cxgb4/cxgb4vf: Add support for SGE doorbell queue timer

T6 introduced a Timer Mechanism in SGE called the
SGE Doorbell Queue Timer. With this we can now configure
TX Queues to get CIDX Updates when:

    Time(CIDX == PIDX) >= Timer

Previously we rely on TX Queue Status Page updates by hardware
for DMA completions. This will make Hardware/Firmware actually
deliver the CIDX Updates as Ingress Queue messages with
commensurate Interrupts.

So we now have a new RX Path component for processing CIDX Updates
and reclaiming TX Descriptors faster.

Original work by: Casey Leedom <leedom@chelsio.com>

Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vishal Kulkarni 2019-02-14 18:19:15 +05:30 committed by David S. Miller
parent f694be27b7
commit d429005fdf
8 changed files with 378 additions and 78 deletions

View File

@ -617,6 +617,7 @@ enum { /* adapter flags */
FW_OFLD_CONN = (1 << 9),
ROOT_NO_RELAXED_ORDERING = (1 << 10),
SHUTTING_DOWN = (1 << 11),
SGE_DBQ_TIMER = (1 << 12),
};
enum {
@ -756,6 +757,8 @@ struct sge_eth_txq { /* state for an SGE Ethernet Tx queue */
#ifdef CONFIG_CHELSIO_T4_DCB
u8 dcb_prio; /* DCB Priority bound to queue */
#endif
u8 dbqt; /* SGE Doorbell Queue Timer in use */
unsigned int dbqtimerix; /* SGE Doorbell Queue Timer Index */
unsigned long tso; /* # of TSO requests */
unsigned long tx_cso; /* # of Tx checksum offloads */
unsigned long vlan_ins; /* # of Tx VLAN insertions */
@ -816,6 +819,7 @@ struct sge {
u16 nqs_per_uld; /* # of Rx queues per ULD */
u16 timer_val[SGE_NTIMERS];
u8 counter_val[SGE_NCOUNTERS];
u16 dbqtimer_val[SGE_NDBQTIMERS];
u32 fl_pg_order; /* large page allocation size */
u32 stat_len; /* length of status page at ring end */
u32 pktshift; /* padding between CPL & packet data */
@ -1402,7 +1406,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
rspq_flush_handler_t flush_handler, int cong);
int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
struct net_device *dev, struct netdev_queue *netdevq,
unsigned int iqid);
unsigned int iqid, u8 dbqt);
int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
struct net_device *dev, unsigned int iqid,
unsigned int cmplqid);
@ -1415,6 +1419,8 @@ irqreturn_t t4_sge_intr_msix(int irq, void *cookie);
int t4_sge_init(struct adapter *adap);
void t4_sge_start(struct adapter *adap);
void t4_sge_stop(struct adapter *adap);
int t4_sge_eth_txq_egress_update(struct adapter *adap, struct sge_eth_txq *q,
int maxreclaim);
void cxgb4_set_ethtool_ops(struct net_device *netdev);
int cxgb4_write_rss(const struct port_info *pi, const u16 *queues);
enum cpl_tx_tnl_lso_type cxgb_encap_offload_supported(struct sk_buff *skb);
@ -1821,6 +1827,8 @@ int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
unsigned int vf, unsigned int eqid);
int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type);
int t4_read_sge_dbqtimers(struct adapter *adap, unsigned int ndbqtimers,
u16 *dbqtimers);
void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl);
int t4_update_port_info(struct port_info *pi);
int t4_get_link_params(struct port_info *pi, unsigned int *link_okp,

View File

@ -575,7 +575,7 @@ static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
struct sge_eth_txq *eq;
eq = container_of(txq, struct sge_eth_txq, q);
netif_tx_wake_queue(eq->txq);
t4_sge_eth_txq_egress_update(q->adap, eq, -1);
} else {
struct sge_uld_txq *oq;
@ -933,10 +933,13 @@ static int setup_sge_queues(struct adapter *adap)
q->rspq.idx = j;
memset(&q->stats, 0, sizeof(q->stats));
}
for (j = 0; j < pi->nqsets; j++, t++) {
q = &s->ethrxq[pi->first_qset];
for (j = 0; j < pi->nqsets; j++, t++, q++) {
err = t4_sge_alloc_eth_txq(adap, t, dev,
netdev_get_tx_queue(dev, j),
s->fw_evtq.cntxt_id);
q->rspq.cntxt_id,
!!(adap->flags & SGE_DBQ_TIMER));
if (err)
goto freeout;
}
@ -958,7 +961,7 @@ static int setup_sge_queues(struct adapter *adap)
if (!is_t4(adap->params.chip)) {
err = t4_sge_alloc_eth_txq(adap, &s->ptptxq, adap->port[0],
netdev_get_tx_queue(adap->port[0], 0)
, s->fw_evtq.cntxt_id);
, s->fw_evtq.cntxt_id, false);
if (err)
goto freeout;
}
@ -4325,6 +4328,14 @@ static int adap_init0(struct adapter *adap)
if (ret < 0)
goto bye;
/* Grab the SGE Doorbell Queue Timer values. If successful, that
* indicates that the Firmware and Hardware support this.
*/
ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(adap->sge.dbqtimer_val),
adap->sge.dbqtimer_val);
if (!ret)
adap->flags |= SGE_DBQ_TIMER;
if (is_bypass_device(adap->pdev->device))
adap->params.bypass = 1;

