MIPS updates for v5.7:

- loongson64 irq rework
 - dmi support loongson
 - replace setup_irq() by request_irq()
 - jazz cleanups
 - minor cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl6B2ewaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBNNRAAhaZWpw1eP/cUAqCMH2VU
 vrEFi6hmXJwSE5RFeq5ykLig45ObkkYJnTXbSH8SuOhwH3NBnjYSJuMxpGrsXt7p
 U3NPWCqCqo2Ff+qFJlLvmATYMtpKK58xL5nsY4eXgQwMrki28SMB8L7TYq6nme5q
 zbZeZxOo4k3MTw4fpy1BTMnnssYSyXwaSP5YFBEfRLgJ38ciu2fSmHIKj89z/fnK
 k/xPuBz8Mh8CwKOuaCsFFO27R8Dmj6s9N2YKimP8dt8h/rzDXXH9O9ZxYW5tWvxk
 f04nM3UvfAGdGQKhwR695DmGtXOBcKM/UaW+X2m0LRpV1qFvZ6D9P09zrYzJXHZV
 5NfAzczra+qafuZDCHmq/B2Bv3ddoiiF91zHZ2e59IXAJAXr7bu5CsCy53avWkeG
 EFEXpicTXBWD6OpYOaG8K4SrJS6EZ6JRJJ3lHiqrAeqF/EmD6tmYXavMXHpScdl8
 u0uCCm6Dh4/UxmwwYRTu3pgh6PmB7LAUemKZgMsSGeN4/BiwCrG6Vm/DouxJDMum
 HWSI0LpBzChHiBlT2ldN+AxeH09ovJ9EmYN8pti4ciGMNaLWKCbwcrlj0sZNmcof
 NEhRrdsrHcawVK0xabiDFihDAnWtKiFTz4IaK3i/I8lF+L18fm30SGafT+G2vNhp
 GItmmbmxPmA7qOJVDpwLEUs=
 =OuFQ
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - loongson64 irq rework

 - dmi support loongson

 - replace setup_irq() by request_irq()

 - jazz cleanups

 - minor cleanups and fixes

* tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits)
  MIPS: ralink: mt7621: Fix soc_device introduction
  MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
  MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
  MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC
  MAINTAINERS: Update Loongson64 entry
  MIPS: Loongson64: Load built-in dtbs
  MIPS: Loongson64: Add generic dts
  dt-bindings: mips: Add loongson boards
  MIPS: Loongson64: Drop legacy IRQ code
  dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
  irqchip: Add driver for Loongson-3 HyperTransport PIC controller
  dt-bindings: interrupt-controller: Add Loongson LIOINTC
  irqchip: loongson-liointc: Workaround LPC IRQ Errata
  irqchip: Add driver for Loongson I/O Local Interrupt Controller
  docs: mips: remove no longer needed au1xxx_ide.rst documentation
  MIPS: Alchemy: remove no longer used au1xxx_ide.h header
  ide: remove no longer used au1xxx-ide driver
  MIPS: Add support for Desktop Management Interface (DMI)
  firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
  MIPS: ralink: mt7621: introduce 'soc_device' initialization
  ...
This commit is contained in:
Linus Torvalds 2020-03-31 08:51:45 -07:00
commit d71e064449
136 changed files with 1369 additions and 1924 deletions

View File

@ -0,0 +1,59 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Loongson-3 HyperTransport Interrupt Controller
maintainers:
- Jiaxun Yang <jiaxun.yang@flygoat.com>
allOf:
- $ref: /schemas/interrupt-controller.yaml#
description: |
This interrupt controller is found in the Loongson-3 family of chips to transmit
interrupts from PCH PIC connected on HyperTransport bus.
properties:
compatible:
const: loongson,htpic-1.0
reg:
maxItems: 1
interrupts:
minItems: 1
maxItems: 4
description: |
Four parent interrupts that receive chained interrupts.
interrupt-controller: true
'#interrupt-cells':
const: 1
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
htintc: interrupt-controller@1fb000080 {
compatible = "loongson,htintc-1.0";
reg = <0xfb000080 0x40>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&liointc>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
<25 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>;
};
...

View File

@ -0,0 +1,93 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Loongson Local I/O Interrupt Controller
maintainers:
- Jiaxun Yang <jiaxun.yang@flygoat.com>
description: |
This interrupt controller is found in the Loongson-3 family of chips as the primary
package interrupt controller which can route local I/O interrupt to interrupt lines
of cores.
allOf:
- $ref: /schemas/interrupt-controller.yaml#
properties:
compatible:
oneOf:
- const: loongson,liointc-1.0
- const: loongson,liointc-1.0a
reg:
maxItems: 1
interrupt-controller: true
interrupts:
description:
Interrupt source of the CPU interrupts.
minItems: 1
maxItems: 4
interrupt-names:
description: List of names for the parent interrupts.
items:
- const: int0
- const: int1
- const: int2
- const: int3
minItems: 1
maxItems: 4
'#interrupt-cells':
const: 2
'loongson,parent_int_map':
description: |
This property points how the children interrupts will be mapped into CPU
interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
and each bit in the cell refers to a children interrupt fron 0 to 31.
If a CPU interrupt line didn't connected with liointc, then keep it's
cell with zero.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
minItems: 4
maxItems: 4
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
- 'loongson,parent_int_map'
examples:
- |
iointc: interrupt-controller@3ff01400 {
compatible = "loongson,liointc-1.0";
reg = <0x3ff01400 0x64>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&cpuintc>;
interrupts = <2>, <3>;
interrupt-names = "int0", "int1";
loongson,parent_int_map = <0xf0ffffff>, /* int0 */
<0x0f000000>, /* int1 */
<0x00000000>, /* int2 */
<0x00000000>; /* int3 */
};
...

View File

@ -0,0 +1,27 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Loongson based Platforms Device Tree Bindings
maintainers:
- Jiaxun Yang <jiaxun.yang@flygoat.com>
description: |
Devices with a Loongson CPU shall have the following properties.
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: Generic Loongson3 Quad Core + RS780E
items:
- const: loongson,loongson3-4core-rs780e
- description: Generic Loongson3 Octa Core + RS780E
items:
- const: loongson,loongson3-8core-rs780e
...

View File

@ -1,130 +0,0 @@
.. include:: <isonum.txt>
======================
MIPS AU1XXX IDE driver
======================
Released 2005-07-15
About
=====
This file describes the 'drivers/ide/au1xxx-ide.c', related files and the
services they provide.
If you are short in patience and just want to know how to add your hard disc to
the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
section.
License
=======
:Copyright: |copy| 2003-2005 AMD, Personal Connectivity Solutions
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later
version.
THIS SOFTWARE IS PROVIDED ``AS IS`` AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
675 Mass Ave, Cambridge, MA 02139, USA.
Note:
for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
Interface and Linux Device Driver" Application Note.
Files, Configs and Compatibility
================================
Two files are introduced:
a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
contains : struct _auide_hwif
- timing parameters for PIO mode 0/1/2/3/4
- timing parameters for MWDMA 0/1/2
b) 'drivers/ide/mips/au1xxx-ide.c'
contains the functionality of the AU1XXX IDE driver
Following extra configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
- enable the PIO+DBDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- enable the MWDMA mode
Supported IDE Modes
===================
The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
To change the PIO mode use the program hdparm with option -p, e.g.
'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
Performance Configurations
==========================
If the used system doesn't need USB support enable the following kernel
configs::
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
CONFIG_BLK_DEV_IDEDMA=y
Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
the burst support on DBDMA controller.
If the used system need the USB support enable the following kernel configs for
high IDE to USB throughput.
::
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
CONFIG_BLK_DEV_IDEDMA=y
Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
disable the burst support on DBDMA controller.
Acknowledgments
===============
These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
IDE driver from AMD.
Additional input also from:
Matthias Lenk <matthias.lenk@amd.com>
Happy hacking!
Enrico Walther <enrico.walther@amd.com>

View File

@ -10,8 +10,6 @@ MIPS-specific Documentation
ingenic-tcu
au1xxx_ide
.. only:: subproject and html
Indices

View File

@ -11202,6 +11202,7 @@ S: Maintained
F: arch/mips/loongson64/
F: arch/mips/include/asm/mach-loongson64/
F: drivers/platform/mips/cpu_hwmon.c
F: drivers/irqchip/irq-loongson*
F: drivers/*/*loongson3*
F: drivers/*/*/*loongson3*

