Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.

The rest were (relatively) trivial in nature.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2019-11-02 13:12:51 -07:00
commit d31e95585c
623 changed files with 5924 additions and 3539 deletions

View File

@ -196,7 +196,8 @@ Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Patrick Mochel <mochel@digitalimplant.org>
Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
Paul Burton <paulburton@kernel.org> <paul.burton@mips.com>
Peter A Jonsson <pj@ludd.ltu.se>
Peter Oruba <peter@oruba.de>
Peter Oruba <peter.oruba@amd.com>
@ -229,6 +230,7 @@ Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
Shuah Khan <shuah@kernel.org> <shuahkh@osg.samsung.com>
Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
Simon Arlott <simon@octiron.net> <simon@fire.lp0.eu>
Simon Kelley <simon@thekelleys.org.uk>
Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
Stephen Hemminger <shemminger@osdl.org>

View File

@ -91,6 +91,11 @@ stable kernels.
| ARM | MMU-500 | #841119,826419 | N/A |
+----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
| Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_845719 |
+----------------+-----------------+-----------------+-----------------------------+
| Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_843419 |
+----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX ITS | #22375,24313 | CAVIUM_ERRATUM_22375 |
+----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 |
@ -126,7 +131,7 @@ stable kernels.
+----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 |
+----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
| Qualcomm Tech. | Kryo/Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
+----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 |
+----------------+-----------------+-----------------+-----------------------------+

View File

@ -496,12 +496,12 @@ properties:
- description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
items:
- const: tsd,rk3368-uq7-haikou
- const: tsd,rk3368-lion-haikou
- const: rockchip,rk3368
- description: Theobroma Systems RK3399-Q7 with Haikou baseboard
items:
- const: tsd,rk3399-q7-haikou
- const: tsd,rk3399-puma-haikou
- const: rockchip,rk3399
- description: Tronsmart Orion R68 Meta

View File

@ -1,8 +1,11 @@
* Advanced Interrupt Controller (AIC)
Required properties:
- compatible: Should be "atmel,<chip>-aic"
<chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
- compatible: Should be:
- "atmel,<chip>-aic" where <chip> can be "at91rm9200", "sama5d2",
"sama5d3" or "sama5d4"
- "microchip,<chip>-aic" where <chip> can be "sam9x60"
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).

View File

@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml#
$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
@ -27,14 +27,12 @@ properties:
clocks:
items:
- description: The CSI interface clock
- description: The CSI module clock
- description: The CSI ISP clock
- description: The CSI DRAM clock
clock-names:
items:
- const: bus
- const: mod
- const: isp
- const: ram
@ -89,9 +87,8 @@ examples:
compatible = "allwinner,sun7i-a20-csi0";
reg = <0x01c09000 0x1000>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
<&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
clock-names = "bus", "mod", "isp", "ram";
clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
clock-names = "bus", "isp", "ram";
resets = <&ccu RST_CSI0>;
port {

View File

@ -33,13 +33,13 @@ patternProperties:
allOf:
- $ref: "/schemas/types.yaml#/definitions/string"
- enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1,
GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2,
GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12,
I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7,
I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC,
LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
@ -48,47 +48,45 @@ patternProperties:
PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
SALT6, SALT7, SALT8, SALT9, SD1, SD2, SD3, SD3DAT4, SD3DAT5,
SD3DAT6, SD3DAT7, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO,
SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1,
SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5,
TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1,
TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, UART6, UART7,
UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
WDTRST4, ]
SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
WDTRST3, WDTRST4, ]
groups:
allOf:
- $ref: "/schemas/types.yaml#/definitions/string"
- enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, GPIT0,
GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1,
I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3,
I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6,
JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3,
MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1,
NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE,
PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, PWM12G1,
PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM3,
PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1,
SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1,
SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1,
SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9G0,
SALT9G1, SD1, SD2, SD3, SD3DAT4, SD3DAT5, SD3DAT6, SD3DAT7,
SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD,
SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13,
TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8,
TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4,
UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
WDTRST4, ]
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB,
VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
required:
- compatible

View File

@ -30,8 +30,8 @@ if:
properties:
compatible:
enum:
- const: regulator-fixed
- const: regulator-fixed-clock
- regulator-fixed
- regulator-fixed-clock
regulator-name: true

View File

@ -24,15 +24,17 @@ description: |
properties:
compatible:
items:
- enum:
- sifive,rocket0
- sifive,e5
- sifive,e51
- sifive,u54-mc
- sifive,u54
- sifive,u5
- const: riscv
oneOf:
- items:
- enum:
- sifive,rocket0
- sifive,e5
- sifive,e51
- sifive,u54-mc
- sifive,u54
- sifive,u5
- const: riscv
- const: riscv # Simulator only
description:
Identifies that the hart uses the RISC-V instruction set
and identifies the type of the hart.
@ -66,12 +68,8 @@ properties:
insensitive, letters in the riscv,isa string must be all
lowercase to simplify parsing.
timebase-frequency:
type: integer
minimum: 1
description:
Specifies the clock frequency of the system timer in Hz.
This value is common to all harts on a single system image.
# RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
timebase-frequency: false
interrupt-controller:
type: object
@ -93,7 +91,6 @@ properties:
required:
- riscv,isa
- timebase-frequency
- interrupt-controller
examples:

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
==============================================================
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
==============================================================
=============================================================
Linux Base Driver for the Intel(R) PRO/100 Family of Adapters
=============================================================
June 1, 2018
@ -21,7 +21,7 @@ Contents
In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
This file describes the Linux Base Driver for the Intel(R) PRO/100 Family of
Adapters. This driver includes support for Itanium(R)2-based systems.
For questions related to hardware requirements, refer to the documentation
@ -138,9 +138,9 @@ version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
https://www.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
WoL is provided through the ethtool* utility. For instructions on
Enabling Wake on LAN (WoL)
--------------------------
WoL is provided through the ethtool utility. For instructions on
enabling WoL with ethtool, refer to the ethtool man page. WoL will be
enabled on the system during the next shut down or reboot. For this
driver version, in order to enable WoL, the e100 driver must be loaded

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
===========================================================
Linux* Base Driver for Intel(R) Ethernet Network Connection
===========================================================
==========================================================
Linux Base Driver for Intel(R) Ethernet Network Connection
==========================================================
Intel Gigabit Linux driver.
Copyright(c) 1999 - 2013 Intel Corporation.
@ -438,10 +438,10 @@ ethtool
The latest release of ethtool can be found from
https://www.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
Enabling Wake on LAN (WoL)
--------------------------
WoL is configured through the ethtool* utility.
WoL is configured through the ethtool utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
======================================================
Linux* Driver for Intel(R) Ethernet Network Connection
======================================================
=====================================================
Linux Driver for Intel(R) Ethernet Network Connection
=====================================================
Intel Gigabit Linux driver.
Copyright(c) 2008-2018 Intel Corporation.
@ -338,7 +338,7 @@ and higher cannot be forced. Use the autonegotiation advertising setting to
manually set devices for 1 Gbps and higher.
Speed, duplex, and autonegotiation advertising are configured through the
ethtool* utility.
ethtool utility.
Caution: Only experienced network administrators should force speed and duplex
or change autonegotiation advertising manually. The settings at the switch must
@ -351,9 +351,9 @@ will not attempt to auto-negotiate with its link partner since those adapters
operate only in full duplex and only at their native speed.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the ethtool* utility.
Enabling Wake on LAN (WoL)
--------------------------
WoL is configured through the ethtool utility.
WoL will be enabled on the system during the next shut down or reboot. For
this driver version, in order to enable WoL, the e1000e driver must be loaded

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
==============================================================
Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
==============================================================
=============================================================
Linux Base Driver for Intel(R) Ethernet Multi-host Controller
=============================================================
August 20, 2018
Copyright(c) 2015-2018 Intel Corporation.
@ -120,8 +120,8 @@ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
Known Issues/Troubleshooting
============================
Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
---------------------------------------------------------------------------------------
Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS under Linux KVM
-------------------------------------------------------------------------------------
KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
includes traditional PCIe devices, as well as SR-IOV-capable devices based on
the Intel Ethernet Controller XL710.