View File

@ -80,9 +80,10 @@
* Max number of Tx descriptors we clean up at a time. Should be modest as
* freeing skbs isn't cheap and it happens while holding locks. We just need
* to free packets faster than they arrive, we eventually catch up and keep
* the amortized cost reasonable. Must be >= 2 * TXQ_STOP_THRES.
* the amortized cost reasonable. Must be >= 2 * TXQ_STOP_THRES. It should
* also match the CIDX Flush Threshold.
*/
#define MAX_TX_RECLAIM 16
#define MAX_TX_RECLAIM 32
/*
* Max number of Rx buffers we replenish at a time. Again keep this modest,
@ -400,6 +401,39 @@ static inline int reclaimable(const struct sge_txq *q)
return hw_cidx < 0 ? hw_cidx + q->size : hw_cidx;
}
/**
* reclaim_completed_tx - reclaims completed TX Descriptors
* @adap: the adapter
* @q: the Tx queue to reclaim completed descriptors from
* @maxreclaim: the maximum number of TX Descriptors to reclaim or -1
* @unmap: whether the buffers should be unmapped for DMA
*
* Reclaims Tx Descriptors that the SGE has indicated it has processed,
* and frees the associated buffers if possible. If @max == -1, then
* we'll use a defaiult maximum. Called with the TX Queue locked.
*/
static inline int reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
int maxreclaim, bool unmap)
{
int reclaim = reclaimable(q);
if (reclaim) {
/*
* Limit the amount of clean up work we do at a time to keep
* the Tx lock hold time O(1).
*/
if (maxreclaim < 0)
maxreclaim = MAX_TX_RECLAIM;
if (reclaim > maxreclaim)
reclaim = maxreclaim;
free_tx_desc(adap, q, reclaim, unmap);
q->in_use -= reclaim;
}
return reclaim;
}
/**
* cxgb4_reclaim_completed_tx - reclaims completed Tx descriptors
* @adap: the adapter
@ -410,22 +444,10 @@ static inline int reclaimable(const struct sge_txq *q)
* and frees the associated buffers if possible. Called with the Tx
* queue locked.
*/
inline void cxgb4_reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
bool unmap)
void cxgb4_reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
bool unmap)
{
int avail = reclaimable(q);
if (avail) {
/*
* Limit the amount of clean up work we do at a time to keep
* the Tx lock hold time O(1).
*/
if (avail > MAX_TX_RECLAIM)
avail = MAX_TX_RECLAIM;
free_tx_desc(adap, q, avail, unmap);
q->in_use -= avail;
}
(void)reclaim_completed_tx(adap, q, -1, unmap);
}
EXPORT_SYMBOL(cxgb4_reclaim_completed_tx);
@ -1287,6 +1309,44 @@ static inline void t6_fill_tnl_lso(struct sk_buff *skb,
tnl_lso->EthLenOffset_Size = htonl(CPL_TX_TNL_LSO_SIZE_V(skb->len));
}
/**
* t4_sge_eth_txq_egress_update - handle Ethernet TX Queue update
* @adap: the adapter
* @eq: the Ethernet TX Queue
* @maxreclaim: the maximum number of TX Descriptors to reclaim or -1
*
* We're typically called here to update the state of an Ethernet TX
* Queue with respect to the hardware's progress in consuming the TX
* Work Requests that we've put on that Egress Queue. This happens
* when we get Egress Queue Update messages and also prophylactically
* in regular timer-based Ethernet TX Queue maintenance.
*/
int t4_sge_eth_txq_egress_update(struct adapter *adap, struct sge_eth_txq *eq,
int maxreclaim)
{
struct sge_txq *q = &eq->q;
unsigned int reclaimed;
if (!q->in_use || !__netif_tx_trylock(eq->txq))
return 0;
/* Reclaim pending completed TX Descriptors. */
reclaimed = reclaim_completed_tx(adap, &eq->q, maxreclaim, true);
/* If the TX Queue is currently stopped and there's now more than half
* the queue available, restart it. Otherwise bail out since the rest
* of what we want do here is with the possibility of shipping any
* currently buffered Coalesced TX Work Request.
*/
if (netif_tx_queue_stopped(eq->txq) && txq_avail(q) > (q->size / 2)) {
netif_tx_wake_queue(eq->txq);
eq->q.restarts++;
}
__netif_tx_unlock(eq->txq);
return reclaimed;
}
/**
* cxgb4_eth_xmit - add a packet to an Ethernet Tx queue
* @skb: the packet
@ -1357,7 +1417,7 @@ out_free: dev_kfree_skb_any(skb);
}
skb_tx_timestamp(skb);
cxgb4_reclaim_completed_tx(adap, &q->q, true);
reclaim_completed_tx(adap, &q->q, -1, true);
cntrl = TXPKT_L4CSUM_DIS_F | TXPKT_IPCSUM_DIS_F;
