mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-02 15:18:19 +00:00
Code Issues Releases Wiki Activity

Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6

Browse source
This commit is contained in:
Linus Torvalds 2005-11-11 14:04:37 -08:00
commit d72d6f1b56
143 changed files with 1735 additions and 5104 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

29
Documentation/cciss.txt
View file

@ -133,3 +133,32 @@ hardware and it is important to prevent the kernel from attempting to directly
access these devices too, as if the array controller were merely a SCSI
controller in the same way that we are allowing it to access SCSI tape drives.
SCSI error handling for tape drives and medium changers
-------------------------------------------------------
The linux SCSI mid layer provides an error handling protocol which
kicks into gear whenever a SCSI command fails to complete within a
certain amount of time (which can vary depending on the command).
The cciss driver participates in this protocol to some extent. The
normal protocol is a four step process. First the device is told
to abort the command. If that doesn't work, the device is reset.
If that doesn't work, the SCSI bus is reset. If that doesn't work
the host bus adapter is reset. Because the cciss driver is a block
driver as well as a SCSI driver and only the tape drives and medium
changers are presented to the SCSI mid layer, and unlike more
straightforward SCSI drivers, disk i/o continues through the block
side during the SCSI error recovery process, the cciss driver only
implements the first two of these actions, aborting the command, and
resetting the device. Additionally, most tape drives will not oblige
in aborting commands, and sometimes it appears they will not even
obey a reset coommand, though in most circumstances they will. In
the case that the command cannot be aborted and the device cannot be
reset, the device will be set offline.
In the event the error handling code is triggered and a tape drive is
successfully reset or the tardy command is successfully aborted, the
tape drive may still not allow i/o to continue until some command
is issued which positions the tape to a known position. Typically you
must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example)
before i/o can proceed again to a tape drive which was reset.

2
Documentation/scsi/00-INDEX
View file

@ -52,8 +52,6 @@ ppa.txt
- info on driver for IOmega zip drive
qlogicfas.txt
- info on driver for QLogic FASxxx based adapters
qlogicisp.txt
- info on driver for QLogic ISP 1020 based adapters
scsi-generic.txt
- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
scsi.txt

3
Documentation/scsi/qlogicfas.txt
View file

@ -11,8 +11,7 @@ Qlogic boards:
* IQ-PCI-10
* IQ-PCI-D
is provided by the qlogicisp.c driver. Check README.qlogicisp for
details.
is provided by the qla1280 driver.
Nor does it support the PCI-Basic, which is supported by the
'am53c974' driver.

30
Documentation/scsi/qlogicisp.txt
View file

@ -1,30 +0,0 @@
Notes for the QLogic ISP1020 PCI SCSI Driver:
This driver works well in practice, but does not support disconnect/
reconnect, which makes using it with tape drives impractical.
It should work for most host adaptors with the ISP1020 chip. The
QLogic Corporation produces several PCI SCSI adapters which should
work:
* IQ-PCI
* IQ-PCI-10
* IQ-PCI-D
This driver may work with boards containing the ISP1020A or ISP1040A
chips, but that has not been tested.
This driver will NOT work with:
* ISA or VL Bus Qlogic cards (they use the 'qlogicfas' driver)
* PCI-basic (it uses the 'am53c974' driver)
Much thanks to QLogic's tech support for providing the latest ISP1020
firmware, and for taking the time to review my code.
Erik Moe
ehm@cris.com
Revised:
Michael A. Griffith
grif@cs.ucr.edu

8
Documentation/scsi/scsi_eh.txt
View file

@ -83,11 +83,11 @@ with the command.
The timeout handler is scsi_times_out(). When a timeout occurs, this
function
1. invokes optional hostt->eh_timedout() callback. Return value can
1. invokes optional hostt->eh_timed_out() callback. Return value can
be one of
- EH_HANDLED
This indicates that eh_timedout() dealt with the timeout. The
This indicates that eh_timed_out() dealt with the timeout. The
scmd is passed to __scsi_done() and thus linked into per-cpu
scsi_done_q. Normal command completion described in [1-2-1]
follows.
@ -105,7 +105,7 @@ function
command will time out again.
- EH_NOT_HANDLED
This is the same as when eh_timedout() callback doesn't exist.
This is the same as when eh_timed_out() callback doesn't exist.
Step #2 is taken.
2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
@ -142,7 +142,7 @@ are linked on shost->eh_cmd_q.
Note that this does not mean lower layers are quiescent. If a LLDD
completed a scmd with error status, the LLDD and lower layers are
assumed to forget about the scmd at that point. However, if a scmd
has timed out, unless hostt->eh_timedout() made lower layers forget
has timed out, unless hostt->eh_timed_out() made lower layers forget
about the scmd, which currently no LLDD does, the command is still
active as long as lower layers are concerned and completion could
occur at any time. Of course, all such completions are ignored as the

4
Documentation/scsi/scsi_mid_low_api.txt
View file

@ -346,7 +346,7 @@ Next, there is a movement to "outlaw" typedefs introducing synonyms for
struct tags. Both can be still found in the SCSI subsystem, but
the typedefs have been moved to a single file, scsi_typedefs.h to
make their future removal easier, for example:
"typedef struct scsi_host_template Scsi_Host_Template;"
"typedef struct scsi_cmnd Scsi_Cmnd;"
Also, most C99 enhancements are encouraged to the extent they are supported
by the relevant gcc compilers. So C99 style structure and array
@ -718,7 +718,7 @@ void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
*
* Defined in: drivers/scsi/scsi.c .
**/
int scsi_track_queue_full(Scsi_Device *sdev, int depth)
int scsi_track_queue_full(struct scsi_device *sdev, int depth)
/**

1
drivers/block/acsi.c
View file

@ -58,7 +58,6 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <scsi/scsi.h> /* for SCSI_IOCTL_GET_IDLUN */
typedef void Scsi_Device; /* hack to avoid including scsi.h */
#include <scsi/scsi_ioctl.h>
#include <linux/hdreg.h> /* for HDIO_GETGEO */
#include <linux/blkpg.h>