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
==================================================================
Linux* Base Driver for the Intel(R) Ethernet Controller 700 Series
==================================================================
=================================================================
Linux Base Driver for the Intel(R) Ethernet Controller 700 Series
=================================================================
Intel 40 Gigabit Linux driver.
Copyright(c) 1999-2018 Intel Corporation.
@ -384,7 +384,7 @@ NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet
Network Adapter XXV710 based devices.
Speed, duplex, and autonegotiation advertising are configured through the
ethtool* utility.
ethtool utility.
Caution: Only experienced network administrators should force speed and duplex
or change autonegotiation advertising manually. The settings at the switch must

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
==================================================================
Linux* Base Driver for Intel(R) Ethernet Adaptive Virtual Function
==================================================================
=================================================================
Linux Base Driver for Intel(R) Ethernet Adaptive Virtual Function
=================================================================
Intel Ethernet Adaptive Virtual Function Linux driver.
Copyright(c) 2013-2018 Intel Corporation.
@ -19,7 +19,7 @@ Contents
Overview
========
This file describes the iavf Linux* Base Driver. This driver was formerly
This file describes the iavf Linux Base Driver. This driver was formerly
called i40evf.
The iavf driver supports the below mentioned virtual function devices and

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
===================================================================
Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series
===================================================================
==================================================================
Linux Base Driver for the Intel(R) Ethernet Connection E800 Series
==================================================================
Intel ice Linux driver.
Copyright(c) 2018 Intel Corporation.

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
===========================================================
Linux* Base Driver for Intel(R) Ethernet Network Connection
===========================================================
==========================================================
Linux Base Driver for Intel(R) Ethernet Network Connection
==========================================================
Intel Gigabit Linux driver.
Copyright(c) 1999-2018 Intel Corporation.
@ -129,9 +129,9 @@ version is required for this functionality. Download it at:
https://www.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the ethtool* utility.
Enabling Wake on LAN (WoL)
--------------------------
WoL is configured through the ethtool utility.
WoL will be enabled on the system during the next shut down or reboot. For
this driver version, in order to enable WoL, the igb driver must be loaded

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
============================================================
Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet
============================================================
===========================================================
Linux Base Virtual Function Driver for Intel(R) 1G Ethernet
===========================================================
Intel Gigabit Virtual Function Linux driver.
Copyright(c) 1999-2018 Intel Corporation.

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
=============================================================================
Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
=============================================================================
===========================================================================
Linux Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
===========================================================================
Intel 10 Gigabit Linux driver.
Copyright(c) 1999-2018 Intel Corporation.
@ -519,8 +519,8 @@ The offload is also supported for ixgbe's VFs, but the VF must be set as
Known Issues/Troubleshooting
============================
Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS
-----------------------------------------------------------------------
Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS
---------------------------------------------------------------------
Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.
This includes traditional PCIe devices, as well as SR-IOV-capable devices based
on the Intel Ethernet Controller XL710.

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
=============================================================
Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet
=============================================================
============================================================
Linux Base Virtual Function Driver for Intel(R) 10G Ethernet
============================================================
Intel 10 Gigabit Virtual Function Linux driver.
Copyright(c) 1999-2018 Intel Corporation.

View File

@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0+
==========================================================
Linux* Driver for the Pensando(R) Ethernet adapter family
==========================================================
========================================================
Linux Driver for the Pensando(R) Ethernet adapter family
========================================================
Pensando Linux Ethernet driver.
Copyright(c) 2019 Pensando Systems, Inc

View File

@ -207,8 +207,8 @@ TCP variables:
somaxconn - INTEGER
Limit of socket listen() backlog, known in userspace as SOMAXCONN.
Defaults to 128. See also tcp_max_syn_backlog for additional tuning
for TCP sockets.
Defaults to 4096. (Was 128 before linux-5.4)
See also tcp_max_syn_backlog for additional tuning for TCP sockets.
tcp_abort_on_overflow - BOOLEAN
If listening service is too slow to accept new connections,
@ -408,11 +408,14 @@ tcp_max_orphans - INTEGER
up to ~64K of unswappable memory.
tcp_max_syn_backlog - INTEGER
Maximal number of remembered connection requests, which have not
received an acknowledgment from connecting client.
Maximal number of remembered connection requests (SYN_RECV),
which have not received an acknowledgment from connecting client.
This is a per-listener limit.
The minimal value is 128 for low memory machines, and it will
increase in proportion to the memory of machine.
If server suffers from overload, try increasing this number.
Remember to also check /proc/sys/net/core/somaxconn
A SYN_RECV request socket consumes about 304 bytes of memory.
tcp_max_tw_buckets - INTEGER
Maximal number of timewait sockets held by system simultaneously.

View File

@ -2330,11 +2330,13 @@ F: drivers/edac/altera_edac.
ARM/SPREADTRUM SoC SUPPORT
M: Orson Zhai <orsonzhai@gmail.com>
M: Baolin Wang <baolin.wang@linaro.org>
M: Baolin Wang <baolin.wang7@gmail.com>
M: Chunyan Zhang <zhang.lyra@gmail.com>
S: Maintained
F: arch/arm64/boot/dts/sprd
N: sprd
N: sc27xx
N: sc2731
ARM/STI ARCHITECTURE
M: Patrice Chotard <patrice.chotard@st.com>
@ -3103,7 +3105,7 @@ S: Supported
F: arch/arm64/net/
BPF JIT for MIPS (32-BIT AND 64-BIT)
M: Paul Burton <paul.burton@mips.com>
M: Paul Burton <paulburton@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
@ -3190,7 +3192,7 @@ N: bcm216*
N: kona
F: arch/arm/mach-bcm/
BROADCOM BCM2835 ARM ARCHITECTURE
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
M: Eric Anholt <eric@anholt.net>
M: Stefan Wahren <wahrenst@gmx.net>
L: bcm-kernel-feedback-list@broadcom.com
@ -3198,6 +3200,7 @@ L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/anholt/linux
S: Maintained
N: bcm2711
N: bcm2835
F: drivers/staging/vc04_services
@ -3244,8 +3247,6 @@ S: Maintained
F: drivers/usb/gadget/udc/bcm63xx_udc.*
BROADCOM BCM7XXX ARM ARCHITECTURE
M: Brian Norris <computersforpeace@gmail.com>
M: Gregory Fong <gregory.0xf0@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -8012,7 +8013,7 @@ S: Maintained
F: drivers/usb/atm/ueagle-atm.c
IMGTEC ASCII LCD DRIVER
M: Paul Burton <paul.burton@mips.com>
M: Paul Burton <paulburton@kernel.org>
S: Maintained
F: Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
F: drivers/auxdisplay/img-ascii-lcd.c
@ -10840,7 +10841,7 @@ F: drivers/usb/image/microtek.*
MIPS
M: Ralf Baechle <ralf@linux-mips.org>
M: Paul Burton <paul.burton@mips.com>
M: Paul Burton <paulburton@kernel.org>
M: James Hogan <jhogan@kernel.org>
L: linux-mips@vger.kernel.org
W: http://www.linux-mips.org/
@ -10854,7 +10855,7 @@ F: arch/mips/
F: drivers/platform/mips/
MIPS BOSTON DEVELOPMENT BOARD
M: Paul Burton <paul.burton@mips.com>
M: Paul Burton <paulburton@kernel.org>
L: linux-mips@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/clock/img,boston-clock.txt
@ -10864,7 +10865,7 @@ F: drivers/clk/imgtec/clk-boston.c
F: include/dt-bindings/clock/boston-clock.h
MIPS GENERIC PLATFORM
M: Paul Burton <paul.burton@mips.com>
M: Paul Burton <paulburton@kernel.org>
L: linux-mips@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/power/mti,mips-cpc.txt
@ -11419,7 +11420,6 @@ F: include/trace/events/tcp.h
NETWORKING [TLS]
M: Boris Pismenny <borisp@mellanox.com>
M: Aviad Yehezkel <aviadye@mellanox.com>
M: Dave Watson <davejwatson@fb.com>
M: John Fastabend <john.fastabend@gmail.com>
M: Daniel Borkmann <daniel@iogearbox.net>
M: Jakub Kicinski <jakub.kicinski@netronome.com>
@ -13917,7 +13917,7 @@ F: drivers/mtd/nand/raw/r852.h
RISC-V ARCHITECTURE
M: Paul Walmsley <paul.walmsley@sifive.com>
M: Palmer Dabbelt <palmer@sifive.com>
M: Palmer Dabbelt <palmer@dabbelt.com>
M: Albert Ou <aou@eecs.berkeley.edu>
L: linux-riscv@lists.infradead.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
@ -14794,7 +14794,7 @@ F: drivers/media/usb/siano/
F: drivers/media/mmc/siano/
SIFIVE DRIVERS
M: Palmer Dabbelt <palmer@sifive.com>
M: Palmer Dabbelt <palmer@dabbelt.com>
M: Paul Walmsley <paul.walmsley@sifive.com>
L: linux-riscv@lists.infradead.org
T: git git://github.com/sifive/riscv-linux.git
@ -14804,7 +14804,7 @@ N: sifive
SIFIVE FU540 SYSTEM-ON-CHIP
M: Paul Walmsley <paul.walmsley@sifive.com>
M: Palmer Dabbelt <palmer@sifive.com>
M: Palmer Dabbelt <palmer@dabbelt.com>
L: linux-riscv@lists.infradead.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pjw/sifive.git
S: Supported