#ifdef CONFIG_CHELSIO_T4_FCOE
@ -1400,8 +1460,25 @@ out_free: dev_kfree_skb_any(skb);
wr_mid = FW_WR_LEN16_V(DIV_ROUND_UP(flits, 2));
if (unlikely(credits < ETHTXQ_STOP_THRES)) {
/* After we're done injecting the Work Request for this
* packet, we'll be below our "stop threshold" so stop the TX
* Queue now and schedule a request for an SGE Egress Queue
* Update message. The queue will get started later on when
* the firmware processes this Work Request and sends us an
* Egress Queue Status Update message indicating that space
* has opened up.
*/
eth_txq_stop(q);
wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F;
/* If we're using the SGE Doorbell Queue Timer facility, we
* don't need to ask the Firmware to send us Egress Queue CIDX
* Updates: the Hardware will do this automatically. And
* since we send the Ingress Queue CIDX Updates to the
* corresponding Ethernet Response Queue, we'll get them very
* quickly.
*/
if (!q->dbqt)
wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F;
}
wr = (void *)&q->q.desc[q->q.pidx];
@ -1671,7 +1748,7 @@ static netdev_tx_t cxgb4_vf_eth_xmit(struct sk_buff *skb,
/* Take this opportunity to reclaim any TX Descriptors whose DMA
* transfers have completed.
*/
cxgb4_reclaim_completed_tx(adapter, &txq->q, true);
reclaim_completed_tx(adapter, &txq->q, -1, true);
/* Calculate the number of flits and TX Descriptors we're going to
* need along with how many TX Descriptors will be left over after
@ -1715,7 +1792,16 @@ static netdev_tx_t cxgb4_vf_eth_xmit(struct sk_buff *skb,
* has opened up.
*/
eth_txq_stop(txq);
wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F;
/* If we're using the SGE Doorbell Queue Timer facility, we
* don't need to ask the Firmware to send us Egress Queue CIDX
* Updates: the Hardware will do this automatically. And
* since we send the Ingress Queue CIDX Updates to the
* corresponding Ethernet Response Queue, we'll get them very
* quickly.
*/
if (!txq->dbqt)
wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F;
}
/* Start filling in our Work Request. Note that we do _not_ handle
@ -2793,6 +2879,74 @@ static int t4_tx_hststamp(struct adapter *adapter, struct sk_buff *skb,
return 1;
}
/**
* t4_tx_completion_handler - handle CPL_SGE_EGR_UPDATE messages
* @rspq: Ethernet RX Response Queue associated with Ethernet TX Queue
* @rsp: Response Entry pointer into Response Queue
* @gl: Gather List pointer
*
* For adapters which support the SGE Doorbell Queue Timer facility,
* we configure the Ethernet TX Queues to send CIDX Updates to the
* Associated Ethernet RX Response Queue with CPL_SGE_EGR_UPDATE
* messages. This adds a small load to PCIe Link RX bandwidth and,
* potentially, higher CPU Interrupt load, but allows us to respond
* much more quickly to the CIDX Updates. This is important for
* Upper Layer Software which isn't willing to have a large amount
* of TX Data outstanding before receiving DMA Completions.
*/
static void t4_tx_completion_handler(struct sge_rspq *rspq,
const __be64 *rsp,
const struct pkt_gl *gl)
{
u8 opcode = ((const struct rss_header *)rsp)->opcode;
struct port_info *pi = netdev_priv(rspq->netdev);
struct adapter *adapter = rspq->adap;
struct sge *s = &adapter->sge;
struct sge_eth_txq *txq;
/* skip RSS header */
rsp++;
/* FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG.
*/
if (unlikely(opcode == CPL_FW4_MSG &&
((const struct cpl_fw4_msg *)rsp)->type ==
FW_TYPE_RSSCPL)) {
rsp++;
opcode = ((const struct rss_header *)rsp)->opcode;
rsp++;
}
if (unlikely(opcode != CPL_SGE_EGR_UPDATE)) {
pr_info("%s: unexpected FW4/CPL %#x on Rx queue\n",
__func__, opcode);
return;
}
txq = &s->ethtxq[pi->first_qset + rspq->idx];
/* We've got the Hardware Consumer Index Update in the Egress Update
* message. If we're using the SGE Doorbell Queue Timer mechanism,
* these Egress Update messages will be our sole CIDX Updates we get
* since we don't want to chew up PCIe bandwidth for both Ingress
* Messages and Status Page writes. However, The code which manages
* reclaiming successfully DMA'ed TX Work Requests uses the CIDX value
