Merge branches 'ib-mfd-base-acpi-dma-4.3', 'ib-mfd-clocksource-rtc-watchdog-4.3' and 'ib-mfd-i2c-x86-watchdog-4.3' into ibs-for-mfd-merged

Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt

@@ -1,20 +1,23 @@
 STMicroelectronics Low Power Controller (LPC) - RTC
 ===================================================
 
-LPC currently supports Watchdog OR Real Time Clock functionality.
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
 
 [See: ../watchdog/st_lpc_wdt.txt for Watchdog options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
 
 Required properties
 
-- compatible 	: Must be one of: "st,stih407-lpc" "st,stih416-lpc"
-				  "st,stih415-lpc" "st,stid127-lpc"
+- compatible 	: Must be: "st,stih407-lpc"
 - reg		: LPC registers base address + size
 - interrupts    : LPC interrupt line number and associated flags
 - clocks	: Clock used by LPC device (See: ../clock/clock-bindings.txt)
-- st,lpc-mode	: The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
-		  ST_LPC_MODE_WDT [1].  One (and only one) mode must be
-		  selected.
+- st,lpc-mode	: The LPC can run either one of three modes:
+                  ST_LPC_MODE_RTC    [0]
+                  ST_LPC_MODE_WDT    [1]
+                  ST_LPC_MODE_CLKSRC [2]
+		 One (and only one) mode must be selected.
 
 Example:
 	lpc@fde05000 {

Documentation/devicetree/bindings/timer/st,stih407-lpc

@@ -0,0 +1,28 @@
+STMicroelectronics Low Power Controller (LPC) - Clocksource
+===========================================================
+
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
+
+[See: ../watchdog/st_lpc_wdt.txt for Watchdog options]
+[See: ../rtc/rtc-st-lpc.txt for RTC options]
+
+Required properties
+
+- compatible   : Must be: "st,stih407-lpc"
+- reg          : LPC registers base address + size
+- interrupts   : LPC interrupt line number and associated flags
+- clocks       : Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode  : The LPC can run either one of three modes:
+                  ST_LPC_MODE_RTC    [0]
+                  ST_LPC_MODE_WDT    [1]
+                  ST_LPC_MODE_CLKSRC [2]
+		 One (and only one) mode must be selected.
+
+Example:
+       lpc@fde05000 {
+               compatible      = "st,stih407-lpc";
+               reg             = <0xfde05000 0x1000>;
+               clocks          = <&clk_s_d3_flexgen CLK_LPC_0>;
+               st,lpc-mode     = <ST_LPC_MODE_CLKSRC>;
+       };

Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt

@@ -1,9 +1,11 @@
 STMicroelectronics Low Power Controller (LPC) - Watchdog
 ========================================================
 
-LPC currently supports Watchdog OR Real Time Clock functionality.
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
 
 [See: ../rtc/rtc-st-lpc.txt for RTC options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
 
 Required properties
 
@@ -12,9 +14,11 @@ Required properties
 - reg		: LPC registers base address + size
 - interrupts    : LPC interrupt line number and associated flags
 - clocks	: Clock used by LPC device (See: ../clock/clock-bindings.txt)
-- st,lpc-mode	: The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
-		  ST_LPC_MODE_WDT [1].  One (and only one) mode must be
-		  selected.
+- st,lpc-mode	: The LPC can run either one of three modes:
+                  ST_LPC_MODE_RTC    [0]
+                  ST_LPC_MODE_WDT    [1]
+                  ST_LPC_MODE_CLKSRC [2]
+		 One (and only one) mode must be selected.
 
 Required properties [watchdog mode]
 

MAINTAINERS

@@ -1503,6 +1503,7 @@ S:	Maintained
 F:	arch/arm/mach-sti/
 F:	arch/arm/boot/dts/sti*
 F:	drivers/clocksource/arm_global_timer.c
+F:	drivers/clocksource/clksrc_st_lpc.c
 F:	drivers/i2c/busses/i2c-st.c
 F:	drivers/media/rc/st_rc.c
 F:	drivers/mmc/host/sdhci-st.c

drivers/clocksource/Kconfig

@@ -293,4 +293,12 @@ config CLKSRC_IMX_GPT
 	depends on ARM && CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 
+config CLKSRC_ST_LPC
+	bool
+	depends on ARCH_STI
+	select CLKSRC_OF if OF
+	help
+	  Enable this option to use the Low Power controller timer
+	  as clocksource.
+
 endmenu

