule_flip(&info->port); - } -} - -#ifdef CONFIG_CYZ_INTR -static irqreturn_t cyz_interrupt(int irq, void *dev_id) -{ - struct cyclades_card *cinfo = dev_id; - - if (unlikely(!cyz_is_loaded(cinfo))) { -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " - "(IRQ%d).\n", irq); -#endif - return IRQ_NONE; - } - - /* Handle the interrupts */ - cyz_handle_cmd(cinfo); - - return IRQ_HANDLED; -} /* cyz_interrupt */ - -static void cyz_rx_restart(struct timer_list *t) -{ - struct cyclades_port *info = from_timer(info, t, rx_full_timer); - struct cyclades_card *card = info->card; - int retval; - __u32 channel = info->line - card->first_line; - unsigned long flags; - - spin_lock_irqsave(&card->card_lock, flags); - retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", - info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); -} - -#else /* CONFIG_CYZ_INTR */ - -static void cyz_poll(struct timer_list *unused) -{ - struct cyclades_card *cinfo; - struct cyclades_port *info; - unsigned long expires = jiffies + HZ; - unsigned int port, card; - - for (card = 0; card < NR_CARDS; card++) { - cinfo = &cy_card[card]; - - if (!cy_is_Z(cinfo)) - continue; - if (!cyz_is_loaded(cinfo)) - continue; - - /* Skip first polling cycle to avoid racing conditions with the FW */ - if (!cinfo->intr_enabled) { - cinfo->intr_enabled = 1; - continue; - } - - cyz_handle_cmd(cinfo); - - for (port = 0; port < cinfo->nports; port++) { - info = &cinfo->ports[port]; - - if (!info->throttle) - cyz_handle_rx(info); - cyz_handle_tx(info); - } - /* poll every 'cyz_polling_cycle' period */ - expires = jiffies + cyz_polling_cycle; - } - mod_timer(&cyz_timerlist, expires); -} /* cyz_poll */ - -#endif /* CONFIG_CYZ_INTR */ - -/********** End of block of Cyclades-Z specific code *********/ -/***********************************************************/ - -/* This is called whenever a port becomes active; - interrupts are enabled and DTR & RTS are turned on. - */ -static int cy_startup(struct cyclades_port *info, struct tty_struct *tty) -{ - struct cyclades_card *card; - unsigned long flags; - int retval = 0; - int channel; - unsigned long page; - - card = info->card; - channel = info->line - card->first_line; - - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - spin_lock_irqsave(&card->card_lock, flags); - - if (tty_port_initialized(&info->port)) - goto errout; - - if (!info->type) { - set_bit(TTY_IO_ERROR, &tty->flags); - goto errout; - } - - if (info->port.xmit_buf) - free_page(page); - else - info->port.xmit_buf = (unsigned char *)page; - - spin_unlock_irqrestore(&card->card_lock, flags); - - cy_set_line_char(info, tty); - - if (!cy_is_Z(card)) { - channel &= 0x03; - - spin_lock_irqsave(&card->card_lock, flags); - - cyy_writeb(info, CyCAR, channel); - - cyy_writeb(info, CyRTPR, - (info->default_timeout ? info->default_timeout : 0x02)); - /* 10ms rx timeout */ - - cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR); - - cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0); - - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData); - } else { - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - - if (!cyz_is_loaded(card)) - return -ENODEV; - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " - "base_addr %p\n", card, channel, card->base_addr); -#endif - spin_lock_irqsave(&card->card_lock, flags); - - cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE); -#ifdef Z_WAKE -#ifdef CONFIG_CYZ_INTR - cy_writel(&ch_ctrl->intr_enable, - C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | - C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD); -#else - cy_writel(&ch_ctrl->intr_enable, - C_IN_IOCTLW | C_IN_MDCD); -#endif /* CONFIG_CYZ_INTR */ -#else -#ifdef CONFIG_CYZ_INTR - cy_writel(&ch_ctrl->intr_enable, - C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | - C_IN_RXNNDT | C_IN_MDCD); -#else - cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD); -#endif /* CONFIG_CYZ_INTR */ -#endif /* Z_WAKE */ - - retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " - "%x\n", info->line, retval); - } - - /* Flush RX buffers before raising DTR and RTS */ - retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " - "%x\n", info->line, retval); - } - - /* set timeout !!! */ - /* set RTS and DTR !!! */ - tty_port_raise_dtr_rts(&info->port); - - /* enable send, recv, modem !!! */ - } - - tty_port_set_initialized(&info->port, 1); - - clear_bit(TTY_IO_ERROR, &tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - info->breakon = info->breakoff = 0; - memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); - info->idle_stats.in_use = - info->idle_stats.recv_idle = - info->idle_stats.xmit_idle = jiffies; - - spin_unlock_irqrestore(&card->card_lock, flags); - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc startup done\n"); -#endif - return 0; - -errout: - spin_unlock_irqrestore(&card->card_lock, flags); - free_page(page); - return retval; -} /* startup */ - -static void start_xmit(struct cyclades_port *info) -{ - struct cyclades_card *card = info->card; - unsigned long flags; - int channel = info->line - card->first_line; - - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { -#ifdef CONFIG_CYZ_INTR - int retval; - - spin_lock_irqsave(&card->card_lock, flags); - retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " - "%x\n", info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); -#else /* CONFIG_CYZ_INTR */ - /* Don't have to do anything at this time */ -#endif /* CONFIG_CYZ_INTR */ - } -} /* start_xmit */ - -/* - * This routine shuts down a serial port; interrupts are disabled, - * and DTR is dropped if the hangup on close termio flag is on. - */ -static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty) -{ - struct cyclades_card *card; - unsigned long flags; - - if (!tty_port_initialized(&info->port)) - return; - - card = info->card; - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - - /* Clear delta_msr_wait queue to avoid mem leaks. */ - wake_up_interruptible(&info->port.delta_msr_wait); - - if (info->port.xmit_buf) { - unsigned char *temp; - temp = info->port.xmit_buf; - info->port.xmit_buf = NULL; - free_page((unsigned long)temp); - } - if (C_HUPCL(tty)) - cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR); - - cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR); - /* it may be appropriate to clear _XMIT at - some later date (after testing)!!! */ - - set_bit(TTY_IO_ERROR, &tty->flags); - tty_port_set_initialized(&info->port, 0); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { -#ifdef CY_DEBUG_OPEN - int channel = info->line - card->first_line; - printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " - "base_addr %p\n", card, channel, card->base_addr); -#endif - - if (!cyz_is_loaded(card)) - return; - - spin_lock_irqsave(&card->card_lock, flags); - - if (info->port.xmit_buf) { - unsigned char *temp; - temp = info->port.xmit_buf; - info->port.xmit_buf = NULL; - free_page((unsigned long)temp); - } - - if (C_HUPCL(tty)) - tty_port_lower_dtr_rts(&info->port); - - set_bit(TTY_IO_ERROR, &tty->flags); - tty_port_set_initialized(&info->port, 0); - - spin_unlock_irqrestore(&card->card_lock, flags); - } - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc shutdown done\n"); -#endif -} /* shutdown */ - -/* - * ------------------------------------------------------------ - * cy_open() and friends - * ------------------------------------------------------------ - */ - -/* - * This routine is called whenever a serial port is opened. It - * performs the serial-specific initialization for the tty structure. - */ -static int cy_open(struct tty_struct *tty, struct file *filp) -{ - struct cyclades_port *info; - unsigned int i, line = tty->index; - int retval; - - for (i = 0; i < NR_CARDS; i++) - if (line < cy_card[i].first_line + cy_card[i].nports && - line >= cy_card[i].first_line) - break; - if (i >= NR_CARDS) - return -ENODEV; - info = &cy_card[i].ports[line - cy_card[i].first_line]; - if (info->line < 0) - return -ENODEV; - - /* If the card's firmware hasn't been loaded, - treat it as absent from the system. This - will make the user pay attention. - */ - if (cy_is_Z(info->card)) { - struct cyclades_card *cinfo = info->card; - struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; - - if (!cyz_is_loaded(cinfo)) { - if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) && - readl(&firm_id->signature) == - ZFIRM_HLT) { - printk(KERN_ERR "cyc:Cyclades-Z Error: you " - "need an external power supply for " - "this number of ports.\nFirmware " - "halted.\n"); - } else { - printk(KERN_ERR "cyc:Cyclades-Z firmware not " - "yet loaded\n"); - } - return -ENODEV; - } -#ifdef CONFIG_CYZ_INTR - else { - /* In case this Z board is operating in interrupt mode, its - interrupts should be enabled as soon as the first open - happens to one of its ports. */ - if (!cinfo->intr_enabled) { - u16 intr; - - /* Enable interrupts on the PLX chip */ - intr = readw(&cinfo->ctl_addr.p9060-> - intr_ctrl_stat) | 0x0900; - cy_writew(&cinfo->ctl_addr.p9060-> - intr_ctrl_stat, intr); - /* Enable interrupts on the FW */ - retval = cyz_issue_cmd(cinfo, 0, - C_CM_IRQ_ENBL, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:IRQ enable retval " - "was %x\n", retval); - } - cinfo->intr_enabled = 1; - } - } -#endif /* CONFIG_CYZ_INTR */ - /* Make sure this Z port really exists in hardware */ - if (info->line > (cinfo->first_line + cinfo->nports - 1)) - return -ENODEV; - } -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); -#endif - tty->driver_data = info; - if (serial_paranoia_check(info, tty->name, "cy_open")) - return -ENODEV; - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, - info->port.count); -#endif - info->port.count++; -#ifdef CY_DEBUG_COUNT - printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", - current->pid, info->port.count); -#endif - - /* - * Start up serial port - */ - retval = cy_startup(info, tty); - if (retval) - return retval; - - retval = tty_port_block_til_ready(&info->port, tty, filp); - if (retval) { -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " - "with %d\n", retval); -#endif - return retval; - } - - info->throttle = 0; - tty_port_tty_set(&info->port, tty); - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc:cy_open done\n"); -#endif - return 0; -} /* cy_open */ - -/* - * cy_wait_until_sent() --- wait until the transmitter is empty - */ -static void cy_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct cyclades_card *card; - struct cyclades_port *info = tty->driver_data; - unsigned long orig_jiffies; - int char_time; - - if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) - return; - - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time <= 0) - char_time = 1; - if (timeout < 0) - timeout = 0; - if (timeout) - char_time = min(char_time, timeout); - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2 * info->timeout) - timeout = 2 * info->timeout; - - card = info->card; - if (!cy_is_Z(card)) { - while (cyy_readb(info, CySRER) & CyTxRdy) { - if (msleep_interruptible(jiffies_to_msecs(char_time))) - break; - if (timeout && time_after(jiffies, orig_jiffies + - timeout)) - break; - } - } - /* Run one more char cycle */ - msleep_interruptible(jiffies_to_msecs(char_time * 5)); -} - -static void cy_flush_buffer(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - int channel, retval; - unsigned long flags; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) - return; - - card = info->card; - channel = info->line - card->first_line; - - spin_lock_irqsave(&card->card_lock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&card->card_lock, flags); - - if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board - buffers as well */ - spin_lock_irqsave(&card->card_lock, flags); - retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " - "was %x\n", info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); - } - tty_wakeup(tty); -} /* cy_flush_buffer */ - - -static void cy_do_close(struct tty_port *port) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *card; - unsigned long flags; - int channel; - - card = info->card; - channel = info->line - card->first_line; - spin_lock_irqsave(&card->card_lock, flags); - - if (!cy_is_Z(card)) { - /* Stop accepting input */ - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData); - if (tty_port_initialized(&info->port)) { - /* Waiting for on-board buffers to be empty before - closing the port */ - spin_unlock_irqrestore(&card->card_lock, flags); - cy_wait_until_sent(port->tty, info->timeout); - spin_lock_irqsave(&card->card_lock, flags); - } - } else { -#ifdef Z_WAKE - /* Waiting for on-board buffers to be empty before closing - the port */ - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - int retval; - - if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) { - retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L); - if (retval != 0) { - printk(KERN_DEBUG "cyc:cy_close retval on " - "ttyC%d was %x\n", info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); - wait_for_completion_interruptible(&info->shutdown_wait); - spin_lock_irqsave(&card->card_lock, flags); - } -#endif - } - spin_unlock_irqrestore(&card->card_lock, flags); - cy_shutdown(info, port->tty); -} - -/* - * This routine is called when a particular tty device is closed. - */ -static void cy_close(struct tty_struct *tty, struct file *filp) -{ - struct cyclades_port *info = tty->driver_data; - if (!info || serial_paranoia_check(info, tty->name, "cy_close")) - return; - tty_port_close(&info->port, tty, filp); -} /* cy_close */ - -/* This routine gets called when tty_write has put something into - * the write_queue. The characters may come from user space or - * kernel space. - * - * This routine will return the number of characters actually - * accepted for writing. - * - * If the port is not already transmitting stuff, start it off by - * enabling interrupts. The interrupt service routine will then - * ensure that the characters are sent. - * If the port is already active, there is no need to kick it. - * - */ -static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - int c, ret = 0; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_write")) - return 0; - - if (!info->port.xmit_buf) - return 0; - - spin_lock_irqsave(&info->card->card_lock, flags); - while (1) { - c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1)); - c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head)); - - if (c <= 0) - break; - - memcpy(info->port.xmit_buf + info->xmit_head, buf, c); - info->xmit_head = (info->xmit_head + c) & - (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - buf += c; - count -= c; - ret += c; - } - spin_unlock_irqrestore(&info->card->card_lock, flags); - - info->idle_stats.xmit_bytes += ret; - info->idle_stats.xmit_idle = jiffies; - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) - start_xmit(info); - - return ret; -} /* cy_write */ - -/* - * This routine is called by the kernel to write a single - * character to the tty device. If the kernel uses this routine, - * it must call the flush_chars() routine (if defined) when it is - * done stuffing characters into the driver. If there is no room - * in the queue, the character is ignored. - */ -static int cy_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_put_char")) - return 0; - - if (!info->port.xmit_buf) - return 0; - - spin_lock_irqsave(&info->card->card_lock, flags); - if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) { - spin_unlock_irqrestore(&info->card->card_lock, flags); - return 0; - } - - info->port.xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; - info->idle_stats.xmit_bytes++; - info->idle_stats.xmit_idle = jiffies; - spin_unlock_irqrestore(&info->card->card_lock, flags); - return 1; -} /* cy_put_char */ - -/* - * This routine is called by the kernel after it has written a - * series of characters to the tty device using put_char(). - */ -static void cy_flush_chars(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) - return; - - if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->port.xmit_buf) - return; - - start_xmit(info); -} /* cy_flush_chars */ - -/* - * This routine returns the numbers of characters the tty driver - * will accept for queuing to be written. This number is subject - * to change as output buffers get emptied, or if the output flow - * control is activated. - */ -static int cy_write_room(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - int ret; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} /* cy_write_room */ - -static int cy_chars_in_buffer(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) - return 0; - -#ifdef Z_EXT_CHARS_IN_BUFFER - if (!cy_is_Z(info->card)) { -#endif /* Z_EXT_CHARS_IN_BUFFER */ -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", - info->line, info->xmit_cnt); -#endif - return info->xmit_cnt; -#ifdef Z_EXT_CHARS_IN_BUFFER - } else { - struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; - int char_count; - __u32 tx_put, tx_get, tx_bufsize; - - tx_get = readl(&buf_ctrl->tx_get); - tx_put = readl(&buf_ctrl->tx_put); - tx_bufsize = readl(&buf_ctrl->tx_bufsize); - if (tx_put >= tx_get) - char_count = tx_put - tx_get; - else - char_count = tx_put - tx_get + tx_bufsize; -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", - info->line, info->xmit_cnt + char_count); -#endif - return info->xmit_cnt + char_count; - } -#endif /* Z_EXT_CHARS_IN_BUFFER */ -} /* cy_chars_in_buffer */ - -/* - * ------------------------------------------------------------ - * cy_ioctl() and friends - * ------------------------------------------------------------ - */ - -static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) -{ - int co, co_val, bpr; - __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : - 25000000); - - if (baud == 0) { - info->tbpr = info->tco = info->rbpr = info->rco = 0; - return; - } - - /* determine which prescaler to use */ - for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { - if (cy_clock / co_val / baud > 63) - break; - } - - bpr = (cy_clock / co_val * 2 / baud + 1) / 2; - if (bpr > 255) - bpr = 255; - - info->tbpr = info->rbpr = bpr; - info->tco = info->rco = co; -} - -/* - * This routine finds or computes the various line characteristics. - * It used to be called config_setup - */ -static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty) -{ - struct cyclades_card *card; - unsigned long flags; - int channel; - unsigned cflag, iflag; - int baud, baud_rate = 0; - int i; - - if (info->line == -1) - return; - - cflag = tty->termios.c_cflag; - iflag = tty->termios.c_iflag; - - card = info->card; - channel = info->line - card->first_line; - - if (!cy_is_Z(card)) { - u32 cflags; - - /* baud rate */ - baud = tty_get_baud_rate(tty); - if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - if (info->custom_divisor) - baud_rate = info->baud / info->custom_divisor; - else - baud_rate = info->baud; - } else if (baud > CD1400_MAX_SPEED) { - baud = CD1400_MAX_SPEED; - } - /* find the baud index */ - for (i = 0; i < 20; i++) { - if (baud == baud_table[i]) - break; - } - if (i == 20) - i = 19; /* CD1400_MAX_SPEED */ - - if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - cyy_baud_calc(info, baud_rate); - } else { - if (info->chip_rev >= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[i]; /* Tx BPR */ - info->tco = baud_co_60[i]; /* Tx CO */ - info->rbpr = baud_bpr_60[i]; /* Rx BPR */ - info->rco = baud_co_60[i]; /* Rx CO */ - } else { - info->tbpr = baud_bpr_25[i]; /* Tx BPR */ - info->tco = baud_co_25[i]; /* Tx CO */ - info->rbpr = baud_bpr_25[i]; /* Rx BPR */ - info->rco = baud_co_25[i]; /* Rx CO */ - } - } - if (baud_table[i] == 134) { - /* get it right for 134.5 baud */ - info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + - 2; - } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud_rate) + 2; - } else if (baud_table[i]) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud_table[i]) + 2; - /* this needs to be propagated into the card info */ - } else { - info->timeout = 0; - } - /* By tradition (is it a standard?) a baud rate of zero - implies the line should be/has been closed. A bit - later in this routine such a test is performed. */ - - /* byte size and parity */ - info->cor5 = 0; - info->cor4 = 0; - /* receive threshold */ - info->cor3 = (info->default_threshold ? - info->default_threshold : baud_cor3[i]); - info->cor2 = CyETC; - switch (cflag & CSIZE) { - case CS5: - info->cor1 = Cy_5_BITS; - break; - case CS6: - info->cor1 = Cy_6_BITS; - break; - case CS7: - info->cor1 = Cy_7_BITS; - break; - case CS8: - info->cor1 = Cy_8_BITS; - break; - } - if (cflag & CSTOPB) - info->cor1 |= Cy_2_STOP; - - if (cflag & PARENB) { - if (cflag & PARODD) - info->cor1 |= CyPARITY_O; - else - info->cor1 |= CyPARITY_E; - } else - info->cor1 |= CyPARITY_NONE; - - /* CTS flow control flag */ - tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); - if (cflag & CRTSCTS) - info->cor2 |= CyCtsAE; - else - info->cor2 &= ~CyCtsAE; - tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); - - /*********************************************** - The hardware option, CyRtsAO, presents RTS when - the chip has characters to send. Since most modems - use RTS as reverse (inbound) flow control, this - option is not used. If inbound flow control is - necessary, DTR can be programmed to provide the - appropriate signals for use with a non-standard - cable. Contact Marcio Saito for details. - ***********************************************/ - - channel &= 0x03; - - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCAR, channel); - - /* tx and rx baud rate */ - - cyy_writeb(info, CyTCOR, info->tco); - cyy_writeb(info, CyTBPR, info->tbpr); - cyy_writeb(info, CyRCOR, info->rco); - cyy_writeb(info, CyRBPR, info->rbpr); - - /* set line characteristics according configuration */ - - cyy_writeb(info, CySCHR1, START_CHAR(tty)); - cyy_writeb(info, CySCHR2, STOP_CHAR(tty)); - cyy_writeb(info, CyCOR1, info->cor1); - cyy_writeb(info, CyCOR2, info->cor2); - cyy_writeb(info, CyCOR3, info->cor3); - cyy_writeb(info, CyCOR4, info->cor4); - cyy_writeb(info, CyCOR5, info->cor5); - - cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | - CyCOR3ch); - - /* !!! Is this needed? */ - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, CyRTPR, - (info->default_timeout ? info->default_timeout : 0x02)); - /* 10ms rx timeout */ - - cflags = CyCTS; - if (!C_CLOCAL(tty)) - cflags |= CyDSR | CyRI | CyDCD; - /* without modem intr */ - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh); - /* act on 1->0 modem transitions */ - if ((cflag & CRTSCTS) && info->rflow) - cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]); - else - cyy_writeb(info, CyMCOR1, cflags); - /* act on 0->1 modem transitions */ - cyy_writeb(info, CyMCOR2, cflags); - - if (i == 0) /* baud rate is zero, turn off line */ - cyy_change_rts_dtr(info, 0, TIOCM_DTR); - else - cyy_change_rts_dtr(info, TIOCM_DTR, 0); - - clear_bit(TTY_IO_ERROR, &tty->flags); - spin_unlock_irqrestore(&card->card_lock, flags); - - } else { - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - __u32 sw_flow; - int retval; - - if (!cyz_is_loaded(card)) - return; - - /* baud rate */ - baud = tty_get_baud_rate(tty); - if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - if (info->custom_divisor) - baud_rate = info->baud / info->custom_divisor; - else - baud_rate = info->baud; - } else if (baud > CYZ_MAX_SPEED) { - baud = CYZ_MAX_SPEED; - } - cy_writel(&ch_ctrl->comm_baud, baud); - - if (baud == 134) { - /* get it right for 134.5 baud */ - info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + - 2; - } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud_rate) + 2; - } else if (baud) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud) + 2; - /* this needs to be propagated into the card info */ - } else { - info->timeout = 0; - } - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5); - break; - case CS6: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6); - break; - case CS7: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7); - break; - case CS8: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8); - break; - } - if (cflag & CSTOPB) { - cy_writel(&ch_ctrl->comm_data_l, - readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); - } else { - cy_writel(&ch_ctrl->comm_data_l, - readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); - } - if (cflag & PARENB) { - if (cflag & PARODD) - cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); - else - cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); - } else - cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); - - /* CTS flow control flag */ - if (cflag & CRTSCTS) { - cy_writel(&ch_ctrl->hw_flow, - readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); - } else { - cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) & - ~(C_RS_CTS | C_RS_RTS)); - } - /* As the HW flow control is done in firmware, the driver - doesn't need to care about it */ - tty_port_set_cts_flow(&info->port, 0); - - /* XON/XOFF/XANY flow control flags */ - sw_flow = 0; - if (iflag & IXON) { - sw_flow |= C_FL_OXX; - if (iflag & IXANY) - sw_flow |= C_FL_OIXANY; - } - cy_writel(&ch_ctrl->sw_flow, sw_flow); - - retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " - "was %x\n", info->line, retval); - } - - /* CD sensitivity */ - tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); - - if (baud == 0) { /* baud rate is zero, turn off line */ - cy_writel(&ch_ctrl->rs_control, - readl(&ch_ctrl->rs_control) & ~C_RS_DTR); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); -#endif - } else { - cy_writel(&ch_ctrl->rs_control, - readl(&ch_ctrl->rs_control) | C_RS_DTR); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); -#endif - } - - retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " - "was %x\n", info->line, retval); - } - - clear_bit(TTY_IO_ERROR, &tty->flags); - } -} /* set_line_char */ - -static int cy_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *cinfo = info->card; - - if (serial_paranoia_check(info, tty->name, "cy_ioctl")) - return -ENODEV; - ss->type = info->type; - ss->line = info->line; - ss->port = (info->card - cy_card) * 0x100 + info->line - - cinfo->first_line; - ss->irq = cinfo->irq; - ss->flags = info->port.flags; - ss->close_delay = info->port.close_delay; - ss->closing_wait = info->port.closing_wait; - ss->baud_base = info->baud; - ss->custom_divisor = info->custom_divisor; - return 0; -} - -static int cy_set_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct cyclades_port *info = tty->driver_data; - int old_flags; - int ret; - - if (serial_paranoia_check(info, tty->name, "cy_ioctl")) - return -ENODEV; - - mutex_lock(&info->port.mutex); - - old_flags = info->port.flags; - - if (!capable(CAP_SYS_ADMIN)) { - if (ss->close_delay != info->port.close_delay || - ss->baud_base != info->baud || - (ss->flags & ASYNC_FLAGS & - ~ASYNC_USR_MASK) != - (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) - { - mutex_unlock(&info->port.mutex); - return -EPERM; - } - info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) | - (ss->flags & ASYNC_USR_MASK); - info->baud = ss->baud_base; - info->custom_divisor = ss->custom_divisor; - goto check_and_exit; - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud = ss->baud_base; - info->custom_divisor = ss->custom_divisor; - info->port.flags = (info->port.flags & ~ASYNC_FLAGS) | - (ss->flags & ASYNC_FLAGS); - info->port.close_delay = ss->close_delay * HZ / 100; - info->port.closing_wait = ss->closing_wait * HZ / 100; - -check_and_exit: - if (tty_port_initialized(&info->port)) { - if ((ss->flags ^ old_flags) & ASYNC_SPD_MASK) { - /* warn about deprecation unless clearing */ - if (ss->flags & ASYNC_SPD_MASK) - dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); - } - cy_set_line_char(info, tty); - ret = 0; - } else { - ret = cy_startup(info, tty); - } - mutex_unlock(&info->port.mutex); - return ret; -} /* set_serial_info */ - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) -{ - struct cyclades_card *card = info->card; - unsigned int result; - unsigned long flags; - u8 status; - - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty); - spin_unlock_irqrestore(&card->card_lock, flags); - result = (status ? 0 : TIOCSER_TEMT); - } else { - /* Not supported yet */ - return -EINVAL; - } - return put_user(result, value); -} - -static int cy_tiocmget(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - int result; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - card = info->card; - - if (!cy_is_Z(card)) { - unsigned long flags; - int channel = info->line - card->first_line; - u8 status; - - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - status = cyy_readb(info, CyMSVR1); - status |= cyy_readb(info, CyMSVR2); - spin_unlock_irqrestore(&card->card_lock, flags); - - if (info->rtsdtr_inv) { - result = ((status & CyRTS) ? TIOCM_DTR : 0) | - ((status & CyDTR) ? TIOCM_RTS : 0); - } else { - result = ((status & CyRTS) ? TIOCM_RTS : 0) | - ((status & CyDTR) ? TIOCM_DTR : 0); - } - result |= ((status & CyDCD) ? TIOCM_CAR : 0) | - ((status & CyRI) ? TIOCM_RNG : 0) | - ((status & CyDSR) ? TIOCM_DSR : 0) | - ((status & CyCTS) ? TIOCM_CTS : 0); - } else { - u32 lstatus; - - if (!cyz_is_loaded(card)) { - result = -ENODEV; - goto end; - } - - lstatus = readl(&info->u.cyz.ch_ctrl->rs_status); - result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | - ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | - ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | - ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) | - ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) | - ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); - } -end: - return result; -} /* cy_tiomget */ - -static int -cy_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - card = info->card; - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_change_rts_dtr(info, set, clear); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - int retval, channel = info->line - card->first_line; - u32 rs; - - if (!cyz_is_loaded(card)) - return -ENODEV; - - spin_lock_irqsave(&card->card_lock, flags); - rs = readl(&ch_ctrl->rs_control); - if (set & TIOCM_RTS) - rs |= C_RS_RTS; - if (clear & TIOCM_RTS) - rs &= ~C_RS_RTS; - if (set & TIOCM_DTR) { - rs |= C_RS_DTR; -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n"); -#endif - } - if (clear & TIOCM_DTR) { - rs &= ~C_RS_DTR; -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info clearing " - "Z DTR\n"); -#endif - } - cy_writel(&ch_ctrl->rs_control, rs); - retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); - spin_unlock_irqrestore(&card->card_lock, flags); - if (retval != 0) { - printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " - "was %x\n", info->line, retval); - } - } - return 0; -} - -/* - * cy_break() --- routine which turns the break handling on or off - */ -static int cy_break(struct tty_struct *tty, int break_state) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - int retval = 0; - - if (serial_paranoia_check(info, tty->name, "cy_break")) - return -EINVAL; - - card = info->card; - - spin_lock_irqsave(&card->card_lock, flags); - if (!cy_is_Z(card)) { - /* Let the transmit ISR take care of this (since it - requires stuffing characters into the output stream). - */ - if (break_state == -1) { - if (!info->breakon) { - info->breakon = 1; - if (!info->xmit_cnt) { - spin_unlock_irqrestore(&card->card_lock, flags); - start_xmit(info); - spin_lock_irqsave(&card->card_lock, flags); - } - } - } else { - if (!info->breakoff) { - info->breakoff = 1; - if (!info->xmit_cnt) { - spin_unlock_irqrestore(&card->card_lock, flags); - start_xmit(info); - spin_lock_irqsave(&card->card_lock, flags); - } - } - } - } else { - if (break_state == -1) { - retval = cyz_issue_cmd(card, - info->line - card->first_line, - C_CM_SET_BREAK, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:cy_break (set) retval on " - "ttyC%d was %x\n", info->line, retval); - } - } else { - retval = cyz_issue_cmd(card, - info->line - card->first_line, - C_CM_CLR_BREAK, 0L); - if (retval != 0) { - printk(KERN_DEBUG "cyc:cy_break (clr) retval " - "on ttyC%d was %x\n", info->line, - retval); - } - } - } - spin_unlock_irqrestore(&card->card_lock, flags); - return retval; -} /* cy_break */ - -static int set_threshold(struct cyclades_port *info, unsigned long value) -{ - struct cyclades_card *card = info->card; - unsigned long flags; - - if (!cy_is_Z(card)) { - info->cor3 &= ~CyREC_FIFO; - info->cor3 |= value & CyREC_FIFO; - - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCOR3, info->cor3); - cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch); - spin_unlock_irqrestore(&card->card_lock, flags); - } - return 0; -} /* set_threshold */ - -static int get_threshold(struct cyclades_port *info, - unsigned long __user *value) -{ - struct cyclades_card *card = info->card; - - if (!cy_is_Z(card)) { - u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO; - return put_user(tmp, value); - } - return 0; -} /* get_threshold */ - -static int set_timeout(struct cyclades_port *info, unsigned long value) -{ - struct cyclades_card *card = info->card; - unsigned long flags; - - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyRTPR, value & 0xff); - spin_unlock_irqrestore(&card->card_lock, flags); - } - return 0; -} /* set_timeout */ - -static int get_timeout(struct cyclades_port *info, - unsigned long __user *value) -{ - struct cyclades_card *card = info->card; - - if (!cy_is_Z(card)) { - u8 tmp = cyy_readb(info, CyRTPR); - return put_user(tmp, value); - } - return 0; -} /* get_timeout */ - -static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg, - struct cyclades_icount *cprev) -{ - struct cyclades_icount cnow; - unsigned long flags; - int ret; - - spin_lock_irqsave(&info->card->card_lock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->card->card_lock, flags); - - ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); - - *cprev = cnow; - - return ret; -} - -/* - * This routine allows the tty driver to implement device- - * specific ioctl's. If the ioctl number passed in cmd is - * not recognized by the driver, it should return ENOIOCTLCMD. - */ -static int -cy_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_icount cnow; /* kernel counter temps */ - int ret_val = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if (serial_paranoia_check(info, tty->name, "cy_ioctl")) - return -ENODEV; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", - info->line, cmd, arg); -#endif - - switch (cmd) { - case CYGETMON: - if (copy_to_user(argp, &info->mon, sizeof(info->mon))) { - ret_val = -EFAULT; - break; - } - memset(&info->mon, 0, sizeof(info->mon)); - break; - case CYGETTHRESH: - ret_val = get_threshold(info, argp); - break; - case CYSETTHRESH: - ret_val = set_threshold(info, arg); - break; - case CYGETDEFTHRESH: - ret_val = put_user(info->default_threshold, - (unsigned long __user *)argp); - break; - case CYSETDEFTHRESH: - info->default_threshold = arg & 0x0f; - break; - case CYGETTIMEOUT: - ret_val = get_timeout(info, argp); - break; - case CYSETTIMEOUT: - ret_val = set_timeout(info, arg); - break; - case CYGETDEFTIMEOUT: - ret_val = put_user(info->default_timeout, - (unsigned long __user *)argp); - break; - case CYSETDEFTIMEOUT: - info->default_timeout = arg & 0xff; - break; - case CYSETRFLOW: - info->rflow = (int)arg; - break; - case CYGETRFLOW: - ret_val = info->rflow; - break; - case CYSETRTSDTR_INV: - info->rtsdtr_inv = (int)arg; - break; - case CYGETRTSDTR_INV: - ret_val = info->rtsdtr_inv; - break; - case CYGETCD1400VER: - ret_val = info->chip_rev; - break; -#ifndef CONFIG_CYZ_INTR - case CYZSETPOLLCYCLE: - if (arg > LONG_MAX / HZ) - return -ENODEV; - cyz_polling_cycle = (arg * HZ) / 1000; - break; - case CYZGETPOLLCYCLE: - ret_val = (cyz_polling_cycle * 1000) / HZ; - break; -#endif /* CONFIG_CYZ_INTR */ - case CYSETWAIT: - info->port.closing_wait = (unsigned short)arg * HZ / 100; - break; - case CYGETWAIT: - ret_val = info->port.closing_wait / (HZ / 100); - break; - case TIOCSERGETLSR: /* Get line status register */ - ret_val = get_lsr_info(info, argp); - break; - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - spin_lock_irqsave(&info->card->card_lock, flags); - /* note the counters on entry */ - cnow = info->icount; - spin_unlock_irqrestore(&info->card->card_lock, flags); - ret_val = wait_event_interruptible(info->port.delta_msr_wait, - cy_cflags_changed(info, arg, &cnow)); - break; - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - default: - ret_val = -ENOIOCTLCMD; - } - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_ioctl done\n"); -#endif - return ret_val; -} /* cy_ioctl */ - -static int cy_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *sic) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_icount cnow; /* Used to snapshot */ - unsigned long flags; - - spin_lock_irqsave(&info->card->card_lock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->card->card_lock, flags); - - sic->cts = cnow.cts; - sic->dsr = cnow.dsr; - sic->rng = cnow.rng; - sic->dcd = cnow.dcd; - sic->rx = cnow.rx; - sic->tx = cnow.tx; - sic->frame = cnow.frame; - sic->overrun = cnow.overrun; - sic->parity = cnow.parity; - sic->brk = cnow.brk; - sic->buf_overrun = cnow.buf_overrun; - return 0; -} - -/* - * This routine allows the tty driver to be notified when - * device's termios settings have changed. Note that a - * well-designed tty driver should be prepared to accept the case - * where old == NULL, and try to do something rational. - */ -static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); -#endif - - cy_set_line_char(info, tty); - - if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; - cy_start(tty); - } -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty)) - wake_up_interruptible(&info->port.open_wait); -#endif -} /* cy_set_termios */ - -/* This function is used to send a high-priority XON/XOFF character to - the device. -*/ -static void cy_send_xchar(struct tty_struct *tty, char ch) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - int channel; - - if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) - return; - - info->x_char = ch; - - if (ch) - cy_start(tty); - - card = info->card; - channel = info->line - card->first_line; - - if (cy_is_Z(card)) { - if (ch == STOP_CHAR(tty)) - cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); - else if (ch == START_CHAR(tty)) - cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L); - } -} - -/* This routine is called by the upper-layer tty layer to signal - that incoming characters should be throttled because the input - buffers are close to full. - */ -static void cy_throttle(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - -#ifdef CY_DEBUG_THROTTLE - printk(KERN_DEBUG "cyc:throttle %s ...ttyC%d\n", tty_name(tty), - info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_throttle")) - return; - - card = info->card; - - if (I_IXOFF(tty)) { - if (!cy_is_Z(card)) - cy_send_xchar(tty, STOP_CHAR(tty)); - else - info->throttle = 1; - } - - if (C_CRTSCTS(tty)) { - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_change_rts_dtr(info, 0, TIOCM_RTS); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { - info->throttle = 1; - } - } -} /* cy_throttle */ - -/* - * This routine notifies the tty driver that it should signal - * that characters can now be sent to the tty without fear of - * overrunning the input buffers of the line disciplines. - */ -static void cy_unthrottle(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - -#ifdef CY_DEBUG_THROTTLE - printk(KERN_DEBUG "cyc:unthrottle %s ...ttyC%d\n", - tty_name(tty), info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - cy_send_xchar(tty, START_CHAR(tty)); - } - - if (C_CRTSCTS(tty)) { - card = info->card; - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_change_rts_dtr(info, TIOCM_RTS, 0); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { - info->throttle = 0; - } - } -} /* cy_unthrottle */ - -/* cy_start and cy_stop provide software output flow control as a - function of XON/XOFF, software CTS, and other such stuff. -*/ -static void cy_stop(struct tty_struct *tty) -{ - struct cyclades_card *cinfo; - struct cyclades_port *info = tty->driver_data; - int channel; - unsigned long flags; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_stop")) - return; - - cinfo = info->card; - channel = info->line - cinfo->first_line; - if (!cy_is_Z(cinfo)) { - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); - spin_unlock_irqrestore(&cinfo->card_lock, flags); - } -} /* cy_stop */ - -static void cy_start(struct tty_struct *tty) -{ - struct cyclades_card *cinfo; - struct cyclades_port *info = tty->driver_data; - int channel; - unsigned long flags; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_start")) - return; - - cinfo = info->card; - channel = info->line - cinfo->first_line; - if (!cy_is_Z(cinfo)) { - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); - spin_unlock_irqrestore(&cinfo->card_lock, flags); - } -} /* cy_start */ - -/* - * cy_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void cy_hangup(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_hangup")) - return; - - cy_flush_buffer(tty); - cy_shutdown(info, tty); - tty_port_hangup(&info->port); -} /* cy_hangup */ - -static int cyy_carrier_raised(struct tty_port *port) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *cinfo = info->card; - unsigned long flags; - int channel = info->line - cinfo->first_line; - u32 cd; - - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cd = cyy_readb(info, CyMSVR1) & CyDCD; - spin_unlock_irqrestore(&cinfo->card_lock, flags); - - return cd; -} - -static void cyy_dtr_rts(struct tty_port *port, int raise) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *cinfo = info->card; - unsigned long flags; - - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0, - raise ? 0 : TIOCM_RTS | TIOCM_DTR); - spin_unlock_irqrestore(&cinfo->card_lock, flags); -} - -static int cyz_carrier_raised(struct tty_port *port) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - - return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD; -} - -static void cyz_dtr_rts(struct tty_port *port, int raise) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *cinfo = info->card; - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - int ret, channel = info->line - cinfo->first_line; - u32 rs; - - rs = readl(&ch_ctrl->rs_control); - if (raise) - rs |= C_RS_RTS | C_RS_DTR; - else - rs &= ~(C_RS_RTS | C_RS_DTR); - cy_writel(&ch_ctrl->rs_control, rs); - ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L); - if (ret != 0) - printk(KERN_ERR "%s: retval on ttyC%d was %x\n", - __func__, info->line, ret); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "%s: raising Z DTR\n", __func__); -#endif -} - -static const struct tty_port_operations cyy_port_ops = { - .carrier_raised = cyy_carrier_raised, - .dtr_rts = cyy_dtr_rts, - .shutdown = cy_do_close, -}; - -static const struct tty_port_operations cyz_port_ops = { - .carrier_raised = cyz_carrier_raised, - .dtr_rts = cyz_dtr_rts, - .shutdown = cy_do_close, -}; - -/* - * --------------------------------------------------------------------- - * cy_init() and friends - * - * cy_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -static int cy_init_card(struct cyclades_card *cinfo) -{ - struct cyclades_port *info; - unsigned int channel, port; - - spin_lock_init(&cinfo->card_lock); - cinfo->intr_enabled = 0; - - cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports), - GFP_KERNEL); - if (cinfo->ports == NULL) { - printk(KERN_ERR "Cyclades: cannot allocate ports\n"); - return -ENOMEM; - } - - for (channel = 0, port = cinfo->first_line; channel < cinfo->nports; - channel++, port++) { - info = &cinfo->ports[channel]; - tty_port_init(&info->port); - info->magic = CYCLADES_MAGIC; - info->card = cinfo; - info->line = port; - - info->port.closing_wait = CLOSING_WAIT_DELAY; - info->port.close_delay = 5 * HZ / 10; - init_completion(&info->shutdown_wait); - - if (cy_is_Z(cinfo)) { - struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS; - struct ZFW_CTRL *zfw_ctrl; - - info->port.ops = &cyz_port_ops; - info->type = PORT_STARTECH; - - zfw_ctrl = cinfo->base_addr + - (readl(&firm_id->zfwctrl_addr) & 0xfffff); - info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel]; - info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; - - if (cinfo->hw_ver == ZO_V1) - info->xmit_fifo_size = CYZ_FIFO_SIZE; - else - info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; -#ifdef CONFIG_CYZ_INTR - timer_setup(&info->rx_full_timer, cyz_rx_restart, 0); -#endif - } else { - unsigned short chip_number; - int index = cinfo->bus_index; - - info->port.ops = &cyy_port_ops; - info->type = PORT_CIRRUS; - info->xmit_fifo_size = CyMAX_CHAR_FIFO; - info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; - info->cor2 = CyETC; - info->cor3 = 0x08; /* _very_ small rcv threshold */ - - chip_number = channel / CyPORTS_PER_CHIP; - info->u.cyy.base_addr = cinfo->base_addr + - (cy_chip_offset[chip_number] << index); - info->chip_rev = cyy_readb(info, CyGFRCR); - - if (info->chip_rev >= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[13]; /* Tx BPR */ - info->tco = baud_co_60[13]; /* Tx CO */ - info->rbpr = baud_bpr_60[13]; /* Rx BPR */ - info->rco = baud_co_60[13]; /* Rx CO */ - info->rtsdtr_inv = 1; - } else { - info->tbpr = baud_bpr_25[13]; /* Tx BPR */ - info->tco = baud_co_25[13]; /* Tx CO */ - info->rbpr = baud_bpr_25[13]; /* Rx BPR */ - info->rco = baud_co_25[13]; /* Rx CO */ - info->rtsdtr_inv = 0; - } - info->read_status_mask = CyTIMEOUT | CySPECHAR | - CyBREAK | CyPARITY | CyFRAME | CyOVERRUN; - } - - } - -#ifndef CONFIG_CYZ_INTR - if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) { - mod_timer(&cyz_timerlist, jiffies + 1); -#ifdef CY_PCI_DEBUG - printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); -#endif - } -#endif - return 0; -} - -/* initialize chips on Cyclom-Y card -- return number of valid - chips (which is number of ports/4) */ -static unsigned short cyy_init_card(void __iomem *true_base_addr, - int index) -{ - unsigned int chip_number; - void __iomem *base_addr; - - cy_writeb(true_base_addr + (Cy_HwReset << index), 0); - /* Cy_HwReset is 0x1400 */ - cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - udelay(500L); - - for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; - chip_number++) { - base_addr = - true_base_addr + (cy_chip_offset[chip_number] << index); - mdelay(1); - if (readb(base_addr + (CyCCR << index)) != 0x00) { - /************* - printk(" chip #%d at %#6lx is never idle (CCR != 0)\n", - chip_number, (unsigned long)base_addr); - *************/ - return chip_number; - } - - cy_writeb(base_addr + (CyGFRCR << index), 0); - udelay(10L); - - /* The Cyclom-16Y does not decode address bit 9 and therefore - cannot distinguish between references to chip 0 and a non- - existent chip 4. If the preceding clearing of the supposed - chip 4 GFRCR register appears at chip 0, there is no chip 4 - and this must be a Cyclom-16Y, not a Cyclom-32Ye. - */ - if (chip_number == 4 && readb(true_base_addr + - (cy_chip_offset[0] << index) + - (CyGFRCR << index)) == 0) { - return chip_number; - } - - cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET); - mdelay(1); - - if (readb(base_addr + (CyGFRCR << index)) == 0x00) { - /* - printk(" chip #%d at %#6lx is not responding ", - chip_number, (unsigned long)base_addr); - printk("(GFRCR stayed 0)\n", - */ - return chip_number; - } - if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) != - 0x40) { - /* - printk(" chip #%d at %#6lx is not valid (GFRCR == " - "%#2x)\n", - chip_number, (unsigned long)base_addr, - base_addr[CyGFRCR<= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - /* Impossible to reach 5ms with this chip. - Changed to 2ms instead (f = 500 Hz). */ - cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS); - } else { - /* f = 200 Hz */ - cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS); - } - - /* - printk(" chip #%d at %#6lx is rev 0x%2x\n", - chip_number, (unsigned long)base_addr, - readb(base_addr+(CyGFRCR< NR_PORTS) { - printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " - "more channels are available. Change NR_PORTS " - "in cyclades.c and recompile kernel.\n", - (unsigned long)cy_isa_address); - iounmap(cy_isa_address); - return nboard; - } - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - card = &cy_card[j]; - if (card->base_addr == NULL) - break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " - "more cards can be used. Change NR_CARDS in " - "cyclades.c and recompile kernel.\n", - (unsigned long)cy_isa_address); - iounmap(cy_isa_address); - return nboard; - } - - /* allocate IRQ */ - if (request_irq(cy_isa_irq, cyy_interrupt, - 0, "Cyclom-Y", card)) { - printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " - "could not allocate IRQ#%d.\n", - (unsigned long)cy_isa_address, cy_isa_irq); - iounmap(cy_isa_address); - return nboard; - } - - /* set cy_card */ - card->base_addr = cy_isa_address; - card->ctl_addr.p9050 = NULL; - card->irq = (int)cy_isa_irq; - card->bus_index = 0; - card->first_line = cy_next_channel; - card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; - card->nports = cy_isa_nchan; - if (cy_init_card(card)) { - card->base_addr = NULL; - free_irq(cy_isa_irq, card); - iounmap(cy_isa_address); - continue; - } - nboard++; - - printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " - "%d channels starting from port %d\n", - j + 1, (unsigned long)cy_isa_address, - (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), - cy_isa_irq, cy_isa_nchan, cy_next_channel); - - for (k = 0, j = cy_next_channel; - j < cy_next_channel + cy_isa_nchan; j++, k++) - tty_port_register_device(&card->ports[k].port, - cy_serial_driver, j, NULL); - cy_next_channel += cy_isa_nchan; - } - return nboard; -#else - return 0; -#endif /* CONFIG_ISA */ -} /* cy_detect_isa */ - -#ifdef CONFIG_PCI -static inline int cyc_isfwstr(const char *str, unsigned int size) -{ - unsigned int a; - - for (a = 0; a < size && *str; a++, str++) - if (*str & 0x80) - return -EINVAL; - - for (; a < size; a++, str++) - if (*str) - return -EINVAL; - - return 0; -} - -static inline void cyz_fpga_copy(void __iomem *fpga, const u8 *data, - unsigned int size) -{ - for (; size > 0; size--) { - cy_writel(fpga, *data++); - udelay(10); - } -} - -static void plx_init(struct pci_dev *pdev, int irq, - struct RUNTIME_9060 __iomem *addr) -{ - /* Reset PLX */ - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000); - udelay(100L); - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000); - - /* Reload Config. Registers from EEPROM */ - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000); - udelay(100L); - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000); - - /* For some yet unknown reason, once the PLX9060 reloads the EEPROM, - * the IRQ is lost and, thus, we have to re-write it to the PCI config. - * registers. This will remain here until we find a permanent fix. - */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); -} - -static int __cyz_load_fw(const struct firmware *fw, - const char *name, const u32 mailbox, void __iomem *base, - void __iomem *fpga) -{ - const void *ptr = fw->data; - const struct zfile_header *h = ptr; - const struct zfile_config *c, *cs; - const struct zfile_block *b, *bs; - unsigned int a, tmp, len = fw->size; -#define BAD_FW KERN_ERR "Bad firmware: " - if (len < sizeof(*h)) { - printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h)); - return -EINVAL; - } - - cs = ptr + h->config_offset; - bs = ptr + h->block_offset; - - if ((void *)(cs + h->n_config) > ptr + len || - (void *)(bs + h->n_blocks) > ptr + len) { - printk(BAD_FW "too short"); - return -EINVAL; - } - - if (cyc_isfwstr(h->name, sizeof(h->name)) || - cyc_isfwstr(h->date, sizeof(h->date))) { - printk(BAD_FW "bad formatted header string\n"); - return -EINVAL; - } - - if (strncmp(name, h->name, sizeof(h->name))) { - printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name); - return -EINVAL; - } - - tmp = 0; - for (c = cs; c < cs + h->n_config; c++) { - for (a = 0; a < c->n_blocks; a++) - if (c->block_list[a] > h->n_blocks) { - printk(BAD_FW "bad block ref number in cfgs\n"); - return -EINVAL; - } - if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */ - tmp++; - } - if (!tmp) { - printk(BAD_FW "nothing appropriate\n"); - return -EINVAL; - } - - for (b = bs; b < bs + h->n_blocks; b++) - if (b->file_offset + b->size > len) { - printk(BAD_FW "bad block data offset\n"); - return -EINVAL; - } - - /* everything is OK, let's seek'n'load it */ - for (c = cs; c < cs + h->n_config; c++) - if (c->mailbox == mailbox && c->function == 0) - break; - - for (a = 0; a < c->n_blocks; a++) { - b = &bs[c->block_list[a]]; - if (b->type == ZBLOCK_FPGA) { - if (fpga != NULL) - cyz_fpga_copy(fpga, ptr + b->file_offset, - b->size); - } else { - if (base != NULL) - memcpy_toio(base + b->ram_offset, - ptr + b->file_offset, b->size); - } - } -#undef BAD_FW - return 0; -} - -static int cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, - struct RUNTIME_9060 __iomem *ctl_addr, int irq) -{ - const struct firmware *fw; - struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS; - struct CUSTOM_REG __iomem *cust = base_addr; - struct ZFW_CTRL __iomem *pt_zfwctrl; - void __iomem *tmp; - u32 mailbox, status, nchan; - unsigned int i; - int retval; - - retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev); - if (retval) { - dev_err(&pdev->dev, "can't get firmware\n"); - goto err; - } - - /* Check whether the firmware is already loaded and running. If - positive, skip this board */ - if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { - u32 cntval = readl(base_addr + 0x190); - - udelay(100); - if (cntval != readl(base_addr + 0x190)) { - /* FW counter is working, FW is running */ - dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. " - "Skipping board.\n"); - retval = 0; - goto err_rel; - } - } - - /* start boot */ - cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) & - ~0x00030800UL); - - mailbox = readl(&ctl_addr->mail_box_0); - - if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) { - /* stops CPU and set window to beginning of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - cy_writel(&cust->cpu_stop, 0); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - udelay(100); - } - - plx_init(pdev, irq, ctl_addr); - - if (mailbox != 0) { - /* load FPGA */ - retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL, - base_addr); - if (retval) - goto err_rel; - if (!