From 5b167212d673f4fcf02ff4d8266d76daf0d5e061 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 30 Mar 2020 04:22:22 +0200 Subject: [PATCH 01/22] ARM: dts: imx6q-dhcom: Add DH 560-200 display unit support Add DT bits to support the DH 560-200 display unit, which can be plugged into the side of the PDK2 board. The display unit contains a display, EDT ETM0700G0EDH6 and an EDT FT5x06 touchscreen controller. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: Shawn Guo To: linux-arm-kernel@lists.infradead.org Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dhcom-pdk2.dts | 115 ++++++++++++++++++++++++- 1 file changed, 113 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index bb74fc62d913..a2dd7e549568 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -22,6 +22,53 @@ clock-frequency = <24000000>; }; + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + ddc-i2c-bus = <&i2c2>; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + sound { compatible = "fsl,imx-audio-sgtl5000"; model = "imx-sgtl5000"; @@ -65,6 +112,15 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <&sw2_reg>; }; + + touchscreen@38 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + }; }; &iomuxc { @@ -77,9 +133,7 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 - MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 @@ -132,6 +186,52 @@ >; }; + pinctrl_ipu1_lcdif: ipu1-lcdif-grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 + >; + }; + + pinctrl_pwm1: pwm1-grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_touchscreen: touchscreen-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b1 + >; + }; + pinctrl_pcie: pcie-grp { fsl,pins = < MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 @@ -139,6 +239,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -146,6 +250,13 @@ status = "okay"; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; + status = "okay"; +}; + &ssi1 { status = "okay"; }; From f2e3d666a448e239420d6517f29eb3ab06a4740d Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 12 Mar 2020 17:50:12 +0800 Subject: [PATCH 02/22] ARM: dts: imx7: Correct CPU supply name i.MX7 uses cpufreq-dt driver which requires the CPU supply name to be either "cpu0-supply" or "cpu-supply", correct it. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7-tqma7.dtsi | 2 +- arch/arm/boot/dts/imx7d-zii-rmu2.dts | 2 +- arch/arm/boot/dts/imx7d-zii-rpu2.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi index 9aaed85138cb..8773344b54aa 100644 --- a/arch/arm/boot/dts/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi @@ -16,7 +16,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &i2c1 { diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index 2b8d6cc45a53..e5e20b07f184 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -33,7 +33,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &ecspi1 { diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 39812c92bf0d..cbf0dbb4c198 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -182,7 +182,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &clks { From 2d7401f8632fabea6b55a6c693caaa7436f14187 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 12 Mar 2020 17:50:13 +0800 Subject: [PATCH 03/22] ARM: dts: imx7d: Add cpu1 supply Each cpu-core is supposed to list its supply separately, add supply for cpu1. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 4 ++++ arch/arm/boot/dts/imx7d-colibri.dtsi | 4 ++++ arch/arm/boot/dts/imx7d-nitrogen7.dts | 4 ++++ arch/arm/boot/dts/imx7d-sdb.dts | 4 ++++ arch/arm/boot/dts/imx7d-tqma7.dtsi | 4 ++++ 5 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 89267cd59037..713483c39c9d 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -37,6 +37,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index c59d72e50920..219a0404a058 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -13,6 +13,10 @@ }; }; +&cpu1 { + cpu-supply = <®_DCDC2>; +}; + &gpmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 6b4acea1ef79..e0751e6ba3c0 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -121,6 +121,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 869efbc4af42..17cca8a9f77b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -162,6 +162,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi index 8ad3048dac0d..598aed1ffd99 100644 --- a/arch/arm/boot/dts/imx7d-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi @@ -9,3 +9,7 @@ #include "imx7d.dtsi" #include "imx7-tqma7.dtsi" + +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; From e7e5af7df1f518610aca8fa29a2eb711eb2ed5b2 Mon Sep 17 00:00:00 2001 From: Igor Opaniuk Date: Mon, 16 Mar 2020 16:33:45 +0200 Subject: [PATCH 04/22] ARM: dts: colibri: introduce device trees with UHS-I support 1. Introduce dtsi with overlay configuration for enabling UHS-I for Colibri iMX6S/DL V1.1x re-design. 2. Introduce new dts for the Colibri iMX6S/DL V1.1x on Colibri Evaluation Carrier Board V3.x. However, disable 1.8V for the Colibri Evaluation Board since this carrier board has 3.3V pull-ups on. 3. Provide proper configuration for VGEN3, which allows that rail to be automatically switched to 1.8 volts for proper UHS-I operation mode. Signed-off-by: Igor Opaniuk Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/imx6dl-colibri-v1_1-eval-v3.dts | 31 +++++++++++++ .../boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi | 44 +++++++++++++++++++ arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 ++++- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts create mode 100644 arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..eccdf796276c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -412,6 +412,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ imx6dl-colibri-eval-v3.dtb \ + imx6dl-colibri-v1_1-eval-v3.