[PATCH] sky2: cleanup interrupt processing

The receive processing can be cleaned up by not using local variables
to store checksum status, instead just put it directly onto the expected
skb.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
shemminger@osdl.org 2005-09-27 15:02:56 -07:00 committed by Jeff Garzik
parent 6b1a3aefd8
commit d11c13e752

View file

@ -1040,13 +1040,14 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
* NB: the hardware will tell us about partial completion of multi-part
* buffers; these are defered until completion.
*/
static void sky2_tx_complete(struct net_device *dev, u16 done)
static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct net_device *dev = sky2->netdev;
unsigned i;
if (netif_msg_tx_done(sky2))
printk(KERN_DEBUG "%s: tx done, upto %u\n", dev->name, done);
if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done, upto %u\n",
dev->name, done);
spin_lock(&sky2->tx_lock);
@ -1086,7 +1087,7 @@ static void sky2_tx_complete(struct net_device *dev, u16 done)
/* Cleanup all untransmitted buffers, assume transmitter not running */
static inline void sky2_tx_clean(struct sky2_port *sky2)
{
sky2_tx_complete(sky2->netdev, sky2->tx_prod);
sky2_tx_complete(sky2, sky2->tx_prod);
}
/* Network shutdown */
@ -1421,18 +1422,17 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
* For small packets or errors, just reuse existing skb.
* For larger pakects, get new buffer.
*/
static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port,
static struct sk_buff *sky2_receive(struct sky2_port *sky2,
u16 length, u32 status)
{
struct net_device *dev = hw->dev[port];
struct sky2_port *sky2 = netdev_priv(dev);
struct ring_info *re = sky2->rx_ring + sky2->rx_next;
struct sk_buff *skb = NULL;
struct net_device *dev;
const unsigned int bufsize = rx_size(sky2);
if (unlikely(netif_msg_rx_status(sky2)))
printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
dev->name, sky2->rx_next, status, length);
sky2->netdev->name, sky2->rx_next, status, length);
sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
@ -1451,6 +1451,8 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port,
pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr,
length, PCI_DMA_FROMDEVICE);
memcpy(skb->data, re->skb->data, length);
skb->ip_summed = re->skb->ip_summed;
skb->csum = re->skb->csum;
pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr,
length, PCI_DMA_FROMDEVICE);
} else {
@ -1471,12 +1473,14 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port,
re->maplen = bufsize;
}
skb->dev = dev;
skb_put(skb, length);
dev = sky2->netdev;
skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
dev->last_rx = jiffies;
resubmit:
re->skb->ip_summed = CHECKSUM_NONE;
sky2_rx_add(sky2, re);
return skb;
@ -1517,59 +1521,46 @@ static inline u16 tx_index(u8 port, u32 status, u16 len)
* Both ports share the same status interrupt, therefore there is only
* one poll routine.
*/
static int sky2_poll(struct net_device *dev, int *budget)
static int sky2_poll(struct net_device *dev0, int *budget)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
unsigned int to_do = min(dev->quota, *budget);
struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
unsigned int to_do = min(dev0->quota, *budget);
unsigned int work_done = 0;
u16 hwidx;
unsigned char summed[2] = { CHECKSUM_NONE, CHECKSUM_NONE };
unsigned int csum[2];
hwidx = sky2_read16(hw, STAT_PUT_IDX);
BUG_ON(hwidx >= STATUS_RING_SIZE);
rmb();
while (hw->st_idx != hwidx && work_done < to_do) {
struct sky2_status_le *le = hw->st_le + hw->st_idx;
struct sky2_port *sky2;
struct sk_buff *skb;
u8 port;
u32 status;
u16 length;
BUG_ON(le->link >= hw->ports);
sky2 = netdev_priv(hw->dev[le->link]);
status = le32_to_cpu(le->status);
length = le16_to_cpu(le->length);
port = le->link;
BUG_ON(port >= hw->ports || hw->dev[port] == NULL);
switch (le->opcode & ~HW_OWNER) {
case OP_RXSTAT:
skb = sky2_receive(hw, port, length, status);
skb = sky2_receive(sky2, length, status);
if (likely(skb)) {
/* Add hw checksum if available */
skb->ip_summed = summed[port];
skb->csum = csum[port];
netif_receive_skb(skb);
++work_done;
}
/* Clear for next packet */
csum[port] = 0;
summed[port] = CHECKSUM_NONE;
break;
case OP_RXCHKS:
/* Save computed checksum for next rx */
csum[port] = le16_to_cpu(status & 0xffff);
summed[port] = CHECKSUM_HW;
skb = sky2->rx_ring[sky2->rx_next].skb;
skb->ip_summed = CHECKSUM_HW;
skb->csum = le16_to_cpu(status);
break;
case OP_TXINDEXLE:
sky2_tx_complete(hw->dev[port],
tx_index(port, status, length));
sky2_tx_complete(sky2,
tx_index(sky2->port, status, length));
break;
case OP_RXTIMESTAMP:
@ -1599,7 +1590,7 @@ static int sky2_poll(struct net_device *dev, int *budget)
rx_set_put(hw->dev[1]);
*budget -= work_done;
dev->quota -= work_done;
dev0->quota -= work_done;
if (work_done < to_do) {
/*
* Another chip workaround, need to restart TX timer if status
@ -1613,7 +1604,7 @@ static int sky2_poll(struct net_device *dev, int *budget)
hw->intr_mask |= Y2_IS_STAT_BMU;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
sky2_read32(hw, B0_IMSK);
netif_rx_complete(dev);
netif_rx_complete(dev0);
}
return work_done >= to_do;