drivers/clocksource/Makefile

@@ -60,3 +60,4 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300)			+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o

drivers/clocksource/clksrc_st_lpc.c

@@ -0,0 +1,131 @@
+/*
+ * Clocksource using the Low Power Timer found in the Low Power Controller (LPC)
+ *
+ * Copyright (C) 2015 STMicroelectronics – All Rights Reserved
+ *
+ * Author(s): Francesco Virlinzi <francesco.virlinzi@st.com>
+ *	      Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/mfd/st-lpc.h>
+
+/* Low Power Timer */
+#define LPC_LPT_LSB_OFF		0x400
+#define LPC_LPT_MSB_OFF		0x404
+#define LPC_LPT_START_OFF	0x408
+
+static struct st_clksrc_ddata {
+	struct clk		*clk;
+	void __iomem		*base;
+} ddata;
+
+static void __init st_clksrc_reset(void)
+{
+	writel_relaxed(0, ddata.base + LPC_LPT_START_OFF);
+	writel_relaxed(0, ddata.base + LPC_LPT_MSB_OFF);
+	writel_relaxed(0, ddata.base + LPC_LPT_LSB_OFF);
+	writel_relaxed(1, ddata.base + LPC_LPT_START_OFF);
+}
+
+static u64 notrace st_clksrc_sched_clock_read(void)
+{
+	return (u64)readl_relaxed(ddata.base + LPC_LPT_LSB_OFF);
+}
+
+static int __init st_clksrc_init(void)
+{
+	unsigned long rate;
+	int ret;
+
+	st_clksrc_reset();
+
+	rate = clk_get_rate(ddata.clk);
+
+	sched_clock_register(st_clksrc_sched_clock_read, 32, rate);
+
+	ret = clocksource_mmio_init(ddata.base + LPC_LPT_LSB_OFF,
+				    "clksrc-st-lpc", rate, 300, 32,
+				    clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("clksrc-st-lpc: Failed to register clocksource\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __init st_clksrc_setup_clk(struct device_node *np)
+{
+	struct clk *clk;
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("clksrc-st-lpc: Failed to get LPC clock\n");
+		return PTR_ERR(clk);
+	}
+
+	if (clk_prepare_enable(clk)) {
+		pr_err("clksrc-st-lpc: Failed to enable LPC clock\n");
+		return -EINVAL;
+	}
+
+	if (!clk_get_rate(clk)) {
+		pr_err("clksrc-st-lpc: Failed to get LPC clock rate\n");
+		clk_disable_unprepare(clk);
+		return -EINVAL;
+	}
+
+	ddata.clk = clk;
+
+	return 0;
+}
+
+static void __init st_clksrc_of_register(struct device_node *np)
+{
+	int ret;
+	uint32_t mode;
+
+	ret = of_property_read_u32(np, "st,lpc-mode", &mode);
+	if (ret) {
+		pr_err("clksrc-st-lpc: An LPC mode must be provided\n");
+		return;
+	}
+
+	/* LPC can either run as a Clocksource or in RTC or WDT mode */
+	if (mode != ST_LPC_MODE_CLKSRC)
+		return;
+
+	ddata.base = of_iomap(np, 0);
+	if (!ddata.base) {
+		pr_err("clksrc-st-lpc: Unable to map iomem\n");
+		return;
+	}
+
+	if (st_clksrc_setup_clk(np)) {
+		iounmap(ddata.base);
+		return;
+	}
+
+	if (st_clksrc_init()) {
+		clk_disable_unprepare(ddata.clk);
+		clk_put(ddata.clk);
+		iounmap(ddata.base);
+		return;
+	}
+
+	pr_info("clksrc-st-lpc: clocksource initialised - running @ %luHz\n",
+		clk_get_rate(ddata.clk));
+}
+CLOCKSOURCE_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);

drivers/i2c/busses/i2c-i801.c

@@ -88,12 +88,13 @@
 #include <linux/slab.h>
 #include <linux/wait.h>
 #include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/itco_wdt.h>
 