188
drivers/block/cciss.c
View file

@ -148,6 +148,7 @@ static struct board_type products[] = {
static ctlr_info_t *hba[MAX_CTLR];
static void do_cciss_request(request_queue_t *q);
static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs);
static int cciss_open(struct inode *inode, struct file *filep);
static int cciss_release(struct inode *inode, struct file *filep);
static int cciss_ioctl(struct inode *inode, struct file *filep,
@ -1583,6 +1584,24 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
}
} else if (cmd_type == TYPE_MSG) {
switch (cmd) {
case 0: /* ABORT message */
c->Request.CDBLen = 12;
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_WRITE;
c->Request.Timeout = 0;
c->Request.CDB[0] = cmd; /* abort */
c->Request.CDB[1] = 0; /* abort a command */
/* buff contains the tag of the command to abort */
memcpy(&c->Request.CDB[4], buff, 8);
break;
case 1: /* RESET message */
c->Request.CDBLen = 12;
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_WRITE;
c->Request.Timeout = 0;
memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
c->Request.CDB[0] = cmd; /* reset */
c->Request.CDB[1] = 0x04; /* reset a LUN */
case 3: /* No-Op message */
c->Request.CDBLen = 1;
c->Request.Type.Attribute = ATTR_SIMPLE;
@ -1869,6 +1888,52 @@ static unsigned long pollcomplete(int ctlr)
/* Invalid address to tell caller we ran out of time */
return 1;
}
static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
{
/* We get in here if sendcmd() is polling for completions
and gets some command back that it wasn't expecting --
something other than that which it just sent down.
Ordinarily, that shouldn't happen, but it can happen when
the scsi tape stuff gets into error handling mode, and
starts using sendcmd() to try to abort commands and
reset tape drives. In that case, sendcmd may pick up
completions of commands that were sent to logical drives
through the block i/o system, or cciss ioctls completing, etc.
In that case, we need to save those completions for later
processing by the interrupt handler.
*/
#ifdef CONFIG_CISS_SCSI_TAPE
struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
/* If it's not the scsi tape stuff doing error handling, (abort */
/* or reset) then we don't expect anything weird. */
if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
#endif
printk( KERN_WARNING "cciss cciss%d: SendCmd "
"Invalid command list address returned! (%lx)\n",
ctlr, complete);
/* not much we can do. */
#ifdef CONFIG_CISS_SCSI_TAPE
return 1;
}
/* We've sent down an abort or reset, but something else
has completed */
if (srl->ncompletions >= (NR_CMDS + 2)) {
/* Uh oh. No room to save it for later... */
printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
"reject list overflow, command lost!\n", ctlr);
return 1;
}
/* Save it for later */
srl->complete[srl->ncompletions] = complete;
srl->ncompletions++;
#endif
return 0;
}
/*
* Send a command to the controller, and wait for it to complete.
* Only used at init time.
@ -1891,7 +1956,7 @@ static int sendcmd(
unsigned long complete;
ctlr_info_t *info_p= hba[ctlr];
u64bit buff_dma_handle;
int status;
int status, done = 0;
if ((c = cmd_alloc(info_p, 1)) == NULL) {
printk(KERN_WARNING "cciss: unable to get memory");
@ -1913,7 +1978,9 @@ static int sendcmd(
info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
/* Make sure there is room in the command FIFO */
/* Actually it should be completely empty at this time. */
/* Actually it should be completely empty at this time */
/* unless we are in here doing error handling for the scsi */
/* tape side of the driver. */
for (i = 200000; i > 0; i--)
{
/* if fifo isn't full go */
@ -1930,13 +1997,25 @@ static int sendcmd(
* Send the cmd
*/
info_p->access.submit_command(info_p, c);
complete = pollcomplete(ctlr);
done = 0;
do {
complete = pollcomplete(ctlr);
#ifdef CCISS_DEBUG
printk(KERN_DEBUG "cciss: command completed\n");
printk(KERN_DEBUG "cciss: command completed\n");
#endif /* CCISS_DEBUG */
if (complete != 1) {
if (complete == 1) {
printk( KERN_WARNING
"cciss cciss%d: SendCmd Timeout out, "
"No command list address returned!\n",
ctlr);
status = IO_ERROR;
done = 1;
break;
}
/* This will need to change for direct lookup completions */
if ( (complete & CISS_ERROR_BIT)
&& (complete & ~CISS_ERROR_BIT) == c->busaddr)
{
@ -1976,6 +2055,10 @@ static int sendcmd(
status = IO_ERROR;
goto cleanup1;
}
} else if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
printk(KERN_WARNING "cciss%d: command could not be aborted.\n", ctlr);
status = IO_ERROR;
goto cleanup1;
}
printk(KERN_WARNING "ciss ciss%d: sendcmd"
" Error %x \n", ctlr,
@ -1990,20 +2073,15 @@ static int sendcmd(
goto cleanup1;
}
}
/* This will need changing for direct lookup completions */
if (complete != c->busaddr) {
printk( KERN_WARNING "cciss cciss%d: SendCmd "
"Invalid command list address returned! (%lx)\n",
ctlr, complete);
status = IO_ERROR;
goto cleanup1;
}
} else {
printk( KERN_WARNING
"cciss cciss%d: SendCmd Timeout out, "
"No command list address returned!\n",
ctlr);
status = IO_ERROR;
}
if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
BUG(); /* we are pretty much hosed if we get here. */
}
continue;
} else
done = 1;
} while (!done);
cleanup1:
/* unlock the data buffer from DMA */
@ -2011,6 +2089,11 @@ static int sendcmd(
buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
#ifdef CONFIG_CISS_SCSI_TAPE
/* if we saved some commands for later, process them now. */
if (info_p->scsi_rejects.ncompletions > 0)
do_cciss_intr(0, info_p, NULL);
#endif
cmd_free(info_p, c, 1);
return (status);
}
@ -2335,6 +2418,48 @@ static void do_cciss_request(request_queue_t *q)
start_io(h);
}
static inline unsigned long get_next_completion(ctlr_info_t *h)
{
#ifdef CONFIG_CISS_SCSI_TAPE
/* Any rejects from sendcmd() lying around? Process them first */
if (h->scsi_rejects.ncompletions == 0)
return h->access.command_completed(h);
else {
struct sendcmd_reject_list *srl;
int n;
srl = &h->scsi_rejects;
n = --srl->ncompletions;
/* printk("cciss%d: processing saved reject\n", h->ctlr); */
printk("p");
return srl->complete[n];
}
#else
return h->access.command_completed(h);
#endif
}
static inline int interrupt_pending(ctlr_info_t *h)
{
#ifdef CONFIG_CISS_SCSI_TAPE
return ( h->access.intr_pending(h)
|| (h->scsi_rejects.ncompletions > 0));
#else
return h->access.intr_pending(h);
#endif
}
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
#ifdef CONFIG_CISS_SCSI_TAPE
return (((h->access.intr_pending(h) == 0) ||
(h->interrupts_enabled == 0))
&& (h->scsi_rejects.ncompletions == 0));
#else
return (((h->access.intr_pending(h) == 0) ||
(h->interrupts_enabled == 0)));
#endif
}
static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
{
ctlr_info_t *h = dev_id;
@ -2344,19 +2469,15 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
int j;
int start_queue = h->next_to_run;
/* Is this interrupt for us? */
if (( h->access.intr_pending(h) == 0) || (h->interrupts_enabled == 0))
if (interrupt_not_for_us(h))
return IRQ_NONE;
/*
* If there are completed commands in the completion queue,
* we had better do something about it.
*/
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
while( h->access.intr_pending(h))
{
while((a = h->access.command_completed(h)) != FIFO_EMPTY)
{
while (interrupt_pending(h)) {
while((a = get_next_completion(h)) != FIFO_EMPTY) {
a1 = a;
if ((a & 0x04)) {
a2 = (a >> 3);
@ -2963,7 +3084,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
printk( KERN_ERR "cciss: out of memory");
goto clean4;
}
#ifdef CONFIG_CISS_SCSI_TAPE
hba[i]->scsi_rejects.complete =
kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
(NR_CMDS + 5), GFP_KERNEL);
if (hba[i]->scsi_rejects.complete == NULL) {
printk( KERN_ERR "cciss: out of memory");
goto clean4;
}
#endif
spin_lock_init(&hba[i]->lock);
/* Initialize the pdev driver private data.
@ -3031,6 +3160,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
return(1);
clean4:
#ifdef CONFIG_CISS_SCSI_TAPE
if(hba[i]->scsi_rejects.complete)
kfree(hba[i]->scsi_rejects.complete);
#endif
kfree(hba[i]->cmd_pool_bits);
if(hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
@ -3103,6 +3236,9 @@ static void __devexit cciss_remove_one (struct pci_dev *pdev)
pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
#ifdef CONFIG_CISS_SCSI_TAPE
kfree(hba[i]->scsi_rejects.complete);
#endif
release_io_mem(hba[i]);
free_hba(i);
}

11
drivers/block/cciss.h
View file

@ -44,6 +44,14 @@ typedef struct _drive_info_struct
*/
} drive_info_struct;
#ifdef CONFIG_CISS_SCSI_TAPE
struct sendcmd_reject_list {
int ncompletions;
unsigned long *complete; /* array of NR_CMDS tags */
};
#endif
struct ctlr_info
{
int ctlr;
@ -100,6 +108,9 @@ struct ctlr_info
struct gendisk *gendisk[NWD];
#ifdef CONFIG_CISS_SCSI_TAPE
void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
/* list of block side commands the scsi error handling sucked up */
/* and saved for later processing */
struct sendcmd_reject_list scsi_rejects;
#endif
unsigned char alive;
};