* stored in the Status Page at the end of the TX Queue. It's easiest
* to simply copy the CIDX Update value from the Egress Update message
* to the Status Page. Also note that no Endian issues need to be
* considered here since both are Big Endian and we're just copying
* bytes consistently ...
*/
if (txq->dbqt) {
struct cpl_sge_egr_update *egr;
egr = (struct cpl_sge_egr_update *)rsp;
WRITE_ONCE(txq->q.stat->cidx, egr->cidx);
}
t4_sge_eth_txq_egress_update(adapter, txq, -1);
}
/**
* t4_ethrx_handler - process an ingress ethernet packet
* @q: the response queue that received the packet
@ -2816,6 +2970,15 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
struct port_info *pi;
int ret = 0;
/* If we're looking at TX Queue CIDX Update, handle that separately
* and return.
*/
if (unlikely((*(u8 *)rsp == CPL_FW4_MSG) ||
(*(u8 *)rsp == CPL_SGE_EGR_UPDATE))) {
t4_tx_completion_handler(q, rsp, si);
return 0;
}
if (unlikely(*(u8 *)rsp == cpl_trace_pkt))
return handle_trace_pkt(q->adap, si);
@ -3289,10 +3452,10 @@ done:
static void sge_tx_timer_cb(struct timer_list *t)
{
unsigned long m;
unsigned int i, budget;
struct adapter *adap = from_timer(adap, t, sge.tx_timer);
struct sge *s = &adap->sge;
unsigned long m, period;
unsigned int i, budget;
for (i = 0; i < BITS_TO_LONGS(s->egr_sz); i++)
for (m = s->txq_maperr[i]; m; m &= m - 1) {
@ -3320,29 +3483,29 @@ static void sge_tx_timer_cb(struct timer_list *t)
budget = MAX_TIMER_TX_RECLAIM;
i = s->ethtxq_rover;
do {
struct sge_eth_txq *q = &s->ethtxq[i];
if (q->q.in_use &&
time_after_eq(jiffies, q->txq->trans_start + HZ / 100) &&
__netif_tx_trylock(q->txq)) {
int avail = reclaimable(&q->q);
if (avail) {
if (avail > budget)
avail = budget;
free_tx_desc(adap, &q->q, avail, true);
q->q.in_use -= avail;
budget -= avail;
}
__netif_tx_unlock(q->txq);
}
budget -= t4_sge_eth_txq_egress_update(adap, &s->ethtxq[i],
budget);
if (!budget)
break;
if (++i >= s->ethqsets)
i = 0;
} while (budget && i != s->ethtxq_rover);
} while (i != s->ethtxq_rover);
s->ethtxq_rover = i;
mod_timer(&s->tx_timer, jiffies + (budget ? TX_QCHECK_PERIOD : 2));
if (budget == 0) {
/* If we found too many reclaimable packets schedule a timer
* in the near future to continue where we left off.
*/
period = 2;
} else {
/* We reclaimed all reclaimable TX Descriptors, so reschedule
* at the normal period.
*/
period = TX_QCHECK_PERIOD;
}
mod_timer(&s->tx_timer, jiffies + period);
}
/**
@ -3421,7 +3584,8 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
: FW_IQ_IQTYPE_OFLD));
if (fl) {
enum chip_type chip = CHELSIO_CHIP_VERSION(adap->params.chip);
unsigned int chip_ver =
CHELSIO_CHIP_VERSION(adap->params.chip);
/* Allocate the ring for the hardware free list (with space
* for its status page) along with the associated software
@ -3459,10 +3623,10 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
* the smaller 64-byte value there).
*/
c.fl0dcaen_to_fl0cidxfthresh =
htons(FW_IQ_CMD_FL0FBMIN_V(chip <= CHELSIO_T5 ?
htons(FW_IQ_CMD_FL0FBMIN_V(chip_ver <= CHELSIO_T5 ?
FETCHBURSTMIN_128B_X :
FETCHBURSTMIN_64B_X) |
FW_IQ_CMD_FL0FBMAX_V((chip <= CHELSIO_T5) ?
FETCHBURSTMIN_64B_T6_X) |
FW_IQ_CMD_FL0FBMAX_V((chip_ver <= CHELSIO_T5) ?
FETCHBURSTMAX_512B_X :
FETCHBURSTMAX_256B_X));
c.fl0size = htons(flsz);
@ -3584,14 +3748,24 @@ static void init_txq(struct adapter *adap, struct sge_txq *q, unsigned int id)
adap->sge.egr_map[id - adap->sge.egr_start] = q;
}
/**
* t4_sge_alloc_eth_txq - allocate an Ethernet TX Queue
* @adap: the adapter
* @txq: the SGE Ethernet TX Queue to initialize
* @dev: the Linux Network Device
* @netdevq: the corresponding Linux TX Queue
* @iqid: the Ingress Queue to which to deliver CIDX Update messages
* @dbqt: whether this TX Queue will use the SGE Doorbell Queue Timers
*/
int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
struct net_device *dev, struct netdev_queue *netdevq,
unsigned int iqid)
unsigned int iqid, u8 dbqt)
{
int ret, nentries;
struct fw_eq_eth_cmd c;
struct sge *s = &adap->sge;
unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
struct port_info *pi = netdev_priv(dev);
