From d147085183ea1b0efd2c18fca76e4dee873b1e4e Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Tue, 15 Aug 2023 10:01:11 -0700 Subject: [PATCH] e1000e: Use PME poll to circumvent unreliable ACPI wake On some I219 devices, ethernet cable plugging detection only works once from PCI D3 state. Subsequent cable plugging does set PME bit correctly, but device still doesn't get woken up. Since I219 connects to the root complex directly, it relies on platform firmware (ACPI) to wake it up. In this case, the GPE from _PRW only works for first cable plugging but fails to notify the driver for subsequent plugging events. The issue was originally found on CNP, but the same issue can be found on ADL too. So workaround the issue by continuing use PME poll after first ACPI wake. As PME poll is always used, the runtime suspend restriction for CNP can also be removed. Signed-off-by: Kai-Heng Feng Tested-by: Naama Meir Acked-by: Sasha Neftin Reviewed-by: Simon Horman Reviewed-by: Leon Romanovsky Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/netdev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 771a3c909c45..18a5e73b8680 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -7021,6 +7021,8 @@ static __maybe_unused int e1000e_pm_runtime_resume(struct device *dev) struct e1000_adapter *adapter = netdev_priv(netdev); int rc; + pdev->pme_poll = true; + rc = __e1000_resume(pdev); if (rc) return rc; @@ -7682,7 +7684,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE); - if (pci_dev_run_wake(pdev) && hw->mac.type != e1000_pch_cnp) + if (pci_dev_run_wake(pdev)) pm_runtime_put_noidle(&pdev->dev); return 0;