View File

@ -486,9 +486,11 @@ config MACH_LOONGSON64
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT
select LOONGSON_MC146818
select ZONE_DMA32
select NUMA
select COMMON_CLK
select USE_OF
select BUILTIN_DTB
help
This enables the support of Loongson-2/3 family of machines.
@ -973,6 +975,9 @@ config CAVIUM_OCTEON_SOC
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
select HAVE_PCI
select HAVE_PLAT_DELAY
select HAVE_PLAT_FW_INIT_CMDLINE
select HAVE_PLAT_MEMCPY
select ZONE_DMA32
select HOLES_IN_ZONE
select GPIOLIB
@ -1229,6 +1234,15 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN
bool
select GENERIC_ISA_DMA
config HAVE_PLAT_DELAY
bool
config HAVE_PLAT_FW_INIT_CMDLINE
bool
config HAVE_PLAT_MEMCPY
bool
config ISA_DMA_API
bool
@ -2676,7 +2690,7 @@ config NUMA
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option improves performance on systems with more
than two nodes; on two node systems it is generally better to
leave it disabled; on single node systems disable this option
leave it disabled; on single node systems leave this option
disabled.
config SYS_SUPPORTS_NUMA
@ -2758,6 +2772,17 @@ config HW_PERF_EVENTS
Enable hardware performance counter support for perf events. If
disabled, perf events will use software events only.
config DMI
bool "Enable DMI scanning"
depends on MACH_LOONGSON64
select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
default y
help
Enabled scanning of DMI to identify machine quirks. Say Y
here unless you have verified that your setup is not
affected by entries in the DMI blacklist. Required by PNP
BIOS code.
config SMP
bool "Multi-Processing support"
depends on SYS_SUPPORTS_SMP
@ -3070,7 +3095,7 @@ endchoice
choice
prompt "Kernel command line type" if !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
!MIPS_MALTA && \
!MACH_LOONGSON64 && !MIPS_MALTA && \
!CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER

View File

@ -72,13 +72,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
.cpumask = cpu_possible_mask,
};
static struct irqaction au1x_rtcmatch2_irqaction = {
.handler = au1x_rtcmatch2_irq,
.flags = IRQF_TIMER,
.name = "timer",
.dev_id = &au1x_rtcmatch2_clockdev,
};
static int __init alchemy_time_init(unsigned int m2int)
{
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
@ -130,7 +123,9 @@ static int __init alchemy_time_init(unsigned int m2int)
cd->min_delta_ns = clockevent_delta2ns(9, cd);
cd->min_delta_ticks = 9; /* ~0.28ms */
clockevents_register_device(cd);
setup_irq(m2int, &au1x_rtcmatch2_irqaction);
if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
&au1x_rtcmatch2_clockdev))
pr_err("Failed to register timer interrupt\n");
printk(KERN_INFO "Alchemy clocksource installed\n");

View File

@ -83,12 +83,6 @@ static struct irq_chip ar7_sec_irq_type = {
.irq_ack = ar7_ack_sec_irq,
};
static struct irqaction ar7_cascade_action = {
.handler = no_action,
.name = "AR7 cascade interrupt",
.flags = IRQF_NO_THREAD,
};
static void __init ar7_irq_init(int base)
{
int i;
@ -116,8 +110,14 @@ static void __init ar7_irq_init(int base)
handle_level_irq);
}
setup_irq(2, &ar7_cascade_action);
setup_irq(ar7_irq_base, &ar7_cascade_action);
if (request_irq(2, no_action, IRQF_NO_THREAD, "AR7 cascade interrupt",
NULL))
pr_err("Failed to request irq 2 (AR7 cascade interrupt)\n");
if (request_irq(ar7_irq_base, no_action, IRQF_NO_THREAD,
"AR7 cascade interrupt", NULL)) {
pr_err("Failed to request irq %d (AR7 cascade interrupt)\n",
ar7_irq_base);
}
set_c0_status(IE_IRQ0);
}

View File

@ -64,11 +64,6 @@ static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ar2315_ahb_err_interrupt = {
.handler = ar2315_ahb_err_handler,
.name = "ar2315-ahb-error",
};
static void ar2315_misc_irq_handler(struct irq_desc *desc)
{
u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
@ -159,7 +154,9 @@ void __init ar2315_arch_init_irq(void)
panic("Failed to add IRQ domain");
irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
setup_irq(irq, &ar2315_ahb_err_interrupt);
if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
NULL))
pr_err("Failed to register ar2315-ahb-error interrupt\n");
irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
ar2315_misc_irq_handler, domain);

View File

@ -68,11 +68,6 @@ static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ar5312_ahb_err_interrupt = {
.handler = ar5312_ahb_err_handler,
.name = "ar5312-ahb-error",
};
static void ar5312_misc_irq_handler(struct irq_desc *desc)
{
u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
@ -154,7 +149,9 @@ void __init ar5312_arch_init_irq(void)
panic("Failed to add IRQ domain");
irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
setup_irq(irq, &ar5312_ahb_err_interrupt);
if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error",
NULL))
pr_err("Failed to register ar5312-ahb-error interrupt\n");
irq_set_chained_handler_and_data(AR5312_IRQ_MISC,
ar5312_misc_irq_handler, domain);

View File

@ -15,7 +15,7 @@
#include <linux/memblock.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_clk.h>
#include <linux/of_fdt.h>
#include <linux/irqchip.h>

View File

@ -399,26 +399,6 @@ static struct irq_chip bcm63xx_external_irq_chip = {
.irq_set_type = bcm63xx_external_irq_set_type,
};
static struct irqaction cpu_ip2_cascade_action = {
.handler = no_action,
.name = "cascade_ip2",
.flags = IRQF_NO_THREAD,
};
#ifdef CONFIG_SMP
static struct irqaction cpu_ip3_cascade_action = {
.handler = no_action,
.name = "cascade_ip3",
.flags = IRQF_NO_THREAD,
};
#endif
static struct irqaction cpu_ext_cascade_action = {
.handler = no_action,
.name = "cascade_extirq",
.flags = IRQF_NO_THREAD,
};
static void bcm63xx_init_irq(void)
{
int irq_bits;
@ -531,7 +511,7 @@ static void bcm63xx_init_irq(void)
void __init arch_init_irq(void)
{
int i;
int i, irq;
bcm63xx_init_irq();
mips_cpu_irq_init();
@ -544,14 +524,25 @@ void __init arch_init_irq(void)
handle_edge_irq);
if (!is_ext_irq_cascaded) {
for (i = 3; i < 3 + ext_irq_count; ++i)
setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
for (i = 3; i < 3 + ext_irq_count; ++i) {
irq = MIPS_CPU_IRQ_BASE + i;
if (request_irq(irq, no_action, IRQF_NO_THREAD,
"cascade_extirq", NULL)) {
pr_err("Failed to request irq %d (cascade_extirq)\n",
irq);
}
}
}
setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
irq = MIPS_CPU_IRQ_BASE + 2;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade_ip2", NULL))
pr_err("Failed to request irq %d (cascade_ip2)\n", irq);
#ifdef CONFIG_SMP
if (is_ext_irq_cascaded) {
setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
irq = MIPS_CPU_IRQ_BASE + 3;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade_ip3",
NULL))
pr_err("Failed to request irq %d (cascade_ip3)\n", irq);
bcm63xx_internal_irq_chip.irq_set_affinity =
bcm63xx_internal_set_affinity;

View File

@ -10,11 +10,11 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/memblock.h>
#include <linux/clk-provider.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_clk.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/libfdt.h>

View File

@ -4,6 +4,7 @@ subdir-y += cavium-octeon
subdir-y += img
subdir-y += ingenic
subdir-y += lantiq
subdir-y += loongson
subdir-y += mscc
subdir-y += mti
subdir-y += netlogic

View File

@ -4,6 +4,7 @@
#include "jz4780.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/regulator/active-semi,8865-regulator.h>
@ -27,6 +28,17 @@
0x30000000 0x30000000>;
};
gpio-keys {
compatible = "gpio-keys";
sw1 {
label = "ci20:sw1";
linux,code = <KEY_F13>;
gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
@ -58,10 +70,17 @@
eth0_power: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "eth0_power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
enable-active-high;
};
ir: ir {
compatible = "gpio-ir-receiver";
gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
};
wlan0_power: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "wlan0_power";

View File

@ -0,0 +1,4 @@
# SPDX_License_Identifier: GPL_2.0
dtb-$(CONFIG_MACH_LOONGSON64) += loongson3_4core_rs780e.dtb loongson3_8core_rs780e.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))