82
drivers/block/cciss_scsi.c
View file

@ -42,6 +42,9 @@
#include "cciss_scsi.h"
#define CCISS_ABORT_MSG 0x00
#define CCISS_RESET_MSG 0x01
/* some prototypes... */
static int sendcmd(
__u8 cmd,
@ -67,6 +70,8 @@ static int cciss_scsi_proc_info(
static int cciss_scsi_queue_command (struct scsi_cmnd *cmd,
void (* done)(struct scsi_cmnd *));
static int cciss_eh_device_reset_handler(struct scsi_cmnd *);
static int cciss_eh_abort_handler(struct scsi_cmnd *);
static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = {
{ .name = "cciss0", .ndevices = 0 },
@ -90,6 +95,9 @@ static struct scsi_host_template cciss_driver_template = {
.sg_tablesize = MAXSGENTRIES,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
/* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */
.eh_device_reset_handler= cciss_eh_device_reset_handler,
.eh_abort_handler = cciss_eh_abort_handler,
};
#pragma pack(1)
@ -247,7 +255,7 @@ scsi_cmd_stack_free(int ctlr)
#define DEVICETYPE(n) (n<0 || n>MAX_SCSI_DEVICE_CODE) ? \
"Unknown" : scsi_device_types[n]
#if 0
#if 1
static int xmargin=8;
static int amargin=60;
@ -1448,6 +1456,78 @@ cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len)
*pos += size; *len += size;
}
/* Need at least one of these error handlers to keep ../scsi/hosts.c from
* complaining. Doing a host- or bus-reset can't do anything good here.
* Despite what it might say in scsi_error.c, there may well be commands
* on the controller, as the cciss driver registers twice, once as a block
* device for the logical drives, and once as a scsi device, for any tape
* drives. So we know there are no commands out on the tape drives, but we
* don't know there are no commands on the controller, and it is likely
* that there probably are, as the cciss block device is most commonly used
* as a boot device (embedded controller on HP/Compaq systems.)
*/
static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
{
int rc;
CommandList_struct *cmd_in_trouble;
ctlr_info_t **c;
int ctlr;
/* find the controller to which the command to be aborted was sent */
c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0];
if (c == NULL) /* paranoia */
return FAILED;
ctlr = (*c)->ctlr;
printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr);
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_in_trouble == NULL) { /* paranoia */
return FAILED;
}
/* send a reset to the SCSI LUN which the command was sent to */
rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0,
(unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0],
TYPE_MSG);
/* sendcmd turned off interrputs on the board, turn 'em back on. */
(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
if (rc == 0)
return SUCCESS;
printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr);
return FAILED;
}
static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
{
int rc;
CommandList_struct *cmd_to_abort;
ctlr_info_t **c;
int ctlr;
/* find the controller to which the command to be aborted was sent */
c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0];
if (c == NULL) /* paranoia */
return FAILED;
ctlr = (*c)->ctlr;
printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", ctlr);
/* find the command to be aborted */
cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_to_abort == NULL) /* paranoia */
return FAILED;
rc = sendcmd(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag,
0, 2, 0, 0,
(unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0],
TYPE_MSG);
/* sendcmd turned off interrputs on the board, turn 'em back on. */
(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
if (rc == 0)
return SUCCESS;
return FAILED;
}
#else /* no CONFIG_CISS_SCSI_TAPE */
/* If no tape support, then these become defined out of existence */

6
drivers/scsi/53c7xx.c
View file

@ -343,7 +343,7 @@ static void NCR53c7x0_soft_reset (struct Scsi_Host *host);
/* Size of event list (per host adapter) */
static int track_events = 0;
static struct Scsi_Host *first_host = NULL; /* Head of list of NCR boards */
static Scsi_Host_Template *the_template = NULL;
static struct scsi_host_template *the_template = NULL;
/* NCR53c710 script handling code */
@ -1103,7 +1103,7 @@ NCR53c7x0_init (struct Scsi_Host *host) {
}
/*
* Function : int ncr53c7xx_init(Scsi_Host_Template *tpnt, int board, int chip,
* Function : int ncr53c7xx_init(struct scsi_host_template *tpnt, int board, int chip,
* unsigned long base, int io_port, int irq, int dma, long long options,
* int clock);
*
@ -1118,7 +1118,7 @@ NCR53c7x0_init (struct Scsi_Host *host) {
*/
int
ncr53c7xx_init (Scsi_Host_Template *tpnt, int board, int chip,
ncr53c7xx_init (struct scsi_host_template *tpnt, int board, int chip,
unsigned long base, int io_port, int irq, int dma,
long long options, int clock)
{

2
drivers/scsi/53c7xx.h
View file

@ -1600,7 +1600,7 @@ struct NCR53c7x0_hostdata {
/* Paranoid people could use panic() here. */
#define FATAL(host) shutdown((host));
extern int ncr53c7xx_init(Scsi_Host_Template *tpnt, int board, int chip,
extern int ncr53c7xx_init(struct scsi_host_template *tpnt, int board, int chip,
unsigned long base, int io_port, int irq, int dma,
long long options, int clock);

29
drivers/scsi/Kconfig
View file

@ -1295,27 +1295,6 @@ config SCSI_QLOGIC_FAS
To compile this driver as a module, choose M here: the
module will be called qlogicfas.
config SCSI_QLOGIC_ISP
tristate "Qlogic ISP SCSI support (old driver)"
depends on PCI && SCSI && BROKEN
---help---
This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter
card is supported by the "AM53/79C974 PCI SCSI" driver.)
If you say Y here, make sure to choose "BIOS" at the question "PCI
access mode".
Please read the file <file:Documentation/scsi/qlogicisp.txt>. You
should also read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the
module will be called qlogicisp.
These days the hardware is also supported by the more modern qla1280
driver. In doubt use that one instead of qlogicisp.
config SCSI_QLOGIC_FC
tristate "Qlogic ISP FC SCSI support"
depends on PCI && SCSI
@ -1342,14 +1321,6 @@ config SCSI_QLOGIC_1280
To compile this driver as a module, choose M here: the
module will be called qla1280.
config SCSI_QLOGIC_1280_1040
bool "Qlogic QLA 1020/1040 SCSI support"
depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y
help
Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and
do not want to use the old driver. This option enables support in
the qla1280 driver for those host adapters.
config SCSI_QLOGICPTI
tristate "PTI Qlogic, ISP Driver"
depends on SBUS && SCSI

1
drivers/scsi/Makefile
View file

@ -78,7 +78,6 @@ obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
obj-$(CONFIG_SCSI_QLOGIC_ISP) += qlogicisp.o
obj-$(CONFIG_SCSI_QLOGIC_FC) += qlogicfc.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx/

10
drivers/scsi/NCR53C9x.c
View file

@ -529,7 +529,7 @@ void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs)
/* Allocate structure and insert basic data such as SCSI chip frequency
* data and a pointer to the device
*/
struct NCR_ESP* esp_allocate(Scsi_Host_Template *tpnt, void *esp_dev)
struct NCR_ESP* esp_allocate(struct scsi_host_template *tpnt, void *esp_dev)
{
struct NCR_ESP *esp, *elink;
struct Scsi_Host *esp_host;
@ -1006,7 +1006,7 @@ static void esp_exec_cmd(struct NCR_ESP *esp)
struct ESP_regs *eregs = esp->eregs;
struct esp_device *esp_dev;
Scsi_Cmnd *SCptr;
Scsi_Device *SDptr;
struct scsi_device *SDptr;
volatile unchar *cmdp = esp->esp_command;
unsigned char the_esp_command;
int lun, target;
@ -1687,7 +1687,7 @@ static inline int reconnect_lun(struct NCR_ESP *esp, struct ESP_regs *eregs)
static inline void esp_connect(struct NCR_ESP *esp, struct ESP_regs *eregs,
Scsi_Cmnd *sp)
{
Scsi_Device *dp = sp->device;
struct scsi_device *dp = sp->device;
struct esp_device *esp_dev = dp->hostdata;
if(esp->prev_soff != esp_dev->sync_max_offset ||
@ -3605,7 +3605,7 @@ irqreturn_t esp_intr(int irq, void *dev_id, struct pt_regs *pregs)
}
#endif
int esp_slave_alloc(Scsi_Device *SDptr)
int esp_slave_alloc(struct scsi_device *SDptr)
{
struct esp_device *esp_dev =
kmalloc(sizeof(struct esp_device), GFP_ATOMIC);
@ -3617,7 +3617,7 @@ int esp_slave_alloc(Scsi_Device *SDptr)
return 0;
}
void esp_slave_destroy(Scsi_Device *SDptr)
void esp_slave_destroy(struct scsi_device *SDptr)
{
struct NCR_ESP *esp = (struct NCR_ESP *) SDptr->host->hostdata;

