ARM: dts: qcom: Add support for ASUS ZenWatch 2
Add support for this smartwatch, based on Snapdragon 400 SoC. Currently supported functionality: * Internal storage * USB * Charger * Power button * Vibration motor * Bluetooth * Wifi Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226101939.1011551-2-luca@z3ntu.xyz
This commit is contained in:
Luca Weiss
Bjorn Andersson
parent
b736cedce5
commit
d3236c598e
|
|
@ -977,6 +977,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
|
|||
ox820-cloudengines-pogoplug-series-3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-apq8016-sbc.dtb \
|
||||
qcom-apq8026-asus-sparrow.dtb \
|
||||
qcom-apq8026-lg-lenok.dtb \
|
||||
qcom-apq8060-dragonboard.dtb \
|
||||
qcom-apq8064-cm-qs600.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,294 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "qcom-msm8226.dtsi"
|
||||
#include "qcom-pm8226.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ASUS ZenWatch 2";
|
||||
compatible = "asus,sparrow", "qcom,apq8026";
|
||||
chassis-type = "watch";
|
||||
qcom,msm-id = <199 0x20000>;
|
||||
qcom,board-id = <8 3005>;
|
||||
|
||||
reserved-memory {
|
||||
sbl_region: sbl@2f00000 {
|
||||
reg = <0x02f00000 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
external_image_region: external-image@3100000 {
|
||||
reg = <0x3100000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
peripheral_region: peripheral@3300000 {
|
||||
reg = <0x3300000 0x600000>;
|
||||
no-map;
|
||||
};
|
||||
adsp_region: adsp@3900000 {
|
||||
reg = <0x3900000 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
modem_region: modem@4d00000 {
|
||||
reg = <0x4d00000 0x1b00000>;
|
||||
no-map;
|
||||
};
|
||||
modem_efs_region: modem-efs@7f00000 {
|
||||
reg = <0x7f00000 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vreg_wlan: wlan-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "wl-reg";
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
|
||||
gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_regulator_default_state>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp1_uart1_default_state>;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43430a1-bt";
|
||||
max-speed = <3000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bluetooth_default_state>;
|
||||
|
||||
host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
|
||||
device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8226_vib {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
pm8226-regulators {
|
||||
compatible = "qcom,rpm-pm8226-regulators";
|
||||
|
||||
pm8226_s3: s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
pm8226_s4: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
};
|
||||
pm8226_s5: s5 {
|
||||
regulator-min-microvolt = <1150000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
};
|
||||
|
||||
pm8226_l1: l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
pm8226_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
pm8226_l3: l3 {
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1337500>;
|
||||
};
|
||||
pm8226_l4: l4 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
pm8226_l5: l5 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
pm8226_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
pm8226_l7: l7 {
|
||||
regulator-min-microvolt = <1900000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
};
|
||||
pm8226_l8: l8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
pm8226_l9: l9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
pm8226_l10: l10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
pm8226_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
pm8226_l14: l14 {
|
||||
regulator-min-microvolt = <2750000>;
|
||||
regulator-max-microvolt = <2750000>;
|
||||
};
|
||||
pm8226_l15: l15 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
pm8226_l16: l16 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
pm8226_l17: l17 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
pm8226_l18: l18 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
pm8226_l19: l19 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
pm8226_l20: l20 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
pm8226_l21: l21 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
pm8226_l22: l22 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
pm8226_l23: l23 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
pm8226_l24: l24 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
};
|
||||
pm8226_l25: l25 {
|
||||
regulator-min-microvolt = <1775000>;
|
||||
regulator-max-microvolt = <2125000>;
|
||||
};
|
||||
pm8226_l26: l26 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
pm8226_l27: l27 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
pm8226_l28: l28 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8226_lvs1: lvs1 {};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
|
||||
vmmc-supply = <&pm8226_l17>;
|
||||
vqmmc-supply = <&pm8226_l6>;
|
||||
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&sdhc_3 {
|
||||
status = "okay";
|
||||
|
||||
max-frequency = <100000000>;
|
||||
non-removable;
|
||||
|
||||
vmmc-supply = <&vreg_wlan>;
|
||||
vqmmc-supply = <&pm8226_l6>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wifi@1 {
|
||||
compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
|
||||
interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-names = "host-wake";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_hostwake_default_state>;
|
||||
};
|
||||
};
|
||||
|
||||
&smbb {
|
||||
qcom,fast-charge-safe-current = <1500000>;
|
||||
qcom,fast-charge-current-limit = <350000>;
|
||||
qcom,fast-charge-safe-voltage = <4430000>;
|
||||
qcom,fast-charge-high-threshold-voltage = <4400000>;
|
||||
qcom,auto-recharge-threshold-voltage = <4300000>;
|
||||
qcom,minimum-input-voltage = <4400000>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
blsp1_uart1_default_state: blsp1-uart1-default-state {
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
||||
function = "blsp_uart1";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
bluetooth_default_state: bluetooth-default-state {
|
||||
pins = "gpio48", "gpio61";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
wlan_hostwake_default_state: wlan-hostwake-default-state {
|
||||
pins = "gpio46";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
wlan_regulator_default_state: wlan-regulator-default-state {
|
||||
pins = "gpio35";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
extcon = <&smbb>;
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&smbb>;
|
||||
v1p8-supply = <&pm8226_l10>;
|
||||
v3p3-supply = <&pm8226_l20>;
|
||||
};
|
||||
|
|
@ -182,6 +182,15 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart1: serial@f991d000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0xf991d000 0x1000>;
|
||||
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart3: serial@f991f000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0xf991f000 0x1000>;
|
||||
|
|
|
|||
Loading…
Reference in New Issue