View File

@ -0,0 +1,64 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/interrupt-controller/irq.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
package0: bus@1fe00000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
0 0x3ff00000 0 0x3ff00000 0x100000
/* 3A HT Config Space */
0xefd 0xfb000000 0xefd 0xfb000000 0x10000000
/* 3B HT Config Space */
0x1efd 0xfb000000 0x1efd 0xfb000000 0x10000000>;
liointc: interrupt-controller@3ff01400 {
compatible = "loongson,liointc-1.0";
reg = <0 0x3ff01400 0x64>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&cpuintc>;
interrupts = <2>, <3>;
interrupt-names = "int0", "int1";
loongson,parent_int_map = <0xf0ffffff>, /* int0 */
<0x0f000000>, /* int1 */
<0x00000000>, /* int2 */
<0x00000000>; /* int3 */
};
cpu_uart0: serial@1fe001e0 {
compatible = "ns16550a";
reg = <0 0x1fe001e0 0x8>;
clock-frequency = <33000000>;
interrupt-parent = <&liointc>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
cpu_uart1: serial@1fe001e8 {
status = "disabled";
compatible = "ns16550a";
reg = <0 0x1fe001e8 0x8>;
clock-frequency = <33000000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc>;
no-loopback-test;
};
};
};

View File

@ -0,0 +1,25 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "loongson3-package.dtsi"
#include "rs780e-pch.dtsi"
/ {
compatible = "loongson,loongson3-4core-rs780e";
};
&package0 {
htpic: interrupt-controller@efdfb000080 {
compatible = "loongson,htpic-1.0";
reg = <0xefd 0xfb000080 0x40>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&liointc>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
<25 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>;
};
};

View File

@ -0,0 +1,25 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "loongson3-package.dtsi"
#include "rs780e-pch.dtsi"
/ {
compatible = "loongson,loongson3-8core-rs780e";
};
&package0 {
htpic: interrupt-controller@1efdfb000080 {
compatible = "loongson,htpic-1.0";
reg = <0x1efd 0xfb000080 0x40>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&liointc>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
<25 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>;
};
};

View File

@ -0,0 +1,26 @@
// SPDX-License-Identifier: GPL-2.0
/ {
bus@10000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0x10000000 0 0x10000000 0 0x10000000
0 0x40000000 0 0x40000000 0 0x40000000
0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>;
isa {
compatible = "isa";
#address-cells = <2>;
#size-cells = <1>;
ranges = <1 0 0 0 0x1000>;
rtc0: rtc@70 {
compatible = "motorola,mc146818";
reg = <1 0x70 0x8>;
interrupts = <8>;
interrupt-parent = <&htpic>;
};
};
};
};

View File

@ -2199,6 +2199,9 @@ static int octeon_irq_cib_map(struct irq_domain *d,
}
cd = kzalloc(sizeof(*cd), GFP_KERNEL);
if (!cd)
return -ENOMEM;
cd->host_data = host_data;
cd->bit = hw;

View File

@ -45,18 +45,20 @@ asmlinkage void plat_irq_dispatch(void)
spurious_interrupt();
}
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
{
mips_cpu_irq_init();
gt641xx_irq_init();
init_i8259_irqs();
setup_irq(GT641XX_CASCADE_IRQ, &cascade);
setup_irq(I8259_CASCADE_IRQ, &cascade);
if (request_irq(GT641XX_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
"cascade", NULL)) {
pr_err("Failed to request irq %d (cascade)\n",
GT641XX_CASCADE_IRQ);
}
if (request_irq(I8259_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
"cascade", NULL)) {
pr_err("Failed to request irq %d (cascade)\n",
I8259_CASCADE_IRQ);
}
}

View File

@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y

View File

@ -22,7 +22,6 @@ CONFIG_HZ_100=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y

View File

@ -23,7 +23,6 @@ CONFIG_PCI=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y

View File

@ -21,8 +21,6 @@ CONFIG_PCI=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_BCM63XX=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y

View File

@ -12,8 +12,6 @@ CONFIG_NR_CPUS=4
# CONFIG_SECCOMP is not set
CONFIG_MIPS_O32_FP64_SUPPORT=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y

View File

@ -21,8 +21,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_BMIPS_CPUFREQ=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y

View File

@ -1,4 +1,5 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_MODULES=y
CONFIG_KERNEL_XZ=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -88,12 +89,14 @@ CONFIG_I2C_JZ4780=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_KEYBOARD_GPIO=m
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_JZ4740_WDT=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_ACT8865=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
@ -166,3 +169,21 @@ CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LIRC=y
CONFIG_MEDIA_SUPPORT=m
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIO_TX=m

View File

@ -28,7 +28,6 @@ CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_DEFAULT_NOOP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_NET=y

View File

@ -19,7 +19,6 @@ CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BLOCK=y

View File

@ -1,15 +1,17 @@
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MACH_JAZZ=y
CONFIG_OLIVETTI_M700=y
CONFIG_MIPS_MAGNUM_4000=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
@ -18,168 +20,17 @@ CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_IPIP=m
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE=m
CONFIG_DECNET=m
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_HAMRADIO=y
CONFIG_AX25=m
CONFIG_NETROM=m
CONFIG_ROSE=m
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_CONNECTOR=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_1284=y
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@ -194,26 +45,12 @@ CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_JAZZ_ESP=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_ATA=y
CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
@ -221,28 +58,18 @@ CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_MIPS_JAZZ_SONIC=y
CONFIG_NE2000=m
CONFIG_PHYLIB=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_PLIP=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_RAW=m
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_PRINTER=m
CONFIG_PPDEV=m
# CONFIG_HW_RANDOM is not set
CONFIG_W1=m
CONFIG_FB=y
CONFIG_FB_G364=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_HWMON is not set
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=y
@ -263,78 +90,8 @@ CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_CIFS=m
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC_CCITT=m

View File

@ -16,8 +16,6 @@ CONFIG_HZ_1000=y
# CONFIG_SECCOMP is not set
CONFIG_PCI=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y

View File

@ -26,7 +26,7 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_MQ_IOSCHED_DEADLINE=m
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=y

View File

@ -38,8 +38,9 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_MQ_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BINFMT_MISC=m
CONFIG_KSM=y
CONFIG_NET=y

View File

@ -14,8 +14,6 @@ CONFIG_PCI=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y

View File

@ -14,8 +14,6 @@ CONFIG_HZ_128=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y

View File

@ -23,7 +23,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y

View File

@ -21,7 +21,6 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_COREDUMP is not set
# CONFIG_COMPACTION is not set
CONFIG_NET=y

View File

@ -23,7 +23,6 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_COREDUMP is not set
# CONFIG_COMPACTION is not set
CONFIG_NET=y

View File

@ -103,28 +103,8 @@ int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2] = {
int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
int *fpu_kstat_irq;
static struct irqaction ioirq = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
static struct irqaction fpuirq = {
.handler = no_action,
.name = "fpu",
.flags = IRQF_NO_THREAD,
};
static struct irqaction busirq = {
.name = "bus error",
.flags = IRQF_NO_THREAD,
};
static struct irqaction haltirq = {
.handler = dec_intr_halt,
.name = "halt",
.flags = IRQF_NO_THREAD,
};
static irq_handler_t busirq_handler;
static unsigned int busirq_flags = IRQF_NO_THREAD;
/*
* Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
@ -134,21 +114,21 @@ static void __init dec_be_init(void)
switch (mips_machtype) {
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
board_be_handler = dec_kn01_be_handler;
busirq.handler = dec_kn01_be_interrupt;
busirq.flags |= IRQF_SHARED;
busirq_handler = dec_kn01_be_interrupt;
busirq_flags |= IRQF_SHARED;
dec_kn01_be_init();
break;
case MACH_DS5000_1XX: /* DS5000/1xx 3min */
case MACH_DS5000_XX: /* DS5000/xx Maxine */
board_be_handler = dec_kn02xa_be_handler;
busirq.handler = dec_kn02xa_be_interrupt;
busirq_handler = dec_kn02xa_be_interrupt;
dec_kn02xa_be_init();
break;
case MACH_DS5000_200: /* DS5000/200 3max */
case MACH_DS5000_2X0: /* DS5000/240 3max+ */
case MACH_DS5900: /* DS5900 bigmax */
board_be_handler = dec_ecc_be_handler;
busirq.handler = dec_ecc_be_interrupt;
busirq_handler = dec_ecc_be_interrupt;
dec_ecc_be_init();
break;
}
@ -764,20 +744,29 @@ void __init arch_init_irq(void)
int irq_fpu;
irq_fpu = dec_interrupt[DEC_IRQ_FPU];
setup_irq(irq_fpu, &fpuirq);
if (request_irq(irq_fpu, no_action, IRQF_NO_THREAD, "fpu",
NULL))
pr_err("Failed to register fpu interrupt\n");
desc_fpu = irq_to_desc(irq_fpu);
fpu_kstat_irq = this_cpu_ptr(desc_fpu->kstat_irqs);
}
if (dec_interrupt[DEC_IRQ_CASCADE] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_CASCADE], &ioirq);
if (dec_interrupt[DEC_IRQ_CASCADE] >= 0) {
if (request_irq(dec_interrupt[DEC_IRQ_CASCADE], no_action,
IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to register cascade interrupt\n");
}
/* Register the bus error interrupt. */
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq.handler)
setup_irq(dec_interrupt[DEC_IRQ_BUS], &busirq);
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
busirq_flags, "bus error", busirq_handler))
pr_err("Failed to register bus error interrupt\n");
}
/* Register the HALT interrupt. */
if (dec_interrupt[DEC_IRQ_HALT] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
if (dec_interrupt[DEC_IRQ_HALT] >= 0) {
if (request_irq(dec_interrupt[DEC_IRQ_HALT], dec_intr_halt,
IRQF_NO_THREAD, "halt", NULL))
pr_err("Failed to register halt interrupt\n");
}
}
asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)

