Merge remote-tracking branches 'spi/topic/adi-v3', 'spi/topic/atmel', 'spi/topic/cleanup' and 'spi/topic/davinci' into spi-next

This commit is contained in:
Mark Brown 2014-08-04 17:21:04 +01:00
11 changed files with 75 additions and 49 deletions

View File

@ -8,7 +8,8 @@ Required properties:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
- reg: Offset and length of SPI controller register space
- num-cs: Number of chip selects
- num-cs: Number of chip selects. This includes internal as well as
GPIO chip selects.
- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
IP to the interrupt controller within the SoC. Possible values
are 0 and 1. Manual says one of the two possible interrupt
@ -17,6 +18,12 @@ Required properties:
- interrupts: interrupt number mapped to CPU.
- clocks: spi clk phandle
Optional:
- cs-gpios: gpio chip selects
For example to have 3 internal CS and 2 GPIO CS, user could define
cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
where first three are internal CS and last two are GPIO CS.
Example of a NOR flash slave device (n25q032) connected to DaVinci
SPI controller device over the SPI bus.

View File

@ -660,10 +660,9 @@ static int adi_spi_setup(struct spi_device *spi)
struct adi_spi3_chip *chip_info = spi->controller_data;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (!chip) {
dev_err(&spi->dev, "can not allocate chip data\n");
if (!chip)
return -ENOMEM;
}
if (chip_info) {
if (chip_info->control & ~ctl_reg) {
dev_err(&spi->dev,

View File

@ -597,21 +597,15 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
goto err_exit;
/* Send both scatterlists */
rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
&as->dma.sgrx,
1,
DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
NULL);
rxdesc = dmaengine_prep_slave_sg(rxchan, &as->dma.sgrx, 1,
DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!rxdesc)
goto err_dma;
txdesc = txchan->device->device_prep_slave_sg(txchan,
&as->dma.sgtx,
1,
DMA_TO_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
NULL);
txdesc = dmaengine_prep_slave_sg(txchan, &as->dma.sgtx, 1,
DMA_TO_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!txdesc)
goto err_dma;
@ -1018,7 +1012,7 @@ static int atmel_spi_setup(struct spi_device *spi)
csr |= SPI_BF(DLYBCT, 0);
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
npcs_pin = (unsigned int)spi->controller_data;
npcs_pin = (unsigned long)spi->controller_data;
if (gpio_is_valid(spi->cs_gpio))
npcs_pin = spi->cs_gpio;
@ -1253,7 +1247,7 @@ msg_done:
static void atmel_spi_cleanup(struct spi_device *spi)
{
struct atmel_spi_device *asd = spi->controller_state;
unsigned gpio = (unsigned) spi->controller_data;
unsigned gpio = (unsigned long) spi->controller_data;
if (!asd)
return;

View File

@ -664,7 +664,7 @@ static int __maybe_unused cdns_spi_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(cdns_spi_dev_pm_ops, cdns_spi_suspend,
cdns_spi_resume);
static struct of_device_id cdns_spi_of_match[] = {
static const struct of_device_id cdns_spi_of_match[] = {
{ .compatible = "xlnx,zynq-spi-r1p6" },
{ .compatible = "cdns,spi-r1p6" },
{ /* end of table */ }

View File

@ -184,8 +184,6 @@ static int spi_clps711x_probe(struct platform_device *pdev)
}
master->max_speed_hz = clk_get_rate(hw->spi_clk);
platform_set_drvdata(pdev, master);
hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3");
if (IS_ERR(hw->syscon)) {
ret = PTR_ERR(hw->syscon);