6
drivers/scsi/NCR53C9x.h
View file

@ -653,7 +653,7 @@ extern int nesps, esps_in_use, esps_running;
/* External functions */
extern void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs);
extern struct NCR_ESP *esp_allocate(Scsi_Host_Template *, void *);
extern struct NCR_ESP *esp_allocate(struct scsi_host_template *, void *);
extern void esp_deallocate(struct NCR_ESP *);
extern void esp_release(void);
extern void esp_initialize(struct NCR_ESP *);
@ -664,6 +664,6 @@ extern int esp_abort(Scsi_Cmnd *);
extern int esp_reset(Scsi_Cmnd *);
extern int esp_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length,
int inout);
extern int esp_slave_alloc(Scsi_Device *);
extern void esp_slave_destroy(Scsi_Device *);
extern int esp_slave_alloc(struct scsi_device *);
extern void esp_slave_destroy(struct scsi_device *);
#endif /* !(NCR53C9X_H) */

4
drivers/scsi/NCR53c406a.c
View file

@ -447,7 +447,7 @@ static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int
}
#endif /* USE_PIO */
static int __init NCR53c406a_detect(Scsi_Host_Template * tpnt)
static int __init NCR53c406a_detect(struct scsi_host_template * tpnt)
{
int present = 0;
struct Scsi_Host *shpnt = NULL;
@ -1057,7 +1057,7 @@ MODULE_LICENSE("GPL");
* Use SG_NONE if DMA mode is enabled!
*/
static Scsi_Host_Template driver_template =
static struct scsi_host_template driver_template =
{
.proc_name = "NCR53c406a" /* proc_name */,
.name = "NCR53c406a" /* name */,

4
drivers/scsi/a2091.c
View file

@ -172,7 +172,7 @@ static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
}
}
int __init a2091_detect(Scsi_Host_Template *tpnt)
int __init a2091_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
struct Scsi_Host *instance;
@ -233,7 +233,7 @@ static int a2091_bus_reset(Scsi_Cmnd *cmd)
#define HOSTS_C
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "A2901",
.name = "Commodore A2091/A590 SCSI",
.detect = a2091_detect,

2
drivers/scsi/a2091.h
View file

@ -11,7 +11,7 @@
#include <linux/types.h>
int a2091_detect(Scsi_Host_Template *);
int a2091_detect(struct scsi_host_template *);
int a2091_release(struct Scsi_Host *);
const char *wd33c93_info(void);
int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));

4
drivers/scsi/a3000.c
View file

@ -168,7 +168,7 @@ static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
}
}
int __init a3000_detect(Scsi_Host_Template *tpnt)
int __init a3000_detect(struct scsi_host_template *tpnt)
{
wd33c93_regs regs;
@ -221,7 +221,7 @@ static int a3000_bus_reset(Scsi_Cmnd *cmd)
#define HOSTS_C
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "A3000",
.name = "Amiga 3000 built-in SCSI",
.detect = a3000_detect,

2
drivers/scsi/a3000.h
View file

@ -11,7 +11,7 @@
#include <linux/types.h>
int a3000_detect(Scsi_Host_Template *);
int a3000_detect(struct scsi_host_template *);
int a3000_release(struct Scsi_Host *);
const char *wd33c93_info(void);
int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));

23
drivers/scsi/aacraid/aachba.c
View file

@ -1579,18 +1579,10 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
break;
{
u64 capacity;
char cp[12];
unsigned int offset = 0;
char cp[13];
dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n"));
capacity = fsa_dev_ptr[cid].size - 1;
if (scsicmd->cmnd[13] > 12) {
offset = scsicmd->cmnd[13] - 12;
if (offset > sizeof(cp))
break;
memset(cp, 0, offset);
aac_internal_transfer(scsicmd, cp, 0, offset);
}
cp[0] = (capacity >> 56) & 0xff;
cp[1] = (capacity >> 48) & 0xff;
cp[2] = (capacity >> 40) & 0xff;
@ -1603,7 +1595,18 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
cp[9] = 0;
cp[10] = 2;
cp[11] = 0;
aac_internal_transfer(scsicmd, cp, offset, sizeof(cp));
cp[12] = 0;
aac_internal_transfer(scsicmd, cp, 0,
min((unsigned int)scsicmd->cmnd[13], sizeof(cp)));
if (sizeof(cp) < scsicmd->cmnd[13]) {
unsigned int len, offset = sizeof(cp);
memset(cp, 0, offset);
do {
len = min(scsicmd->cmnd[13]-offset, sizeof(cp));
aac_internal_transfer(scsicmd, cp, offset, len);
} while ((offset += len) < scsicmd->cmnd[13]);
}
/* Do not cache partition table for arrays */
scsicmd->device->removable = 1;

4
drivers/scsi/aacraid/commsup.c
View file

@ -820,7 +820,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
break;
/*
* Find the Scsi_Device associated with the SCSI
* Find the scsi_device associated with the SCSI
* address. Make sure we have the right array, and if
* so set the flag to initiate a new re-config once we
* see an AifEnConfigChange AIF come through.
@ -987,7 +987,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
/*
* Find the Scsi_Device associated with the SCSI address,
* Find the scsi_device associated with the SCSI address,
* and mark it as changed, invalidating the cache. This deals
* with changes to existing device IDs.
*/

6
drivers/scsi/advansys.c
View file

@ -114,7 +114,7 @@
#include "advansys.h"
#endif
and after "static Scsi_Host_Template builtin_scsi_hosts[] =":
and after "static struct scsi_host_template builtin_scsi_hosts[] =":
#ifdef CONFIG_SCSI_ADVANSYS
ADVANSYS,
@ -160,7 +160,7 @@
--- Driver Structures
--- Driver Data
--- Driver Function Prototypes
--- Linux 'Scsi_Host_Template' and advansys_setup() Functions
--- Linux 'struct scsi_host_template' and advansys_setup() Functions
--- Loadable Driver Support
--- Miscellaneous Driver Functions
--- Functions Required by the Asc Library
@ -4068,7 +4068,7 @@ STATIC void asc_prt_hex(char *f, uchar *, int);
/*
* --- Linux 'Scsi_Host_Template' and advansys_setup() Functions
* --- Linux 'struct scsi_host_template' and advansys_setup() Functions
*/
#ifdef CONFIG_PROC_FS

2
drivers/scsi/advansys.h
View file

@ -19,7 +19,7 @@
#define _ADVANSYS_H
/*
* Scsi_Host_Template function prototypes.
* struct scsi_host_template function prototypes.
*/
int advansys_detect(struct scsi_host_template *);
int advansys_release(struct Scsi_Host *);

4
drivers/scsi/aha152x.c
View file

@ -424,7 +424,7 @@ MODULE_DEVICE_TABLE(isapnp, id_table);
static int registered_count=0;
static struct Scsi_Host *aha152x_host[2];
static Scsi_Host_Template aha152x_driver_template;
static struct scsi_host_template aha152x_driver_template;
/*
* internal states of the host
@ -3464,7 +3464,7 @@ static int aha152x_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start
return thislength < length ? thislength : length;
}
static Scsi_Host_Template aha152x_driver_template = {
static struct scsi_host_template aha152x_driver_template = {
.module = THIS_MODULE,
.name = AHA152X_REVID,
.proc_name = "aha152x",

4
drivers/scsi/aha1542.c
View file

@ -1021,7 +1021,7 @@ __setup("aha1542=",do_setup);
#endif
/* return non-zero on detection */
static int __init aha1542_detect(Scsi_Host_Template * tpnt)
static int __init aha1542_detect(struct scsi_host_template * tpnt)
{
unsigned char dma_chan;
unsigned char irq_level;
@ -1789,7 +1789,7 @@ static int aha1542_biosparam(struct scsi_device *sdev,
MODULE_LICENSE("GPL");
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "aha1542",
.name = "Adaptec 1542",
.detect = aha1542_detect,