View File

@ -153,14 +153,6 @@ void emma2rh_gpio_irq_init(void)
handle_edge_irq, "edge");
}
static struct irqaction irq_cascade = {
.handler = no_action,
.flags = IRQF_NO_THREAD,
.name = "cascade",
.dev_id = NULL,
.next = NULL,
};
/*
* the first level int-handler will jump here if it is a emma2rh irq
*/
@ -236,6 +228,7 @@ void emma2rh_irq_dispatch(void)
void __init arch_init_irq(void)
{
u32 reg;
int irq;
/* by default, interrupts are disabled. */
emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
@ -272,9 +265,15 @@ void __init arch_init_irq(void)
mips_cpu_irq_init();
/* setup cascade interrupts */
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
setup_irq(MIPS_CPU_IRQ_BASE + 2, &irq_cascade);
irq = EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
irq = EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
irq = MIPS_CPU_IRQ_BASE + 2;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
}
asmlinkage void plat_irq_dispatch(void)

View File

@ -16,6 +16,7 @@ int fw_argc;
int *_fw_argv;
int *_fw_envp;
#ifndef CONFIG_HAVE_PLAT_FW_INIT_CMDLINE
void __init fw_init_cmdline(void)
{
int i;
@ -41,6 +42,7 @@ void __init fw_init_cmdline(void)
strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
}
#endif
char * __init fw_getcmdline(void)
{

View File

@ -5,10 +5,10 @@
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/of_clk.h>
#include <linux/of_fdt.h>
#include <asm/bootinfo.h>

View File

@ -0,0 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_DMI_H
#define _ASM_DMI_H
#include <linux/io.h>
#include <linux/memblock.h>
#define dmi_early_remap(x, l) ioremap_cache(x, l)
#define dmi_early_unmap(x, l) iounmap(x)
#define dmi_remap(x, l) ioremap_cache(x, l)
#define dmi_unmap(x) iounmap(x)
/* MIPS initialize DMI scan before SLAB is ready, so we use memblock here */
#define dmi_alloc(l) memblock_alloc_low(l, PAGE_SIZE)
#if defined(CONFIG_MACH_LOONGSON64)
#define SMBIOS_ENTRY_POINT_SCAN_START 0xFFFE000
#endif
#endif /* _ASM_DMI_H */

View File

@ -445,6 +445,9 @@ extern unsigned int elf_hwcap;
#define ELF_PLATFORM __elf_platform
extern const char *__elf_platform;
#define ELF_BASE_PLATFORM __elf_base_platform
extern const char *__elf_base_platform;
/*
* See comments in asm-alpha/elf.h, this is the same thing
* on the MIPS.

View File

@ -36,6 +36,7 @@ extern raw_spinlock_t i8259A_lock;
extern void make_8259A_irq(unsigned int irq);
extern void init_i8259_irqs(void);
extern struct irq_domain *__init_i8259_irqs(struct device_node *node);
/**
* i8159_set_poll() - Override the i8259 polling function

View File

@ -11,6 +11,6 @@
#define NR_IRQS 256
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __ASM_AR7_IRQ_H */

View File

@ -27,6 +27,6 @@
#define ATH79_IP3_IRQ_COUNT 3
#define ATH79_IP3_IRQ(_x) (ATH79_IP3_IRQ_BASE + (_x))
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __ASM_MACH_ATH79_IRQ_H */

View File

@ -1,178 +0,0 @@
/*
* include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
*
* BRIEF MODULE DESCRIPTION
* AMD Alchemy Au1xxx IDE interface routines over the Static Bus
*
* Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any later
* version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
* Interface and Linux Device Driver" Application Note.
*/
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
#define DMA_WAIT_TIMEOUT 100
#define NUM_DESCRIPTORS PRD_ENTRIES
#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
#define NUM_DESCRIPTORS 2
#endif
#ifndef AU1XXX_ATA_RQSIZE
#define AU1XXX_ATA_RQSIZE 128
#endif
/* Disable Burstable-Support for DBDMA */
#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
typedef struct {
u32 tx_dev_id, rx_dev_id, target_dev_id;
u32 tx_chan, rx_chan;
void *tx_desc_head, *rx_desc_head;
ide_hwif_t *hwif;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
ide_drive_t *drive;
struct dbdma_cmd *dma_table_cpu;
dma_addr_t dma_table_dma;
#endif
int irq;
u32 regbase;
int ddma_id;
} _auide_hwif;
/******************************************************************************/
/* PIO Mode timing calculation : */
/* */
/* Static Bus Spec ATA Spec */
/* Tcsoe = t1 */
/* Toecs = t9 */
/* Twcs = t9 */
/* Tcsh = t2i | t2 */
/* Tcsoff = t2i | t2 */
/* Twp = t2 */
/* Tcsw = t1 */
/* Tpm = 0 */
/* Ta = t1+t2 */
/******************************************************************************/
#define TCSOE_MASK (0x07 << 29)
#define TOECS_MASK (0x07 << 26)
#define TWCS_MASK (0x07 << 28)
#define TCSH_MASK (0x0F << 24)
#define TCSOFF_MASK (0x07 << 20)
#define TWP_MASK (0x3F << 14)
#define TCSW_MASK (0x0F << 10)
#define TPM_MASK (0x0F << 6)
#define TA_MASK (0x3F << 0)
#define TS_MASK (1 << 8)
/* Timing parameters PIO mode 0 */
#define SBC_IDE_PIO0_TCSOE (0x04 << 29)
#define SBC_IDE_PIO0_TOECS (0x01 << 26)
#define SBC_IDE_PIO0_TWCS (0x02 << 28)
#define SBC_IDE_PIO0_TCSH (0x08 << 24)
#define SBC_IDE_PIO0_TCSOFF (0x07 << 20)
#define SBC_IDE_PIO0_TWP (0x10 << 14)
#define SBC_IDE_PIO0_TCSW (0x04 << 10)
#define SBC_IDE_PIO0_TPM (0x00 << 6)
#define SBC_IDE_PIO0_TA (0x15 << 0)
/* Timing parameters PIO mode 1 */
#define SBC_IDE_PIO1_TCSOE (0x03 << 29)
#define SBC_IDE_PIO1_TOECS (0x01 << 26)
#define SBC_IDE_PIO1_TWCS (0x01 << 28)
#define SBC_IDE_PIO1_TCSH (0x06 << 24)
#define SBC_IDE_PIO1_TCSOFF (0x06 << 20)
#define SBC_IDE_PIO1_TWP (0x08 << 14)
#define SBC_IDE_PIO1_TCSW (0x03 << 10)
#define SBC_IDE_PIO1_TPM (0x00 << 6)
#define SBC_IDE_PIO1_TA (0x0B << 0)
/* Timing parameters PIO mode 2 */
#define SBC_IDE_PIO2_TCSOE (0x05 << 29)
#define SBC_IDE_PIO2_TOECS (0x01 << 26)
#define SBC_IDE_PIO2_TWCS (0x01 << 28)
#define SBC_IDE_PIO2_TCSH (0x07 << 24)
#define SBC_IDE_PIO2_TCSOFF (0x07 << 20)
#define SBC_IDE_PIO2_TWP (0x1F << 14)
#define SBC_IDE_PIO2_TCSW (0x05 << 10)
#define SBC_IDE_PIO2_TPM (0x00 << 6)
#define SBC_IDE_PIO2_TA (0x22 << 0)
/* Timing parameters PIO mode 3 */
#define SBC_IDE_PIO3_TCSOE (0x05 << 29)
#define SBC_IDE_PIO3_TOECS (0x01 << 26)
#define SBC_IDE_PIO3_TWCS (0x01 << 28)
#define SBC_IDE_PIO3_TCSH (0x0D << 24)
#define SBC_IDE_PIO3_TCSOFF (0x0D << 20)
#define SBC_IDE_PIO3_TWP (0x15 << 14)
#define SBC_IDE_PIO3_TCSW (0x05 << 10)
#define SBC_IDE_PIO3_TPM (0x00 << 6)
#define SBC_IDE_PIO3_TA (0x1A << 0)
/* Timing parameters PIO mode 4 */
#define SBC_IDE_PIO4_TCSOE (0x04 << 29)
#define SBC_IDE_PIO4_TOECS (0x01 << 26)
#define SBC_IDE_PIO4_TWCS (0x01 << 28)
#define SBC_IDE_PIO4_TCSH (0x04 << 24)
#define SBC_IDE_PIO4_TCSOFF (0x04 << 20)
#define SBC_IDE_PIO4_TWP (0x0D << 14)
#define SBC_IDE_PIO4_TCSW (0x03 << 10)
#define SBC_IDE_PIO4_TPM (0x00 << 6)
#define SBC_IDE_PIO4_TA (0x12 << 0)
/* Timing parameters MDMA mode 0 */
#define SBC_IDE_MDMA0_TCSOE (0x03 << 29)
#define SBC_IDE_MDMA0_TOECS (0x01 << 26)
#define SBC_IDE_MDMA0_TWCS (0x01 << 28)
#define SBC_IDE_MDMA0_TCSH (0x07 << 24)
#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20)
#define SBC_IDE_MDMA0_TWP (0x0C << 14)
#define SBC_IDE_MDMA0_TCSW (0x03 << 10)
#define SBC_IDE_MDMA0_TPM (0x00 << 6)
#define SBC_IDE_MDMA0_TA (0x0F << 0)
/* Timing parameters MDMA mode 1 */
#define SBC_IDE_MDMA1_TCSOE (0x05 << 29)
#define SBC_IDE_MDMA1_TOECS (0x01 << 26)
#define SBC_IDE_MDMA1_TWCS (0x01 << 28)
#define SBC_IDE_MDMA1_TCSH (0x05 << 24)
#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20)
#define SBC_IDE_MDMA1_TWP (0x0F << 14)
#define SBC_IDE_MDMA1_TCSW (0x05 << 10)
#define SBC_IDE_MDMA1_TPM (0x00 << 6)
#define SBC_IDE_MDMA1_TA (0x15 << 0)
/* Timing parameters MDMA mode 2 */
#define SBC_IDE_MDMA2_TCSOE (0x04 << 29)
#define SBC_IDE_MDMA2_TOECS (0x01 << 26)
#define SBC_IDE_MDMA2_TWCS (0x01 << 28)
#define SBC_IDE_MDMA2_TCSH (0x04 << 24)
#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20)
#define SBC_IDE_MDMA2_TWP (0x0D << 14)
#define SBC_IDE_MDMA2_TCSW (0x04 << 10)
#define SBC_IDE_MDMA2_TPM (0x00 << 6)
#define SBC_IDE_MDMA2_TA (0x12 << 0)
#define SBC_IDE_TIMING(mode) \
(SBC_IDE_##mode##_TWCS | \
SBC_IDE_##mode##_TCSH | \
SBC_IDE_##mode##_TCSOFF | \
SBC_IDE_##mode##_TWP | \
SBC_IDE_##mode##_TCSW | \
SBC_IDE_##mode##_TPM | \
SBC_IDE_##mode##_TA)