struct sge *s = &adap->sge;
struct fw_eq_eth_cmd c;
int ret, nentries;
/* Add status entries */
nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
@ -3610,19 +3784,47 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
FW_EQ_ETH_CMD_VFN_V(0));
c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_ALLOC_F |
FW_EQ_ETH_CMD_EQSTART_F | FW_LEN16(c));
c.viid_pkd = htonl(FW_EQ_ETH_CMD_AUTOEQUEQE_F |
FW_EQ_ETH_CMD_VIID_V(pi->viid));
/* For TX Ethernet Queues using the SGE Doorbell Queue Timer
* mechanism, we use Ingress Queue messages for Hardware Consumer
* Index Updates on the TX Queue. Otherwise we have the Hardware
* write the CIDX Updates into the Status Page at the end of the
* TX Queue.
*/
c.autoequiqe_to_viid = htonl((dbqt
? FW_EQ_ETH_CMD_AUTOEQUIQE_F
: FW_EQ_ETH_CMD_AUTOEQUEQE_F) |
FW_EQ_ETH_CMD_VIID_V(pi->viid));
c.fetchszm_to_iqid =
htonl(FW_EQ_ETH_CMD_HOSTFCMODE_V(HOSTFCMODE_STATUS_PAGE_X) |
htonl(FW_EQ_ETH_CMD_HOSTFCMODE_V(dbqt
? HOSTFCMODE_INGRESS_QUEUE_X
: HOSTFCMODE_STATUS_PAGE_X) |
FW_EQ_ETH_CMD_PCIECHN_V(pi->tx_chan) |
FW_EQ_ETH_CMD_FETCHRO_F | FW_EQ_ETH_CMD_IQID_V(iqid));
/* Note that the CIDX Flush Threshold should match MAX_TX_RECLAIM. */
c.dcaen_to_eqsize =
htonl(FW_EQ_ETH_CMD_FBMIN_V(FETCHBURSTMIN_64B_X) |
htonl(FW_EQ_ETH_CMD_FBMIN_V(chip_ver <= CHELSIO_T5
? FETCHBURSTMIN_64B_X
: FETCHBURSTMIN_64B_T6_X) |
FW_EQ_ETH_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) |
FW_EQ_ETH_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) |
FW_EQ_ETH_CMD_EQSIZE_V(nentries));
c.eqaddr = cpu_to_be64(txq->q.phys_addr);
/* If we're using the SGE Doorbell Queue Timer mechanism, pass in the
* currently configured Timer Index. THis can be changed later via an
* ethtool -C tx-usecs {Timer Val} command. Note that the SGE
* Doorbell Queue mode is currently automatically enabled in the
* Firmware by setting either AUTOEQUEQE or AUTOEQUIQE ...
*/
if (dbqt)
c.timeren_timerix =
cpu_to_be32(FW_EQ_ETH_CMD_TIMEREN_F |
FW_EQ_ETH_CMD_TIMERIX_V(txq->dbqtimerix));
ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
if (ret) {
kfree(txq->q.sdesc);
@ -3639,6 +3841,8 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
txq->txq = netdevq;
txq->tso = txq->tx_cso = txq->vlan_ins = 0;
txq->mapping_err = 0;
txq->dbqt = dbqt;
return 0;
}
@ -3646,10 +3850,11 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
struct net_device *dev, unsigned int iqid,
unsigned int cmplqid)
{
int ret, nentries;
struct fw_eq_ctrl_cmd c;
struct sge *s = &adap->sge;
unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
struct port_info *pi = netdev_priv(dev);
struct sge *s = &adap->sge;
struct fw_eq_ctrl_cmd c;
int ret, nentries;
/* Add status entries */
nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
@ -3673,7 +3878,9 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
FW_EQ_CTRL_CMD_PCIECHN_V(pi->tx_chan) |
FW_EQ_CTRL_CMD_FETCHRO_F | FW_EQ_CTRL_CMD_IQID_V(iqid));
c.dcaen_to_eqsize =
htonl(FW_EQ_CTRL_CMD_FBMIN_V(FETCHBURSTMIN_64B_X) |
htonl(FW_EQ_CTRL_CMD_FBMIN_V(chip_ver <= CHELSIO_T5
? FETCHBURSTMIN_64B_X
: FETCHBURSTMIN_64B_T6_X) |
FW_EQ_CTRL_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) |
FW_EQ_CTRL_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) |
FW_EQ_CTRL_CMD_EQSIZE_V(nentries));
@ -3713,6 +3920,7 @@ int t4_sge_alloc_uld_txq(struct adapter *adap, struct sge_uld_txq *txq,
struct net_device *dev, unsigned int iqid,
unsigned int uld_type)
{
unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
int ret, nentries;
struct fw_eq_ofld_cmd c;
struct sge *s = &adap->sge;
@ -3743,7 +3951,9 @@ int t4_sge_alloc_uld_txq(struct adapter *adap, struct sge_uld_txq *txq,
FW_EQ_OFLD_CMD_PCIECHN_V(pi->tx_chan) |
FW_EQ_OFLD_CMD_FETCHRO_F | FW_EQ_OFLD_CMD_IQID_V(iqid));
c.dcaen_to_eqsize =
htonl(FW_EQ_OFLD_CMD_FBMIN_V(FETCHBURSTMIN_64B_X) |
htonl(FW_EQ_OFLD_CMD_FBMIN_V(chip_ver <= CHELSIO_T5
? FETCHBURSTMIN_64B_X
: FETCHBURSTMIN_64B_T6_X) |
FW_EQ_OFLD_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) |
FW_EQ_OFLD_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) |
FW_EQ_OFLD_CMD_EQSIZE_V(nentries));