2
drivers/scsi/aha1542.h
View file

@ -131,7 +131,7 @@ struct ccb { /* Command Control Block 5.3 */
/* REQUEST SENSE */
};
static int aha1542_detect(Scsi_Host_Template *);
static int aha1542_detect(struct scsi_host_template *);
static int aha1542_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static int aha1542_bus_reset(Scsi_Cmnd * SCpnt);
static int aha1542_dev_reset(Scsi_Cmnd * SCpnt);

2
drivers/scsi/aha1740.c
View file

@ -570,7 +570,7 @@ static int aha1740_eh_abort_handler (Scsi_Cmnd *dummy)
return 0;
}
static Scsi_Host_Template aha1740_template = {
static struct scsi_host_template aha1740_template = {
.module = THIS_MODULE,
.proc_name = "aha1740",
.proc_info = aha1740_proc_info,

37
drivers/scsi/aic7xxx/aic79xx_osm.c
View file

@ -436,29 +436,20 @@ ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
{
struct ahd_softc *ahd;
struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
int rtn = SCSI_MLQUEUE_HOST_BUSY;
unsigned long flags;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
/*
* Close the race of a command that was in the process of
* being queued to us just as our simq was frozen. Let
* DV commands through so long as we are only frozen to
* perform DV.
*/
if (ahd->platform_data->qfrozen != 0) {
printf("%s: queue frozen\n", ahd_name(ahd));
ahd_lock(ahd, &flags);
if (ahd->platform_data->qfrozen == 0) {
cmd->scsi_done = scsi_done;
cmd->result = CAM_REQ_INPROG << 16;
rtn = ahd_linux_run_command(ahd, dev, cmd);
return SCSI_MLQUEUE_HOST_BUSY;
}
/*
* Save the callback on completion function.
*/
cmd->scsi_done = scsi_done;
cmd->result = CAM_REQ_INPROG << 16;
return ahd_linux_run_command(ahd, dev, cmd);
ahd_unlock(ahd, &flags);
return rtn;
}
static inline struct scsi_target **
@ -1081,7 +1072,6 @@ ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *templa
*((struct ahd_softc **)host->hostdata) = ahd;
ahd_lock(ahd, &s);
scsi_assign_lock(host, &ahd->platform_data->spin_lock);
ahd->platform_data->host = host;
host->can_queue = AHD_MAX_QUEUE;
host->cmd_per_lun = 2;
@ -2062,6 +2052,7 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
int wait;
int disconnected;
ahd_mode_state saved_modes;
unsigned long flags;
pending_scb = NULL;
paused = FALSE;
@ -2077,7 +2068,7 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
printf(" 0x%x", cmd->cmnd[cdb_byte]);
printf("\n");
spin_lock_irq(&ahd->platform_data->spin_lock);
ahd_lock(ahd, &flags);
/*
* First determine if we currently own this command.
@ -2291,7 +2282,8 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
int ret;
ahd->platform_data->flags |= AHD_SCB_UP_EH_SEM;
spin_unlock_irq(&ahd->platform_data->spin_lock);
ahd_unlock(ahd, &flags);
init_timer(&timer);
timer.data = (u_long)ahd;
timer.expires = jiffies + (5 * HZ);
@ -2305,9 +2297,8 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
printf("Timer Expired\n");
retval = FAILED;
}
spin_lock_irq(&ahd->platform_data->spin_lock);
}
spin_unlock_irq(&ahd->platform_data->spin_lock);
ahd_unlock(ahd, &flags);
return (retval);
}

39
drivers/scsi/aic7xxx/aic7xxx_osm.c
View file

@ -476,26 +476,20 @@ ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
{
struct ahc_softc *ahc;
struct ahc_linux_device *dev = scsi_transport_device_data(cmd->device);
int rtn = SCSI_MLQUEUE_HOST_BUSY;
unsigned long flags;
ahc = *(struct ahc_softc **)cmd->device->host->hostdata;
/*
* Save the callback on completion function.
*/
cmd->scsi_done = scsi_done;
ahc_lock(ahc, &flags);
if (ahc->platform_data->qfrozen == 0) {
cmd->scsi_done = scsi_done;
cmd->result = CAM_REQ_INPROG << 16;
rtn = ahc_linux_run_command(ahc, dev, cmd);
}
ahc_unlock(ahc, &flags);
/*
* Close the race of a command that was in the process of
* being queued to us just as our simq was frozen. Let
* DV commands through so long as we are only frozen to
* perform DV.
*/
if (ahc->platform_data->qfrozen != 0)
return SCSI_MLQUEUE_HOST_BUSY;
cmd->result = CAM_REQ_INPROG << 16;
return ahc_linux_run_command(ahc, dev, cmd);
return rtn;
}
static inline struct scsi_target **
@ -1079,7 +1073,6 @@ ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *templa
*((struct ahc_softc **)host->hostdata) = ahc;
ahc_lock(ahc, &s);
scsi_assign_lock(host, &ahc->platform_data->spin_lock);
ahc->platform_data->host = host;
host->can_queue = AHC_MAX_QUEUE;
host->cmd_per_lun = 2;
@ -2111,6 +2104,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
int paused;
int wait;
int disconnected;
unsigned long flags;
pending_scb = NULL;
paused = FALSE;
@ -2125,7 +2119,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
printf(" 0x%x", cmd->cmnd[cdb_byte]);
printf("\n");
spin_lock_irq(&ahc->platform_data->spin_lock);
ahc_lock(ahc, &flags);
/*
* First determine if we currently own this command.
@ -2357,7 +2351,8 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
int ret;
ahc->platform_data->flags |= AHC_UP_EH_SEMAPHORE;
spin_unlock_irq(&ahc->platform_data->spin_lock);
ahc_unlock(ahc, &flags);
init_timer(&timer);
timer.data = (u_long)ahc;
timer.expires = jiffies + (5 * HZ);
@ -2371,10 +2366,8 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
printf("Timer Expired\n");
retval = FAILED;
}
spin_lock_irq(&ahc->platform_data->spin_lock);
}
spin_unlock_irq(&ahc->platform_data->spin_lock);
} else
ahc_unlock(ahc, &flags);
return (retval);
}

18
drivers/scsi/aic7xxx_old.c
View file

@ -6514,7 +6514,7 @@ do_aic7xxx_isr(int irq, void *dev_id, struct pt_regs *regs)
static void
aic7xxx_init_transinfo(struct aic7xxx_host *p, struct aic_dev_data *aic_dev)
{
Scsi_Device *sdpnt = aic_dev->SDptr;
struct scsi_device *sdpnt = aic_dev->SDptr;
unsigned char tindex;
tindex = sdpnt->id | (sdpnt->channel << 3);
@ -6581,7 +6581,7 @@ aic7xxx_init_transinfo(struct aic7xxx_host *p, struct aic_dev_data *aic_dev)
* Set up the initial aic_dev struct pointers
*-F*************************************************************************/
static int
aic7xxx_slave_alloc(Scsi_Device *SDptr)
aic7xxx_slave_alloc(struct scsi_device *SDptr)
{
struct aic7xxx_host *p = (struct aic7xxx_host *)SDptr->host->hostdata;
struct aic_dev_data *aic_dev;
@ -6644,7 +6644,7 @@ aic7xxx_slave_alloc(Scsi_Device *SDptr)
* queueing to be [en|dis]abled for a specific adapter.
*-F*************************************************************************/
static void
aic7xxx_device_queue_depth(struct aic7xxx_host *p, Scsi_Device *device)
aic7xxx_device_queue_depth(struct aic7xxx_host *p, struct scsi_device *device)
{
int tag_enabled = FALSE;
struct aic_dev_data *aic_dev = device->hostdata;
@ -6734,7 +6734,7 @@ aic7xxx_device_queue_depth(struct aic7xxx_host *p, Scsi_Device *device)
* prepare for this device to go away
*-F*************************************************************************/
static void
aic7xxx_slave_destroy(Scsi_Device *SDptr)
aic7xxx_slave_destroy(struct scsi_device *SDptr)
{
struct aic_dev_data *aic_dev = SDptr->hostdata;
@ -6754,7 +6754,7 @@ aic7xxx_slave_destroy(Scsi_Device *SDptr)
* depths, allocate command structs, etc.
*-F*************************************************************************/
static int
aic7xxx_slave_configure(Scsi_Device *SDptr)
aic7xxx_slave_configure(struct scsi_device *SDptr)
{
struct aic7xxx_host *p = (struct aic7xxx_host *) SDptr->host->hostdata;
struct aic_dev_data *aic_dev;
@ -7865,7 +7865,7 @@ detect_maxscb(struct aic7xxx_host *p)
* Register a Adaptec aic7xxx chip SCSI controller with the kernel.
*-F*************************************************************************/
static int
aic7xxx_register(Scsi_Host_Template *template, struct aic7xxx_host *p,
aic7xxx_register(struct scsi_host_template *template, struct aic7xxx_host *p,
int reset_delay)
{
int i, result;
@ -8412,7 +8412,7 @@ aic7xxx_chip_reset(struct aic7xxx_host *p)
* and a pointer to a aic7xxx_host struct upon success.
*-F*************************************************************************/
static struct aic7xxx_host *
aic7xxx_alloc(Scsi_Host_Template *sht, struct aic7xxx_host *temp)
aic7xxx_alloc(struct scsi_host_template *sht, struct aic7xxx_host *temp)
{
struct aic7xxx_host *p = NULL;
struct Scsi_Host *host;
@ -8991,7 +8991,7 @@ aic7xxx_configure_bugs(struct aic7xxx_host *p)
* mid-level SCSI code is overhauled.
*-F*************************************************************************/
static int
aic7xxx_detect(Scsi_Host_Template *template)
aic7xxx_detect(struct scsi_host_template *template)
{
struct aic7xxx_host *temp_p = NULL;
struct aic7xxx_host *current_p = NULL;
@ -11161,7 +11161,7 @@ MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(AIC7XXX_H_VERSION);
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_info = aic7xxx_proc_info,
.detect = aic7xxx_detect,
.release = aic7xxx_release,