View File

@ -10,6 +10,6 @@
#define NR_IRQS 256
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __ASM_MACH_EMMA2RH_IRQ_H */

View File

@ -12,7 +12,7 @@
#define NR_IRQS 256
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#define IP27_HUB_PEND0_IRQ (MIPS_CPU_IRQ_BASE + 2)
#define IP27_HUB_PEND1_IRQ (MIPS_CPU_IRQ_BASE + 3)

View File

@ -76,7 +76,7 @@ extern void __init ip30_install_ipi(void);
*/
#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2)
#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3)

View File

@ -11,6 +11,6 @@
#define NR_IRQS 328
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif

View File

@ -11,6 +11,6 @@
#define NR_IRQS 256
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif

View File

@ -9,6 +9,6 @@
#define NR_IRQS 24
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* _ASM_MACH_LASAT_IRQ_H */

View File

@ -2,6 +2,8 @@
#ifndef __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
#define __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
#include <linux/types.h>
#define SYSTEM_RAM_LOW 1
#define SYSTEM_RAM_HIGH 2
#define SYSTEM_RAM_RESERVED 3

View File

@ -0,0 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2019 Jiaxun Yang <jiaxun.yang@flygoat.com>
*
* Built-in Generic dtbs for MACH_LOONGSON64
*/
#ifndef __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
#define __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
extern u32 __dtb_loongson3_4core_rs780e_begin[];
extern u32 __dtb_loongson3_8core_rs780e_begin[];
#endif

View File

@ -7,34 +7,6 @@
/* cpu core interrupt numbers */
#define MIPS_CPU_IRQ_BASE 56
#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
#define LOONGSON_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 3) /* CASCADE */
#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
#include <asm/mach-generic/irq.h>
#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
#define LOONGSON_HT1_INT_VECTOR_BASE (LOONGSON_HT1_CFG_BASE + 0x80)
#define LOONGSON_HT1_INT_EN_BASE (LOONGSON_HT1_CFG_BASE + 0xa0)
#define LOONGSON_HT1_INT_VECTOR(n) \
LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * (n))
#define LOONGSON_HT1_INTN_EN(n) \
LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * (n))
#define LOONGSON_INT_ROUTER_OFFSET 0x1400
#define LOONGSON_INT_ROUTER_INTEN \
LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
#define LOONGSON_INT_ROUTER_INTENSET \
LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
#define LOONGSON_INT_ROUTER_INTENCLR \
LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
#define LOONGSON_INT_ROUTER_ENTRY(n) \
LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
#define LOONGSON_INT_ROUTER_LPC LOONGSON_INT_ROUTER_ENTRY(0x0a)
#define LOONGSON_INT_ROUTER_HT1(n) LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
#define LOONGSON_INT_COREx_INTy(x, y) (1<<(x) | 1<<(y+4)) /* route to int y of core x */
extern void fixup_irqs(void);
extern void loongson3_ipi_interrupt(struct pt_regs *regs);
#include_next <irq.h>
#endif /* __ASM_MACH_LOONGSON64_IRQ_H_ */

View File

@ -25,6 +25,7 @@ extern const struct plat_smp_ops loongson3_smp_ops;
/* loongson-specific command line, env and memory initialization */
extern void __init prom_init_memory(void);
extern void __init prom_init_env(void);
extern void *loongson_fdt_blob;
/* irq operation functions */
extern void mach_irq_dispatch(unsigned int pending);

View File

@ -5,6 +5,6 @@
#define NR_IRQS 256
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __ASM_MACH_MIPS_IRQ_H */

View File

@ -9,6 +9,6 @@
#define NR_IRQS 256
#define MIPS_CPU_IRQ_BASE 0
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __ASM_MACH_PIC32_IRQ_H */

View File

@ -10,6 +10,6 @@
#define NR_IRQS 256
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __ASM_MACH_PISTACHIO_IRQ_H */

View File

@ -5,6 +5,6 @@
#define GIC_NUM_INTRS 64
#define NR_IRQS 256
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif

View File

@ -16,6 +16,6 @@
#define mc146818_decode_year(year) ((year) + 1980)
#endif
#include_next <mc146818rtc.h>
#include <asm/mach-generic/mc146818rtc.h>
#endif /* __ASM_MACH_RM_MC146818RTC_H */

View File

@ -4,6 +4,6 @@
#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __ASM_MACH_VR41XX_IRQ_H */

View File

@ -9,6 +9,6 @@
#define NR_IRQS 32
#include_next <irq.h>
#include <asm/mach-generic/irq.h>
#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */

View File

@ -254,13 +254,13 @@ struct thread_struct {
#ifdef CONFIG_MIPS_FP_SUPPORT
/* Saved fpu/fpu emulator stuff. */
struct mips_fpu_struct fpu FPU_ALIGN;
#endif
/* Assigned branch delay slot 'emulation' frame */
atomic_t bd_emu_frame;
/* PC of the branch from a branch delay slot 'emulation' */
unsigned long bd_emu_branch_pc;
/* PC to continue from following a branch delay slot 'emulation' */
unsigned long bd_emu_cont_pc;
#endif
#ifdef CONFIG_MIPS_MT_FPAFF
/* Emulated instruction count */
unsigned long emulated_fp;
@ -303,7 +303,11 @@ struct thread_struct {
.fpr = {{{0,},},}, \
.fcr31 = 0, \
.msacsr = 0, \
},
}, \
/* Delay slot emulation */ \
.bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE), \
.bd_emu_branch_pc = 0, \
.bd_emu_cont_pc = 0,
#else
# define FPU_INIT
#endif
@ -335,10 +339,6 @@ struct thread_struct {
* FPU affinity state (null if not FPAFF) \
*/ \
FPAFF_INIT \
/* Delay slot emulation */ \
.bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE), \
.bd_emu_branch_pc = 0, \
.bd_emu_cont_pc = 0, \
/* \
* Saved DSP stuff \
*/ \

View File

@ -11,6 +11,8 @@
#ifndef __ASM_SNI_H
#define __ASM_SNI_H
#include <linux/irqreturn.h>
extern unsigned int sni_brd_type;
#define SNI_BRD_10 2
@ -239,6 +241,6 @@ static inline int sni_eisa_root_init(void)
/* common irq stuff */
extern void (*sni_hwint)(void);
extern struct irqaction sni_isa_irq;
extern irqreturn_t sni_isa_irq_handler(int dummy, void *p);
#endif /* __ASM_SNI_H */

View File

@ -125,24 +125,18 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction r4030_timer_irqaction = {
.handler = r4030_timer_interrupt,
.flags = IRQF_TIMER,
.name = "R4030 timer",
};
void __init plat_time_init(void)
{
struct clock_event_device *cd = &r4030_clockevent;
struct irqaction *action = &r4030_timer_irqaction;
unsigned int cpu = smp_processor_id();
BUG_ON(HZ != 100);
cd->cpumask = cpumask_of(cpu);
clockevents_register_device(cd);
action->dev_id = cd;
setup_irq(JAZZ_TIMER_IRQ, action);
if (request_irq(JAZZ_TIMER_IRQ, r4030_timer_interrupt, IRQF_TIMER,
"R4030 timer", cd))
pr_err("Failed to register R4030 timer interrupt\n");
/*
* Set clock to 100Hz.