__cyz_fpga_loaded(ctl_addr)) { - dev_err(&pdev->dev, "fw upload successful, but fw is " - "not loaded\n"); - goto err_rel; - } - } - - /* stops CPU and set window to beginning of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - cy_writel(&cust->cpu_stop, 0); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - udelay(100); - - /* clear memory */ - for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) - cy_writeb(tmp, 255); - if (mailbox != 0) { - /* set window to last 512K of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE); - for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) - cy_writeb(tmp, 255); - /* set window to beginning of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - } - - retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL); - release_firmware(fw); - if (retval) - goto err; - - /* finish boot and start boards */ - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - cy_writel(&cust->cpu_start, 0); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - i = 0; - while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40) - msleep(100); - if (status != ZFIRM_ID) { - if (status == ZFIRM_HLT) { - dev_err(&pdev->dev, "you need an external power supply " - "for this number of ports. Firmware halted and " - "board reset.\n"); - retval = -EIO; - goto err; - } - dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting " - "some more time\n", status); - while ((status = readl(&fid->signature)) != ZFIRM_ID && - i++ < 200) - msleep(100); - if (status != ZFIRM_ID) { - dev_err(&pdev->dev, "Board not started in 20 seconds! " - "Giving up. (fid->signature = 0x%x)\n", - status); - dev_info(&pdev->dev, "*** Warning ***: if you are " - "upgrading the FW, please power cycle the " - "system before loading the new FW to the " - "Cyclades-Z.\n"); - - if (__cyz_fpga_loaded(ctl_addr)) - plx_init(pdev, irq, ctl_addr); - - retval = -EIO; - goto err; - } - dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n", - i / 10); - } - pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr); - - dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n", - base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), - base_addr + readl(&fid->zfwctrl_addr)); - - nchan = readl(&pt_zfwctrl->board_ctrl.n_channel); - dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", - readl(&pt_zfwctrl->board_ctrl.fw_version), nchan); - - if (nchan == 0) { - dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " - "check the connection between the Z host card and the " - "serial expanders.\n"); - - if (__cyz_fpga_loaded(ctl_addr)) - plx_init(pdev, irq, ctl_addr); - - dev_info(&pdev->dev, "Null number of ports detected. Board " - "reset.\n"); - retval = 0; - goto err; - } - - cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX); - cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION); - - /* - Early firmware failed to start looking for commands. - This enables firmware interrupts for those commands. - */ - cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | - (1 << 17)); - cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | - 0x00030800UL); - - return nchan; -err_rel: - release_firmware(fw); -err: - return retval; -} - -static int cy_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct cyclades_card *card; - void __iomem *addr0 = NULL, *addr2 = NULL; - char *card_name = NULL; - u32 mailbox; - unsigned int device_id, nchan = 0, card_no, i, j; - unsigned char plx_ver; - int retval, irq; - - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "cannot enable device\n"); - goto err; - } - - /* read PCI configuration area */ - irq = pdev->irq; - device_id = pdev->device & ~PCI_DEVICE_ID_MASK; - -#if defined(__alpha__) - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ - dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " - "addresses on Alpha systems.\n"); - retval = -EIO; - goto err_dis; - } -#endif - if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { - dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " - "addresses\n"); - retval = -EIO; - goto err_dis; - } - - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " - "it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } - - retval = pci_request_regions(pdev, "cyclades"); - if (retval) { - dev_err(&pdev->dev, "failed to reserve resources\n"); - goto err_dis; - } - - retval = -EIO; - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || - device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { - card_name = "Cyclom-Y"; - - addr0 = ioremap(pci_resource_start(pdev, 0), - CyPCI_Yctl); - if (addr0 == NULL) { - dev_err(&pdev->dev, "can't remap ctl region\n"); - goto err_reg; - } - addr2 = ioremap(pci_resource_start(pdev, 2), - CyPCI_Ywin); - if (addr2 == NULL) { - dev_err(&pdev->dev, "can't remap base region\n"); - goto err_unmap; - } - - nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); - if (nchan == 0) { - dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " - "Serial-Modules\n"); - goto err_unmap; - } - } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { - struct RUNTIME_9060 __iomem *ctl_addr; - - ctl_addr = addr0 = ioremap(pci_resource_start(pdev, 0), - CyPCI_Zctl); - if (addr0 == NULL) { - dev_err(&pdev->dev, "can't remap ctl region\n"); - goto err_reg; - } - - /* Disable interrupts on the PLX before resetting it */ - cy_writew(&ctl_addr->intr_ctrl_stat, - readw(&ctl_addr->intr_ctrl_stat) & ~0x0900); - - plx_init(pdev, irq, addr0); - - mailbox = readl(&ctl_addr->mail_box_0); - - addr2 = ioremap(pci_resource_start(pdev, 2), - mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin); - if (addr2 == NULL) { - dev_err(&pdev->dev, "can't remap base region\n"); - goto err_unmap; - } - - if (mailbox == ZE_V1) { - card_name = "Cyclades-Ze"; - } else { - card_name = "Cyclades-8Zo"; -#ifdef CY_PCI_DEBUG - if (mailbox == ZO_V1) { - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " - "id %lx, ver %lx\n", (ulong)(0xff & - readl(&((struct CUSTOM_REG *)addr2)-> - fpga_id)), (ulong)(0xff & - readl(&((struct CUSTOM_REG *)addr2)-> - fpga_version))); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - } else { - dev_info(&pdev->dev, "Cyclades-Z/PCI: New " - "Cyclades-Z board. FPGA not loaded\n"); - } -#endif - /* The following clears the firmware id word. This - ensures that the driver will not attempt to talk to - the board until it has been properly initialized. - */ - if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) - cy_writel(addr2 + ID_ADDRESS, 0L); - } - - retval = cyz_load_fw(pdev, addr2, addr0, irq); - if (retval <= 0) - goto err_unmap; - nchan = retval; - } - - if ((cy_next_channel + nchan) > NR_PORTS) { - dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " - "channels are available. Change NR_PORTS in " - "cyclades.c and recompile kernel.\n"); - goto err_unmap; - } - /* fill the next cy_card structure available */ - for (card_no = 0; card_no < NR_CARDS; card_no++) { - card = &cy_card[card_no]; - if (card->base_addr == NULL) - break; - } - if (card_no == NR_CARDS) { /* no more cy_cards available */ - dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " - "more cards can be used. Change NR_CARDS in " - "cyclades.c and recompile kernel.\n"); - goto err_unmap; - } - - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || - device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { - /* allocate IRQ */ - retval = request_irq(irq, cyy_interrupt, - IRQF_SHARED, "Cyclom-Y", card); - if (retval) { - dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto err_unmap; - } - card->num_chips = nchan / CyPORTS_PER_CHIP; - } else { - struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS; - struct ZFW_CTRL __iomem *zfw_ctrl; - - zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - - card->hw_ver = mailbox; - card->num_chips = (unsigned int)-1; - card->board_ctrl = &zfw_ctrl->board_ctrl; -#ifdef CONFIG_CYZ_INTR - /* allocate IRQ only if board has an IRQ */ - if (irq != 0 && irq != 255) { - retval = request_irq(irq, cyz_interrupt, - IRQF_SHARED, "Cyclades-Z", card); - if (retval) { - dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto err_unmap; - } - } -#endif /* CONFIG_CYZ_INTR */ - } - - /* set cy_card */ - card->base_addr = addr2; - card->ctl_addr.p9050 = addr0; - card->irq = irq; - card->bus_index = 1; - card->first_line = cy_next_channel; - card->nports = nchan; - retval = cy_init_card(card); - if (retval) - goto err_null; - - pci_set_drvdata(pdev, card); - - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || - device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { - /* enable interrupts in the PCI interface */ - plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; - switch (plx_ver) { - case PLX_9050: - cy_writeb(addr0 + 0x4c, 0x43); - break; - - case PLX_9060: - case PLX_9080: - default: /* Old boards, use PLX_9060 */ - { - struct RUNTIME_9060 __iomem *ctl_addr = addr0; - plx_init(pdev, irq, ctl_addr); - cy_writew(&ctl_addr->intr_ctrl_stat, - readw(&ctl_addr->intr_ctrl_stat) | 0x0900); - break; - } - } - } - - dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " - "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); - for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++) - tty_port_register_device(&card->ports[j].port, - cy_serial_driver, i, &pdev->dev); - cy_next_channel += nchan; - - return 0; -err_null: - card->base_addr = NULL; - free_irq(irq, card); -err_unmap: - iounmap(addr0); - if (addr2) - iounmap(addr2); -err_reg: - pci_release_regions(pdev); -err_dis: - pci_disable_device(pdev); -err: - return retval; -} - -static void cy_pci_remove(struct pci_dev *pdev) -{ - struct cyclades_card *cinfo = pci_get_drvdata(pdev); - unsigned int i, channel; - - /* non-Z with old PLX */ - if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == - PLX_9050) - cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); - else -#ifndef CONFIG_CYZ_INTR - if (!cy_is_Z(cinfo)) -#endif - cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, - readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & - ~0x0900); - - iounmap(cinfo->base_addr); - if (cinfo->ctl_addr.p9050) - iounmap(cinfo->ctl_addr.p9050); - if (cinfo->irq -#ifndef CONFIG_CYZ_INTR - && !cy_is_Z(cinfo) -#endif /* CONFIG_CYZ_INTR */ - ) - free_irq(cinfo->irq, cinfo); - pci_release_regions(pdev); - - cinfo->base_addr = NULL; - for (channel = 0, i = cinfo->first_line; i < cinfo->first_line + - cinfo->nports; i++, channel++) { - tty_unregister_device(cy_serial_driver, i); - tty_port_destroy(&cinfo->ports[channel].port); - } - cinfo->nports = 0; - kfree(cinfo->ports); -} - -static struct pci_driver cy_pci_driver = { - .name = "cyclades", - .id_table = cy_pci_dev_id, - .probe = cy_pci_probe, - .remove = cy_pci_remove -}; -#endif - -static int cyclades_proc_show(struct seq_file *m, void *v) -{ - struct cyclades_port *info; - unsigned int i, j; - __u32 cur_jifs = jiffies; - - seq_puts(m, "Dev TimeOpen BytesOut IdleOut BytesIn " - "IdleIn Overruns Ldisc\n"); - - /* Output one line for each known port */ - for (i = 0; i < NR_CARDS; i++) - for (j = 0; j < cy_card[i].nports; j++) { - info = &cy_card[i].ports[j]; - - if (info->port.count) { - /* XXX is the ldisc num worth this? */ - struct tty_struct *tty; - struct tty_ldisc *ld; - int num = 0; - tty = tty_port_tty_get(&info->port); - if (tty) { - ld = tty_ldisc_ref(tty); - if (ld) { - num = ld->ops->num; - tty_ldisc_deref(ld); - } - tty_kref_put(tty); - } - seq_printf(m, "%3d %8lu %10lu %8lu " - "%10lu %8lu %9lu %6d\n", info->line, - (cur_jifs - info->idle_stats.in_use) / - HZ, info->idle_stats.xmit_bytes, - (cur_jifs - info->idle_stats.xmit_idle)/ - HZ, info->idle_stats.recv_bytes, - (cur_jifs - info->idle_stats.recv_idle)/ - HZ, info->idle_stats.overruns, - num); - } else - seq_printf(m, "%3d %8lu %10lu %8lu " - "%10lu %8lu %9lu %6ld\n", - info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); - } - return 0; -} - -/* The serial driver boot-time initialization code! - Hardware I/O ports are mapped to character special devices on a - first found, first allocated manner. That is, this code searches - for Cyclom cards in the system. As each is found, it is probed - to discover how many chips (and thus how many ports) are present. - These ports are mapped to the tty ports 32 and upward in monotonic - fashion. If an 8-port card is replaced with a 16-port card, the - port mapping on a following card will shift. - - This approach is different from what is used in the other serial - device driver because the Cyclom is more properly a multiplexer, - not just an aggregation of serial ports on one card. - - If there are more cards with more ports than have been - statically allocated above, a warning is printed and the - extra ports are ignored. - */ - -static const struct tty_operations cy_ops = { - .open = cy_open, - .close = cy_close, - .write = cy_write, - .put_char = cy_put_char, - .flush_chars = cy_flush_chars, - .write_room = cy_write_room, - .chars_in_buffer = cy_chars_in_buffer, - .flush_buffer = cy_flush_buffer, - .ioctl = cy_ioctl, - .throttle = cy_throttle, - .unthrottle = cy_unthrottle, - .set_termios = cy_set_termios, - .stop = cy_stop, - .start = cy_start, - .hangup = cy_hangup, - .break_ctl = cy_break, - .wait_until_sent = cy_wait_until_sent, - .tiocmget = cy_tiocmget, - .tiocmset = cy_tiocmset, - .get_icount = cy_get_icount, - .set_serial = cy_set_serial_info, - .get_serial = cy_get_serial_info, - .proc_show = cyclades_proc_show, -}; - -static int __init cy_init(void) -{ - unsigned int nboards; - int retval = -ENOMEM; - - cy_serial_driver = alloc_tty_driver(NR_PORTS); - if (!cy_serial_driver) - goto err; - - printk(KERN_INFO "Cyclades driver " CY_VERSION "\n"); - - /* Initialize the tty_driver structure */ - - cy_serial_driver->driver_name = "cyclades"; - cy_serial_driver->name = "ttyC"; - cy_serial_driver->major = CYCLADES_MAJOR; - cy_serial_driver->minor_start = 0; - cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; - cy_serial_driver->init_termios = tty_std_termios; - cy_serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(cy_serial_driver, &cy_ops); - - retval = tty_register_driver(cy_serial_driver); - if (retval) { - printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); - goto err_frtty; - } - - /* the code below is responsible to find the boards. Each different - type of board has its own detection routine. If a board is found, - the next cy_card structure available is set by the detection - routine. These functions are responsible for checking the - availability of cy_card and cy_port data structures and updating - the cy_next_channel. */ - - /* look for isa boards */ - nboards = cy_detect_isa(); - -#ifdef CONFIG_PCI - /* look for pci boards */ - retval = pci_register_driver(&cy_pci_driver); - if (retval && !nboards) { - tty_unregister_driver(cy_serial_driver); - goto err_frtty; - } -#endif - - return 0; -err_frtty: - put_tty_driver(cy_serial_driver); -err: - return retval; -} /* cy_init */ - -static void __exit cy_cleanup_module(void) -{ - struct cyclades_card *card; - unsigned int i, e1; - -#ifndef CONFIG_CYZ_INTR - del_timer_sync(&cyz_timerlist); -#endif /* CONFIG_CYZ_INTR */ - - e1 = tty_unregister_driver(cy_serial_driver); - if (e1) - printk(KERN_ERR "failed to unregister Cyclades serial " - "driver(%d)\n", e1); - -#ifdef CONFIG_PCI - pci_unregister_driver(&cy_pci_driver); -#endif - - for (i = 0; i < NR_CARDS; i++) { - card = &cy_card[i]; - if (card->base_addr) { - /* clear interrupt */ - cy_writeb(card->base_addr + Cy_ClrIntr, 0); - iounmap(card->base_addr); - if (card->ctl_addr.p9050) - iounmap(card->ctl_addr.p9050); - if (card->irq -#ifndef CONFIG_CYZ_INTR - && !cy_is_Z(card) -#endif /* CONFIG_CYZ_INTR */ - ) - free_irq(card->irq, card); - for (e1 = card->first_line; e1 < card->first_line + - card->nports; e1++) - tty_unregister_device(cy_serial_driver, e1); - kfree(card->ports); - } - } - - put_tty_driver(cy_serial_driver); -} /* cy_cleanup_module */ - -module_init(cy_init); -module_exit(cy_cleanup_module); - -MODULE_LICENSE("GPL"); -MODULE_VERSION(CY_VERSION); -MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR); -MODULE_FIRMWARE("cyzfirm.bin"); diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c index a4c9913f76a0..ff0dcc56413c 100644 --- a/drivers/tty/hvc/hvc_udbg.c +++ b/drivers/tty/hvc/hvc_udbg.c @@ -17,7 +17,7 @@ #include "hvc_console.h" -struct hvc_struct *hvc_udbg_dev; +static struct hvc_struct *hvc_udbg_dev; static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count) { diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 9afa1dcef2c2..197988c55e0c 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -290,35 +290,11 @@ static LIST_HEAD(hvcs_structs); static DEFINE_SPINLOCK(hvcs_structs_lock); static DEFINE_MUTEX(hvcs_init_mutex); -static void hvcs_unthrottle(struct tty_struct *tty); -static void hvcs_throttle(struct tty_struct *tty); -static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance); - -static int hvcs_write(struct tty_struct *tty, - const unsigned char *buf, int count); -static int hvcs_write_room(struct tty_struct *tty); -static int hvcs_chars_in_buffer(struct tty_struct *tty); - -static int hvcs_has_pi(struct hvcs_struct *hvcsd); -static void hvcs_set_pi(struct hvcs_partner_info *pi, - struct hvcs_struct *hvcsd); static int hvcs_get_pi(struct hvcs_struct *hvcsd); static int hvcs_rescan_devices_list(void); -static int hvcs_partner_connect(struct hvcs_struct *hvcsd); static void hvcs_partner_free(struct hvcs_struct *hvcsd); -static int hvcs_enable_device(struct hvcs_struct *hvcsd, - uint32_t unit_address, unsigned int irq, struct vio_dev *dev); - -static int hvcs_open(struct tty_struct *tty, struct file *filp); -static void hvcs_close(struct tty_struct *tty, struct file *filp); -static void hvcs_hangup(struct tty_struct * tty); - -static int hvcs_probe(struct vio_dev *dev, - const struct vio_device_id *id); -static int __init hvcs_module_init(void); -static void __exit hvcs_module_exit(void); static int hvcs_initialize(void); #define HVCS_SCHED_READ 0x00000001 diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index 6dacbc5e286c..99bb2f149ff5 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -235,10 +235,10 @@ static int ipw_write_room(struct tty_struct *linux_tty) /* FIXME: Exactly how is the tty object locked here .. */ if (!tty) - return -ENODEV; + return 0; if (!tty->port.count) - return -EINVAL; + return 0; room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; if (room < 0) @@ -596,13 +596,8 @@ int ipwireless_tty_init(void) void ipwireless_tty_release(void) { - int ret; - - ret = tty_unregister_driver(ipw_tty_driver); + tty_unregister_driver(ipw_tty_driver); put_tty_driver(ipw_tty_driver); - if (ret != 0) - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": tty_unregister_driver failed with code %d\n", ret); } int ipwireless_tty_is_modem(struct ipw_tty *tty) diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c deleted file mode 100644 index 3b2f9fb01aa0..000000000000 --- a/drivers/tty/isicom.c +++ /dev/null @@ -1,1699 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Original driver code supplied by Multi-Tech - * - * Changes - * 1/9/98 alan@lxorguk.ukuu.org.uk - * Merge to 2.0.x kernel tree - * Obtain and use official major/minors - * Loader switched to a misc device - * (fixed range check bug as a side effect) - * Printk clean up - * 9/12/98 alan@lxorguk.ukuu.org.uk - * Rough port to 2.1.x - * - * 10/6/99 sameer Merged the ISA and PCI drivers to - * a new unified driver. - * - * 3/9/99 sameer Added support for ISI4616 cards. - * - * 16/9/99 sameer We do not force RTS low anymore. - * This is to prevent the firmware - * from getting confused. - * - * 26/10/99 sameer Cosmetic changes:The driver now - * dumps the Port Count information - * along with I/O address and IRQ. - * - * 13/12/99 sameer Fixed the problem with IRQ sharing. - * - * 10/5/00 sameer Fixed isicom_shutdown_board() - * to not lower DTR on all the ports - * when the last port on the card is - * closed. - * - * 10/5/00 sameer Signal mask setup command added - * to isicom_setup_port and - * isicom_shutdown_port. - * - * 24/5/00 sameer The driver is now SMP aware. - * - * - * 27/11/00 Vinayak P Risbud Fixed the Driver Crash Problem - * - * - * 03/01/01 anil .s Added support for resetting the - * internal modems on ISI cards. - * - * 08/02/01 anil .s Upgraded the driver for kernel - * 2.4.x - * - * 11/04/01 Kevin Fixed firmware load problem with - * ISIHP-4X card - * - * 30/04/01 anil .s Fixed the remote login through - * ISI port problem. Now the link - * does not go down before password - * prompt. - * - * 03/05/01 anil .s Fixed the problem with IRQ sharing - * among ISI-PCI cards. - * - * 03/05/01 anil .s Added support to display the version - * info during insmod as well as module - * listing by lsmod. - * - * 10/05/01 anil .s Done the modifications to the source - * file and Install script so that the - * same installation can be used for - * 2.2.x and 2.4.x kernel. - * - * 06/06/01 anil .s Now we drop both dtr and rts during - * shutdown_port as well as raise them - * during isicom_config_port. - * - * 09/06/01 acme@conectiva.com.br use capable, not suser, do - * restore_flags on failure in - * isicom_send_break, verify put_user - * result - * - * 11/02/03 ranjeeth Added support for 230 Kbps and 460 Kbps - * Baud index extended to 21 - * - * 20/03/03 ranjeeth Made to work for Linux Advanced server. - * Taken care of license warning. - * - * 10/12/03 Ravindra Made to work for Fedora Core 1 of - * Red Hat Distribution - * - * 06/01/05 Alan Cox Merged the ISI and base kernel strands - * into a single 2.6 driver - * - * *********************************************************** - * - * To use this driver you also need the support package. You - * can find this in RPM format on - * ftp://ftp.linux.org.uk/pub/linux/alan - * - * You can find the original tools for this direct from Multitech - * ftp://ftp.multitech.com/ISI-Cards/ - * - * Having installed the cards the module options (/etc/modprobe.d/) - * - * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 - * - * Omit those entries for boards you don't have installed. - * - * TODO - * Merge testing - * 64-bit verification - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include - -#define InterruptTheCard(base) outw(0, (base) + 0xc) -#define ClearInterrupt(base) inw((base) + 0x0a) - -#ifdef DEBUG -#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c)) -#else -#define isicom_paranoia_check(a, b, c) 0 -#endif - -static int isicom_probe(struct pci_dev *, const struct pci_device_id *); -static void isicom_remove(struct pci_dev *); - -static const struct pci_device_id isicom_pci_tbl[] = { - { PCI_DEVICE(VENDOR_ID, 0x2028) }, - { PCI_DEVICE(VENDOR_ID, 0x2051) }, - { PCI_DEVICE(VENDOR_ID, 0x2052) }, - { PCI_DEVICE(VENDOR_ID, 0x2053) }, - { PCI_DEVICE(VENDOR_ID, 0x2054) }, - { PCI_DEVICE(VENDOR_ID, 0x2055) }, - { PCI_DEVICE(VENDOR_ID, 0x2056) }, - { PCI_DEVICE(VENDOR_ID, 0x2057) }, - { PCI_DEVICE(VENDOR_ID, 0x2058) }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, isicom_pci_tbl); - -static struct pci_driver isicom_driver = { - .name = "isicom", - .id_table = isicom_pci_tbl, - .probe = isicom_probe, - .remove = isicom_remove -}; - -static int prev_card = 3; /* start servicing isi_card[0] */ -static struct tty_driver *isicom_normal; - -static void isicom_tx(struct timer_list *unused); -static void isicom_start(struct tty_struct *tty); - -static DEFINE_TIMER(tx, isicom_tx); - -/* baud index mappings from linux defns to isi */ - -static signed char linuxb_to_isib[] = { - -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21 -}; - -struct isi_board { - unsigned long base; - int irq; - unsigned char port_count; - unsigned short status; - unsigned short port_status; /* each bit for each port */ - unsigned short shift_count; - struct isi_port *ports; - signed char count; - spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */ - unsigned long flags; - unsigned int index; -}; - -struct isi_port { - unsigned short magic; - struct tty_port port; - u16 channel; - u16 status; - struct isi_board *card; - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; -}; - -static struct isi_board isi_card[BOARD_COUNT]; -static struct isi_port isi_ports[PORT_COUNT]; - -/* - * Locking functions for card level locking. We need to own both - * the kernel lock for the card and have the card in a position that - * it wants to talk. - */ - -static int WaitTillCardIsFree(unsigned long base) -{ - unsigned int count = 0; - - while (!(inw(base + 0xe) & 0x1) && count++ < 100) - mdelay(1); - - return !(inw(base + 0xe) & 0x1); -} - -static int lock_card(struct isi_board *card) -{ - unsigned long base = card->base; - unsigned int retries, a; - - for (retries = 0; retries < 10; retries++) { - spin_lock_irqsave(&card->card_lock, card->flags); - for (a = 0; a < 10; a++) { - if (inw(base + 0xe) & 0x1) - return 1; - udelay(10); - } - spin_unlock_irqrestore(&card->card_lock, card->flags); - msleep(10); - } - pr_warn("Failed to lock Card (0x%lx)\n", card->base); - - return 0; /* Failed to acquire the card! */ -} - -static void unlock_card(struct isi_board *card) -{ - spin_unlock_irqrestore(&card->card_lock, card->flags); -} - -/* - * ISI Card specific ops ... - */ - -/* card->lock HAS to be held */ -static void raise_dtr(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0504, base); - InterruptTheCard(base); - port->status |= ISI_DTR; -} - -/* card->lock HAS to be held */ -static void drop_dtr(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0404, base); - InterruptTheCard(base); - port->status &= ~ISI_DTR; -} - -/* card->lock HAS to be held */ -static inline void raise_rts(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0a04, base); - InterruptTheCard(base); - port->status |= ISI_RTS; -} - -/* card->lock HAS to be held */ -static inline void drop_rts(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0804, base); - InterruptTheCard(base); - port->status &= ~ISI_RTS; -} - -/* card->lock MUST NOT be held */ - -static void isicom_dtr_rts(struct tty_port *port, int on) -{ - struct isi_port *ip = container_of(port, struct isi_port, port); - struct isi_board *card = ip->card; - unsigned long base = card->base; - u16 channel = ip->channel; - - if (!lock_card(card)) - return; - - if (on) { - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0f04, base); - InterruptTheCard(base); - ip->status |= (ISI_DTR | ISI_RTS); - } else { - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0C04, base); - InterruptTheCard(base); - ip->status &= ~(ISI_DTR | ISI_RTS); - } - unlock_card(card); -} - -/* card->lock HAS to be held */ -static void drop_dtr_rts(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0c04, base); - InterruptTheCard(base); - port->status &= ~(ISI_RTS | ISI_DTR); -} - -/* - * ISICOM Driver specific routines ... - * - */ - -static inline int __isicom_paranoia_check(struct isi_port const *port, - char *name, const char *routine) -{ - if (!port) { - pr_warn("Warning: bad isicom magic for dev %s in %s\n", - name, routine); - return 1; - } - if (port->magic != ISICOM_MAGIC) { - pr_warn("Warning: NULL isicom port for dev %s in %s\n", - name, routine); - return 1; - } - - return 0; -} - -/* - * Transmitter. - * - * We shovel data into the card buffers on a regular basis. The card - * will do the rest of the work for us. - */ - -static void isicom_tx(struct timer_list *unused) -{ - unsigned long flags, base; - unsigned int retries; - short count = (BOARD_COUNT-1), card; - short txcount, wrd, residue, word_count, cnt; - struct isi_port *port; - struct tty_struct *tty; - - /* find next active board */ - card = (prev_card + 1) & 0x0003; - while (count-- > 0) { - if (isi_card[card].status & BOARD_ACTIVE) - break; - card = (card + 1) & 0x0003; - } - if (!(isi_card[card].status & BOARD_ACTIVE)) - goto sched_again; - - prev_card = card; - - count = isi_card[card].port_count; - port = isi_card[card].ports; - base = isi_card[card].base; - - spin_lock_irqsave(&isi_card[card].card_lock, flags); - for (retries = 0; retries < 100; retries++) { - if (inw(base + 0xe) & 0x1) - break; - udelay(2); - } - if (retries >= 100) - goto unlock; - - tty = tty_port_tty_get(&port->port); - if (tty == NULL) - goto put_unlock; - - for (; count > 0; count--, port++) { - /* port not active or tx disabled to force flow control */ - if (!tty_port_initialized(&port->port) || - !(port->status & ISI_TXOK)) - continue; - - txcount = min_t(short, TX_SIZE, port->xmit_cnt); - if (txcount <= 0 || tty->stopped || tty->hw_stopped) - continue; - - if (!(inw(base + 0x02) & (1 << port->channel))) - continue; - - pr_debug("txing %d bytes, port%d.\n", - txcount, port->channel + 1); - outw((port->channel << isi_card[card].shift_count) | txcount, - base); - residue = NO; - wrd = 0; - while (1) { - cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE - - port->xmit_tail)); - if (residue == YES) { - residue = NO; - if (cnt > 0) { - wrd |= (port->port.xmit_buf[port->xmit_tail] - << 8); - port->xmit_tail = (port->xmit_tail + 1) - & (SERIAL_XMIT_SIZE - 1); - port->xmit_cnt--; - txcount--; - cnt--; - outw(wrd, base); - } else { - outw(wrd, base); - break; - } - } - if (cnt <= 0) - break; - word_count = cnt >> 1; - outsw(base, port->port.xmit_buf+port->xmit_tail, word_count); - port->xmit_tail = (port->xmit_tail - + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1); - txcount -= (word_count << 1); - port->xmit_cnt -= (word_count << 1); - if (cnt & 0x0001) { - residue = YES; - wrd = port->port.xmit_buf[port->xmit_tail]; - port->xmit_tail = (port->xmit_tail + 1) - & (SERIAL_XMIT_SIZE - 1); - port->xmit_cnt--; - txcount--; - } - } - - InterruptTheCard(base); - if (port->xmit_cnt <= 0) - port->status &= ~ISI_TXOK; - if (port->xmit_cnt <= WAKEUP_CHARS) - tty_wakeup(tty); - } - -put_unlock: - tty_kref_put(tty); -unlock: - spin_unlock_irqrestore(&isi_card[card].card_lock, flags); - /* schedule another tx for hopefully in about 10ms */ -sched_again: - mod_timer(&tx, jiffies + msecs_to_jiffies(10)); -} - -/* - * Main interrupt handler routine - */ - -static irqreturn_t isicom_interrupt(int irq, void *dev_id) -{ - struct isi_board *card = dev_id; - struct isi_port *port; - struct tty_struct *tty; - unsigned long base; - u16 header, word_count, count, channel; - short byte_count; - unsigned char *rp; - - if (!card || !(card->status & FIRMWARE_LOADED)) - return IRQ_NONE; - - base = card->base; - - /* did the card interrupt us? */ - if (!(inw(base + 0x0e) & 0x02)) - return IRQ_NONE; - - spin_lock(&card->card_lock); - - /* - * disable any interrupts from the PCI card and lower the - * interrupt line - */ - outw(0x8000, base+0x04); - ClearInterrupt(base); - - inw(base); /* get the dummy word out */ - header = inw(base); - channel = (header & 0x7800) >> card->shift_count; - byte_count = header & 0xff; - - if (channel + 1 > card->port_count) { - pr_warn("%s(0x%lx): %d(channel) > port_count\n", - __func__, base, channel + 1); - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - return IRQ_HANDLED; - } - port = card->ports + channel; - if (!tty_port_initialized(&port->port)) { - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - return IRQ_HANDLED; - } - - tty = tty_port_tty_get(&port->port); - if (tty == NULL) { - while (byte_count > 1) { - inw(base); - byte_count -= 2; - } - if (byte_count & 0x01) - inw(base); - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - return IRQ_HANDLED; - } - - if (header & 0x8000) { /* Status Packet */ - header = inw(base); - switch (header & 0xff) { - case 0: /* Change in EIA signals */ - if (tty_port_check_carrier(&port->port)) { - if (port->status & ISI_DCD) { - if (!(header & ISI_DCD)) { - /* Carrier has been lost */ - pr_debug("%s: DCD->low.\n", - __func__); - port->status &= ~ISI_DCD; - tty_hangup(tty); - } - } else if (header & ISI_DCD) { - /* Carrier has been detected */ - pr_debug("%s: DCD->high.\n", - __func__); - port->status |= ISI_DCD; - wake_up_interruptible(&port->port.open_wait); - } - } else { - if (header & ISI_DCD) - port->status |= ISI_DCD; - else - port->status &= ~ISI_DCD; - } - - if (tty_port_cts_enabled(&port->port)) { - if (tty->hw_stopped) { - if (header & ISI_CTS) { - tty->hw_stopped = 0; - /* start tx ing */ - port->status |= (ISI_TXOK - | ISI_CTS); - tty_wakeup(tty); - } - } else if (!(header & ISI_CTS)) { - tty->hw_stopped = 1; - /* stop tx ing */ - port->status &= ~(ISI_TXOK | ISI_CTS); - } - } else { - if (header & ISI_CTS) - port->status |= ISI_CTS; - else - port->status &= ~ISI_CTS; - } - - if (header & ISI_DSR) - port->status |= ISI_DSR; - else - port->status &= ~ISI_DSR; - - if (header & ISI_RI) - port->status |= ISI_RI; - else - port->status &= ~ISI_RI; - - break; - - case 1: /* Received Break !!! */ - tty_insert_flip_char(&port->port, 0, TTY_BREAK); - if (port->port.flags & ASYNC_SAK) - do_SAK(tty); - tty_flip_buffer_push(&port->port); - break; - - case 2: /* Statistics */ - pr_debug("%s: stats!!!\n", __func__); - break; - - default: - pr_debug("%s: Unknown code in status packet.\n", - __func__); - break; - } - } else { /* Data Packet */ - count = tty_prepare_flip_string(&port->port, &rp, - byte_count & ~1); - pr_debug("%s: Can rx %d of %d bytes.\n", - __func__, count, byte_count); - word_count = count >> 1; - insw(base, rp, word_count); - byte_count -= (word_count << 1); - if (count & 0x0001) { - tty_insert_flip_char(&port->port, inw(base) & 0xff, - TTY_NORMAL); - byte_count -= 2; - } - if (byte_count > 0) { - pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n", - __func__, base, channel + 1); - /* drain out unread xtra data */ - while (byte_count > 0) { - inw(base); - byte_count -= 2; - } - } - tty_flip_buffer_push(&port->port); - } - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - tty_kref_put(tty); - - return IRQ_HANDLED; -} - -static void isicom_config_port(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long baud; - unsigned long base = card->base; - u16 channel_setup, channel = port->channel, - shift_count = card->shift_count; - unsigned char flow_ctrl; - - /* FIXME: Switch to new tty baud API */ - baud = C_BAUD(tty); - if (baud & CBAUDEX) { - baud &= ~CBAUDEX; - - /* if CBAUDEX bit is on and the baud is set to either 50 or 75 - * then the card is programmed for 57.6Kbps or 115Kbps - * respectively. - */ - - /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */ - if (baud < 1 || baud > 4) - tty->termios.c_cflag &= ~CBAUDEX; - else - baud += 15; - } - if (baud == 15) { - - /* the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set - * by the set_serial_info ioctl ... this is done by - * the 'setserial' utility. - */ - - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baud++; /* 57.6 Kbps */ - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baud += 2; /* 115 Kbps */ - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - baud += 3; /* 230 kbps*/ - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - baud += 4; /* 460 kbps*/ - } - if (linuxb_to_isib[baud] == -1) { - /* hang up */ - drop_dtr(port); - return; - } else - raise_dtr(port); - - if (WaitTillCardIsFree(base) == 0) { - outw(0x8000 | (channel << shift_count) | 0x03, base); - outw(linuxb_to_isib[baud] << 8 | 0x03, base); - channel_setup = 0; - switch (C_CSIZE(tty)) { - case CS5: - channel_setup |= ISICOM_CS5; - break; - case CS6: - channel_setup |= ISICOM_CS6; - break; - case CS7: - channel_setup |= ISICOM_CS7; - break; - case CS8: - channel_setup |= ISICOM_CS8; - break; - } - - if (C_CSTOPB(tty)) - channel_setup |= ISICOM_2SB; - if (C_PARENB(tty)) { - channel_setup |= ISICOM_EVPAR; - if (C_PARODD(tty)) - channel_setup |= ISICOM_ODPAR; - } - outw(channel_setup, base); - InterruptTheCard(base); - } - tty_port_set_check_carrier(&port->port, !C_CLOCAL(tty)); - - /* flow control settings ...*/ - flow_ctrl = 0; - tty_port_set_cts_flow(&port->port, C_CRTSCTS(tty)); - if (C_CRTSCTS(tty)) - flow_ctrl |= ISICOM_CTSRTS; - if (I_IXON(tty)) - flow_ctrl |= ISICOM_RESPOND_XONXOFF; - if (I_IXOFF(tty)) - flow_ctrl |= ISICOM_INITIATE_XONXOFF; - - if (WaitTillCardIsFree(base) == 0) { - outw(0x8000 | (channel << shift_count) | 0x04, base); - outw(flow_ctrl << 8 | 0x05, base); - outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base); - InterruptTheCard(base); - } - - /* rx enabled -> enable port for rx on the card */ - if (C_CREAD(tty)) { - card->port_status |= (1 << channel); - outw(card->port_status, base + 0x02); - } -} - -/* open et all */ - -static inline void isicom_setup_board(struct isi_board *bp) -{ - int channel; - struct isi_port *port; - - bp->count++; - if (!(bp->status & BOARD_INIT)) { - port = bp->ports; - for (channel = 0; channel < bp->port_count; channel++, port++) - drop_dtr_rts(port); - } - bp->status |= BOARD_ACTIVE | BOARD_INIT; -} - -/* Activate and thus setup board are protected from races against shutdown - by the tty_port mutex */ - -static int isicom_activate(struct tty_port *tport, struct tty_struct *tty) -{ - struct isi_port *port = container_of(tport, struct isi_port, port); - struct isi_board *card = port->card; - unsigned long flags; - - if (tty_port_alloc_xmit_buf(tport) < 0) - return -ENOMEM; - - spin_lock_irqsave(&card->card_lock, flags); - isicom_setup_board(card); - - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - - /* discard any residual data */ - if (WaitTillCardIsFree(card->base) == 0) { - outw(0x8000 | (port->channel << card->shift_count) | 0x02, - card->base); - outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base); - InterruptTheCard(card->base); - } - isicom_config_port(tty); - spin_unlock_irqrestore(&card->card_lock, flags); - - return 0; -} - -static int isicom_carrier_raised(struct tty_port *port) -{ - struct isi_port *ip = container_of(port, struct isi_port, port); - return (ip->status & ISI_DCD)?1 : 0; -} - -static struct tty_port *isicom_find_port(struct tty_struct *tty) -{ - struct isi_port *port; - struct isi_board *card; - unsigned int board; - int line = tty->index; - - board = BOARD(line); - card = &isi_card[board]; - - if (!(card->status & FIRMWARE_LOADED)) - return NULL; - - /* open on a port greater than the port count for the card !!! */ - if (line > ((board * 16) + card->port_count - 1)) - return NULL; - - port = &isi_ports[line]; - if (isicom_paranoia_check(port, tty->name, "isicom_open")) - return NULL; - - return &port->port; -} - -static int isicom_open(struct tty_struct *tty, struct file *filp) -{ - struct isi_port *port; - struct tty_port *tport; - - tport = isicom_find_port(tty); - if (tport == NULL) - return -ENODEV; - port = container_of(tport, struct isi_port, port); - - tty->driver_data = port; - return tty_port_open(tport, tty, filp); -} - -/* close et all */ - -/* card->lock HAS to be held */ -static void isicom_shutdown_port(struct isi_port *port) -{ - struct isi_board *card = port->card; - - if (--card->count < 0) { - pr_debug("%s: bad board(0x%lx) count %d.\n", - __func__, card->base, card->count); - card->count = 0; - } - /* last port was closed, shutdown that board too */ - if (!card->count) - card->status &= BOARD_ACTIVE; -} - -static void isicom_flush_buffer(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer")) - return; - - spin_lock_irqsave(&card->card_lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&card->card_lock, flags); - - tty_wakeup(tty); -} - -static void isicom_shutdown(struct tty_port *port) -{ - struct isi_port *ip = container_of(port, struct isi_port, port); - struct isi_board *card = ip->card; - unsigned long flags; - - /* indicate to the card that no more data can be received - on this port */ - spin_lock_irqsave(&card->card_lock, flags); - card->port_status &= ~(1 << ip->channel); - outw(card->port_status, card->base + 0x02); - isicom_shutdown_port(ip); - spin_unlock_irqrestore(&card->card_lock, flags); - tty_port_free_xmit_buf(port); -} - -static void isicom_close(struct tty_struct *tty, struct file *filp) -{ - struct isi_port *ip = tty->driver_data; - struct tty_port *port; - - if (ip == NULL) - return; - - port = &ip->port; - if (isicom_paranoia_check(ip, tty->name, "isicom_close")) - return; - tty_port_close(port, tty, filp); -} - -/* write et all */ -static int isicom_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long flags; - int cnt, total = 0; - - if (isicom_paranoia_check(port, tty->name, "isicom_write")) - return 0; - - spin_lock_irqsave(&card->card_lock, flags); - - while (1) { - cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - - 1, SERIAL_XMIT_SIZE - port->xmit_head)); - if (cnt <= 0) - break; - - memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt); - port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE - - 1); - port->xmit_cnt += cnt; - buf += cnt; - count -= cnt; - total += cnt; - } - if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped) - port->status |= ISI_TXOK; - spin_unlock_irqrestore(&card->card_lock, flags); - return total; -} - -/* put_char et all */ -static int isicom_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_put_char")) - return 0; - - spin_lock_irqsave(&card->card_lock, flags); - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { - spin_unlock_irqrestore(&card->card_lock, flags); - return 0; - } - - port->port.xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= (SERIAL_XMIT_SIZE - 1); - port->xmit_cnt++; - spin_unlock_irqrestore(&card->card_lock, flags); - return 1; -} - -/* flush_chars et all */ -static void isicom_flush_chars(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars")) - return; - - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->port.xmit_buf) - return; - - /* this tells the transmitter to consider this port for - data output to the card ... that's the best we can do. */ - port->status |= ISI_TXOK; -} - -/* write_room et all */ -static int isicom_write_room(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - int free; - - if (isicom_paranoia_check(port, tty->name, "isicom_write_room")) - return 0; - - free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (free < 0) - free = 0; - return free; -} - -/* chars_in_buffer et all */ -static int isicom_chars_in_buffer(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer")) - return 0; - return port->xmit_cnt; -} - -/* ioctl et all */ -static int isicom_send_break(struct tty_struct *tty, int length) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long base = card->base; - - if (length == -1) - return -EOPNOTSUPP; - - if (!lock_card(card)) - return -EINVAL; - - outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base); - outw((length & 0xff) << 8 | 0x00, base); - outw((length & 0xff00u), base); - InterruptTheCard(base); - - unlock_card(card); - return 0; -} - -static int isicom_tiocmget(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - /* just send the port status */ - u16 status = port->status; - - if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) - return -ENODEV; - - return ((status & ISI_RTS) ? TIOCM_RTS : 0) | - ((status & ISI_DTR) ? TIOCM_DTR : 0) | - ((status & ISI_DCD) ? TIOCM_CAR : 0) | - ((status & ISI_DSR) ? TIOCM_DSR : 0) | - ((status & ISI_CTS) ? TIOCM_CTS : 0) | - ((status & ISI_RI ) ? TIOCM_RI : 0); -} - -static int isicom_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct isi_port *port = tty->driver_data; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) - return -ENODEV; - - spin_lock_irqsave(&port->card->card_lock, flags); - if (set & TIOCM_RTS) - raise_rts(port); - if (set & TIOCM_DTR) - raise_dtr(port); - - if (clear & TIOCM_RTS) - drop_rts(port); - if (clear & TIOCM_DTR) - drop_dtr(port); - spin_unlock_irqrestore(&port->card->card_lock, flags); - - return 0; -} - -static int isicom_set_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct isi_port *port = tty->driver_data; - int reconfig_port; - - if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) - return -ENODEV; - - mutex_lock(&port->port.mutex); - reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) != - (ss->flags & ASYNC_SPD_MASK)); - - if (!capable(CAP_SYS_ADMIN)) { - if ((ss->close_delay != port->port.close_delay) || - (ss->closing_wait != port->port.closing_wait) || - ((ss->flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) { - mutex_unlock(&port->port.mutex); - return -EPERM; - } - port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | - (ss->flags & ASYNC_USR_MASK)); - } else { - port->port.close_delay = ss->close_delay; - port->port.closing_wait = ss->closing_wait; - port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | - (ss->flags & ASYNC_FLAGS)); - } - if (reconfig_port) { - unsigned long flags; - spin_lock_irqsave(&port->card->card_lock, flags); - isicom_config_port(tty); - spin_unlock_irqrestore(&port->card->card_lock, flags); - } - mutex_unlock(&port->port.mutex); - return 0; -} - -static int isicom_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) - return -ENODEV; - - mutex_lock(&port->port.mutex); -/* ss->type = ? */ - ss->line = port - isi_ports; - ss->port = port->card->base; - ss->irq = port->card->irq; - ss->flags = port->port.flags; -/* ss->baud_base = ? */ - ss->close_delay = port->port.close_delay; - ss->closing_wait = port->port.closing_wait; - mutex_unlock(&port->port.mutex); - return 0; -} - -/* set_termios et all */ -static void isicom_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct isi_port *port = tty->driver_data; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_set_termios")) - return; - - if (tty->termios.c_cflag == old_termios->c_cflag && - tty->termios.c_iflag == old_termios->c_iflag) - return; - - spin_lock_irqsave(&port->card->card_lock, flags); - isicom_config_port(tty); - spin_unlock_irqrestore(&port->card->card_lock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; - isicom_start(tty); - } -} - -/* throttle et all */ -static void isicom_throttle(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - - if (isicom_paranoia_check(port, tty->name, "isicom_throttle")) - return; - - /* tell the card that this port cannot handle any more data for now */ - card->port_status &= ~(1 << port->channel); - outw(card->port_status, card->base + 0x02); -} - -/* unthrottle et all */ -static void isicom_unthrottle(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - - if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle")) - return; - - /* tell the card that this port is ready to accept more data */ - card->port_status |= (1 << port->channel); - outw(card->port_status, card->base + 0x02); -} - -/* stop et all */ -static void isicom_stop(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_stop")) - return; - - /* this tells the transmitter not to consider this port for - data output to the card. */ - port->status &= ~ISI_TXOK; -} - -/* start et all */ -static void isicom_start(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_start")) - return; - - /* this tells the transmitter to consider this port for - data output to the card. */ - port->status |= ISI_TXOK; -} - -static void isicom_hangup(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_hangup")) - return; - tty_port_hangup(&port->port); -} - - -/* - * Driver init and deinit functions - */ - -static const struct tty_operations isicom_ops = { - .open = isicom_open, - .close = isicom_close, - .write = isicom_write, - .put_char = isicom_put_char, - .flush_chars = isicom_flush_chars, - .write_room = isicom_write_room, - .chars_in_buffer = isicom_chars_in_buffer, - .set_termios = isicom_set_termios, - .throttle = isicom_throttle, - .unthrottle = isicom_unthrottle, - .stop = isicom_stop, - .start = isicom_start, - .hangup = isicom_hangup, - .flush_buffer = isicom_flush_buffer, - .tiocmget = isicom_tiocmget, - .tiocmset = isicom_tiocmset, - .break_ctl = isicom_send_break, - .get_serial = isicom_get_serial_info, - .set_serial = isicom_set_serial_info, -}; - -static const struct tty_port_operations isicom_port_ops = { - .carrier_raised = isicom_carrier_raised, - .dtr_rts = isicom_dtr_rts, - .activate = isicom_activate, - .shutdown = isicom_shutdown, -}; - -static int reset_card(struct pci_dev *pdev, - const unsigned int card, unsigned int *signature) -{ - struct isi_board *board = pci_get_drvdata(pdev); - unsigned long base = board->base; - unsigned int sig, portcount = 0; - int retval = 0; - - dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1, - base); - - inw(base + 0x8); - - msleep(10); - - outw(0, base + 0x8); /* Reset */ - - msleep(1000); - - sig = inw(base + 0x4) & 0xff; - - if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd && - sig != 0xee) { - dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible " - "bad I/O Port Address 0x%lx).\n", card + 1, base); - dev_dbg(&pdev->dev, "Sig=0x%x\n", sig); - retval = -EIO; - goto end; - } - - msleep(10); - - portcount = inw(base + 0x2); - if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 && - portcount != 8 && portcount != 16)) { - dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n", - card + 1); - retval = -EIO; - goto end; - } - - switch (sig) { - case 0xa5: - case 0xbb: - case 0xdd: - board->port_count = (portcount == 4) ? 4 : 8; - board->shift_count = 12; - break; - case 0xcc: - case 0xee: - board->port_count = 16; - board->shift_count = 11; - break; - } - dev_info(&pdev->dev, "-Done\n"); - *signature = sig; - -end: - return retval; -} - -static int load_firmware(struct pci_dev *pdev, - const unsigned int index, const unsigned int signature) -{ - struct isi_board *board = pci_get_drvdata(pdev); - const struct firmware *fw; - unsigned long base = board->base; - unsigned int a; - u16 word_count, status; - int retval = -EIO; - char *name; - u8 *data; - - struct stframe { - u16 addr; - u16 count; - u8 data[0]; - } *frame; - - switch (signature) { - case 0xa5: - name = "isi608.bin"; - break; - case 0xbb: - name = "isi608em.bin"; - break; - case 0xcc: - name = "isi616em.bin"; - break; - case 0xdd: - name = "isi4608.bin"; - break; - case 0xee: - name = "isi4616.bin"; - break; - default: - dev_err(&pdev->dev, "Unknown signature.\n"); - goto end; - } - - retval = request_firmware(&fw, name, &pdev->dev); - if (retval) - goto end; - - retval = -EIO; - - for (frame = (struct stframe *)fw->data; - frame < (struct stframe *)(fw->data + fw->size); - frame = (struct stframe *)((u8 *)(frame + 1) + - frame->count)) { - if (WaitTillCardIsFree(base)) - goto errrelfw; - - outw(0xf0, base); /* start upload sequence */ - outw(0x00, base); - outw(frame->addr, base); /* lsb of address */ - - word_count = frame->count / 2 + frame->count % 2; - outw(word_count, base); - InterruptTheCard(base); - - udelay(100); /* 0x2f */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_warn(&pdev->dev, "Card%d rejected load header:\n" - "Address:0x%x\n" - "Count:0x%x\n" - "Status:0x%x\n", - index + 1, frame->addr, frame->count, status); - goto errrelfw; - } - outsw(base, frame->data, word_count); - - InterruptTheCard(base); - - udelay(50); /* 0x0f */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_err(&pdev->dev, "Card%d got out of sync.Card " - "Status:0x%x\n", index + 1, status); - goto errrelfw; - } - } - -/* XXX: should we test it by reading it back and comparing with original like - * in load firmware package? */ - for (frame = (struct stframe *)fw->data; - frame < (struct stframe *)(fw->data + fw->size); - frame = (struct stframe *)((u8 *)(frame + 1) + - frame->count)) { - if (WaitTillCardIsFree(base)) - goto errrelfw; - - outw(0xf1, base); /* start download sequence */ - outw(0x00, base); - outw(frame->addr, base); /* lsb of address */ - - word_count = (frame->count >> 1) + frame->count % 2; - outw(word_count + 1, base); - InterruptTheCard(base); - - udelay(50); /* 0xf */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_warn(&pdev->dev, "Card%d rejected verify header:\n" - "Address:0x%x\n" - "Count:0x%x\n" - "Status: 0x%x\n", - index + 1, frame->addr, frame->count, status); - goto errrelfw; - } - - data = kmalloc_array(word_count, 2, GFP_KERNEL); - if (data == NULL) { - dev_err(&pdev->dev, "Card%d, firmware upload " - "failed, not enough memory\n", index + 1); - goto errrelfw; - } - inw(base); - insw(base, data, word_count); - InterruptTheCard(base); - - for (a = 0; a < frame->count; a++) - if (data[a] != frame->data[a]) { - kfree(data); - dev_err(&pdev->dev, "Card%d, firmware upload " - "failed\n", index + 1); - goto errrelfw; - } - kfree(data); - - udelay(50); /* 0xf */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_err(&pdev->dev, "Card%d verify got out of sync. " - "Card Status:0x%x\n", index + 1, status); - goto errrelfw; - } - } - - /* xfer ctrl */ - if (WaitTillCardIsFree(base)) - goto errrelfw; - - outw(0xf2, base); - outw(0x800, base); - outw(0x0, base); - outw(0x0, base); - InterruptTheCard(base); - outw(0x0, base + 0x4); /* for ISI4608 cards */ - - board->status |= FIRMWARE_LOADED; - retval = 0; - -errrelfw: - release_firmware(fw); -end: - return retval; -} - -/* - * Insmod can set static symbols so keep these static - */ -static unsigned int card_count; - -static int isicom_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - unsigned int signature, index; - int retval = -EPERM; - struct isi_board *board = NULL; - - if (card_count >= BOARD_COUNT) - goto err; - - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "failed to enable\n"); - goto err; - } - - dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device); - - /* allot the first empty slot in the array */ - for (index = 0; index < BOARD_COUNT; index++) { - if (isi_card[index].base == 0) { - board = &isi_card[index]; - break; - } - } - if (index == BOARD_COUNT) { - retval = -ENODEV; - goto err_disable; - } - - board->index = index; - board->base = pci_resource_start(pdev, 3); - board->irq = pdev->irq; - card_count++; - - pci_set_drvdata(pdev, board); - - retval = pci_request_region(pdev, 3, ISICOM_NAME); - if (retval) { - dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d " - "will be disabled.\n", board->base, board->base + 15, - index + 1); - retval = -EBUSY; - goto errdec; - } - - retval = request_irq(board->irq, isicom_interrupt, - IRQF_SHARED, ISICOM_NAME, board); - if (retval < 0) { - dev_err(&pdev->dev, "Could not install handler at Irq %d. " - "Card%d will be disabled.