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts new file mode 100644 index 000000000000..223275f028f1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +/dts-v1/; + +#include "imx6dl-colibri-eval-v3.dts" +#include "imx6qdl-colibri-v1_1-uhs.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx6dl-v1_1-eval-v3", + "toradex,colibri_imx6dl-v1_1", + "toradex,colibri_imx6dl-eval-v3", + "toradex,colibri_imx6dl", + "fsl,imx6dl"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; + /* + * Please make sure your carrier board does not pull-up any of + * the MMC/SD signals to 3.3 volt before attempting to activate + * UHS-I support. + * To let signaling voltage be changed to 1.8V, please + * delete no-1-8-v property (example below): + * /delete-property/no-1-8-v; + */ +}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi new file mode 100644 index 000000000000..7672fbfc29be --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +&iomuxc { + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; + wakeup-source; + keep-power-in-suspend; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 6e3c6b4925a7..240b86d2eb71 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -193,7 +193,16 @@ regulator-always-on; }; - /* vgen3: unused */ + /* + * +V3.3_1.8_SD1 coming off VGEN3 and supplying + * the i.MX 6 NVCC_SD1. + */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; From e0d8d4eaccc29959f20de8bef9f1bcce4e952dfc Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Sun, 29 Mar 2020 12:42:50 +0200 Subject: [PATCH 05/22] ARM: dts: e60k02: add interrupt for PMIC Since the PMIC driver now has IRQ handling, add the GPIO to listen to things like RTC alarm or ADC conversion completion. Signed-off-by: Andreas Kemnade Signed-off-by: Shawn Guo --- arch/arm/boot/dts/e60k02.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index ce50c4dc6f2a..3af1ab4458ef 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -117,6 +117,8 @@ ricoh619: pmic@32 { compatible = "ricoh,rc5t619"; reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; system-power-controller; regulators { From 592a8191f05805bc10aa875509bec64d565df931 Mon Sep 17 00:00:00 2001 From: Kuldeep Singh Date: Mon, 30 Mar 2020 16:46:31 +0530 Subject: [PATCH 06/22] arm: dts: ls1021atwr: Add QSPI node properties LS1021A-TWR has one micron "n25q128a13" flash of size 16M. Add QSPI node properties for it. Signed-off-by: Kuldeep Singh Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a-twr.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 9b1fe99d55b1..5edf001f6138 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -242,6 +242,20 @@ status = "okay"; }; +&qspi { + status = "okay"; + + n25q128a130: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &sai1 { status = "okay"; }; From 86b08bd5b99480b79a25343f24c1b8c4ddcb5c09 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Apr 2020 16:44:17 +0100 Subject: [PATCH 07/22] ARM: dts: imx6-sr-som: add ethernet PHY configuration Add ethernet PHY configuration ahead of removing the quirk that configures the clocking mode for the PHY. The RGMII delay is already set correctly. Signed-off-by: Russell King Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 6d7f6b9035bc..b06577808ff4 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,10 +53,21 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; + phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + reg = <0>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &iomuxc { From 957743b79b1ebb710f5498b61a212cebc302e685 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Wed, 29 Apr 2020 08:22:35 -0700 Subject: [PATCH 08/22] ARM: dts: imx6qdl-gw552x: add USB OTG support The GW552x-B board revision adds USB OTG support. Enable the device-tree node and configure the OTG_ID pin. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index dc646b72b59a..bb3597132c62 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -258,6 +258,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -359,6 +367,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 From 16d6b91a4b2a817ab0b8e224cffa0c838b16a8df Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 1 May 2020 17:37:47 -0300 Subject: [PATCH 09/22] ARM: dts: imx50: Remove unused iomuxc-gpr node The iomuxc-gpr node is not used and causes the following dtc warning with W=1: arch/arm/boot/dts/imx50.dtsi:286.28-289.6: Warning (unique_unit_address): /soc/bus@50000000/iomuxc@53fa8000: duplicate unit-address (also used in node /soc/bus@50000000/iomuxc-gpr@53fa8000) Remove the node to fix the warning. Signed-off-by: Fabio Estevam Reviewed-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx50.dtsi | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index d325658901c5..339294df0399 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -288,11 +288,6 @@ reg = <0x53fa8000 0x4000>; }; - gpr: iomuxc-gpr@53fa8000 { - compatible = "fsl,imx50-iomuxc-gpr", "syscon"; - reg = <0x53fa8000 0xc>; - }; - pwm1: pwm@53fb4000 { #pwm-cells = <2>; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; From 905d3d25c18a44f9e69fa5b1c2a6467df0471fe2 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 12 May 2020 10:25:06 +0800 Subject: [PATCH 10/22] ARM: dts: imx51: Add src node interrupt Interrupt is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 92fbb90bec57..3f1e913d5ab8 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -442,6 +442,7 @@ src: src@73fd0000 { compatible = "fsl,imx51-src"; reg = <0x73fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; From 012d1c246f1f821762404196f04591411fc17e22 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 12 May 2020 10:25:07 +0800 Subject: [PATCH 11/22] ARM: dts: imx53: Add src node interrupt Interrupt is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 8536f59f59e6..0d06dbdd932c 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -591,6 +591,7 @@ src: src@53fd0000 { compatible = "fsl,imx53-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; From 9e72702a3d9a967edac02d8e937bce2b68b77814 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 12 May 2020 13:59:37 -0700 Subject: [PATCH 12/22] ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support Add one node for the accel/gyro i2c device and another for the separate magnetometer device in the lsm9ds1. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 31 +++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index e8e36dfd0a6b..69ca70d3baa8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -295,6 +295,15 @@ VDDIO-supply = <®_3p3v>; }; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + }; + tca8418: keypad@34 { compatible = "ti,tca8418"; pinctrl-names = "default"; @@ -389,6 +398,16 @@ }; }; }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + }; }; &i2c3 { @@ -609,6 +628,12 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0 + >; + }; + pinctrl_keypad: keypadgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ @@ -616,6 +641,12 @@ >; }; + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ From c8756cbad816954be912ba32277ccd55fe7acc01 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 12 May 2020 13:59:56 -0700 Subject: [PATCH 13/22] ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support Add one node for the accel/gyro i2c device and another for the separate magnetometer device in the lsm9ds1. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 31 +++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 6d21cc6a9d4b..76d6cf57f1c3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -248,6 +248,15 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + }; + ltc3676: pmic@3c { compatible = "lltc,ltc3676"; reg = <0x3c>; @@ -320,6 +329,16 @@ }; }; }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + }; }; &i2c3 { @@ -501,6 +520,18 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + >; + }; + + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ From d40edafe80569c5b4d8893c1cdd1060c54ef433c Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 12 May 2020 14:54:15 -0700 Subject: [PATCH 14/22] ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt The Sterling-LWB has a BCM4330 which has a UART based bluetooth HCI. Add support for binding to the bcm_hci driver to take care of handling the shutdown gpio and loading firmware. Because the shutdown gpio is more of an enable than a regulator go ahead and replace the regulator with a shutdown-gpio. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 32 ++++++++++----------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 30fe47ff64a4..b850f8f62970 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -83,19 +83,6 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; - - reg_bt: regulator-bt { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_bt>; - compatible = "regulator-fixed"; - regulator-name = "bt"; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - startup-delay-us = <100>; - enable-active-high; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; }; @@ -231,9 +218,14 @@ /* Sterling-LWB Bluetooth */ &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; + pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; }; /* GPS */ @@ -288,6 +280,12 @@ >; }; + pinctrl_bten: btengrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 + >; + }; + pinctrl_ecspi3: escpi3grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 @@ -393,12 +391,6 @@ >; }; - pinctrl_reg_bt: regbtgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 - >; - }; - pinctrl_reg_wl: regwlgrp { fsl,pins = < MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 From 4792ff641cc8993606013d27d84cda59d8cc76c5 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 12 May 2020 15:02:34 -0700 Subject: [PATCH 15/22] ARM: dts: imx6qdl-gw5910: fix wlan regulator Connect the wl_reg regulator to usdhc2 such that it can be enabled and disabled as needed. There is no need for this to be always-on. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index b850f8f62970..0857de505192 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -81,7 +81,6 @@ enable-active-high; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; }; @@ -251,7 +250,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_3p3v>; + vmmc-supply = <®_wl>; non-removable; bus-width = <4>; status = "okay"; From d8a6511d988a80dc7b1a83bcc213c6340def3590 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 14 May 2020 09:08:47 +0800 Subject: [PATCH 16/22] ARM: dts: imx6qdl: Use nvmem interface to get fuse data Although ocotp clock is always ON for i.MX6QDL, OCOTP can be accessed directly, but since i.MX6QDL nvmem interface is supported, and fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading ocotp directly, this makes all i.MX6 SoCs aligned. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 47982889d774..0ddb4dfc9b9b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -74,7 +74,8 @@ interrupt-parent = <&gpc>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; #thermal-sensor-cells = <0>; }; @@ -1171,6 +1172,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; tzasc@21d0000 { /* TZASC1 */ From d7e1c2b081b08dbcd8717613407dd9f99f3b9c0f Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 14 May 2020 09:08:48 +0800 Subject: [PATCH 17/22] ARM: dts: imx6sl: Use nvmem interface to get fuse data Although ocotp clock is always ON for i.MX6SL, OCOTP can be accessed directly, but since i.MX6SL nvmem interface is supported, and fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading ocotp directly, this makes all i.MX6 SoCs aligned. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 8230b45057a1..fcb84fe0e032 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -98,7 +98,8 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpc>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; }; @@ -961,6 +962,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; audmux: audmux@21d8000 { From fbf40f4e64ba7eb814aa02b6c4c76a032f877ad6 Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Fri, 15 May 2020 13:41:51 +0200 Subject: [PATCH 18/22] ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio Add the missing input mux for ENET2 mdio. Without this setting, it is not possible to read the MDIO answers back from the PHY. Signed-off-by: Steffen Trumtrar Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index 08ca1608fdb1..69f2c1ec8254 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -592,7 +592,7 @@ #define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 #define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 -#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0574 0x6 0x1 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 #define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 From eb998547a0bd8663245400ca197e28945bd289fe Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 18 May 2020 20:39:53 +0800 Subject: [PATCH 19/22] ARM: dts: imx: make src node name generic Node name should be generic, use "reset-controller" instead of "src" for i.MX6/i.MX7 SoCs src nodes. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- arch/arm/boot/dts/imx6sl.dtsi | 2 +- arch/arm/boot/dts/imx6sx.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 2 +- arch/arm/boot/dts/imx7s.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 0ddb4dfc9b9b..3b442b4493bd 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -858,7 +858,7 @@ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6q-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index fcb84fe0e032..911d8cf77f2c 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -678,7 +678,7 @@ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6sl-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index d6f831731460..e03133740078 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -754,7 +754,7 @@ interrupts = ; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6sx-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 2ccf67c4ac1a..35e730167960 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -676,7 +676,7 @@ interrupts = ; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6ul-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 76e3ffbbbfbf..8bac49137692 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -624,7 +624,7 @@ clock-names = "ckil", "osc"; }; - src: src@30390000 { + src: reset-controller@30390000 { compatible = "fsl,imx7d-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = ; From 1ebc662f5da64aae9a2ad6ca2133ad233ec0682d Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 18 May 2020 20:54:19 +0800 Subject: [PATCH 20/22] ARM: dts: imx50: Add src node interrupt Interrupt is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx50.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 339294df0399..74f49b4aed1a 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -331,6 +331,7 @@ src: src@53fd0000 { compatible = "fsl,imx50-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; From 6a3153e1e0b7d514dcec2833a6b3d7946864508d Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 18 May 2020 20:54:20 +0800 Subject: [PATCH 21/22] ARM: dts: imx5: make src node name generic Node name should be generic, use "reset-controller" instead of "src" for i.MX5 SoCs src nodes. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx50.dtsi | 2 +- arch/arm/boot/dts/imx51.dtsi | 2 +- arch/arm/boot/dts/imx53.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 74f49b4aed1a..1f4ecbca5225 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -328,7 +328,7 @@ status = "disabled"; }; - src: src@53fd0000 { + src: reset-controller@53fd0000 { compatible = "fsl,imx50-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; interrupts = <75>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 3f1e913d5ab8..d3583aad8323 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -439,7 +439,7 @@ status = "disabled"; }; - src: src@73fd0000 { + src: reset-controller@73fd0000 { compatible = "fsl,imx51-src"; reg = <0x73fd0000 0x4000>; interrupts = <75>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 0d06dbdd932c..afa57bf7b0ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -588,7 +588,7 @@ status = "disabled"; }; - src: src@53fd0000 { + src: reset-controller@53fd0000 { compatible = "fsl,imx53-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; interrupts = <75>; From 103515d91832bb837159c37f0cb69d59d68a1dc2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ricardo=20Ca=C3=B1uelo?= Date: Thu, 14 May 2020 16:36:10 +0200 Subject: [PATCH 22/22] ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Group the port definitions of the dvi-converter in a 'ports' node to make it compliant with the ti,tfp410 binding. Signed-off-by: Ricardo Cañuelo Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-cx9020.dts | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index 0a475c234054..cfb18849a92b 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -59,23 +59,26 @@ }; dvi-converter { - #address-cells = <1>; - #size-cells = <0>; compatible = "ti,tfp410"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - tfp410_in: endpoint { - remote-endpoint = <&display0_out>; + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&display0_out>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - tfp410_out: endpoint { - remote-endpoint = <&dvi_connector_in>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; }; }; };