View File

@ -4,8 +4,8 @@
* JZ4740 platform time support
*/
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/of_clk.h>
#include <asm/mach-jz4740/timer.h>

View File

@ -91,16 +91,15 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void sb1480_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
@ -133,11 +132,7 @@ void sb1480_clockevent_init(void)
bcm1480_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_PERCPU | IRQF_TIMER;
action->name = name;
action->dev_id = cd;
irq_set_affinity(irq, cpumask_of(cpu));
setup_irq(irq, action);
if (request_irq(irq, sibyte_counter_handler, flags, name, cd))
pr_err("Failed to request irq %d (%s)\n", irq, name);
}

View File

@ -100,14 +100,9 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ds1287_irqaction = {
.handler = ds1287_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "ds1287",
};
int __init ds1287_clockevent_init(int irq)
{
unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
struct clock_event_device *cd;
cd = &ds1287_clockevent;
@ -122,5 +117,5 @@ int __init ds1287_clockevent_init(int irq)
clockevents_register_device(&ds1287_clockevent);
return setup_irq(irq, &ds1287_irqaction);
return request_irq(irq, ds1287_interrupt, flags, "ds1287", NULL);
}

View File

@ -120,12 +120,6 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction gt641xx_timer0_irqaction = {
.handler = gt641xx_timer0_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "gt641xx_timer0",
};
static int __init gt641xx_timer0_clockevent_init(void)
{
struct clock_event_device *cd;
@ -146,6 +140,7 @@ static int __init gt641xx_timer0_clockevent_init(void)
clockevents_register_device(&gt641xx_timer0_clockevent);
return setup_irq(GT641XX_TIMER0_IRQ, &gt641xx_timer0_irqaction);
return request_irq(GT641XX_TIMER0_IRQ, gt641xx_timer0_interrupt,
IRQF_PERCPU | IRQF_TIMER, "gt641xx_timer0", NULL);
}
arch_initcall(gt641xx_timer0_clockevent_init);

View File

@ -252,6 +252,7 @@ unsigned int __weak get_c0_compare_int(void)
int r4k_clockevent_init(void)
{
unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
unsigned int irq, min_delta;
@ -291,7 +292,9 @@ int r4k_clockevent_init(void)
cp0_timer_irq_installed = 1;
setup_irq(irq, &c0_compare_irqaction);
if (request_irq(irq, c0_compare_interrupt, flags, "timer",
c0_compare_interrupt))
pr_err("Failed to request irq %d (timer)\n", irq);
return 0;
}

View File

@ -90,16 +90,15 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void sb1250_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
/* Only have 4 general purpose timers, and we use last one as hpt */
BUG_ON(cpu > 2);
@ -133,11 +132,7 @@ void sb1250_clockevent_init(void)
sb1250_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_PERCPU | IRQF_TIMER;
action->name = name;
action->dev_id = cd;
irq_set_affinity(irq, cpumask_of(cpu));
setup_irq(irq, action);
if (request_irq(irq, sibyte_counter_handler, flags, name, cd))
pr_err("Failed to request irq %d (%s)\n", irq, name);
}

View File

@ -174,13 +174,6 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction txx9tmr_irq = {
.handler = txx9tmr_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "txx9tmr",
.dev_id = &txx9_clock_event_device,
};
void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
unsigned int imbusclk)
{
@ -202,7 +195,9 @@ void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
cd->irq = irq;
cd->cpumask = cpumask_of(0),
clockevents_register_device(cd);
setup_irq(irq, &txx9tmr_irq);
if (request_irq(irq, txx9tmr_interrupt, IRQF_PERCPU | IRQF_TIMER,
"txx9tmr", &txx9_clock_event_device))
pr_err("Failed to request irq %d (txx9tmr)\n", irq);
printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n",
baseaddr, irq);
}

View File

@ -513,6 +513,13 @@ static inline void set_elf_platform(int cpu, const char *plat)
__elf_platform = plat;
}
static inline void set_elf_base_platform(const char *plat)
{
if (__elf_base_platform == NULL) {
__elf_base_platform = plat;
}
}
static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
{
#ifdef __NEED_VMBITS_PROBE
@ -527,36 +534,46 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
switch (isa) {
case MIPS_CPU_ISA_M64R2:
c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2;
set_elf_base_platform("mips64r2");
/* fall through */
case MIPS_CPU_ISA_M64R1:
c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1;
set_elf_base_platform("mips64");
/* fall through */
case MIPS_CPU_ISA_V:
c->isa_level |= MIPS_CPU_ISA_V;
set_elf_base_platform("mips5");
/* fall through */
case MIPS_CPU_ISA_IV:
c->isa_level |= MIPS_CPU_ISA_IV;
set_elf_base_platform("mips4");
/* fall through */
case MIPS_CPU_ISA_III:
c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III;
set_elf_base_platform("mips3");
break;
/* R6 incompatible with everything else */
case MIPS_CPU_ISA_M64R6:
c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6;
set_elf_base_platform("mips64r6");
/* fall through */
case MIPS_CPU_ISA_M32R6:
c->isa_level |= MIPS_CPU_ISA_M32R6;
set_elf_base_platform("mips32r6");
/* Break here so we don't add incompatible ISAs */
break;
case MIPS_CPU_ISA_M32R2:
c->isa_level |= MIPS_CPU_ISA_M32R2;
set_elf_base_platform("mips32r2");
/* fall through */
case MIPS_CPU_ISA_M32R1:
c->isa_level |= MIPS_CPU_ISA_M32R1;
set_elf_base_platform("mips32");
/* fall through */
case MIPS_CPU_ISA_II:
c->isa_level |= MIPS_CPU_ISA_II;
set_elf_base_platform("mips2");
break;
}
}
@ -2113,6 +2130,7 @@ EXPORT_SYMBOL(__ua_limit);
const char *__cpu_name[NR_CPUS];
const char *__elf_platform;
const char *__elf_base_platform;
void cpu_probe(void)
{

View File

@ -18,16 +18,13 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_NOBALANCING | IRQF_TIMER,
.name = "timer"
};
void __init setup_pit_timer(void)
{
unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER;
clockevent_i8253_init(true);
setup_irq(0, &irq0);
if (request_irq(0, timer_interrupt, flags, "timer", NULL))
pr_err("Failed to request irq 0 (timer)\n");
}
static int __init init_pit_clocksource(void)

View File

@ -75,7 +75,9 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
lose_fpu(0);
clear_thread_flag(TIF_MSA_CTX_LIVE);
clear_used_math();
#ifdef CONFIG_MIPS_FP_SUPPORT
atomic_set(&current->thread.bd_emu_frame, BD_EMUFRAME_NONE);
#endif
init_dsp();
regs->cp0_epc = pc;
regs->regs[29] = sp;
@ -176,7 +178,9 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
clear_tsk_thread_flag(p, TIF_FPUBOUND);
#endif /* CONFIG_MIPS_MT_FPAFF */
#ifdef CONFIG_MIPS_FP_SUPPORT
atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE);
#endif
if (clone_flags & CLONE_SETTLS)
ti->tp_value = tls;
@ -650,8 +654,10 @@ unsigned long mips_stack_top(void)
{
unsigned long top = TASK_SIZE & PAGE_MASK;
/* One page for branch delay slot "emulation" */
top -= PAGE_SIZE;
if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
/* One page for branch delay slot "emulation" */
top -= PAGE_SIZE;
}
/* Space for the VDSO, data page & GIC user page */
top -= PAGE_ALIGN(current->thread.abi->vdso->size);