\n", board->irq, index + 1); - goto errunrr; - } - - retval = reset_card(pdev, index, &signature); - if (retval < 0) - goto errunri; - - retval = load_firmware(pdev, index, signature); - if (retval < 0) - goto errunri; - - for (index = 0; index < board->port_count; index++) { - struct tty_port *tport = &board->ports[index].port; - tty_port_init(tport); - tport->ops = &isicom_port_ops; - tport->close_delay = 50 * HZ/100; - tport->closing_wait = 3000 * HZ/100; - tty_port_register_device(tport, isicom_normal, - board->index * 16 + index, &pdev->dev); - } - - return 0; - -errunri: - free_irq(board->irq, board); -errunrr: - pci_release_region(pdev, 3); -errdec: - board->base = 0; - card_count--; -err_disable: - pci_disable_device(pdev); -err: - return retval; -} - -static void isicom_remove(struct pci_dev *pdev) -{ - struct isi_board *board = pci_get_drvdata(pdev); - unsigned int i; - - for (i = 0; i < board->port_count; i++) { - tty_unregister_device(isicom_normal, board->index * 16 + i); - tty_port_destroy(&board->ports[i].port); - } - - free_irq(board->irq, board); - pci_release_region(pdev, 3); - board->base = 0; - card_count--; - pci_disable_device(pdev); -} - -static int __init isicom_init(void) -{ - int retval, idx, channel; - struct isi_port *port; - - for (idx = 0; idx < BOARD_COUNT; idx++) { - port = &isi_ports[idx * 16]; - isi_card[idx].ports = port; - spin_lock_init(&isi_card[idx].card_lock); - for (channel = 0; channel < 16; channel++, port++) { - port->magic = ISICOM_MAGIC; - port->card = &isi_card[idx]; - port->channel = channel; - port->status = 0; - /* . . . */ - } - isi_card[idx].base = 0; - isi_card[idx].irq = 0; - } - - /* tty driver structure initialization */ - isicom_normal = alloc_tty_driver(PORT_COUNT); - if (!isicom_normal) { - retval = -ENOMEM; - goto error; - } - - isicom_normal->name = "ttyM"; - isicom_normal->major = ISICOM_NMAJOR; - isicom_normal->minor_start = 0; - isicom_normal->type = TTY_DRIVER_TYPE_SERIAL; - isicom_normal->subtype = SERIAL_TYPE_NORMAL; - isicom_normal->init_termios = tty_std_termios; - isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | - CLOCAL; - isicom_normal->flags = TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK; - tty_set_operations(isicom_normal, &isicom_ops); - - retval = tty_register_driver(isicom_normal); - if (retval) { - pr_debug("Couldn't register the dialin driver\n"); - goto err_puttty; - } - - retval = pci_register_driver(&isicom_driver); - if (retval < 0) { - pr_err("Unable to register pci driver.\n"); - goto err_unrtty; - } - - mod_timer(&tx, jiffies + 1); - - return 0; -err_unrtty: - tty_unregister_driver(isicom_normal); -err_puttty: - put_tty_driver(isicom_normal); -error: - return retval; -} - -static void __exit isicom_exit(void) -{ - del_timer_sync(&tx); - - pci_unregister_driver(&isicom_driver); - tty_unregister_driver(isicom_normal); - put_tty_driver(isicom_normal); -} - -module_init(isicom_init); -module_exit(isicom_exit); - -MODULE_AUTHOR("MultiTech"); -MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("isi608.bin"); -MODULE_FIRMWARE("isi608em.bin"); -MODULE_FIRMWARE("isi616em.bin"); -MODULE_FIRMWARE("isi4608.bin"); -MODULE_FIRMWARE("isi4616.bin"); diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 9f13f7d49dd7..4d4f15b5cd29 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -1118,9 +1118,7 @@ static void __exit moxa_exit(void) del_timer_sync(&moxaTimer); - if (tty_unregister_driver(moxaDriver)) - printk(KERN_ERR "Couldn't unregister MOXA Intellio family " - "serial driver\n"); + tty_unregister_driver(moxaDriver); put_tty_driver(moxaDriver); } @@ -2040,7 +2038,7 @@ static int moxa_get_serial_info(struct tty_struct *tty, ss->line = info->port.tty->index, ss->flags = info->port.flags, ss->baud_base = 921600, - ss->close_delay = info->port.close_delay; + ss->close_delay = jiffies_to_msecs(info->port.close_delay) / 10; mutex_unlock(&info->port.mutex); return 0; } @@ -2050,30 +2048,31 @@ static int moxa_set_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct moxa_port *info = tty->driver_data; + unsigned int close_delay; if (tty->index == MAX_PORTS) return -EINVAL; if (!info) return -ENODEV; - if (ss->irq != 0 || ss->port != 0 || - ss->custom_divisor != 0 || - ss->baud_base != 921600) - return -EPERM; + close_delay = msecs_to_jiffies(ss->close_delay * 10); mutex_lock(&info->port.mutex); if (!capable(CAP_SYS_ADMIN)) { - if (((ss->flags & ~ASYNC_USR_MASK) != + if (close_delay != info->port.close_delay || + ss->type != info->type || + ((ss->flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) { mutex_unlock(&info->port.mutex); return -EPERM; } + } else { + info->port.close_delay = close_delay; + + MoxaSetFifo(info, ss->type == PORT_16550A); + + info->type = ss->type; } - info->port.close_delay = ss->close_delay * HZ / 100; - - MoxaSetFifo(info, ss->type == PORT_16550A); - - info->type = ss->type; mutex_unlock(&info->port.mutex); return 0; } diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 4203b64bccdb..16a852ecbe8a 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1208,19 +1208,26 @@ static int mxser_get_serial_info(struct tty_struct *tty, { struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; + unsigned int closing_wait, close_delay; if (tty->index == MXSER_PORTS) return -ENOTTY; mutex_lock(&port->mutex); + + close_delay = jiffies_to_msecs(info->port.close_delay) / 10; + closing_wait = info->port.closing_wait; + if (closing_wait != ASYNC_CLOSING_WAIT_NONE) + closing_wait = jiffies_to_msecs(closing_wait) / 10; + ss->type = info->type, ss->line = tty->index, ss->port = info->ioaddr, ss->irq = info->board->irq, ss->flags = info->port.flags, ss->baud_base = info->baud_base, - ss->close_delay = info->port.close_delay, - ss->closing_wait = info->port.closing_wait, + ss->close_delay = close_delay; + ss->closing_wait = closing_wait; ss->custom_divisor = info->custom_divisor, mutex_unlock(&port->mutex); return 0; @@ -1233,7 +1240,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, struct tty_port *port = &info->port; speed_t baud; unsigned long sl_flags; - unsigned int flags; + unsigned int flags, close_delay, closing_wait; int retval = 0; if (tty->index == MXSER_PORTS) @@ -1255,9 +1262,15 @@ static int mxser_set_serial_info(struct tty_struct *tty, flags = port->flags & ASYNC_SPD_MASK; + close_delay = msecs_to_jiffies(ss->close_delay * 10); + closing_wait = ss->closing_wait; + if (closing_wait != ASYNC_CLOSING_WAIT_NONE) + closing_wait = msecs_to_jiffies(closing_wait * 10); + if (!capable(CAP_SYS_ADMIN)) { if ((ss->baud_base != info->baud_base) || - (ss->close_delay != info->port.close_delay) || + (close_delay != info->port.close_delay) || + (closing_wait != info->port.closing_wait) || ((ss->flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) { mutex_unlock(&port->mutex); return -EPERM; @@ -1271,8 +1284,8 @@ static int mxser_set_serial_info(struct tty_struct *tty, */ port->flags = ((port->flags & ~ASYNC_FLAGS) | (ss->flags & ASYNC_FLAGS)); - port->close_delay = ss->close_delay * HZ / 100; - port->closing_wait = ss->closing_wait * HZ / 100; + port->close_delay = close_delay; + port->closing_wait = closing_wait; if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (ss->baud_base != info->baud_base || ss->custom_divisor != @@ -1284,12 +1297,12 @@ static int mxser_set_serial_info(struct tty_struct *tty, baud = ss->baud_base / ss->custom_divisor; tty_encode_baud_rate(tty, baud, baud); } + + info->type = ss->type; + + process_txrx_fifo(info); } - info->type = ss->type; - - process_txrx_fifo(info); - if (tty_port_initialized(port)) { if (flags != (port->flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); @@ -2142,14 +2155,7 @@ end_intr: port->mon_data.rxcnt += cnt; port->mon_data.up_rxcnt += cnt; - /* - * We are called from an interrupt context with &port->slock - * being held. Drop it temporarily in order to prevent - * recursive locking. - */ - spin_unlock(&port->slock); tty_flip_buffer_push(&port->port); - spin_lock(&port->slock); } static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 51dafc06f541..5fea02cfb0cc 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -50,6 +50,7 @@ #include #include #include +#include "tty.h" static int debug; module_param(debug, int, 0600); @@ -266,7 +267,7 @@ struct gsm_mux { #define MAX_MUX 4 /* 256 minors */ static struct gsm_mux *gsm_mux[MAX_MUX]; /* GSM muxes */ -static spinlock_t gsm_mux_lock; +static DEFINE_SPINLOCK(gsm_mux_lock); static struct tty_driver *gsm_tty_driver; @@ -2384,8 +2385,18 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) /* Don't register device 0 - this is the control channel and not a usable tty interface */ base = mux_num_to_base(gsm); /* Base for this MUX */ - for (i = 1; i < NUM_DLCI; i++) - tty_register_device(gsm_tty_driver, base + i, NULL); + for (i = 1; i < NUM_DLCI; i++) { + struct device *dev; + + dev = tty_register_device(gsm_tty_driver, + base + i, NULL); + if (IS_ERR(dev)) { + for (i--; i >= 1; i--) + tty_unregister_device(gsm_tty_driver, + base + i); + return PTR_ERR(dev); + } + } } return ret; } @@ -2416,27 +2427,24 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct gsm_mux *gsm = tty->disc_data; - const unsigned char *dp; - char *f; - int i; char flags = TTY_NORMAL; if (debug & 4) print_hex_dump_bytes("gsmld_receive: ", DUMP_PREFIX_OFFSET, cp, count); - for (i = count, dp = cp, f = fp; i; i--, dp++) { - if (f) - flags = *f++; + for (; count; count--, cp++) { + if (fp) + flags = *fp++; switch (flags) { case TTY_NORMAL: - gsm->receive(gsm, *dp); + gsm->receive(gsm, *cp); break; case TTY_OVERRUN: case TTY_BREAK: case TTY_PARITY: case TTY_FRAME: - gsm_error(gsm, *dp, flags); + gsm_error(gsm, *cp, flags); break; default: WARN_ONCE(1, "%s: unknown flag %d\n", @@ -2849,7 +2857,6 @@ static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc) /* Line discipline for real tty */ static struct tty_ldisc_ops tty_ldisc_packet = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "n_gsm", .open = gsmld_open, .close = gsmld_close, @@ -3052,7 +3059,7 @@ static int gsmtty_write_room(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; if (dlci->state == DLCI_CLOSED) - return -EINVAL; + return 0; return TX_SIZE - kfifo_len(&dlci->fifo); } @@ -3060,7 +3067,7 @@ static int gsmtty_chars_in_buffer(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; if (dlci->state == DLCI_CLOSED) - return -EINVAL; + return 0; return kfifo_len(&dlci->fifo); } @@ -3261,8 +3268,6 @@ static int __init gsm_init(void) gsm_tty_driver->init_termios.c_lflag &= ~ECHO; tty_set_operations(gsm_tty_driver, &gsmtty_ops); - spin_lock_init(&gsm_mux_lock); - if (tty_register_driver(gsm_tty_driver)) { put_tty_driver(gsm_tty_driver); tty_unregister_ldisc(N_GSM0710); diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 1363e659dc1d..b0f33e8ac819 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -100,6 +100,7 @@ #include #include +#include "tty.h" /* * Buffers for individual HDLC frames @@ -787,7 +788,6 @@ static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list) static struct tty_ldisc_ops n_hdlc_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "hdlc", .open = n_hdlc_tty_open, .close = n_hdlc_tty_close, diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c index ce03ae78f5c6..b8f67b5f1ef8 100644 --- a/drivers/tty/n_null.c +++ b/drivers/tty/n_null.c @@ -40,7 +40,6 @@ static void n_null_receivebuf(struct tty_struct *tty, static struct tty_ldisc_ops null_ldisc = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "n_null", .open = n_null_open, .close = n_null_close, diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index 3161f0a535e3..2eb76ea1d88d 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -146,7 +146,6 @@ static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, static struct tty_ldisc_ops tty_ldisc_N_R3964 = { .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, .name = "R3964", .open = r3964_open, .close = r3964_close, diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 87ec15dbe10d..9686c5d10571 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -49,6 +49,7 @@ #include #include #include +#include "tty.h" /* * Until this number of characters is queued in the xmit buffer, select will @@ -2488,7 +2489,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, } static struct tty_ldisc_ops n_tty_ops = { - .magic = TTY_LDISC_MAGIC, + .owner = THIS_MODULE, .name = "n_tty", .open = n_tty_open, .close = n_tty_close, diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index 861e95043191..9a2d78ace49b 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -47,9 +47,6 @@ #include - -#define VERSION_STRING DRIVER_DESC " 2.1d" - /* Default debug printout level */ #define NOZOMI_DEBUG_LEVEL 0x00 static int debug = NOZOMI_DEBUG_LEVEL; @@ -89,7 +86,6 @@ do { \ /* Defines */ #define NOZOMI_NAME "nozomi" #define NOZOMI_NAME_TTY "nozomi_tty" -#define DRIVER_DESC "Nozomi driver" #define NTTY_TTY_MAXMINORS 256 #define NTTY_FIFO_BUFFER_SIZE 8192 @@ -359,12 +355,6 @@ struct nozomi { u32 open_ttys; }; -/* This is a data packet that is read or written to/from card */ -struct buffer { - u32 size; /* size is the length of the data buffer */ - u8 *data; -} __attribute__ ((packed)); - /* Global variables */ static const struct pci_device_id nozomi_pci_tbl[] = { {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */ @@ -787,7 +777,6 @@ static int receive_data(enum port_type index, struct nozomi *dc) int i, ret; size = __le32_to_cpu(readl(addr)); - /* DBG1( "%d bytes port: %d", size, index); */ if (tty && tty_throttled(tty)) { DBG1("No room in tty, don't read data, don't ack interrupt, " @@ -1318,8 +1307,6 @@ static int nozomi_card_init(struct pci_dev *pdev, int ndev_idx; int i; - dev_dbg(&pdev->dev, "Init, new card found\n"); - for (ndev_idx = 0; ndev_idx < ARRAY_SIZE(ndevs); ndev_idx++) if (!ndevs[ndev_idx]) break; @@ -1453,8 +1440,6 @@ static void tty_exit(struct nozomi *dc) { unsigned int i; - DBG1(" "); - for (i = 0; i < MAX_PORT; ++i) tty_port_tty_hangup(&dc->port[i].port, false); @@ -1619,8 +1604,6 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, struct port *port = tty->driver_data; unsigned long flags; - /* DBG1( "WRITEx: %d, index = %d", count, index); */ - if (!dc || !port) return -ENODEV; @@ -1746,8 +1729,6 @@ static int ntty_ioctl(struct tty_struct *tty, struct port *port = tty->driver_data; int rval = -ENOIOCTLCMD; - DBG1("******** IOCTL, cmd: %d", cmd); - switch (cmd) { case TIOCMIWAIT: { struct async_icount cprev = port->tty_icount; @@ -1773,7 +1754,6 @@ static void ntty_unthrottle(struct tty_struct *tty) struct nozomi *dc = get_dc_by_tty(tty); unsigned long flags; - DBG1("UNTHROTTLE"); spin_lock_irqsave(&dc->spin_mutex, flags); enable_transmit_dl(tty->index % MAX_PORT, dc); set_rts(tty, 1); @@ -1790,7 +1770,6 @@ static void ntty_throttle(struct tty_struct *tty) struct nozomi *dc = get_dc_by_tty(tty); unsigned long flags; - DBG1("THROTTLE"); spin_lock_irqsave(&dc->spin_mutex, flags); set_rts(tty, 0); spin_unlock_irqrestore(&dc->spin_mutex, flags); @@ -1847,8 +1826,6 @@ static __init int nozomi_init(void) { int ret; - printk(KERN_INFO "Initializing %s\n", VERSION_STRING); - ntty_driver = alloc_tty_driver(NTTY_TTY_MAXMINORS); if (!ntty_driver) return -ENOMEM; @@ -1888,7 +1865,6 @@ free_tty: static __exit void nozomi_exit(void) { - printk(KERN_INFO "Unloading %s\n", DRIVER_DESC); pci_unregister_driver(&nozomi_driver); tty_unregister_driver(ntty_driver); put_tty_driver(ntty_driver); @@ -1898,4 +1874,4 @@ module_init(nozomi_init); module_exit(nozomi_exit); MODULE_LICENSE("Dual BSD/GPL"); -MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_DESCRIPTION("Nozomi driver"); diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 5e2374580e27..9b5d4ae5d8f2 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -29,6 +29,7 @@ #include #include #include +#include "tty.h" #undef TTY_DEBUG_HANGUP #ifdef TTY_DEBUG_HANGUP @@ -159,6 +160,7 @@ static int pty_chars_in_buffer(struct tty_struct *tty) static int pty_set_lock(struct tty_struct *tty, int __user *arg) { int val; + if (get_user(val, arg)) return -EFAULT; if (val) @@ -171,6 +173,7 @@ static int pty_set_lock(struct tty_struct *tty, int __user *arg) static int pty_get_lock(struct tty_struct *tty, int __user *arg) { int locked = test_bit(TTY_PTY_LOCK, &tty->flags); + return put_user(locked, arg); } @@ -200,6 +203,7 @@ static int pty_set_pktmode(struct tty_struct *tty, int __user *arg) static int pty_get_pktmode(struct tty_struct *tty, int __user *arg) { int pktmode = tty->packet; + return put_user(pktmode, arg); } @@ -463,6 +467,7 @@ static int pty_install(struct tty_driver *driver, struct tty_struct *tty) static void pty_remove(struct tty_driver *driver, struct tty_struct *tty) { struct tty_struct *pair = tty->link; + driver->ttys[tty->index] = NULL; if (pair) pair->driver->ttys[pair->index] = NULL; diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c deleted file mode 100644 index 2540b2e4c8e8..000000000000 --- a/drivers/tty/rocket.c +++ /dev/null @@ -1,3127 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * RocketPort device driver for Linux - * - * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000. - * - * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc. - */ - -/* - * Kernel Synchronization: - * - * This driver has 2 kernel control paths - exception handlers (calls into the driver - * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts - * are not used. - * - * Critical data: - * - rp_table[], accessed through passed "info" pointers, is a global (static) array of - * serial port state information and the xmit_buf circular buffer. Protected by - * a per port spinlock. - * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there - * is data to be transmitted. Protected by atomic bit operations. - * - rp_num_ports, int indicating number of open ports, protected by atomic operations. - * - * rp_write() and rp_write_char() functions use a per port semaphore to protect against - * simultaneous access to the same port by more than one process. - */ - -/****** Defines ******/ -#define ROCKET_PARANOIA_CHECK -#define ROCKET_DISABLE_SIMUSAGE - -#undef ROCKET_SOFT_FLOW -#undef ROCKET_DEBUG_OPEN -#undef ROCKET_DEBUG_INTR -#undef ROCKET_DEBUG_WRITE -#undef ROCKET_DEBUG_FLOW -#undef ROCKET_DEBUG_THROTTLE -#undef ROCKET_DEBUG_WAIT_UNTIL_SENT -#undef ROCKET_DEBUG_RECEIVE -#undef ROCKET_DEBUG_HANGUP -#undef REV_PCI_ORDER -#undef ROCKET_DEBUG_IO - -#define POLL_PERIOD (HZ/100) /* Polling period .01 seconds (10ms) */ - -/****** Kernel includes ******/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/****** RocketPort includes ******/ - -#include "rocket_int.h" -#include "rocket.h" - -#define ROCKET_VERSION "2.09" -#define ROCKET_DATE "12-June-2003" - -/****** RocketPort Local Variables ******/ - -static void rp_do_poll(struct timer_list *unused); - -static struct tty_driver *rocket_driver; - -static struct rocket_version driver_version = { - ROCKET_VERSION, ROCKET_DATE -}; - -static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */ -static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */ - /* eg. Bit 0 indicates port 0 has xmit data, ... */ -static atomic_t rp_num_ports_open; /* Number of serial ports open */ -static DEFINE_TIMER(rocket_timer, rp_do_poll); - -static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */ -static unsigned long board2; -static unsigned long board3; -static unsigned long board4; -static unsigned long controller; -static bool support_low_speed; -static unsigned long modem1; -static unsigned long modem2; -static unsigned long modem3; -static unsigned long modem4; -static unsigned long pc104_1[8]; -static unsigned long pc104_2[8]; -static unsigned long pc104_3[8]; -static unsigned long pc104_4[8]; -static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 }; - -static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */ -static unsigned long rcktpt_io_addr[NUM_BOARDS]; -static int rcktpt_type[NUM_BOARDS]; -static int is_PCI[NUM_BOARDS]; -static rocketModel_t rocketModel[NUM_BOARDS]; -static int max_board; -static const struct tty_port_operations rocket_port_ops; - -/* - * The following arrays define the interrupt bits corresponding to each AIOP. - * These bits are different between the ISA and regular PCI boards and the - * Universal PCI boards. - */ - -static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { - AIOP_INTR_BIT_0, - AIOP_INTR_BIT_1, - AIOP_INTR_BIT_2, - AIOP_INTR_BIT_3 -}; - -#ifdef CONFIG_PCI -static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { - UPCI_AIOP_INTR_BIT_0, - UPCI_AIOP_INTR_BIT_1, - UPCI_AIOP_INTR_BIT_2, - UPCI_AIOP_INTR_BIT_3 -}; -#endif - -static Byte_t RData[RDATASIZE] = { - 0x00, 0x09, 0xf6, 0x82, - 0x02, 0x09, 0x86, 0xfb, - 0x04, 0x09, 0x00, 0x0a, - 0x06, 0x09, 0x01, 0x0a, - 0x08, 0x09, 0x8a, 0x13, - 0x0a, 0x09, 0xc5, 0x11, - 0x0c, 0x09, 0x86, 0x85, - 0x0e, 0x09, 0x20, 0x0a, - 0x10, 0x09, 0x21, 0x0a, - 0x12, 0x09, 0x41, 0xff, - 0x14, 0x09, 0x82, 0x00, - 0x16, 0x09, 0x82, 0x7b, - 0x18, 0x09, 0x8a, 0x7d, - 0x1a, 0x09, 0x88, 0x81, - 0x1c, 0x09, 0x86, 0x7a, - 0x1e, 0x09, 0x84, 0x81, - 0x20, 0x09, 0x82, 0x7c, - 0x22, 0x09, 0x0a, 0x0a -}; - -static Byte_t RRegData[RREGDATASIZE] = { - 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */ - 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */ - 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */ - 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */ - 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */ - 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */ - 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */ - 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */ - 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */ - 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */ - 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */ - 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */ - 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */ -}; - -static CONTROLLER_T sController[CTL_SIZE] = { - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}} -}; - -static Byte_t sBitMapClrTbl[8] = { - 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f -}; - -static Byte_t sBitMapSetTbl[8] = { - 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 -}; - -static int sClockPrescale = 0x14; - -/* - * Line number is the ttySIx number (x), the Minor number. We - * assign them sequentially, starting at zero. The following - * array keeps track of the line number assigned to a given board/aiop/channel. - */ -static unsigned char lineNumbers[MAX_RP_PORTS]; -static unsigned long nextLineNumber; - -/***** RocketPort Static Prototypes *********/ -static int __init init_ISA(int i); -static void rp_wait_until_sent(struct tty_struct *tty, int timeout); -static void rp_flush_buffer(struct tty_struct *tty); -static unsigned char GetLineNumber(int ctrl, int aiop, int ch); -static unsigned char SetLineNumber(int ctrl, int aiop, int ch); -static void rp_start(struct tty_struct *tty); -static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, - int ChanNum); -static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode); -static void sFlushRxFIFO(CHANNEL_T * ChP); -static void sFlushTxFIFO(CHANNEL_T * ChP); -static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags); -static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); -static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); -static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); -static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); -static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, - ByteIO_t * AiopIOList, int AiopIOListSize, - int IRQNum, Byte_t Frequency, int PeriodicOnly); -static int sReadAiopID(ByteIO_t io); -static int sReadAiopNumChan(WordIO_t io); - -MODULE_AUTHOR("Theodore Ts'o"); -MODULE_DESCRIPTION("Comtrol RocketPort driver"); -module_param_hw(board1, ulong, ioport, 0); -MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1"); -module_param_hw(board2, ulong, ioport, 0); -MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2"); -module_param_hw(board3, ulong, ioport, 0); -MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3"); -module_param_hw(board4, ulong, ioport, 0); -MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4"); -module_param_hw(controller, ulong, ioport, 0); -MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller"); -module_param(support_low_speed, bool, 0); -MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud"); -module_param(modem1, ulong, 0); -MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem"); -module_param(modem2, ulong, 0); -MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem"); -module_param(modem3, ulong, 0); -MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem"); -module_param(modem4, ulong, 0); -MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem"); -module_param_array(pc104_1, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,..."); -module_param_array(pc104_2, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,..."); -module_param_array(pc104_3, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,..."); -module_param_array(pc104_4, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,..."); - -static int __init rp_init(void); -static void rp_cleanup_module(void); - -module_init(rp_init); -module_exit(rp_cleanup_module); - - -MODULE_LICENSE("Dual BSD/GPL"); - -/*************************************************************************/ -/* Module code starts here */ - -static inline int rocket_paranoia_check(struct r_port *info, - const char *routine) -{ -#ifdef ROCKET_PARANOIA_CHECK - if (!info) - return 1; - if (info->magic != RPORT_MAGIC) { - printk(KERN_WARNING "Warning: bad magic number for rocketport " - "struct in %s\n", routine); - return 1; - } -#endif - return 0; -} - - -/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals - * that receive data is present on a serial port. Pulls data from FIFO, moves it into the - * tty layer. - */ -static void rp_do_receive(struct r_port *info, CHANNEL_t *cp, - unsigned int ChanStatus) -{ - unsigned int CharNStat; - int ToRecv, wRecv, space; - unsigned char *cbuf; - - ToRecv = sGetRxCnt(cp); -#ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv); -#endif - if (ToRecv == 0) - return; - - /* - * if status indicates there are errored characters in the - * FIFO, then enter status mode (a word in FIFO holds - * character and status). - */ - if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) { - if (!(ChanStatus & STATMODE)) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Entering STATMODE...\n"); -#endif - ChanStatus |= STATMODE; - sEnRxStatusMode(cp); - } - } - - /* - * if we previously entered status mode, then read down the - * FIFO one word at a time, pulling apart the character and - * the status. Update error counters depending on status - */ - if (ChanStatus & STATMODE) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Ignore %x, read %x...\n", - info->ignore_status_mask, info->read_status_mask); -#endif - while (ToRecv) { - char flag; - - CharNStat = sInW(sGetTxRxDataIO(cp)); -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "%x...\n", CharNStat); -#endif - if (CharNStat & STMBREAKH) - CharNStat &= ~(STMFRAMEH | STMPARITYH); - if (CharNStat & info->ignore_status_mask) { - ToRecv--; - continue; - } - CharNStat &= info->read_status_mask; - if (CharNStat & STMBREAKH) - flag = TTY_BREAK; - else if (CharNStat & STMPARITYH) - flag = TTY_PARITY; - else if (CharNStat & STMFRAMEH) - flag = TTY_FRAME; - else if (CharNStat & STMRCVROVRH) - flag = TTY_OVERRUN; - else - flag = TTY_NORMAL; - tty_insert_flip_char(&info->port, CharNStat & 0xff, - flag); - ToRecv--; - } - - /* - * after we've emptied the FIFO in status mode, turn - * status mode back off - */ - if (sGetRxCnt(cp) == 0) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Status mode off.\n"); -#endif - sDisRxStatusMode(cp); - } - } else { - /* - * we aren't in status mode, so read down the FIFO two - * characters at time by doing repeated word IO - * transfer. - */ - space = tty_prepare_flip_string(&info->port, &cbuf, ToRecv); - if (space < ToRecv) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space); -#endif - if (space <= 0) - return; - ToRecv = space; - } - wRecv = ToRecv >> 1; - if (wRecv) - sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv); - if (ToRecv & 1) - cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp)); - } - /* Push the data up to the tty layer */ - tty_flip_buffer_push(&info->port); -} - -/* - * Serial port transmit data function. Called from the timer polling loop as a - * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready - * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is - * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks. - */ -static void rp_do_transmit(struct r_port *info) -{ - int c; - CHANNEL_t *cp = &info->channel; - struct tty_struct *tty; - unsigned long flags; - -#ifdef ROCKET_DEBUG_INTR - printk(KERN_DEBUG "%s\n", __func__); -#endif - if (!info) - return; - tty = tty_port_tty_get(&info->port); - - if (tty == NULL) { - printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - return; - } - - spin_lock_irqsave(&info->slock, flags); - info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); - - /* Loop sending data to FIFO until done or FIFO full */ - while (1) { - if (tty->stopped) - break; - c = min(info->xmit_fifo_room, info->xmit_cnt); - c = min(c, XMIT_BUF_SIZE - info->xmit_tail); - if (c <= 0 || info->xmit_fifo_room <= 0) - break; - sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2); - if (c & 1) - sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]); - info->xmit_tail += c; - info->xmit_tail &= XMIT_BUF_SIZE - 1; - info->xmit_cnt -= c; - info->xmit_fifo_room -= c; -#ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "tx %d chars...\n", c); -#endif - } - - if (info->xmit_cnt == 0) - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - - if (info->xmit_cnt < WAKEUP_CHARS) { - tty_wakeup(tty); -#ifdef ROCKETPORT_HAVE_POLL_WAIT - wake_up_interruptible(&tty->poll_wait); -#endif - } - - spin_unlock_irqrestore(&info->slock, flags); - tty_kref_put(tty); - -#ifdef ROCKET_DEBUG_INTR - printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, - info->xmit_tail, info->xmit_fifo_room); -#endif -} - -/* - * Called when a serial port signals it has read data in it's RX FIFO. - * It checks what interrupts are pending and services them, including - * receiving serial data. - */ -static void rp_handle_port(struct r_port *info) -{ - CHANNEL_t *cp; - unsigned int IntMask, ChanStatus; - - if (!info) - return; - - if (!tty_port_initialized(&info->port)) { - printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " - "info->flags & NOT_INIT\n"); - return; - } - - cp = &info->channel; - - IntMask = sGetChanIntID(cp) & info->intmask; -#ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "rp_interrupt %02x...\n", IntMask); -#endif - ChanStatus = sGetChanStatus(cp); - if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */ - rp_do_receive(info, cp, ChanStatus); - } - if (IntMask & DELTA_CD) { /* CD change */ -#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP)) - printk(KERN_INFO "ttyR%d CD now %s...\n", info->line, - (ChanStatus & CD_ACT) ? "on" : "off"); -#endif - if (!(ChanStatus & CD_ACT) && info->cd_status) { -#ifdef ROCKET_DEBUG_HANGUP - printk(KERN_INFO "CD drop, calling hangup.\n"); -#endif - tty_port_tty_hangup(&info->port, false); - } - info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0; - wake_up_interruptible(&info->port.open_wait); - } -#ifdef ROCKET_DEBUG_INTR - if (IntMask & DELTA_CTS) { /* CTS change */ - printk(KERN_INFO "CTS change...\n"); - } - if (IntMask & DELTA_DSR) { /* DSR change */ - printk(KERN_INFO "DSR change...\n"); - } -#endif -} - -/* - * The top level polling routine. Repeats every 1/100 HZ (10ms). - */ -static void rp_do_poll(struct timer_list *unused) -{ - CONTROLLER_t *ctlp; - int ctrl, aiop, ch, line; - unsigned int xmitmask, i; - unsigned int CtlMask; - unsigned char AiopMask; - Word_t bit; - - /* Walk through all the boards (ctrl's) */ - for (ctrl = 0; ctrl < max_board; ctrl++) { - if (rcktpt_io_addr[ctrl] <= 0) - continue; - - /* Get a ptr to the board's control struct */ - ctlp = sCtlNumToCtlPtr(ctrl); - - /* Get the interrupt status from the board */ -#ifdef CONFIG_PCI - if (ctlp->BusType == isPCI) - CtlMask = sPCIGetControllerIntStatus(ctlp); - else -#endif - CtlMask = sGetControllerIntStatus(ctlp); - - /* Check if any AIOP read bits are set */ - for (aiop = 0; CtlMask; aiop++) { - bit = ctlp->AiopIntrBits[aiop]; - if (CtlMask & bit) { - CtlMask &= ~bit; - AiopMask = sGetAiopIntStatus(ctlp, aiop); - - /* Check if any port read bits are set */ - for (ch = 0; AiopMask; AiopMask >>= 1, ch++) { - if (AiopMask & 1) { - - /* Get the line number (/dev/ttyRx number). */ - /* Read the data from the port. */ - line = GetLineNumber(ctrl, aiop, ch); - rp_handle_port(rp_table[line]); - } - } - } - } - - xmitmask = xmit_flags[ctrl]; - - /* - * xmit_flags contains bit-significant flags, indicating there is data - * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port - * 1, ... (32 total possible). The variable i has the aiop and ch - * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc). - */ - if (xmitmask) { - for (i = 0; i < rocketModel[ctrl].numPorts; i++) { - if (xmitmask & (1 << i)) { - aiop = (i & 0x18) >> 3; - ch = i & 0x07; - line = GetLineNumber(ctrl, aiop, ch); - rp_do_transmit(rp_table[line]); - } - } - } - } - - /* - * Reset the timer so we get called at the next clock tick (10ms). - */ - if (atomic_read(&rp_num_ports_open)) - mod_timer(&rocket_timer, jiffies + POLL_PERIOD); -} - -/* - * Initializes the r_port structure for a port, as well as enabling the port on - * the board. - * Inputs: board, aiop, chan numbers - */ -static void __init -init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) -{ - unsigned rocketMode; - struct r_port *info; - int line; - CONTROLLER_T *ctlp; - - /* Get the next available line number */ - line = SetLineNumber(board, aiop, chan); - - ctlp = sCtlNumToCtlPtr(board); - - /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */ - info = kzalloc(sizeof (struct r_port), GFP_KERNEL); - if (!info) { - printk(KERN_ERR "Couldn't allocate info struct for line #%d\n", - line); - return; - } - - info->magic = RPORT_MAGIC; - info->line = line; - info->ctlp = ctlp; - info->board = board; - info->aiop = aiop; - info->chan = chan; - tty_port_init(&info->port); - info->port.ops = &rocket_port_ops; - info->flags &= ~ROCKET_MODE_MASK; - if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1)) - switch (pc104[board][line]) { - case 422: - info->flags |= ROCKET_MODE_RS422; - break; - case 485: - info->flags |= ROCKET_MODE_RS485; - break; - case 232: - default: - info->flags |= ROCKET_MODE_RS232; - break; - } - else - info->flags |= ROCKET_MODE_RS232; - - info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR; - if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) { - printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n", - board, aiop, chan); - tty_port_destroy(&info->port); - kfree(info); - return; - } - - rocketMode = info->flags & ROCKET_MODE_MASK; - - if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485)) - sEnRTSToggle(&info->channel); - else - sDisRTSToggle(&info->channel); - - if (ctlp->boardType == ROCKET_TYPE_PC104) { - switch (rocketMode) { - case ROCKET_MODE_RS485: - sSetInterfaceMode(&info->channel, InterfaceModeRS485); - break; - case ROCKET_MODE_RS422: - sSetInterfaceMode(&info->channel, InterfaceModeRS422); - break; - case ROCKET_MODE_RS232: - default: - if (info->flags & ROCKET_RTS_TOGGLE) - sSetInterfaceMode(&info->channel, InterfaceModeRS232T); - else - sSetInterfaceMode(&info->channel, InterfaceModeRS232); - break; - } - } - spin_lock_init(&info->slock); - mutex_init(&info->write_mtx); - rp_table[line] = info; - tty_port_register_device(&info->port, rocket_driver, line, - pci_dev ? &pci_dev->dev : NULL); -} - -/* - * Configures a rocketport port according to its termio settings. Called from - * user mode into the driver (exception handler). *info CD manipulation is spinlock protected. - */ -static void configure_r_port(struct tty_struct *tty, struct r_port *info, - struct ktermios *old_termios) -{ - unsigned cflag; - unsigned long flags; - unsigned rocketMode; - int bits, baud, divisor; - CHANNEL_t *cp; - struct ktermios *t = &tty->termios; - - cp = &info->channel; - cflag = t->c_cflag; - - /* Byte size and parity */ - if ((cflag & CSIZE) == CS8) { - sSetData8(cp); - bits = 10; - } else { - sSetData7(cp); - bits = 9; - } - if (cflag & CSTOPB) { - sSetStop2(cp); - bits++; - } else { - sSetStop1(cp); - } - - if (cflag & PARENB) { - sEnParity(cp); - bits++; - if (cflag & PARODD) { - sSetOddParity(cp); - } else { - sSetEvenParity(cp); - } - } else { - sDisParity(cp); - } - - /* baud rate */ - baud = tty_get_baud_rate(tty); - if (!baud) - baud = 9600; - divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; - if ((divisor >= 8192 || divisor < 0) && old_termios) { - baud = tty_termios_baud_rate(old_termios); - if (!baud) - baud = 9600; - divisor = (rp_baud_base[info->board] / baud) - 1; - } - if (divisor >= 8192 || divisor < 0) { - baud = 9600; - divisor = (rp_baud_base[info->board] / baud) - 1; - } - info->cps = baud / bits; - sSetBaud(cp, divisor); - - /* FIXME: Should really back compute a baud rate from the divisor */ - tty_encode_baud_rate(tty, baud, baud); - - if (cflag & CRTSCTS) { - info->intmask |= DELTA_CTS; - sEnCTSFlowCtl(cp); - } else { - info->intmask &= ~DELTA_CTS; - sDisCTSFlowCtl(cp); - } - if (cflag & CLOCAL) { - info->intmask &= ~DELTA_CD; - } else { - spin_lock_irqsave(&info->slock, flags); - if (sGetChanStatus(cp) & CD_ACT) - info->cd_status = 1; - else - info->cd_status = 0; - info->intmask |= DELTA_CD; - spin_unlock_irqrestore(&info->slock, flags); - } - - /* - * Handle software flow control in the board - */ -#ifdef ROCKET_SOFT_FLOW - if (I_IXON(tty)) { - sEnTxSoftFlowCtl(cp); - if (I_IXANY(tty)) { - sEnIXANY(cp); - } else { - sDisIXANY(cp); - } - sSetTxXONChar(cp, START_CHAR(tty)); - sSetTxXOFFChar(cp, STOP_CHAR(tty)); - } else { - sDisTxSoftFlowCtl(cp); - sDisIXANY(cp); - sClrTxXOFF(cp); - } -#endif - - /* - * Set up ignore/read mask words - */ - info->read_status_mask = STMRCVROVRH | 0xFF; - if (I_INPCK(tty)) - info->read_status_mask |= STMFRAMEH | STMPARITYH; - if (I_BRKINT(tty) || I_PARMRK(tty)) - info->read_status_mask |= STMBREAKH; - - /* - * Characters to ignore - */ - info->ignore_status_mask = 0; - if (I_IGNPAR(tty)) - info->ignore_status_mask |= STMFRAMEH | STMPARITYH; - if (I_IGNBRK(tty)) { - info->ignore_status_mask |= STMBREAKH; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too. (For real raw support). - */ - if (I_IGNPAR(tty)) - info->ignore_status_mask |= STMRCVROVRH; - } - - rocketMode = info->flags & ROCKET_MODE_MASK; - - if ((info->flags & ROCKET_RTS_TOGGLE) - || (rocketMode == ROCKET_MODE_RS485)) - sEnRTSToggle(cp); - else - sDisRTSToggle(cp); - - sSetRTS(&info->channel); - - if (cp->CtlP->boardType == ROCKET_TYPE_PC104) { - switch (rocketMode) { - case ROCKET_MODE_RS485: - sSetInterfaceMode(cp, InterfaceModeRS485); - break; - case ROCKET_MODE_RS422: - sSetInterfaceMode(cp, InterfaceModeRS422); - break; - case ROCKET_MODE_RS232: - default: - if (info->flags & ROCKET_RTS_TOGGLE) - sSetInterfaceMode(cp, InterfaceModeRS232T); - else - sSetInterfaceMode(cp, InterfaceModeRS232); - break; - } - } -} - -static int carrier_raised(struct tty_port *port) -{ - struct r_port *info = container_of(port, struct r_port, port); - return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - struct r_port *info = container_of(port, struct r_port, port); - if (on) { - sSetDTR(&info->channel); - sSetRTS(&info->channel); - } else { - sClrDTR(&info->channel); - sClrRTS(&info->channel); - } -} - -/* - * Exception handler that opens a serial port. Creates xmit_buf storage, fills in - * port's r_port struct. Initializes the port hardware. - */ -static int rp_open(struct tty_struct *tty, struct file *filp) -{ - struct r_port *info; - struct tty_port *port; - int retval; - CHANNEL_t *cp; - unsigned long page; - - info = rp_table[tty->index]; - if (info == NULL) - return -ENXIO; - port = &info->port; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - /* - * We must not sleep from here until the port is marked fully in use. - */ - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; - - tty->driver_data = info; - tty_port_tty_set(port, tty); - - if (port->count++ == 0) { - atomic_inc(&rp_num_ports_open); - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rocket mod++ = %d...\n", - atomic_read(&rp_num_ports_open)); -#endif - } -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count); -#endif - - /* - * Info->count is now 1; so it's safe to sleep now. - */ - if (!tty_port_initialized(port)) { - cp = &info->channel; - sSetRxTrigger(cp, TRIG_1); - if (sGetChanStatus(cp) & CD_ACT) - info->cd_status = 1; - else - info->cd_status = 0; - sDisRxStatusMode(cp); - sFlushRxFIFO(cp); - sFlushTxFIFO(cp); - - sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); - sSetRxTrigger(cp, TRIG_1); - - sGetChanStatus(cp); - sDisRxStatusMode(cp); - sClrTxXOFF(cp); - - sDisCTSFlowCtl(cp); - sDisTxSoftFlowCtl(cp); - - sEnRxFIFO(cp); - sEnTransmit(cp); - - tty_port_set_initialized(&info->port, 1); - - configure_r_port(tty, info, NULL); - if (C_BAUD(tty)) { - sSetDTR(cp); - sSetRTS(cp); - } - } - /* Starts (or resets) the maint polling loop */ - mod_timer(&rocket_timer, jiffies + POLL_PERIOD); - - retval = tty_port_block_til_ready(port, tty, filp); - if (retval) { -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); -#endif - return retval; - } - return 0; -} - -/* - * Exception handler that closes a serial port. info->port.count is considered critical. - */ -static void rp_close(struct tty_struct *tty, struct file *filp) -{ - struct r_port *info = tty->driver_data; - struct tty_port *port = &info->port; - int timeout; - CHANNEL_t *cp; - - if (rocket_paranoia_check(info, "rp_close")) - return; - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); -#endif - - if (tty_port_close_start(port, tty, filp) == 0) - return; - - mutex_lock(&port->mutex); - cp = &info->channel; - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps; - if (timeout == 0) - timeout = 1; - rp_wait_until_sent(tty, timeout); - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - - sDisTransmit(cp); - sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); - sDisCTSFlowCtl(cp); - sDisTxSoftFlowCtl(cp); - sClrTxXOFF(cp); - sFlushRxFIFO(cp); - sFlushTxFIFO(cp); - sClrRTS(cp); - if (C_HUPCL(tty)) - sClrDTR(cp); - - rp_flush_buffer(tty); - - tty_ldisc_flush(tty); - - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - - /* We can't yet use tty_port_close_end as the buffer handling in this - driver is a bit different to the usual */ - - if (port->blocked_open) { - if (port->close_delay) { - msleep_interruptible(jiffies_to_msecs(port->close_delay)); - } - wake_up_interruptible(&port->open_wait); - } else { - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - } - spin_lock_irq(&port->lock); - tty->closing = 0; - spin_unlock_irq(&port->lock); - tty_port_set_initialized(port, 0); - tty_port_set_active(port, 0); - mutex_unlock(&port->mutex); - tty_port_tty_set(port, NULL); - - atomic_dec(&rp_num_ports_open); - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rocket mod-- = %d...\n", - atomic_read(&rp_num_ports_open)); - printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line); -#endif - -} - -static void rp_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned cflag; - - if (rocket_paranoia_check(info, "rp_set_termios")) - return; - - cflag = tty->termios.c_cflag; - - /* - * This driver doesn't support CS5 or CS6 - */ - if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6)) - tty->termios.c_cflag = - ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE)); - /* Or CMSPAR */ - tty->termios.c_cflag &= ~CMSPAR; - - configure_r_port(tty, info, old_termios); - - cp = &info->channel; - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { - sClrDTR(cp); - sClrRTS(cp); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { - sSetRTS(cp); - sSetDTR(cp); - } - - if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) - rp_start(tty); -} - -static int rp_break(struct tty_struct *tty, int break_state) -{ - struct r_port *info = tty->driver_data; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_break")) - return -EINVAL; - - spin_lock_irqsave(&info->slock, flags); - if (break_state == -1) - sSendBreak(&info->channel); - else - sClrBreak(&info->channel); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} - -/* - * sGetChanRI used to be a macro in rocket_int.h. When the functionality for - * the UPCI boards was added, it was decided to make this a function because - * the macro was getting too complicated. All cases except the first one - * (UPCIRingInd) are taken directly from the original macro. - */ -static int sGetChanRI(CHANNEL_T * ChP) -{ - CONTROLLER_t *CtlP = ChP->CtlP; - int ChanNum = ChP->ChanNum; - int RingInd = 0; - - if (CtlP->UPCIRingInd) - RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]); - else if (CtlP->AltChanRingIndicator) - RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT; - else if (CtlP->boardType == ROCKET_TYPE_PC104) - RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]); - - return RingInd; -} - -/********************************************************************************************/ -/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */ - -/* - * Returns the state of the serial modem control lines. These next 2 functions - * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs. - */ -static int rp_tiocmget(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - unsigned int control, result, ChanStatus; - - ChanStatus = sGetChanStatusLo(&info->channel); - control = info->channel.TxControl[3]; - result = ((control & SET_RTS) ? TIOCM_RTS : 0) | - ((control & SET_DTR) ? TIOCM_DTR : 0) | - ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) | - (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) | - ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) | - ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0); - - return result; -} - -/* - * Sets the modem control lines - */ -static int rp_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct r_port *info = tty->driver_data; - - if (set & TIOCM_RTS) - info->channel.TxControl[3] |= SET_RTS; - if (set & TIOCM_DTR) - info->channel.TxControl[3] |= SET_DTR; - if (clear & TIOCM_RTS) - info->channel.TxControl[3] &= ~SET_RTS; - if (clear & TIOCM_DTR) - info->channel.TxControl[3] &= ~SET_DTR; - - out32(info->channel.IndexAddr, info->channel.TxControl); - return 0; -} - -static int get_config(struct r_port *info, struct rocket_config __user *retinfo) -{ - struct rocket_config tmp; - - memset(&tmp, 0, sizeof (tmp)); - mutex_lock(&info->port.mutex); - tmp.line = info->line; - tmp.flags = info->flags; - tmp.close_delay = info->port.close_delay; - tmp.closing_wait = info->port.closing_wait; - tmp.port = rcktpt_io_addr[(info->line >> 5) & 3]; - mutex_unlock(&info->port.mutex); - - if (copy_to_user(retinfo, &tmp, sizeof (*retinfo))) - return -EFAULT; - return 0; -} - -static int set_config(struct tty_struct *tty, struct r_port *info, - struct rocket_config __user *new_info) -{ - struct rocket_config new_serial; - - if (copy_from_user(&new_serial, new_info, sizeof (new_serial))) - return -EFAULT; - - mutex_lock(&info->port.mutex); - if (!capable(CAP_SYS_ADMIN)) - { - if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) { - mutex_unlock(&info->port.mutex); - return -EPERM; - } - info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); - mutex_unlock(&info->port.mutex); - return 0; - } - - if ((new_serial.flags ^ info->flags) & ROCKET_SPD_MASK) { - /* warn about deprecation, unless clearing */ - if (new_serial.flags & ROCKET_SPD_MASK) - dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); - } - - info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS)); - info->port.close_delay = new_serial.close_delay; - info->port.closing_wait = new_serial.closing_wait; - - mutex_unlock(&info->port.mutex); - - configure_r_port(tty, info, NULL); - return 0; -} - -/* - * This function fills in a rocket_ports struct with information - * about what boards/ports are in the system. This info is passed - * to user space. See setrocket.c where the info is used to create - * the /dev/ttyRx ports. - */ -static int get_ports(struct r_port *info, struct rocket_ports __user *retports) -{ - struct rocket_ports *tmp; - int board, ret = 0; - - tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) - return -ENOMEM; - - tmp->tty_major = rocket_driver->major; - - for (board = 0; board < 4; board++) { - tmp->rocketModel[board].model = rocketModel[board].model; - strcpy(tmp->rocketModel[board].modelString, - rocketModel[board].modelString); - tmp->rocketModel[board].numPorts = rocketModel[board].numPorts; - tmp->rocketModel[board].loadrm2 = rocketModel[board].loadrm2; - tmp->rocketModel[board].startingPortNumber = - rocketModel[board].startingPortNumber; - } - if (copy_to_user(retports, tmp, sizeof(*retports))) - ret = -EFAULT; - kfree(tmp); - return ret; -} - -static int reset_rm2(struct r_port *info, void __user *arg) -{ - int reset; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - if (copy_from_user(&reset, arg, sizeof (int))) - return -EFAULT; - if (reset) - reset = 1; - - if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII && - rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII) - return -EINVAL; - - if (info->ctlp->BusType == isISA) - sModemReset(info->ctlp, info->chan, reset); - else - sPCIModemReset(info->ctlp, info->chan, reset); - - return 0; -} - -static int get_version(struct r_port *info, struct rocket_version __user *retvers) -{ - if (copy_to_user(retvers, &driver_version, sizeof (*retvers))) - return -EFAULT; - return 0; -} - -/* IOCTL call handler into the driver */ -static int rp_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct r_port *info = tty->driver_data; - void __user *argp = (void __user *)arg; - int ret = 0; - - if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl")) - return -ENXIO; - - switch (cmd) { - case RCKP_GET_CONFIG: - dev_warn_ratelimited(tty->dev, - "RCKP_GET_CONFIG option is deprecated\n"); - ret = get_config(info, argp); - break; - case RCKP_SET_CONFIG: - dev_warn_ratelimited(tty->dev, - "RCKP_SET_CONFIG option is deprecated\n"); - ret = set_config(tty, info, argp); - break; - case RCKP_GET_PORTS: - dev_warn_ratelimited(tty->dev, - "RCKP_GET_PORTS option is deprecated\n"); - ret = get_ports(info, argp); - break; - case RCKP_RESET_RM2: - dev_warn_ratelimited(tty->dev, - "RCKP_RESET_RM2 option is deprecated\n"); - ret = reset_rm2(info, argp); - break; - case RCKP_GET_VERSION: - dev_warn_ratelimited(tty->dev, - "RCKP_GET_VERSION option is deprecated\n"); - ret = get_version(info, argp); - break; - default: - ret = -ENOIOCTLCMD; - } - return ret; -} - -static void rp_send_xchar(struct tty_struct *tty, char ch) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - - if (rocket_paranoia_check(info, "rp_send_xchar")) - return; - - cp = &info->channel; - if (sGetTxCnt(cp)) - sWriteTxPrioByte(cp, ch); - else - sWriteTxByte(sGetTxRxDataIO(cp), ch); -} - -static void rp_throttle(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - -#ifdef ROCKET_DEBUG_THROTTLE - printk(KERN_INFO "throttle %s ....\n", tty->name); -#endif - - if (rocket_paranoia_check(info, "rp_throttle")) - return; - - if (I_IXOFF(tty)) - rp_send_xchar(tty, STOP_CHAR(tty)); - - sClrRTS(&info->channel); -} - -static void rp_unthrottle(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; -#ifdef ROCKET_DEBUG_THROTTLE - printk(KERN_INFO "unthrottle %s ....\n", tty->name); -#endif - - if (rocket_paranoia_check(info, "rp_unthrottle")) - return; - - if (I_IXOFF(tty)) - rp_send_xchar(tty, START_CHAR(tty)); - - sSetRTS(&info->channel); -} - -/* - * ------------------------------------------------------------ - * rp_stop() and rp_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rp_stop(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - -#ifdef ROCKET_DEBUG_FLOW - printk(KERN_INFO "stop %s: %d %d....\n", tty->name, - info->xmit_cnt, info->xmit_fifo_room); -#endif - - if (rocket_paranoia_check(info, "rp_stop")) - return; - - if (sGetTxCnt(&info->channel)) - sDisTransmit(&info->channel); -} - -static void rp_start(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - -#ifdef ROCKET_DEBUG_FLOW - printk(KERN_INFO "start %s: %d %d....\n", tty->name, - info->xmit_cnt, info->xmit_fifo_room); -#endif - - if (rocket_paranoia_check(info, "rp_stop")) - return; - - sEnTransmit(&info->channel); - set_bit((info->aiop * 8) + info->chan, - (void *) &xmit_flags[info->board]); -} - -/* - * rp_wait_until_sent() --- wait until the transmitter is empty - */ -static void rp_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned long orig_jiffies; - int check_time, exit_time; - int txcnt; - - if (rocket_paranoia_check(info, "rp_wait_until_sent")) - return; - - cp = &info->channel; - - orig_jiffies = jiffies; -#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "In %s(%d) (jiff=%lu)...\n", __func__, timeout, - jiffies); - printk(KERN_INFO "cps=%d...\n", info->cps); -#endif - while (1) { - txcnt = sGetTxCnt(cp); - if (!txcnt) { - if (sGetChanStatusLo(cp) & TXSHRMT) - break; - check_time = (HZ / info->cps) / 5; - } else { - check_time = HZ * txcnt / info->cps; - } - if (timeout) { - exit_time = orig_jiffies + timeout - jiffies; - if (exit_time <= 0) - break; - if (exit_time < check_time) - check_time = exit_time; - } - if (check_time == 0) - check_time = 1; -#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt, - jiffies, check_time); -#endif - msleep_interruptible(jiffies_to_msecs(check_time)); - if (signal_pending(current)) - break; - } - __set_current_state(TASK_RUNNING); -#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); -#endif -} - -/* - * rp_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void rp_hangup(struct tty_struct *tty) -{ - CHANNEL_t *cp; - struct r_port *info = tty->driver_data; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_hangup")) - return; - -#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP)) - printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); -#endif - rp_flush_buffer(tty); - spin_lock_irqsave(&info->port.lock, flags); - if (info->port.count) - atomic_dec(&rp_num_ports_open); - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - spin_unlock_irqrestore(&info->port.lock, flags); - - tty_port_hangup(&info->port); - - cp = &info->channel; - sDisRxFIFO(cp); - sDisTransmit(cp); - sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); - sDisCTSFlowCtl(cp); - sDisTxSoftFlowCtl(cp); - sClrTxXOFF(cp); - tty_port_set_initialized(&info->port, 0); - - wake_up_interruptible(&info->port.open_wait); -} - -/* - * Exception handler - write char routine. The RocketPort driver uses a - * double-buffering strategy, with the twist that if the in-memory CPU - * buffer is empty, and there's space in the transmit FIFO, the - * writing routines will write directly to transmit FIFO. - * Write buffer and counters protected by spinlocks - */ -static int rp_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_put_char")) - return 0; - - /* - * Grab the port write mutex, locking out other processes that try to - * write to this port - */ - mutex_lock(&info->write_mtx); - -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_put_char %c...