 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
 		defined CONFIG_DMI
 #include <linux/gpio.h>
 #include <linux/i2c-mux-gpio.h>
-#include <linux/platform_device.h>
 #endif
 
 /* I801 SMBus address offsets */
@@ -113,6 +114,16 @@
 #define SMBPCICTL	0x004
 #define SMBPCISTS	0x006
 #define SMBHSTCFG	0x040
+#define TCOBASE		0x050
+#define TCOCTL		0x054
+
+#define ACPIBASE		0x040
+#define ACPIBASE_SMI_OFF	0x030
+#define ACPICTRL		0x044
+#define ACPICTRL_EN		0x080
+
+#define SBREG_BAR		0x10
+#define SBREG_SMBCTRL		0xc6000c
 
 /* Host status bits for SMBPCISTS */
 #define SMBPCISTS_INTS		0x08
@@ -125,6 +136,9 @@
 #define SMBHSTCFG_SMB_SMI_EN	2
 #define SMBHSTCFG_I2C_EN	4
 
+/* TCO configuration bits for TCOCTL */
+#define TCOCTL_EN		0x0100
+
 /* Auxiliary control register bits, ICH4+ only */
 #define SMBAUXCTL_CRC		1
 #define SMBAUXCTL_E32B		2
@@ -221,6 +235,7 @@ struct i801_priv {
 	const struct i801_mux_config *mux_drvdata;
 	struct platform_device *mux_pdev;
 #endif
+	struct platform_device *tco_pdev;
 };
 
 #define FEATURE_SMBUS_PEC	(1 << 0)
@@ -230,6 +245,7 @@ struct i801_priv {
 #define FEATURE_IRQ		(1 << 4)
 /* Not really a feature, but it's convenient to handle it as such */
 #define FEATURE_IDF		(1 << 15)
+#define FEATURE_TCO		(1 << 16)
 
 static const char *i801_feature_names[] = {
 	"SMBus PEC",
@@ -1132,6 +1148,95 @@ static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
 }
 #endif
 
+static const struct itco_wdt_platform_data tco_platform_data = {
+	.name = "Intel PCH",
+	.version = 4,
+};
+
+static DEFINE_SPINLOCK(p2sb_spinlock);
+
+static void i801_add_tco(struct i801_priv *priv)
+{
+	struct pci_dev *pci_dev = priv->pci_dev;
+	struct resource tco_res[3], *res;
+	struct platform_device *pdev;
+	unsigned int devfn;
+	u32 tco_base, tco_ctl;
+	u32 base_addr, ctrl_val;
+	u64 base64_addr;
+
+	if (!(priv->features & FEATURE_TCO))
+		return;
+
+	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
+	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
+	if (!(tco_ctl & TCOCTL_EN))
+		return;
+
+	memset(tco_res, 0, sizeof(tco_res));
+
+	res = &tco_res[ICH_RES_IO_TCO];
+	res->start = tco_base & ~1;
+	res->end = res->start + 32 - 1;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Power Management registers.
+	 */
+	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
+
+	res = &tco_res[ICH_RES_IO_SMI];
+	res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
+	res->end = res->start + 3;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Enable the ACPI I/O space.
+	 */
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
+	ctrl_val |= ACPICTRL_EN;
+	pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
+
+	/*
+	 * We must access the NO_REBOOT bit over the Primary to Sideband
+	 * bridge (P2SB). The BIOS prevents the P2SB device from being
+	 * enumerated by the PCI subsystem, so we need to unhide/hide it
+	 * to lookup the P2SB BAR.
+	 */
+	spin_lock(&p2sb_spinlock);
+
+	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
+
+	/* Unhide the P2SB device */
+	pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
+
+	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
+	base64_addr = base_addr & 0xfffffff0;
+
+	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
+	base64_addr |= (u64)base_addr << 32;
+
+	/* Hide the P2SB device */
+	pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x1);
+	spin_unlock(&p2sb_spinlock);
+
+	res = &tco_res[ICH_RES_MEM_OFF];
+	res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+	res->end = res->start + 3;
+	res->flags = IORESOURCE_MEM;
+
+	pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+						 tco_res, 3, &tco_platform_data,
+						 sizeof(tco_platform_data));
+	if (IS_ERR(pdev)) {
+		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
+		return;
+	}
+
+	priv->tco_pdev = pdev;
+}
+
 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned char temp;
@@ -1149,6 +1254,15 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	priv->pci_dev = dev;
 	switch (dev->device) {
+	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
+	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
+		priv->features |= FEATURE_I2C_BLOCK_READ;
+		priv->features |= FEATURE_IRQ;
+		priv->features |= FEATURE_SMBUS_PEC;
+		priv->features |= FEATURE_BLOCK_BUFFER;
+		priv->features |= FEATURE_TCO;
+		break;
+
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
@@ -1265,6 +1379,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	dev_info(&dev->dev, "SMBus using %s\n",
 		 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
 