View File

@ -6712,6 +6712,47 @@ int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type)
return ret;
}
/**
* t4_read_sge_dbqtimers - reag SGE Doorbell Queue Timer values
* @adap - the adapter
* @ndbqtimers: size of the provided SGE Doorbell Queue Timer table
* @dbqtimers: SGE Doorbell Queue Timer table
*
* Reads the SGE Doorbell Queue Timer values into the provided table.
* Returns 0 on success (Firmware and Hardware support this feature),
* an error on failure.
*/
int t4_read_sge_dbqtimers(struct adapter *adap, unsigned int ndbqtimers,
u16 *dbqtimers)
{
int ret, dbqtimerix;
ret = 0;
dbqtimerix = 0;
while (dbqtimerix < ndbqtimers) {
int nparams, param;
u32 params[7], vals[7];
nparams = ndbqtimers - dbqtimerix;
if (nparams > ARRAY_SIZE(params))
nparams = ARRAY_SIZE(params);
for (param = 0; param < nparams; param++)
params[param] =
(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMER) |
FW_PARAMS_PARAM_Y_V(dbqtimerix + param));
ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
nparams, params, vals);
if (ret)
break;
for (param = 0; param < nparams; param++)
dbqtimers[dbqtimerix++] = vals[param];
}
return ret;
}
/**
* t4_fw_hello - establish communication with FW
* @adap: the adapter