\n", ch); -#endif - - spin_lock_irqsave(&info->slock, flags); - cp = &info->channel; - - if (!tty->stopped && info->xmit_fifo_room == 0) - info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); - - if (tty->stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) { - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= XMIT_BUF_SIZE - 1; - info->xmit_cnt++; - set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - } else { - sOutB(sGetTxRxDataIO(cp), ch); - info->xmit_fifo_room--; - } - spin_unlock_irqrestore(&info->slock, flags); - mutex_unlock(&info->write_mtx); - return 1; -} - -/* - * Exception handler - write routine, called when user app writes to the device. - * A per port write mutex is used to protect from another process writing to - * this port at the same time. This other process could be running on the other CPU - * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out). - * Spinlocks protect the info xmit members. - */ -static int rp_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - const unsigned char *b; - int c, retval = 0; - unsigned long flags; - - if (count <= 0 || rocket_paranoia_check(info, "rp_write")) - return 0; - - if (mutex_lock_interruptible(&info->write_mtx)) - return -ERESTARTSYS; - -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_write %d chars...\n", count); -#endif - cp = &info->channel; - - if (!tty->stopped && info->xmit_fifo_room < count) - info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); - - /* - * If the write queue for the port is empty, and there is FIFO space, stuff bytes - * into FIFO. Use the write queue for temp storage. - */ - if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) { - c = min(count, info->xmit_fifo_room); - b = buf; - - /* Push data into FIFO, 2 bytes at a time */ - sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2); - - /* If there is a byte remaining, write it */ - if (c & 1) - sOutB(sGetTxRxDataIO(cp), b[c - 1]); - - retval += c; - buf += c; - count -= c; - - spin_lock_irqsave(&info->slock, flags); - info->xmit_fifo_room -= c; - spin_unlock_irqrestore(&info->slock, flags); - } - - /* If count is zero, we wrote it all and are done */ - if (!count) - goto end; - - /* Write remaining data into the port's xmit_buf */ - while (1) { - /* Hung up ? */ - if (!tty_port_active(&info->port)) - goto end; - c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); - c = min(c, XMIT_BUF_SIZE - info->xmit_head); - if (c <= 0) - break; - - b = buf; - memcpy(info->xmit_buf + info->xmit_head, b, c); - - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = - (info->xmit_head + c) & (XMIT_BUF_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - retval += c; - } - - if ((retval > 0) && !tty->stopped) - set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - -end: - if (info->xmit_cnt < WAKEUP_CHARS) { - tty_wakeup(tty); -#ifdef ROCKETPORT_HAVE_POLL_WAIT - wake_up_interruptible(&tty->poll_wait); -#endif - } - mutex_unlock(&info->write_mtx); - return retval; -} - -/* - * Return the number of characters that can be sent. We estimate - * only using the in-memory transmit buffer only, and ignore the - * potential space in the transmit FIFO. - */ -static int rp_write_room(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - int ret; - - if (rocket_paranoia_check(info, "rp_write_room")) - return 0; - - ret = XMIT_BUF_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_write_room returns %d...\n", ret); -#endif - return ret; -} - -/* - * Return the number of characters in the buffer. Again, this only - * counts those characters in the in-memory transmit buffer. - */ -static int rp_chars_in_buffer(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - - if (rocket_paranoia_check(info, "rp_chars_in_buffer")) - return 0; - -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt); -#endif - return info->xmit_cnt; -} - -/* - * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the - * r_port struct for the port. Note that spinlock are used to protect info members, - * do not call this function if the spinlock is already held. - */ -static void rp_flush_buffer(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_flush_buffer")) - return; - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&info->slock, flags); - -#ifdef ROCKETPORT_HAVE_POLL_WAIT - wake_up_interruptible(&tty->poll_wait); -#endif - tty_wakeup(tty); - - cp = &info->channel; - sFlushTxFIFO(cp); -} - -#ifdef CONFIG_PCI - -static const struct pci_device_id rocket_pci_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4QUAD) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8OCTA) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8OCTA) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8INTF) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8INTF) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8J) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4J) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8SNI) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16SNI) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16INTF) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP16INTF) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_CRP16INTF) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP32INTF) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP32INTF) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP4) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP8) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_232) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_422) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP6M) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4M) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_8PORT) }, - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_4PORT) }, - { } -}; -MODULE_DEVICE_TABLE(pci, rocket_pci_ids); - -/* Resets the speaker controller on RocketModem II and III devices */ -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) -{ - ByteIO_t addr; - - /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ - if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { - addr = CtlP->AiopIO[0] + 0x4F; - sOutB(addr, 0); - } - - /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ - if ((model == MODEL_UPCI_RM3_8PORT) - || (model == MODEL_UPCI_RM3_4PORT)) { - addr = CtlP->AiopIO[0] + 0x88; - sOutB(addr, 0); - } -} - -/*************************************************************************** -Function: sPCIInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd) -{ - int i; - ByteIO_t io; - - CtlP->AltChanRingIndicator = altChanRingIndicator; - CtlP->UPCIRingInd = UPCIRingInd; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isPCI; /* controller release 1 */ - - if (ConfigIO) { - CtlP->isUPCI = 1; - CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; - CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; - CtlP->AiopIntrBits = upci_aiop_intr_bits; - } else { - CtlP->isUPCI = 0; - CtlP->PCIIO = - (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); - CtlP->AiopIntrBits = aiop_intr_bits; - } - - sPCIControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - break; /* done looking for AIOPs */ - - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/* - * Called when a PCI card is found. Retrieves and stores model information, - * init's aiopic and serial port hardware. - * Inputs: i is the board number (0-n) - */ -static __init int register_PCI(int i, struct pci_dev *dev) -{ - int num_aiops, aiop, max_num_aiops, chan; - unsigned int aiopio[MAX_AIOPS_PER_BOARD]; - CONTROLLER_t *ctlp; - - int fast_clock = 0; - int altChanRingIndicator = 0; - int ports_per_aiop = 8; - WordIO_t ConfigIO = 0; - ByteIO_t UPCIRingInd = 0; - - if (!dev || !pci_match_id(rocket_pci_ids, dev) || - pci_enable_device(dev) || i >= NUM_BOARDS) - return 0; - - rcktpt_io_addr[i] = pci_resource_start(dev, 0); - - rcktpt_type[i] = ROCKET_TYPE_NORMAL; - rocketModel[i].loadrm2 = 0; - rocketModel[i].startingPortNumber = nextLineNumber; - - /* Depending on the model, set up some config variables */ - switch (dev->device) { - case PCI_DEVICE_ID_RP4QUAD: - max_num_aiops = 1; - ports_per_aiop = 4; - rocketModel[i].model = MODEL_RP4QUAD; - strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable"); - rocketModel[i].numPorts = 4; - break; - case PCI_DEVICE_ID_RP8OCTA: - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8OCTA; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_URP8OCTA: - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RP8OCTA; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP8INTF: - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8INTF; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_URP8INTF: - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RP8INTF; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP8J: - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8J; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP4J: - max_num_aiops = 1; - ports_per_aiop = 4; - rocketModel[i].model = MODEL_RP4J; - strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors"); - rocketModel[i].numPorts = 4; - break; - case PCI_DEVICE_ID_RP8SNI: - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8SNI; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP16SNI: - max_num_aiops = 2; - rocketModel[i].model = MODEL_RP16SNI; - strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_RP16INTF: - max_num_aiops = 2; - rocketModel[i].model = MODEL_RP16INTF; - strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_URP16INTF: - max_num_aiops = 2; - rocketModel[i].model = MODEL_UPCI_RP16INTF; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_CRP16INTF: - max_num_aiops = 2; - rocketModel[i].model = MODEL_CPCI_RP16INTF; - strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_RP32INTF: - max_num_aiops = 4; - rocketModel[i].model = MODEL_RP32INTF; - strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F"); - rocketModel[i].numPorts = 32; - break; - case PCI_DEVICE_ID_URP32INTF: - max_num_aiops = 4; - rocketModel[i].model = MODEL_UPCI_RP32INTF; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F"); - rocketModel[i].numPorts = 32; - break; - case PCI_DEVICE_ID_RPP4: - max_num_aiops = 1; - ports_per_aiop = 4; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RPP4; - strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port"); - rocketModel[i].numPorts = 4; - break; - case PCI_DEVICE_ID_RPP8: - max_num_aiops = 2; - ports_per_aiop = 4; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RPP8; - strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP2_232: - max_num_aiops = 1; - ports_per_aiop = 2; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RP2_232; - strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232"); - rocketModel[i].numPorts = 2; - break; - case PCI_DEVICE_ID_RP2_422: - max_num_aiops = 1; - ports_per_aiop = 2; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RP2_422; - strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422"); - rocketModel[i].numPorts = 2; - break; - case PCI_DEVICE_ID_RP6M: - - max_num_aiops = 1; - ports_per_aiop = 6; - - /* If revision is 1, the rocketmodem flash must be loaded. - * If it is 2 it is a "socketed" version. */ - if (dev->revision == 1) { - rcktpt_type[i] = ROCKET_TYPE_MODEMII; - rocketModel[i].loadrm2 = 1; - } else { - rcktpt_type[i] = ROCKET_TYPE_MODEM; - } - - rocketModel[i].model = MODEL_RP6M; - strcpy(rocketModel[i].modelString, "RocketModem 6 port"); - rocketModel[i].numPorts = 6; - break; - case PCI_DEVICE_ID_RP4M: - max_num_aiops = 1; - ports_per_aiop = 4; - if (dev->revision == 1) { - rcktpt_type[i] = ROCKET_TYPE_MODEMII; - rocketModel[i].loadrm2 = 1; - } else { - rcktpt_type[i] = ROCKET_TYPE_MODEM; - } - - rocketModel[i].model = MODEL_RP4M; - strcpy(rocketModel[i].modelString, "RocketModem 4 port"); - rocketModel[i].numPorts = 4; - break; - default: - max_num_aiops = 0; - break; - } - - /* - * Check for UPCI boards. - */ - - switch (dev->device) { - case PCI_DEVICE_ID_URP32INTF: - case PCI_DEVICE_ID_URP8INTF: - case PCI_DEVICE_ID_URP16INTF: - case PCI_DEVICE_ID_CRP16INTF: - case PCI_DEVICE_ID_URP8OCTA: - rcktpt_io_addr[i] = pci_resource_start(dev, 2); - ConfigIO = pci_resource_start(dev, 1); - if (dev->device == PCI_DEVICE_ID_URP8OCTA) { - UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; - - /* - * Check for octa or quad cable. - */ - if (! - (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) & - PCI_GPIO_CTRL_8PORT)) { - ports_per_aiop = 4; - rocketModel[i].numPorts = 4; - } - } - break; - case PCI_DEVICE_ID_UPCI_RM3_8PORT: - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RM3_8PORT; - strcpy(rocketModel[i].modelString, "RocketModem III 8 port"); - rocketModel[i].numPorts = 8; - rcktpt_io_addr[i] = pci_resource_start(dev, 2); - UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; - ConfigIO = pci_resource_start(dev, 1); - rcktpt_type[i] = ROCKET_TYPE_MODEMIII; - break; - case PCI_DEVICE_ID_UPCI_RM3_4PORT: - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RM3_4PORT; - strcpy(rocketModel[i].modelString, "RocketModem III 4 port"); - rocketModel[i].numPorts = 4; - rcktpt_io_addr[i] = pci_resource_start(dev, 2); - UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; - ConfigIO = pci_resource_start(dev, 1); - rcktpt_type[i] = ROCKET_TYPE_MODEMIII; - break; - default: - break; - } - - if (fast_clock) { - sClockPrescale = 0x12; /* mod 2 (divide by 3) */ - rp_baud_base[i] = 921600; - } else { - /* - * If support_low_speed is set, use the slow clock - * prescale, which supports 50 bps - */ - if (support_low_speed) { - /* mod 9 (divide by 10) prescale */ - sClockPrescale = 0x19; - rp_baud_base[i] = 230400; - } else { - /* mod 4 (divide by 5) prescale */ - sClockPrescale = 0x14; - rp_baud_base[i] = 460800; - } - } - - for (aiop = 0; aiop < max_num_aiops; aiop++) - aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40); - ctlp = sCtlNumToCtlPtr(i); - num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd); - for (aiop = 0; aiop < max_num_aiops; aiop++) - ctlp->AiopNumChan[aiop] = ports_per_aiop; - - dev_info(&dev->dev, "comtrol PCI controller #%d found at " - "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n", - i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString, - rocketModel[i].startingPortNumber, - rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1); - - if (num_aiops <= 0) { - rcktpt_io_addr[i] = 0; - return (0); - } - is_PCI[i] = 1; - - /* Reset the AIOPIC, init the serial ports */ - for (aiop = 0; aiop < num_aiops; aiop++) { - sResetAiopByNum(ctlp, aiop); - for (chan = 0; chan < ports_per_aiop; chan++) - init_r_port(i, aiop, chan, dev); - } - - /* Rocket modems must be reset */ - if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || - (rcktpt_type[i] == ROCKET_TYPE_MODEMII) || - (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) { - for (chan = 0; chan < ports_per_aiop; chan++) - sPCIModemReset(ctlp, chan, 1); - msleep(500); - for (chan = 0; chan < ports_per_aiop; chan++) - sPCIModemReset(ctlp, chan, 0); - msleep(500); - rmSpeakerReset(ctlp, rocketModel[i].model); - } - return (1); -} - -/* - * Probes for PCI cards, inits them if found - * Input: board_found = number of ISA boards already found, or the - * starting board number - * Returns: Number of PCI boards found - */ -static int __init init_PCI(int boards_found) -{ - struct pci_dev *dev = NULL; - int count = 0; - - /* Work through the PCI device list, pulling out ours */ - while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) { - if (register_PCI(count + boards_found, dev)) - count++; - } - return (count); -} - -#endif /* CONFIG_PCI */ - -/* - * Probes for ISA cards - * Input: i = the board number to look for - * Returns: 1 if board found, 0 else - */ -static int __init init_ISA(int i) -{ - int num_aiops, num_chan = 0, total_num_chan = 0; - int aiop, chan; - unsigned int aiopio[MAX_AIOPS_PER_BOARD]; - CONTROLLER_t *ctlp; - char *type_string; - - /* If io_addr is zero, no board configured */ - if (rcktpt_io_addr[i] == 0) - return (0); - - /* Reserve the IO region */ - if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) { - printk(KERN_ERR "Unable to reserve IO region for configured " - "ISA RocketPort at address 0x%lx, board not " - "installed...\n", rcktpt_io_addr[i]); - rcktpt_io_addr[i] = 0; - return (0); - } - - ctlp = sCtlNumToCtlPtr(i); - - ctlp->boardType = rcktpt_type[i]; - - switch (rcktpt_type[i]) { - case ROCKET_TYPE_PC104: - type_string = "(PC104)"; - break; - case ROCKET_TYPE_MODEM: - type_string = "(RocketModem)"; - break; - case ROCKET_TYPE_MODEMII: - type_string = "(RocketModem II)"; - break; - default: - type_string = ""; - break; - } - - /* - * If support_low_speed is set, use the slow clock prescale, - * which supports 50 bps - */ - if (support_low_speed) { - sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */ - rp_baud_base[i] = 230400; - } else { - sClockPrescale = 0x14; /* mod 4 (divide by 5) prescale */ - rp_baud_base[i] = 460800; - } - - for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++) - aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400); - - num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0); - - if (ctlp->boardType == ROCKET_TYPE_PC104) { - sEnAiop(ctlp, 2); /* only one AIOPIC, but these */ - sEnAiop(ctlp, 3); /* CSels used for other stuff */ - } - - /* If something went wrong initing the AIOP's release the ISA IO memory */ - if (num_aiops <= 0) { - release_region(rcktpt_io_addr[i], 64); - rcktpt_io_addr[i] = 0; - return (0); - } - - rocketModel[i].startingPortNumber = nextLineNumber; - - for (aiop = 0; aiop < num_aiops; aiop++) { - sResetAiopByNum(ctlp, aiop); - sEnAiop(ctlp, aiop); - num_chan = sGetAiopNumChan(ctlp, aiop); - total_num_chan += num_chan; - for (chan = 0; chan < num_chan; chan++) - init_r_port(i, aiop, chan, NULL); - } - is_PCI[i] = 0; - if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) { - num_chan = sGetAiopNumChan(ctlp, 0); - total_num_chan = num_chan; - for (chan = 0; chan < num_chan; chan++) - sModemReset(ctlp, chan, 1); - msleep(500); - for (chan = 0; chan < num_chan; chan++) - sModemReset(ctlp, chan, 0); - msleep(500); - strcpy(rocketModel[i].modelString, "RocketModem ISA"); - } else { - strcpy(rocketModel[i].modelString, "RocketPort ISA"); - } - rocketModel[i].numPorts = total_num_chan; - rocketModel[i].model = MODEL_ISA; - - printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", - i, rcktpt_io_addr[i], num_aiops, type_string); - - printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n", - rocketModel[i].modelString, - rocketModel[i].startingPortNumber, - rocketModel[i].startingPortNumber + - rocketModel[i].numPorts - 1); - - return (1); -} - -static const struct tty_operations rocket_ops = { - .open = rp_open, - .close = rp_close, - .write = rp_write, - .put_char = rp_put_char, - .write_room = rp_write_room, - .chars_in_buffer = rp_chars_in_buffer, - .flush_buffer = rp_flush_buffer, - .ioctl = rp_ioctl, - .throttle = rp_throttle, - .unthrottle = rp_unthrottle, - .set_termios = rp_set_termios, - .stop = rp_stop, - .start = rp_start, - .hangup = rp_hangup, - .break_ctl = rp_break, - .send_xchar = rp_send_xchar, - .wait_until_sent = rp_wait_until_sent, - .tiocmget = rp_tiocmget, - .tiocmset = rp_tiocmset, -}; - -static const struct tty_port_operations rocket_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - -/* - * The module "startup" routine; it's run when the module is loaded. - */ -static int __init rp_init(void) -{ - int ret = -ENOMEM, pci_boards_found, isa_boards_found, i; - - printk(KERN_INFO "RocketPort device driver module, version %s, %s\n", - ROCKET_VERSION, ROCKET_DATE); - - rocket_driver = alloc_tty_driver(MAX_RP_PORTS); - if (!rocket_driver) - goto err; - - /* - * If board 1 is non-zero, there is at least one ISA configured. If controller is - * zero, use the default controller IO address of board1 + 0x40. - */ - if (board1) { - if (controller == 0) - controller = board1 + 0x40; - } else { - controller = 0; /* Used as a flag, meaning no ISA boards */ - } - - /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */ - if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) { - printk(KERN_ERR "Unable to reserve IO region for first " - "configured ISA RocketPort controller 0x%lx. " - "Driver exiting\n", controller); - ret = -EBUSY; - goto err_tty; - } - - /* Store ISA variable retrieved from command line or .conf file. */ - rcktpt_io_addr[0] = board1; - rcktpt_io_addr[1] = board2; - rcktpt_io_addr[2] = board3; - rcktpt_io_addr[3] = board4; - - rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0]; - rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1]; - rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2]; - rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3]; - - /* - * Set up the tty driver structure and then register this - * driver with the tty layer. - */ - - rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV; - rocket_driver->name = "ttyR"; - rocket_driver->driver_name = "Comtrol RocketPort"; - rocket_driver->major = TTY_ROCKET_MAJOR; - rocket_driver->minor_start = 0; - rocket_driver->type = TTY_DRIVER_TYPE_SERIAL; - rocket_driver->subtype = SERIAL_TYPE_NORMAL; - rocket_driver->init_termios = tty_std_termios; - rocket_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - rocket_driver->init_termios.c_ispeed = 9600; - rocket_driver->init_termios.c_ospeed = 9600; -#ifdef ROCKET_SOFT_FLOW - rocket_driver->flags |= TTY_DRIVER_REAL_RAW; -#endif - tty_set_operations(rocket_driver, &rocket_ops); - - ret = tty_register_driver(rocket_driver); - if (ret < 0) { - printk(KERN_ERR "Couldn't install tty RocketPort driver\n"); - goto err_controller; - } - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major); -#endif - - /* - * OK, let's probe each of the controllers looking for boards. Any boards found - * will be initialized here. - */ - isa_boards_found = 0; - pci_boards_found = 0; - - for (i = 0; i < NUM_BOARDS; i++) { - if (init_ISA(i)) - isa_boards_found++; - } - -#ifdef CONFIG_PCI - if (isa_boards_found < NUM_BOARDS) - pci_boards_found = init_PCI(isa_boards_found); -#endif - - max_board = pci_boards_found + isa_boards_found; - - if (max_board == 0) { - printk(KERN_ERR "No rocketport ports found; unloading driver\n"); - ret = -ENXIO; - goto err_ttyu; - } - - return 0; -err_ttyu: - tty_unregister_driver(rocket_driver); -err_controller: - if (controller) - release_region(controller, 4); -err_tty: - put_tty_driver(rocket_driver); -err: - return ret; -} - - -static void rp_cleanup_module(void) -{ - int retval; - int i; - - del_timer_sync(&rocket_timer); - - retval = tty_unregister_driver(rocket_driver); - if (retval) - printk(KERN_ERR "Error %d while trying to unregister " - "rocketport driver\n", -retval); - - for (i = 0; i < MAX_RP_PORTS; i++) - if (rp_table[i]) { - tty_unregister_device(rocket_driver, i); - tty_port_destroy(&rp_table[i]->port); - kfree(rp_table[i]); - } - - put_tty_driver(rocket_driver); - - for (i = 0; i < NUM_BOARDS; i++) { - if (rcktpt_io_addr[i] <= 0 || is_PCI[i]) - continue; - release_region(rcktpt_io_addr[i], 64); - } - if (controller) - release_region(controller, 4); -} - -/*************************************************************************** -Function: sInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t MudbacIO; Mudbac base I/O address. - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, - ByteIO_t * AiopIOList, int AiopIOListSize, - int IRQNum, Byte_t Frequency, int PeriodicOnly) -{ - int i; - ByteIO_t io; - int done; - - CtlP->AiopIntrBits = aiop_intr_bits; - CtlP->AltChanRingIndicator = 0; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isISA; - CtlP->MBaseIO = MudbacIO; - CtlP->MReg1IO = MudbacIO + 1; - CtlP->MReg2IO = MudbacIO + 2; - CtlP->MReg3IO = MudbacIO + 3; -#if 1 - CtlP->MReg2 = 0; /* interrupt disable */ - CtlP->MReg3 = 0; /* no periodic interrupts */ -#else - if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */ - CtlP->MReg2 = 0; /* interrupt disable */ - CtlP->MReg3 = 0; /* no periodic interrupts */ - } else { - CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */ - CtlP->MReg3 = Frequency; /* set frequency */ - if (PeriodicOnly) { /* periodic interrupt only */ - CtlP->MReg3 |= PERIODIC_ONLY; - } - } -#endif - sOutB(CtlP->MReg2IO, CtlP->MReg2); - sOutB(CtlP->MReg3IO, CtlP->MReg3); - sControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = done = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */ - sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */ - if (done) - continue; - sEnAiop(CtlP, i); /* enable the AIOP */ - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - done = 1; /* done looking for AIOPs */ - else { - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - sDisAiop(CtlP, i); /* disable AIOP */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/*************************************************************************** -Function: sReadAiopID -Purpose: Read the AIOP idenfication number directly from an AIOP. -Call: sReadAiopID(io) - ByteIO_t io: AIOP base I/O address -Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X - is replace by an identifying number. - Flag AIOPID_NULL if no valid AIOP is found -Warnings: No context switches are allowed while executing this function. - -*/ -static int sReadAiopID(ByteIO_t io) -{ - Byte_t AiopID; /* ID byte from AIOP */ - - sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */ - sOutB(io + _CMD_REG, 0x0); - AiopID = sInW(io + _CHN_STAT0) & 0x07; - if (AiopID == 0x06) - return (1); - else /* AIOP does not exist */ - return (-1); -} - -/*************************************************************************** -Function: sReadAiopNumChan -Purpose: Read the number of channels available in an AIOP directly from - an AIOP. -Call: sReadAiopNumChan(io) - WordIO_t io: AIOP base I/O address -Return: int: The number of channels available -Comments: The number of channels is determined by write/reads from identical - offsets within the SRAM address spaces for channels 0 and 4. - If the channel 4 space is mirrored to channel 0 it is a 4 channel - AIOP, otherwise it is an 8 channel. -Warnings: No context switches are allowed while executing this function. -*/ -static int sReadAiopNumChan(WordIO_t io) -{ - Word_t x; - static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 }; - - /* write to chan 0 SRAM */ - out32((DWordIO_t) io + _INDX_ADDR, R); - sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */ - x = sInW(io + _INDX_DATA); - sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */ - if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */ - return (8); - else - return (4); -} - -/*************************************************************************** -Function: sInitChan -Purpose: Initialization of a channel and channel structure -Call: sInitChan(CtlP,ChP,AiopNum,ChanNum) - CONTROLLER_T *CtlP; Ptr to controller structure - CHANNEL_T *ChP; Ptr to channel structure - int AiopNum; AIOP number within controller - int ChanNum; Channel number within AIOP -Return: int: 1 if initialization succeeded, 0 if it fails because channel - number exceeds number of channels available in AIOP. -Comments: This function must be called before a channel can be used. -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. -*/ -static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, - int ChanNum) -{ - int i; - WordIO_t AiopIO; - WordIO_t ChIOOff; - Byte_t *ChR; - Word_t ChOff; - static Byte_t R[4]; - int brd9600; - - if (ChanNum >= CtlP->AiopNumChan[AiopNum]) - return 0; /* exceeds num chans in AIOP */ - - /* Channel, AIOP, and controller identifiers */ - ChP->CtlP = CtlP; - ChP->ChanID = CtlP->AiopID[AiopNum]; - ChP->AiopNum = AiopNum; - ChP->ChanNum = ChanNum; - - /* Global direct addresses */ - AiopIO = CtlP->AiopIO[AiopNum]; - ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG; - ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN; - ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK; - ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR; - ChP->IndexData = AiopIO + _INDX_DATA; - - /* Channel direct addresses */ - ChIOOff = AiopIO + ChP->ChanNum * 2; - ChP->TxRxData = ChIOOff + _TD0; - ChP->ChanStat = ChIOOff + _CHN_STAT0; - ChP->TxRxCount = ChIOOff + _FIFO_CNT0; - ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0; - - /* Initialize the channel from the RData array */ - for (i = 0; i < RDATASIZE; i += 4) { - R[0] = RData[i]; - R[1] = RData[i + 1] + 0x10 * ChanNum; - R[2] = RData[i + 2]; - R[3] = RData[i + 3]; - out32(ChP->IndexAddr, R); - } - - ChR = ChP->R; - for (i = 0; i < RREGDATASIZE; i += 4) { - ChR[i] = RRegData[i]; - ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum; - ChR[i + 2] = RRegData[i + 2]; - ChR[i + 3] = RRegData[i + 3]; - } - - /* Indexed registers */ - ChOff = (Word_t) ChanNum *0x1000; - - if (sClockPrescale == 0x14) - brd9600 = 47; - else - brd9600 = 23; - - ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD); - ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8); - ChP->BaudDiv[2] = (Byte_t) brd9600; - ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8); - out32(ChP->IndexAddr, ChP->BaudDiv); - - ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL); - ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8); - ChP->TxControl[2] = 0; - ChP->TxControl[3] = 0; - out32(ChP->IndexAddr, ChP->TxControl); - - ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL); - ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8); - ChP->RxControl[2] = 0; - ChP->RxControl[3] = 0; - out32(ChP->IndexAddr, ChP->RxControl); - - ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS); - ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8); - ChP->TxEnables[2] = 0; - ChP->TxEnables[3] = 0; - out32(ChP->IndexAddr, ChP->TxEnables); - - ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1); - ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8); - ChP->TxCompare[2] = 0; - ChP->TxCompare[3] = 0; - out32(ChP->IndexAddr, ChP->TxCompare); - - ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1); - ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8); - ChP->TxReplace1[2] = 0; - ChP->TxReplace1[3] = 0; - out32(ChP->IndexAddr, ChP->TxReplace1); - - ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2); - ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8); - ChP->TxReplace2[2] = 0; - ChP->TxReplace2[3] = 0; - out32(ChP->IndexAddr, ChP->TxReplace2); - - ChP->TxFIFOPtrs = ChOff + _TXF_OUTP; - ChP->TxFIFO = ChOff + _TX_FIFO; - - sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */ - sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ - sOutW(ChP->IndexData, 0); - ChP->RxFIFOPtrs = ChOff + _RXF_OUTP; - ChP->RxFIFO = ChOff + _RX_FIFO; - - sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */ - sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ - sOutW(ChP->IndexData, 0); - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ - sOutW(ChP->IndexData, 0); - ChP->TxPrioCnt = ChOff + _TXP_CNT; - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt); - sOutB(ChP->IndexData, 0); - ChP->TxPrioPtr = ChOff + _TXP_PNTR; - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr); - sOutB(ChP->IndexData, 0); - ChP->TxPrioBuf = ChOff + _TXP_BUF; - sEnRxProcessor(ChP); /* start the Rx processor */ - - return 1; -} - -/*************************************************************************** -Function: sStopRxProcessor -Purpose: Stop the receive processor from processing a channel. -Call: sStopRxProcessor(ChP) - CHANNEL_T *ChP; Ptr to channel structure - -Comments: The receive processor can be started again with sStartRxProcessor(). - This function causes the receive processor to skip over the - stopped channel. It does not stop it from processing other channels. - -Warnings: No context switches are allowed while executing this function. - - Do not leave the receive processor stopped for more than one - character time. - - After calling this function a delay of 4 uS is required to ensure - that the receive processor is no longer processing this channel. -*/ -static void sStopRxProcessor(CHANNEL_T * ChP) -{ - Byte_t R[4]; - - R[0] = ChP->R[0]; - R[1] = ChP->R[1]; - R[2] = 0x0a; - R[3] = ChP->R[3]; - out32(ChP->IndexAddr, R); -} - -/*************************************************************************** -Function: sFlushRxFIFO -Purpose: Flush the Rx FIFO -Call: sFlushRxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: void -Comments: To prevent data from being enqueued or dequeued in the Tx FIFO - while it is being flushed the receive processor is stopped - and the transmitter is disabled. After these operations a - 4 uS delay is done before clearing the pointers to allow - the receive processor to stop. These items are handled inside - this function. -Warnings: No context switches are allowed while executing this function. -*/ -static void sFlushRxFIFO(CHANNEL_T * ChP) -{ - int i; - Byte_t Ch; /* channel number within AIOP */ - int RxFIFOEnabled; /* 1 if Rx FIFO enabled */ - - if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */ - return; /* don't need to flush */ - - RxFIFOEnabled = 0; - if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */ - RxFIFOEnabled = 1; - sDisRxFIFO(ChP); /* disable it */ - for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */ - sInB(ChP->IntChan); /* depends on bus i/o timing */ - } - sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */ - Ch = (Byte_t) sGetChanNum(ChP); - sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */ - sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ - sOutW(ChP->IndexData, 0); - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ - sOutW(ChP->IndexData, 0); - if (RxFIFOEnabled) - sEnRxFIFO(ChP); /* enable Rx FIFO */ -} - -/*************************************************************************** -Function: sFlushTxFIFO -Purpose: Flush the Tx FIFO -Call: sFlushTxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: void -Comments: To prevent data from being enqueued or dequeued in the Tx FIFO - while it is being flushed the receive processor is stopped - and the transmitter is disabled. After these operations a - 4 uS delay is done before clearing the pointers to allow - the receive processor to stop. These items are handled inside - this function. -Warnings: No context switches are allowed while executing this function. -*/ -static void sFlushTxFIFO(CHANNEL_T * ChP) -{ - int i; - Byte_t Ch; /* channel number within AIOP */ - int TxEnabled; /* 1 if transmitter enabled */ - - if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */ - return; /* don't need to flush */ - - TxEnabled = 0; - if (ChP->TxControl[3] & TX_ENABLE) { - TxEnabled = 1; - sDisTransmit(ChP); /* disable transmitter */ - } - sStopRxProcessor(ChP); /* stop Rx processor */ - for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */ - sInB(ChP->IntChan); /* depends on bus i/o timing */ - Ch = (Byte_t) sGetChanNum(ChP); - sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */ - sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ - sOutW(ChP->IndexData, 0); - if (TxEnabled) - sEnTransmit(ChP); /* enable transmitter */ - sStartRxProcessor(ChP); /* restart Rx processor */ -} - -/*************************************************************************** -Function: sWriteTxPrioByte -Purpose: Write a byte of priority transmit data to a channel -Call: sWriteTxPrioByte(ChP,Data) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Data; The transmit data byte - -Return: int: 1 if the bytes is successfully written, otherwise 0. - -Comments: The priority byte is transmitted before any data in the Tx FIFO. - -Warnings: No context switches are allowed while executing this function. -*/ -static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data) -{ - Byte_t DWBuf[4]; /* buffer for double word writes */ - Word_t *WordPtr; /* must be far because Win SS != DS */ - register DWordIO_t IndexAddr; - - if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */ - IndexAddr = ChP->IndexAddr; - sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */ - if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */ - return (0); /* nothing sent */ - - WordPtr = (Word_t *) (&DWBuf[0]); - *WordPtr = ChP->TxPrioBuf; /* data byte address */ - - DWBuf[2] = Data; /* data byte value */ - out32(IndexAddr, DWBuf); /* write it out */ - - *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */ - - DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */ - DWBuf[3] = 0; /* priority buffer pointer */ - out32(IndexAddr, DWBuf); /* write it out */ - } else { /* write it to Tx FIFO */ - - sWriteTxByte(sGetTxRxDataIO(ChP), Data); - } - return (1); /* 1 byte sent */ -} - -/*************************************************************************** -Function: sEnInterrupts -Purpose: Enable one or more interrupts for a channel -Call: sEnInterrupts(ChP,Flags) - CHANNEL_T *ChP; Ptr to channel structure - Word_t Flags: Interrupt enable flags, can be any combination - of the following flags: - TXINT_EN: Interrupt on Tx FIFO empty - RXINT_EN: Interrupt on Rx FIFO at trigger level (see - sSetRxTrigger()) - SRCINT_EN: Interrupt on SRC (Special Rx Condition) - MCINT_EN: Interrupt on modem input change - CHANINT_EN: Allow channel interrupt signal to the AIOP's - Interrupt Channel Register. -Return: void -Comments: If an interrupt enable flag is set in Flags, that interrupt will be - enabled. If an interrupt enable flag is not set in Flags, that - interrupt will not be changed. Interrupts can be disabled with - function sDisInterrupts(). - - This function sets the appropriate bit for the channel in the AIOP's - Interrupt Mask Register if the CHANINT_EN flag is set. This allows - this channel's bit to be set in the AIOP's Interrupt Channel Register. - - Interrupts must also be globally enabled before channel interrupts - will be passed on to the host. This is done with function - sEnGlobalInt(). - - In some cases it may be desirable to disable interrupts globally but - enable channel interrupts. This would allow the global interrupt - status register to be used to determine which AIOPs need service. -*/ -static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags) -{ - Byte_t Mask; /* Interrupt Mask Register */ - - ChP->RxControl[2] |= - ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); - - out32(ChP->IndexAddr, ChP->RxControl); - - ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN); - - out32(ChP->IndexAddr, ChP->TxControl); - - if (Flags & CHANINT_EN) { - Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum]; - sOutB(ChP->IntMask, Mask); - } -} - -/*************************************************************************** -Function: sDisInterrupts -Purpose: Disable one or more interrupts for a channel -Call: sDisInterrupts(ChP,Flags) - CHANNEL_T *ChP; Ptr to channel structure - Word_t Flags: Interrupt flags, can be any combination - of the following flags: - TXINT_EN: Interrupt on Tx FIFO empty - RXINT_EN: Interrupt on Rx FIFO at trigger level (see - sSetRxTrigger()) - SRCINT_EN: Interrupt on SRC (Special Rx Condition) - MCINT_EN: Interrupt on modem input change - CHANINT_EN: Disable channel interrupt signal to the - AIOP's Interrupt Channel Register. -Return: void -Comments: If an interrupt flag is set in Flags, that interrupt will be - disabled. If an interrupt flag is not set in Flags, that - interrupt will not be changed. Interrupts can be enabled with - function sEnInterrupts(). - - This function clears the appropriate bit for the channel in the AIOP's - Interrupt Mask Register if the CHANINT_EN flag is set. This blocks - this channel's bit from being set in the AIOP's Interrupt Channel - Register. -*/ -static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags) -{ - Byte_t Mask; /* Interrupt Mask Register */ - - ChP->RxControl[2] &= - ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); - out32(ChP->IndexAddr, ChP->RxControl); - ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN); - out32(ChP->IndexAddr, ChP->TxControl); - - if (Flags & CHANINT_EN) { - Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum]; - sOutB(ChP->IntMask, Mask); - } -} - -static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode) -{ - sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum); -} - -/* - * Not an official SSCI function, but how to reset RocketModems. - * ISA bus version - */ -static void sModemReset(CONTROLLER_T * CtlP, int chan, int on) -{ - ByteIO_t addr; - Byte_t val; - - addr = CtlP->AiopIO[0] + 0x400; - val = sInB(CtlP->MReg3IO); - /* if AIOP[1] is not enabled, enable it */ - if ((val & 2) == 0) { - val = sInB(CtlP->MReg2IO); - sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03)); - sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6)); - } - - sEnAiop(CtlP, 1); - if (!on) - addr += 8; - sOutB(addr + chan, 0); /* apply or remove reset */ - sDisAiop(CtlP, 1); -} - -/* - * Not an official SSCI function, but how to reset RocketModems. - * PCI bus version - */ -static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on) -{ - ByteIO_t addr; - - addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */ - if (!on) - addr += 8; - sOutB(addr + chan, 0); /* apply or remove reset */ -} - -/* Returns the line number given the controller (board), aiop and channel number */ -static unsigned char GetLineNumber(int ctrl, int aiop, int ch) -{ - return lineNumbers[(ctrl << 5) | (aiop << 3) | ch]; -} - -/* - * Stores the line number associated with a given controller (board), aiop - * and channel number. - * Returns: The line number assigned - */ -static unsigned char SetLineNumber(int ctrl, int aiop, int ch) -{ - lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++; - return (nextLineNumber - 1); -} diff --git a/drivers/tty/rocket.h b/drivers/tty/rocket.h deleted file mode 100644 index d62ed6587f32..000000000000 --- a/drivers/tty/rocket.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * rocket.h --- the exported interface of the rocket driver to its configuration program. - * - * Written by Theodore Ts'o, Copyright 1997. - * Copyright 1997 Comtrol Corporation. - * - */ - -/* Model Information Struct */ -typedef struct { - unsigned long model; - char modelString[80]; - unsigned long numPorts; - int loadrm2; - int startingPortNumber; -} rocketModel_t; - -struct rocket_config { - int line; - int flags; - int closing_wait; - int close_delay; - int port; - int reserved[32]; -}; - -struct rocket_ports { - int tty_major; - int callout_major; - rocketModel_t rocketModel[8]; -}; - -struct rocket_version { - char rocket_version[32]; - char rocket_date[32]; - char reserved[64]; -}; - -/* - * Rocketport flags - */ -/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */ -#define ROCKET_FORCE_CD 0x00000002 -#define ROCKET_HUP_NOTIFY 0x00000004 -#define ROCKET_SPLIT_TERMIOS 0x00000008 -#define ROCKET_SPD_MASK 0x00000070 -#define ROCKET_SPD_HI 0x00000010 /* Use 57600 instead of 38400 bps */ -#define ROCKET_SPD_VHI 0x00000020 /* Use 115200 instead of 38400 bps */ -#define ROCKET_SPD_SHI 0x00000030 /* Use 230400 instead of 38400 bps */ -#define ROCKET_SPD_WARP 0x00000040 /* Use 460800 instead of 38400 bps */ -#define ROCKET_SAK 0x00000080 -#define ROCKET_SESSION_LOCKOUT 0x00000100 -#define ROCKET_PGRP_LOCKOUT 0x00000200 -#define ROCKET_RTS_TOGGLE 0x00000400 -#define ROCKET_MODE_MASK 0x00003000 -#define ROCKET_MODE_RS232 0x00000000 -#define ROCKET_MODE_RS485 0x00001000 -#define ROCKET_MODE_RS422 0x00002000 -#define ROCKET_FLAGS 0x00003FFF - -#define ROCKET_USR_MASK 0x0071 /* Legal flags that non-privileged - * users can set or reset */ - -/* - * For closing_wait and closing_wait2 - */ -#define ROCKET_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE -#define ROCKET_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF - -/* - * Rocketport ioctls -- "RP" - */ -#define RCKP_GET_CONFIG 0x00525002 -#define RCKP_SET_CONFIG 0x00525003 -#define RCKP_GET_PORTS 0x00525004 -#define RCKP_RESET_RM2 0x00525005 -#define RCKP_GET_VERSION 0x00525006 - -/* Rocketport Models */ -#define MODEL_RP32INTF 0x0001 /* RP 32 port w/external I/F */ -#define MODEL_RP8INTF 0x0002 /* RP 8 port w/external I/F */ -#define MODEL_RP16INTF 0x0003 /* RP 16 port w/external I/F */ -#define MODEL_RP8OCTA 0x0005 /* RP 8 port w/octa cable */ -#define MODEL_RP4QUAD 0x0004 /* RP 4 port w/quad cable */ -#define MODEL_RP8J 0x0006 /* RP 8 port w/RJ11 connectors */ -#define MODEL_RP4J 0x0007 /* RP 4 port w/RJ45 connectors */ -#define MODEL_RP8SNI 0x0008 /* RP 8 port w/ DB78 SNI connector */ -#define MODEL_RP16SNI 0x0009 /* RP 16 port w/ DB78 SNI connector */ -#define MODEL_RPP4 0x000A /* RP Plus 4 port */ -#define MODEL_RPP8 0x000B /* RP Plus 8 port */ -#define MODEL_RP2_232 0x000E /* RP Plus 2 port RS232 */ -#define MODEL_RP2_422 0x000F /* RP Plus 2 port RS232 */ - -/* Rocketmodem II Models */ -#define MODEL_RP6M 0x000C /* RM 6 port */ -#define MODEL_RP4M 0x000D /* RM 4 port */ - -/* Universal PCI boards */ -#define MODEL_UPCI_RP32INTF 0x0801 /* RP UPCI 32 port w/external I/F */ -#define MODEL_UPCI_RP8INTF 0x0802 /* RP UPCI 8 port w/external I/F */ -#define MODEL_UPCI_RP16INTF 0x0803 /* RP UPCI 16 port w/external I/F */ -#define MODEL_UPCI_RP8OCTA 0x0805 /* RP UPCI 8 port w/octa cable */ -#define MODEL_UPCI_RM3_8PORT 0x080C /* RP UPCI Rocketmodem III 8 port */ -#define MODEL_UPCI_RM3_4PORT 0x080C /* RP UPCI Rocketmodem III 4 port */ - -/* Compact PCI 16 port */ -#define MODEL_CPCI_RP16INTF 0x0903 /* RP Compact PCI 16 port w/external I/F */ - -/* All ISA boards */ -#define MODEL_ISA 0x1000 diff --git a/drivers/tty/rocket_int.h b/drivers/tty/rocket_int.h deleted file mode 100644 index 727e50dbb92f..000000000000 --- a/drivers/tty/rocket_int.h +++ /dev/null @@ -1,1214 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * rocket_int.h --- internal header file for rocket.c - * - * Written by Theodore Ts'o, Copyright 1997. - * Copyright 1997 Comtrol Corporation. - * - */ - -/* - * Definition of the types in rcktpt_type - */ -#define ROCKET_TYPE_NORMAL 0 -#define ROCKET_TYPE_MODEM 1 -#define ROCKET_TYPE_MODEMII 2 -#define ROCKET_TYPE_MODEMIII 3 -#define ROCKET_TYPE_PC104 4 - -#include - -#include -#include - -typedef unsigned char Byte_t; -typedef unsigned int ByteIO_t; - -typedef unsigned int Word_t; -typedef unsigned int WordIO_t; - -typedef unsigned int DWordIO_t; - -/* - * Note! Normally the Linux I/O macros already take care of - * byte-swapping the I/O instructions. However, all accesses using - * sOutDW aren't really 32-bit accesses, but should be handled in byte - * order. Hence the use of the cpu_to_le32() macro to byte-swap - * things to no-op the byte swapping done by the big-endian outl() - * instruction. - */ - -static inline void sOutB(unsigned short port, unsigned char value) -{ -#ifdef ROCKET_DEBUG_IO - printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value); -#endif - outb_p(value, port); -} - -static inline void sOutW(unsigned short port, unsigned short value) -{ -#ifdef ROCKET_DEBUG_IO - printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value); -#endif - outw_p(value, port); -} - -static inline void out32(unsigned short port, Byte_t *p) -{ - u32 value = get_unaligned_le32(p); -#ifdef ROCKET_DEBUG_IO - printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value); -#endif - outl_p(value, port); -} - -static inline unsigned char sInB(unsigned short port) -{ - return inb_p(port); -} - -static inline unsigned short sInW(unsigned short port) -{ - return inw_p(port); -} - -/* This is used to move arrays of bytes so byte swapping isn't appropriate. */ -#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count) -#define sInStrW(port, addr, count) if (count) insw(port, addr, count) - -#define CTL_SIZE 8 -#define AIOP_CTL_SIZE 4 -#define CHAN_AIOP_SIZE 8 -#define MAX_PORTS_PER_AIOP 8 -#define MAX_AIOPS_PER_BOARD 4 -#define MAX_PORTS_PER_BOARD 32 - -/* Bus type ID */ -#define isISA 0 -#define isPCI 1 -#define isMC 2 - -/* Controller ID numbers */ -#define CTLID_NULL -1 /* no controller exists */ -#define CTLID_0001 0x0001 /* controller release 1 */ - -/* AIOP ID numbers, identifies AIOP type implementing channel */ -#define AIOPID_NULL -1 /* no AIOP or channel exists */ -#define AIOPID_0001 0x0001 /* AIOP release 1 */ - -/************************************************************************ - Global Register Offsets - Direct Access - Fixed values -************************************************************************/ - -#define _CMD_REG 0x38 /* Command Register 8 Write */ -#define _INT_CHAN 0x39 /* Interrupt Channel Register 8 Read */ -#define _INT_MASK 0x3A /* Interrupt Mask Register 8 Read / Write */ -#define _UNUSED 0x3B /* Unused 8 */ -#define _INDX_ADDR 0x3C /* Index Register Address 16 Write */ -#define _INDX_DATA 0x3E /* Index Register Data 8/16 Read / Write */ - -/************************************************************************ - Channel Register Offsets for 1st channel in AIOP - Direct Access -************************************************************************/ -#define _TD0 0x00 /* Transmit Data 16 Write */ -#define _RD0 0x00 /* Receive Data 16 Read */ -#define _CHN_STAT0 0x20 /* Channel Status 8/16 Read / Write */ -#define _FIFO_CNT0 0x10 /* Transmit/Receive FIFO Count 16 Read */ -#define _INT_ID0 0x30 /* Interrupt Identification 8 Read */ - -/************************************************************************ - Tx Control Register Offsets - Indexed - External - Fixed -************************************************************************/ -#define _TX_ENBLS 0x980 /* Tx Processor Enables Register 8 Read / Write */ -#define _TXCMP1 0x988 /* Transmit Compare Value #1 8 Read / Write */ -#define _TXCMP2 0x989 /* Transmit Compare Value #2 8 Read / Write */ -#define _TXREP1B1 0x98A /* Tx Replace Value #1 - Byte 1 8 Read / Write */ -#define _TXREP1B2 0x98B /* Tx Replace Value #1 - Byte 2 8 Read / Write */ -#define _TXREP2 0x98C /* Transmit Replace Value #2 8 Read / Write */ - -/************************************************************************ -Memory Controller Register Offsets - Indexed - External - Fixed -************************************************************************/ -#define _RX_FIFO 0x000 /* Rx FIFO */ -#define _TX_FIFO 0x800 /* Tx FIFO */ -#define _RXF_OUTP 0x990 /* Rx FIFO OUT pointer 16 Read / Write */ -#define _RXF_INP 0x992 /* Rx FIFO IN pointer 16 Read / Write */ -#define _TXF_OUTP 0x994 /* Tx FIFO OUT pointer 8 Read / Write */ -#define _TXF_INP 0x995 /* Tx FIFO IN pointer 8 Read / Write */ -#define _TXP_CNT 0x996 /* Tx Priority Count 8 Read / Write */ -#define _TXP_PNTR 0x997 /* Tx Priority Pointer 8 Read / Write */ - -#define PRI_PEND 0x80 /* Priority data pending (bit7, Tx pri cnt) */ -#define TXFIFO_SIZE 255 /* size of Tx FIFO */ -#define RXFIFO_SIZE 1023 /* size of Rx FIFO */ - -/************************************************************************ -Tx Priority Buffer - Indexed - External - Fixed -************************************************************************/ -#define _TXP_BUF 0x9C0 /* Tx Priority Buffer 32 Bytes Read / Write */ -#define TXP_SIZE 0x20 /* 32 bytes */ - -/************************************************************************ -Channel Register Offsets - Indexed - Internal - Fixed -************************************************************************/ - -#define _TX_CTRL 0xFF0 /* Transmit Control 16 Write */ -#define _RX_CTRL 0xFF2 /* Receive Control 8 Write */ -#define _BAUD 0xFF4 /* Baud Rate 16 Write */ -#define _CLK_PRE 0xFF6 /* Clock Prescaler 8 Write */ - -#define STMBREAK 0x08 /* BREAK */ -#define STMFRAME 0x04 /* framing error */ -#define STMRCVROVR 0x02 /* receiver over run error */ -#define STMPARITY 0x01 /* parity error */ -#define STMERROR (STMBREAK | STMFRAME | STMPARITY) -#define STMBREAKH 0x800 /* BREAK */ -#define STMFRAMEH 0x400 /* framing error */ -#define STMRCVROVRH 0x200 /* receiver over run error */ -#define STMPARITYH 0x100 /* parity error */ -#define STMERRORH (STMBREAKH | STMFRAMEH | STMPARITYH) - -#define CTS_ACT 0x20 /* CTS input asserted */ -#define DSR_ACT 0x10 /* DSR input asserted */ -#define CD_ACT 0x08 /* CD input asserted */ -#define TXFIFOMT 0x04 /* Tx FIFO is empty */ -#define TXSHRMT 0x02 /* Tx shift register is empty */ -#define RDA 0x01 /* Rx data available */ -#define DRAINED (TXFIFOMT | TXSHRMT) /* indicates Tx is drained */ - -#define STATMODE 0x8000 /* status mode enable bit */ -#define RXFOVERFL 0x2000 /* receive FIFO overflow */ -#define RX2MATCH 0x1000 /* receive compare byte 2 match */ -#define RX1MATCH 0x0800 /* receive compare byte 1 match */ -#define RXBREAK 0x0400 /* received BREAK */ -#define RXFRAME 0x0200 /* received framing error */ -#define RXPARITY 0x0100 /* received parity error */ -#define STATERROR (RXBREAK | RXFRAME | RXPARITY) - -#define CTSFC_EN 0x80 /* CTS flow control enable bit */ -#define RTSTOG_EN 0x40 /* RTS toggle enable bit */ -#define TXINT_EN 0x10 /* transmit interrupt enable */ -#define STOP2 0x08 /* enable 2 stop bits (0 = 1 stop) */ -#define PARITY_EN 0x04 /* enable parity (0 = no parity) */ -#define EVEN_PAR 0x02 /* even parity (0 = odd parity) */ -#define DATA8BIT 0x01 /* 8 bit data (0 = 7 bit data) */ - -#define SETBREAK 0x10 /* send break condition (must clear) */ -#define LOCALLOOP 0x08 /* local loopback set for test */ -#define SET_DTR 0x04 /* assert DTR */ -#define SET_RTS 0x02 /* assert RTS */ -#define TX_ENABLE 0x01 /* enable transmitter */ - -#define RTSFC_EN 0x40 /* RTS flow control enable */ -#define RXPROC_EN 0x20 /* receive processor enable */ -#define TRIG_NO 0x00 /* Rx FIFO trigger level 0 (no trigger) */ -#define TRIG_1 0x08 /* trigger level 1 char */ -#define TRIG_1_2 0x10 /* trigger level 1/2 */ -#define TRIG_7_8 0x18 /* trigger level 7/8 */ -#define TRIG_MASK 0x18 /* trigger level mask */ -#define SRCINT_EN 0x04 /* special Rx condition interrupt enable */ -#define RXINT_EN 0x02 /* Rx interrupt enable */ -#define MCINT_EN 0x01 /* modem change interrupt enable */ - -#define RXF_TRIG 0x20 /* Rx FIFO trigger level interrupt */ -#define TXFIFO_MT 0x10 /* Tx FIFO empty interrupt */ -#define SRC_INT 0x08 /* special receive condition interrupt */ -#define DELTA_CD 0x04 /* CD change interrupt */ -#define DELTA_CTS 0x02 /* CTS change interrupt */ -#define DELTA_DSR 0x01 /* DSR change interrupt */ - -#define REP1W2_EN 0x10 /* replace byte 1 with 2 bytes enable */ -#define IGN2_EN 0x08 /* ignore