+	i801_add_tco(priv);
+
 	/* set up the sysfs linkage to our parent device */
 	priv->adapter.dev.parent = &dev->dev;
 
@@ -1296,6 +1412,8 @@ static void i801_remove(struct pci_dev *dev)
 	i2c_del_adapter(&priv->adapter);
 	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 
+	platform_device_unregister(priv->tco_pdev);
+
 	/*
 	 * do not call pci_disable_device(dev) since it can cause hard hangs on
 	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)

drivers/mfd/lpc_ich.c

@@ -66,6 +66,7 @@
 #include <linux/pci.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/lpc_ich.h>
+#include <linux/platform_data/itco_wdt.h>
 
 #define ACPIBASE		0x40
 #define ACPIBASE_GPE_OFF	0x28
@@ -835,9 +836,31 @@ static void lpc_ich_enable_pmc_space(struct pci_dev *dev)
 	priv->actrl_pbase_save = reg_save;
 }
 
-static void lpc_ich_finalize_cell(struct pci_dev *dev, struct mfd_cell *cell)
+static int lpc_ich_finalize_wdt_cell(struct pci_dev *dev)
+{
+	struct itco_wdt_platform_data *pdata;
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+	struct lpc_ich_info *info;
+	struct mfd_cell *cell = &lpc_ich_cells[LPC_WDT];
+
+	pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	info = &lpc_chipset_info[priv->chipset];
+
+	pdata->version = info->iTCO_version;
+	strlcpy(pdata->name, info->name, sizeof(pdata->name));
+
+	cell->platform_data = pdata;
+	cell->pdata_size = sizeof(*pdata);
+	return 0;
+}
+
+static void lpc_ich_finalize_gpio_cell(struct pci_dev *dev)
 {
 	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+	struct mfd_cell *cell = &lpc_ich_cells[LPC_GPIO];
 
 	cell->platform_data = &lpc_chipset_info[priv->chipset];
 	cell->pdata_size = sizeof(struct lpc_ich_info);
@@ -933,7 +956,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
 	lpc_chipset_info[priv->chipset].use_gpio = ret;
 	lpc_ich_enable_gpio_space(dev);
 
-	lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_GPIO]);
+	lpc_ich_finalize_gpio_cell(dev);
 	ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
 			      &lpc_ich_cells[LPC_GPIO], 1, NULL, 0, NULL);
 
@@ -1007,7 +1030,10 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
 		res->end = base_addr + ACPIBASE_PMC_END;
 	}
 
-	lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
+	ret = lpc_ich_finalize_wdt_cell(dev);
+	if (ret)
+		goto wdt_done;
+
 	ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
 			      &lpc_ich_cells[LPC_WDT], 1, NULL, 0, NULL);
 

drivers/platform/x86/intel_pmc_ipc.c

@@ -33,7 +33,7 @@
 #include <linux/suspend.h>
 #include <linux/acpi.h>
 #include <asm/intel_pmc_ipc.h>
-#include <linux/mfd/lpc_ich.h>
+#include <linux/platform_data/itco_wdt.h>
 
 /*
  * IPC registers
@@ -460,9 +460,9 @@ static struct resource tco_res[] = {
 	},
 };
 
-static struct lpc_ich_info tco_info = {
+static struct itco_wdt_platform_data tco_info = {
 	.name = "Apollo Lake SoC",
-	.iTCO_version = 3,
+	.version = 3,
 };
 
 static int ipc_create_punit_device(void)
@@ -539,8 +539,7 @@ static int ipc_create_tco_device(void)
 		goto err;
 	}
 