View File

@ -2,8 +2,8 @@
VERSION = 5
PATCHLEVEL = 4
SUBLEVEL = 0
EXTRAVERSION = -rc3
NAME = Nesting Opossum
EXTRAVERSION = -rc5
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@ -1037,7 +1037,7 @@ export KBUILD_VMLINUX_OBJS := $(head-y) $(init-y) $(core-y) $(libs-y2) \
export KBUILD_VMLINUX_LIBS := $(libs-y1)
export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
export LDFLAGS_vmlinux
# used by scripts/package/Makefile
# used by scripts/Makefile.package
export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools)
vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)

View File

@ -65,6 +65,14 @@
clock-frequency = <33333333>;
};
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5v0-supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
cpu_intc: cpu-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
@ -264,6 +272,21 @@
clocks = <&input_clk>;
cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
<&creg_gpio 1 GPIO_ACTIVE_LOW>;
spi-flash@0 {
compatible = "sst26wf016b", "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <4000000>;
};
adc@1 {
compatible = "ti,adc108s102";
reg = <1>;
vref-supply = <&reg_5v0>;
spi-max-frequency = <1000000>;
};
};
creg_gpio: gpio@14b0 {

View File

@ -32,6 +32,8 @@ CONFIG_INET=y
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_SPI_NOR=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
@ -55,6 +57,8 @@ CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_SNPS_CREG=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
# CONFIG_DRM_FBDEV_EMULATION is not set
CONFIG_DRM_UDL=y
@ -72,6 +76,8 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
CONFIG_DMADEVICES=y
CONFIG_DW_AXI_DMAC=y
CONFIG_IIO=y
CONFIG_TI_ADC108S102=y
CONFIG_EXT3_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y

View File

@ -614,8 +614,8 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
/* loop thru all available h/w condition indexes */
for (i = 0; i < cc_bcr.c; i++) {
write_aux_reg(ARC_REG_CC_INDEX, i);
cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0);
cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1);
cc_name.indiv.word0 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME0));
cc_name.indiv.word1 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME1));
arc_pmu_map_hw_event(i, cc_name.str);
arc_pmu_add_raw_event_attr(i, cc_name.str);

View File

@ -111,13 +111,13 @@
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c@0 {
/* FMC A */
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
i2c-mux-idle-disconnect;
};
i2c@1 {
@ -125,7 +125,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
i2c-mux-idle-disconnect;
};
i2c@2 {
@ -133,7 +132,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
i2c-mux-idle-disconnect;
};
i2c@3 {
@ -141,7 +139,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
i2c-mux-idle-disconnect;
};
i2c@4 {
@ -149,14 +146,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
i2c-mux-idle-disconnect;
};
i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
i2c-mux-idle-disconnect;
ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
@ -182,14 +177,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
i2c-mux-idle-disconnect;
};
i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
i2c-mux-idle-disconnect;
u41: pca9575@20 {
compatible = "nxp,pca9575";

View File

@ -113,6 +113,7 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
bus-width = <4>;
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
status = "okay";

View File

@ -9,6 +9,14 @@
reg = <0 0x40000000>;
};
leds {
/*
* Since there is no upstream GPIO driver yet,
* remove the incomplete node.
*/
/delete-node/ act;
};
reg_3v3: fixed-regulator {
compatible = "regulator-fixed";
regulator-name = "3V3";

View File

@ -207,6 +207,10 @@
vin-supply = <&sw1c_reg>;
};
&snvs_poweroff {
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;

View File

@ -448,7 +448,7 @@
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302d0000 0x10000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
<&clks IMX7D_GPT1_ROOT_CLK>;
clock-names = "ipg", "per";
};
@ -457,7 +457,7 @@
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302e0000 0x10000>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
<&clks IMX7D_GPT2_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
@ -467,7 +467,7 @@
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302f0000 0x10000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
<&clks IMX7D_GPT3_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
@ -477,7 +477,7 @@
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x30300000 0x10000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
<&clks IMX7D_GPT4_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";

View File

@ -192,3 +192,7 @@
&twl_gpio {
ti,use-leds;
};
&twl_keypad {
status = "disabled";
};

View File

@ -369,7 +369,7 @@
compatible = "ti,wl1285", "ti,wl1283";
reg = <2>;
/* gpio_100 with gpmc_wait2 pad as wakeirq */
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
<&omap4_pmx_core 0x4e>;
interrupt-names = "irq", "wakeup";
ref-clock-frequency = <26000000>;

View File

@ -474,7 +474,7 @@
compatible = "ti,wl1271";
reg = <2>;
/* gpio_53 with gpmc_ncs3 pad as wakeup */
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
<&omap4_pmx_core 0x3a>;
interrupt-names = "irq", "wakeup";
ref-clock-frequency = <38400000>;

View File

@ -512,7 +512,7 @@
compatible = "ti,wl1281";
reg = <2>;
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};

View File

@ -69,7 +69,7 @@
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
ref-clock-frequency = <38400000>;
};
};

View File

@ -362,7 +362,7 @@
pinctrl-names = "default";
pinctrl-0 = <&wlcore_irq_pin>;
interrupt-parent = <&gpio1>;
interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */
ref-clock-frequency = <26000000>;
};
};

View File

@ -1146,7 +1146,7 @@
};
};
gpu_cm: clock-controller@1500 {
gpu_cm: gpu_cm@1500 {
compatible = "ti,omap4-cm";
reg = <0x1500 0x100>;
#address-cells = <1>;

View File

@ -609,13 +609,13 @@
<STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
bias-disable;
drive-push-pull;
slew-rate = <3>;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
bias-pull-up;
drive-push-pull;
slew-rate = <3>;
slew-rate = <1>;
};
};
@ -637,13 +637,13 @@
<STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
bias-disable;
drive-push-pull;
slew-rate = <3>;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
bias-pull-up;
drive-push-pull;
slew-rate = <3>;
slew-rate = <1>;
};
};

View File

@ -380,9 +380,8 @@
compatible = "allwinner,sun7i-a20-csi0";
reg = <0x01c09000 0x1000>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
<&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
clock-names = "bus", "mod", "isp", "ram";
clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
clock-names = "bus", "isp", "ram";
resets = <&ccu RST_CSI0>;
status = "disabled";
};