View File

@ -30,6 +30,7 @@
#include <linux/edma.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
@ -38,8 +39,6 @@
#define SPI_NO_RESOURCE ((resource_size_t)-1)
#define SPI_MAX_CHIPSELECT 2
#define CS_DEFAULT 0xFF
#define SPIFMT_PHASE_MASK BIT(16)
@ -142,7 +141,7 @@ struct davinci_spi {
void (*get_rx)(u32 rx_data, struct davinci_spi *);
u32 (*get_tx)(struct davinci_spi *);
u8 bytes_per_word[SPI_MAX_CHIPSELECT];
u8 *bytes_per_word;
};
static struct davinci_spi_config davinci_spi_default_cfg;
@ -213,13 +212,16 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
u8 chip_sel = spi->chip_select;
u16 spidat1 = CS_DEFAULT;
bool gpio_chipsel = false;
int gpio;
dspi = spi_master_get_devdata(spi->master);
pdata = &dspi->pdata;
if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
if (spi->cs_gpio >= 0) {
/* SPI core parse and update master->cs_gpio */
gpio_chipsel = true;
gpio = spi->cs_gpio;
}
/*
* Board specific chip select logic decides the polarity and cs
@ -227,9 +229,9 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
*/
if (gpio_chipsel) {
if (value == BITBANG_CS_ACTIVE)
gpio_set_value(pdata->chip_sel[chip_sel], 0);
gpio_set_value(gpio, spi->mode & SPI_CS_HIGH);
else
gpio_set_value(pdata->chip_sel[chip_sel], 1);
gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH));
} else {
if (value == BITBANG_CS_ACTIVE) {
spidat1 |= SPIDAT1_CSHOLD_MASK;
@ -392,17 +394,40 @@ static int davinci_spi_setup(struct spi_device *spi)
int retval = 0;
struct davinci_spi *dspi;
struct davinci_spi_platform_data *pdata;
struct spi_master *master = spi->master;
struct device_node *np = spi->dev.of_node;
bool internal_cs = true;
unsigned long flags = GPIOF_DIR_OUT;
dspi = spi_master_get_devdata(spi->master);
pdata = &dspi->pdata;
if (!(spi->mode & SPI_NO_CS)) {
if ((pdata->chip_sel == NULL) ||
(pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
flags |= (spi->mode & SPI_CS_HIGH) ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
if (!(spi->mode & SPI_NO_CS)) {
if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) {
retval = gpio_request_one(spi->cs_gpio,
flags, dev_name(&spi->dev));
internal_cs = false;
} else if (pdata->chip_sel &&
spi->chip_select < pdata->num_chipselect &&
pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) {
spi->cs_gpio = pdata->chip_sel[spi->chip_select];
retval = gpio_request_one(spi->cs_gpio,
flags, dev_name(&spi->dev));
internal_cs = false;
}
}
if (retval) {
dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
spi->cs_gpio, retval);
return retval;
}
if (internal_cs)
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
if (spi->mode & SPI_READY)
set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
@ -414,6 +439,12 @@ static int davinci_spi_setup(struct spi_device *spi)
return retval;
}
static void davinci_spi_cleanup(struct spi_device *spi)
{
if (spi->cs_gpio >= 0)
gpio_free(spi->cs_gpio);
}
static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
{
struct device *sdev = dspi->bitbang.master->dev.parent;
@ -812,6 +843,8 @@ static int spi_davinci_get_pdata(struct platform_device *pdev,
/*
* default num_cs is 1 and all chipsel are internal to the chip
* indicated by chip_sel being NULL or cs_gpios being NULL or
* set to -ENOENT. num-cs includes internal as well as gpios.
* indicated by chip_sel being NULL. GPIO based CS is not
* supported yet in DT bindings.
*/
@ -850,7 +883,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
struct resource *r;
resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
resource_size_t dma_tx_chan = SPI_NO_RESOURCE;
int i = 0, ret = 0;
int ret = 0;
u32 spipc0;
master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
@ -876,6 +909,14 @@ static int davinci_spi_probe(struct platform_device *pdev)
/* pdata in dspi is now updated and point pdata to that */
pdata = &dspi->pdata;
dspi->bytes_per_word = devm_kzalloc(&pdev->dev,
sizeof(*dspi->bytes_per_word) *
pdata->num_chipselect, GFP_KERNEL);
if (dspi->bytes_per_word == NULL) {
ret = -ENOMEM;
goto free_master;
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
ret = -ENOENT;
@ -915,6 +956,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
master->num_chipselect = pdata->num_chipselect;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
master->setup = davinci_spi_setup;
master->cleanup = davinci_spi_cleanup;
dspi->bitbang.chipselect = davinci_spi_chipselect;
dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
@ -962,14 +1004,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
iowrite32(spipc0, dspi->base + SPIPC0);
/* initialize chip selects */
if (pdata->chip_sel) {
for (i = 0; i < pdata->num_chipselect; i++) {
if (pdata->chip_sel[i] != SPI_INTERN_CS)
gpio_direction_output(pdata->chip_sel[i], 1);
}
}
if (pdata->intr_line)
iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
else

View File

@ -425,8 +425,6 @@ static int falcon_sflash_probe(struct platform_device *pdev)
master->unprepare_transfer_hardware = falcon_sflash_unprepare_xfer;
master->dev.of_node = pdev->dev.of_node;
platform_set_drvdata(pdev, priv);
ret = devm_spi_register_master(&pdev->dev, master);
if (ret)
spi_master_put(master);

View File

@ -58,7 +58,7 @@ static struct fsl_spi_match_data of_fsl_spi_grlib_config = {
.type = TYPE_GRLIB,
};
static struct of_device_id of_fsl_spi_match[] = {
static const struct of_device_id of_fsl_spi_match[] = {
{
.compatible = "fsl,spi",
.data = &of_fsl_spi_fsl_config,

View File

@ -420,8 +420,6 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
platform_set_drvdata(pdev, master);
spi100k = spi_master_get_devdata(master);
/*

View File

@ -304,7 +304,7 @@ static int hspi_remove(struct platform_device *pdev)
return 0;
}
static struct of_device_id hspi_of_match[] = {
static const struct of_device_id hspi_of_match[] = {
{ .compatible = "renesas,hspi", },
{ /* sentinel */ }
};

View File

@ -680,8 +680,6 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
p = spi_master_get_devdata(master);
platform_set_drvdata(pdev, p);
of_id = of_match_device(sh_msiof_match, &pdev->dev);
if (of_id) {
p->chipdata = of_id->data;