mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-01 06:33:07 +00:00
Code Issues Releases Wiki Activity

scsi: lpfc: Fix auto sli_mode and its effect on CONFIG_PORT for SLI3

Browse source 
A very long time ago, there was a feature: auto sli mode. It gave the user
the ability to auto select the SLI mode (SLI2 or SLI3) to run the port in,
or even force SLI2 mode if configured.  Because of the convoluted logic,
the CONFIG_PORT mbox command ends up being called 2 or 3 times. It should
have been called only once.  Additionally, the driver no longer supports
SLI-2, so only SLI-3 mode should be allowed.

The following changes were made:

 - Force module parameter to SLI3 only.

 - Rip out redundant CONFIG_PORT mbox commands.

 - Force CONFIG_PORT mbox command to be in beginning of enable ISR routine.

 - Added changes for offline to online behavior

Link: https://lore.kernel.org/r/20210104180240.46824-3-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
James Smart 2021-01-04 10:02:27 -08:00 committed by Martin K. Petersen
parent 8e062ce305
commit d2f2547efd
4 changed files with 26 additions and 48 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
drivers/scsi/lpfc/lpfc.h
View file

@ -779,6 +779,7 @@ struct lpfc_hba {
*/
#define HBA_FLOGI_ISSUED 0x100000 /* FLOGI was issued */
#define HBA_DEFER_FLOGI 0x800000 /* Defer FLOGI till read_sparm cmpl */
#define HBA_NEEDS_CFG_PORT 0x2000000 /* SLI3 - needs a CONFIG_PORT mbox */
uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
struct lpfc_dmabuf slim2p;

7
drivers/scsi/lpfc/lpfc_attr.c
View file

@ -3441,11 +3441,8 @@ unsigned long lpfc_no_hba_reset[MAX_HBAS_NO_RESET] = {
module_param_array(lpfc_no_hba_reset, ulong, &lpfc_no_hba_reset_cnt, 0444);
MODULE_PARM_DESC(lpfc_no_hba_reset, "WWPN of HBAs that should not be reset");
LPFC_ATTR(sli_mode, 0, 0, 3,
"SLI mode selector:"
" 0 - auto (SLI-3 if supported),"
" 2 - select SLI-2 even on SLI-3 capable HBAs,"
" 3 - select SLI-3");
LPFC_ATTR(sli_mode, 3, 3, 3,
"SLI mode selector: 3 - select SLI-3");
LPFC_ATTR_R(enable_npiv, 1, 0, 1,
"Enable NPIV functionality");

20
drivers/scsi/lpfc/lpfc_init.c
View file

@ -10728,17 +10728,19 @@ lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
uint32_t intr_mode = LPFC_INTR_ERROR;
int retval;
/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
if (retval)
return intr_mode;
phba->hba_flag &= ~HBA_NEEDS_CFG_PORT;
if (cfg_mode == 2) {
/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
/* Now, try to enable MSI-X interrupt mode */
retval = lpfc_sli_enable_msix(phba);
if (!retval) {
/* Now, try to enable MSI-X interrupt mode */
retval = lpfc_sli_enable_msix(phba);
if (!retval) {
/* Indicate initialization to MSI-X mode */
phba->intr_type = MSIX;
intr_mode = 2;
}
/* Indicate initialization to MSI-X mode */
phba->intr_type = MSIX;
intr_mode = 2;
}
}

46
drivers/scsi/lpfc/lpfc_sli.c
View file

@ -4359,6 +4359,8 @@ lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
if (lpfc_readl(phba->HSregaddr, &status))
return 1;
phba->hba_flag |= HBA_NEEDS_CFG_PORT;
/*
* Check status register every 100ms for 5 retries, then every
* 500ms for 5, then every 2.5 sec for 5, then reset board and
@ -4687,6 +4689,7 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
/* perform board reset */
phba->fc_eventTag = 0;
phba->link_events = 0;
phba->hba_flag |= HBA_NEEDS_CFG_PORT;
if (phba->pport) {
phba->pport->fc_myDID = 0;
phba->pport->fc_prevDID = 0;
@ -5020,6 +5023,8 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba)
return -EIO;
}
phba->hba_flag |= HBA_NEEDS_CFG_PORT;
/* Clear all interrupt enable conditions */
writel(0, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
@ -5316,45 +5321,18 @@ int
lpfc_sli_hba_setup(struct lpfc_hba *phba)
{
uint32_t rc;
int mode = 3, i;
int i;
int longs;
switch (phba->cfg_sli_mode) {
case 2:
if (phba->cfg_enable_npiv) {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"1824 NPIV enabled: Override sli_mode "
"parameter (%d) to auto (0).\n",
phba->cfg_sli_mode);
break;
}
mode = 2;
break;
case 0:
case 3:
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"1819 Unrecognized sli_mode parameter: %d.\n",
phba->cfg_sli_mode);
break;
/* Enable ISR already does config_port because of config_msi mbx */
if (phba->hba_flag & HBA_NEEDS_CFG_PORT) {
rc = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
if (rc)
return -EIO;
phba->hba_flag &= ~HBA_NEEDS_CFG_PORT;
}
phba->fcp_embed_io = 0; /* SLI4 FC support only */
rc = lpfc_sli_config_port(phba, mode);
if (rc && phba->cfg_sli_mode == 3)
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"1820 Unable to select SLI-3. "
"Not supported by adapter.\n");
if (rc && mode != 2)
rc = lpfc_sli_config_port(phba, 2);
else if (rc && mode == 2)
rc = lpfc_sli_config_port(phba, 3);
if (rc)
goto lpfc_sli_hba_setup_error;
/* Enable PCIe device Advanced Error Reporting (AER) if configured */
if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
rc = pci_enable_pcie_error_reporting(phba->pcidev);