8
drivers/scsi/amiga7xx.c
View file

@ -29,7 +29,7 @@
#include "amiga7xx.h"
static int amiga7xx_register_one(Scsi_Host_Template *tpnt,
static int amiga7xx_register_one(struct scsi_host_template *tpnt,
unsigned long address)
{
long long options;
@ -65,7 +65,7 @@ static struct {
{ 0 }
};
static int __init amiga7xx_zorro_detect(Scsi_Host_Template *tpnt)
static int __init amiga7xx_zorro_detect(struct scsi_host_template *tpnt)
{
int num = 0, i;
struct zorro_dev *z = NULL;
@ -89,7 +89,7 @@ static int __init amiga7xx_zorro_detect(Scsi_Host_Template *tpnt)
#endif /* CONFIG_ZORRO */
int __init amiga7xx_detect(Scsi_Host_Template *tpnt)
int __init amiga7xx_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
int num = 0;
@ -122,7 +122,7 @@ static int amiga7xx_release(struct Scsi_Host *shost)
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.name = "Amiga NCR53c710 SCSI",
.detect = amiga7xx_detect,
.release = amiga7xx_release,

2
drivers/scsi/amiga7xx.h
View file

@ -2,7 +2,7 @@
#include <linux/types.h>
int amiga7xx_detect(Scsi_Host_Template *);
int amiga7xx_detect(struct scsi_host_template *);
const char *NCR53c7x0_info(void);
int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int NCR53c7xx_abort(Scsi_Cmnd *);

6
drivers/scsi/arm/acornscsi.c
View file

@ -896,7 +896,7 @@ void acornscsi_done(AS_Host *host, Scsi_Cmnd **SCpntp, unsigned int result)
* Notes : this will only be one SG entry or less
*/
static
void acornscsi_data_updateptr(AS_Host *host, Scsi_Pointer *SCp, unsigned int length)
void acornscsi_data_updateptr(AS_Host *host, struct scsi_pointer *SCp, unsigned int length)
{
SCp->ptr += length;
SCp->this_residual -= length;
@ -2862,7 +2862,7 @@ int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
int length, int inout)
{
int pos, begin = 0, devidx;
Scsi_Device *scd;
struct scsi_device *scd;
AS_Host *host;
char *p = buffer;
@ -2971,7 +2971,7 @@ int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
return pos;
}
static Scsi_Host_Template acornscsi_template = {
static struct scsi_host_template acornscsi_template = {
.module = THIS_MODULE,
.proc_info = acornscsi_proc_info,
.name = "AcornSCSI",

2
drivers/scsi/arm/acornscsi.h
View file

@ -292,7 +292,7 @@ typedef struct acornscsi_hostdata {
unsigned char tag; /* reconnected tag */
} reconnected;
Scsi_Pointer SCp; /* current commands data pointer */
struct scsi_pointer SCp; /* current commands data pointer */
MsgQueue_t msgs;

8
drivers/scsi/arm/arxescsi.c
View file

@ -65,7 +65,7 @@ struct arxescsi_info {
* Returns : 0 if we should not set CMD_WITHDMA for transfer info command
*/
static fasdmatype_t
arxescsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp,
arxescsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
fasdmadir_t direction, fasdmatype_t min_type)
{
/*
@ -111,7 +111,7 @@ static void arxescsi_pseudo_dma_write(unsigned char *addr, void __iomem *base)
* transfer - minimum number of bytes we expect to transfer
*/
static void
arxescsi_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp,
arxescsi_dma_pseudo(struct Scsi_Host *host, struct scsi_pointer *SCp,
fasdmadir_t direction, int transfer)
{
struct arxescsi_info *info = (struct arxescsi_info *)host->hostdata;
@ -197,7 +197,7 @@ arxescsi_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp,
* Params : host - host
* SCpnt - command
*/
static void arxescsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp)
static void arxescsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
{
/*
* no DMA to stop
@ -261,7 +261,7 @@ arxescsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t off
return pos;
}
static Scsi_Host_Template arxescsi_template = {
static struct scsi_host_template arxescsi_template = {
.proc_info = arxescsi_proc_info,
.name = "ARXE SCSI card",
.info = arxescsi_info,

2
drivers/scsi/arm/cumana_1.c
View file

@ -238,7 +238,7 @@ static void cumanascsi_write(struct Scsi_Host *instance, int reg, int value)
#include "../NCR5380.c"
static Scsi_Host_Template cumanascsi_template = {
static struct scsi_host_template cumanascsi_template = {
.module = THIS_MODULE,
.name = "Cumana 16-bit SCSI",
.info = cumanascsi_info,

8
drivers/scsi/arm/cumana_2.c
View file

@ -157,7 +157,7 @@ cumanascsi_2_intr(int irq, void *dev_id, struct pt_regs *regs)
* Returns : type of transfer to be performed
*/
static fasdmatype_t
cumanascsi_2_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp,
cumanascsi_2_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
fasdmadir_t direction, fasdmatype_t min_type)
{
struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata;
@ -209,7 +209,7 @@ cumanascsi_2_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp,
* transfer - minimum number of bytes we expect to transfer
*/
static void
cumanascsi_2_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp,
cumanascsi_2_dma_pseudo(struct Scsi_Host *host, struct scsi_pointer *SCp,
fasdmadir_t direction, int transfer)
{
struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata;
@ -283,7 +283,7 @@ cumanascsi_2_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp,
* SCpnt - command
*/
static void
cumanascsi_2_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp)
cumanascsi_2_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
{
struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata;
if (info->info.scsi.dma != NO_DMA) {
@ -381,7 +381,7 @@ int cumanascsi_2_proc_info (struct Scsi_Host *host, char *buffer, char **start,
return pos;
}
static Scsi_Host_Template cumanascsi2_template = {
static struct scsi_host_template cumanascsi2_template = {
.module = THIS_MODULE,
.proc_info = cumanascsi_2_proc_info,
.name = "Cumana SCSI II",

2
drivers/scsi/arm/ecoscsi.c
View file

@ -155,7 +155,7 @@ printk("reading %p len %d\n",addr, len);
#include "../NCR5380.c"
static Scsi_Host_Template ecoscsi_template = {
static struct scsi_host_template ecoscsi_template = {
.module = THIS_MODULE,
.name = "Serial Port EcoSCSI NCR5380",
.proc_name = "ecoscsi",