View File

@ -602,6 +602,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
sff0_i2c: i2c@1 {
#address-cells = <1>;
@ -640,6 +641,7 @@
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
sff5_i2c: i2c@1 {
#address-cells = <1>;

View File

@ -167,6 +167,7 @@ CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DA8XX=y
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=m

View File

@ -276,6 +276,7 @@ CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV5645=m
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MSM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y

View File

@ -356,15 +356,15 @@ CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
CONFIG_DRM_OMAP_PANEL_DPI=m
CONFIG_DRM_OMAP_PANEL_DSI_CM=m
CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_TILCDC=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_TI_TFP410=m
CONFIG_DRM_PANEL_LG_LB035Q02=m
CONFIG_DRM_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_PANEL_SONY_ACX565AKM=m
CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y

View File

@ -82,7 +82,7 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_CP15_MMU
static inline unsigned int get_domain(void)
static __always_inline unsigned int get_domain(void)
{
unsigned int domain;
@ -94,7 +94,7 @@ static inline unsigned int get_domain(void)
return domain;
}
static inline void set_domain(unsigned val)
static __always_inline void set_domain(unsigned int val)
{
asm volatile(
"mcr p15, 0, %0, c3, c0 @ set domain"
@ -102,12 +102,12 @@ static inline void set_domain(unsigned val)
isb();
}
#else
static inline unsigned int get_domain(void)
static __always_inline unsigned int get_domain(void)
{
return 0;
}
static inline void set_domain(unsigned val)
static __always_inline void set_domain(unsigned int val)
{
}
#endif

View File

@ -22,7 +22,7 @@
* perform such accesses (eg, via list poison values) which could then
* be exploited for priviledge escalation.
*/
static inline unsigned int uaccess_save_and_enable(void)
static __always_inline unsigned int uaccess_save_and_enable(void)
{
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
unsigned int old_domain = get_domain();
@ -37,7 +37,7 @@ static inline unsigned int uaccess_save_and_enable(void)
#endif
}
static inline void uaccess_restore(unsigned int flags)
static __always_inline void uaccess_restore(unsigned int flags)
{
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
/* Restore the user access mask */

View File

@ -68,7 +68,7 @@ ENDPROC(__vet_atags)
* The following fragment of code is executed with the MMU on in MMU mode,
* and uses absolute addresses; this is not position independent.
*
* r0 = cp#15 control register
* r0 = cp#15 control register (exc_ret for M-class)
* r1 = machine ID
* r2 = atags/dtb pointer
* r9 = processor ID
@ -137,7 +137,8 @@ __mmap_switched_data:
#ifdef CONFIG_CPU_CP15
.long cr_alignment @ r3
#else
.long 0 @ r3
M_CLASS(.long exc_ret) @ r3
AR_CLASS(.long 0) @ r3
#endif
.size __mmap_switched_data, . - __mmap_switched_data

View File

@ -201,6 +201,8 @@ M_CLASS(streq r3, [r12, #PMSAv8_MAIR1])
bic r0, r0, #V7M_SCB_CCR_IC
#endif
str r0, [r12, V7M_SCB_CCR]
/* Pass exc_ret to __mmap_switched */
mov r0, r10
#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
ret lr
ENDPROC(__after_proc_init)

View File

@ -462,8 +462,8 @@ static s8 dm365_queue_priority_mapping[][2] = {
};
static const struct dma_slave_map dm365_edma_map[] = {
{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },

View File

@ -89,6 +89,13 @@ static struct iommu_platform_data omap3_iommu_pdata = {
.reset_name = "mmu",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
.device_enable = omap_device_enable,
.device_idle = omap_device_idle,
};
static struct iommu_platform_data omap3_iommu_isp_pdata = {
.device_enable = omap_device_enable,
.device_idle = omap_device_idle,
};
static int omap3_sbc_t3730_twl_callback(struct device *dev,
@ -424,6 +431,8 @@ static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
.device_enable = omap_device_enable,
.device_idle = omap_device_idle,
};
#endif
@ -617,6 +626,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
OF_DEV_AUXDATA("ti,omap2-iommu", 0x480bd400, "480bd400.mmu",
&omap3_iommu_isp_pdata),
OF_DEV_AUXDATA("ti,omap3-smartreflex-core", 0x480cb000,
"480cb000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
OF_DEV_AUXDATA("ti,omap3-smartreflex-mpu-iva", 0x480c9000,

View File

@ -324,7 +324,7 @@ union offset_union {
__put32_unaligned_check("strbt", val, addr)
static void
do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs *regs, union offset_union offset)
do_alignment_finish_ldst(unsigned long addr, u32 instr, struct pt_regs *regs, union offset_union offset)
{
if (!LDST_U_BIT(instr))
offset.un = -offset.un;
@ -337,7 +337,7 @@ do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs
}
static int
do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *regs)
do_alignment_ldrhstrh(unsigned long addr, u32 instr, struct pt_regs *regs)
{
unsigned int rd = RD_BITS(instr);
@ -386,8 +386,7 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
}
static int
do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
struct pt_regs *regs)
do_alignment_ldrdstrd(unsigned long addr, u32 instr, struct pt_regs *regs)
{
unsigned int rd = RD_BITS(instr);
unsigned int rd2;
@ -449,7 +448,7 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
}
static int
do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *regs)
do_alignment_ldrstr(unsigned long addr, u32 instr, struct pt_regs *regs)
{
unsigned int rd = RD_BITS(instr);
@ -498,7 +497,7 @@ do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *reg
* PU = 10 A B
*/
static int
do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *regs)
do_alignment_ldmstm(unsigned long addr, u32 instr, struct pt_regs *regs)
{
unsigned int rd, rn, correction, nr_regs, regbits;
unsigned long eaddr, newaddr;
@ -539,7 +538,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
* processor for us.
*/
if (addr != eaddr) {
pr_err("LDMSTM: PC = %08lx, instr = %08lx, "
pr_err("LDMSTM: PC = %08lx, instr = %08x, "
"addr = %08lx, eaddr = %08lx\n",
instruction_pointer(regs), instr, addr, eaddr);
show_regs(regs);
@ -716,10 +715,10 @@ thumb2arm(u16 tinstr)
* 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt)
*/
static void *
do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs,
union offset_union *poffset)
{
unsigned long instr = *pinstr;
u32 instr = *pinstr;
u16 tinst1 = (instr >> 16) & 0xffff;
u16 tinst2 = instr & 0xffff;
@ -767,17 +766,48 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
return NULL;
}
static int alignment_get_arm(struct pt_regs *regs, u32 *ip, u32 *inst)
{
u32 instr = 0;
int fault;
if (user_mode(regs))
fault = get_user(instr, ip);
else
fault = probe_kernel_address(ip, instr);
*inst = __mem_to_opcode_arm(instr);
return fault;
}
static int alignment_get_thumb(struct pt_regs *regs, u16 *ip, u16 *inst)
{
u16 instr = 0;
int fault;
if (user_mode(regs))
fault = get_user(instr, ip);
else
fault = probe_kernel_address(ip, instr);
*inst = __mem_to_opcode_thumb16(instr);
return fault;
}
static int
do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
union offset_union uninitialized_var(offset);
unsigned long instr = 0, instrptr;
int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
unsigned long instrptr;
int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
unsigned int type;
unsigned int fault;
u32 instr = 0;
u16 tinstr = 0;
int isize = 4;
int thumb2_32b = 0;
int fault;
if (interrupts_enabled(regs))
local_irq_enable();
@ -786,15 +816,14 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (thumb_mode(regs)) {
u16 *ptr = (u16 *)(instrptr & ~1);
fault = probe_kernel_address(ptr, tinstr);
tinstr = __mem_to_opcode_thumb16(tinstr);
fault = alignment_get_thumb(regs, ptr, &tinstr);
if (!fault) {
if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
IS_T32(tinstr)) {
/* Thumb-2 32-bit */
u16 tinst2 = 0;
fault = probe_kernel_address(ptr + 1, tinst2);
tinst2 = __mem_to_opcode_thumb16(tinst2);
u16 tinst2;
fault = alignment_get_thumb(regs, ptr + 1, &tinst2);
instr = __opcode_thumb32_compose(tinstr, tinst2);
thumb2_32b = 1;
} else {
@ -803,8 +832,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
}
}
} else {
fault = probe_kernel_address((void *)instrptr, instr);
instr = __mem_to_opcode_arm(instr);
fault = alignment_get_arm(regs, (void *)instrptr, &instr);
}
if (fault) {
@ -926,7 +954,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
* Oops, we didn't handle the instruction.
*/
pr_err("Alignment trap: not handling instruction "
"%0*lx at [<%08lx>]\n",
"%0*x at [<%08lx>]\n",
isize << 1,
isize == 2 ? tinstr : instr, instrptr);
ai_skipped += 1;
@ -936,7 +964,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
ai_user += 1;
if (ai_usermode & UM_WARN)
printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*x "
"Address=0x%08lx FSR 0x%03x\n", current->comm,
task_pid_nr(current), instrptr,
isize << 1,