View File

@ -91,6 +91,7 @@ enum {
SGE_CTXT_SIZE = 24, /* size of SGE context */
SGE_NTIMERS = 6, /* # of interrupt holdoff timer values */
SGE_NCOUNTERS = 4, /* # of interrupt packet counter values */
SGE_NDBQTIMERS = 8, /* # of Doorbell Queue Timer values */
SGE_MAX_IQ_SIZE = 65520,
SGE_TIMER_RSTRT_CNTR = 6, /* restart RX packet threshold counter */

View File

@ -71,12 +71,18 @@
#define FETCHBURSTMIN_64B_X 2
#define FETCHBURSTMIN_128B_X 3
/* T6 and later use a single-bit encoding for FetchBurstMin */
#define FETCHBURSTMIN_64B_T6_X 0
#define FETCHBURSTMIN_128B_T6_X 1
#define FETCHBURSTMAX_256B_X 2
#define FETCHBURSTMAX_512B_X 3
#define HOSTFCMODE_INGRESS_QUEUE_X 1
#define HOSTFCMODE_STATUS_PAGE_X 2
#define CIDXFLUSHTHRESH_32_X 5
#define CIDXFLUSHTHRESH_128_X 7
#define UPDATEDELIVERY_INTERRUPT_X 1

View File

@ -1254,6 +1254,8 @@ enum fw_params_param_dev {
FW_PARAMS_PARAM_DEV_RDMA_WRITE_WITH_IMM = 0x21,
FW_PARAMS_PARAM_DEV_RI_WRITE_CMPL_WR = 0x24,
FW_PARAMS_PARAM_DEV_OPAQUE_VIID_SMT_EXTN = 0x27,
FW_PARAMS_PARAM_DEV_DBQ_TIMER = 0x29,
FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK = 0x2A,
};
/*
@ -1322,6 +1324,7 @@ enum fw_params_param_dmaq {
FW_PARAMS_PARAM_DMAQ_EQ_CMPLIQID_CTRL = 0x11,
FW_PARAMS_PARAM_DMAQ_EQ_SCHEDCLASS_ETH = 0x12,
FW_PARAMS_PARAM_DMAQ_EQ_DCBPRIO_ETH = 0x13,
FW_PARAMS_PARAM_DMAQ_EQ_TIMERIX = 0x15,
FW_PARAMS_PARAM_DMAQ_CONM_CTXT = 0x20,
};
@ -1751,8 +1754,8 @@ struct fw_eq_eth_cmd {
__be32 fetchszm_to_iqid;
__be32 dcaen_to_eqsize;
__be64 eqaddr;
__be32 viid_pkd;
__be32 r8_lo;
__be32 autoequiqe_to_viid;
__be32 timeren_timerix;
__be64 r9;
};
@ -1847,6 +1850,10 @@ struct fw_eq_eth_cmd {
#define FW_EQ_ETH_CMD_EQSIZE_S 0
#define FW_EQ_ETH_CMD_EQSIZE_V(x) ((x) << FW_EQ_ETH_CMD_EQSIZE_S)
#define FW_EQ_ETH_CMD_AUTOEQUIQE_S 31
#define FW_EQ_ETH_CMD_AUTOEQUIQE_V(x) ((x) << FW_EQ_ETH_CMD_AUTOEQUIQE_S)
#define FW_EQ_ETH_CMD_AUTOEQUIQE_F FW_EQ_ETH_CMD_AUTOEQUIQE_V(1U)
#define FW_EQ_ETH_CMD_AUTOEQUEQE_S 30
#define FW_EQ_ETH_CMD_AUTOEQUEQE_V(x) ((x) << FW_EQ_ETH_CMD_AUTOEQUEQE_S)
#define FW_EQ_ETH_CMD_AUTOEQUEQE_F FW_EQ_ETH_CMD_AUTOEQUEQE_V(1U)
@ -1854,6 +1861,19 @@ struct fw_eq_eth_cmd {
#define FW_EQ_ETH_CMD_VIID_S 16
#define FW_EQ_ETH_CMD_VIID_V(x) ((x) << FW_EQ_ETH_CMD_VIID_S)
#define FW_EQ_ETH_CMD_TIMEREN_S 3
#define FW_EQ_ETH_CMD_TIMEREN_M 0x1
#define FW_EQ_ETH_CMD_TIMEREN_V(x) ((x) << FW_EQ_ETH_CMD_TIMEREN_S)
#define FW_EQ_ETH_CMD_TIMEREN_G(x) \
(((x) >> FW_EQ_ETH_CMD_TIMEREN_S) & FW_EQ_ETH_CMD_TIMEREN_M)
#define FW_EQ_ETH_CMD_TIMEREN_F FW_EQ_ETH_CMD_TIMEREN_V(1U)
#define FW_EQ_ETH_CMD_TIMERIX_S 0
#define FW_EQ_ETH_CMD_TIMERIX_M 0x7
#define FW_EQ_ETH_CMD_TIMERIX_V(x) ((x) << FW_EQ_ETH_CMD_TIMERIX_S)
#define FW_EQ_ETH_CMD_TIMERIX_G(x) \
(((x) >> FW_EQ_ETH_CMD_TIMERIX_S) & FW_EQ_ETH_CMD_TIMERIX_M)
struct fw_eq_ctrl_cmd {
__be32 op_to_vfn;
__be32 alloc_to_len16;