8
drivers/scsi/arm/eesox.c
View file

@ -158,7 +158,7 @@ eesoxscsi_intr(int irq, void *dev_id, struct pt_regs *regs)
* Returns : type of transfer to be performed
*/
static fasdmatype_t
eesoxscsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp,
eesoxscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
fasdmadir_t direction, fasdmatype_t min_type)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
@ -353,7 +353,7 @@ static void eesoxscsi_buffer_out(void *buf, int length, void __iomem *base)
}
static void
eesoxscsi_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp,
eesoxscsi_dma_pseudo(struct Scsi_Host *host, struct scsi_pointer *SCp,
fasdmadir_t dir, int transfer_size)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
@ -370,7 +370,7 @@ eesoxscsi_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp,
* SCpnt - command
*/
static void
eesoxscsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp)
eesoxscsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
if (info->info.scsi.dma != NO_DMA)
@ -499,7 +499,7 @@ static ssize_t eesoxscsi_store_term(struct device *dev, struct device_attribute
static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
eesoxscsi_show_term, eesoxscsi_store_term);
static Scsi_Host_Template eesox_template = {
static struct scsi_host_template eesox_template = {
.module = THIS_MODULE,
.proc_info = eesoxscsi_proc_info,
.name = "EESOX SCSI",

10
drivers/scsi/arm/fas216.c
View file

@ -173,7 +173,7 @@ static void fas216_dumpstate(FAS216_Info *info)
fas216_readb(info, REG_CTCH));
}
static void print_SCp(Scsi_Pointer *SCp, const char *prefix, const char *suffix)
static void print_SCp(struct scsi_pointer *SCp, const char *prefix, const char *suffix)
{
printk("%sptr %p this_residual 0x%x buffer %p buffers_residual 0x%x%s",
prefix, SCp->ptr, SCp->this_residual, SCp->buffer,
@ -628,7 +628,7 @@ static void fas216_handlesync(FAS216_Info *info, char *msg)
*/
static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
{
Scsi_Pointer *SCp = &info->scsi.SCp;
struct scsi_pointer *SCp = &info->scsi.SCp;
fas216_checkmagic(info);
@ -668,7 +668,7 @@ static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
*/
static void fas216_pio(FAS216_Info *info, fasdmadir_t direction)
{
Scsi_Pointer *SCp = &info->scsi.SCp;
struct scsi_pointer *SCp = &info->scsi.SCp;
fas216_checkmagic(info);
@ -2559,7 +2559,7 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt)
{
FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
unsigned long flags;
Scsi_Device *SDpnt;
struct scsi_device *SDpnt;
fas216_checkmagic(info);
fas216_log(info, LOG_ERROR, "resetting bus");
@ -3000,7 +3000,7 @@ int fas216_print_stats(FAS216_Info *info, char *buffer)
int fas216_print_devices(FAS216_Info *info, char *buffer)
{
struct fas216_device *dev;
Scsi_Device *scd;
struct scsi_device *scd;
char *p = buffer;
p += sprintf(p, "Device/Lun TaggedQ Parity Sync\n");

8
drivers/scsi/arm/fas216.h
View file

@ -243,7 +243,7 @@ typedef struct {
unsigned int irq; /* interrupt */
int dma; /* dma channel */
Scsi_Pointer SCp; /* current commands data pointer */
struct scsi_pointer SCp; /* current commands data pointer */
MsgQueue_t msgs; /* message queue for connected device */
@ -304,9 +304,9 @@ typedef struct {
/* dma */
struct {
fasdmatype_t transfer_type; /* current type of DMA transfer */
fasdmatype_t (*setup) (struct Scsi_Host *host, Scsi_Pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma);
void (*pseudo)(struct Scsi_Host *host, Scsi_Pointer *SCp, fasdmadir_t direction, int transfer);
void (*stop) (struct Scsi_Host *host, Scsi_Pointer *SCp);
fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma);
void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer);
void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp);
} dma;
/* miscellaneous */

2
drivers/scsi/arm/oak.c
View file

@ -111,7 +111,7 @@ printk("reading %p len %d\n", addr, len);
#include "../NCR5380.c"
static Scsi_Host_Template oakscsi_template = {
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
.proc_info = oakscsi_proc_info,
.name = "Oak 16-bit SCSI",

6
drivers/scsi/arm/powertec.c
View file

@ -132,7 +132,7 @@ powertecscsi_intr(int irq, void *dev_id, struct pt_regs *regs)
* Returns : type of transfer to be performed
*/
static fasdmatype_t
powertecscsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp,
powertecscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
fasdmadir_t direction, fasdmatype_t min_type)
{
struct powertec_info *info = (struct powertec_info *)host->hostdata;
@ -174,7 +174,7 @@ powertecscsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp,
* SCpnt - command
*/
static void
powertecscsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp)
powertecscsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
{
struct powertec_info *info = (struct powertec_info *)host->hostdata;
if (info->info.scsi.dma != NO_DMA)
@ -293,7 +293,7 @@ powertecscsi_store_term(struct device *dev, struct device_attribute *attr, const
static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
powertecscsi_show_term, powertecscsi_store_term);
static Scsi_Host_Template powertecscsi_template = {
static struct scsi_host_template powertecscsi_template = {
.module = THIS_MODULE,
.proc_info = powertecscsi_proc_info,
.name = "PowerTec SCSI",

8
drivers/scsi/arm/scsi.h
View file

@ -18,7 +18,7 @@
* The scatter-gather list handling. This contains all
* the yucky stuff that needs to be fixed properly.
*/
static inline int copy_SCp_to_sg(struct scatterlist *sg, Scsi_Pointer *SCp, int max)
static inline int copy_SCp_to_sg(struct scatterlist *sg, struct scsi_pointer *SCp, int max)
{
int bufs = SCp->buffers_residual;
@ -32,7 +32,7 @@ static inline int copy_SCp_to_sg(struct scatterlist *sg, Scsi_Pointer *SCp, int
return bufs + 1;
}
static inline int next_SCp(Scsi_Pointer *SCp)
static inline int next_SCp(struct scsi_pointer *SCp)
{
int ret = SCp->buffers_residual;
if (ret) {
@ -49,7 +49,7 @@ static inline int next_SCp(Scsi_Pointer *SCp)
return ret;
}
static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp)
static inline unsigned char get_next_SCp_byte(struct scsi_pointer *SCp)
{
char c = *SCp->ptr;
@ -59,7 +59,7 @@ static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp)
return c;
}
static inline void put_next_SCp_byte(Scsi_Pointer *SCp, unsigned char c)
static inline void put_next_SCp_byte(struct scsi_pointer *SCp, unsigned char c)
{
*SCp->ptr = c;
SCp->ptr += 1;

2
drivers/scsi/atari_NCR5380.c
View file

@ -255,7 +255,7 @@
*/
static struct Scsi_Host *first_instance = NULL;
static Scsi_Host_Template *the_template = NULL;
static struct scsi_host_template *the_template = NULL;
/* Macros ease life... :-) */
#define SETUP_HOSTDATA(in) \

4
drivers/scsi/atari_scsi.c
View file

@ -600,7 +600,7 @@ int atari_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
#endif
int atari_scsi_detect (Scsi_Host_Template *host)
int atari_scsi_detect (struct scsi_host_template *host)
{
static int called = 0;
struct Scsi_Host *instance;
@ -1141,7 +1141,7 @@ static void atari_scsi_falcon_reg_write( unsigned char reg, unsigned char value
#include "atari_NCR5380.c"
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_info = atari_scsi_proc_info,
.name = "Atari native SCSI",
.detect = atari_scsi_detect,

2
drivers/scsi/atari_scsi.h
View file

@ -18,7 +18,7 @@
/* (I_HAVE_OVERRUNS stuff removed) */
#ifndef ASM
int atari_scsi_detect (Scsi_Host_Template *);
int atari_scsi_detect (struct scsi_host_template *);
const char *atari_scsi_info (struct Scsi_Host *);
int atari_scsi_reset (Scsi_Cmnd *, unsigned int);
#ifdef MODULE