View File

@ -132,13 +132,11 @@ __v7m_setup_cont:
dsb
mov r6, lr @ save LR
ldr sp, =init_thread_union + THREAD_START_SP
stmia sp, {r0-r3, r12}
cpsie i
svc #0
1: cpsid i
ldr r0, =exc_ret
orr lr, lr, #EXC_RET_THREADMODE_PROCESSSTACK
str lr, [r0]
/* Calculate exc_ret */
orr r10, lr, #EXC_RET_THREADMODE_PROCESSSTACK
ldmia sp, {r0-r3, r12}
str r5, [r12, #11 * 4] @ restore the original SVC vector entry
mov lr, r6 @ restore LR

View File

@ -63,3 +63,12 @@
reg = <1>;
};
};
&reg_dc1sw {
/*
* Ethernet PHY needs 30ms to properly power up and some more
* to initialize. 100ms should be plenty of time to finish
* whole process.
*/
regulator-enable-ramp-delay = <100000>;
};

View File

@ -159,6 +159,12 @@
};
&reg_dc1sw {
/*
* Ethernet PHY needs 30ms to properly power up and some more
* to initialize. 100ms should be plenty of time to finish
* whole process.
*/
regulator-enable-ramp-delay = <100000>;
regulator-name = "vcc-phy";
};

View File

@ -142,15 +142,6 @@
clock-output-names = "ext-osc32k";
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";

View File

@ -42,13 +42,14 @@
pinmux: pinmux@14029c {
compatible = "pinctrl-single";
reg = <0x0014029c 0x250>;
reg = <0x0014029c 0x26c>;
#address-cells = <1>;
#size-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xf>;
pinctrl-single,gpio-range = <
&range 0 154 MODE_GPIO
&range 0 91 MODE_GPIO
&range 95 60 MODE_GPIO
>;
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;

View File

@ -464,8 +464,7 @@
<&pinmux 108 16 27>,
<&pinmux 135 77 6>,
<&pinmux 141 67 4>,
<&pinmux 145 149 6>,
<&pinmux 151 91 4>;
<&pinmux 145 149 6>;
};
i2c1: i2c@e0000 {

View File

@ -33,7 +33,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster0_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@1 {
@ -49,7 +49,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster0_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@100 {
@ -65,7 +65,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster1_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@101 {
@ -81,7 +81,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster1_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@200 {
@ -97,7 +97,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster2_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@201 {
@ -113,7 +113,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster2_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@300 {
@ -129,7 +129,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster3_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@301 {
@ -145,7 +145,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster3_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@400 {
@ -161,7 +161,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster4_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@401 {
@ -177,7 +177,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster4_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@500 {
@ -193,7 +193,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster5_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@501 {
@ -209,7 +209,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster5_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@600 {
@ -225,7 +225,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster6_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@601 {
@ -241,7 +241,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster6_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@700 {
@ -257,7 +257,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster7_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cpu@701 {
@ -273,7 +273,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster7_l2>;
cpu-idle-states = <&cpu_pw20>;
cpu-idle-states = <&cpu_pw15>;
};
cluster0_l2: l2-cache0 {
@ -340,9 +340,9 @@
cache-level = <2>;
};
cpu_pw20: cpu-pw20 {
cpu_pw15: cpu-pw15 {
compatible = "arm,idle-state";
idle-state-name = "PW20";
idle-state-name = "PW15";
arm,psci-suspend-param = <0x0>;
entry-latency-us = <2000>;
exit-latency-us = <2000>;

View File

@ -694,7 +694,7 @@
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_DUMMY>,
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
@ -710,7 +710,7 @@
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_DUMMY>,
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
@ -724,7 +724,7 @@
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_DUMMY>,
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";

View File

@ -569,7 +569,7 @@
compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_DUMMY>,
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
<&clk IMX8MN_CLK_NAND_USDHC_BUS>,
<&clk IMX8MN_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
@ -585,7 +585,7 @@
compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_DUMMY>,
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
<&clk IMX8MN_CLK_NAND_USDHC_BUS>,
<&clk IMX8MN_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
@ -599,7 +599,7 @@
compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_DUMMY>,
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
<&clk IMX8MN_CLK_NAND_USDHC_BUS>,
<&clk IMX8MN_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";

View File

@ -89,8 +89,8 @@
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
states = <1000000 0x0
900000 0x1>;
states = <1000000 0x1
900000 0x0>;
regulator-always-on;
};
};

View File

@ -850,7 +850,7 @@
"fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_DUMMY>,
clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
<&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
<&clk IMX8MQ_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
@ -867,7 +867,7 @@
"fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_DUMMY>,
clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
<&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
<&clk IMX8MQ_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";

View File

@ -60,11 +60,6 @@
gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
};
usb3_phy: usb3-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&exp_usb3_vbus>;
};
vsdc_reg: vsdc-reg {
compatible = "regulator-gpio";
regulator-name = "vsdc";
@ -255,10 +250,16 @@
status = "okay";
};
&comphy2 {
connector {
compatible = "usb-a-connector";
phy-supply = <&exp_usb3_vbus>;
};
};
&usb3 {
status = "okay";
phys = <&comphy2 0>;
usb-phy = <&usb3_phy>;
};
&mdio {

View File

@ -44,7 +44,7 @@
power-supply = <&pp3300_disp>;
panel-timing {
clock-frequency = <266604720>;
clock-frequency = <266666667>;
hactive = <2400>;
hfront-porch = <48>;
hback-porch = <84>;

View File

@ -644,7 +644,7 @@
status = "okay";
u2phy0_host: host-port {
phy-supply = <&vcc5v0_host>;
phy-supply = <&vcc5v0_typec>;
status = "okay";
};
@ -712,7 +712,7 @@
&usbdrd_dwc3_0 {
status = "okay";
dr_mode = "otg";
dr_mode = "host";
};
&usbdrd3_1 {

View File

@ -173,7 +173,7 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-max-microvolt = <1700000>;
vin-supply = <&vcc5v0_sys>;
};
};
@ -247,8 +247,8 @@
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
@ -574,7 +574,7 @@
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
vsel1_gpio: vsel1-gpio {
@ -624,7 +624,6 @@
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
disable-wp;
@ -636,8 +635,7 @@
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
mmc-hs200-1_8v;
non-removable;
status = "okay";
};

View File

@ -79,6 +79,7 @@
#define CAVIUM_CPU_PART_THUNDERX_83XX 0x0A3
#define CAVIUM_CPU_PART_THUNDERX2 0x0AF
#define BRCM_CPU_PART_BRAHMA_B53 0x100
#define BRCM_CPU_PART_VULCAN 0x516
#define QCOM_CPU_PART_FALKOR_V1 0x800
@ -105,6 +106,7 @@
#define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
#define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
#define MIDR_CAVIUM_THUNDERX2 MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX2)
#define MIDR_BRAHMA_B53 MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_BRAHMA_B53)
#define MIDR_BRCM_VULCAN MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN)
#define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
#define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)