byte 2 enable */ -#define IGN1_EN 0x04 /* ignore byte 1 enable */ -#define COMP2_EN 0x02 /* compare byte 2 enable */ -#define COMP1_EN 0x01 /* compare byte 1 enable */ - -#define RESET_ALL 0x80 /* reset AIOP (all channels) */ -#define TXOVERIDE 0x40 /* Transmit software off override */ -#define RESETUART 0x20 /* reset channel's UART */ -#define RESTXFCNT 0x10 /* reset channel's Tx FIFO count register */ -#define RESRXFCNT 0x08 /* reset channel's Rx FIFO count register */ - -#define INTSTAT0 0x01 /* AIOP 0 interrupt status */ -#define INTSTAT1 0x02 /* AIOP 1 interrupt status */ -#define INTSTAT2 0x04 /* AIOP 2 interrupt status */ -#define INTSTAT3 0x08 /* AIOP 3 interrupt status */ - -#define INTR_EN 0x08 /* allow interrupts to host */ -#define INT_STROB 0x04 /* strobe and clear interrupt line (EOI) */ - -/************************************************************************** - MUDBAC remapped for PCI -**************************************************************************/ - -#define _CFG_INT_PCI 0x40 -#define _PCI_INT_FUNC 0x3A - -#define PCI_STROB 0x2000 /* bit 13 of int aiop register */ -#define INTR_EN_PCI 0x0010 /* allow interrupts to host */ - -/* - * Definitions for Universal PCI board registers - */ -#define _PCI_9030_INT_CTRL 0x4c /* Offsets from BAR1 */ -#define _PCI_9030_GPIO_CTRL 0x54 -#define PCI_INT_CTRL_AIOP 0x0001 -#define PCI_GPIO_CTRL_8PORT 0x4000 -#define _PCI_9030_RING_IND 0xc0 /* Offsets from BAR1 */ - -#define CHAN3_EN 0x08 /* enable AIOP 3 */ -#define CHAN2_EN 0x04 /* enable AIOP 2 */ -#define CHAN1_EN 0x02 /* enable AIOP 1 */ -#define CHAN0_EN 0x01 /* enable AIOP 0 */ -#define FREQ_DIS 0x00 -#define FREQ_274HZ 0x60 -#define FREQ_137HZ 0x50 -#define FREQ_69HZ 0x40 -#define FREQ_34HZ 0x30 -#define FREQ_17HZ 0x20 -#define FREQ_9HZ 0x10 -#define PERIODIC_ONLY 0x80 /* only PERIODIC interrupt */ - -#define CHANINT_EN 0x0100 /* flags to enable/disable channel ints */ - -#define RDATASIZE 72 -#define RREGDATASIZE 52 - -/* - * AIOP interrupt bits for ISA/PCI boards and UPCI boards. - */ -#define AIOP_INTR_BIT_0 0x0001 -#define AIOP_INTR_BIT_1 0x0002 -#define AIOP_INTR_BIT_2 0x0004 -#define AIOP_INTR_BIT_3 0x0008 - -#define AIOP_INTR_BITS ( \ - AIOP_INTR_BIT_0 \ - | AIOP_INTR_BIT_1 \ - | AIOP_INTR_BIT_2 \ - | AIOP_INTR_BIT_3) - -#define UPCI_AIOP_INTR_BIT_0 0x0004 -#define UPCI_AIOP_INTR_BIT_1 0x0020 -#define UPCI_AIOP_INTR_BIT_2 0x0100 -#define UPCI_AIOP_INTR_BIT_3 0x0800 - -#define UPCI_AIOP_INTR_BITS ( \ - UPCI_AIOP_INTR_BIT_0 \ - | UPCI_AIOP_INTR_BIT_1 \ - | UPCI_AIOP_INTR_BIT_2 \ - | UPCI_AIOP_INTR_BIT_3) - -/* Controller level information structure */ -typedef struct { - int CtlID; - int CtlNum; - int BusType; - int boardType; - int isUPCI; - WordIO_t PCIIO; - WordIO_t PCIIO2; - ByteIO_t MBaseIO; - ByteIO_t MReg1IO; - ByteIO_t MReg2IO; - ByteIO_t MReg3IO; - Byte_t MReg2; - Byte_t MReg3; - int NumAiop; - int AltChanRingIndicator; - ByteIO_t UPCIRingInd; - WordIO_t AiopIO[AIOP_CTL_SIZE]; - ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE]; - int AiopID[AIOP_CTL_SIZE]; - int AiopNumChan[AIOP_CTL_SIZE]; - Word_t *AiopIntrBits; -} CONTROLLER_T; - -typedef CONTROLLER_T CONTROLLER_t; - -/* Channel level information structure */ -typedef struct { - CONTROLLER_T *CtlP; - int AiopNum; - int ChanID; - int ChanNum; - int rtsToggle; - - ByteIO_t Cmd; - ByteIO_t IntChan; - ByteIO_t IntMask; - DWordIO_t IndexAddr; - WordIO_t IndexData; - - WordIO_t TxRxData; - WordIO_t ChanStat; - WordIO_t TxRxCount; - ByteIO_t IntID; - - Word_t TxFIFO; - Word_t TxFIFOPtrs; - Word_t RxFIFO; - Word_t RxFIFOPtrs; - Word_t TxPrioCnt; - Word_t TxPrioPtr; - Word_t TxPrioBuf; - - Byte_t R[RREGDATASIZE]; - - Byte_t BaudDiv[4]; - Byte_t TxControl[4]; - Byte_t RxControl[4]; - Byte_t TxEnables[4]; - Byte_t TxCompare[4]; - Byte_t TxReplace1[4]; - Byte_t TxReplace2[4]; -} CHANNEL_T; - -typedef CHANNEL_T CHANNEL_t; -typedef CHANNEL_T *CHANPTR_T; - -#define InterfaceModeRS232 0x00 -#define InterfaceModeRS422 0x08 -#define InterfaceModeRS485 0x10 -#define InterfaceModeRS232T 0x18 - -/*************************************************************************** -Function: sClrBreak -Purpose: Stop sending a transmit BREAK signal -Call: sClrBreak(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrBreak(ChP) \ -do { \ - (ChP)->TxControl[3] &= ~SETBREAK; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sClrDTR -Purpose: Clr the DTR output -Call: sClrDTR(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrDTR(ChP) \ -do { \ - (ChP)->TxControl[3] &= ~SET_DTR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sClrRTS -Purpose: Clr the RTS output -Call: sClrRTS(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrRTS(ChP) \ -do { \ - if ((ChP)->rtsToggle) break; \ - (ChP)->TxControl[3] &= ~SET_RTS; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sClrTxXOFF -Purpose: Clear any existing transmit software flow control off condition -Call: sClrTxXOFF(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrTxXOFF(ChP) \ -do { \ - sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \ - sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \ -} while (0) - -/*************************************************************************** -Function: sCtlNumToCtlPtr -Purpose: Convert a controller number to controller structure pointer -Call: sCtlNumToCtlPtr(CtlNum) - int CtlNum; Controller number -Return: CONTROLLER_T *: Ptr to controller structure -*/ -#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM] - -/*************************************************************************** -Function: sControllerEOI -Purpose: Strobe the MUDBAC's End Of Interrupt bit. -Call: sControllerEOI(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -*/ -#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB) - -/*************************************************************************** -Function: sPCIControllerEOI -Purpose: Strobe the PCI End Of Interrupt bit. - For the UPCI boards, toggle the AIOP interrupt enable bit - (this was taken from the Windows driver). -Call: sPCIControllerEOI(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -*/ -#define sPCIControllerEOI(CTLP) \ -do { \ - if ((CTLP)->isUPCI) { \ - Word_t w = sInW((CTLP)->PCIIO); \ - sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \ - sOutW((CTLP)->PCIIO, w); \ - } \ - else { \ - sOutW((CTLP)->PCIIO, PCI_STROB); \ - } \ -} while (0) - -/*************************************************************************** -Function: sDisAiop -Purpose: Disable I/O access to an AIOP -Call: sDisAiop(CltP) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; Number of AIOP on controller -*/ -#define sDisAiop(CTLP,AIOPNUM) \ -do { \ - (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \ - sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ -} while (0) - -/*************************************************************************** -Function: sDisCTSFlowCtl -Purpose: Disable output flow control using CTS -Call: sDisCTSFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisCTSFlowCtl(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~CTSFC_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sDisIXANY -Purpose: Disable IXANY Software Flow Control -Call: sDisIXANY(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisIXANY(ChP) \ -do { \ - (ChP)->R[0x0e] = 0x86; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ -} while (0) - -/*************************************************************************** -Function: DisParity -Purpose: Disable parity -Call: sDisParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). -*/ -#define sDisParity(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~PARITY_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sDisRTSToggle -Purpose: Disable RTS toggle -Call: sDisRTSToggle(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisRTSToggle(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~RTSTOG_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ - (ChP)->rtsToggle = 0; \ -} while (0) - -/*************************************************************************** -Function: sDisRxFIFO -Purpose: Disable Rx FIFO -Call: sDisRxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisRxFIFO(ChP) \ -do { \ - (ChP)->R[0x32] = 0x0a; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ -} while (0) - -/*************************************************************************** -Function: sDisRxStatusMode -Purpose: Disable the Rx status mode -Call: sDisRxStatusMode(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This takes the channel out of the receive status mode. All - subsequent reads of receive data using sReadRxWord() will return - two data bytes. -*/ -#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0) - -/*************************************************************************** -Function: sDisTransmit -Purpose: Disable transmit -Call: sDisTransmit(ChP) - CHANNEL_T *ChP; Ptr to channel structure - This disables movement of Tx data from the Tx FIFO into the 1 byte - Tx buffer. Therefore there could be up to a 2 byte latency - between the time sDisTransmit() is called and the transmit buffer - and transmit shift register going completely empty. -*/ -#define sDisTransmit(ChP) \ -do { \ - (ChP)->TxControl[3] &= ~TX_ENABLE; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sDisTxSoftFlowCtl -Purpose: Disable Tx Software Flow Control -Call: sDisTxSoftFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisTxSoftFlowCtl(ChP) \ -do { \ - (ChP)->R[0x06] = 0x8a; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ -} while (0) - -/*************************************************************************** -Function: sEnAiop -Purpose: Enable I/O access to an AIOP -Call: sEnAiop(CltP) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; Number of AIOP on controller -*/ -#define sEnAiop(CTLP,AIOPNUM) \ -do { \ - (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \ - sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ -} while (0) - -/*************************************************************************** -Function: sEnCTSFlowCtl -Purpose: Enable output flow control using CTS -Call: sEnCTSFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnCTSFlowCtl(ChP) \ -do { \ - (ChP)->TxControl[2] |= CTSFC_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnIXANY -Purpose: Enable IXANY Software Flow Control -Call: sEnIXANY(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnIXANY(ChP) \ -do { \ - (ChP)->R[0x0e] = 0x21; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ -} while (0) - -/*************************************************************************** -Function: EnParity -Purpose: Enable parity -Call: sEnParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). - -Warnings: Before enabling parity odd or even parity should be chosen using - functions sSetOddParity() or sSetEvenParity(). -*/ -#define sEnParity(ChP) \ -do { \ - (ChP)->TxControl[2] |= PARITY_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnRTSToggle -Purpose: Enable RTS toggle -Call: sEnRTSToggle(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This function will disable RTS flow control and clear the RTS - line to allow operation of RTS toggle. -*/ -#define sEnRTSToggle(ChP) \ -do { \ - (ChP)->RxControl[2] &= ~RTSFC_EN; \ - out32((ChP)->IndexAddr,(ChP)->RxControl); \ - (ChP)->TxControl[2] |= RTSTOG_EN; \ - (ChP)->TxControl[3] &= ~SET_RTS; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ - (ChP)->rtsToggle = 1; \ -} while (0) - -/*************************************************************************** -Function: sEnRxFIFO -Purpose: Enable Rx FIFO -Call: sEnRxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnRxFIFO(ChP) \ -do { \ - (ChP)->R[0x32] = 0x08; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ -} while (0) - -/*************************************************************************** -Function: sEnRxProcessor -Purpose: Enable the receive processor -Call: sEnRxProcessor(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This function is used to start the receive processor. When - the channel is in the reset state the receive processor is not - running. This is done to prevent the receive processor from - executing invalid microcode instructions prior to the - downloading of the microcode. - -Warnings: This function must be called after valid microcode has been - downloaded to the AIOP, and it must not be called before the - microcode has been downloaded. -*/ -#define sEnRxProcessor(ChP) \ -do { \ - (ChP)->RxControl[2] |= RXPROC_EN; \ - out32((ChP)->IndexAddr,(ChP)->RxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnRxStatusMode -Purpose: Enable the Rx status mode -Call: sEnRxStatusMode(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This places the channel in the receive status mode. All subsequent - reads of receive data using sReadRxWord() will return a data byte - in the low word and a status byte in the high word. - -*/ -#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE) - -/*************************************************************************** -Function: sEnTransmit -Purpose: Enable transmit -Call: sEnTransmit(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnTransmit(ChP) \ -do { \ - (ChP)->TxControl[3] |= TX_ENABLE; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnTxSoftFlowCtl -Purpose: Enable Tx Software Flow Control -Call: sEnTxSoftFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnTxSoftFlowCtl(ChP) \ -do { \ - (ChP)->R[0x06] = 0xc5; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ -} while (0) - -/*************************************************************************** -Function: sGetAiopIntStatus -Purpose: Get the AIOP interrupt status -Call: sGetAiopIntStatus(CtlP,AiopNum) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; AIOP number -Return: Byte_t: The AIOP interrupt status. Bits 0 through 7 - represent channels 0 through 7 respectively. If a - bit is set that channel is interrupting. -*/ -#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM]) - -/*************************************************************************** -Function: sGetAiopNumChan -Purpose: Get the number of channels supported by an AIOP -Call: sGetAiopNumChan(CtlP,AiopNum) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; AIOP number -Return: int: The number of channels supported by the AIOP -*/ -#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM] - -/*************************************************************************** -Function: sGetChanIntID -Purpose: Get a channel's interrupt identification byte -Call: sGetChanIntID(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Byte_t: The channel interrupt ID. Can be any - combination of the following flags: - RXF_TRIG: Rx FIFO trigger level interrupt - TXFIFO_MT: Tx FIFO empty interrupt - SRC_INT: Special receive condition interrupt - DELTA_CD: CD change interrupt - DELTA_CTS: CTS change interrupt - DELTA_DSR: DSR change interrupt -*/ -#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR)) - -/*************************************************************************** -Function: sGetChanNum -Purpose: Get the number of a channel within an AIOP -Call: sGetChanNum(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: int: Channel number within AIOP, or NULLCHAN if channel does - not exist. -*/ -#define sGetChanNum(ChP) (ChP)->ChanNum - -/*************************************************************************** -Function: sGetChanStatus -Purpose: Get the channel status -Call: sGetChanStatus(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Word_t: The channel status. Can be any combination of - the following flags: - LOW BYTE FLAGS - CTS_ACT: CTS input asserted - DSR_ACT: DSR input asserted - CD_ACT: CD input asserted - TXFIFOMT: Tx FIFO is empty - TXSHRMT: Tx shift register is empty - RDA: Rx data available - - HIGH BYTE FLAGS - STATMODE: status mode enable bit - RXFOVERFL: receive FIFO overflow - RX2MATCH: receive compare byte 2 match - RX1MATCH: receive compare byte 1 match - RXBREAK: received BREAK - RXFRAME: received framing error - RXPARITY: received parity error -Warnings: This function will clear the high byte flags in the Channel - Status Register. -*/ -#define sGetChanStatus(ChP) sInW((ChP)->ChanStat) - -/*************************************************************************** -Function: sGetChanStatusLo -Purpose: Get the low byte only of the channel status -Call: sGetChanStatusLo(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Byte_t: The channel status low byte. Can be any combination - of the following flags: - CTS_ACT: CTS input asserted - DSR_ACT: DSR input asserted - CD_ACT: CD input asserted - TXFIFOMT: Tx FIFO is empty - TXSHRMT: Tx shift register is empty - RDA: Rx data available -*/ -#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat) - -/********************************************************************** - * Get RI status of channel - * Defined as a function in rocket.c -aes - */ -#if 0 -#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \ - (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \ - (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \ - (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \ - 0)) -#endif - -/*************************************************************************** -Function: sGetControllerIntStatus -Purpose: Get the controller interrupt status -Call: sGetControllerIntStatus(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -Return: Byte_t: The controller interrupt status in the lower 4 - bits. Bits 0 through 3 represent AIOP's 0 - through 3 respectively. If a bit is set that - AIOP is interrupting. Bits 4 through 7 will - always be cleared. -*/ -#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f) - -/*************************************************************************** -Function: sPCIGetControllerIntStatus -Purpose: Get the controller interrupt status -Call: sPCIGetControllerIntStatus(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -Return: unsigned char: The controller interrupt status in the lower 4 - bits and bit 4. Bits 0 through 3 represent AIOP's 0 - through 3 respectively. Bit 4 is set if the int - was generated from periodic. If a bit is set the - AIOP is interrupting. -*/ -#define sPCIGetControllerIntStatus(CTLP) \ - ((CTLP)->isUPCI ? \ - (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \ - ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS)) - -/*************************************************************************** - -Function: sGetRxCnt -Purpose: Get the number of data bytes in the Rx FIFO -Call: sGetRxCnt(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: int: The number of data bytes in the Rx FIFO. -Comments: Byte read of count register is required to obtain Rx count. - -*/ -#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount) - -/*************************************************************************** -Function: sGetTxCnt -Purpose: Get the number of data bytes in the Tx FIFO -Call: sGetTxCnt(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Byte_t: The number of data bytes in the Tx FIFO. -Comments: Byte read of count register is required to obtain Tx count. - -*/ -#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount) - -/***************************************************************************** -Function: sGetTxRxDataIO -Purpose: Get the I/O address of a channel's TxRx Data register -Call: sGetTxRxDataIO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: WordIO_t: I/O address of a channel's TxRx Data register -*/ -#define sGetTxRxDataIO(ChP) (ChP)->TxRxData - -/*************************************************************************** -Function: sInitChanDefaults -Purpose: Initialize a channel structure to it's default state. -Call: sInitChanDefaults(ChP) - CHANNEL_T *ChP; Ptr to the channel structure -Comments: This function must be called once for every channel structure - that exists before any other SSCI calls can be made. - -*/ -#define sInitChanDefaults(ChP) \ -do { \ - (ChP)->CtlP = NULLCTLPTR; \ - (ChP)->AiopNum = NULLAIOP; \ - (ChP)->ChanID = AIOPID_NULL; \ - (ChP)->ChanNum = NULLCHAN; \ -} while (0) - -/*************************************************************************** -Function: sResetAiopByNum -Purpose: Reset the AIOP by number -Call: sResetAiopByNum(CTLP,AIOPNUM) - CONTROLLER_T CTLP; Ptr to controller structure - AIOPNUM; AIOP index -*/ -#define sResetAiopByNum(CTLP,AIOPNUM) \ -do { \ - sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \ - sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \ -} while (0) - -/*************************************************************************** -Function: sSendBreak -Purpose: Send a transmit BREAK signal -Call: sSendBreak(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSendBreak(ChP) \ -do { \ - (ChP)->TxControl[3] |= SETBREAK; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetBaud -Purpose: Set baud rate -Call: sSetBaud(ChP,Divisor) - CHANNEL_T *ChP; Ptr to channel structure - Word_t Divisor; 16 bit baud rate divisor for channel -*/ -#define sSetBaud(ChP,DIVISOR) \ -do { \ - (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \ - (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \ - out32((ChP)->IndexAddr,(ChP)->BaudDiv); \ -} while (0) - -/*************************************************************************** -Function: sSetData7 -Purpose: Set data bits to 7 -Call: sSetData7(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetData7(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~DATA8BIT; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetData8 -Purpose: Set data bits to 8 -Call: sSetData8(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetData8(ChP) \ -do { \ - (ChP)->TxControl[2] |= DATA8BIT; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetDTR -Purpose: Set the DTR output -Call: sSetDTR(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetDTR(ChP) \ -do { \ - (ChP)->TxControl[3] |= SET_DTR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetEvenParity -Purpose: Set even parity -Call: sSetEvenParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). - -Warnings: This function has no effect unless parity is enabled with function - sEnParity(). -*/ -#define sSetEvenParity(ChP) \ -do { \ - (ChP)->TxControl[2] |= EVEN_PAR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetOddParity -Purpose: Set odd parity -Call: sSetOddParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). - -Warnings: This function has no effect unless parity is enabled with function - sEnParity(). -*/ -#define sSetOddParity(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~EVEN_PAR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetRTS -Purpose: Set the RTS output -Call: sSetRTS(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetRTS(ChP) \ -do { \ - if ((ChP)->rtsToggle) break; \ - (ChP)->TxControl[3] |= SET_RTS; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetRxTrigger -Purpose: Set the Rx FIFO trigger level -Call: sSetRxProcessor(ChP,Level) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Level; Number of characters in Rx FIFO at which the - interrupt will be generated. Can be any of the following flags: - - TRIG_NO: no trigger - TRIG_1: 1 character in FIFO - TRIG_1_2: FIFO 1/2 full - TRIG_7_8: FIFO 7/8 full -Comments: An interrupt will be generated when the trigger level is reached - only if function sEnInterrupt() has been called with flag - RXINT_EN set. The RXF_TRIG flag in the Interrupt Idenfification - register will be set whenever the trigger level is reached - regardless of the setting of RXINT_EN. - -*/ -#define sSetRxTrigger(ChP,LEVEL) \ -do { \ - (ChP)->RxControl[2] &= ~TRIG_MASK; \ - (ChP)->RxControl[2] |= LEVEL; \ - out32((ChP)->IndexAddr,(ChP)->RxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetStop1 -Purpose: Set stop bits to 1 -Call: sSetStop1(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetStop1(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~STOP2; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetStop2 -Purpose: Set stop bits to 2 -Call: sSetStop2(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetStop2(ChP) \ -do { \ - (ChP)->TxControl[2] |= STOP2; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetTxXOFFChar -Purpose: Set the Tx XOFF flow control character -Call: sSetTxXOFFChar(ChP,Ch) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Ch; The value to set the Tx XOFF character to -*/ -#define sSetTxXOFFChar(ChP,CH) \ -do { \ - (ChP)->R[0x07] = (CH); \ - out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ -} while (0) - -/*************************************************************************** -Function: sSetTxXONChar -Purpose: Set the Tx XON flow control character -Call: sSetTxXONChar(ChP,Ch) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Ch; The value to set the Tx XON character to -*/ -#define sSetTxXONChar(ChP,CH) \ -do { \ - (ChP)->R[0x0b] = (CH); \ - out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \ -} while (0) - -/*************************************************************************** -Function: sStartRxProcessor -Purpose: Start a channel's receive processor -Call: sStartRxProcessor(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This function is used to start a Rx processor after it was - stopped with sStopRxProcessor() or sStopSWInFlowCtl(). It - will restart both the Rx processor and software input flow control. - -*/ -#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0]) - -/*************************************************************************** -Function: sWriteTxByte -Purpose: Write a transmit data byte to a channel. - ByteIO_t io: Channel transmit register I/O address. This can - be obtained with sGetTxRxDataIO(). - Byte_t Data; The transmit data byte. -Warnings: This function writes the data byte without checking to see if - sMaxTxSize is exceeded in the Tx FIFO. -*/ -#define sWriteTxByte(IO,DATA) sOutB(IO,DATA) - -/* - * Begin Linux specific definitions for the Rocketport driver - * - * This code is Copyright Theodore Ts'o, 1995-1997 - */ - -struct r_port { - int magic; - struct tty_port port; - int line; - int flags; /* Don't yet match the ASY_ flags!! */ - unsigned int board:3; - unsigned int aiop:2; - unsigned int chan:3; - CONTROLLER_t *ctlp; - CHANNEL_t channel; - int intmask; - int xmit_fifo_room; /* room in xmit fifo */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - int cd_status; - int ignore_status_mask; - int read_status_mask; - int cps; - - spinlock_t slock; - struct mutex write_mtx; -}; - -#define RPORT_MAGIC 0x525001 - -#define NUM_BOARDS 8 -#define MAX_RP_PORTS (32*NUM_BOARDS) - -/* - * The size of the xmit buffer is 1 page, or 4096 bytes - */ -#define XMIT_BUF_SIZE 4096 - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* - * Assigned major numbers for the Comtrol Rocketport - */ -#define TTY_ROCKET_MAJOR 46 -#define CUA_ROCKET_MAJOR 47 - -#ifdef PCI_VENDOR_ID_RP -#undef PCI_VENDOR_ID_RP -#undef PCI_DEVICE_ID_RP8OCTA -#undef PCI_DEVICE_ID_RP8INTF -#undef PCI_DEVICE_ID_RP16INTF -#undef PCI_DEVICE_ID_RP32INTF -#undef PCI_DEVICE_ID_URP8OCTA -#undef PCI_DEVICE_ID_URP8INTF -#undef PCI_DEVICE_ID_URP16INTF -#undef PCI_DEVICE_ID_CRP16INTF -#undef PCI_DEVICE_ID_URP32INTF -#endif - -/* Comtrol PCI Vendor ID */ -#define PCI_VENDOR_ID_RP 0x11fe - -/* Comtrol Device ID's */ -#define PCI_DEVICE_ID_RP32INTF 0x0001 /* Rocketport 32 port w/external I/F */ -#define PCI_DEVICE_ID_RP8INTF 0x0002 /* Rocketport 8 port w/external I/F */ -#define PCI_DEVICE_ID_RP16INTF 0x0003 /* Rocketport 16 port w/external I/F */ -#define PCI_DEVICE_ID_RP4QUAD 0x0004 /* Rocketport 4 port w/quad cable */ -#define PCI_DEVICE_ID_RP8OCTA 0x0005 /* Rocketport 8 port w/octa cable */ -#define PCI_DEVICE_ID_RP8J 0x0006 /* Rocketport 8 port w/RJ11 connectors */ -#define PCI_DEVICE_ID_RP4J 0x0007 /* Rocketport 4 port w/RJ11 connectors */ -#define PCI_DEVICE_ID_RP8SNI 0x0008 /* Rocketport 8 port w/ DB78 SNI (Siemens) connector */ -#define PCI_DEVICE_ID_RP16SNI 0x0009 /* Rocketport 16 port w/ DB78 SNI (Siemens) connector */ -#define PCI_DEVICE_ID_RPP4 0x000A /* Rocketport Plus 4 port */ -#define PCI_DEVICE_ID_RPP8 0x000B /* Rocketport Plus 8 port */ -#define PCI_DEVICE_ID_RP6M 0x000C /* RocketModem 6 port */ -#define PCI_DEVICE_ID_RP4M 0x000D /* RocketModem 4 port */ -#define PCI_DEVICE_ID_RP2_232 0x000E /* Rocketport Plus 2 port RS232 */ -#define PCI_DEVICE_ID_RP2_422 0x000F /* Rocketport Plus 2 port RS422 */ - -/* Universal PCI boards */ -#define PCI_DEVICE_ID_URP32INTF 0x0801 /* Rocketport UPCI 32 port w/external I/F */ -#define PCI_DEVICE_ID_URP8INTF 0x0802 /* Rocketport UPCI 8 port w/external I/F */ -#define PCI_DEVICE_ID_URP16INTF 0x0803 /* Rocketport UPCI 16 port w/external I/F */ -#define PCI_DEVICE_ID_URP8OCTA 0x0805 /* Rocketport UPCI 8 port w/octa cable */ -#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C /* Rocketmodem III 8 port */ -#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D /* Rocketmodem III 4 port */ - -/* Compact PCI device */ -#define PCI_DEVICE_ID_CRP16INTF 0x0903 /* Rocketport Compact PCI 16 port w/external I/F */ - diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index c33e02cbde93..61550f24a2d3 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -28,6 +28,10 @@ #define ASPEED_VUART_ADDRL 0x28 #define ASPEED_VUART_ADDRH 0x2c +#define ASPEED_VUART_DEFAULT_LPC_ADDR 0x3f8 +#define ASPEED_VUART_DEFAULT_SIRQ 4 +#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY IRQ_TYPE_LEVEL_LOW + struct aspeed_vuart { struct device *dev; void __iomem *regs; @@ -72,22 +76,31 @@ static ssize_t lpc_address_show(struct device *dev, return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr); } +static int aspeed_vuart_set_lpc_address(struct aspeed_vuart *vuart, u32 addr) +{ + if (addr > U16_MAX) + return -EINVAL; + + writeb(addr >> 8, vuart->regs + ASPEED_VUART_ADDRH); + writeb(addr >> 0, vuart->regs + ASPEED_VUART_ADDRL); + + return 0; +} + static ssize_t lpc_address_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aspeed_vuart *vuart = dev_get_drvdata(dev); - unsigned long val; + u32 val; int err; - err = kstrtoul(buf, 0, &val); + err = kstrtou32(buf, 0, &val); if (err) return err; - writeb(val >> 8, vuart->regs + ASPEED_VUART_ADDRH); - writeb(val >> 0, vuart->regs + ASPEED_VUART_ADDRL); - - return count; + err = aspeed_vuart_set_lpc_address(vuart, val); + return err ? : count; } static DEVICE_ATTR_RW(lpc_address); @@ -105,27 +118,37 @@ static ssize_t sirq_show(struct device *dev, return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg); } +static int aspeed_vuart_set_sirq(struct aspeed_vuart *vuart, u32 sirq) +{ + u8 reg; + + if (sirq > (ASPEED_VUART_GCRB_HOST_SIRQ_MASK >> ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT)) + return -EINVAL; + + sirq <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; + sirq &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + + reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + reg |= sirq; + writeb(reg, vuart->regs + ASPEED_VUART_GCRB); + + return 0; +} + static ssize_t sirq_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aspeed_vuart *vuart = dev_get_drvdata(dev); unsigned long val; int err; - u8 reg; err = kstrtoul(buf, 0, &val); if (err) return err; - val <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; - val &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; - - reg = readb(vuart->regs + ASPEED_VUART_GCRB); - reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK; - reg |= val; - writeb(reg, vuart->regs + ASPEED_VUART_GCRB); - - return count; + err = aspeed_vuart_set_sirq(vuart, val); + return err ? : count; } static DEVICE_ATTR_RW(sirq); @@ -297,7 +320,6 @@ static int aspeed_vuart_handle_irq(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); unsigned int iir, lsr; - unsigned long flags; int space, count; iir = serial_port_in(port, UART_IIR); @@ -305,7 +327,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port) if (iir & UART_IIR_NO_INT) return 0; - spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->lock); lsr = serial_port_in(port, UART_LSR); @@ -341,7 +363,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port) if (lsr & UART_LSR_THRE) serial8250_tx_chars(up); - uart_unlock_and_check_sysrq(port, flags); + uart_unlock_and_check_sysrq(port); return 1; } @@ -367,6 +389,18 @@ static void aspeed_vuart_auto_configure_sirq_polarity( aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0); } +static int aspeed_vuart_map_irq_polarity(u32 dt) +{ + switch (dt) { + case IRQ_TYPE_LEVEL_LOW: + return 0; + case IRQ_TYPE_LEVEL_HIGH: + return 1; + default: + return -EINVAL; + } +} + static int aspeed_vuart_probe(struct platform_device *pdev) { struct of_phandle_args sirq_polarity_sense_args; @@ -374,8 +408,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev) struct aspeed_vuart *vuart; struct device_node *np; struct resource *res; - u32 clk, prop; - int rc; + u32 clk, prop, sirq[2]; + int rc, sirq_polarity; np = pdev->dev.of_node; @@ -482,6 +516,37 @@ static int aspeed_vuart_probe(struct platform_device *pdev) of_node_put(sirq_polarity_sense_args.np); } + rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop); + if (rc < 0) + prop = ASPEED_VUART_DEFAULT_LPC_ADDR; + + rc = aspeed_vuart_set_lpc_address(vuart, prop); + if (rc < 0) { + dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg property\n"); + goto err_clk_disable; + } + + rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2); + if (rc < 0) { + sirq[0] = ASPEED_VUART_DEFAULT_SIRQ; + sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY; + } + + rc = aspeed_vuart_set_sirq(vuart, sirq[0]); + if (rc < 0) { + dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts property\n"); + goto err_clk_disable; + } + + sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]); + if (sirq_polarity < 0) { + dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n"); + rc = sirq_polarity; + goto err_clk_disable; + } + + aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity); + aspeed_vuart_set_enabled(vuart, true); aspeed_vuart_set_host_tx_discard(vuart, true); platform_set_drvdata(pdev, vuart); diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c new file mode 100644 index 000000000000..725a450058f8 --- /dev/null +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -0,0 +1,1202 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2020, Broadcom */ +/* + * 8250-core based driver for Broadcom ns16550a UARTs + * + * This driver uses the standard 8250 driver core but adds additional + * optional features including the ability to use a baud rate clock + * mux for more accurate high speed baud rate selection and also + * an optional DMA engine. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +/* Register definitions for UART DMA block. Version 1.1 or later. */ +#define UDMA_ARB_RX 0x00 +#define UDMA_ARB_TX 0x04 +#define UDMA_ARB_REQ 0x00000001 +#define UDMA_ARB_GRANT 0x00000002 + +#define UDMA_RX_REVISION 0x00 +#define UDMA_RX_REVISION_REQUIRED 0x00000101 +#define UDMA_RX_CTRL 0x04 +#define UDMA_RX_CTRL_BUF_CLOSE_MODE 0x00010000 +#define UDMA_RX_CTRL_MASK_WR_DONE 0x00008000 +#define UDMA_RX_CTRL_ENDIAN_OVERRIDE 0x00004000 +#define UDMA_RX_CTRL_ENDIAN 0x00002000 +#define UDMA_RX_CTRL_OE_IS_ERR 0x00001000 +#define UDMA_RX_CTRL_PE_IS_ERR 0x00000800 +#define UDMA_RX_CTRL_FE_IS_ERR 0x00000400 +#define UDMA_RX_CTRL_NUM_BUF_USED_MASK 0x000003c0 +#define UDMA_RX_CTRL_NUM_BUF_USED_SHIFT 6 +#define UDMA_RX_CTRL_BUF_CLOSE_CLK_SEL_SYS 0x00000020 +#define UDMA_RX_CTRL_BUF_CLOSE_ENA 0x00000010 +#define UDMA_RX_CTRL_TIMEOUT_CLK_SEL_SYS 0x00000008 +#define UDMA_RX_CTRL_TIMEOUT_ENA 0x00000004 +#define UDMA_RX_CTRL_ABORT 0x00000002 +#define UDMA_RX_CTRL_ENA 0x00000001 +#define UDMA_RX_STATUS 0x08 +#define UDMA_RX_STATUS_ACTIVE_BUF_MASK 0x0000000f +#define UDMA_RX_TRANSFER_LEN 0x0c +#define UDMA_RX_TRANSFER_TOTAL 0x10 +#define UDMA_RX_BUFFER_SIZE 0x14 +#define UDMA_RX_SRC_ADDR 0x18 +#define UDMA_RX_TIMEOUT 0x1c +#define UDMA_RX_BUFFER_CLOSE 0x20 +#define UDMA_RX_BLOCKOUT_COUNTER 0x24 +#define UDMA_RX_BUF0_PTR_LO 0x28 +#define UDMA_RX_BUF0_PTR_HI 0x2c +#define UDMA_RX_BUF0_STATUS 0x30 +#define UDMA_RX_BUFX_STATUS_OVERRUN_ERR 0x00000010 +#define UDMA_RX_BUFX_STATUS_FRAME_ERR 0x00000008 +#define UDMA_RX_BUFX_STATUS_PARITY_ERR 0x00000004 +#define UDMA_RX_BUFX_STATUS_CLOSE_EXPIRED 0x00000002 +#define UDMA_RX_BUFX_STATUS_DATA_RDY 0x00000001 +#define UDMA_RX_BUF0_DATA_LEN 0x34 +#define UDMA_RX_BUF1_PTR_LO 0x38 +#define UDMA_RX_BUF1_PTR_HI 0x3c +#define UDMA_RX_BUF1_STATUS 0x40 +#define UDMA_RX_BUF1_DATA_LEN 0x44 + +#define UDMA_TX_REVISION 0x00 +#define UDMA_TX_REVISION_REQUIRED 0x00000101 +#define UDMA_TX_CTRL 0x04 +#define UDMA_TX_CTRL_ENDIAN_OVERRIDE 0x00000080 +#define UDMA_TX_CTRL_ENDIAN 0x00000040 +#define UDMA_TX_CTRL_NUM_BUF_USED_MASK 0x00000030 +#define UDMA_TX_CTRL_NUM_BUF_USED_1 0x00000010 +#define UDMA_TX_CTRL_ABORT 0x00000002 +#define UDMA_TX_CTRL_ENA 0x00000001 +#define UDMA_TX_DST_ADDR 0x08 +#define UDMA_TX_BLOCKOUT_COUNTER 0x10 +#define UDMA_TX_TRANSFER_LEN 0x14 +#define UDMA_TX_TRANSFER_TOTAL 0x18 +#define UDMA_TX_STATUS 0x20 +#define UDMA_TX_BUF0_PTR_LO 0x24 +#define UDMA_TX_BUF0_PTR_HI 0x28 +#define UDMA_TX_BUF0_STATUS 0x2c +#define UDMA_TX_BUFX_LAST 0x00000002 +#define UDMA_TX_BUFX_EMPTY 0x00000001 +#define UDMA_TX_BUF0_DATA_LEN 0x30 +#define UDMA_TX_BUF0_DATA_SENT 0x34 +#define UDMA_TX_BUF1_PTR_LO 0x38 + +#define UDMA_INTR_STATUS 0x00 +#define UDMA_INTR_ARB_TX_GRANT 0x00040000 +#define UDMA_INTR_ARB_RX_GRANT 0x00020000 +#define UDMA_INTR_TX_ALL_EMPTY 0x00010000 +#define UDMA_INTR_TX_EMPTY_BUF1 0x00008000 +#define UDMA_INTR_TX_EMPTY_BUF0 0x00004000 +#define UDMA_INTR_TX_ABORT 0x00002000 +#define UDMA_INTR_TX_DONE 0x00001000 +#define UDMA_INTR_RX_ERROR 0x00000800 +#define UDMA_INTR_RX_TIMEOUT 0x00000400 +#define UDMA_INTR_RX_READY_BUF7 0x00000200 +#define UDMA_INTR_RX_READY_BUF6 0x00000100 +#define UDMA_INTR_RX_READY_BUF5 0x00000080 +#define UDMA_INTR_RX_READY_BUF4 0x00000040 +#define UDMA_INTR_RX_READY_BUF3 0x00000020 +#define UDMA_INTR_RX_READY_BUF2 0x00000010 +#define UDMA_INTR_RX_READY_BUF1 0x00000008 +#define UDMA_INTR_RX_READY_BUF0 0x00000004 +#define UDMA_INTR_RX_READY_MASK 0x000003fc +#define UDMA_INTR_RX_READY_SHIFT 2 +#define UDMA_INTR_RX_ABORT 0x00000002 +#define UDMA_INTR_RX_DONE 0x00000001 +#define UDMA_INTR_SET 0x04 +#define UDMA_INTR_CLEAR 0x08 +#define UDMA_INTR_MASK_STATUS 0x0c +#define UDMA_INTR_MASK_SET 0x10 +#define UDMA_INTR_MASK_CLEAR 0x14 + + +#define UDMA_RX_INTERRUPTS ( \ + UDMA_INTR_RX_ERROR | \ + UDMA_INTR_RX_TIMEOUT | \ + UDMA_INTR_RX_READY_BUF0 | \ + UDMA_INTR_RX_READY_BUF1 | \ + UDMA_INTR_RX_READY_BUF2 | \ + UDMA_INTR_RX_READY_BUF3 | \ + UDMA_INTR_RX_READY_BUF4 | \ + UDMA_INTR_RX_READY_BUF5 | \ + UDMA_INTR_RX_READY_BUF6 | \ + UDMA_INTR_RX_READY_BUF7 | \ + UDMA_INTR_RX_ABORT | \ + UDMA_INTR_RX_DONE) + +#define UDMA_RX_ERR_INTERRUPTS ( \ + UDMA_INTR_RX_ERROR | \ + UDMA_INTR_RX_TIMEOUT | \ + UDMA_INTR_RX_ABORT | \ + UDMA_INTR_RX_DONE) + +#define UDMA_TX_INTERRUPTS ( \ + UDMA_INTR_TX_ABORT | \ + UDMA_INTR_TX_DONE) + +#define UDMA_IS_RX_INTERRUPT(status) ((status) & UDMA_RX_INTERRUPTS) +#define UDMA_IS_TX_INTERRUPT(status) ((status) & UDMA_TX_INTERRUPTS) + + +/* Current devices have 8 sets of RX buffer registers */ +#define UDMA_RX_BUFS_COUNT 8 +#define UDMA_RX_BUFS_REG_OFFSET (UDMA_RX_BUF1_PTR_LO - UDMA_RX_BUF0_PTR_LO) +#define UDMA_RX_BUFx_PTR_LO(x) (UDMA_RX_BUF0_PTR_LO + \ + ((x) * UDMA_RX_BUFS_REG_OFFSET)) +#define UDMA_RX_BUFx_PTR_HI(x) (UDMA_RX_BUF0_PTR_HI + \ + ((x) * UDMA_RX_BUFS_REG_OFFSET)) +#define UDMA_RX_BUFx_STATUS(x) (UDMA_RX_BUF0_STATUS + \ + ((x) * UDMA_RX_BUFS_REG_OFFSET)) +#define UDMA_RX_BUFx_DATA_LEN(x) (UDMA_RX_BUF0_DATA_LEN + \ + ((x) * UDMA_RX_BUFS_REG_OFFSET)) + +/* Current devices have 2 sets of TX buffer registers */ +#define UDMA_TX_BUFS_COUNT 2 +#define UDMA_TX_BUFS_REG_OFFSET (UDMA_TX_BUF1_PTR_LO - UDMA_TX_BUF0_PTR_LO) +#define UDMA_TX_BUFx_PTR_LO(x) (UDMA_TX_BUF0_PTR_LO + \ + ((x) * UDMA_TX_BUFS_REG_OFFSET)) +#define UDMA_TX_BUFx_PTR_HI(x) (UDMA_TX_BUF0_PTR_HI + \ + ((x) * UDMA_TX_BUFS_REG_OFFSET)) +#define UDMA_TX_BUFx_STATUS(x) (UDMA_TX_BUF0_STATUS + \ + ((x) * UDMA_TX_BUFS_REG_OFFSET)) +#define UDMA_TX_BUFx_DATA_LEN(x) (UDMA_TX_BUF0_DATA_LEN + \ + ((x) * UDMA_TX_BUFS_REG_OFFSET)) +#define UDMA_TX_BUFx_DATA_SENT(x) (UDMA_TX_BUF0_DATA_SENT + \ + ((x) * UDMA_TX_BUFS_REG_OFFSET)) +#define REGS_8250 0 +#define REGS_DMA_RX 1 +#define REGS_DMA_TX 2 +#define REGS_DMA_ISR 3 +#define REGS_DMA_ARB 4 +#define REGS_MAX 5 + +#define TX_BUF_SIZE 4096 +#define RX_BUF_SIZE 4096 +#define RX_BUFS_COUNT 2 +#define KHZ 1000 +#define MHZ(x) ((x) * KHZ * KHZ) + +static const u32 brcmstb_rate_table[] = { + MHZ(81), + MHZ(108), + MHZ(64), /* Actually 64285715 for some chips */ + MHZ(48), +}; + +static const u32 brcmstb_rate_table_7278[] = { + MHZ(81), + MHZ(108), + 0, + MHZ(48), +}; + +struct brcmuart_priv { + int line; + struct clk *baud_mux_clk; + unsigned long default_mux_rate; + u32 real_rates[ARRAY_SIZE(brcmstb_rate_table)]; + const u32 *rate_table; + ktime_t char_wait; + struct uart_port *up; + struct hrtimer hrt; + bool shutdown; + bool dma_enabled; + struct uart_8250_dma dma; + void __iomem *regs[REGS_MAX]; + dma_addr_t rx_addr; + void *rx_bufs; + size_t rx_size; + int rx_next_buf; + dma_addr_t tx_addr; + void *tx_buf; + size_t tx_size; + bool tx_running; + bool rx_running; + struct dentry *debugfs_dir; + + /* stats exposed through debugfs */ + u64 dma_rx_partial_buf; + u64 dma_rx_full_buf; + u32 rx_bad_timeout_late_char; + u32 rx_bad_timeout_no_char; + u32 rx_missing_close_timeout; + u32 rx_err; + u32 rx_timeout; + u32 rx_abort; +}; + +static struct dentry *brcmuart_debugfs_root; + +/* + * Register access routines + */ +static u32 udma_readl(struct brcmuart_priv *priv, + int reg_type, int offset) +{ + return readl(priv->regs[reg_type] + offset); +} + +static void udma_writel(struct brcmuart_priv *priv, + int reg_type, int offset, u32 value) +{ + writel(value, priv->regs[reg_type] + offset); +} + +static void udma_set(struct brcmuart_priv *priv, + int reg_type, int offset, u32 bits) +{ + void __iomem *reg = priv->regs[reg_type] + offset; + u32 value; + + value = readl(reg); + value |= bits; + writel(value, reg); +} + +static void udma_unset(struct brcmuart_priv *priv, + int reg_type, int offset, u32 bits) +{ + void __iomem *reg = priv->regs[reg_type] + offset; + u32 value; + + value = readl(reg); + value &= ~bits; + writel(value, reg); +} + +/* + * The UART DMA engine hardware can be used by multiple UARTS, but + * only one at a time. Sharing is not currently supported so + * the first UART to request the DMA engine will get it and any + * subsequent requests by other UARTS will fail. + */ +static int brcmuart_arbitration(struct brcmuart_priv *priv, bool acquire) +{ + u32 rx_grant; + u32 tx_grant; + int waits; + int ret = 0; + + if (acquire) { + udma_set(priv, REGS_DMA_ARB, UDMA_ARB_RX, UDMA_ARB_REQ); + udma_set(priv, REGS_DMA_ARB, UDMA_ARB_TX, UDMA_ARB_REQ); + + waits = 1; + while (1) { + rx_grant = udma_readl(priv, REGS_DMA_ARB, UDMA_ARB_RX); + tx_grant = udma_readl(priv, REGS_DMA_ARB, UDMA_ARB_TX); + if (rx_grant & tx_grant & UDMA_ARB_GRANT) + return 0; + if (waits-- == 0) + break; + msleep(1); + } + ret = 1; + } + + udma_unset(priv, REGS_DMA_ARB, UDMA_ARB_RX, UDMA_ARB_REQ); + udma_unset(priv, REGS_DMA_ARB, UDMA_ARB_TX, UDMA_ARB_REQ); + return ret; +} + +static void brcmuart_init_dma_hardware(struct brcmuart_priv *priv) +{ + u32 daddr; + u32 value; + int x; + + /* Start with all interrupts disabled */ + udma_writel(priv, REGS_DMA_ISR, UDMA_INTR_MASK_SET, 0xffffffff); + + udma_writel(priv, REGS_DMA_RX, UDMA_RX_BUFFER_SIZE, RX_BUF_SIZE); + + /* + * Setup buffer close to happen when 32 character times have + * elapsed since the last character was received. + */ + udma_writel(priv, REGS_DMA_RX, UDMA_RX_BUFFER_CLOSE, 16*10*32); + value = (RX_BUFS_COUNT << UDMA_RX_CTRL_NUM_BUF_USED_SHIFT) + | UDMA_RX_CTRL_BUF_CLOSE_MODE + | UDMA_RX_CTRL_BUF_CLOSE_ENA; + udma_writel(priv, REGS_DMA_RX, UDMA_RX_CTRL, value); + + udma_writel(priv, REGS_DMA_RX, UDMA_RX_BLOCKOUT_COUNTER, 0); + daddr = priv->rx_addr; + for (x = 0; x < RX_BUFS_COUNT; x++) { + + /* Set RX transfer length to 0 for unknown */ + udma_writel(priv, REGS_DMA_RX, UDMA_RX_TRANSFER_LEN, 0); + + udma_writel(priv, REGS_DMA_RX, UDMA_RX_BUFx_PTR_LO(x), + lower_32_bits(daddr)); + udma_writel(priv, REGS_DMA_RX, UDMA_RX_BUFx_PTR_HI(x), + upper_32_bits(daddr)); + daddr += RX_BUF_SIZE; + } + + daddr = priv->tx_addr; + udma_writel(priv, REGS_DMA_TX, UDMA_TX_BUFx_PTR_LO(0), + lower_32_bits(daddr)); + udma_writel(priv, REGS_DMA_TX, UDMA_TX_BUFx_PTR_HI(0), + upper_32_bits(daddr)); + udma_writel(priv, REGS_DMA_TX, UDMA_TX_CTRL, + UDMA_TX_CTRL_NUM_BUF_USED_1); + + /* clear all interrupts then enable them */ + udma_writel(priv, REGS_DMA_ISR, UDMA_INTR_CLEAR, 0xffffffff); + udma_writel(priv, REGS_DMA_ISR, UDMA_INTR_MASK_CLEAR, + UDMA_RX_INTERRUPTS | UDMA_TX_INTERRUPTS); + +} + +static void start_rx_dma(struct uart_8250_port *p) +{ + struct brcmuart_priv *priv = p->port.private_data; + int x; + + udma_unset(priv, REGS_DMA_RX, UDMA_RX_CTRL, UDMA_RX_CTRL_ENA); + + /* Clear the RX ready bit for all buffers */ + for (x = 0; x < RX_BUFS_COUNT; x++) + udma_unset(priv, REGS_DMA_RX, UDMA_RX_BUFx_STATUS(x), + UDMA_RX_BUFX_STATUS_DATA_RDY); + + /* always start with buffer 0 */ + udma_unset(priv, REGS_DMA_RX, UDMA_RX_STATUS, + UDMA_RX_STATUS_ACTIVE_BUF_MASK); + priv->rx_next_buf = 0; + + udma_set(priv, REGS_DMA_RX, UDMA_RX_CTRL, UDMA_RX_CTRL_ENA); + priv->rx_running = true; +} + +static void stop_rx_dma(struct uart_8250_port *p) +{ + struct brcmuart_priv *priv = p->port.private_data; + + /* If RX is running, set the RX ABORT */ + if (priv->rx_running) + udma_set(priv, REGS_DMA_RX, UDMA_RX_CTRL, UDMA_RX_CTRL_ABORT); +} + +static int stop_tx_dma(struct uart_8250_port *p) +{ + struct brcmuart_priv *priv = p->port.private_data; + u32 value; + + /* If TX is running, set the TX ABORT */ + value = udma_readl(priv, REGS_DMA_TX, UDMA_TX_CTRL); + if (value & UDMA_TX_CTRL_ENA) + udma_set(priv, REGS_DMA_TX, UDMA_TX_CTRL, UDMA_TX_CTRL_ABORT); + priv->tx_running = false; + return 0; +} + +/* + * NOTE: printk's in this routine will hang the system if this is + * the console tty + */ +static int brcmuart_tx_dma(struct uart_8250_port *p) +{ + struct brcmuart_priv *priv = p->port.private_data; + struct circ_buf *xmit = &p->port.state->xmit; + u32 tx_size; + + if (uart_tx_stopped(&p->port) || priv->tx_running || + uart_circ_empty(xmit)) { + return 0; + } + tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + priv->dma.tx_err = 0; + memcpy(priv->tx_buf, &xmit->buf[xmit->tail], tx_size); + xmit->tail += tx_size; + xmit->tail &= UART_XMIT_SIZE - 1; + p->port.icount.tx += tx_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&p->port); + + udma_writel(priv, REGS_DMA_TX, UDMA_TX_TRANSFER_LEN, tx_size); + udma_writel(priv, REGS_DMA_TX, UDMA_TX_BUF0_DATA_LEN, tx_size); + udma_unset(priv, REGS_DMA_TX, UDMA_TX_BUF0_STATUS, UDMA_TX_BUFX_EMPTY); + udma_set(priv, REGS_DMA_TX, UDMA_TX_CTRL, UDMA_TX_CTRL_ENA); + priv->tx_running = true; + + return 0; +} + +static void brcmuart_rx_buf_done_isr(struct uart_port *up, int index) +{ + struct brcmuart_priv *priv = up->private_data; + struct tty_port *tty_port = &up->state->port; + u32 status; + u32 length; + u32 copied; + + /* Make sure we're still in sync with the hardware */ + status = udma_readl(priv, REGS_DMA_RX, UDMA_RX_BUFx_STATUS(index)); + length = udma_readl(priv, REGS_DMA_RX, UDMA_RX_BUFx_DATA_LEN(index)); + + if ((status & UDMA_RX_BUFX_STATUS_DATA_RDY) == 0) { + dev_err(up->dev, "RX done interrupt but DATA_RDY not found\n"); + return; + } + if (status & (UDMA_RX_BUFX_STATUS_OVERRUN_ERR | + UDMA_RX_BUFX_STATUS_FRAME_ERR | + UDMA_RX_BUFX_STATUS_PARITY_ERR)) { + if (status & UDMA_RX_BUFX_STATUS_OVERRUN_ERR) { + up->icount.overrun++; + dev_warn(up->dev, "RX OVERRUN Error\n"); + } + if (status & UDMA_RX_BUFX_STATUS_FRAME_ERR) { + up->icount.frame++; + dev_warn(up->dev, "RX FRAMING Error\n"); + } + if (status & UDMA_RX_BUFX_STATUS_PARITY_ERR) { + up->icount.parity++; + dev_warn(up->dev, "RX PARITY Error\n"); + } + } + copied = (u32)tty_insert_flip_string( + tty_port, + priv->rx_bufs + (index * RX_BUF_SIZE), + length); + if (copied != length) { + dev_warn(up->dev, "Flip buffer overrun of %d bytes\n", + length - copied); + up->icount.overrun += length - copied; + } + up->icount.rx += length; + if (status & UDMA_RX_BUFX_STATUS_CLOSE_EXPIRED) + priv->dma_rx_partial_buf++; + else if (length != RX_BUF_SIZE) + /* + * This is a bug in the controller that doesn't cause + * any problems but will be fixed in the future. + */ + priv->rx_missing_close_timeout++; + else + priv->dma_rx_full_buf++; + + tty_flip_buffer_push(tty_port); +} + +static void brcmuart_rx_isr(struct uart_port *up, u32 rx_isr) +{ + struct brcmuart_priv *priv = up->private_data; + struct device *dev = up->dev; + u32 rx_done_isr; + u32 check_isr; + + rx_done_isr = (rx_isr & UDMA_INTR_RX_READY_MASK); + while (rx_done_isr) { + check_isr = UDMA_INTR_RX_READY_BUF0 << priv->rx_next_buf; + if (check_isr & rx_done_isr) { + brcmuart_rx_buf_done_isr(up, priv->rx_next_buf); + } else { + dev_err(dev, + "RX buffer ready out of sequence, restarting RX DMA\n"); + start_rx_dma(up_to_u8250p(up)); + break; + } + if (rx_isr & UDMA_RX_ERR_INTERRUPTS) { + if (rx_isr & UDMA_INTR_RX_ERROR) + priv->rx_err++; + if (rx_isr & UDMA_INTR_RX_TIMEOUT) { + priv->rx_timeout++; + dev_err(dev, "RX TIMEOUT Error\n"); + } + if (rx_isr & UDMA_INTR_RX_ABORT) + priv->rx_abort++; + priv->rx_running = false; + } + /* If not ABORT, re-enable RX buffer */ + if (!(rx_isr & UDMA_INTR_RX_ABORT)) + udma_unset(priv, REGS_DMA_RX, + UDMA_RX_BUFx_STATUS(priv->rx_next_buf), + UDMA_RX_BUFX_STATUS_DATA_RDY); + rx_done_isr &= ~check_isr; + priv->rx_next_buf++; + if (priv->rx_next_buf == RX_BUFS_COUNT) + priv->rx_next_buf = 0; + } +} + +static void brcmuart_tx_isr(struct uart_port *up, u32 isr) +{ + struct brcmuart_priv *priv = up->private_data; + struct device *dev = up->dev; + struct uart_8250_port *port_8250 = up_to_u8250p(up); + struct circ_buf *xmit = &port_8250->port.state->xmit; + + if (isr & UDMA_INTR_TX_ABORT) { + if (priv->tx_running) + dev_err(dev, "Unexpected TX_ABORT interrupt\n"); + return; + } + priv->tx_running = false; + if (!uart_circ_empty(xmit) && !uart_tx_stopped(up)) + brcmuart_tx_dma(port_8250); +} + +static irqreturn_t brcmuart_isr(int irq, void *dev_id) +{ + struct uart_port *up = dev_id; + struct device *dev = up->dev; + struct brcmuart_priv *priv = up->private_data; + unsigned long flags; + u32 interrupts; + u32 rval; + u32 tval; + + interrupts = udma_readl(priv, REGS_DMA_ISR, UDMA_INTR_STATUS); + if (interrupts == 0) + return IRQ_NONE; + + spin_lock_irqsave(&up->lock, flags); + + /* Clear all interrupts */ + udma_writel(priv, REGS_DMA_ISR, UDMA_INTR_CLEAR, interrupts); + + rval = UDMA_IS_RX_INTERRUPT(interrupts); + if (rval) + brcmuart_rx_isr(up, rval); + tval = UDMA_IS_TX_INTERRUPT(interrupts); + if (tval) + brcmuart_tx_isr(up, tval); + if ((rval | tval) == 0) + dev_warn(dev, "Spurious interrupt: 0x%x\n", interrupts); + + spin_unlock_irqrestore(&up->lock, flags); + return IRQ_HANDLED; +} + +static int brcmuart_startup(struct uart_port *port) +{ + int res; + struct uart_8250_port *up = up_to_u8250p(port); + struct brcmuart_priv *priv = up->port.private_data; + + priv->shutdown = false; + + /* + * prevent serial8250_do_startup() from allocating non-existent + * DMA resources + */ + up->dma = NULL; + + res = serial8250_do_startup(port); + if (!priv->dma_enabled) + return res; + /* + * Disable the Receive Data Interrupt because the DMA engine + * will handle this. + */ + up->ier &= ~UART_IER_RDI; + serial_port_out(port, UART_IER, up->ier); + + priv->tx_running = false; + priv->dma.rx_dma = NULL; + priv->dma.tx_dma = brcmuart_tx_dma; + up->dma = &priv->dma; + + brcmuart_init_dma_hardware(priv); + start_rx_dma(up); + return res; +} + +static void brcmuart_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct brcmuart_priv *priv = up->port.private_data; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + priv->shutdown = true; + if (priv->dma_enabled) { + stop_rx_dma(up); + stop_tx_dma(up); + /* disable all interrupts */ + udma_writel(priv, REGS_DMA_ISR, UDMA_INTR_MASK_SET, + UDMA_RX_INTERRUPTS | UDMA_TX_INTERRUPTS); + } + + /* + * prevent serial8250_do_shutdown() from trying to free + * DMA resources that we never alloc'd for this driver. + */ + up->dma = NULL; + + spin_unlock_irqrestore(&port->lock, flags); + serial8250_do_shutdown(port); +} + +/* + * Not all clocks run at the exact specified rate, so set each requested + * rate and then get the actual rate. + */ +static void init_real_clk_rates(struct device *dev, struct brcmuart_priv *priv) +{ + int x; + int rc; + + priv->default_mux_rate = clk_get_rate(priv->baud_mux_clk); + for (x = 0; x < ARRAY_SIZE(priv->real_rates); x++) { + if (priv->rate_table[x] == 0) { + priv->real_rates[x] = 0; + continue; + } + rc = clk_set_rate(priv->baud_mux_clk, priv->rate_table[x]); + if (rc) { + dev_err(dev, "Error selecting BAUD MUX clock for %u\n", + priv->rate_table[x]); + priv->real_rates[x] = priv->rate_table[x]; + } else { + priv->real_rates[x] = clk_get_rate(priv->baud_mux_clk); + } + } + clk_set_rate(priv->baud_mux_clk, priv->default_mux_rate); +} + +static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, + u32 baud) +{ + u32 percent; + u32 best_percent = UINT_MAX; + u32 quot; + u32 best_quot = 1; + u32 rate; + int best_index = -1; + u64 hires_rate; + u64 hires_baud; + u64 hires_err; + int rc; + int i; + int real_baud; + + /* If the Baud Mux Clock was not specified, just return */ + if (priv->baud_mux_clk == NULL) + return; + + /* Find the closest match for specified baud */ + for (i = 0; i < ARRAY_SIZE(priv->real_rates); i++) { + if (priv->real_rates[i] == 0) + continue; + rate = priv->real_rates[i] / 16; + quot = DIV_ROUND_CLOSEST(rate, baud); + if (!quot) + continue; + + /* increase resolution to get xx.xx percent */ + hires_rate = (u64)rate * 10000; + hires_baud = (u64)baud * 10000; + + hires_err = div_u64(hires_rate, (u64)quot); + + /* get the delta */ + if (hires_err > hires_baud) + hires_err = (hires_err - hires_baud); + else + hires_err = (hires_baud - hires_err); + + percent = (unsigned long)DIV_ROUND_CLOSEST_ULL(hires_err, baud); + dev_dbg(up->dev, + "Baud rate: %u, MUX Clk: %u, Error: %u.%u%%\n", + baud, priv->real_rates[i], percent / 100, + percent % 100); + if (percent < best_percent) { + best_percent = percent; + best_index = i; + best_quot = quot; + } + } + if (best_index == -1) { + dev_err(up->dev, "Error, %d BAUD rate is too fast.