-	ret = platform_device_add_data(pdev, &tco_info,
-				       sizeof(struct lpc_ich_info));
+	ret = platform_device_add_data(pdev, &tco_info, sizeof(tco_info));
 	if (ret) {
 		dev_err(ipcdev.dev, "Failed to add tco platform data\n");
 		goto err;

drivers/rtc/rtc-st-lpc.c

@@ -208,7 +208,7 @@ static int st_rtc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	/* LPC can either run in RTC or WDT mode */
+	/* LPC can either run as a Clocksource or in RTC or WDT mode */
 	if (mode != ST_LPC_MODE_RTC)
 		return -ENODEV;
 

drivers/watchdog/Kconfig

@@ -797,7 +797,8 @@ config ITCO_WDT
 	tristate "Intel TCO Timer/Watchdog"
 	depends on (X86 || IA64) && PCI
 	select WATCHDOG_CORE
-	select LPC_ICH
+	select LPC_ICH if !EXPERT
+	select I2C_I801 if !EXPERT
 	---help---
 	  Hardware driver for the intel TCO timer based watchdog devices.
 	  These drivers are included in the Intel 82801 I/O Controller

drivers/watchdog/iTCO_wdt.c

@@ -66,8 +66,7 @@
 #include <linux/spinlock.h>		/* For spin_lock/spin_unlock/... */
 #include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
 #include <linux/io.h>			/* For inb/outb/... */
-#include <linux/mfd/core.h>
-#include <linux/mfd/lpc_ich.h>
+#include <linux/platform_data/itco_wdt.h>
 
 #include "iTCO_vendor.h"
 
@@ -146,59 +145,67 @@ static inline unsigned int ticks_to_seconds(int ticks)
 	return iTCO_wdt_private.iTCO_version == 3 ? ticks : (ticks * 6) / 10;
 }
 
+static inline u32 no_reboot_bit(void)
+{
+	u32 enable_bit;
+
+	switch (iTCO_wdt_private.iTCO_version) {
+	case 3:
+		enable_bit = 0x00000010;
+		break;
+	case 2:
+		enable_bit = 0x00000020;
+		break;
+	case 4:
+	case 1:
+	default:
+		enable_bit = 0x00000002;
+		break;
+	}
+
+	return enable_bit;
+}
+
 static void iTCO_wdt_set_NO_REBOOT_bit(void)
 {
 	u32 val32;
 
 	/* Set the NO_REBOOT bit: this disables reboots */
-	if (iTCO_wdt_private.iTCO_version == 3) {
+	if (iTCO_wdt_private.iTCO_version >= 2) {
 		val32 = readl(iTCO_wdt_private.gcs_pmc);
-		val32 |= 0x00000010;
-		writel(val32, iTCO_wdt_private.gcs_pmc);
-	} else if (iTCO_wdt_private.iTCO_version == 2) {
-		val32 = readl(iTCO_wdt_private.gcs_pmc);
-		val32 |= 0x00000020;
+		val32 |= no_reboot_bit();
 		writel(val32, iTCO_wdt_private.gcs_pmc);
 	} else if (iTCO_wdt_private.iTCO_version == 1) {
 		pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
-		val32 |= 0x00000002;
+		val32 |= no_reboot_bit();
 		pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
 	}
 }
 
 static int iTCO_wdt_unset_NO_REBOOT_bit(void)
 {
-	int ret = 0;
-	u32 val32;
+	u32 enable_bit = no_reboot_bit();
+	u32 val32 = 0;
 
 	/* Unset the NO_REBOOT bit: this enables reboots */
-	if (iTCO_wdt_private.iTCO_version == 3) {
+	if (iTCO_wdt_private.iTCO_version >= 2) {
 		val32 = readl(iTCO_wdt_private.gcs_pmc);
-		val32 &= 0xffffffef;
+		val32 &= ~enable_bit;
 		writel(val32, iTCO_wdt_private.gcs_pmc);
 
 		val32 = readl(iTCO_wdt_private.gcs_pmc);
-		if (val32 & 0x00000010)
-			ret = -EIO;
-	} else if (iTCO_wdt_private.iTCO_version == 2) {
-		val32 = readl(iTCO_wdt_private.gcs_pmc);
-		val32 &= 0xffffffdf;
-		writel(val32, iTCO_wdt_private.gcs_pmc);
-
-		val32 = readl(iTCO_wdt_private.gcs_pmc);
-		if (val32 & 0x00000020)
-			ret = -EIO;
 	} else if (iTCO_wdt_private.iTCO_version == 1) {
 		pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
-		val32 &= 0xfffffffd;
+		val32 &= ~enable_bit;
 		pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
 
 		pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
-		if (val32 & 0x00000002)
-			ret = -EIO;
 	}
 