View File

@ -32,11 +32,11 @@
#define PROT_DEFAULT (_PROT_DEFAULT | PTE_MAYBE_NG)
#define PROT_SECT_DEFAULT (_PROT_SECT_DEFAULT | PMD_MAYBE_NG)
#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
#define PROT_SECT_DEVICE_nGnRE (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_SECT_NORMAL (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
@ -80,8 +80,9 @@
#define PAGE_S2_DEVICE __pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_S2_XN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
/* shared+writable pages are clean by default, hence PTE_RDONLY|PTE_WRITE */
#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE)
#define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
#define PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN)
#define PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN)

View File

@ -489,6 +489,7 @@ static const struct midr_range arm64_ssb_cpus[] = {
MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
{},
};
@ -573,6 +574,7 @@ static const struct midr_range spectre_v2_safe_list[] = {
MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
{ /* sentinel */ }
};
@ -659,17 +661,23 @@ static const struct midr_range arm64_harden_el2_vectors[] = {
#endif
#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
static const struct midr_range arm64_repeat_tlbi_cpus[] = {
static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0),
{
ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0)
},
{
.midr_range.model = MIDR_QCOM_KRYO,
.matches = is_kryo_midr,
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_1286807
MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
{
ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
},
#endif
{},
};
#endif
#ifdef CONFIG_CAVIUM_ERRATUM_27456
@ -737,6 +745,33 @@ static const struct midr_range erratum_1418040_list[] = {
};
#endif
#ifdef CONFIG_ARM64_ERRATUM_845719
static const struct midr_range erratum_845719_list[] = {
/* Cortex-A53 r0p[01234] */
MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
/* Brahma-B53 r0p[0] */
MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
{},
};
#endif
#ifdef CONFIG_ARM64_ERRATUM_843419
static const struct arm64_cpu_capabilities erratum_843419_list[] = {
{
/* Cortex-A53 r0p[01234] */
.matches = is_affected_midr_range,
ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
MIDR_FIXED(0x4, BIT(8)),
},
{
/* Brahma-B53 r0p[0] */
.matches = is_affected_midr_range,
ERRATA_MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
},
{},
};
#endif
const struct arm64_cpu_capabilities arm64_errata[] = {
#ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
{
@ -768,19 +803,18 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
#endif
#ifdef CONFIG_ARM64_ERRATUM_843419
{
/* Cortex-A53 r0p[01234] */
.desc = "ARM erratum 843419",
.capability = ARM64_WORKAROUND_843419,
ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
MIDR_FIXED(0x4, BIT(8)),
.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
.matches = cpucap_multi_entry_cap_matches,
.match_list = erratum_843419_list,
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_845719
{
/* Cortex-A53 r0p[01234] */
.desc = "ARM erratum 845719",
.capability = ARM64_WORKAROUND_845719,
ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
ERRATA_MIDR_RANGE_LIST(erratum_845719_list),
},
#endif
#ifdef CONFIG_CAVIUM_ERRATUM_23154
@ -816,6 +850,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
{
.desc = "Qualcomm Technologies Falkor/Kryo erratum 1003",
.capability = ARM64_WORKAROUND_QCOM_FALKOR_E1003,
.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
.matches = cpucap_multi_entry_cap_matches,
.match_list = qcom_erratum_1003_list,
},
@ -824,7 +859,9 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
{
.desc = "Qualcomm erratum 1009, ARM erratum 1286807",
.capability = ARM64_WORKAROUND_REPEAT_TLBI,
ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus),
.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
.matches = cpucap_multi_entry_cap_matches,
.match_list = arm64_repeat_tlbi_list,
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_858921

View File

@ -632,6 +632,8 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
*/
val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
| (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E);
if (!system_supports_32bit_el0())
val |= ARMV8_PMU_PMCR_LC;
__vcpu_sys_reg(vcpu, r->reg) = val;
}
@ -682,6 +684,8 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
val = __vcpu_sys_reg(vcpu, PMCR_EL0);
val &= ~ARMV8_PMU_PMCR_MASK;
val |= p->regval & ARMV8_PMU_PMCR_MASK;
if (!system_supports_32bit_el0())
val |= ARMV8_PMU_PMCR_LC;
__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
kvm_pmu_handle_pmcr(vcpu, val);
kvm_vcpu_pmu_restore_guest(vcpu);

View File

@ -84,7 +84,7 @@ void __init prom_init(void)
* Here we will start up CPU1 in the background and ask it to
* reconfigure itself then go back to sleep.
*/
memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
memcpy((void *)0xa0000200, bmips_smp_movevec, 0x20);
__sync();
set_c0_cause(C_SW0);
cpumask_set_cpu(1, &bmips_booted_mask);

View File

@ -75,11 +75,11 @@ static inline int register_bmips_smp_ops(void)
#endif
}
extern char bmips_reset_nmi_vec;
extern char bmips_reset_nmi_vec_end;
extern char bmips_smp_movevec;
extern char bmips_smp_int_vec;
extern char bmips_smp_int_vec_end;
extern char bmips_reset_nmi_vec[];
extern char bmips_reset_nmi_vec_end[];
extern char bmips_smp_movevec[];
extern char bmips_smp_int_vec[];
extern char bmips_smp_int_vec_end[];
extern int bmips_smp_enabled;
extern int bmips_cpu_offset;

View File

@ -24,6 +24,8 @@
#define VDSO_HAS_CLOCK_GETRES 1
#define __VDSO_USE_SYSCALL ULLONG_MAX
#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
static __always_inline long gettimeofday_fallback(
@ -205,7 +207,7 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
break;
#endif
default:
cycle_now = 0;
cycle_now = __VDSO_USE_SYSCALL;
break;
}

View File

@ -464,10 +464,10 @@ static void bmips_wr_vec(unsigned long dst, char *start, char *end)
static inline void bmips_nmi_handler_setup(void)
{
bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec,
&bmips_reset_nmi_vec_end);
bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec,
&bmips_smp_int_vec_end);
bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec,
bmips_reset_nmi_vec_end);
bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec,
bmips_smp_int_vec_end);
}
struct reset_vec_info {

View File

@ -653,6 +653,13 @@ static void build_restore_pagemask(u32 **p, struct uasm_reloc **r,
int restore_scratch)
{
if (restore_scratch) {
/*
* Ensure the MFC0 below observes the value written to the
* KScratch register by the prior MTC0.
*/
if (scratch_reg >= 0)
uasm_i_ehb(p);
/* Reset default page size */
if (PM_DEFAULT_MASK >> 16) {
uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16);
@ -667,12 +674,10 @@ static void build_restore_pagemask(u32 **p, struct uasm_reloc **r,
uasm_i_mtc0(p, 0, C0_PAGEMASK);
uasm_il_b(p, r, lid);
}
if (scratch_reg >= 0) {
uasm_i_ehb(p);
if (scratch_reg >= 0)
UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
} else {
else
UASM_i_LW(p, 1, scratchpad_offset(0), 0);
}
} else {
/* Reset default page size */
if (PM_DEFAULT_MASK >> 16) {
@ -921,6 +926,10 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
}
if (mode != not_refill && check_for_high_segbits) {
uasm_l_large_segbits_fault(l, *p);
if (mode == refill_scratch && scratch_reg >= 0)
uasm_i_ehb(p);
/*
* We get here if we are an xsseg address, or if we are
* an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
@ -939,12 +948,10 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
uasm_i_jr(p, ptr);
if (mode == refill_scratch) {
if (scratch_reg >= 0) {
uasm_i_ehb(p);
if (scratch_reg >= 0)
UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
} else {
else
UASM_i_LW(p, 1, scratchpad_offset(0), 0);
}
} else {
uasm_i_nop(p);
}

View File

@ -2125,7 +2125,7 @@ ftrace_regs_caller:
copy %rp, %r26
LDREG -FTRACE_FRAME_SIZE-PT_SZ_ALGN(%sp), %r25
ldo -8(%r25), %r25
copy %r3, %arg2
ldo -FTRACE_FRAME_SIZE(%r1), %arg2
b,l ftrace_function_trampoline, %rp
copy %r1, %arg3 /* struct pt_regs */