\n", baud); + return; + } + rate = priv->real_rates[best_index]; + rc = clk_set_rate(priv->baud_mux_clk, rate); + if (rc) + dev_err(up->dev, "Error selecting BAUD MUX clock\n"); + + /* Error over 3 percent will cause data errors */ + if (best_percent > 300) + dev_err(up->dev, "Error, baud: %d has %u.%u%% error\n", + baud, percent / 100, percent % 100); + + real_baud = rate / 16 / best_quot; + dev_dbg(up->dev, "Selecting BAUD MUX rate: %u\n", rate); + dev_dbg(up->dev, "Requested baud: %u, Actual baud: %u\n", + baud, real_baud); + + /* calc nanoseconds for 1.5 characters time at the given baud rate */ + i = NSEC_PER_SEC / real_baud / 10; + i += (i / 2); + priv->char_wait = ns_to_ktime(i); + + up->uartclk = rate; +} + +static void brcmstb_set_termios(struct uart_port *up, + struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *p8250 = up_to_u8250p(up); + struct brcmuart_priv *priv = up->private_data; + + if (priv->dma_enabled) + stop_rx_dma(p8250); + set_clock_mux(up, priv, tty_termios_baud_rate(termios)); + serial8250_do_set_termios(up, termios, old); + if (p8250->mcr & UART_MCR_AFE) + p8250->port.status |= UPSTAT_AUTOCTS; + if (priv->dma_enabled) + start_rx_dma(p8250); +} + +static int brcmuart_handle_irq(struct uart_port *p) +{ + unsigned int iir = serial_port_in(p, UART_IIR); + struct brcmuart_priv *priv = p->private_data; + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int status; + unsigned long flags; + unsigned int ier; + unsigned int mcr; + int handled = 0; + + /* + * There's a bug in some 8250 cores where we get a timeout + * interrupt but there is no data ready. + */ + if (((iir & UART_IIR_ID) == UART_IIR_RX_TIMEOUT) && !(priv->shutdown)) { + spin_lock_irqsave(&p->lock, flags); + status = serial_port_in(p, UART_LSR); + if ((status & UART_LSR_DR) == 0) { + + ier = serial_port_in(p, UART_IER); + /* + * if Receive Data Interrupt is enabled and + * we're uing hardware flow control, deassert + * RTS and wait for any chars in the pipline to + * arrive and then check for DR again. + */ + if ((ier & UART_IER_RDI) && (up->mcr & UART_MCR_AFE)) { + ier &= ~(UART_IER_RLSI | UART_IER_RDI); + serial_port_out(p, UART_IER, ier); + mcr = serial_port_in(p, UART_MCR); + mcr &= ~UART_MCR_RTS; + serial_port_out(p, UART_MCR, mcr); + hrtimer_start(&priv->hrt, priv->char_wait, + HRTIMER_MODE_REL); + } else { + serial_port_in(p, UART_RX); + } + + handled = 1; + } + spin_unlock_irqrestore(&p->lock, flags); + if (handled) + return 1; + } + return serial8250_handle_irq(p, iir); +} + +static enum hrtimer_restart brcmuart_hrtimer_func(struct hrtimer *t) +{ + struct brcmuart_priv *priv = container_of(t, struct brcmuart_priv, hrt); + struct uart_port *p = priv->up; + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int status; + unsigned long flags; + + if (priv->shutdown) + return HRTIMER_NORESTART; + + spin_lock_irqsave(&p->lock, flags); + status = serial_port_in(p, UART_LSR); + + /* + * If a character did not arrive after the timeout, clear the false + * receive timeout. + */ + if ((status & UART_LSR_DR) == 0) { + serial_port_in(p, UART_RX); + priv->rx_bad_timeout_no_char++; + } else { + priv->rx_bad_timeout_late_char++; + } + + /* re-enable receive unless upper layer has disabled it */ + if ((up->ier & (UART_IER_RLSI | UART_IER_RDI)) == + (UART_IER_RLSI | UART_IER_RDI)) { + status = serial_port_in(p, UART_IER); + status |= (UART_IER_RLSI | UART_IER_RDI); + serial_port_out(p, UART_IER, status); + status = serial_port_in(p, UART_MCR); + status |= UART_MCR_RTS; + serial_port_out(p, UART_MCR, status); + } + spin_unlock_irqrestore(&p->lock, flags); + return HRTIMER_NORESTART; +} + +static const struct of_device_id brcmuart_dt_ids[] = { + { + .compatible = "brcm,bcm7278-uart", + .data = brcmstb_rate_table_7278, + }, + { + .compatible = "brcm,bcm7271-uart", + .data = brcmstb_rate_table, + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, brcmuart_dt_ids); + +static void brcmuart_free_bufs(struct device *dev, struct brcmuart_priv *priv) +{ + if (priv->rx_bufs) + dma_free_coherent(dev, priv->rx_size, priv->rx_bufs, + priv->rx_addr); + if (priv->tx_buf) + dma_free_coherent(dev, priv->tx_size, priv->tx_buf, + priv->tx_addr); +} + +static void brcmuart_throttle(struct uart_port *port) +{ + struct brcmuart_priv *priv = port->private_data; + + udma_writel(priv, REGS_DMA_ISR, UDMA_INTR_MASK_SET, UDMA_RX_INTERRUPTS); +} + +static void brcmuart_unthrottle(struct uart_port *port) +{ + struct brcmuart_priv *priv = port->private_data; + + udma_writel(priv, REGS_DMA_ISR, UDMA_INTR_MASK_CLEAR, + UDMA_RX_INTERRUPTS); +} + +static int debugfs_stats_show(struct seq_file *s, void *unused) +{ + struct brcmuart_priv *priv = s->private; + + seq_printf(s, "rx_err:\t\t\t\t%u\n", + priv->rx_err); + seq_printf(s, "rx_timeout:\t\t\t%u\n", + priv->rx_timeout); + seq_printf(s, "rx_abort:\t\t\t%u\n", + priv->rx_abort); + seq_printf(s, "rx_bad_timeout_late_char:\t%u\n", + priv->rx_bad_timeout_late_char); + seq_printf(s, "rx_bad_timeout_no_char:\t\t%u\n", + priv->rx_bad_timeout_no_char); + seq_printf(s, "rx_missing_close_timeout:\t%u\n", + priv->rx_missing_close_timeout); + if (priv->dma_enabled) { + seq_printf(s, "dma_rx_partial_buf:\t\t%llu\n", + priv->dma_rx_partial_buf); + seq_printf(s, "dma_rx_full_buf:\t\t%llu\n", + priv->dma_rx_full_buf); + } + return 0; +} +DEFINE_SHOW_ATTRIBUTE(debugfs_stats); + +static void brcmuart_init_debugfs(struct brcmuart_priv *priv, + const char *device) +{ + priv->debugfs_dir = debugfs_create_dir(device, brcmuart_debugfs_root); + debugfs_create_file("stats", 0444, priv->debugfs_dir, priv, + &debugfs_stats_fops); +} + + +static int brcmuart_probe(struct platform_device *pdev) +{ + struct resource *regs; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = NULL; + struct uart_8250_port *new_port; + struct device *dev = &pdev->dev; + struct brcmuart_priv *priv; + struct clk *baud_mux_clk; + struct uart_8250_port up; + struct resource *irq; + void __iomem *membase = 0; + resource_size_t mapbase = 0; + u32 clk_rate = 0; + int ret; + int x; + int dma_irq; + static const char * const reg_names[REGS_MAX] = { + "uart", "dma_rx", "dma_tx", "dma_intr2", "dma_arb" + }; + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(dev, "missing irq\n"); + return -EINVAL; + } + priv = devm_kzalloc(dev, sizeof(struct brcmuart_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + of_id = of_match_node(brcmuart_dt_ids, np); + if (!of_id || !of_id->data) + priv->rate_table = brcmstb_rate_table; + else + priv->rate_table = of_id->data; + + for (x = 0; x < REGS_MAX; x++) { + regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, + reg_names[x]); + if (!regs) + break; + priv->regs[x] = devm_ioremap(dev, regs->start, + resource_size(regs)); + if (!priv->regs[x]) + return -ENOMEM; + if (x == REGS_8250) { + mapbase = regs->start; + membase = priv->regs[x]; + } + } + + /* We should have just the uart base registers or all the registers */ + if (x != 1 && x != REGS_MAX) { + dev_warn(dev, "%s registers not specified\n", reg_names[x]); + return -EINVAL; + } + + /* if the DMA registers were specified, try to enable DMA */ + if (x > REGS_DMA_RX) { + if (brcmuart_arbitration(priv, 1) == 0) { + u32 txrev = 0; + u32 rxrev = 0; + + txrev = udma_readl(priv, REGS_DMA_RX, UDMA_RX_REVISION); + rxrev = udma_readl(priv, REGS_DMA_TX, UDMA_TX_REVISION); + if ((txrev >= UDMA_TX_REVISION_REQUIRED) && + (rxrev >= UDMA_RX_REVISION_REQUIRED)) { + + /* Enable the use of the DMA hardware */ + priv->dma_enabled = true; + } else { + brcmuart_arbitration(priv, 0); + dev_err(dev, + "Unsupported DMA Hardware Revision\n"); + } + } else { + dev_err(dev, + "Timeout arbitrating for UART DMA hardware\n"); + } + } + + of_property_read_u32(np, "clock-frequency", &clk_rate); + + /* See if a Baud clock has been specified */ + baud_mux_clk = of_clk_get_by_name(np, "sw_baud"); + if (IS_ERR(baud_mux_clk)) { + if (PTR_ERR(baud_mux_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_dbg(dev, "BAUD MUX clock not specified\n"); + } else { + dev_dbg(dev, "BAUD MUX clock found\n"); + ret = clk_prepare_enable(baud_mux_clk); + if (ret) + return ret; + priv->baud_mux_clk = baud_mux_clk; + init_real_clk_rates(dev, priv); + clk_rate = priv->default_mux_rate; + } + + if (clk_rate == 0) { + dev_err(dev, "clock-frequency or clk not defined\n"); + return -EINVAL; + } + + dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not "); + + memset(&up, 0, sizeof(up)); + up.port.type = PORT_16550A; + up.port.uartclk = clk_rate; + up.port.dev = dev; + up.port.mapbase = mapbase; + up.port.membase = membase; + up.port.irq = irq->start; + up.port.handle_irq = brcmuart_handle_irq; + up.port.regshift = 2; + up.port.iotype = of_device_is_big_endian(np) ? + UPIO_MEM32BE : UPIO_MEM32; + up.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF + | UPF_FIXED_PORT | UPF_FIXED_TYPE; + up.port.dev = dev; + up.port.private_data = priv; + up.capabilities = UART_CAP_FIFO | UART_CAP_AFE; + up.port.fifosize = 32; + + /* Check for a fixed line number */ + ret = of_alias_get_id(np, "serial"); + if (ret >= 0) + up.port.line = ret; + + /* setup HR timer */ + hrtimer_init(&priv->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + priv->hrt.function = brcmuart_hrtimer_func; + + up.port.shutdown = brcmuart_shutdown; + up.port.startup = brcmuart_startup; + up.port.throttle = brcmuart_throttle; + up.port.unthrottle = brcmuart_unthrottle; + up.port.set_termios = brcmstb_set_termios; + + if (priv->dma_enabled) { + priv->rx_size = RX_BUF_SIZE * RX_BUFS_COUNT; + priv->rx_bufs = dma_alloc_coherent(dev, + priv->rx_size, + &priv->rx_addr, GFP_KERNEL); + if (!priv->rx_bufs) + goto err; + priv->tx_size = UART_XMIT_SIZE; + priv->tx_buf = dma_alloc_coherent(dev, + priv->tx_size, + &priv->tx_addr, GFP_KERNEL); + if (!priv->tx_buf) + goto err; + } + + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err(dev, "unable to register 8250 port\n"); + goto err; + } + priv->line = ret; + new_port = serial8250_get_port(ret); + priv->up = &new_port->port; + if (priv->dma_enabled) { + dma_irq = platform_get_irq_byname(pdev, "dma"); + if (dma_irq < 0) { + dev_err(dev, "no IRQ resource info\n"); + goto err1; + } + ret = devm_request_irq(dev, dma_irq, brcmuart_isr, + IRQF_SHARED, "uart DMA irq", &new_port->port); + if (ret) { + dev_err(dev, "unable to register IRQ handler\n"); + goto err1; + } + } + platform_set_drvdata(pdev, priv); + brcmuart_init_debugfs(priv, dev_name(&pdev->dev)); + return 0; + +err1: + serial8250_unregister_port(priv->line); +err: + brcmuart_free_bufs(dev, priv); + brcmuart_arbitration(priv, 0); + return -ENODEV; +} + +static int brcmuart_remove(struct platform_device *pdev) +{ + struct brcmuart_priv *priv = platform_get_drvdata(pdev); + + debugfs_remove_recursive(priv->debugfs_dir); + hrtimer_cancel(&priv->hrt); + serial8250_unregister_port(priv->line); + brcmuart_free_bufs(&pdev->dev, priv); + brcmuart_arbitration(priv, 0); + return 0; +} + +static int __maybe_unused brcmuart_suspend(struct device *dev) +{ + struct brcmuart_priv *priv = dev_get_drvdata(dev); + + serial8250_suspend_port(priv->line); + clk_disable_unprepare(priv->baud_mux_clk); + + return 0; +} + +static int __maybe_unused brcmuart_resume(struct device *dev) +{ + struct brcmuart_priv *priv = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(priv->baud_mux_clk); + if (ret) + dev_err(dev, "Error enabling BAUD MUX clock\n"); + + /* + * The hardware goes back to it's default after suspend + * so get the "clk" back in sync. + */ + ret = clk_set_rate(priv->baud_mux_clk, priv->default_mux_rate); + if (ret) + dev_err(dev, "Error restoring default BAUD MUX clock\n"); + if (priv->dma_enabled) { + if (brcmuart_arbitration(priv, 1)) { + dev_err(dev, "Timeout arbitrating for DMA hardware on resume\n"); + return(-EBUSY); + } + brcmuart_init_dma_hardware(priv); + start_rx_dma(serial8250_get_port(priv->line)); + } + serial8250_resume_port(priv->line); + return 0; +} + +static const struct dev_pm_ops brcmuart_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(brcmuart_suspend, brcmuart_resume) +}; + +static struct platform_driver brcmuart_platform_driver = { + .driver = { + .name = "bcm7271-uart", + .pm = &brcmuart_dev_pm_ops, + .of_match_table = brcmuart_dt_ids, + }, + .probe = brcmuart_probe, + .remove = brcmuart_remove, +}; + +static int __init brcmuart_init(void) +{ + brcmuart_debugfs_root = debugfs_create_dir( + brcmuart_platform_driver.driver.name, NULL); + return platform_driver_register(&brcmuart_platform_driver); +} +module_init(brcmuart_init); + +static void __exit brcmuart_deinit(void) +{ + platform_driver_unregister(&brcmuart_platform_driver); + debugfs_remove_recursive(brcmuart_debugfs_root); +} +module_exit(brcmuart_deinit); + +MODULE_AUTHOR("Al Cooper"); +MODULE_DESCRIPTION("Broadcom NS16550A compatible serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 2d0e7c7e408d..2f49c580139b 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -354,7 +354,7 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) static void * __xr17v35x_register_gpio(struct pci_dev *pcidev, - const struct property_entry *properties) + const struct software_node *node) { struct platform_device *pdev; @@ -365,7 +365,7 @@ __xr17v35x_register_gpio(struct pci_dev *pcidev, pdev->dev.parent = &pcidev->dev; ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pcidev->dev)); - if (platform_device_add_properties(pdev, properties) < 0 || + if (device_add_software_node(&pdev->dev, node) < 0 || platform_device_add(pdev) < 0) { platform_device_put(pdev); return NULL; @@ -380,12 +380,16 @@ static const struct property_entry exar_gpio_properties[] = { { } }; +static const struct software_node exar_gpio_node = { + .properties = exar_gpio_properties, +}; + static int xr17v35x_register_gpio(struct pci_dev *pcidev, struct uart_8250_port *port) { if (pcidev->vendor == PCI_VENDOR_ID_EXAR) port->port.private_data = - __xr17v35x_register_gpio(pcidev, exar_gpio_properties); + __xr17v35x_register_gpio(pcidev, &exar_gpio_node); return 0; } @@ -457,6 +461,10 @@ static const struct property_entry iot2040_gpio_properties[] = { { } }; +static const struct software_node iot2040_gpio_node = { + .properties = iot2040_gpio_properties, +}; + static int iot2040_register_gpio(struct pci_dev *pcidev, struct uart_8250_port *port) { @@ -468,7 +476,7 @@ static int iot2040_register_gpio(struct pci_dev *pcidev, writeb(IOT2040_UARTS_GPIO_HI_MODE, p + UART_EXAR_MPIOSEL_15_8); port->port.private_data = - __xr17v35x_register_gpio(pcidev, iot2040_gpio_properties); + __xr17v35x_register_gpio(pcidev, &iot2040_gpio_node); return 0; } @@ -547,6 +555,7 @@ static void pci_xr17v35x_exit(struct pci_dev *pcidev) struct uart_8250_port *port = serial8250_get_port(priv->line[0]); struct platform_device *pdev = port->port.private_data; + device_remove_software_node(&pdev->dev); platform_device_unregister(pdev); port->port.private_data = NULL; } diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index fbcc90c31ca1..4e75d2e4f87c 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -30,15 +30,14 @@ struct fsl8250_data { int fsl8250_handle_irq(struct uart_port *port) { unsigned char lsr, orig_lsr; - unsigned long flags; unsigned int iir; struct uart_8250_port *up = up_to_u8250p(port); - spin_lock_irqsave(&up->port.lock, flags); + spin_lock(&up->port.lock); iir = port->serial_in(port, UART_IIR); if (iir & UART_IIR_NO_INT) { - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock(&up->port.lock); return 0; } @@ -46,7 +45,7 @@ int fsl8250_handle_irq(struct uart_port *port) if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) { up->lsr_saved_flags &= ~UART_LSR_BI; port->serial_in(port, UART_RX); - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock(&up->port.lock); return 1; } @@ -82,7 +81,9 @@ int fsl8250_handle_irq(struct uart_port *port) serial8250_tx_chars(up); up->lsr_saved_flags = orig_lsr; - uart_unlock_and_check_sysrq(&up->port, flags); + + uart_unlock_and_check_sysrq(&up->port); + return 1; } EXPORT_SYMBOL_GPL(fsl8250_handle_irq); @@ -104,11 +105,8 @@ static int fsl8250_acpi_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); - if (irq < 0) { - if (irq != -EPROBE_DEFER) - dev_err(dev, "cannot get irq\n"); + if (irq < 0) return irq; - } memset(&port8250, 0, sizeof(port8250)); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 65e9045dafe6..0b077b45d6a9 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -318,6 +318,7 @@ static const struct of_device_id of_platform_serial_table[] = { { .compatible = "mrvl,mmp-uart", .data = (void *)PORT_XSCALE, }, { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, }, + { .compatible = "nuvoton,wpcm450-uart", .data = (void *)PORT_NPCM, }, { .compatible = "nuvoton,npcm750-uart", .data = (void *)PORT_NPCM, }, { /* end of list */ }, }; diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 23e0decde33e..8ac11eaeca51 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1143,7 +1143,6 @@ static int omap_8250_dma_handle_irq(struct uart_port *port) struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = up->port.private_data; unsigned char status; - unsigned long flags; u8 iir; serial8250_rpm_get(up); @@ -1154,7 +1153,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port) return IRQ_HANDLED; } - spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->lock); status = serial_port_in(port, UART_LSR); @@ -1179,7 +1178,8 @@ static int omap_8250_dma_handle_irq(struct uart_port *port) } } - uart_unlock_and_check_sysrq(port, flags); + uart_unlock_and_check_sysrq(port); + serial8250_rpm_put(up); return 1; } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index b0af13074cd3..d45dab1ab316 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1466,13 +1466,11 @@ EXPORT_SYMBOL_GPL(serial8250_em485_stop_tx); static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t) { - struct uart_8250_em485 *em485; - struct uart_8250_port *p; + struct uart_8250_em485 *em485 = container_of(t, struct uart_8250_em485, + stop_tx_timer); + struct uart_8250_port *p = em485->port; unsigned long flags; - em485 = container_of(t, struct uart_8250_em485, stop_tx_timer); - p = em485->port; - serial8250_rpm_get(p); spin_lock_irqsave(&p->port.lock, flags); if (em485->active_timer == &em485->stop_tx_timer) { @@ -1482,16 +1480,13 @@ static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t) } spin_unlock_irqrestore(&p->port.lock, flags); serial8250_rpm_put(p); + return HRTIMER_NORESTART; } static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) { - long sec = msec / 1000; - long nsec = (msec % 1000) * 1000000; - ktime_t t = ktime_set(sec, nsec); - - hrtimer_start(hrt, t, HRTIMER_MODE_REL); + hrtimer_start(hrt, ms_to_ktime(msec), HRTIMER_MODE_REL); } static void __stop_tx_rs485(struct uart_8250_port *p) @@ -1633,19 +1628,18 @@ static inline void start_tx_rs485(struct uart_port *port) static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t) { - struct uart_8250_em485 *em485; - struct uart_8250_port *p; + struct uart_8250_em485 *em485 = container_of(t, struct uart_8250_em485, + start_tx_timer); + struct uart_8250_port *p = em485->port; unsigned long flags; - em485 = container_of(t, struct uart_8250_em485, start_tx_timer); - p = em485->port; - spin_lock_irqsave(&p->port.lock, flags); if (em485->active_timer == &em485->start_tx_timer) { __start_tx(&p->port); em485->active_timer = NULL; } spin_unlock_irqrestore(&p->port.lock, flags); + return HRTIMER_NORESTART; } @@ -1885,14 +1879,13 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) int serial8250_handle_irq(struct uart_port *port, unsigned int iir) { unsigned char status; - unsigned long flags; struct uart_8250_port *up = up_to_u8250p(port); bool skip_rx = false; if (iir & UART_IIR_NO_INT) return 0; - spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->lock); status = serial_port_in(port, UART_LSR); @@ -1918,7 +1911,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) (up->ier & UART_IER_THRI)) serial8250_tx_chars(up); - uart_unlock_and_check_sysrq(port, flags); + uart_unlock_and_check_sysrq(port); + return 1; } EXPORT_SYMBOL_GPL(serial8250_handle_irq); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 603137da4736..d1b3c2373fa4 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -15,8 +15,7 @@ config SERIAL_8250 here are those that are setting up dedicated Ethernet WWW/FTP servers, or users that have one of the various bus mice instead of a serial mouse and don't intend to use their machine's standard serial - port for anything. (Note that the Cyclades multi serial port driver - does not need this driver built in for it to work.) + port for anything. To compile this driver as a module, choose M here: the module will be called 8250. @@ -226,7 +225,7 @@ config SERIAL_8250_MANY_PORTS serial port hardware which acts similar to standard serial port hardware. If you only use the standard COM 1/2/3/4 ports, you can say N here to save some memory. You can also say Y if you have an - "intelligent" multiport card such as Cyclades, Digiboards, etc. + "intelligent" multiport card such as Digiboards, etc. # # Multi-port serial cards @@ -404,7 +403,8 @@ config SERIAL_8250_RT288X config SERIAL_8250_OMAP tristate "Support for OMAP internal UART (8250 based driver)" - depends on SERIAL_8250 && (ARCH_OMAP2PLUS || ARCH_K3) + depends on SERIAL_8250 + depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST help If you have a machine based on an Texas Instruments OMAP CPU you can enable its onboard serial ports by enabling this option. @@ -440,7 +440,8 @@ config SERIAL_8250_LPC18XX config SERIAL_8250_MT6577 tristate "Mediatek serial port support" - depends on SERIAL_8250 && ARCH_MEDIATEK + depends on SERIAL_8250 + depends on ARCH_MEDIATEK || COMPILE_TEST help If you have a Mediatek based board and want to use the serial port, say Y to this option. If unsure, say N. @@ -510,6 +511,16 @@ config SERIAL_8250_TEGRA Select this option if you have machine with an NVIDIA Tegra SoC and wish to enable 8250 serial driver for the Tegra serial interfaces. +config SERIAL_8250_BCM7271 + tristate "Broadcom 8250 based serial port" + depends on SERIAL_8250 && (ARCH_BRCMSTB || COMPILE_TEST) + default ARCH_BRCMSTB + help + If you have a Broadcom STB based board and want to use the + enhanced features of the Broadcom 8250 based serial port, + including DMA support and high accuracy BAUD rates, say + Y to this option. If unsure, say N. + config SERIAL_OF_PLATFORM tristate "Devicetree based probing for 8250 ports" depends on SERIAL_8250 && OF diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index a8bfb654d490..b9bcd73c8997 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_SERIAL_8250_LPSS) += 8250_lpss.o obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o obj-$(CONFIG_SERIAL_8250_PXA) += 8250_pxa.o obj-$(CONFIG_SERIAL_8250_TEGRA) += 8250_tegra.o +obj-$(CONFIG_SERIAL_8250_BCM7271) += 8250_bcm7271.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 35ff6627c61b..63ea9c4da3d5 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -456,11 +456,11 @@ static int simple_config(struct pcmcia_device *link) * its base address, then try to grab any standard serial port * address, and finally try to get any free port. */ - if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) - goto found_port; - - dev_warn(&link->dev, "no usable port range found, giving up\n"); - return -1; + ret = pcmcia_loop_config(link, simple_config_check_notpicky, NULL); + if (ret) { + dev_warn(&link->dev, "no usable port range found, giving up\n"); + return ret; + } found_port: if (info->multi && (info->manfid == MANFID_3COM)) @@ -474,7 +474,7 @@ found_port: ret = pcmcia_enable_device(link); if (ret != 0) - return -1; + return ret; return setup_serial(link, info, link->resource[0]->start, link->irq); } diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 0c4cd4a348f4..682f9171c82c 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -20,7 +20,7 @@ comment "Non-8250 serial port support" config SERIAL_AMBA_PL010 tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA + depends on ARM_AMBA || COMPILE_TEST select SERIAL_CORE help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have @@ -198,7 +198,7 @@ config SERIAL_KGDB_NMI config SERIAL_MESON tristate "Meson serial port support" - depends on ARCH_MESON + depends on ARCH_MESON || COMPILE_TEST select SERIAL_CORE help This enables the driver for the on-chip UARTs of the Amlogic @@ -236,7 +236,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -278,7 +278,7 @@ config SERIAL_SAMSUNG_CONSOLE config SERIAL_TEGRA tristate "NVIDIA Tegra20/30 SoC serial controller" - depends on ARCH_TEGRA && TEGRA20_APB_DMA + depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST select SERIAL_CORE help Support for the on-chip UARTs on the NVIDIA Tegra series SOCs @@ -289,7 +289,8 @@ config SERIAL_TEGRA config SERIAL_TEGRA_TCU tristate "NVIDIA Tegra Combined UART" - depends on ARCH_TEGRA && TEGRA_HSP_MBOX + depends on MAILBOX + depends on (ARCH_TEGRA && TEGRA_HSP_MBOX) || COMPILE_TEST select SERIAL_CORE help Support for the mailbox-based TCU (Tegra Combined UART) serial port. @@ -498,6 +499,7 @@ config SERIAL_IMX_EARLYCON bool "Earlycon on IMX serial port" depends on ARCH_MXC || COMPILE_TEST depends on OF + select SERIAL_CORE select SERIAL_EARLYCON select SERIAL_CORE_CONSOLE default y if SERIAL_IMX_CONSOLE @@ -851,7 +853,8 @@ config SERIAL_MPC52xx_CONSOLE_BAUD config SERIAL_ICOM tristate "IBM Multiport Serial Adapter" - depends on PCI && PPC_PSERIES + depends on PCI + depends on PPC_PSERIES || COMPILE_TEST select SERIAL_CORE select FW_LOADER help @@ -920,7 +923,7 @@ config SERIAL_JSM config SERIAL_MSM tristate "MSM on-chip serial port support" - depends on ARCH_QCOM + depends on ARCH_QCOM || COMPILE_TEST select SERIAL_CORE config SERIAL_MSM_CONSOLE @@ -946,7 +949,7 @@ config SERIAL_QCOM_GENI_CONSOLE config SERIAL_VT8500 bool "VIA VT8500 on-chip serial port support" - depends on ARCH_VT8500 + depends on ARCH_VT8500 || COMPILE_TEST select SERIAL_CORE config SERIAL_VT8500_CONSOLE @@ -956,7 +959,7 @@ config SERIAL_VT8500_CONSOLE config SERIAL_OMAP tristate "OMAP serial port support" - depends on ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS || COMPILE_TEST select SERIAL_CORE help If you have a machine based on an Texas Instruments OMAP CPU you diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index d0ca9cf29b62..23c4e0e79694 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -131,9 +131,7 @@ static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp) uart_insert_char(port, 0, 0, ch, flag); } - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 0e487ce091ac..7c5f4e966b59 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -243,9 +243,7 @@ static void altera_uart_rx_chars(struct altera_uart *pp) flag); } - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } static void altera_uart_tx_chars(struct altera_uart *pp) diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index 3f96edfe569c..e744b953ca34 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -159,9 +159,7 @@ static void pl010_rx_chars(struct uart_amba_port *uap) ignore_char: status = readb(uap->port.membase + UART01x_FR); } - spin_unlock(&uap->port.lock); tty_flip_buffer_push(&uap->port.state->port); - spin_lock(&uap->port.lock); } static void pl010_tx_chars(struct uart_amba_port *uap) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4ead0c9048a8..78682c12156a 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -937,12 +937,10 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, fifotaken = pl011_fifo_to_tty(uap); } - spin_unlock(&uap->port.lock); dev_vdbg(uap->port.dev, "Took %d chars from DMA buffer and %d chars from the FIFO\n", dma_count, fifotaken); tty_flip_buffer_push(port); - spin_lock(&uap->port.lock); } static void pl011_dma_rx_irq(struct uart_amba_port *uap) diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index e8d56e899ec7..d8c937bdf3f9 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -117,9 +117,7 @@ static void apbuart_rx_chars(struct uart_port *port) status = UART_GET_STATUS(port); } - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } static void apbuart_tx_chars(struct uart_port *port) diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index c2be7cf91399..4379ca4842ae 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -385,9 +385,7 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) tty_insert_flip_char(port, ch, TTY_NORMAL); } while (max_count-- > 0); - spin_unlock(&up->port.lock); tty_flip_buffer_push(port); - spin_lock(&up->port.lock); } static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 17c3fc398fc6..1a9444b6b57e 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -236,9 +236,7 @@ static void arc_serial_rx_chars(struct uart_port *port, unsigned int status) if (!(uart_handle_sysrq_char(port, ch))) uart_insert_char(port, status, RXOERR, ch, flg); - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } while (!((status = UART_GET_STATUS(port)) & RXEMPTY)); } diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a24e5c2b30bc..058886d9045b 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1178,13 +1178,7 @@ static void atmel_rx_from_dma(struct uart_port *port) 1, DMA_FROM_DEVICE); - /* - * Drop the lock here since it might end up calling - * uart_start(), which takes the lock. - */ - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_TIMEOUT); } @@ -1576,13 +1570,7 @@ static void atmel_rx_from_ring(struct uart_port *port) uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg); } - /* - * Drop the lock here since it might end up calling - * uart_start(), which takes the lock. - */ - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } static void atmel_release_rx_pdc(struct uart_port *port) @@ -1667,13 +1655,7 @@ static void atmel_rx_from_pdc(struct uart_port *port) } } while (head >= pdc->dma_size); - /* - * Drop the lock here since it might end up calling - * uart_start(), which takes the lock. - */ - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 5674da2b76f0..5fb0e84f7fd1 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -294,9 +294,7 @@ static void bcm_uart_do_rx(struct uart_port *port) } while (--max_count); - spin_unlock(&port->lock); tty_flip_buffer_push(tty_port); - spin_lock(&port->lock); } /* diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 94af7a5ea497..9e9abfc4824a 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -829,9 +829,7 @@ ignore_char: } icom_port->next_rcv = rcv_buff; - spin_unlock(&icom_port->uart_port.lock); tty_flip_buffer_push(port); - spin_lock(&icom_port->uart_port.lock); } static void process_interrupt(u16 port_int_reg, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 8257597d034d..7d5a8dfa3e91 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -394,11 +394,7 @@ static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2) static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) { - long sec = msec / MSEC_PER_SEC; - long nsec = (msec % MSEC_PER_SEC) * 1000000; - ktime_t t = ktime_set(sec, nsec); - - hrtimer_start(hrt, t, HRTIMER_MODE_REL); + hrtimer_start(hrt, ms_to_ktime(msec), HRTIMER_MODE_REL); } /* called with port.lock taken and irqs off */ @@ -922,14 +918,8 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id) struct imx_port *sport = dev_id; unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4; irqreturn_t ret = IRQ_NONE; - unsigned long flags = 0; - /* - * IRQs might not be disabled upon entering this interrupt handler, - * e.g. when interrupt handlers are forced to be threaded. To support - * this scenario as well, disable IRQs when acquiring the spinlock. - */ - spin_lock_irqsave(&sport->port.lock, flags); + spin_lock(&sport->port.lock); usr1 = imx_uart_readl(sport, USR1); usr2 = imx_uart_readl(sport, USR2); @@ -999,7 +989,7 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id) ret = IRQ_HANDLED; } - spin_unlock_irqrestore(&sport->port.lock, flags); + spin_unlock(&sport->port.lock); return ret; } diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index 512b77195e9f..8e42a7682c63 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -603,18 +603,22 @@ void jsm_input(struct jsm_channel *ch) if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { for (i = 0; i < s; i++) { + u8 chr = ch->ch_rqueue[tail + i]; + u8 error = ch->ch_equeue[tail + i]; + char flag = TTY_NORMAL; + /* - * Give the Linux ld the flags in the - * format it likes. + * Give the Linux ld the flags in the format it + * likes. */ - if (*(ch->ch_equeue + tail + i) & UART_LSR_BI) - tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_BREAK); - else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) - tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_PARITY); - else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) - tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_FRAME); - else - tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_NORMAL); + if (error & UART_LSR_BI) + flag = TTY_BREAK; + else if (error & UART_LSR_PE) + flag = TTY_PARITY; + else if (error & UART_LSR_FE) + flag = TTY_FRAME; + + tty_insert_flip_char(port, chr, flag); } } else { tty_insert_flip_string(port, ch->ch_rqueue + tail, s); diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 6004c0c1d173..db059b66438e 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -373,9 +373,7 @@ int kgdb_unregister_nmi_console(void) if (ret) return ret; - ret = tty_unregister_driver(kgdb_nmi_tty_driver); - if (ret) - return ret; + tty_unregister_driver(kgdb_nmi_tty_driver); put_tty_driver(kgdb_nmi_tty_driver); return 0; diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index 64842f3539e1..0b06770642cb 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -270,8 +270,8 @@ static int liteuart_probe(struct platform_device *pdev) /* get membase */ port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); - if (!port->membase) - return -ENXIO; + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); /* values not from device tree */ port->dev = &pdev->dev; diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 1fa098d7aec4..b199d7859961 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -273,9 +273,7 @@ static void __serial_lpc32xx_rx(struct uart_port *port) tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); } - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); } static void __serial_lpc32xx_tx(struct uart_port *port) diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 1b61d26bb7af..8534d6e45a1d 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -273,7 +273,7 @@ struct max310x_port { #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif - struct max310x_one p[0]; + struct max310x_one p[]; }; static struct uart_driver max310x_uart = { diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 09c88c48fb7b..c7cec7d03620 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -319,9 +319,7 @@ static void mcf_rx_chars(struct mcf_uart *pp) uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); } - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } /****************************************************************************/ diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 69eeef9edfa5..529cd0289056 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -226,9 +226,7 @@ static void meson_receive_chars(struct uart_port *port) } while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)); - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); } static irqreturn_t meson_uart_interrupt(int irq, void *dev_id) diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index af1700445251..2704dc988e4a 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1421,9 +1421,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) } } - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); return psc_ops->raw_rx_rdy(port); } diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 770c182e2208..fcef7a961430 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -757,9 +757,7 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr) count -= r_count; } - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); if (misr & (UART_IMR_RXSTALE)) msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); @@ -819,9 +817,7 @@ static void msm_handle_rx(struct uart_port *port) tty_insert_flip_char(tport, c, flag); } - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); } static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 76b94d0ff586..84e8158088cd 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -159,6 +159,8 @@ struct uart_omap_port { u32 calc_latency; struct work_struct qos_work; bool is_suspending; + + unsigned int rs485_tx_filter_count; }; #define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port))) @@ -302,7 +304,8 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_OMAP_SCR, up->scr); res = (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0; - if (gpiod_get_value(up->rts_gpiod) != res) { + if (up->rts_gpiod && + gpiod_get_value(up->rts_gpiod) != res) { if (port->rs485.delay_rts_after_send > 0) mdelay( port->rs485.delay_rts_after_send); @@ -328,19 +331,6 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { - /* - * Empty the RX FIFO, we are not interested in anything - * received during the half-duplex transmission. - */ - serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR); - /* Re-enable RX interrupts */ - up->ier |= UART_IER_RLSI | UART_IER_RDI; - up->port.read_status_mask |= UART_LSR_DR; - serial_out(up, UART_IER, up->ier); - } - pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -366,6 +356,10 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) serial_out(up, UART_TX, up->port.x_char); up->port.icount.tx++; up->port.x_char = 0; + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) + up->rs485_tx_filter_count++; + return; } if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { @@ -377,6 +371,10 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); up->port.icount.tx++; + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) + up->rs485_tx_filter_count++; + if (uart_circ_empty(xmit)) break; } while (--count > 0); @@ -411,7 +409,7 @@ static void serial_omap_start_tx(struct uart_port *port) /* if rts not already enabled */ res = (port->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0; - if (gpiod_get_value(up->rts_gpiod) != res) { + if (up->rts_gpiod && gpiod_get_value(up->rts_gpiod) != res) { gpiod_set_value(up->rts_gpiod, res); if (port->rs485.delay_rts_before_send > 0) mdelay(port->rs485.delay_rts_before_send); @@ -420,7 +418,7 @@ static void serial_omap_start_tx(struct uart_port *port) if ((port->rs485.flags & SER_RS485_ENABLED) && !(port->rs485.flags & SER_RS485_RX_DURING_TX)) - serial_omap_stop_rx(port); + up->rs485_tx_filter_count = 0; serial_omap_enable_ier_thri(up); pm_runtime_mark_last_busy(up->dev); @@ -491,8 +489,13 @@ static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr) * Read one data character out to avoid stalling the receiver according * to the table 23-246 of the omap4 TRM. */ - if (likely(lsr & UART_LSR_DR)) + if (likely(lsr & UART_LSR_DR)) { serial_in(up, UART_RX); + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX) && + up->rs485_tx_filter_count) + up->rs485_tx_filter_count--; + } up->port.icount.rx++; flag = TTY_NORMAL; @@ -543,6 +546,13 @@ static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr) return; ch = serial_in(up, UART_RX); + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX) && + up->rs485_tx_filter_count) { + up->rs485_tx_filter_count--; + return; + } + flag = TTY_NORMAL; up->port.icount.rx++; @@ -1407,18 +1417,13 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) /* store new config */ port->rs485 = *rs485; - /* - * Just as a precaution, only allow rs485 - * to be enabled if the gpio pin is valid - */ if (up->rts_gpiod) { /* enable / disable rts */ val = (port->rs485.flags & SER_RS485_ENABLED) ? SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; val = (port->rs485.flags & val) ? 1 : 0; gpiod_set_value(up->rts_gpiod, val); - } else - port->rs485.flags &= ~SER_RS485_ENABLED; + } /* Enable interrupts */ up->ier = mode; diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index abc6042f0378..91f1eb0058d7 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -247,9 +247,7 @@ static void owl_uart_receive_chars(struct uart_port *port) stat = owl_uart_read(port, OWL_UART_STAT); } - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } static irqreturn_t owl_uart_irq(int irq, void *dev_id) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index a7363bc66c11..f0351e6f0ef6 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -236,7 +236,6 @@ struct eg20t_port { void *rx_buf_virt; dma_addr_t rx_buf_dma; - struct dentry *debugfs; #define IRQ_NAME_SIZE 17 char irq_name[IRQ_NAME_SIZE]; @@ -292,8 +291,6 @@ static const int trigger_level_64[4] = { 1, 16, 32, 56 }; static const int trigger_level_16[4] = { 1, 4, 8, 14 }; static const int trigger_level_1[4] = { 1, 1, 1, 1 }; -#ifdef CONFIG_DEBUG_FS - #define PCH_REGS_BUFSIZE 1024 @@ -353,7 +350,6 @@ static const struct file_operations port_regs_ops = { .read = port_show_regs, .llseek = default_llseek, }; -#endif /* CONFIG_DEBUG_FS */ static const struct dmi_system_id pch_uart_dmi_table[] = { { @@ -1735,9 +1731,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, int fifosize; int port_type; struct pch_uart_driver_data *board; -#ifdef CONFIG_DEBUG_FS - char name[32]; /* for debugfs file name */ -#endif + char name[32]; board = &drv_dat[id->driver_data]; port_type = board->port_type; @@ -1813,11 +1807,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (ret < 0) goto init_port_hal_free; -#ifdef CONFIG_DEBUG_FS - snprintf(name, sizeof(name), "uart%d_regs", board->line_no); - priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO, - NULL, priv, &port_regs_ops); -#endif + snprintf(name, sizeof(name), "uart%d_regs", priv->port.line); + debugfs_create_file(name, S_IFREG | S_IRUGO, NULL, priv, + &port_regs_ops); return priv; @@ -1835,10 +1827,10 @@ init_port_alloc_err: static void pch_uart_exit_port(struct eg20t_port *priv) { + char name[32]; -#ifdef CONFIG_DEBUG_FS - debugfs_remove(priv->debugfs); -#endif + snprintf(name, sizeof(name), "uart%d_regs", priv->port.line); + debugfs_remove(debugfs_lookup(name, NULL)); uart_remove_one_port(&pch_uart_driver, &priv->port); free_page((unsigned long)priv->rxbuf.buf); } diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 0d85b55ea823..00bb88a71606 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -818,7 +818,6 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) u32 s_irq_status; u32 geni_status; struct uart_port *uport = dev; - unsigned long flags; bool drop_rx = false; struct tty_port *tport = &uport->state->port; struct qcom_geni_serial_port *port = to_dev_port(uport, uport); @@ -826,7 +825,8 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) if (uport->suspended) return IRQ_NONE; - spin_lock_irqsave(&uport->lock, flags); + spin_lock(&uport->lock); + m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); geni_status = readl(uport->membase + SE_GENI_STATUS); @@ -861,7 +861,7 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) qcom_geni_serial_handle_rx(uport, drop_rx); out_unlock: - uart_unlock_and_check_sysrq(uport, flags); + uart_unlock_and_check_sysrq(uport); return IRQ_HANDLED; } diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index 85366e059258..d550d8fa2fab 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -398,9 +398,7 @@ static void rda_uart_receive_chars(struct uart_port *port) status = rda_uart_read(port, RDA_UART_STATUS); } - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } static irqreturn_t rda_interrupt(int irq, void *dev_id) diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c index 5690c09cc041..d60abffab70e 100644 --- a/drivers/tty/serial/rp2.c +++ b/drivers/tty/serial/rp2.c @@ -424,9 +424,7 @@ static void rp2_rx_chars(struct rp2_uart_port *up) up->port.icount.rx++; } - spin_unlock(&up->port.lock); tty_flip_buffer_push(port); - spin_lock(&up->port.lock); } static void rp2_tx_chars(struct rp2_uart_port *up) diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index f5fab1dd96bc..697b6a002a16 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -223,9 +223,7 @@ sa1100_rx_chars(struct sa1100_port *sport) UTSR0_TO_SM(UART_GET_UTSR0(sport)); } - spin_unlock(&sport->port.lock); tty_flip_buffer_push(&sport->port.state->port); - spin_lock(&sport->port.lock); } static void sa1100_tx_chars(struct sa1100_port *sport) diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 8ae3e03fbd8c..d9e4b67a12a0 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -56,9 +56,16 @@ /* flag to ignore all characters coming in */ #define RXSTAT_DUMMY_READ (0x10000000) +enum s3c24xx_port_type { + TYPE_S3C24XX, + TYPE_S3C6400, + TYPE_APPLE_S5L, +}; + struct s3c24xx_uart_info { char *name; - unsigned int type; + enum s3c24xx_port_type type; + unsigned int port_type; unsigned int fifosize; unsigned long rx_fifomask; unsigned long rx_fifoshift; @@ -70,6 +77,7 @@ struct s3c24xx_uart_info { unsigned long num_clks; unsigned long clksel_mask; unsigned long clksel_shift; + unsigned long ucon_mask; /* uart port features */ @@ -144,6 +152,8 @@ struct s3c24xx_uart_port { #endif }; +static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport); + /* conversion functions */ #define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev) @@ -228,16 +238,6 @@ static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; } -/* - * s3c64xx and later SoC's include the interrupt mask and status registers in - * the controller itself, unlike the s3c24xx SoC's which have these registers - * in the interrupt controller. Check if the port type is s3c64xx or higher. - */ -static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port) -{ - return to_ourport(port)->info->type == PORT_S3C6400; -} - static void s3c24xx_serial_rx_enable(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -289,10 +289,17 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) if (!ourport->tx_enabled) return; - if (s3c24xx_serial_has_interrupt_mask(port)) + switch (ourport->info->type) { + case TYPE_S3C6400: s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); - else + break; + case TYPE_APPLE_S5L: + s3c24xx_clear_bit(port, APPLE_S5L_UCON_TXTHRESH_ENA, S3C2410_UCON); + break; + default: disable_irq_nosync(ourport->tx_irq); + break; + } if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) { dmaengine_pause(dma->tx_chan); @@ -353,10 +360,17 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport) u32 ucon; /* Mask Tx interrupt */ - if (s3c24xx_serial_has_interrupt_mask(port)) + switch (ourport->info->type) { + case TYPE_S3C6400: s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); - else + break; + case TYPE_APPLE_S5L: + WARN_ON(1); // No DMA + break; + default: disable_irq_nosync(ourport->tx_irq); + break; + } /* Enable tx dma mode */ ucon = rd_regl(port, S3C2410_UCON); @@ -386,13 +400,28 @@ static void enable_tx_pio(struct s3c24xx_uart_port *ourport) wr_regl(port, S3C2410_UCON, ucon); /* Unmask Tx interrupt */ - if (s3c24xx_serial_has_interrupt_mask(port)) + switch (ourport->info->type) { + case TYPE_S3C6400: s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); - else + break; + case TYPE_APPLE_S5L: + ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK; + wr_regl(port, S3C2410_UCON, ucon); + break; + default: enable_irq(ourport->tx_irq); + break; + } ourport->tx_mode = S3C24XX_TX_PIO; + + /* + * The Apple version only has edge triggered TX IRQs, so we need + * to kick off the process by sending some characters here. + */ + if (ourport->info->type == TYPE_APPLE_S5L) + s3c24xx_serial_tx_chars(ourport); } static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport) @@ -513,11 +542,19 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) if (ourport->rx_enabled) { dev_dbg(port->dev, "stopping rx\n"); - if (s3c24xx_serial_has_interrupt_mask(port)) + switch (ourport->info->type) { + case TYPE_S3C6400: s3c24xx_set_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM); - else + break; + case TYPE_APPLE_S5L: + s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); + s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON); + break; + default: disable_irq_nosync(ourport->rx_irq); + break; + } ourport->rx_enabled = 0; } if (dma && dma->rx_chan) { @@ -651,14 +688,18 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport) /* set Rx mode to DMA mode */ ucon = rd_regl(port, S3C2410_UCON); - ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | - S3C64XX_UCON_EMPTYINT_EN | - S3C64XX_UCON_DMASUS_EN | - S3C64XX_UCON_TIMEOUT_EN | - S3C64XX_UCON_RXMODE_MASK); - ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | - S3C64XX_UCON_TIMEOUT_EN | - S3C64XX_UCON_RXMODE_CPU; + ucon &= ~S3C64XX_UCON_RXMODE_MASK; + ucon |= S3C64XX_UCON_RXMODE_CPU; + + /* Apple types use these bits for IRQ masks */ + if (ourport->info->type != TYPE_APPLE_S5L) { + ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | + S3C64XX_UCON_EMPTYINT_EN | + S3C64XX_UCON_DMASUS_EN | + S3C64XX_UCON_TIMEOUT_EN); + ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | + S3C64XX_UCON_TIMEOUT_EN; + } wr_regl(port, S3C2410_UCON, ucon); ourport->rx_mode = S3C24XX_RX_PIO; @@ -674,13 +715,12 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) struct s3c24xx_uart_dma *dma = ourport->dma; struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); struct tty_port *t = &port->state->port; - unsigned long flags; struct dma_tx_state state; utrstat = rd_regl(port, S3C2410_UTRSTAT); rd_regl(port, S3C2410_UFSTAT); - spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->lock); if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { s3c64xx_start_rx_dma(ourport); @@ -709,7 +749,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); finish: - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock(&port->lock); return IRQ_HANDLED; } @@ -805,16 +845,15 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id) { struct s3c24xx_uart_port *ourport = dev_id; struct uart_port *port = &ourport->port; - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->lock); s3c24xx_serial_rx_drain_fifo(ourport); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock(&port->lock); return IRQ_HANDLED; } -static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id) +static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id) { struct s3c24xx_uart_port *ourport = dev_id; @@ -823,16 +862,12 @@ static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id) return s3c24xx_serial_rx_chars_pio(dev_id); } -static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) +static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport) { - struct s3c24xx_uart_port *ourport = id; struct uart_port *port = &ourport->port; struct circ_buf *xmit = &port->state->xmit; - unsigned long flags; int count, dma_count = 0; - spin_lock_irqsave(&port->lock, flags); - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); if (ourport->dma && ourport->dma->tx_chan && @@ -849,7 +884,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) wr_reg(port, S3C2410_UTXH, port->x_char); port->icount.tx++; port->x_char = 0; - goto out; + return; } /* if there isn't anything more to transmit, or the uart is now @@ -858,7 +893,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { s3c24xx_serial_stop_tx(port); - goto out; + return; } /* try and drain the buffer... */ @@ -880,7 +915,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) if (!count && dma_count) { s3c24xx_serial_start_tx_dma(ourport, dma_count); - goto out; + return; } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { @@ -891,9 +926,18 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) if (uart_circ_empty(xmit)) s3c24xx_serial_stop_tx(port); +} -out: - spin_unlock_irqrestore(&port->lock, flags); +static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id) +{ + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + + spin_lock(&port->lock); + + s3c24xx_serial_tx_chars(ourport); + + spin_unlock(&port->lock); return IRQ_HANDLED; } @@ -906,16 +950,37 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) irqreturn_t ret = IRQ_HANDLED; if (pend & S3C64XX_UINTM_RXD_MSK) { - ret = s3c24xx_serial_rx_chars(irq, id); + ret = s3c24xx_serial_rx_irq(irq, id); wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); } if (pend & S3C64XX_UINTM_TXD_MSK) { - ret = s3c24xx_serial_tx_chars(irq, id); + ret = s3c24xx_serial_tx_irq(irq, id); wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); } return ret; } +/* interrupt handler for Apple SoC's.