-	return ret; /* returns: 0 = OK, -EIO = Error */
+	if (val32 & enable_bit)
+		return -EIO;
+
+	return 0;
 }
 
 static int iTCO_wdt_start(struct watchdog_device *wd_dev)
@@ -418,9 +425,9 @@ static int iTCO_wdt_probe(struct platform_device *dev)
 {
 	int ret = -ENODEV;
 	unsigned long val32;
-	struct lpc_ich_info *ich_info = dev_get_platdata(&dev->dev);
+	struct itco_wdt_platform_data *pdata = dev_get_platdata(&dev->dev);
 
-	if (!ich_info)
+	if (!pdata)
 		goto out;
 
 	spin_lock_init(&iTCO_wdt_private.io_lock);
@@ -435,7 +442,7 @@ static int iTCO_wdt_probe(struct platform_device *dev)
 	if (!iTCO_wdt_private.smi_res)
 		goto out;
 
-	iTCO_wdt_private.iTCO_version = ich_info->iTCO_version;
+	iTCO_wdt_private.iTCO_version = pdata->version;
 	iTCO_wdt_private.dev = dev;
 	iTCO_wdt_private.pdev = to_pci_dev(dev->dev.parent);
 
@@ -501,15 +508,24 @@ static int iTCO_wdt_probe(struct platform_device *dev)
 	}
 
 	pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
-		ich_info->name, ich_info->iTCO_version, (u64)TCOBASE);
+		pdata->name, pdata->version, (u64)TCOBASE);
 
 	/* Clear out the (probably old) status */
-	if (iTCO_wdt_private.iTCO_version == 3) {
+	switch (iTCO_wdt_private.iTCO_version) {
+	case 4:
+		outw(0x0008, TCO1_STS);	/* Clear the Time Out Status bit */
+		outw(0x0002, TCO2_STS);	/* Clear SECOND_TO_STS bit */
+		break;
+	case 3:
 		outl(0x20008, TCO1_STS);
-	} else {
+		break;
+	case 2:
+	case 1:
+	default:
 		outw(0x0008, TCO1_STS);	/* Clear the Time Out Status bit */
 		outw(0x0002, TCO2_STS);	/* Clear SECOND_TO_STS bit */
 		outw(0x0004, TCO2_STS);	/* Clear BOOT_STS bit */
+		break;
 	}
 
 	iTCO_wdt_watchdog_dev.bootstatus = 0;

include/dt-bindings/mfd/st-lpc.h

@@ -11,5 +11,6 @@
 
 #define ST_LPC_MODE_RTC		0
 #define ST_LPC_MODE_WDT		1
+#define ST_LPC_MODE_CLKSRC	2
 
 #endif /* __DT_BINDINGS_ST_LPC_H__ */

include/linux/mfd/lpc_ich.h

@@ -20,12 +20,6 @@
 #ifndef LPC_ICH_H
 #define LPC_ICH_H
 
-/* Watchdog resources */
-#define ICH_RES_IO_TCO		0
-#define ICH_RES_IO_SMI		1
-#define ICH_RES_MEM_OFF		2
-#define ICH_RES_MEM_GCS_PMC	0
-
 /* GPIO resources */
 #define ICH_RES_GPIO	0
 #define ICH_RES_GPE0	1

include/linux/platform_data/itco_wdt.h

@@ -0,0 +1,19 @@
+/*
+ * Platform data for the Intel TCO Watchdog
+ */
+
+#ifndef _ITCO_WDT_H_
+#define _ITCO_WDT_H_
+
+/* Watchdog resources */
+#define ICH_RES_IO_TCO		0
+#define ICH_RES_IO_SMI		1
+#define ICH_RES_MEM_OFF		2
+#define ICH_RES_MEM_GCS_PMC	0
+
+struct itco_wdt_platform_data {
+	char name[32];
+	unsigned int version;
+};
+
+#endif /* _ITCO_WDT_H_ */