View File

@ -1217,6 +1217,7 @@ int kvmppc_xive_connect_vcpu(struct kvm_device *dev,
struct kvmppc_xive *xive = dev->private;
struct kvmppc_xive_vcpu *xc;
int i, r = -EBUSY;
u32 vp_id;
pr_devel("connect_vcpu(cpu=%d)\n", cpu);
@ -1228,25 +1229,32 @@ int kvmppc_xive_connect_vcpu(struct kvm_device *dev,
return -EPERM;
if (vcpu->arch.irq_type != KVMPPC_IRQ_DEFAULT)
return -EBUSY;
if (kvmppc_xive_find_server(vcpu->kvm, cpu)) {
pr_devel("Duplicate !\n");
return -EEXIST;
}
if (cpu >= (KVM_MAX_VCPUS * vcpu->kvm->arch.emul_smt_mode)) {
pr_devel("Out of bounds !\n");
return -EINVAL;
}
xc = kzalloc(sizeof(*xc), GFP_KERNEL);
if (!xc)
return -ENOMEM;
/* We need to synchronize with queue provisioning */
mutex_lock(&xive->lock);
vp_id = kvmppc_xive_vp(xive, cpu);
if (kvmppc_xive_vp_in_use(xive->kvm, vp_id)) {
pr_devel("Duplicate !\n");
r = -EEXIST;
goto bail;
}
xc = kzalloc(sizeof(*xc), GFP_KERNEL);
if (!xc) {
r = -ENOMEM;
goto bail;
}
vcpu->arch.xive_vcpu = xc;
xc->xive = xive;
xc->vcpu = vcpu;
xc->server_num = cpu;
xc->vp_id = kvmppc_xive_vp(xive, cpu);
xc->vp_id = vp_id;
xc->mfrr = 0xff;
xc->valid = true;

View File

@ -220,6 +220,18 @@ static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server)
return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server);
}
static inline bool kvmppc_xive_vp_in_use(struct kvm *kvm, u32 vp_id)
{
struct kvm_vcpu *vcpu = NULL;
int i;
kvm_for_each_vcpu(i, vcpu, kvm) {
if (vcpu->arch.xive_vcpu && vp_id == vcpu->arch.xive_vcpu->vp_id)
return true;
}
return false;
}
/*
* Mapping between guest priorities and host priorities
* is as follow.

View File

@ -106,6 +106,7 @@ int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
struct kvmppc_xive *xive = dev->private;
struct kvmppc_xive_vcpu *xc = NULL;
int rc;
u32 vp_id;
pr_devel("native_connect_vcpu(server=%d)\n", server_num);
@ -124,7 +125,8 @@ int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
mutex_lock(&xive->lock);
if (kvmppc_xive_find_server(vcpu->kvm, server_num)) {
vp_id = kvmppc_xive_vp(xive, server_num);
if (kvmppc_xive_vp_in_use(xive->kvm, vp_id)) {
pr_devel("Duplicate !\n");
rc = -EEXIST;
goto bail;
@ -141,7 +143,7 @@ int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
xc->vcpu = vcpu;
xc->server_num = server_num;
xc->vp_id = kvmppc_xive_vp(xive, server_num);
xc->vp_id = vp_id;
xc->valid = true;
vcpu->arch.irq_type = KVMPPC_IRQ_XIVE;

View File

@ -12,7 +12,6 @@
#include <asm/asm.h>
#ifdef CONFIG_GENERIC_BUG
#define __INSN_LENGTH_MASK _UL(0x3)
#define __INSN_LENGTH_32 _UL(0x3)
#define __COMPRESSED_INSN_MASK _UL(0xffff)
@ -20,7 +19,6 @@
#define __BUG_INSN_32 _UL(0x00100073) /* ebreak */
#define __BUG_INSN_16 _UL(0x9002) /* c.ebreak */
#ifndef __ASSEMBLY__
typedef u32 bug_insn_t;
#ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
@ -43,6 +41,7 @@ typedef u32 bug_insn_t;
RISCV_SHORT " %2"
#endif
#ifdef CONFIG_GENERIC_BUG
#define __BUG_FLAGS(flags) \
do { \
__asm__ __volatile__ ( \
@ -58,14 +57,10 @@ do { \
"i" (flags), \
"i" (sizeof(struct bug_entry))); \
} while (0)
#endif /* !__ASSEMBLY__ */
#else /* CONFIG_GENERIC_BUG */
#ifndef __ASSEMBLY__
#define __BUG_FLAGS(flags) do { \
__asm__ __volatile__ ("ebreak\n"); \
} while (0)
#endif /* !__ASSEMBLY__ */
#endif /* CONFIG_GENERIC_BUG */
#define BUG() do { \
@ -79,15 +74,10 @@ do { \
#include <asm-generic/bug.h>
#ifndef __ASSEMBLY__
struct pt_regs;
struct task_struct;
extern void die(struct pt_regs *regs, const char *str);
extern void do_trap(struct pt_regs *regs, int signo, int code,
unsigned long addr);
#endif /* !__ASSEMBLY__ */
void die(struct pt_regs *regs, const char *str);
void do_trap(struct pt_regs *regs, int signo, int code, unsigned long addr);
#endif /* _ASM_RISCV_BUG_H */

View File

@ -13,6 +13,7 @@
#include <linux/types.h>
#include <asm/mmiowb.h>
#include <asm/pgtable.h>
extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);
@ -161,6 +162,12 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
#define writeq(v,c) ({ __io_bw(); writeq_cpu((v),(c)); __io_aw(); })
#endif
/*
* I/O port access constants.
*/
#define IO_SPACE_LIMIT (PCI_IO_SIZE - 1)
#define PCI_IOBASE ((void __iomem *)PCI_IO_START)
/*
* Emulation routines for the port-mapped IO space used by some PCI drivers.
* These are defined as being "fully synchronous", but also "not guaranteed to

View File

@ -7,6 +7,9 @@
#ifndef _ASM_RISCV_IRQ_H
#define _ASM_RISCV_IRQ_H
#include <linux/interrupt.h>
#include <linux/linkage.h>
#define NR_IRQS 0
void riscv_timer_interrupt(void);

View File

@ -7,6 +7,7 @@
#define _ASM_RISCV_PGTABLE_H
#include <linux/mmzone.h>
#include <linux/sizes.h>
#include <asm/pgtable-bits.h>
@ -86,6 +87,7 @@ extern pgd_t swapper_pg_dir[];
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define PCI_IO_SIZE SZ_16M
/*
* Roughly size the vmemmap space to be large enough to fit enough
@ -100,7 +102,10 @@ extern pgd_t swapper_pg_dir[];
#define vmemmap ((struct page *)VMEMMAP_START)
#define FIXADDR_TOP (VMEMMAP_START)
#define PCI_IO_END VMEMMAP_START
#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
#define FIXADDR_TOP PCI_IO_START
#ifdef CONFIG_64BIT
#define FIXADDR_SIZE PMD_SIZE
#else
@ -184,10 +189,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
return __pte((pfn << _PAGE_PFN_SHIFT) | pgprot_val(prot));
}
static inline pte_t mk_pte(struct page *page, pgprot_t prot)
{
return pfn_pte(page_to_pfn(page), prot);
}
#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
#define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
@ -428,9 +430,7 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
#ifdef CONFIG_FLATMEM
#define kern_addr_valid(addr) (1) /* FIXME */
#endif
extern void *dtb_early_va;
extern void setup_bootmem(void);

View File

@ -6,6 +6,7 @@
#ifndef _ASM_RISCV_SWITCH_TO_H
#define _ASM_RISCV_SWITCH_TO_H
#include <linux/sched/task_stack.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/csr.h>