View File

@ -51,11 +51,6 @@ static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction rtlx_irq = {
.handler = rtlx_interrupt,
.name = "RTLX",
};
static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
void _interrupt_sp(void)
@ -124,8 +119,7 @@ int __init rtlx_module_init(void)
goto out_class;
}
rtlx_irq.dev_id = rtlx;
err = setup_irq(rtlx_irq_num, &rtlx_irq);
err = request_irq(rtlx_irq_num, rtlx_interrupt, 0, "RTLX", rtlx);
if (err)
goto out_class;

View File

@ -28,6 +28,7 @@
#include <linux/decompress/generic.h>
#include <linux/of_fdt.h>
#include <linux/of_reserved_mem.h>
#include <linux/dmi.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
@ -799,6 +800,7 @@ void __init setup_arch(char **cmdline_p)
#endif
arch_mem_init(cmdline_p);
dmi_setup();
resource_init();
plat_smp_setup();

View File

@ -207,25 +207,13 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq_resched = {
.handler = ipi_resched_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI resched"
};
static struct irqaction irq_call = {
.handler = ipi_call_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI call"
};
static void smp_ipi_init_one(unsigned int virq,
struct irqaction *action)
static void smp_ipi_init_one(unsigned int virq, const char *name,
irq_handler_t handler)
{
int ret;
irq_set_handler(virq, handle_percpu_irq);
ret = setup_irq(virq, action);
ret = request_irq(virq, handler, IRQF_PERCPU, name, NULL);
BUG_ON(ret);
}
@ -278,12 +266,15 @@ int mips_smp_ipi_allocate(const struct cpumask *mask)
int cpu;
for_each_cpu(cpu, mask) {
smp_ipi_init_one(call_virq + cpu, &irq_call);
smp_ipi_init_one(sched_virq + cpu, &irq_resched);
smp_ipi_init_one(call_virq + cpu, "IPI call",
ipi_call_interrupt);
smp_ipi_init_one(sched_virq + cpu, "IPI resched",
ipi_resched_interrupt);
}
} else {
smp_ipi_init_one(call_virq, &irq_call);
smp_ipi_init_one(sched_virq, &irq_resched);
smp_ipi_init_one(call_virq, "IPI call", ipi_call_interrupt);
smp_ipi_init_one(sched_virq, "IPI resched",
ipi_resched_interrupt);
}
return 0;
@ -311,8 +302,8 @@ int mips_smp_ipi_free(const struct cpumask *mask)
int cpu;
for_each_cpu(cpu, mask) {
remove_irq(call_virq + cpu, &irq_call);
remove_irq(sched_virq + cpu, &irq_resched);
free_irq(call_virq + cpu, NULL);
free_irq(sched_virq + cpu, NULL);
}
}
irq_destroy_ipi(call_virq, mask);

View File

@ -71,10 +71,12 @@ subsys_initcall(init_vdso);
static unsigned long vdso_base(void)
{
unsigned long base;
unsigned long base = STACK_TOP;
/* Skip the delay slot emulation page */
base = STACK_TOP + PAGE_SIZE;
if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
/* Skip the delay slot emulation page */
base += PAGE_SIZE;
}
if (current->flags & PF_RANDOMIZE) {
base += get_random_int() & (VDSO_RANDOMIZE_SIZE - 1);
@ -95,14 +97,16 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
if (down_write_killable(&mm->mmap_sem))
return -EINTR;
/* Map delay slot emulation page */
base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
VM_READ | VM_EXEC |
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
0, NULL);
if (IS_ERR_VALUE(base)) {
ret = base;
goto out;
if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
/* Map delay slot emulation page */
base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
VM_READ | VM_EXEC |
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
0, NULL);
if (IS_ERR_VALUE(base)) {
ret = base;
goto out;
}
}
/*

View File

@ -90,14 +90,9 @@ asmlinkage void plat_irq_dispatch(void)
}
}
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
{
int irq = LASAT_CASCADE_IRQ;
int i;
if (IS_LASAT_200()) {
@ -119,5 +114,6 @@ void __init arch_init_irq(void)
for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
setup_irq(LASAT_CASCADE_IRQ, &cascade);
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
}

View File

@ -24,6 +24,8 @@
#define GCC_DADDI_IMM_ASM() "r"
#endif
#ifndef CONFIG_HAVE_PLAT_DELAY
void __delay(unsigned long loops)
{
__asm__ __volatile__ (
@ -63,3 +65,5 @@ void __ndelay(unsigned long ns)
__delay((ns * 0x00000005ull * HZ * lpj) >> 32);
}
EXPORT_SYMBOL(__ndelay);
#endif

View File

@ -598,6 +598,7 @@ SEXC(1)
nop
.endm
#ifndef CONFIG_HAVE_PLAT_MEMCPY
.align 5
LEAF(memmove)
EXPORT_SYMBOL(memmove)
@ -665,6 +666,8 @@ EXPORT_SYMBOL(__copy_user)
/* Legacy Mode, user <-> user */
__BUILD_COPY_USER LEGACY_MODE USEROP USEROP
#endif
#ifdef CONFIG_EVA
/*

View File

@ -30,11 +30,6 @@ static struct irq_chip bonito_irq_type = {
.irq_unmask = bonito_irq_enable,
};
static struct irqaction __maybe_unused dma_timeout_irqaction = {
.handler = no_action,
.name = "dma_timeout",
};
void bonito_irq_init(void)
{
u32 i;
@ -44,6 +39,8 @@ void bonito_irq_init(void)
handle_level_irq);
#ifdef CONFIG_CPU_LOONGSON2E
setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
i = LOONGSON_IRQ_BASE + 10;
if (request_irq(i, no_action, 0, "dma_timeout", NULL))
pr_err("Failed to request irq %d (dma_timeout)\n", i);
#endif
}

View File

@ -100,12 +100,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq5 = {
.handler = timer_interrupt,
.flags = IRQF_NOBALANCING | IRQF_TIMER,
.name = "timer"
};
/*
* Initialize the conversion factor and the min/max deltas of the clock event
* structure and register the clock event source with the framework.
@ -134,7 +128,9 @@ void __init setup_mfgpt0_timer(void)
clockevents_register_device(cd);
setup_irq(CS5536_MFGPT_INTR, &irq5);
if (request_irq(CS5536_MFGPT_INTR, timer_interrupt,
IRQF_NOBALANCING | IRQF_TIMER, "timer", NULL))
pr_err("Failed to register timer interrupt\n");
}
/*

View File

@ -35,14 +35,10 @@ asmlinkage void mach_irq_dispatch(unsigned int pending)
spurious_interrupt();
}
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
void __init mach_init_irq(void)
{
int irq;
/* init all controller
* 0-15 ------> i8259 interrupt
* 16-23 ------> mips cpu interrupt
@ -59,7 +55,11 @@ void __init mach_init_irq(void)
bonito_irq_init();
/* bonito irq at IP2 */
setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
irq = MIPS_CPU_IRQ_BASE + 2;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
/* 8259 irq at IP5 */
setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
irq = MIPS_CPU_IRQ_BASE + 5;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
}

View File

@ -90,18 +90,6 @@ static irqreturn_t ip6_action(int cpl, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ip6_irqaction = {
.handler = ip6_action,
.name = "cascade",
.flags = IRQF_SHARED | IRQF_NO_THREAD,
};
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND,
};
void __init mach_init_irq(void)
{
/* init all controller
@ -120,7 +108,11 @@ void __init mach_init_irq(void)
bonito_irq_init();
/* setup north bridge irq (bonito) */
setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
IRQF_SHARED | IRQF_NO_THREAD, "cascade", ip6_action))
pr_err("Failed to register north bridge cascade interrupt\n");
/* setup source bridge irq (i8259) */
setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
IRQF_NO_THREAD | IRQF_NO_SUSPEND, "cascade", NULL))
pr_err("Failed to register south bridge cascade interrupt\n");
}

View File

@ -149,12 +149,6 @@ asmlinkage void plat_irq_dispatch(void)
}
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
static void __init ls1x_irq_init(int base)
{
int n;
@ -176,12 +170,17 @@ static void __init ls1x_irq_init(int base)
handle_level_irq);
}
setup_irq(INT0_IRQ, &cascade_irqaction);
setup_irq(INT1_IRQ, &cascade_irqaction);
setup_irq(INT2_IRQ, &cascade_irqaction);
setup_irq(INT3_IRQ, &cascade_irqaction);
if (request_irq(INT0_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT0_IRQ);
if (request_irq(INT1_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT1_IRQ);
if (request_irq(INT2_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT2_IRQ);
if (request_irq(INT3_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT3_IRQ);
#if defined(CONFIG_LOONGSON1_LS1C)
setup_irq(INT4_IRQ, &cascade_irqaction);
if (request_irq(INT4_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT4_IRQ);
#endif
}

