dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup

[ Upstream commit bbcc1c83f3 ]

The Linked list element and pointer are not stored in the same memory as
the eDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred.

Fixes: 7e4b8a4fbe ("dmaengine: Add Synopsys eDMA IP version 0 support")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-6-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Kory Maincent 2024-01-29 17:26:02 +01:00 committed by Greg Kroah-Hartman
parent 227ef58a9b
commit d24fe6d5a1

View file

@ -346,6 +346,20 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
dw_edma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
}
static void dw_edma_v0_sync_ll_data(struct dw_edma_chunk *chunk)
{
/*
* In case of remote eDMA engine setup, the DW PCIe RP/EP internal
* configuration registers and application memory are normally accessed
* over different buses. Ensure LL-data reaches the memory before the
* doorbell register is toggled by issuing the dummy-read from the remote
* LL memory in a hope that the MRd TLP will return only after the
* last MWr TLP is completed
*/
if (!(chunk->chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
readl(chunk->ll_region.vaddr.io);
}
static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
{
struct dw_edma_chan *chan = chunk->chan;
@ -412,6 +426,9 @@ static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
SET_CH_32(dw, chan->dir, chan->id, llp.msb,
upper_32_bits(chunk->ll_region.paddr));
}
dw_edma_v0_sync_ll_data(chunk);
/* Doorbell */
SET_RW_32(dw, chan->dir, doorbell,
FIELD_PREP(EDMA_V0_DOORBELL_CH_MASK, chan->id));