*/ +static irqreturn_t apple_serial_handle_irq(int irq, void *id) +{ + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + unsigned int pend = rd_regl(port, S3C2410_UTRSTAT); + irqreturn_t ret = IRQ_NONE; + + if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) { + wr_regl(port, S3C2410_UTRSTAT, + APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO); + ret = s3c24xx_serial_rx_irq(irq, id); + } + if (pend & APPLE_S5L_UTRSTAT_TXTHRESH) { + wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_TXTHRESH); + ret = s3c24xx_serial_tx_irq(irq, id); + } + + return ret; +} + static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); @@ -1098,27 +1163,62 @@ static void s3c24xx_serial_shutdown(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); if (ourport->tx_claimed) { - if (!s3c24xx_serial_has_interrupt_mask(port)) - free_irq(ourport->tx_irq, ourport); + free_irq(ourport->tx_irq, ourport); ourport->tx_enabled = 0; ourport->tx_claimed = 0; ourport->tx_mode = 0; } if (ourport->rx_claimed) { - if (!s3c24xx_serial_has_interrupt_mask(port)) - free_irq(ourport->rx_irq, ourport); + free_irq(ourport->rx_irq, ourport); ourport->rx_claimed = 0; ourport->rx_enabled = 0; } - /* Clear pending interrupts and mask all interrupts */ - if (s3c24xx_serial_has_interrupt_mask(port)) { - free_irq(port->irq, ourport); + if (ourport->dma) + s3c24xx_serial_release_dma(ourport); - wr_regl(port, S3C64XX_UINTP, 0xf); - wr_regl(port, S3C64XX_UINTM, 0xf); - } + ourport->tx_in_progress = 0; +} + +static void s3c64xx_serial_shutdown(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + ourport->tx_enabled = 0; + ourport->tx_mode = 0; + ourport->rx_enabled = 0; + + free_irq(port->irq, ourport); + + wr_regl(port, S3C64XX_UINTP, 0xf); + wr_regl(port, S3C64XX_UINTM, 0xf); + + if (ourport->dma) + s3c24xx_serial_release_dma(ourport); + + ourport->tx_in_progress = 0; +} + +static void apple_s5l_serial_shutdown(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + unsigned int ucon; + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | + APPLE_S5L_UCON_RXTHRESH_ENA_MSK | + APPLE_S5L_UCON_RXTO_ENA_MSK); + wr_regl(port, S3C2410_UCON, ucon); + + wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); + + free_irq(port->irq, ourport); + + ourport->tx_enabled = 0; + ourport->tx_mode = 0; + ourport->rx_enabled = 0; if (ourport->dma) s3c24xx_serial_release_dma(ourport); @@ -1133,7 +1233,7 @@ static int s3c24xx_serial_startup(struct uart_port *port) ourport->rx_enabled = 1; - ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, + ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0, s3c24xx_serial_portname(port), ourport); if (ret != 0) { @@ -1147,7 +1247,7 @@ static int s3c24xx_serial_startup(struct uart_port *port) ourport->tx_enabled = 1; - ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, + ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0, s3c24xx_serial_portname(port), ourport); if (ret) { @@ -1193,9 +1293,7 @@ static int s3c64xx_serial_startup(struct uart_port *port) /* For compatibility with s3c24xx Soc's */ ourport->rx_enabled = 1; - ourport->rx_claimed = 1; ourport->tx_enabled = 0; - ourport->tx_claimed = 1; spin_lock_irqsave(&port->lock, flags); @@ -1215,6 +1313,45 @@ static int s3c64xx_serial_startup(struct uart_port *port) return ret; } +static int apple_s5l_serial_startup(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long flags; + unsigned int ufcon; + int ret; + + wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); + + ret = request_irq(port->irq, apple_serial_handle_irq, 0, + s3c24xx_serial_portname(port), ourport); + if (ret) { + dev_err(port->dev, "cannot get irq %d\n", port->irq); + return ret; + } + + /* For compatibility with s3c24xx Soc's */ + ourport->rx_enabled = 1; + ourport->tx_enabled = 0; + + spin_lock_irqsave(&port->lock, flags); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; + if (!uart_console(port)) + ufcon |= S3C2410_UFCON_RESETTX; + wr_regl(port, S3C2410_UFCON, ufcon); + + enable_rx_pio(ourport); + + spin_unlock_irqrestore(&port->lock, flags); + + /* Enable Rx Interrupt */ + s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); + s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON); + + return ret; +} + /* power power management control */ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, @@ -1535,41 +1672,26 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, static const char *s3c24xx_serial_type(struct uart_port *port) { - switch (port->type) { - case PORT_S3C2410: - return "S3C2410"; - case PORT_S3C2440: - return "S3C2440"; - case PORT_S3C2412: - return "S3C2412"; - case PORT_S3C6400: + struct s3c24xx_uart_port *ourport = to_ourport(port); + + switch (ourport->info->type) { + case TYPE_S3C24XX: + return "S3C24XX"; + case TYPE_S3C6400: return "S3C6400/10"; + case TYPE_APPLE_S5L: + return "APPLE S5L"; default: return NULL; } } -#define MAP_SIZE (0x100) - -static void s3c24xx_serial_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, MAP_SIZE); -} - -static int s3c24xx_serial_request_port(struct uart_port *port) -{ - const char *name = s3c24xx_serial_portname(port); - - return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; -} - static void s3c24xx_serial_config_port(struct uart_port *port, int flags) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - if (flags & UART_CONFIG_TYPE && - s3c24xx_serial_request_port(port) == 0) - port->type = info->type; + if (flags & UART_CONFIG_TYPE) + port->type = info->port_type; } /* @@ -1580,7 +1702,7 @@ s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - if (ser->type != PORT_UNKNOWN && ser->type != info->type) + if (ser->type != PORT_UNKNOWN && ser->type != info->port_type) return -EINVAL; return 0; @@ -1608,7 +1730,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, unsigned char c); #endif -static struct uart_ops s3c24xx_serial_ops = { +static const struct uart_ops s3c24xx_serial_ops = { .pm = s3c24xx_serial_pm, .tx_empty = s3c24xx_serial_tx_empty, .get_mctrl = s3c24xx_serial_get_mctrl, @@ -1621,8 +1743,48 @@ static struct uart_ops s3c24xx_serial_ops = { .shutdown = s3c24xx_serial_shutdown, .set_termios = s3c24xx_serial_set_termios, .type = s3c24xx_serial_type, - .release_port = s3c24xx_serial_release_port, - .request_port = s3c24xx_serial_request_port, + .config_port = s3c24xx_serial_config_port, + .verify_port = s3c24xx_serial_verify_port, +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) + .poll_get_char = s3c24xx_serial_get_poll_char, + .poll_put_char = s3c24xx_serial_put_poll_char, +#endif +}; + +static const struct uart_ops s3c64xx_serial_ops = { + .pm = s3c24xx_serial_pm, + .tx_empty = s3c24xx_serial_tx_empty, + .get_mctrl = s3c24xx_serial_get_mctrl, + .set_mctrl = s3c24xx_serial_set_mctrl, + .stop_tx = s3c24xx_serial_stop_tx, + .start_tx = s3c24xx_serial_start_tx, + .stop_rx = s3c24xx_serial_stop_rx, + .break_ctl = s3c24xx_serial_break_ctl, + .startup = s3c64xx_serial_startup, + .shutdown = s3c64xx_serial_shutdown, + .set_termios = s3c24xx_serial_set_termios, + .type = s3c24xx_serial_type, + .config_port = s3c24xx_serial_config_port, + .verify_port = s3c24xx_serial_verify_port, +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) + .poll_get_char = s3c24xx_serial_get_poll_char, + .poll_put_char = s3c24xx_serial_put_poll_char, +#endif +}; + +static const struct uart_ops apple_s5l_serial_ops = { + .pm = s3c24xx_serial_pm, + .tx_empty = s3c24xx_serial_tx_empty, + .get_mctrl = s3c24xx_serial_get_mctrl, + .set_mctrl = s3c24xx_serial_set_mctrl, + .stop_tx = s3c24xx_serial_stop_tx, + .start_tx = s3c24xx_serial_start_tx, + .stop_rx = s3c24xx_serial_stop_rx, + .break_ctl = s3c24xx_serial_break_ctl, + .startup = apple_s5l_serial_startup, + .shutdown = apple_s5l_serial_shutdown, + .set_termios = s3c24xx_serial_set_termios, + .type = s3c24xx_serial_type, .config_port = s3c24xx_serial_config_port, .verify_port = s3c24xx_serial_verify_port, #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) @@ -1706,14 +1868,9 @@ static void s3c24xx_serial_resetport(struct uart_port *port, { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned long ucon = rd_regl(port, S3C2410_UCON); - unsigned int ucon_mask; - ucon_mask = info->clksel_mask; - if (info->type == PORT_S3C2440) - ucon_mask |= S3C2440_UCON0_DIVMASK; - - ucon &= ucon_mask; - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + ucon &= (info->clksel_mask | info->ucon_mask); + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); @@ -1868,10 +2025,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, /* setup info for port */ port->dev = &platdev->dev; - /* Startup sequence is different for s3c64xx and higher SoC's */ - if (s3c24xx_serial_has_interrupt_mask(port)) - s3c24xx_serial_ops.startup = s3c64xx_serial_startup; - port->uartclk = 1; if (cfg->uart_flags & UPF_CONS_FLOW) { @@ -1889,8 +2042,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dev_dbg(port->dev, "resource %pR)\n", res); - port->membase = devm_ioremap(port->dev, res->start, resource_size(res)); - if (!port->membase) { + port->membase = devm_ioremap_resource(port->dev, res); + if (IS_ERR(port->membase)) { dev_err(port->dev, "failed to remap controller address\n"); return -EBUSY; } @@ -1905,11 +2058,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->tx_irq = ret + 1; } - if (!s3c24xx_serial_has_interrupt_mask(port)) { + switch (ourport->info->type) { + case TYPE_S3C24XX: ret = platform_get_irq(platdev, 1); if (ret > 0) ourport->tx_irq = ret; + break; + default: + break; } + /* * DMA is currently supported only on DT platforms, if DMA properties * are specified. @@ -1945,10 +2103,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, pr_warn("uart: failed to enable baudclk\n"); /* Keep all interrupts masked and cleared */ - if (s3c24xx_serial_has_interrupt_mask(port)) { + switch (ourport->info->type) { + case TYPE_S3C6400: wr_regl(port, S3C64XX_UINTM, 0xf); wr_regl(port, S3C64XX_UINTP, 0xf); wr_regl(port, S3C64XX_UINTSP, 0xf); + break; + case TYPE_APPLE_S5L: { + unsigned int ucon; + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | + APPLE_S5L_UCON_RXTHRESH_ENA_MSK | + APPLE_S5L_UCON_RXTO_ENA_MSK); + wr_regl(port, S3C2410_UCON, ucon); + + wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); + break; + } + default: + break; } dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n", @@ -2019,6 +2193,18 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) dev_get_platdata(&pdev->dev) : ourport->drv_data->def_cfg; + switch (ourport->info->type) { + case TYPE_S3C24XX: + ourport->port.ops = &s3c24xx_serial_ops; + break; + case TYPE_S3C6400: + ourport->port.ops = &s3c64xx_serial_ops; + break; + case TYPE_APPLE_S5L: + ourport->port.ops = &apple_s5l_serial_ops; + break; + } + if (np) { of_property_read_u32(np, "samsung,uart-fifosize", &ourport->port.fifosize); @@ -2142,7 +2328,8 @@ static int s3c24xx_serial_resume_noirq(struct device *dev) if (port) { /* restore IRQ mask */ - if (s3c24xx_serial_has_interrupt_mask(port)) { + switch (ourport->info->type) { + case TYPE_S3C6400: { unsigned int uintm = 0xf; if (ourport->tx_enabled) @@ -2156,6 +2343,47 @@ static int s3c24xx_serial_resume_noirq(struct device *dev) if (!IS_ERR(ourport->baudclk)) clk_disable_unprepare(ourport->baudclk); clk_disable_unprepare(ourport->clk); + break; + } + case TYPE_APPLE_S5L: { + unsigned int ucon; + int ret; + + ret = clk_prepare_enable(ourport->clk); + if (ret) { + dev_err(dev, "clk_enable clk failed: %d\n", ret); + return ret; + } + if (!IS_ERR(ourport->baudclk)) { + ret = clk_prepare_enable(ourport->baudclk); + if (ret) { + dev_err(dev, "clk_enable baudclk failed: %d\n", ret); + clk_disable_unprepare(ourport->clk); + return ret; + } + } + + ucon = rd_regl(port, S3C2410_UCON); + + ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | + APPLE_S5L_UCON_RXTHRESH_ENA_MSK | + APPLE_S5L_UCON_RXTO_ENA_MSK); + + if (ourport->tx_enabled) + ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK; + if (ourport->rx_enabled) + ucon |= APPLE_S5L_UCON_RXTHRESH_ENA_MSK | + APPLE_S5L_UCON_RXTO_ENA_MSK; + + wr_regl(port, S3C2410_UCON, ucon); + + if (!IS_ERR(ourport->baudclk)) + clk_disable_unprepare(ourport->baudclk); + clk_disable_unprepare(ourport->clk); + break; + } + default: + break; } } @@ -2380,7 +2608,8 @@ static struct console s3c24xx_serial_console = { static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung S3C2410 UART", - .type = PORT_S3C2410, + .type = TYPE_S3C24XX, + .port_type = PORT_S3C2410, .fifosize = 16, .rx_fifomask = S3C2410_UFSTAT_RXMASK, .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, @@ -2407,7 +2636,8 @@ static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung S3C2412 UART", - .type = PORT_S3C2412, + .type = TYPE_S3C24XX, + .port_type = PORT_S3C2412, .fifosize = 64, .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, @@ -2436,7 +2666,8 @@ static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung S3C2440 UART", - .type = PORT_S3C2440, + .type = TYPE_S3C24XX, + .port_type = PORT_S3C2440, .fifosize = 64, .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, @@ -2449,6 +2680,7 @@ static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { .num_clks = 4, .clksel_mask = S3C2412_UCON_CLKMASK, .clksel_shift = S3C2412_UCON_CLKSHIFT, + .ucon_mask = S3C2440_UCON0_DIVMASK, }, .def_cfg = &(struct s3c2410_uartcfg) { .ucon = S3C2410_UCON_DEFAULT, @@ -2464,7 +2696,8 @@ static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung S3C6400 UART", - .type = PORT_S3C6400, + .type = TYPE_S3C6400, + .port_type = PORT_S3C6400, .fifosize = 64, .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, @@ -2492,7 +2725,8 @@ static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung S5PV210 UART", - .type = PORT_S3C6400, + .type = TYPE_S3C6400, + .port_type = PORT_S3C6400, .has_divslot = 1, .rx_fifomask = S5PV210_UFSTAT_RXMASK, .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, @@ -2520,7 +2754,8 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #define EXYNOS_COMMON_SERIAL_DRV_DATA \ .info = &(struct s3c24xx_uart_info) { \ .name = "Samsung Exynos UART", \ - .type = PORT_S3C6400, \ + .type = TYPE_S3C6400, \ + .port_type = PORT_S3C6400, \ .has_divslot = 1, \ .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ @@ -2556,6 +2791,34 @@ static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL #endif +#ifdef CONFIG_ARCH_APPLE +static struct s3c24xx_serial_drv_data s5l_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Apple S5L UART", + .type = TYPE_APPLE_S5L, + .port_type = PORT_8250, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 1, + .clksel_mask = 0, + .clksel_shift = 0, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = APPLE_S5L_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data) +#else +#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL) +#endif + static const struct platform_device_id s3c24xx_serial_driver_ids[] = { { .name = "s3c2410-uart", @@ -2578,6 +2841,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = { }, { .name = "exynos5433-uart", .driver_data = EXYNOS5433_SERIAL_DRV_DATA, + }, { + .name = "s5l-uart", + .driver_data = S5L_SERIAL_DRV_DATA, }, { }, }; @@ -2599,6 +2865,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = { .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, { .compatible = "samsung,exynos5433-uart", .data = (void *)EXYNOS5433_SERIAL_DRV_DATA }, + { .compatible = "apple,s5l-uart", + .data = (void *)S5L_SERIAL_DRV_DATA }, {}, }; MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); @@ -2730,6 +2998,23 @@ OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", s5pv210_early_console_setup); OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", s5pv210_early_console_setup); + +/* Apple S5L */ +static int __init apple_s5l_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + /* Close enough to S3C2410 for earlycon... */ + device->port.private_data = &s3c2410_early_console_data; + +#ifdef CONFIG_ARM64 + /* ... but we need to override the existing fixmap entry as nGnRnE */ + __set_fixmap(FIX_EARLYCON_MEM_BASE, device->port.mapbase, + __pgprot(PROT_DEVICE_nGnRnE)); +#endif + return samsung_early_console_setup(device, opt); +} + +OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup); #endif MODULE_ALIAS("platform:samsung-uart"); diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index f86ec2d2635b..9adb8362578c 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1196,7 +1196,7 @@ static int sc16is7xx_probe(struct device *dev, ret = regmap_read(regmap, SC16IS7XX_LSR_REG << SC16IS7XX_REG_SHIFT, &val); if (ret < 0) - return ret; + return -EPROBE_DEFER; /* Alloc port structure */ s = devm_kzalloc(dev, struct_size(s, p, devtype->nr_uart), GFP_KERNEL); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index ba31e97d3d96..87f7127b57e6 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -759,8 +759,6 @@ static int uart_get_info(struct tty_port *port, struct serial_struct *retinfo) struct uart_port *uport; int ret = -ENODEV; - memset(retinfo, 0, sizeof(*retinfo)); - /* * Ensure the state we copy is consistent and no hardware changes * occur as we go @@ -1305,7 +1303,7 @@ static int uart_set_rs485_config(struct uart_port *port, unsigned long flags; if (!port->rs485_config) - return -ENOIOCTLCMD; + return -ENOTTY; if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user))) return -EFAULT; @@ -1329,7 +1327,7 @@ static int uart_get_iso7816_config(struct uart_port *port, struct serial_iso7816 aux; if (!port->iso7816_config) - return -ENOIOCTLCMD; + return -ENOTTY; spin_lock_irqsave(&port->lock, flags); aux = port->iso7816; @@ -1349,7 +1347,7 @@ static int uart_set_iso7816_config(struct uart_port *port, unsigned long flags; if (!port->iso7816_config) - return -ENOIOCTLCMD; + return -ENOTTY; if (copy_from_user(&iso7816, iso7816_user, sizeof(*iso7816_user))) return -EFAULT; diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 7a07e7272de1..0a7e5b74bc1d 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -330,9 +330,9 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status) up->port.ignore_status_mask = next_ignore_status_mask; disr = sio_in(up, TXX9_SIDISR); } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); - spin_unlock(&up->port.lock); + tty_flip_buffer_push(&up->port.state->port); - spin_lock(&up->port.lock); + *status = disr; } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e1179e74a2b8..ef37fdf37612 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2124,7 +2124,7 @@ static void sci_break_ctl(struct uart_port *port, int break_state) unsigned short scscr, scsptr; unsigned long flags; - /* check wheter the port has SCSPTR */ + /* check whether the port has SCSPTR */ if (!sci_getreg(port, SCSPTR)->size) { /* * Not supported by hardware. Most parts couple break and rx @@ -2609,21 +2609,10 @@ done: udelay(DIV_ROUND_UP(10 * 1000000, baud)); } - /* - * Calculate delay for 2 DMA buffers (4 FIFO). - * See serial_core.c::uart_update_timeout(). - * With 10 bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above - * function calculates 1 jiffie for the data plus 5 jiffies for the - * "slop(e)." Then below we calculate 5 jiffies (20ms) for 2 DMA - * buffers (4 FIFO sizes), but when performing a faster transfer, the - * value obtained by this formula is too small. Therefore, if the value - * is smaller than 20ms, use 20ms as the timeout value for DMA. - */ + /* Calculate delay for 2 DMA buffers (4 FIFO). */ s->rx_frame = (10000 * bits) / (baud / 100); #ifdef CONFIG_SERIAL_SH_SCI_DMA s->rx_timeout = s->buf_len_rx * 2 * s->rx_frame; - if (s->rx_timeout < 20) - s->rx_timeout = 20; #endif if ((termios->c_cflag & CREAD) != 0) diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 328d5a78792f..0ac0371f943b 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -448,9 +448,7 @@ static void __ssp_receive_chars(struct sifive_serial_port *ssp) uart_insert_char(&ssp->port, 0, 0, ch, TTY_NORMAL); } - spin_unlock(&ssp->port.lock); tty_flip_buffer_push(&ssp->port.state->port); - spin_lock(&ssp->port.lock); } /** diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index b3675cf25a69..c2ae7b392b86 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -218,8 +218,7 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) u32 sr; char flag; - if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) - pm_wakeup_event(tport->tty->dev, 0); + spin_lock(&port->lock); while (stm32_usart_pending_rx(port, &sr, &stm32_port->last_res, threaded)) { @@ -271,14 +270,14 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) } } - if (uart_handle_sysrq_char(port, c)) + if (uart_prepare_sysrq_char(port, c)) continue; uart_insert_char(port, sr, USART_SR_ORE, c, flag); } - spin_unlock(&port->lock); + uart_unlock_and_check_sysrq(port); + tty_flip_buffer_push(tport); - spin_lock(&port->lock); } static void stm32_usart_tx_dma_complete(void *arg) @@ -286,12 +285,16 @@ static void stm32_usart_tx_dma_complete(void *arg) struct uart_port *port = arg; struct stm32_port *stm32port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32port->info->ofs; + unsigned long flags; + dmaengine_terminate_async(stm32port->tx_ch); stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); stm32port->tx_dma_busy = false; /* Let's see if we have pending data to send */ + spin_lock_irqsave(&port->lock, flags); stm32_usart_transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); } static void stm32_usart_tx_interrupt_enable(struct uart_port *port) @@ -303,7 +306,7 @@ static void stm32_usart_tx_interrupt_enable(struct uart_port *port) * Enables TX FIFO threashold irq when FIFO is enabled, * or TX empty irq when FIFO is disabled */ - if (stm32_port->fifoen) + if (stm32_port->fifoen && stm32_port->txftcfg >= 0) stm32_usart_set_bits(port, ofs->cr3, USART_CR3_TXFTIE); else stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TXEIE); @@ -314,7 +317,7 @@ static void stm32_usart_tx_interrupt_disable(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - if (stm32_port->fifoen) + if (stm32_port->fifoen && stm32_port->txftcfg >= 0) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_TXFTIE); else stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TXEIE); @@ -455,29 +458,34 @@ static void stm32_usart_transmit_chars(struct uart_port *port) static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; + struct tty_port *tport = &port->state->port; struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; u32 sr; - spin_lock(&port->lock); - sr = readl_relaxed(port->membase + ofs->isr); if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) writel_relaxed(USART_ICR_RTOCF, port->membase + ofs->icr); - if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) + if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) { + /* Clear wake up flag and disable wake up interrupt */ writel_relaxed(USART_ICR_WUCF, port->membase + ofs->icr); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); + if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) + pm_wakeup_event(tport->tty->dev, 0); + } if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch)) stm32_usart_receive_chars(port, false); - if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) + if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) { + spin_lock(&port->lock); stm32_usart_transmit_chars(port); - - spin_unlock(&port->lock); + spin_unlock(&port->lock); + } if (stm32_port->rx_ch) return IRQ_WAKE_THREAD; @@ -490,13 +498,9 @@ static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) struct uart_port *port = ptr; struct stm32_port *stm32_port = to_stm32_port(port); - spin_lock(&port->lock); - if (stm32_port->rx_ch) stm32_usart_receive_chars(port, true); - spin_unlock(&port->lock); - return IRQ_HANDLED; } @@ -505,7 +509,10 @@ static unsigned int stm32_usart_tx_empty(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - return readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE; + if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC) + return TIOCSER_TEMT; + + return 0; } static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) @@ -584,6 +591,19 @@ static void stm32_usart_start_tx(struct uart_port *port) stm32_usart_transmit_chars(port); } +/* Flush the transmit buffer. */ +static void stm32_usart_flush_buffer(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (stm32_port->tx_ch) { + dmaengine_terminate_async(stm32_port->tx_ch); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_port->tx_dma_busy = false; + } +} + /* Throttle the remote when input buffer is about to overflow. */ static void stm32_usart_throttle(struct uart_port *port) { @@ -634,33 +654,30 @@ static int stm32_usart_startup(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + const struct stm32_usart_config *cfg = &stm32_port->info->cfg; const char *name = to_platform_device(port->dev)->name; u32 val; int ret; ret = request_threaded_irq(port->irq, stm32_usart_interrupt, stm32_usart_threaded_interrupt, - IRQF_NO_SUSPEND, name, port); + IRQF_ONESHOT | IRQF_NO_SUSPEND, + name, port); if (ret) return ret; - /* RX FIFO Flush */ - if (ofs->rqr != UNDEF_REG) - stm32_usart_set_bits(port, ofs->rqr, USART_RQR_RXFRQ); - - /* Tx and RX FIFO configuration */ - if (stm32_port->fifoen) { - val = readl_relaxed(port->membase + ofs->cr3); - val &= ~(USART_CR3_TXFTCFG_MASK | USART_CR3_RXFTCFG_MASK); - val |= USART_CR3_TXFTCFG_HALF << USART_CR3_TXFTCFG_SHIFT; - val |= USART_CR3_RXFTCFG_HALF << USART_CR3_RXFTCFG_SHIFT; - writel_relaxed(val, port->membase + ofs->cr3); + if (stm32_port->swap) { + val = readl_relaxed(port->membase + ofs->cr2); + val |= USART_CR2_SWAP; + writel_relaxed(val, port->membase + ofs->cr2); } - /* RX FIFO enabling */ - val = stm32_port->cr1_irq | USART_CR1_RE; - if (stm32_port->fifoen) - val |= USART_CR1_FIFOEN; + /* RX FIFO Flush */ + if (ofs->rqr != UNDEF_REG) + writel_relaxed(USART_RQR_RXFRQ, port->membase + ofs->rqr); + + /* RX enabling */ + val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit); stm32_usart_set_bits(port, ofs->cr1, val); return 0; @@ -691,6 +708,11 @@ static void stm32_usart_shutdown(struct uart_port *port) if (ret) dev_err(port->dev, "Transmission is not complete\n"); + /* flush RX & TX FIFO */ + if (ofs->rqr != UNDEF_REG) + writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ, + port->membase + ofs->rqr); + stm32_usart_clr_bits(port, ofs->cr1, val); free_irq(port->irq, port); @@ -737,8 +759,9 @@ static void stm32_usart_set_termios(struct uart_port *port, unsigned int baud, bits; u32 usartdiv, mantissa, fraction, oversampling; tcflag_t cflag = termios->c_cflag; - u32 cr1, cr2, cr3; + u32 cr1, cr2, cr3, isr; unsigned long flags; + int ret; if (!stm32_port->hw_flow_control) cflag &= ~CRTSCTS; @@ -747,21 +770,37 @@ static void stm32_usart_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); + ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TC), + 10, 100000); + + /* Send the TC error message only when ISR_TC is not set. */ + if (ret) + dev_err(port->dev, "Transmission is not complete\n"); + /* Stop serial port and reset value */ writel_relaxed(0, port->membase + ofs->cr1); /* flush RX & TX FIFO */ if (ofs->rqr != UNDEF_REG) - stm32_usart_set_bits(port, ofs->rqr, - USART_RQR_TXFRQ | USART_RQR_RXFRQ); + writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ, + port->membase + ofs->rqr); cr1 = USART_CR1_TE | USART_CR1_RE; if (stm32_port->fifoen) cr1 |= USART_CR1_FIFOEN; - cr2 = 0; + cr2 = stm32_port->swap ? USART_CR2_SWAP : 0; + + /* Tx and RX FIFO configuration */ cr3 = readl_relaxed(port->membase + ofs->cr3); - cr3 &= USART_CR3_TXFTIE | USART_CR3_RXFTCFG_MASK | USART_CR3_RXFTIE - | USART_CR3_TXFTCFG_MASK; + cr3 &= USART_CR3_TXFTIE | USART_CR3_RXFTIE; + if (stm32_port->fifoen) { + if (stm32_port->txftcfg >= 0) + cr3 |= stm32_port->txftcfg << USART_CR3_TXFTCFG_SHIFT; + if (stm32_port->rxftcfg >= 0) + cr3 |= stm32_port->rxftcfg << USART_CR3_RXFTCFG_SHIFT; + } if (cflag & CSTOPB) cr2 |= USART_CR2_STOP_2B; @@ -790,7 +829,8 @@ static void stm32_usart_set_termios(struct uart_port *port, , bits); if (ofs->rtor != UNDEF_REG && (stm32_port->rx_ch || - stm32_port->fifoen)) { + (stm32_port->fifoen && + stm32_port->rxftcfg >= 0))) { if (cflag & CSTOPB) bits = bits + 3; /* 1 start bit + 2 stop bits */ else @@ -817,12 +857,6 @@ static void stm32_usart_set_termios(struct uart_port *port, cr3 |= USART_CR3_CTSE | USART_CR3_RTSE; } - /* Handle modem control interrupts */ - if (UART_ENABLE_MS(port, termios->c_cflag)) - stm32_usart_enable_ms(port); - else - stm32_usart_disable_ms(port); - usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud); /* @@ -892,12 +926,24 @@ static void stm32_usart_set_termios(struct uart_port *port, cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); } + /* Configure wake up from low power on start bit detection */ + if (stm32_port->wakeup_src) { + cr3 &= ~USART_CR3_WUS_MASK; + cr3 |= USART_CR3_WUS_START_BIT; + } + writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr2, port->membase + ofs->cr2); writel_relaxed(cr1, port->membase + ofs->cr1); stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); spin_unlock_irqrestore(&port->lock, flags); + + /* Handle modem control interrupts */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + stm32_usart_enable_ms(port); + else + stm32_usart_disable_ms(port); } static const char *stm32_usart_type(struct uart_port *port) @@ -962,6 +1008,7 @@ static const struct uart_ops stm32_uart_ops = { .break_ctl = stm32_usart_break_ctl, .startup = stm32_usart_startup, .shutdown = stm32_usart_shutdown, + .flush_buffer = stm32_usart_flush_buffer, .set_termios = stm32_usart_set_termios, .pm = stm32_usart_pm, .type = stm32_usart_type, @@ -971,6 +1018,39 @@ static const struct uart_ops stm32_uart_ops = { .verify_port = stm32_usart_verify_port, }; +/* + * STM32H7 RX & TX FIFO threshold configuration (CR3 RXFTCFG / TXFTCFG) + * Note: 1 isn't a valid value in RXFTCFG / TXFTCFG. In this case, + * RXNEIE / TXEIE can be used instead of threshold irqs: RXFTIE / TXFTIE. + * So, RXFTCFG / TXFTCFG bitfields values are encoded as array index + 1. + */ +static const u32 stm32h7_usart_fifo_thresh_cfg[] = { 1, 2, 4, 8, 12, 14, 16 }; + +static void stm32_usart_get_ftcfg(struct platform_device *pdev, const char *p, + int *ftcfg) +{ + u32 bytes, i; + + /* DT option to get RX & TX FIFO threshold (default to 8 bytes) */ + if (of_property_read_u32(pdev->dev.of_node, p, &bytes)) + bytes = 8; + + for (i = 0; i < ARRAY_SIZE(stm32h7_usart_fifo_thresh_cfg); i++) + if (stm32h7_usart_fifo_thresh_cfg[i] >= bytes) + break; + if (i >= ARRAY_SIZE(stm32h7_usart_fifo_thresh_cfg)) + i = ARRAY_SIZE(stm32h7_usart_fifo_thresh_cfg) - 1; + + dev_dbg(&pdev->dev, "%s set to %d bytes\n", p, + stm32h7_usart_fifo_thresh_cfg[i]); + + /* Provide FIFO threshold ftcfg (1 is invalid: threshold irq unused) */ + if (i) + *ftcfg = i - 1; + else + *ftcfg = -EINVAL; +} + static void stm32_usart_deinit_port(struct stm32_port *stm32port) { clk_disable_unprepare(stm32port->clk); @@ -1000,13 +1080,19 @@ static int stm32_usart_init_port(struct stm32_port *stm32port, if (ret) return ret; - if (stm32port->info->cfg.has_wakeup) { - stm32port->wakeirq = platform_get_irq_optional(pdev, 1); - if (stm32port->wakeirq <= 0 && stm32port->wakeirq != -ENXIO) - return stm32port->wakeirq ? : -ENODEV; - } + stm32port->wakeup_src = stm32port->info->cfg.has_wakeup && + of_property_read_bool(pdev->dev.of_node, "wakeup-source"); + + stm32port->swap = stm32port->info->cfg.has_swap && + of_property_read_bool(pdev->dev.of_node, "rx-tx-swap"); stm32port->fifoen = stm32port->info->cfg.has_fifo; + if (stm32port->fifoen) { + stm32_usart_get_ftcfg(pdev, "rx-threshold", + &stm32port->rxftcfg); + stm32_usart_get_ftcfg(pdev, "tx-threshold", + &stm32port->txftcfg); + } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); port->membase = devm_ioremap_resource(&pdev->dev, res); @@ -1106,6 +1192,13 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, struct dma_async_tx_descriptor *desc = NULL; int ret; + /* + * Using DMA and threaded handler for the console could lead to + * deadlocks. + */ + if (uart_console(port)) + return -ENODEV; + /* Request DMA RX channel */ stm32port->rx_ch = dma_request_slave_channel(dev, "rx"); if (!stm32port->rx_ch) { @@ -1239,23 +1332,13 @@ static int stm32_usart_serial_probe(struct platform_device *pdev) if (ret) return ret; - if (stm32port->wakeirq > 0) { - ret = device_init_wakeup(&pdev->dev, true); - if (ret) - goto err_uninit; - - ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, - stm32port->wakeirq); + if (stm32port->wakeup_src) { + device_set_wakeup_capable(&pdev->dev, true); + ret = dev_pm_set_wake_irq(&pdev->dev, stm32port->port.irq); if (ret) goto err_nowup; - - device_set_wakeup_enable(&pdev->dev, false); } - ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port); - if (ret) - goto err_wirq; - ret = stm32_usart_of_dma_rx_probe(stm32port, pdev); if (ret) dev_info(&pdev->dev, "interrupt mode used for rx (no dma)\n"); @@ -1269,19 +1352,47 @@ static int stm32_usart_serial_probe(struct platform_device *pdev) pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); + + ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port); + if (ret) + goto err_port; + pm_runtime_put_sync(&pdev->dev); return 0; -err_wirq: - if (stm32port->wakeirq > 0) +err_port: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + if (stm32port->rx_ch) { + dmaengine_terminate_async(stm32port->rx_ch); + dma_release_channel(stm32port->rx_ch); + } + + if (stm32port->rx_dma_buf) + dma_free_coherent(&pdev->dev, + RX_BUF_L, stm32port->rx_buf, + stm32port->rx_dma_buf); + + if (stm32port->tx_ch) { + dmaengine_terminate_async(stm32port->tx_ch); + dma_release_channel(stm32port->tx_ch); + } + + if (stm32port->tx_dma_buf) + dma_free_coherent(&pdev->dev, + TX_BUF_L, stm32port->tx_buf, + stm32port->tx_dma_buf); + + if (stm32port->wakeup_src) dev_pm_clear_wake_irq(&pdev->dev); err_nowup: - if (stm32port->wakeirq > 0) - device_init_wakeup(&pdev->dev, false); + if (stm32port->wakeup_src) + device_set_wakeup_capable(&pdev->dev, false); -err_uninit: stm32_usart_deinit_port(stm32port); return ret; @@ -1295,11 +1406,20 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) int err; pm_runtime_get_sync(&pdev->dev); + err = uart_remove_one_port(&stm32_usart_driver, port); + if (err) + return(err); + + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); - if (stm32_port->rx_ch) + if (stm32_port->rx_ch) { + dmaengine_terminate_async(stm32_port->rx_ch); dma_release_channel(stm32_port->rx_ch); + } if (stm32_port->rx_dma_buf) dma_free_coherent(&pdev->dev, @@ -1308,27 +1428,24 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); - if (stm32_port->tx_ch) + if (stm32_port->tx_ch) { + dmaengine_terminate_async(stm32_port->tx_ch); dma_release_channel(stm32_port->tx_ch); + } if (stm32_port->tx_dma_buf) dma_free_coherent(&pdev->dev, TX_BUF_L, stm32_port->tx_buf, stm32_port->tx_dma_buf); - if (stm32_port->wakeirq > 0) { + if (stm32_port->wakeup_src) { dev_pm_clear_wake_irq(&pdev->dev); device_init_wakeup(&pdev->dev, false); } stm32_usart_deinit_port(stm32_port); - err = uart_remove_one_port(&stm32_usart_driver, port); - - pm_runtime_disable(&pdev->dev); - pm_runtime_put_noidle(&pdev->dev); - - return err; + return 0; } #ifdef CONFIG_SERIAL_STM32_CONSOLE @@ -1354,13 +1471,10 @@ static void stm32_usart_console_write(struct console *co, const char *s, u32 old_cr1, new_cr1; int locked = 1; - local_irq_save(flags); - if (port->sysrq) - locked = 0; - else if (oops_in_progress) - locked = spin_trylock(&port->lock); + if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); else - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); /* Save and disable interrupts, enable the transmitter */ old_cr1 = readl_relaxed(port->membase + ofs->cr1); @@ -1374,8 +1488,7 @@ static void stm32_usart_console_write(struct console *co, const char *s, writel_relaxed(old_cr1, port->membase + ofs->cr1); if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); + spin_unlock_irqrestore(&port->lock, flags); } static int stm32_usart_console_setup(struct console *co, char *options) @@ -1436,23 +1549,20 @@ static void __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - const struct stm32_usart_config *cfg = &stm32_port->info->cfg; - u32 val; - if (stm32_port->wakeirq <= 0) + if (!stm32_port->wakeup_src) return; + /* + * Enable low-power wake-up and wake-up irq if argument is set to + * "enable", disable low-power wake-up and wake-up irq otherwise + */ if (enable) { - stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); stm32_usart_set_bits(port, ofs->cr1, USART_CR1_UESM); - val = readl_relaxed(port->membase + ofs->cr3); - val &= ~USART_CR3_WUS_MASK; - /* Enable Wake up interrupt from low power on start bit */ - val |= USART_CR3_WUS_START_BIT | USART_CR3_WUFIE; - writel_relaxed(val, port->membase + ofs->cr3); - stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_WUFIE); } else { stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_UESM); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); } } @@ -1462,10 +1572,8 @@ static int __maybe_unused stm32_usart_serial_suspend(struct device *dev) uart_suspend_port(&stm32_usart_driver, port); - if (device_may_wakeup(dev)) + if (device_may_wakeup(dev) || device_wakeup_path(dev)) stm32_usart_serial_en_wakeup(port, true); - else - stm32_usart_serial_en_wakeup(port, false); /* * When "no_console_suspend" is enabled, keep the pinctrl default state @@ -1474,7 +1582,7 @@ static int __maybe_unused stm32_usart_serial_suspend(struct device *dev) * capabilities. */ if (console_suspend_enabled || !uart_console(port)) { - if (device_may_wakeup(dev)) + if (device_may_wakeup(dev) || device_wakeup_path(dev)) pinctrl_pm_select_idle_state(dev); else pinctrl_pm_select_sleep_state(dev); @@ -1489,7 +1597,7 @@ static int __maybe_unused stm32_usart_serial_resume(struct device *dev) pinctrl_pm_select_default_state(dev); - if (device_may_wakeup(dev)) + if (device_may_wakeup(dev) || device_wakeup_path(dev)) stm32_usart_serial_en_wakeup(port, false); return uart_resume_port(&stm32_usart_driver, port); diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index cb4f327c46db..07ac291328cd 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -25,6 +25,7 @@ struct stm32_usart_offsets { struct stm32_usart_config { u8 uart_enable_bit; /* USART_CR1_UE */ bool has_7bits_data; + bool has_swap; bool has_wakeup; bool has_fifo; int fifosize; @@ -76,6 +77,7 @@ struct stm32_usart_info stm32f7_info = { .cfg = { .uart_enable_bit = 0, .has_7bits_data = true, + .has_swap = true, .fifosize = 1, } }; @@ -97,6 +99,7 @@ struct stm32_usart_info stm32h7_info = { .cfg = { .uart_enable_bit = 0, .has_7bits_data = true, + .has_swap = true, .has_wakeup = true, .has_fifo = true, .fifosize = 16, @@ -127,9 +130,6 @@ struct stm32_usart_info stm32h7_info = { /* Dummy bits */ #define USART_SR_DUMMY_RX BIT(16) -/* USART_ICR (F7) */ -#define USART_CR_TC BIT(6) - /* USART_DR */ #define USART_DR_MASK GENMASK(8, 0) @@ -216,12 +216,6 @@ struct stm32_usart_info stm32h7_info = { #define USART_CR3_TXFTCFG_MASK GENMASK(31, 29) /* H7 */ #define USART_CR3_TXFTCFG_SHIFT 29 /* H7 */ -/* TX FIFO threashold set to half of its depth */ -#define USART_CR3_TXFTCFG_HALF 0x2 - -/* RX FIFO threashold set to half of its depth */ -#define USART_CR3_RXFTCFG_HALF 0x2 - /* USART_GTPR */ #define USART_GTPR_PSC_MASK GENMASK(7, 0) #define USART_GTPR_GT_MASK GENMASK(15, 8) @@ -271,8 +265,11 @@ struct stm32_port { int last_res; bool tx_dma_busy; /* dma tx busy */ bool hw_flow_control; + bool swap; /* swap RX & TX pins */ bool fifoen; - int wakeirq; + int rxftcfg; /* RX FIFO threshold CFG */ + int txftcfg; /* TX FIFO threshold CFG */ + bool wakeup_src; int rdr_mask; /* receive data register mask */ struct mctrl_gpios *gpios; /* modem control gpios */ }; diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 319e5ceb6130..12c2468f2b0e 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -466,12 +466,8 @@ static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) if (status & UART_LSR_THRE) transmit_chars(up); - spin_unlock_irqrestore(&up->port.lock, flags); - tty_flip_buffer_push(&up->port.state->port); - spin_lock_irqsave(&up->port.lock, flags); - } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); spin_unlock_irqrestore(&up->port.lock, flags); diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index aaf8748a6147..52687c65ad74 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -282,6 +282,7 @@ static const struct of_device_id tegra_tcu_match[] = { { .compatible = "nvidia,tegra194-tcu" }, { } }; +MODULE_DEVICE_TABLE(of, tegra_tcu_match); static struct platform_driver tegra_tcu_driver = { .driver = { diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 2126e6e6dfd1..08941eabe7b1 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -87,9 +87,7 @@ static void timbuart_rx_chars(struct uart_port *port) tty_insert_flip_char(tport, ch, TTY_NORMAL); } - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); dev_dbg(port->dev, "%s - total read %d bytes\n", __func__, port->icount.rx); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 764e992438b2..c5edd56ff830 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -184,9 +184,7 @@ static void handle_rx(struct uart_port *port) tty_insert_flip_char(tport, c, flag); } - spin_unlock(&port->lock); tty_flip_buffer_push(tport); - spin_lock(&port->lock); } static void handle_tx(struct uart_port *port) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index a14c5d996473..67a2db621e2b 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -301,9 +301,8 @@ static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus) tty_insert_flip_char(&port->state->port, data, status); isrstatus = 0; } - spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } /** diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 644173786bf0..5523cf7bd1c2 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -137,37 +137,14 @@ MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); */ static struct tty_driver *serial_driver; -static int open(struct tty_struct *tty, struct file * filp); -static void close(struct tty_struct *tty, struct file * filp); -static void hangup(struct tty_struct *tty); -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); - -static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static int put_char(struct tty_struct *tty, unsigned char ch); -static void send_xchar(struct tty_struct *tty, char ch); static void wait_until_sent(struct tty_struct *tty, int timeout); -static int write_room(struct tty_struct *tty); -static void flush_chars(struct tty_struct *tty); static void flush_buffer(struct tty_struct *tty); -static void tx_hold(struct tty_struct *tty); static void tx_release(struct tty_struct *tty); -static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int chars_in_buffer(struct tty_struct *tty); -static void throttle(struct tty_struct * tty); -static void unthrottle(struct tty_struct * tty); -static int set_break(struct tty_struct *tty, int break_state); - /* - * generic HDLC support and callbacks + * generic HDLC support */ -#if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(struct slgt_info *info); -static void hdlcdev_rx(struct slgt_info *info, char *buf, int size); -static int hdlcdev_init(struct slgt_info *info); -static void hdlcdev_exit(struct slgt_info *info); -#endif /* @@ -186,9 +163,6 @@ struct cond_wait { wait_queue_entry_t wait; unsigned int data; }; -static void init_cond_wait(struct cond_wait *w, unsigned int data); -static void add_cond_wait(struct cond_wait **head, struct cond_wait *w); -static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w); static void flush_cond_wait(struct cond_wait **head); /* @@ -443,12 +417,8 @@ static void shutdown(struct slgt_info *info); static void program_hw(struct slgt_info *info); static void change_params(struct slgt_info *info); -static int register_test(struct slgt_info *info); -static int irq_test(struct slgt_info *info); -static int loopback_test(struct slgt_info *info); static int adapter_test(struct slgt_info *info); -static void reset_adapter(struct slgt_info *info); static void reset_port(struct slgt_info *info); static void async_mode(struct slgt_info *info); static void sync_mode(struct slgt_info *info); @@ -457,14 +427,12 @@ static void rx_stop(struct slgt_info *info); static void rx_start(struct slgt_info *info); static void reset_rbufs(struct slgt_info *info); static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); -static void rdma_reset(struct slgt_info *info); static bool rx_get_frame(struct slgt_info *info); static bool rx_get_buf(struct slgt_info *info); static void tx_start(struct slgt_info *info); static void tx_stop(struct slgt_info *info); static void tx_set_idle(struct slgt_info *info); -static unsigned int free_tbuf_count(struct slgt_info *info); static unsigned int tbuf_bytes(struct slgt_info *info); static void reset_tbufs(struct slgt_info *info); static void tdma_reset(struct slgt_info *info); @@ -472,26 +440,10 @@ static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count) static void get_signals(struct slgt_info *info); static void set_signals(struct slgt_info *info); -static void enable_loopback(struct slgt_info *info); static void set_rate(struct slgt_info *info, u32 data_rate); -static int bh_action(struct slgt_info *info); -static void bh_handler(struct work_struct *work); static void bh_transmit(struct slgt_info *info); -static void isr_serial(struct slgt_info *info); -static void isr_rdma(struct slgt_info *info); static void isr_txeom(struct slgt_info *info, unsigned short status); -static void isr_tdma(struct slgt_info *info); - -static int alloc_dma_bufs(struct slgt_info *info); -static void free_dma_bufs(struct slgt_info *info); -static int alloc_desc(struct slgt_info *info); -static void free_desc(struct slgt_info *info); -static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); -static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); - -static int alloc_tmp_rbuf(struct slgt_info *info); -static void free_tmp_rbuf(struct slgt_info *info); static void tx_timeout(struct timer_list *t); static void rx_timeout(struct timer_list *t); @@ -509,10 +461,6 @@ static int tx_abort(struct slgt_info *info); static int rx_enable(struct slgt_info *info, int enable); static int modem_input_wait(struct slgt_info *info,int arg); static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int set_break(struct tty_struct *tty, int break_state); static int get_interface(struct slgt_info *info, int __user *if_mode); static int set_interface(struct slgt_info *info, int if_mode); static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); @@ -526,9 +474,6 @@ static int set_xctrl(struct slgt_info *info, int if_mode); /* * driver functions */ -static void add_device(struct slgt_info *info); -static void device_init(int adapter_num, struct pci_dev *pdev); -static int claim_resources(struct slgt_info *info); static void release_resources(struct slgt_info *info); /* @@ -3566,8 +3511,6 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev info->max_frame_size = 4096; info->base_clock = 14745600; info->rbuf_fill_level = DMABUFSIZE; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; init_waitqueue_head(&info->status_event_wait_q); init_waitqueue_head(&info->event_wait_q); spin_lock_init(&info->netlock); @@ -3705,7 +3648,6 @@ static const struct tty_operations ops = { static void slgt_cleanup(void) { - int rc; struct slgt_info *info; struct slgt_info *tmp; @@ -3714,9 +3656,7 @@ static void slgt_cleanup(void) if (serial_driver) { for (info=slgt_device_list ; info != NULL ; info=info->next_device) tty_unregister_device(serial_driver, info->line); - rc = tty_unregister_driver(serial_driver); - if (rc) - DBGERR(("tty_unregister_driver error=%d\n", rc)); + tty_unregister_driver(serial_driver); put_tty_driver(serial_driver); } @@ -5018,7 +4958,7 @@ static int loopback_test(struct slgt_info *info) #define TESTFRAMESIZE 20 unsigned long timeout; - u16 count = TESTFRAMESIZE; + u16 count; unsigned char buf[TESTFRAMESIZE]; int rc = -ENODEV; unsigned long flags; diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 959f9e121cc6..6628792431dc 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -118,6 +118,7 @@ static const struct sysrq_key_op sysrq_loglevel_op = { static void sysrq_handle_SAK(int key) { struct work_struct *SAK_work = &vc_cons[fg_console].SAK_work; + schedule_work(SAK_work); } static const struct sysrq_key_op sysrq_SAK_op = { @@ -547,22 +548,22 @@ static int sysrq_key_table_key2index(int key) */ static const struct sysrq_key_op *__sysrq_get_key_op(int key) { - const struct sysrq_key_op *op_p = NULL; - int i; + const struct sysrq_key_op *op_p = NULL; + int i; i = sysrq_key_table_key2index(key); if (i != -1) - op_p = sysrq_key_table[i]; + op_p = sysrq_key_table[i]; - return op_p; + return op_p; } static void __sysrq_put_key_op(int key, const struct sysrq_key_op *op_p) { - int i = sysrq_key_table_key2index(key); + int i = sysrq_key_table_key2index(key); - if (i != -1) - sysrq_key_table[i] = op_p; + if (i != -1) + sysrq_key_table[i] = op_p; } void __handle_sysrq(int key, bool check_mask) @@ -586,8 +587,8 @@ void __handle_sysrq(int key, bool check_mask) orig_log_level = console_loglevel; console_loglevel = CONSOLE_LOGLEVEL_DEFAULT; - op_p = __sysrq_get_key_op(key); - if (op_p) { + op_p = __sysrq_get_key_op(key); + if (op_p) { /* * Should we check for enabled operations (/proc/sysrq-trigger * should not) and is the invoked operation enabled? @@ -636,13 +637,13 @@ static int sysrq_reset_downtime_ms; /* Simple translation table for the SysRq keys */ static const unsigned char sysrq_xlate[KEY_CNT] = - "\000\0331234567890-=\177\t" /* 0x00 - 0x0f */ - "qwertyuiop[]\r\000as" /* 0x10 - 0x1f */ - "dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */ - "bnm,./\000*\000 \000\201\202\203\204\205" /* 0x30 - 0x3f */ - "\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */ - "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */ - "\r\000/"; /* 0x60 - 0x6f */ + "\000\0331234567890-=\177\t" /* 0x00 - 0x0f */ + "qwertyuiop[]\r\000as" /* 0x10 - 0x1f */ + "dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */ + "bnm,./\000*\000 \000\201\202\203\204\205" /* 0x30 - 0x3f */ + "\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */ + "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */ + "\r\000/"; /* 0x60 - 0x6f */ struct sysrq_state { struct input_handle handle; @@ -1107,7 +1108,7 @@ int sysrq_toggle_support(int enable_mask) EXPORT_SYMBOL_GPL(sysrq_toggle_support); static int __sysrq_swap_key_ops(int key, const struct sysrq_key_op *insert_op_p, - const struct sysrq_key_op *remove_op_p) + const struct sysrq_key_op *remove_op_p) { int retval; diff --git a/drivers/tty/tty.h b/drivers/tty/tty.h new file mode 100644 index 000000000000..b710c5ef89ab --- /dev/null +++ b/drivers/tty/tty.