View File

@ -176,13 +176,6 @@ static struct clock_event_device ls1x_clockevent = {
.tick_resume = ls1x_clockevent_tick_resume,
};
static struct irqaction ls1x_pwmtimer_irqaction = {
.name = "ls1x-pwmtimer",
.handler = ls1x_clockevent_isr,
.dev_id = &ls1x_clockevent,
.flags = IRQF_PERCPU | IRQF_TIMER,
};
static void __init ls1x_time_init(void)
{
struct clock_event_device *cd = &ls1x_clockevent;
@ -206,7 +199,10 @@ static void __init ls1x_time_init(void)
if (ret)
panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
&ls1x_clockevent))
pr_err("Failed to register ls1x-pwmtimer interrupt\n");
}
#endif /* CONFIG_CEVT_CSRC_LS1X */

View File

@ -2,7 +2,7 @@
#
# Makefile for Loongson-3 family machines
#
obj-$(CONFIG_MACH_LOONGSON64) += irq.o cop2-ex.o platform.o acpi_init.o dma.o \
obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o acpi_init.o dma.o \
setup.o init.o env.o time.o reset.o \
obj-$(CONFIG_SMP) += smp.o

View File

@ -17,6 +17,7 @@
#include <asm/bootinfo.h>
#include <loongson.h>
#include <boot_param.h>
#include <builtin_dtbs.h>
#include <workarounds.h>
u32 cpu_clock_freq;
@ -120,6 +121,28 @@ void __init prom_init_env(void)
loongson_sysconf.cores_per_node - 1) /
loongson_sysconf.cores_per_node;
if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C) {
switch (read_c0_prid() & PRID_REV_MASK) {
case PRID_REV_LOONGSON3A_R1:
case PRID_REV_LOONGSON3A_R2_0:
case PRID_REV_LOONGSON3A_R2_1:
case PRID_REV_LOONGSON3A_R3_0:
case PRID_REV_LOONGSON3A_R3_1:
loongson_fdt_blob = __dtb_loongson3_4core_rs780e_begin;
break;
case PRID_REV_LOONGSON3B_R1:
case PRID_REV_LOONGSON3B_R2:
loongson_fdt_blob = __dtb_loongson3_8core_rs780e_begin;
break;
default:
break;
}
}
if (!loongson_fdt_blob)
pr_err("Failed to determine built-in Loongson64 dtb\n");
loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;

View File

@ -187,12 +187,6 @@ static irqreturn_t hpet_irq_handler(int irq, void *data)
return IRQ_NONE;
}
static struct irqaction hpet_irq = {
.handler = hpet_irq_handler,
.flags = IRQF_NOBALANCING | IRQF_TIMER,
.name = "hpet",
};
/*
* hpet address assignation and irq setting should be done in bios.
* but pmon don't do this, we just setup here directly.
@ -224,6 +218,7 @@ static void hpet_setup(void)
void __init setup_hpet_timer(void)
{
unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
@ -247,7 +242,8 @@ void __init setup_hpet_timer(void)
cd->min_delta_ticks = HPET_MIN_PROG_DELTA;
clockevents_register_device(cd);
setup_irq(HPET_T0_IRQ, &hpet_irq);
if (request_irq(HPET_T0_IRQ, hpet_irq_handler, flags, "hpet", NULL))
pr_err("Failed to request irq %d (hpet)\n", HPET_T0_IRQ);
pr_info("hpet clock event device register\n");
}

View File

@ -4,6 +4,7 @@
* Author: Wu Zhangjin, wuzhangjin@gmail.com
*/
#include <linux/irqchip.h>
#include <linux/memblock.h>
#include <asm/bootinfo.h>
#include <asm/traps.h>
@ -44,3 +45,8 @@ void __init prom_init(void)
void __init prom_free_prom_memory(void)
{
}
void __init arch_init_irq(void)
{
irqchip_init();
}

View File

@ -1,162 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
#include <loongson.h>
#include <irq.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <asm/irq_cpu.h>
#include <asm/i8259.h>
#include <asm/mipsregs.h>
#include "smp.h"
extern void loongson3_send_irq_by_ipi(int cpu, int irqs);
unsigned int irq_cpu[16] = {[0 ... 15] = -1};
unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
unsigned int local_irq = 1<<0 | 1<<1 | 1<<2 | 1<<7 | 1<<8 | 1<<12;
int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
unsigned int cpu;
struct cpumask new_affinity;
/* I/O devices are connected on package-0 */
cpumask_copy(&new_affinity, affinity);
for_each_cpu(cpu, affinity)
if (cpu_data[cpu].package > 0)
cpumask_clear_cpu(cpu, &new_affinity);
if (cpumask_empty(&new_affinity))
return -EINVAL;
cpumask_copy(d->common->affinity, &new_affinity);
return IRQ_SET_MASK_OK_NOCOPY;
}
static void ht_irqdispatch(void)
{
unsigned int i, irq;
struct irq_data *irqd;
struct cpumask affinity;
irq = LOONGSON_HT1_INT_VECTOR(0);
LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
for (i = 0; i < ARRAY_SIZE(ht_irq); i++) {
if (!(irq & (0x1 << ht_irq[i])))
continue;
/* handled by local core */
if (local_irq & (0x1 << ht_irq[i])) {
do_IRQ(ht_irq[i]);
continue;
}
irqd = irq_get_irq_data(ht_irq[i]);
cpumask_and(&affinity, irqd->common->affinity, cpu_active_mask);
if (cpumask_empty(&affinity)) {
do_IRQ(ht_irq[i]);
continue;
}
irq_cpu[ht_irq[i]] = cpumask_next(irq_cpu[ht_irq[i]], &affinity);
if (irq_cpu[ht_irq[i]] >= nr_cpu_ids)
irq_cpu[ht_irq[i]] = cpumask_first(&affinity);
if (irq_cpu[ht_irq[i]] == 0) {
do_IRQ(ht_irq[i]);
continue;
}
/* balanced by other cores */
loongson3_send_irq_by_ipi(irq_cpu[ht_irq[i]], (0x1 << ht_irq[i]));
}
}
#define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0)
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending;
pending = read_c0_cause() & read_c0_status() & ST0_IM;
if (pending & CAUSEF_IP7)
do_IRQ(LOONGSON_TIMER_IRQ);
#if defined(CONFIG_SMP)
if (pending & CAUSEF_IP6)
loongson3_ipi_interrupt(NULL);
#endif
if (pending & CAUSEF_IP3)
ht_irqdispatch();
if (pending & CAUSEF_IP2)
do_IRQ(LOONGSON_UART_IRQ);
if (pending & UNUSED_IPS) {
pr_err("%s : spurious interrupt\n", __func__);
spurious_interrupt();
}
}
static inline void mask_loongson_irq(struct irq_data *d) { }
static inline void unmask_loongson_irq(struct irq_data *d) { }
/* For MIPS IRQs which shared by all cores */
static struct irq_chip loongson_irq_chip = {
.name = "Loongson",
.irq_ack = mask_loongson_irq,
.irq_mask = mask_loongson_irq,
.irq_mask_ack = mask_loongson_irq,
.irq_unmask = unmask_loongson_irq,
.irq_eoi = unmask_loongson_irq,
};
void irq_router_init(void)
{
int i;
/* route LPC int to cpu core0 int 0 */
LOONGSON_INT_ROUTER_LPC =
LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0);
/* route HT1 int0 ~ int7 to cpu core0 INT1*/
for (i = 0; i < 8; i++)
LOONGSON_INT_ROUTER_HT1(i) =
LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1);
/* enable HT1 interrupt */
LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
/* enable router interrupt intenset */
LOONGSON_INT_ROUTER_INTENSET =
LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
}
void __init arch_init_irq(void)
{
struct irq_chip *chip;
clear_c0_status(ST0_IM | ST0_BEV);
irq_router_init();
mips_cpu_irq_init();
init_i8259_irqs();
chip = irq_get_chip(I8259A_IRQ_BASE);
chip->irq_set_affinity = plat_set_irq_affinity;
irq_set_chip_and_handler(LOONGSON_UART_IRQ,
&loongson_irq_chip, handle_percpu_irq);
irq_set_chip_and_handler(LOONGSON_BRIDGE_IRQ,
&loongson_irq_chip, handle_percpu_irq);
set_c0_status(STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP6);
}
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(void)
{
irq_cpu_offline();
clear_c0_status(ST0_IM);
}
#endif

View File

@ -122,7 +122,7 @@ static unsigned long nid_to_addroffset(unsigned int nid)
static void __init szmem(unsigned int node)
{
u32 i, mem_type;
static unsigned long num_physpages = 0;
static unsigned long num_physpages;
u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
/* Parse memory information and activate */

Some files were not shown because too many files have changed in this diff Show More