View File

@ -10,6 +10,7 @@
#include <asm/processor.h>
#include <asm/hwcap.h>
#include <asm/smp.h>
#include <asm/switch_to.h>
unsigned long elf_hwcap __read_mostly;
#ifdef CONFIG_FPU

21
arch/riscv/kernel/head.h Normal file
View File

@ -0,0 +1,21 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2019 SiFive, Inc.
*/
#ifndef __ASM_HEAD_H
#define __ASM_HEAD_H
#include <linux/linkage.h>
#include <linux/init.h>
extern atomic_t hart_lottery;
asmlinkage void do_page_fault(struct pt_regs *regs);
asmlinkage void __init setup_vm(uintptr_t dtb_pa);
extern void *__cpu_up_stack_pointer[];
extern void *__cpu_up_task_pointer[];
void __init parse_dtb(void);
#endif /* __ASM_HEAD_H */

View File

@ -24,7 +24,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
return 0;
}
asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
asmlinkage __visible void __irq_entry do_IRQ(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);

View File

@ -8,6 +8,7 @@
#include <linux/elf.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleloader.h>
unsigned long module_emit_got_entry(struct module *mod, unsigned long val)
{

View File

@ -7,6 +7,7 @@
* Copyright (C) 2017 SiFive
*/
#include <linux/cpu.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
@ -19,6 +20,7 @@
#include <asm/csr.h>
#include <asm/string.h>
#include <asm/switch_to.h>
#include <asm/thread_info.h>
extern asmlinkage void ret_from_fork(void);
extern asmlinkage void ret_from_kernel_thread(void);

View File

@ -148,7 +148,7 @@ long arch_ptrace(struct task_struct *child, long request,
* Allows PTRACE_SYSCALL to work. These are called from entry.S in
* {handle,ret_from}_syscall.
*/
void do_syscall_trace_enter(struct pt_regs *regs)
__visible void do_syscall_trace_enter(struct pt_regs *regs)
{
if (test_thread_flag(TIF_SYSCALL_TRACE))
if (tracehook_report_syscall_entry(regs))
@ -162,7 +162,7 @@ void do_syscall_trace_enter(struct pt_regs *regs)
audit_syscall_entry(regs->a7, regs->a0, regs->a1, regs->a2, regs->a3);
}
void do_syscall_trace_exit(struct pt_regs *regs)
__visible void do_syscall_trace_exit(struct pt_regs *regs)
{
audit_syscall_exit(regs);

View File

@ -4,6 +4,7 @@
*/
#include <linux/reboot.h>
#include <linux/pm.h>
#include <asm/sbi.h>
static void default_power_off(void)

View File

@ -24,6 +24,8 @@
#include <asm/tlbflush.h>
#include <asm/thread_info.h>
#include "head.h"
#ifdef CONFIG_DUMMY_CONSOLE
struct screen_info screen_info = {
.orig_video_lines = 30,

View File

@ -26,7 +26,7 @@ struct rt_sigframe {
#ifdef CONFIG_FPU
static long restore_fp_state(struct pt_regs *regs,
union __riscv_fp_state *sc_fpregs)
union __riscv_fp_state __user *sc_fpregs)
{
long err;
struct __riscv_d_ext_state __user *state = &sc_fpregs->d;
@ -53,7 +53,7 @@ static long restore_fp_state(struct pt_regs *regs,
}
static long save_fp_state(struct pt_regs *regs,
union __riscv_fp_state *sc_fpregs)
union __riscv_fp_state __user *sc_fpregs)
{
long err;
struct __riscv_d_ext_state __user *state = &sc_fpregs->d;
@ -292,8 +292,8 @@ static void do_signal(struct pt_regs *regs)
* notification of userspace execution resumption
* - triggered by the _TIF_WORK_MASK flags
*/
asmlinkage void do_notify_resume(struct pt_regs *regs,
unsigned long thread_info_flags)
asmlinkage __visible void do_notify_resume(struct pt_regs *regs,
unsigned long thread_info_flags)
{
/* Handle pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)

View File

@ -8,7 +8,9 @@
* Copyright (C) 2017 SiFive
*/
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/profile.h>
#include <linux/smp.h>
#include <linux/sched.h>
#include <linux/seq_file.h>

View File

@ -29,6 +29,9 @@
#include <asm/tlbflush.h>
#include <asm/sections.h>
#include <asm/sbi.h>
#include <asm/smp.h>
#include "head.h"
void *__cpu_up_stack_pointer[NR_CPUS];
void *__cpu_up_task_pointer[NR_CPUS];
@ -130,7 +133,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
/*
* C entry point for a secondary processor.
*/
asmlinkage void __init smp_callin(void)
asmlinkage __visible void __init smp_callin(void)
{
struct mm_struct *mm = &init_mm;

View File

@ -8,6 +8,7 @@
#include <linux/syscalls.h>
#include <asm-generic/syscalls.h>
#include <asm/vdso.h>
#include <asm/syscall.h>
#undef __SYSCALL
#define __SYSCALL(nr, call) [nr] = (call),

View File

@ -7,6 +7,7 @@
#include <linux/clocksource.h>
#include <linux/delay.h>
#include <asm/sbi.h>
#include <asm/processor.h>
unsigned long riscv_timebase;
EXPORT_SYMBOL_GPL(riscv_timebase);

View File

@ -3,6 +3,7 @@
* Copyright (C) 2012 Regents of the University of California
*/
#include <linux/cpu.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
@ -83,7 +84,7 @@ static void do_trap_error(struct pt_regs *regs, int signo, int code,
}
#define DO_ERROR_INFO(name, signo, code, str) \
asmlinkage void name(struct pt_regs *regs) \
asmlinkage __visible void name(struct pt_regs *regs) \
{ \
do_trap_error(regs, signo, code, regs->sepc, "Oops - " str); \
}
@ -111,7 +112,6 @@ DO_ERROR_INFO(do_trap_ecall_s,
DO_ERROR_INFO(do_trap_ecall_m,
SIGILL, ILL_ILLTRP, "environment call from M-mode");
#ifdef CONFIG_GENERIC_BUG
static inline unsigned long get_break_insn_length(unsigned long pc)
{
bug_insn_t insn;
@ -120,28 +120,15 @@ static inline unsigned long get_break_insn_length(unsigned long pc)
return 0;
return (((insn & __INSN_LENGTH_MASK) == __INSN_LENGTH_32) ? 4UL : 2UL);
}
#endif /* CONFIG_GENERIC_BUG */
asmlinkage void do_trap_break(struct pt_regs *regs)
asmlinkage __visible void do_trap_break(struct pt_regs *regs)
{
if (user_mode(regs)) {
force_sig_fault(SIGTRAP, TRAP_BRKPT,
(void __user *)(regs->sepc));
return;
}
#ifdef CONFIG_GENERIC_BUG
{
enum bug_trap_type type;
type = report_bug(regs->sepc, regs);
if (type == BUG_TRAP_TYPE_WARN) {
regs->sepc += get_break_insn_length(regs->sepc);
return;
}
}
#endif /* CONFIG_GENERIC_BUG */
die(regs, "Kernel BUG");
if (user_mode(regs))
force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->sepc);
else if (report_bug(regs->sepc, regs) == BUG_TRAP_TYPE_WARN)
regs->sepc += get_break_insn_length(regs->sepc);
else
die(regs, "Kernel BUG");
}
#ifdef CONFIG_GENERIC_BUG

View File

@ -6,6 +6,7 @@
* Copyright (C) 2015 Regents of the University of California
*/
#include <linux/elf.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/binfmts.h>
@ -25,7 +26,7 @@ static union {
struct vdso_data data;
u8 page[PAGE_SIZE];
} vdso_data_store __page_aligned_data;
struct vdso_data *vdso_data = &vdso_data_store.data;
static struct vdso_data *vdso_data = &vdso_data_store.data;
static int __init vdso_init(void)
{

View File

@ -7,6 +7,7 @@
#include <linux/mm.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
/*
* When necessary, performs a deferred icache flush for the given MM context,

Some files were not shown because too many files have changed in this diff Show More