drm/amdgpu/vpe: fix vpe dpm setup failed

The vpe dpm settings should be done before firmware is loaded.
Otherwise, the frequency cannot be successfully raised.

Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is contained in:
Peyton Lee 2024-04-19 14:07:39 +08:00 committed by Alex Deucher
parent aebd3eb9d3
commit d59198d2d0
2 changed files with 8 additions and 8 deletions

View File

@ -205,7 +205,7 @@ disable_dpm:
dpm_ctl &= 0xfffffffe; /* Disable DPM */
WREG32(vpe_get_reg_offset(vpe, 0, vpe->regs.dpm_enable), dpm_ctl);
dev_dbg(adev->dev, "%s: disable vpe dpm\n", __func__);
return 0;
return -EINVAL;
}
int amdgpu_vpe_psp_update_sram(struct amdgpu_device *adev)

View File

@ -144,6 +144,12 @@ static int vpe_v6_1_load_microcode(struct amdgpu_vpe *vpe)
WREG32(vpe_get_reg_offset(vpe, j, regVPEC_CNTL), ret);
}
/* setup collaborate mode */
vpe_v6_1_set_collaborate_mode(vpe, true);
/* setup DPM */
if (amdgpu_vpe_configure_dpm(vpe))
dev_warn(adev->dev, "VPE failed to enable DPM\n");
/*
* For VPE 6.1.1, still only need to add master's offset, and psp will apply it to slave as well.
* Here use instance 0 as master.
@ -159,11 +165,7 @@ static int vpe_v6_1_load_microcode(struct amdgpu_vpe *vpe)
adev->vpe.cmdbuf_cpu_addr[0] = f32_offset;
adev->vpe.cmdbuf_cpu_addr[1] = f32_cntl;
amdgpu_vpe_psp_update_sram(adev);
vpe_v6_1_set_collaborate_mode(vpe, true);
amdgpu_vpe_configure_dpm(vpe);
return 0;
return amdgpu_vpe_psp_update_sram(adev);
}
vpe_hdr = (const struct vpe_firmware_header_v1_0 *)adev->vpe.fw->data;
@ -196,8 +198,6 @@ static int vpe_v6_1_load_microcode(struct amdgpu_vpe *vpe)
}
vpe_v6_1_halt(vpe, false);
vpe_v6_1_set_collaborate_mode(vpe, true);
amdgpu_vpe_configure_dpm(vpe);
return 0;
}