Sysace: Don't enable IRQ until after interrupt handler is registered

The previous patch to move the interrupt handler registration moved it
below enabling interrupts which could be a problem if the device is on
a shared interrupt line.  This patch fixes the order.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This commit is contained in:
Grant Likely 2007-10-04 08:52:40 +02:00 committed by Jens Axboe
parent b5515d86f2
commit d2bbf3da37

View file

@ -1005,11 +1005,6 @@ static int __devinit ace_setup(struct ace_device *ace)
ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE |
ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ);
/* Enable interrupts */
val = ace_in(ace, ACE_CTRL);
val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
ace_out(ace, ACE_CTRL, val);
/* Now we can hook up the irq handler */
if (ace->irq != NO_IRQ) {
rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace);
@ -1020,6 +1015,11 @@ static int __devinit ace_setup(struct ace_device *ace)
}
}
/* Enable interrupts */
val = ace_in(ace, ACE_CTRL);
val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
ace_out(ace, ACE_CTRL, val);
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);