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * TTY core internal functions + */ + +#ifndef _TTY_INTERNAL_H +#define _TTY_INTERNAL_H + +#define tty_msg(fn, tty, f, ...) \ + fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) + +#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__) +#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) +#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) +#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__) + +#define tty_info_ratelimited(tty, f, ...) \ + tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__) + +/* + * Lock subclasses for tty locks + * + * TTY_LOCK_NORMAL is for normal ttys and master ptys. + * TTY_LOCK_SLAVE is for slave ptys only. + * + * Lock subclasses are necessary for handling nested locking with pty pairs. + * tty locks which use nested locking: + * + * legacy_mutex - Nested tty locks are necessary for releasing pty pairs. + * The stable lock order is master pty first, then slave pty. + * termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem. + * Subclassing this lock enables the slave pty to hold its + * termios_rwsem when claiming the master tty_buffer lock. + * tty_buffer lock - slave ptys can claim nested buffer lock when handling + * signal chars. The stable lock order is slave pty, then + * master. + */ +enum { + TTY_LOCK_NORMAL = 0, + TTY_LOCK_SLAVE, +}; + +/* Values for tty->flow_change */ +#define TTY_THROTTLE_SAFE 1 +#define TTY_UNTHROTTLE_SAFE 2 + +static inline void __tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; +} + +static inline void tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; + smp_mb(); +} + +int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout); +void tty_ldisc_unlock(struct tty_struct *tty); + +int __tty_check_change(struct tty_struct *tty, int sig); +int tty_check_change(struct tty_struct *tty); +void __stop_tty(struct tty_struct *tty); +void __start_tty(struct tty_struct *tty); +void tty_vhangup_session(struct tty_struct *tty); +void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty); +int tty_signal_session_leader(struct tty_struct *tty, int exit_session); +void session_clear_tty(struct pid *session); +void tty_buffer_free_all(struct tty_port *port); +void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); +void tty_buffer_init(struct tty_port *port); +void tty_buffer_set_lock_subclass(struct tty_port *port); +bool tty_buffer_restart_work(struct tty_port *port); +bool tty_buffer_cancel_work(struct tty_port *port); +void tty_buffer_flush_work(struct tty_port *port); +speed_t tty_termios_input_baud_rate(struct ktermios *termios); +void tty_ldisc_hangup(struct tty_struct *tty, bool reset); +int tty_ldisc_reinit(struct tty_struct *tty, int disc); +long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, + struct file *file, unsigned int cmd, unsigned long arg); +void tty_default_fops(struct file_operations *fops); +struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx); +int tty_alloc_file(struct file *file); +void tty_add_file(struct tty_struct *tty, struct file *file); +void tty_free_file(struct file *file); +int tty_release(struct inode *inode, struct file *filp); + +#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock)) + +int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty); +void tty_ldisc_release(struct tty_struct *tty); +int __must_check tty_ldisc_init(struct tty_struct *tty); +void tty_ldisc_deinit(struct tty_struct *tty); + +void tty_sysctl_init(void); + +/* tty_audit.c */ +#ifdef CONFIG_AUDIT +void tty_audit_add_data(struct tty_struct *tty, const void *data, size_t size); +void tty_audit_tiocsti(struct tty_struct *tty, char ch); +#else +static inline void tty_audit_add_data(struct tty_struct *tty, const void *data, + size_t size) +{ +} +static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch) +{ +} +#endif + +ssize_t redirected_tty_write(struct kiocb *, struct iov_iter *); + +#endif diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c index 32898aabcd06..ca7afd7b2716 100644 --- a/drivers/tty/tty_audit.c +++ b/drivers/tty/tty_audit.c @@ -10,6 +10,7 @@ #include #include #include +#include "tty.h" struct tty_audit_buf { struct mutex mutex; /* Protects all data below */ diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 6551b188b736..48b5de659c77 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -8,6 +8,7 @@ #include #include #include +#include "tty.h" /* diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 6d4995a5f318..9733469a14b2 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -17,7 +17,7 @@ #include #include #include - +#include "tty.h" #define MIN_TTYB_SIZE 256 #define TTYB_ALIGN_MASK 255 diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 391bada4cedb..5b5e99604989 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -108,6 +108,7 @@ #include #include +#include "tty.h" #undef TTY_DEBUG_HANGUP #ifdef TTY_DEBUG_HANGUP @@ -546,7 +547,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * This is available to the pty code so if the master closes, if the * slave is a redirect it can release the redirect. */ -struct file *tty_release_redirect(struct tty_struct *tty) +static struct file *tty_release_redirect(struct tty_struct *tty) { struct file *f = NULL; @@ -559,7 +560,6 @@ struct file *tty_release_redirect(struct tty_struct *tty) return f; } -EXPORT_SYMBOL_GPL(tty_release_redirect); /** * __tty_hangup - actual handler for hangup events @@ -1195,8 +1195,6 @@ int tty_send_xchar(struct tty_struct *tty, char ch) return 0; } -static char ptychar[] = "pqrstuvwxyzabcde"; - /** * pty_line_name - generate name for a pty * @driver: the tty driver in use @@ -1210,6 +1208,7 @@ static char ptychar[] = "pqrstuvwxyzabcde"; */ static void pty_line_name(struct tty_driver *driver, int index, char *p) { + static const char ptychar[] = "pqrstuvwxyzabcde"; int i = index + driver->name_base; /* ->name is initialized to "ttyp", but "tty" is expected */ sprintf(p, "%s%c%x", @@ -2530,14 +2529,14 @@ out: * @p: pointer to result * * Obtain the modem status bits from the tty driver if the feature - * is supported. Return -EINVAL if it is not available. + * is supported. Return -ENOTTY if it is not available. * * Locking: none (up to the driver) */ static int tty_tiocmget(struct tty_struct *tty, int __user *p) { - int retval = -EINVAL; + int retval = -ENOTTY; if (tty->ops->tiocmget) { retval = tty->ops->tiocmget(tty); @@ -2555,7 +2554,7 @@ static int tty_tiocmget(struct tty_struct *tty, int __user *p) * @p: pointer to desired bits * * Set the modem status bits from the tty driver if the feature - * is supported. Return -EINVAL if it is not available. + * is supported. Return -ENOTTY if it is not available. * * Locking: none (up to the driver) */ @@ -2567,7 +2566,7 @@ static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd, unsigned int set, clear, val; if (tty->ops->tiocmset == NULL) - return -EINVAL; + return -ENOTTY; retval = get_user(val, p); if (retval) @@ -2607,7 +2606,7 @@ int tty_get_icount(struct tty_struct *tty, if (tty->ops->get_icount) return tty->ops->get_icount(tty, icount); else - return -EINVAL; + return -ENOTTY; } EXPORT_SYMBOL_GPL(tty_get_icount); @@ -2625,26 +2624,31 @@ static int tty_tiocgicount(struct tty_struct *tty, void __user *arg) return 0; } +static int tty_set_serial(struct tty_struct *tty, struct serial_struct *ss) +{ + char comm[TASK_COMM_LEN]; + int flags; + + flags = ss->flags & ASYNC_DEPRECATED; + + if (flags) + pr_warn_ratelimited("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", + __func__, get_task_comm(comm, current), flags); + + if (!tty->ops->set_serial) + return -ENOTTY; + + return tty->ops->set_serial(tty, ss); +} + static int tty_tiocsserial(struct tty_struct *tty, struct serial_struct __user *ss) { - static DEFINE_RATELIMIT_STATE(depr_flags, - DEFAULT_RATELIMIT_INTERVAL, - DEFAULT_RATELIMIT_BURST); - char comm[TASK_COMM_LEN]; struct serial_struct v; - int flags; if (copy_from_user(&v, ss, sizeof(*ss))) return -EFAULT; - flags = v.flags & ASYNC_DEPRECATED; - - if (flags && __ratelimit(&depr_flags)) - pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", - __func__, get_task_comm(comm, current), flags); - if (!tty->ops->set_serial) - return -ENOTTY; - return tty->ops->set_serial(tty, &v); + return tty_set_serial(tty, &v); } static int tty_tiocgserial(struct tty_struct *tty, struct serial_struct __user *ss) @@ -2842,13 +2846,8 @@ struct serial_struct32 { static int compat_tty_tiocsserial(struct tty_struct *tty, struct serial_struct32 __user *ss) { - static DEFINE_RATELIMIT_STATE(depr_flags, - DEFAULT_RATELIMIT_INTERVAL, - DEFAULT_RATELIMIT_BURST); - char comm[TASK_COMM_LEN]; struct serial_struct32 v32; struct serial_struct v; - int flags; if (copy_from_user(&v32, ss, sizeof(*ss))) return -EFAULT; @@ -2859,14 +2858,7 @@ static int compat_tty_tiocsserial(struct tty_struct *tty, v.port_high = v32.port_high; v.iomap_base = 0; - flags = v.flags & ASYNC_DEPRECATED; - - if (flags && __ratelimit(&depr_flags)) - pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", - __func__, get_task_comm(comm, current), flags); - if (!tty->ops->set_serial) - return -ENOTTY; - return tty->ops->set_serial(tty, &v); + return tty_set_serial(tty, &v); } static int compat_tty_tiocgserial(struct tty_struct *tty, @@ -3524,21 +3516,14 @@ EXPORT_SYMBOL(tty_register_driver); /* * Called by a tty driver to unregister itself. */ -int tty_unregister_driver(struct tty_driver *driver) +void tty_unregister_driver(struct tty_driver *driver) { -#if 0 - /* FIXME */ - if (driver->refcount) - return -EBUSY; -#endif unregister_chrdev_region(MKDEV(driver->major, driver->minor_start), driver->num); mutex_lock(&tty_mutex); list_del(&driver->tty_drivers); mutex_unlock(&tty_mutex); - return 0; } - EXPORT_SYMBOL(tty_unregister_driver); dev_t tty_devnum(struct tty_struct *tty) diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 4de1c6ddb8ff..41f7449d0464 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -21,6 +21,7 @@ #include #include #include +#include "tty.h" #include #include @@ -57,8 +58,7 @@ int tty_chars_in_buffer(struct tty_struct *tty) { if (tty->ops->chars_in_buffer) return tty->ops->chars_in_buffer(tty); - else - return 0; + return 0; } EXPORT_SYMBOL(tty_chars_in_buffer); @@ -774,8 +774,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, case TCSETX: case TCSETXW: case TCSETXF: - return -EINVAL; -#endif + return -ENOTTY; +#endif case TIOCGSOFTCAR: copy_termios(real_tty, &kterm); ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0, diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c index 4b751b9285ad..7813dc910a19 100644 --- a/drivers/tty/tty_jobctrl.c +++ b/drivers/tty/tty_jobctrl.c @@ -11,6 +11,7 @@ #include #include #include +#include "tty.h" static int is_ignored(int sig) { @@ -75,6 +76,7 @@ void proc_clear_tty(struct task_struct *p) { unsigned long flags; struct tty_struct *tty; + spin_lock_irqsave(&p->sighand->siglock, flags); tty = p->signal->tty; p->signal->tty = NULL; @@ -173,6 +175,7 @@ EXPORT_SYMBOL_GPL(get_current_tty); void session_clear_tty(struct pid *session) { struct task_struct *p; + do_each_pid_task(session, PIDTYPE_SID, p) { proc_clear_tty(p); } while_each_pid_task(session, PIDTYPE_SID, p); @@ -202,8 +205,10 @@ int tty_signal_session_leader(struct tty_struct *tty, int exit_session) spin_lock_irq(&p->sighand->siglock); if (p->signal->tty == tty) { p->signal->tty = NULL; - /* We defer the dereferences outside fo - the tasklist lock */ + /* + * We defer the dereferences outside of + * the tasklist lock. + */ refs++; } if (!p->signal->leader) { @@ -240,10 +245,10 @@ int tty_signal_session_leader(struct tty_struct *tty, int exit_session) * it wants to disassociate itself from its controlling tty. * * It performs the following functions: - * (1) Sends a SIGHUP and SIGCONT to the foreground process group - * (2) Clears the tty from being controlling the session - * (3) Clears the controlling tty for all processes in the - * session group. + * (1) Sends a SIGHUP and SIGCONT to the foreground process group + * (2) Clears the tty from being controlling the session + * (3) Clears the controlling tty for all processes in the + * session group. * * The argument on_exit is set to 1 if called when a process is * exiting; it is 0 if called by the ioctl TIOCNOTTY. @@ -269,6 +274,7 @@ void disassociate_ctty(int on_exit) tty_vhangup_session(tty); } else { struct pid *tty_pgrp = tty_get_pgrp(tty); + if (tty_pgrp) { kill_pgrp(tty_pgrp, SIGHUP, on_exit); if (!on_exit) @@ -280,6 +286,7 @@ void disassociate_ctty(int on_exit) } else if (on_exit) { struct pid *old_pgrp; + spin_lock_irq(¤t->sighand->siglock); old_pgrp = current->signal->tty_old_pgrp; current->signal->tty_old_pgrp = NULL; @@ -324,10 +331,13 @@ void disassociate_ctty(int on_exit) */ void no_tty(void) { - /* FIXME: Review locking here. The tty_lock never covered any race - between a new association and proc_clear_tty but possible we need - to protect against this anyway */ + /* + * FIXME: Review locking here. The tty_lock never covered any race + * between a new association and proc_clear_tty but possibly we need + * to protect against this anyway. + */ struct task_struct *tsk = current; + disassociate_ctty(0); proc_clear_tty(tsk); } @@ -531,7 +541,7 @@ static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t _ /* * (tty == real_tty) is a cheap way of * testing if the tty is NOT a master pty. - */ + */ if (tty == real_tty && current->signal->tty != real_tty) return -ENOTTY; diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 1ba74d6f5e5c..03f414172f34 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -19,6 +19,7 @@ #include #include #include +#include "tty.h" #undef LDISC_DEBUG_HANGUP @@ -147,7 +148,7 @@ static int tty_ldisc_autoload = IS_BUILTIN(CONFIG_LDISC_AUTOLOAD); * Returns: -EINVAL if the discipline index is not [N_TTY..NR_LDISCS] or * if the discipline is not registered * -EAGAIN if request_module() failed to load or register the - * the discipline + * discipline * -ENOMEM if allocation failure * * Otherwise, returns a pointer to the discipline and bumps the @@ -459,7 +460,7 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); if (ld->ops->open) { int ret; - /* BTM here locks versus a hangup event */ + /* BTM here locks versus a hangup event */ ret = ld->ops->open(tty); if (ret) clear_bit(TTY_LDISC_OPEN, &tty->flags); @@ -508,7 +509,8 @@ static int tty_ldisc_failto(struct tty_struct *tty, int ld) return PTR_ERR(disc); tty->ldisc = disc; tty_set_termios_ldisc(tty, ld); - if ((r = tty_ldisc_open(tty, disc)) < 0) + r = tty_ldisc_open(tty, disc); + if (r < 0) tty_ldisc_put(disc); return r; } @@ -529,9 +531,11 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) const char *name = tty_name(tty); pr_warn("Falling back ldisc for %s.\n", name); - /* The traditional behaviour is to fall back to N_TTY, we - want to avoid falling back to N_NULL unless we have no - choice to avoid the risk of breaking anything */ + /* + * The traditional behaviour is to fall back to N_TTY, we + * want to avoid falling back to N_NULL unless we have no + * choice to avoid the risk of breaking anything + */ if (tty_ldisc_failto(tty, N_TTY) < 0 && tty_ldisc_failto(tty, N_NULL) < 0) panic("Couldn't open N_NULL ldisc for %s.", name); @@ -600,17 +604,21 @@ int tty_set_ldisc(struct tty_struct *tty, int disc) up_read(&tty->termios_rwsem); } - /* At this point we hold a reference to the new ldisc and a - reference to the old ldisc, or we hold two references to - the old ldisc (if it was restored as part of error cleanup - above). In either case, releasing a single reference from - the old ldisc is correct. */ + /* + * At this point we hold a reference to the new ldisc and a + * reference to the old ldisc, or we hold two references to + * the old ldisc (if it was restored as part of error cleanup + * above). In either case, releasing a single reference from + * the old ldisc is correct. + */ new_ldisc = old_ldisc; out: tty_ldisc_unlock(tty); - /* Restart the work queue in case no characters kick it off. Safe if - already running */ + /* + * Restart the work queue in case no characters kick it off. Safe if + * already running + */ tty_buffer_restart_work(tty->port); err: tty_ldisc_put(new_ldisc); /* drop the extra reference */ @@ -771,6 +779,7 @@ void tty_ldisc_hangup(struct tty_struct *tty, bool reinit) int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) { int retval = tty_ldisc_open(tty, tty->ldisc); + if (retval) return retval; @@ -811,8 +820,10 @@ void tty_ldisc_release(struct tty_struct *tty) tty_ldisc_kill(o_tty); tty_ldisc_unlock_pair(tty, o_tty); - /* And the memory resources remaining (buffers, termios) will be - disposed of when the kref hits zero */ + /* + * And the memory resources remaining (buffers, termios) will be + * disposed of when the kref hits zero + */ tty_ldisc_debug(tty, "released\n"); } @@ -829,6 +840,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_release); int tty_ldisc_init(struct tty_struct *tty) { struct tty_ldisc *ld = tty_ldisc_get(tty, N_TTY); + if (IS_ERR(ld)) return PTR_ERR(ld); tty->ldisc = ld; diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c index 2640635ee177..393518a24cfe 100644 --- a/drivers/tty/tty_mutex.c +++ b/drivers/tty/tty_mutex.c @@ -4,6 +4,7 @@ #include #include #include +#include "tty.h" /* Legacy tty mutex glue */ diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 346d20f4a486..303c198fbf5c 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -18,6 +18,7 @@ #include #include #include +#include "tty.h" static int tty_port_default_receive_buf(struct tty_port *port, const unsigned char *p, diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c index e2d6205f83ce..0a3a71e14df4 100644 --- a/drivers/tty/vcc.c +++ b/drivers/tty/vcc.c @@ -14,16 +14,9 @@ #include #include -#define DRV_MODULE_NAME "vcc" -#define DRV_MODULE_VERSION "1.1" -#define DRV_MODULE_RELDATE "July 1, 2017" - -static char version[] = - DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")"; - MODULE_DESCRIPTION("Sun LDOM virtual console concentrator driver"); MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_MODULE_VERSION); +MODULE_VERSION("1.1"); struct vcc_port { struct vio_driver_state vio; @@ -59,16 +52,14 @@ struct vcc_port { #define VCC_CTL_BREAK -1 #define VCC_CTL_HUP -2 -static const char vcc_driver_name[] = "vcc"; -static const char vcc_device_node[] = "vcc"; static struct tty_driver *vcc_tty_driver; static struct vcc_port *vcc_table[VCC_MAX_PORTS]; static DEFINE_SPINLOCK(vcc_table_lock); -int vcc_dbg; -int vcc_dbg_ldc; -int vcc_dbg_vio; +static unsigned int vcc_dbg; +static unsigned int vcc_dbg_ldc; +static unsigned int vcc_dbg_vio; module_param(vcc_dbg, uint, 0664); module_param(vcc_dbg_ldc, uint, 0664); @@ -735,11 +726,6 @@ static int vcc_open(struct tty_struct *tty, struct file *vcc_file) { struct vcc_port *port; - if (unlikely(!tty)) { - pr_err("VCC: open: Invalid TTY handle\n"); - return -ENXIO; - } - if (tty->count > 1) return -EBUSY; @@ -773,11 +759,6 @@ static int vcc_open(struct tty_struct *tty, struct file *vcc_file) static void vcc_close(struct tty_struct *tty, struct file *vcc_file) { - if (unlikely(!tty)) { - pr_err("VCC: close: Invalid TTY handle\n"); - return; - } - if (unlikely(tty->count > 1)) return; @@ -805,11 +786,6 @@ static void vcc_hangup(struct tty_struct *tty) { struct vcc_port *port; - if (unlikely(!tty)) { - pr_err("VCC: hangup: Invalid TTY handle\n"); - return; - } - port = vcc_get_ne(tty->index); if (unlikely(!port)) { pr_err("VCC: hangup: Failed to find VCC port\n"); @@ -839,11 +815,6 @@ static int vcc_write(struct tty_struct *tty, const unsigned char *buf, int tosend = 0; int rv = -EINVAL; - if (unlikely(!tty)) { - pr_err("VCC: write: Invalid TTY handle\n"); - return -ENXIO; - } - port = vcc_get_ne(tty->index); if (unlikely(!port)) { pr_err("VCC: write: Failed to find VCC port"); @@ -904,15 +875,10 @@ static int vcc_write_room(struct tty_struct *tty) struct vcc_port *port; u64 num; - if (unlikely(!tty)) { - pr_err("VCC: write_room: Invalid TTY handle\n"); - return -ENXIO; - } - port = vcc_get_ne(tty->index); if (unlikely(!port)) { pr_err("VCC: write_room: Failed to find VCC port\n"); - return -ENODEV; + return 0; } num = VCC_BUFF_LEN - port->chars_in_buffer; @@ -927,15 +893,10 @@ static int vcc_chars_in_buffer(struct tty_struct *tty) struct vcc_port *port; u64 num; - if (unlikely(!tty)) { - pr_err("VCC: chars_in_buffer: Invalid TTY handle\n"); - return -ENXIO; - } - port = vcc_get_ne(tty->index); if (unlikely(!port)) { pr_err("VCC: chars_in_buffer: Failed to find VCC port\n"); - return -ENODEV; + return 0; } num = port->chars_in_buffer; @@ -950,11 +911,6 @@ static int vcc_break_ctl(struct tty_struct *tty, int state) struct vcc_port *port; unsigned long flags; - if (unlikely(!tty)) { - pr_err("VCC: break_ctl: Invalid TTY handle\n"); - return -ENXIO; - } - port = vcc_get_ne(tty->index); if (unlikely(!port)) { pr_err("VCC: break_ctl: Failed to find VCC port\n"); @@ -985,11 +941,6 @@ static int vcc_install(struct tty_driver *driver, struct tty_struct *tty) struct tty_port *port_tty; int ret; - if (unlikely(!tty)) { - pr_err("VCC: install: Invalid TTY handle\n"); - return -ENXIO; - } - if (tty->index >= VCC_MAX_PORTS) return -EINVAL; @@ -1024,11 +975,6 @@ static void vcc_cleanup(struct tty_struct *tty) { struct vcc_port *port; - if (unlikely(!tty)) { - pr_err("VCC: cleanup: Invalid TTY handle\n"); - return; - } - port = vcc_get(tty->index, true); if (port) { port->tty = NULL; @@ -1066,16 +1012,14 @@ static int vcc_tty_init(void) { int rv; - pr_info("VCC: %s\n", version); - vcc_tty_driver = tty_alloc_driver(VCC_MAX_PORTS, VCC_TTY_FLAGS); if (IS_ERR(vcc_tty_driver)) { pr_err("VCC: TTY driver alloc failed\n"); return PTR_ERR(vcc_tty_driver); } - vcc_tty_driver->driver_name = vcc_driver_name; - vcc_tty_driver->name = vcc_device_node; + vcc_tty_driver->driver_name = "vcc"; + vcc_tty_driver->name = "vcc"; vcc_tty_driver->minor_start = VCC_MINOR_START; vcc_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM; diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 77638629c562..5d2309742718 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -2186,7 +2186,7 @@ void vt_reset_unicode(int console) } /** - * vt_get_shiftstate - shift bit state + * vt_get_shift_state - shift bit state * * Report the shift bits from the keyboard state. We have to export * this to support some oddities in the vt layer. diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 284b07224c55..01645e87b3d5 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1381,6 +1381,7 @@ struct vc_data *vc_deallocate(unsigned int currcons) atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m); vcs_remove_sysfs(currcons); visual_deinit(vc); + con_free_unimap(vc); put_pid(vc->vt_pid); vc_uniscr_set(vc, NULL); kfree(vc->vc_screenbuf); @@ -4448,7 +4449,7 @@ void poke_blanked_console(void) might_sleep(); /* This isn't perfectly race free, but a race here would be mostly harmless, - * at worse, we'll do a spurrious blank and it's unlikely + * at worst, we'll do a spurious blank and it's unlikely */ del_timer(&console_timer); blank_timer_expired = 0; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 701dfb32b129..bb3d39307d93 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1042,7 +1042,7 @@ static int mos7720_write_room(struct tty_struct *tty) mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) - return -ENODEV; + return 0; /* FIXME: Locking */ for (i = 0; i < NUM_URBS; ++i) { diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 962c12be9774..39258f9d36a0 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -79,7 +79,6 @@ static struct uni_pagedir *vgacon_uni_pagedir; static int vgacon_refcount; /* Description of the hardware situation */ -static bool vga_init_done; static unsigned long vga_vram_base __read_mostly; /* Base of video memory */ static unsigned long vga_vram_end __read_mostly; /* End of video memory */ static unsigned int vga_vram_size __read_mostly; /* Size of video memory */ @@ -96,7 +95,7 @@ static bool vga_is_gfx; static bool vga_512_chars; static int vga_video_font_height; static int vga_scan_lines __read_mostly; -static unsigned int vga_rolled_over; +static unsigned int vga_rolled_over; /* last vc_origin offset before wrap */ static bool vgacon_text_mode_force; static bool vga_hardscroll_enabled; @@ -359,8 +358,6 @@ static const char *vgacon_startup(void) vgacon_xres = screen_info.orig_video_cols * VGA_FONTWIDTH; vgacon_yres = vga_scan_lines; - vga_init_done = true; - return display_desc; } diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h deleted file mode 100644 index 05ee0f19448a..000000000000 --- a/include/linux/cyclades.h +++ /dev/null @@ -1,364 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ - * linux/include/linux/cyclades.h - * - * This file was initially written by - * Randolph Bentson and is maintained by - * Ivan Passos . - * - * This file contains the general definitions for the cyclades.c driver - *$Log: cyclades.h,v $ - *Revision 3.1 2002/01/29 11:36:16 henrique - *added throttle field on struct cyclades_port to indicate whether the - *port is throttled or not - * - *Revision 3.1 2000/04/19 18:52:52 ivan - *converted address fields to unsigned long and added fields for physical - *addresses on cyclades_card structure; - * - *Revision 3.0 1998/11/02 14:20:59 ivan - *added nports field on cyclades_card structure; - * - *Revision 2.5 1998/08/03 16:57:01 ivan - *added cyclades_idle_stats structure; - * - *Revision 2.4 1998/06/01 12:09:53 ivan - *removed closing_wait2 from cyclades_port structure; - * - *Revision 2.3 1998/03/16 18:01:12 ivan - *changes in the cyclades_port structure to get it closer to the - *standard serial port structure; - *added constants for new ioctls; - * - *Revision 2.2 1998/02/17 16:50:00 ivan - *changes in the cyclades_port structure (addition of shutdown_wait and - *chip_rev variables); - *added constants for new ioctls and for CD1400 rev. numbers. - * - *Revision 2.1 1997/10/24 16:03:00 ivan - *added rflow (which allows enabling the CD1400 special flow control - *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to - *cyclades_port structure; - *added Alpha support - * - *Revision 2.0 1997/06/30 10:30:00 ivan - *added some new doorbell command constants related to IOCTLW and - *UART error signaling - * - *Revision 1.8 1997/06/03 15:30:00 ivan - *added constant ZFIRM_HLT - *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) - * - *Revision 1.7 1997/03/26 10:30:00 daniel - *new entries at the end of cyclades_port struct to reallocate - *variables illegally allocated within card memory. - * - *Revision 1.6 1996/09/09 18:35:30 bentson - *fold in changes for Cyclom-Z -- including structures for - *communicating with board as well modest changes to original - *structures to support new features. - * - *Revision 1.5 1995/11/13 21:13:31 bentson - *changes suggested by Michael Chastain - *to support use of this file in non-kernel applications - * - * - */ -#ifndef _LINUX_CYCLADES_H -#define _LINUX_CYCLADES_H - -#include - - -/* Per card data structure */ -struct cyclades_card { - void __iomem *base_addr; - union { - void __iomem *p9050; - struct RUNTIME_9060 __iomem *p9060; - } ctl_addr; - struct BOARD_CTRL __iomem *board_ctrl; /* cyz specific */ - int irq; - unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */ - unsigned int first_line; /* minor number of first channel on card */ - unsigned int nports; /* Number of ports in the card */ - int bus_index; /* address shift - 0 for ISA, 1 for PCI */ - int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */ - u32 hw_ver; - spinlock_t card_lock; - struct cyclades_port *ports; -}; - -/*************************************** - * Memory access functions/macros * - * (required to support Alpha systems) * - ***************************************/ - -#define cy_writeb(port,val) do { writeb((val), (port)); mb(); } while (0) -#define cy_writew(port,val) do { writew((val), (port)); mb(); } while (0) -#define cy_writel(port,val) do { writel((val), (port)); mb(); } while (0) - -/* - * Statistics counters - */ -struct cyclades_icount { - __u32 cts, dsr, rng, dcd, tx, rx; - __u32 frame, parity, overrun, brk; - __u32 buf_overrun; -}; - -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -struct cyclades_port { - int magic; - struct tty_port port; - struct cyclades_card *card; - union { - struct { - void __iomem *base_addr; - } cyy; - struct { - struct CH_CTRL __iomem *ch_ctrl; - struct BUF_CTRL __iomem *buf_ctrl; - } cyz; - } u; - int line; - int flags; /* defined in tty.h */ - int type; /* UART type */ - int read_status_mask; - int ignore_status_mask; - int timeout; - int xmit_fifo_size; - int cor1,cor2,cor3,cor4,cor5; - int tbpr,tco,rbpr,rco; - int baud; - int rflow; - int rtsdtr_inv; - int chip_rev; - int custom_divisor; - u8 x_char; /* to be pushed out ASAP */ - int breakon; - int breakoff; - int xmit_head; - int xmit_tail; - int xmit_cnt; - int default_threshold; - int default_timeout; - unsigned long rflush_count; - struct cyclades_monitor mon; - struct cyclades_idle_stats idle_stats; - struct cyclades_icount icount; - struct completion shutdown_wait; - int throttle; -#ifdef CONFIG_CYZ_INTR - struct timer_list rx_full_timer; -#endif -}; - -#define CLOSING_WAIT_DELAY 30*HZ -#define CY_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE -#define CY_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF - - -#define CyMAX_CHIPS_PER_CARD 8 -#define CyMAX_CHAR_FIFO 12 -#define CyPORTS_PER_CHIP 4 -#define CD1400_MAX_SPEED 115200 - -#define CyISA_Ywin 0x2000 - -#define CyPCI_Ywin 0x4000 -#define CyPCI_Yctl 0x80 -#define CyPCI_Zctl CTRL_WINDOW_SIZE -#define CyPCI_Zwin 0x80000 -#define CyPCI_Ze_win (2 * CyPCI_Zwin) - -#define PCI_DEVICE_ID_MASK 0x06 - -/**** CD1400 registers ****/ - -#define CD1400_REV_G 0x46 -#define CD1400_REV_J 0x48 - -#define CyRegSize 0x0400 -#define Cy_HwReset 0x1400 -#define Cy_ClrIntr 0x1800 -#define Cy_EpldRev 0x1e00 - -/* Global Registers */ - -#define CyGFRCR (0x40*2) -#define CyRevE (44) -#define CyCAR (0x68*2) -#define CyCHAN_0 (0x00) -#define CyCHAN_1 (0x01) -#define CyCHAN_2 (0x02) -#define CyCHAN_3 (0x03) -#define CyGCR (0x4B*2) -#define CyCH0_SERIAL (0x00) -#define CyCH0_PARALLEL (0x80) -#define CySVRR (0x67*2) -#define CySRModem (0x04) -#define CySRTransmit (0x02) -#define CySRReceive (0x01) -#define CyRICR (0x44*2) -#define CyTICR (0x45*2) -#define CyMICR (0x46*2) -#define CyICR0 (0x00) -#define CyICR1 (0x01) -#define CyICR2 (0x02) -#define CyICR3 (0x03) -#define CyRIR (0x6B*2) -#define CyTIR (0x6A*2) -#define CyMIR (0x69*2) -#define CyIRDirEq (0x80) -#define CyIRBusy (0x40) -#define CyIRUnfair (0x20) -#define CyIRContext (0x1C) -#define CyIRChannel (0x03) -#define CyPPR (0x7E*2) -#define CyCLOCK_20_1MS (0x27) -#define CyCLOCK_25_1MS (0x31) -#define CyCLOCK_25_5MS (0xf4) -#define CyCLOCK_60_1MS (0x75) -#define CyCLOCK_60_2MS (0xea) - -/* Virtual Registers */ - -#define CyRIVR (0x43*2) -#define CyTIVR (0x42*2) -#define CyMIVR (0x41*2) -#define CyIVRMask (0x07) -#define CyIVRRxEx (0x07) -#define CyIVRRxOK (0x03) -#define CyIVRTxOK (0x02) -#define CyIVRMdmOK (0x01) -#define CyTDR (0x63*2) -#define CyRDSR (0x62*2) -#define CyTIMEOUT (0x80) -#define CySPECHAR (0x70) -#define CyBREAK (0x08) -#define CyPARITY (0x04) -#define CyFRAME (0x02) -#define CyOVERRUN (0x01) -#define CyMISR (0x4C*2) -/* see CyMCOR_ and CyMSVR_ for bits*/ -#define CyEOSRR (0x60*2) - -/* Channel Registers */ - -#define CyLIVR (0x18*2) -#define CyMscsr (0x01) -#define CyTdsr (0x02) -#define CyRgdsr (0x03) -#define CyRedsr (0x07) -#define CyCCR (0x05*2) -/* Format 1 */ -#define CyCHAN_RESET (0x80) -#define CyCHIP_RESET (0x81) -#define CyFlushTransFIFO (0x82) -/* Format 2 */ -#define CyCOR_CHANGE (0x40) -#define CyCOR1ch (0x02) -#define CyCOR2ch (0x04) -#define CyCOR3ch (0x08) -/* Format 3 */ -#define CySEND_SPEC_1 (0x21) -#define CySEND_SPEC_2 (0x22) -#define CySEND_SPEC_3 (0x23) -#define CySEND_SPEC_4 (0x24) -/* Format 4 */ -#define CyCHAN_CTL (0x10) -#define CyDIS_RCVR (0x01) -#define CyENB_RCVR (0x02) -#define CyDIS_XMTR (0x04) -#define CyENB_XMTR (0x08) -#define CySRER (0x06*2) -#define CyMdmCh (0x80) -#define CyRxData (0x10) -#define CyTxRdy (0x04) -#define CyTxMpty (0x02) -#define CyNNDT (0x01) -#define CyCOR1 (0x08*2) -#define CyPARITY_NONE (0x00) -#define CyPARITY_0 (0x20) -#define CyPARITY_1 (0xA0) -#define CyPARITY_E (0x40) -#define CyPARITY_O (0xC0) -#define Cy_1_STOP (0x00) -#define Cy_1_5_STOP (0x04) -#define Cy_2_STOP (0x08) -#define Cy_5_BITS (0x00) -#define Cy_6_BITS (0x01) -#define Cy_7_BITS (0x02) -#define Cy_8_BITS (0x03) -#define CyCOR2 (0x09*2) -#define CyIXM (0x80) -#define CyTxIBE (0x40) -#define CyETC (0x20) -#define CyAUTO_TXFL (0x60) -#define CyLLM (0x10) -#define CyRLM (0x08) -#define CyRtsAO (0x04) -#define CyCtsAE (0x02) -#define CyDsrAE (0x01) -#define CyCOR3 (0x0A*2) -#define CySPL_CH_DRANGE (0x80) /* special character detect range */ -#define CySPL_CH_DET1 (0x40) /* enable special character detection - on SCHR4-SCHR3 */ -#define CyFL_CTRL_TRNSP (0x20) /* Flow Control Transparency */ -#define CySPL_CH_DET2 (0x10) /* Enable special character detection - on SCHR2-SCHR1 */ -#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */ -#define CyCOR4 (0x1E*2) -#define CyCOR5 (0x1F*2) -#define CyCCSR (0x0B*2) -#define CyRxEN (0x80) -#define CyRxFloff (0x40) -#define CyRxFlon (0x20) -#define CyTxEN (0x08) -#define CyTxFloff (0x04) -#define CyTxFlon (0x02) -#define CyRDCR (0x0E*2) -#define CySCHR1 (0x1A*2) -#define CySCHR2 (0x1B*2) -#define CySCHR3 (0x1C*2) -#define CySCHR4 (0x1D*2) -#define CySCRL (0x22*2) -#define CySCRH (0x23*2) -#define CyLNC (0x24*2) -#define CyMCOR1 (0x15*2) -#define CyMCOR2 (0x16*2) -#define CyRTPR (0x21*2) -#define CyMSVR1 (0x6C*2) -#define CyMSVR2 (0x6D*2) -#define CyANY_DELTA (0xF0) -#define CyDSR (0x80) -#define CyCTS (0x40) -#define CyRI (0x20) -#define CyDCD (0x10) -#define CyDTR (0x02) -#define CyRTS (0x01) -#define CyPVSR (0x6F*2) -#define CyRBPR (0x78*2) -#define CyRCOR (0x7C*2) -#define CyTBPR (0x72*2) -#define CyTCOR (0x76*2) - -/* Custom Registers */ - -#define CyPLX_VER (0x3400) -#define PLX_9050 0x0b -#define PLX_9060 0x0c -#define PLX_9080 0x0d - -/***************************************************************************/ - -#endif /* _LINUX_CYCLADES_H */ diff --git a/include/linux/isicom.h b/include/linux/isicom.h deleted file mode 100644 index 7de6822d7b1a..000000000000 --- a/include/linux/isicom.h +++ /dev/null @@ -1,85 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_ISICOM_H -#define _LINUX_ISICOM_H - -#define YES 1 -#define NO 0 - -/* - * ISICOM Driver definitions ... - * - */ - -#define ISICOM_NAME "ISICom" - -/* - * PCI definitions - */ - -#define DEVID_COUNT 9 -#define VENDOR_ID 0x10b5 - -/* - * These are now officially allocated numbers - */ - -#define ISICOM_NMAJOR 112 /* normal */ -#define ISICOM_CMAJOR 113 /* callout */ -#define ISICOM_MAGIC (('M' << 8) | 'T') - -#define WAKEUP_CHARS 256 /* hard coded for now */ -#define TX_SIZE 254 - -#define BOARD_COUNT 4 -#define PORT_COUNT (BOARD_COUNT*16) - -/* character sizes */ - -#define ISICOM_CS5 0x0000 -#define ISICOM_CS6 0x0001 -#define ISICOM_CS7 0x0002 -#define ISICOM_CS8 0x0003 - -/* stop bits */ - -#define ISICOM_1SB 0x0000 -#define ISICOM_2SB 0x0004 - -/* parity */ - -#define ISICOM_NOPAR 0x0000 -#define ISICOM_ODPAR 0x0008 -#define ISICOM_EVPAR 0x0018 - -/* flow control */ - -#define ISICOM_CTSRTS 0x03 -#define ISICOM_INITIATE_XONXOFF 0x04 -#define ISICOM_RESPOND_XONXOFF 0x08 - -#define BOARD(line) (((line) >> 4) & 0x3) - - /* isi kill queue bitmap */ - -#define ISICOM_KILLTX 0x01 -#define ISICOM_KILLRX 0x02 - - /* isi_board status bitmap */ - -#define FIRMWARE_LOADED 0x0001 -#define BOARD_ACTIVE 0x0002 -#define BOARD_INIT 0x0004 - - /* isi_port status bitmap */ - -#define ISI_CTS 0x1000 -#define ISI_DSR 0x2000 -#define ISI_RI 0x4000 -#define ISI_DCD 0x8000 -#define ISI_DTR 0x0100 -#define ISI_RTS 0x0200 - - -#define ISI_TXOK 0x0001 - -#endif /* ISICOM_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index a76ccb697bef..4c3fa5293d76 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1688,37 +1688,8 @@ #define PCI_VENDOR_ID_MICROSEMI 0x11f8 #define PCI_VENDOR_ID_RP 0x11fe -#define PCI_DEVICE_ID_RP32INTF 0x0001 -#define PCI_DEVICE_ID_RP8INTF 0x0002 -#define PCI_DEVICE_ID_RP16INTF 0x0003 -#define PCI_DEVICE_ID_RP4QUAD 0x0004 -#define PCI_DEVICE_ID_RP8OCTA 0x0005 -#define PCI_DEVICE_ID_RP8J 0x0006 -#define PCI_DEVICE_ID_RP4J 0x0007 -#define PCI_DEVICE_ID_RP8SNI 0x0008 -#define PCI_DEVICE_ID_RP16SNI 0x0009 -#define PCI_DEVICE_ID_RPP4 0x000A -#define PCI_DEVICE_ID_RPP8 0x000B -#define PCI_DEVICE_ID_RP4M 0x000D -#define PCI_DEVICE_ID_RP2_232 0x000E -#define PCI_DEVICE_ID_RP2_422 0x000F -#define PCI_DEVICE_ID_URP32INTF 0x0801 -#define PCI_DEVICE_ID_URP8INTF 0x0802 -#define PCI_DEVICE_ID_URP16INTF 0x0803 -#define PCI_DEVICE_ID_URP8OCTA 0x0805 -#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C -#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D -#define PCI_DEVICE_ID_CRP16INTF 0x0903 #define PCI_VENDOR_ID_CYCLADES 0x120e -#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100 -#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101 -#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102 -#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103 -#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104 -#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105 -#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200 -#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201 #define PCI_DEVICE_ID_PC300_RX_2 0x0300 #define PCI_DEVICE_ID_PC300_RX_1 0x0301 #define PCI_DEVICE_ID_PC300_TE_2 0x0310 @@ -2065,8 +2036,6 @@ #define PCI_DEVICE_ID_EXAR_XR17V358 0x0358 #define PCI_VENDOR_ID_MICROGATE 0x13c0 -#define PCI_DEVICE_ID_MICROGATE_USC 0x0010 -#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030 #define PCI_VENDOR_ID_3WARE 0x13C1 #define PCI_DEVICE_ID_3WARE_1000 0x1000 diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index e1b684e33841..d7ed00f1594e 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -500,19 +500,19 @@ static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int c return 0; } -static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags) +static inline void uart_unlock_and_check_sysrq(struct uart_port *port) { int sysrq_ch; if (!port->has_sysrq) { - spin_unlock_irqrestore(&port->lock, irqflags); + spin_unlock(&port->lock); return; } sysrq_ch = port->sysrq_ch; port->sysrq_ch = 0; - spin_unlock_irqrestore(&port->lock, irqflags); + spin_unlock(&port->lock); if (sysrq_ch) handle_sysrq(sysrq_ch); @@ -526,9 +526,9 @@ static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int c { return 0; } -static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags) +static inline void uart_unlock_and_check_sysrq(struct uart_port *port) { - spin_unlock_irqrestore(&port->lock, irqflags); + spin_unlock(&port->lock); } #endif /* CONFIG_MAGIC_SYSRQ_SERIAL */ diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h index ca2c5393dc6b..f6c3323fc4c5 100644 --- a/include/linux/serial_s3c.h +++ b/include/linux/serial_s3c.h @@ -246,6 +246,22 @@ S5PV210_UFCON_TXTRIG4 | \ S5PV210_UFCON_RXTRIG4) +#define APPLE_S5L_UCON_RXTO_ENA 9 +#define APPLE_S5L_UCON_RXTHRESH_ENA 12 +#define APPLE_S5L_UCON_TXTHRESH_ENA 13 +#define APPLE_S5L_UCON_RXTO_ENA_MSK (1 << APPLE_S5L_UCON_RXTO_ENA) +#define APPLE_S5L_UCON_RXTHRESH_ENA_MSK (1 << APPLE_S5L_UCON_RXTHRESH_ENA) +#define APPLE_S5L_UCON_TXTHRESH_ENA_MSK (1 << APPLE_S5L_UCON_TXTHRESH_ENA) + +#define APPLE_S5L_UCON_DEFAULT (S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define APPLE_S5L_UTRSTAT_RXTHRESH (1<<4) +#define APPLE_S5L_UTRSTAT_TXTHRESH (1<<5) +#define APPLE_S5L_UTRSTAT_RXTO (1<<9) +#define APPLE_S5L_UTRSTAT_ALL_FLAGS (0x3f0) + #ifndef __ASSEMBLY__ #include diff --git a/include/linux/tty.h b/include/linux/tty.h index 95fc2f100f12..e5d6b1f28823 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -16,30 +16,6 @@ #include -/* - * Lock subclasses for tty locks - * - * TTY_LOCK_NORMAL is for normal ttys and master ptys. - * TTY_LOCK_SLAVE is for slave ptys only. - * - * Lock subclasses are necessary for handling nested locking with pty pairs. - * tty locks which use nested locking: - * - * legacy_mutex - Nested tty locks are necessary for releasing pty pairs. - * The stable lock order is master pty first, then slave pty. - * termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem. - * Subclassing this lock enables the slave pty to hold its - * termios_rwsem when claiming the master tty_buffer lock. - * tty_buffer lock - slave ptys can claim nested buffer lock when handling - * signal chars. The stable lock order is slave pty, then - * master. - */ - -enum { - TTY_LOCK_NORMAL = 0, - TTY_LOCK_SLAVE, -}; - /* * (Note: the *_driver.minor_start values 1, 64, 128, 192 are * hardcoded at present.) @@ -284,7 +260,7 @@ struct tty_operations; struct tty_struct { int magic; struct kref kref; - struct device *dev; + struct device *dev; /* class device or NULL (e.g. ptys, serdev) */ struct tty_driver *driver; const struct tty_operations *ops; int index; @@ -373,21 +349,6 @@ struct tty_file_private { #define TTY_LDISC_CHANGING 20 /* Change pending - non-block IO */ #define TTY_LDISC_HALTED 22 /* Line discipline is halted */ -/* Values for tty->flow_change */ -#define TTY_THROTTLE_SAFE 1 -#define TTY_UNTHROTTLE_SAFE 2 - -static inline void __tty_set_flow_change(struct tty_struct *tty, int val) -{ - tty->flow_change = val; -} - -static inline void tty_set_flow_change(struct tty_struct *tty, int val) -{ - tty->flow_change = val; - smp_mb(); -} - static inline bool tty_io_nonblock(struct tty_struct *tty, struct file *file) { return file->f_flags & O_NONBLOCK || @@ -419,10 +380,6 @@ extern struct tty_struct *tty_kopen_exclusive(dev_t device); extern struct tty_struct *tty_kopen_shared(dev_t device); extern void tty_kclose(struct tty_struct *tty); extern int tty_dev_name_to_number(const char *name, dev_t *number); -extern int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout); -extern void tty_ldisc_unlock(struct tty_struct *tty); -extern ssize_t redirected_tty_write(struct kiocb *, struct iov_iter *); -extern struct file *tty_release_redirect(struct tty_struct *tty); #else static inline void tty_kref_put(struct tty_struct *tty) { } @@ -475,14 +432,10 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) extern const char *tty_driver_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); -extern int __tty_check_change(struct tty_struct *tty, int sig); -extern int tty_check_change(struct tty_struct *tty); -extern void __stop_tty(struct tty_struct *tty); extern void stop_tty(struct tty_struct *tty); -extern void __start_tty(struct tty_struct *tty); extern void start_tty(struct tty_struct *tty); extern int tty_register_driver(struct tty_driver *driver); -extern int tty_unregister_driver(struct tty_driver *driver); +extern void tty_unregister_driver(struct tty_driver *driver); extern struct device *tty_register_device(struct tty_driver *driver, unsigned index, struct device *dev); extern struct device *tty_register_device_attr(struct tty_driver *driver, @@ -506,23 +459,11 @@ extern int tty_get_icount(struct tty_struct *tty, extern int is_current_pgrp_orphaned(void); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); -extern void tty_vhangup_session(struct tty_struct *tty); extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); -extern void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty); -extern int tty_signal_session_leader(struct tty_struct *tty, int exit_session); -extern void session_clear_tty(struct pid *session); extern void no_tty(void); -extern void tty_buffer_free_all(struct tty_port *port); -extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); -extern void tty_buffer_init(struct tty_port *port); -extern void tty_buffer_set_lock_subclass(struct tty_port *port); -extern bool tty_buffer_restart_work(struct tty_port *port); -extern bool tty_buffer_cancel_work(struct tty_port *port); -extern void tty_buffer_flush_work(struct tty_port *port); extern speed_t tty_termios_baud_rate(struct ktermios *termios); -extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); extern void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud); extern void tty_encode_baud_rate(struct tty_struct *tty, @@ -550,27 +491,16 @@ extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *); -extern void tty_ldisc_hangup(struct tty_struct *tty, bool reset); -extern int tty_ldisc_reinit(struct tty_struct *tty, int disc); extern const struct seq_operations tty_ldiscs_seq_ops; extern void tty_wakeup(struct tty_struct *tty); extern void tty_ldisc_flush(struct tty_struct *tty); -extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -extern long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, - struct file *file, unsigned int cmd, unsigned long arg); extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); -extern void tty_default_fops(struct file_operations *fops); -extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx); -extern int tty_alloc_file(struct file *file); -extern void tty_add_file(struct tty_struct *tty, struct file *file); -extern void tty_free_file(struct file *file); extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx); extern void tty_release_struct(struct tty_struct *tty, int idx); -extern int tty_release(struct inode *inode, struct file *filp); extern void tty_init_termios(struct tty_struct *tty); extern void tty_save_termios(struct tty_struct *tty); extern int tty_standard_install(struct tty_driver *driver, @@ -578,8 +508,6 @@ extern int tty_standard_install(struct tty_driver *driver, extern struct mutex tty_mutex; -#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock)) - extern void tty_port_init(struct tty_port *port); extern void tty_port_link_device(struct tty_port *port, struct tty_driver *driver, unsigned index); @@ -699,13 +627,8 @@ static inline int tty_port_users(struct tty_port *port) extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); extern int tty_unregister_ldisc(int disc); extern int tty_set_ldisc(struct tty_struct *tty, int disc); -extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty); -extern void tty_ldisc_release(struct tty_struct *tty); -extern int __must_check tty_ldisc_init(struct tty_struct *tty); -extern void tty_ldisc_deinit(struct tty_struct *tty); extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p, char *f, int count); -extern void tty_sysctl_init(void); /* n_tty.c */ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); @@ -717,20 +640,10 @@ static inline void n_tty_init(void) { } /* tty_audit.c */ #ifdef CONFIG_AUDIT -extern void tty_audit_add_data(struct tty_struct *tty, const void *data, - size_t size); extern void tty_audit_exit(void); extern void tty_audit_fork(struct signal_struct *sig); -extern void tty_audit_tiocsti(struct tty_struct *tty, char ch); extern int tty_audit_push(void); #else -static inline void tty_audit_add_data(struct tty_struct *tty, const void *data, - size_t size) -{ -} -static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch) -{ -} static inline void tty_audit_exit(void) { } @@ -772,16 +685,4 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {} static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #endif -#define tty_msg(fn, tty, f, ...) \ - fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) - -#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__) -#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__) -#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) -#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) -#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__) - -#define tty_info_ratelimited(tty, f, ...) \ - tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__) - #endif diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 61c3372d3f32..2f719b471d52 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -228,7 +228,7 @@ * * Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel * structure to complete. This method is optional and will only be called - * if provided (otherwise EINVAL will be returned). + * if provided (otherwise ENOTTY will be returned). */ #include diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 572a07976116..31284b55bd4f 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -173,7 +173,6 @@ extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass, struct tty_ldisc_ops { - int magic; char *name; int num; int flags; @@ -218,8 +217,6 @@ struct tty_ldisc { struct tty_struct *tty; }; -#define TTY_LDISC_MAGIC 0x5403 - #define LDISC_FLAG_DEFINED 0x00000001 #define MODULE_ALIAS_LDISC(ldisc) \ diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h index 43c9c5d2bedb..bd76e8e082c0 100644 --- a/include/net/nfc/nci_core.h +++ b/include/net/nfc/nci_core.h @@ -430,8 +430,6 @@ struct nci_uart_ops { int (*open)(struct nci_uart *nci_uart); void (*close)(struct nci_uart *nci_uart); int (*recv)(struct nci_uart *nci_uart, struct sk_buff *skb); - int (*recv_buf)(struct nci_uart *nci_uart, const u8 *data, char *flags, - int count); int (*send)(struct nci_uart *nci_uart, struct sk_buff *skb); void (*tx_start)(struct nci_uart *nci_uart); void (*tx_done)(struct nci_uart *nci_uart); diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h deleted file mode 100644 index fc0add2194a9..000000000000 --- a/include/uapi/linux/cyclades.h +++ /dev/null @@ -1,494 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ - * linux/include/linux/cyclades.h - * - * This file was initially written by - * Randolph Bentson and is maintained by - * Ivan Passos . - * - * This file contains the general definitions for the cyclades.c driver - *$Log: cyclades.h,v $ - *Revision 3.1 2002/01/29 11:36:16 henrique - *added throttle field on struct cyclades_port to indicate whether the - *port is throttled or not - * - *Revision 3.1 2000/04/19 18:52:52 ivan - *converted address fields to unsigned long and added fields for physical - *addresses on cyclades_card structure; - * - *Revision 3.0 1998/11/02 14:20:59 ivan - *added nports field on cyclades_card structure; - * - *Revision 2.5 1998/08/03 16:57:01 ivan - *added cyclades_idle_stats structure; - * - *Revision 2.4 1998/06/01 12:09:53 ivan - *removed closing_wait2 from cyclades_port structure; - * - *Revision 2.3 1998/03/16 18:01:12 ivan - *changes in the cyclades_port structure to get it closer to the - *standard serial port structure; - *added constants for new ioctls; - * - *Revision 2.2 1998/02/17 16:50:00 ivan - *changes in the cyclades_port structure (addition of shutdown_wait and - *chip_rev variables); - *added constants for new ioctls and for CD1400 rev. numbers. - * - *Revision 2.1 1997/10/24 16:03:00 ivan - *added rflow (which allows enabling the CD1400 special flow control - *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to - *cyclades_port structure; - *added Alpha support - * - *Revision 2.0 1997/06/30 10:30:00 ivan - *added some new doorbell command constants related to IOCTLW and - *UART error signaling - * - *Revision 1.8 1997/06/03 15:30:00 ivan - *added constant ZFIRM_HLT - *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) - * - *Revision 1.7 1997/03/26 10:30:00 daniel - *new entries at the end of cyclades_port struct to reallocate - *variables illegally allocated within card memory. - * - *Revision 1.6 1996/09/09 18:35:30 bentson - *fold in changes for Cyclom-Z -- including structures for - *communicating with board as well modest changes to original - *structures to support new features. - * - *Revision 1.5 1995/11/13 21:13:31 bentson - *changes suggested by Michael Chastain - *to support use of this file in non-kernel applications - * - * - */ - -#ifndef _UAPI_LINUX_CYCLADES_H -#define _UAPI_LINUX_CYCLADES_H - -#include - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_old_time_t in_use; /* Time device has been in use (secs) */ - __kernel_old_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 -#define CYSETRFLOW 0x43590a -#define CYGETRFLOW 0x43590b -#define CYSETRTSDTR_INV 0x43590c -#define CYGETRTSDTR_INV 0x43590d -#define CYZSETPOLLCYCLE 0x43590e -#define CYZGETPOLLCYCLE 0x43590f -#define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif - -#endif /* _UAPI_LINUX_CYCLADES_H */ diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h index 7e5fa8e15c43..4e5f2b3a3d54 100644 --- a/include/uapi/linux/major.h +++ b/include/uapi/linux/major.h @@ -34,8 +34,6 @@ #define GOLDSTAR_CDROM_MAJOR 16 #define OPTICS_CDROM_MAJOR 17 #define SANYO_CDROM_MAJOR 18 -#define CYCLADES_MAJOR 19 -#define CYCLADESAUX_MAJOR 20 #define MITSUMI_X_CDROM_MAJOR 20 #define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */ #define SCSI_GENERIC_MAJOR 21 diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index 93eb3c496ff1..fa6b16e5fdd8 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -52,11 +52,11 @@ struct serial_struct { #define PORT_16450 2 #define PORT_16550 3 #define PORT_16550A 4 -#define PORT_CIRRUS 5 /* usurped by cyclades.c */ +#define PORT_CIRRUS 5 #define PORT_16650 6 #define PORT_16650V2 7 #define PORT_16750 8 -#define PORT_STARTECH 9 /* usurped by cyclades.c */ +#define PORT_STARTECH 9 #define PORT_16C950 10 /* Oxford Semiconductor */ #define PORT_16654 11 #define PORT_16850 12 diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h index 900a32e63424..cf25056d4b27 100644 --- a/include/uapi/linux/tty_flags.h +++ b/include/uapi/linux/tty_flags.h @@ -39,7 +39,7 @@ * WARNING: These flags are no longer used and have been superceded by the * TTY_PORT_ flags in the iflags field (and not userspace-visible) */ -#ifndef _KERNEL_ +#ifndef __KERNEL__ #define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ #define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ #define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ @@ -73,15 +73,15 @@ #define ASYNC_MAGIC_MULTIPLIER (1U << ASYNCB_MAGIC_MULTIPLIER) #define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) -#define ASYNC_DEPRECATED (ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \ - ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) +#define ASYNC_DEPRECATED (ASYNC_SPLIT_TERMIOS | ASYNC_SESSION_LOCKOUT | \ + ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) #define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) #define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) #define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) -#ifndef _KERNEL_ +#ifndef __KERNEL__ /* These flags are no longer used (and were always masked from userspace) */ #define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) #define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) diff --git a/net/nfc/nci/uart.c b/net/nfc/nci/uart.c index 1204c438e87d..9958b37d8f9d 100644 --- a/net/nfc/nci/uart.c +++ b/net/nfc/nci/uart.c @@ -229,6 +229,72 @@ static void nci_uart_tty_wakeup(struct tty_struct *tty) nci_uart_tx_wakeup(nu); } +/* -- Default recv_buf handler -- + * + * This handler supposes that NCI frames are sent over UART link without any + * framing. It reads NCI header, retrieve the packet size and once all packet + * bytes are received it passes it to nci_uart driver for processing. + */ +static int nci_uart_default_recv_buf(struct nci_uart *nu, const u8 *data, + int count) +{ + int chunk_len; + + if (!nu->ndev) { + nfc_err(nu->tty->dev, + "receive data from tty but no NCI dev is attached yet, drop buffer\n"); + return 0; + } + + /* Decode all incoming data in packets + * and enqueue then for processing. + */ + while (count > 0) { + /* If this is the first data of a packet, allocate a buffer */ + if (!nu->rx_skb) { + nu->rx_packet_len = -1; + nu->rx_skb = nci_skb_alloc(nu->ndev, + NCI_MAX_PACKET_SIZE, + GFP_ATOMIC); + if (!nu->rx_skb) + return -ENOMEM; + } + + /* Eat byte after byte till full packet header is received */ + if (nu->rx_skb->len < NCI_CTRL_HDR_SIZE) { + skb_put_u8(nu->rx_skb, *data++); + --count; + continue; + } + + /* Header was received but packet len was not read */ + if (nu->rx_packet_len < 0) + nu->rx_packet_len = NCI_CTRL_HDR_SIZE + + nci_plen(nu->rx_skb->data); + + /* Compute how many bytes are missing and how many bytes can + * be consumed. + */ + chunk_len = nu->rx_packet_len - nu->rx_skb->len; + if (count < chunk_len) + chunk_len = count; + skb_put_data(nu->rx_skb, data, chunk_len); + data += chunk_len; + count -= chunk_len; + + /* Chcek if packet is fully received */ + if (nu->rx_packet_len == nu->rx_skb->len) { + /* Pass RX packet to driver */ + if (nu->ops.recv(nu, nu->rx_skb) != 0) + nfc_err(nu->tty->dev, "corrupted RX packet\n"); + /* Next packet will be a new one */ + nu->rx_skb = NULL; + } + } + + return 0; +} + /* nci_uart_tty_receive() * * Called by tty low level driver when receive data is @@ -250,7 +316,7 @@ static void nci_uart_tty_receive(struct tty_struct *tty, const u8 *data, return; spin_lock(&nu->rx_lock); - nu->ops.recv_buf(nu, (void *)data, flags, count); + nci_uart_default_recv_buf(nu, data, count); spin_unlock(&nu->rx_lock); tty_unthrottle(tty); @@ -321,78 +387,6 @@ static int nci_uart_send(struct nci_uart *nu, struct sk_buff *skb) return 0; } -/* -- Default recv_buf handler -- - * - * This handler supposes that NCI frames are sent over UART link without any - * framing. It reads NCI header, retrieve the packet size and once all packet - * bytes are received it passes it to nci_uart driver for processing. - */ -static int nci_uart_default_recv_buf(struct nci_uart *nu, const u8 *data, - char *flags, int count) -{ - int chunk_len; - - if (!nu->ndev) { - nfc_err(nu->tty->dev, - "receive data from tty but no NCI dev is attached yet, drop buffer\n"); - return 0; - } - - /* Decode all incoming data in packets - * and enqueue then for processing. - */ - while (count > 0) { - /* If this is the first data of a packet, allocate a buffer */ - if (!nu->rx_skb) { - nu->rx_packet_len = -1; - nu->rx_skb = nci_skb_alloc(nu->ndev, - NCI_MAX_PACKET_SIZE, - GFP_ATOMIC); - if (!nu->rx_skb) - return -ENOMEM; - } - - /* Eat byte after byte till full packet header is received */ - if (nu->rx_skb->len < NCI_CTRL_HDR_SIZE) { - skb_put_u8(nu->rx_skb, *data++); - --count; - continue; - } - - /* Header was received but packet len was not read */ - if (nu->rx_packet_len < 0) - nu->rx_packet_len = NCI_CTRL_HDR_SIZE + - nci_plen(nu->rx_skb->data); - - /* Compute how many bytes are missing and how many bytes can - * be consumed. - */ - chunk_len = nu->rx_packet_len - nu->rx_skb->len; - if (count < chunk_len) - chunk_len = count; - skb_put_data(nu->rx_skb, data, chunk_len); - data += chunk_len; - count -= chunk_len; - - /* Chcek if packet is fully received */ - if (nu->rx_packet_len == nu->rx_skb->len) { - /* Pass RX packet to driver */ - if (nu->ops.recv(nu, nu->rx_skb) != 0) - nfc_err(nu->tty->dev, "corrupted RX packet\n"); - /* Next packet will be a new one */ - nu->rx_skb = NULL; - } - } - - return 0; -} - -/* -- Default recv handler -- */ -static int nci_uart_default_recv(struct nci_uart *nu, struct sk_buff *skb) -{ - return nci_recv_frame(nu->ndev, skb); -} - int nci_uart_register(struct nci_uart *nu) { if (!nu || !nu->ops.open || @@ -402,12 +396,6 @@ int nci_uart_register(struct nci_uart *nu) /* Set the send callback */ nu->ops.send = nci_uart_send; - /* Install default handlers if not overridden */ - if (!nu->ops.recv_buf) - nu->ops.recv_buf = nci_uart_default_recv_buf; - if (!nu->ops.recv) - nu->ops.recv = nci_uart_default_recv; - /* Add this driver in the driver list */ if (nci_uart_drivers[nu->driver]) { pr_err("driver %d is already registered\n", nu->driver); @@ -453,7 +441,6 @@ void nci_uart_set_config(struct nci_uart *nu, int baudrate, int flow_ctrl) EXPORT_SYMBOL_GPL(nci_uart_set_config); static struct tty_ldisc_ops nci_uart_ldisc = { - .magic = TTY_LDISC_MAGIC, .owner = THIS_MODULE, .name = "n_nci", .open = nci_uart_tty_open, @@ -469,7 +456,6 @@ static struct tty_ldisc_ops nci_uart_ldisc = { static int __init nci_uart_init(void) { - memset(nci_uart_drivers, 0, sizeof(nci_uart_drivers)); return tty_register_ldisc(N_NCI, &nci_uart_ldisc); } diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index 161be8b7d131..61dfa86d444d 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -285,7 +285,6 @@ static void v253_wakeup(struct tty_struct *tty) } struct tty_ldisc_ops v253_ops = { - .magic = TTY_LDISC_MAGIC, .name = "cx20442", .owner = THIS_MODULE, .open = v253_open, diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c index 57feb473a579..98198c7cc872 100644 --- a/sound/soc/ti/ams-delta.c +++ b/sound/soc/ti/ams-delta.c @@ -395,7 +395,6 @@ static void cx81801_wakeup(struct tty_struct *tty) } static struct tty_ldisc_ops cx81801_ops = { - .magic = TTY_LDISC_MAGIC, .name = "cx81801", .owner = THIS_MODULE, .open = cx81801_open,