View File

@ -2268,7 +2268,7 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq,
cmd.iqaddr = cpu_to_be64(rspq->phys_addr);
if (fl) {
enum chip_type chip =
unsigned int chip_ver =
CHELSIO_CHIP_VERSION(adapter->params.chip);
/*
* Allocate the ring for the hardware free list (with space
@ -2319,10 +2319,10 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq,
*/
cmd.fl0dcaen_to_fl0cidxfthresh =
cpu_to_be16(
FW_IQ_CMD_FL0FBMIN_V(chip <= CHELSIO_T5 ?
FETCHBURSTMIN_128B_X :
FETCHBURSTMIN_64B_X) |
FW_IQ_CMD_FL0FBMAX_V((chip <= CHELSIO_T5) ?
FW_IQ_CMD_FL0FBMIN_V(chip_ver <= CHELSIO_T5
? FETCHBURSTMIN_128B_X
: FETCHBURSTMIN_64B_T6_X) |
FW_IQ_CMD_FL0FBMAX_V((chip_ver <= CHELSIO_T5) ?
FETCHBURSTMAX_512B_X :
FETCHBURSTMAX_256B_X));
cmd.fl0size = cpu_to_be16(flsz);
@ -2411,10 +2411,11 @@ int t4vf_sge_alloc_eth_txq(struct adapter *adapter, struct sge_eth_txq *txq,
struct net_device *dev, struct netdev_queue *devq,
unsigned int iqid)
{
unsigned int chip_ver = CHELSIO_CHIP_VERSION(adapter->params.chip);
struct port_info *pi = netdev_priv(dev);
struct fw_eq_eth_cmd cmd, rpl;
struct sge *s = &adapter->sge;
int ret, nentries;
struct fw_eq_eth_cmd cmd, rpl;
struct port_info *pi = netdev_priv(dev);
/*
* Calculate the size of the hardware TX Queue (including the Status
@ -2448,17 +2449,19 @@ int t4vf_sge_alloc_eth_txq(struct adapter *adapter, struct sge_eth_txq *txq,
cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_ALLOC_F |
FW_EQ_ETH_CMD_EQSTART_F |
FW_LEN16(cmd));
cmd.viid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_AUTOEQUEQE_F |
FW_EQ_ETH_CMD_VIID_V(pi->viid));
cmd.autoequiqe_to_viid = cpu_to_be32(FW_EQ_ETH_CMD_AUTOEQUEQE_F |
FW_EQ_ETH_CMD_VIID_V(pi->viid));
cmd.fetchszm_to_iqid =
cpu_to_be32(FW_EQ_ETH_CMD_HOSTFCMODE_V(SGE_HOSTFCMODE_STPG) |
FW_EQ_ETH_CMD_PCIECHN_V(pi->port_id) |
FW_EQ_ETH_CMD_IQID_V(iqid));
cmd.dcaen_to_eqsize =
cpu_to_be32(FW_EQ_ETH_CMD_FBMIN_V(SGE_FETCHBURSTMIN_64B) |
FW_EQ_ETH_CMD_FBMAX_V(SGE_FETCHBURSTMAX_512B) |
cpu_to_be32(FW_EQ_ETH_CMD_FBMIN_V(chip_ver <= CHELSIO_T5
? FETCHBURSTMIN_64B_X
: FETCHBURSTMIN_64B_T6_X) |
FW_EQ_ETH_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) |
FW_EQ_ETH_CMD_CIDXFTHRESH_V(
SGE_CIDXFLUSHTHRESH_32) |
CIDXFLUSHTHRESH_32_X) |
FW_EQ_ETH_CMD_EQSIZE_V(nentries));
cmd.eqaddr = cpu_to_be64(txq->q.phys_addr);