4
drivers/scsi/blz1230.c
View file

@ -94,7 +94,7 @@ static volatile unsigned char cmd_buffer[16];
*/
/***************************************************************** Detection */
int __init blz1230_esp_detect(Scsi_Host_Template *tpnt)
int __init blz1230_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
struct zorro_dev *z = NULL;
@ -328,7 +328,7 @@ int blz1230_esp_release(struct Scsi_Host *instance)
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "esp-blz1230",
.proc_info = esp_proc_info,
.name = "Blizzard1230 SCSI IV",

4
drivers/scsi/blz2060.c
View file

@ -90,7 +90,7 @@ static volatile unsigned char cmd_buffer[16];
*/
/***************************************************************** Detection */
int __init blz2060_esp_detect(Scsi_Host_Template *tpnt)
int __init blz2060_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
struct zorro_dev *z = NULL;
@ -282,7 +282,7 @@ int blz2060_esp_release(struct Scsi_Host *instance)
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "esp-blz2060",
.proc_info = esp_proc_info,
.name = "Blizzard2060 SCSI",

4
drivers/scsi/bvme6000.c
View file

@ -23,7 +23,7 @@
#include<linux/stat.h>
int bvme6000_scsi_detect(Scsi_Host_Template *tpnt)
int bvme6000_scsi_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
int clock;
@ -59,7 +59,7 @@ static int bvme6000_scsi_release(struct Scsi_Host *shost)
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.name = "BVME6000 NCR53c710 SCSI",
.detect = bvme6000_scsi_detect,
.release = bvme6000_scsi_release,

2
drivers/scsi/bvme6000.h
View file

@ -3,7 +3,7 @@
#include <linux/types.h>
int bvme6000_scsi_detect(Scsi_Host_Template *);
int bvme6000_scsi_detect(struct scsi_host_template *);
const char *NCR53c7x0_info(void);
int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int NCR53c7xx_abort(Scsi_Cmnd *);

4
drivers/scsi/cyberstorm.c
View file

@ -104,7 +104,7 @@ static volatile unsigned char cmd_buffer[16];
*/
/***************************************************************** Detection */
int __init cyber_esp_detect(Scsi_Host_Template *tpnt)
int __init cyber_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
struct zorro_dev *z = NULL;
@ -353,7 +353,7 @@ int cyber_esp_release(struct Scsi_Host *instance)
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "esp-cyberstorm",
.proc_info = esp_proc_info,
.name = "CyberStorm SCSI",

4
drivers/scsi/cyberstormII.c
View file

@ -81,7 +81,7 @@ static volatile unsigned char cmd_buffer[16];
*/
/***************************************************************** Detection */
int __init cyberII_esp_detect(Scsi_Host_Template *tpnt)
int __init cyberII_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
struct zorro_dev *z = NULL;
@ -290,7 +290,7 @@ int cyberII_esp_release(struct Scsi_Host *instance)
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "esp-cyberstormII",
.proc_info = esp_proc_info,
.name = "CyberStorm Mk II SCSI",

2
drivers/scsi/dec_esp.c
View file

@ -133,7 +133,7 @@ static struct scsi_host_template driver_template = {
#include "scsi_module.c"
/***************************************************************** Detection */
static int dec_esp_detect(Scsi_Host_Template * tpnt)
static int dec_esp_detect(struct scsi_host_template * tpnt)
{
struct NCR_ESP *esp;
struct ConfigDev *esp_dev;

2
drivers/scsi/dpti.h
View file

@ -44,7 +44,7 @@ static int adpt_device_reset(struct scsi_cmnd* cmd);
/*
* Scsi_Host_Template (see hosts.h)
* struct scsi_host_template (see hosts.h)
*/
#define DPT_DRIVER_NAME "Adaptec I2O RAID"

6
drivers/scsi/dtc.c
View file

@ -199,7 +199,7 @@ static void __init dtc_setup(char *str, int *ints)
#endif
/*
* Function : int dtc_detect(Scsi_Host_Template * tpnt)
* Function : int dtc_detect(struct scsi_host_template * tpnt)
*
* Purpose : detects and initializes DTC 3180/3280 controllers
* that were autoprobed, overridden on the LILO command line,
@ -211,7 +211,7 @@ static void __init dtc_setup(char *str, int *ints)
*
*/
static int __init dtc_detect(Scsi_Host_Template * tpnt)
static int __init dtc_detect(struct scsi_host_template * tpnt)
{
static int current_override = 0, current_base = 0;
struct Scsi_Host *instance;
@ -471,7 +471,7 @@ static int dtc_release(struct Scsi_Host *shost)
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.name = "DTC 3180/3280 ",
.detect = dtc_detect,
.release = dtc_release,

2
drivers/scsi/dtc.h
View file

@ -35,7 +35,7 @@
static int dtc_abort(Scsi_Cmnd *);
static int dtc_biosparam(struct scsi_device *, struct block_device *,
sector_t, int*);
static int dtc_detect(Scsi_Host_Template *);
static int dtc_detect(struct scsi_host_template *);
static int dtc_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static int dtc_bus_reset(Scsi_Cmnd *);

4
drivers/scsi/fastlane.c
View file

@ -125,7 +125,7 @@ static inline void dma_clear(struct NCR_ESP *esp)
}
/***************************************************************** Detection */
int __init fastlane_esp_detect(Scsi_Host_Template *tpnt)
int __init fastlane_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
struct zorro_dev *z = NULL;
@ -398,7 +398,7 @@ int fastlane_esp_release(struct Scsi_Host *instance)
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "esp-fastlane",
.proc_info = esp_proc_info,
.name = "Fastlane SCSI",

8
drivers/scsi/fcal.c
View file

@ -70,7 +70,7 @@ static unsigned char target2alpa[] = {
static int fcal_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd);
int fcal_slave_configure(Scsi_Device *device)
int fcal_slave_configure(struct scsi_device *device)
{
int depth_to_use;
@ -89,7 +89,7 @@ int fcal_slave_configure(Scsi_Device *device)
/* Detect all FC Arbitrated Loops attached to the machine.
fc4 module has done all the work for us... */
int __init fcal_detect(Scsi_Host_Template *tpnt)
int __init fcal_detect(struct scsi_host_template *tpnt)
{
int nfcals = 0;
fc_channel *fc;
@ -244,7 +244,7 @@ int fcal_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t of
SPRINTF (" [AL-PA: %02x, Port WWN: %08x%08x, Node WWN: %08x%08x] Not responded to PRLI\n",
alpa, u1[0], u1[1], u2[0], u2[1]);
} else {
Scsi_Device *scd;
struct scsi_device *scd;
shost_for_each_device(scd, host)
if (scd->id == target) {
SPRINTF (" [AL-PA: %02x, Id: %02d, Port WWN: %08x%08x, Node WWN: %08x%08x] ",
@ -297,7 +297,7 @@ static int fcal_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmn
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.name = "Fibre Channel Arbitrated Loop",
.detect = fcal_detect,
.release = fcal_release,

4
drivers/scsi/fcal.h
View file

@ -20,8 +20,8 @@ struct fcal {
for a particular channel */
#define FCAL_CAN_QUEUE 512
int fcal_detect(Scsi_Host_Template *);
int fcal_detect(struct scsi_host_template *);
int fcal_release(struct Scsi_Host *);
int fcal_slave_configure(Scsi_Device *);
int fcal_slave_configure(struct scsi_device *);
#endif /* !(_FCAL_H) */

4
drivers/scsi/fd_mcs.c
View file

@ -343,7 +343,7 @@ static void fd_mcs_make_bus_idle(struct Scsi_Host *shpnt)
outb(0x01 | PARITY_MASK, TMC_Cntl_port);
}
static int fd_mcs_detect(Scsi_Host_Template * tpnt)
static int fd_mcs_detect(struct scsi_host_template * tpnt)
{
int loop;
struct Scsi_Host *shpnt;
@ -1343,7 +1343,7 @@ static int fd_mcs_biosparam(struct scsi_device * disk, struct block_device *bdev
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "fd_mcs",
.proc_info = fd_mcs_proc_info,
.detect = fd_mcs_detect,

6
drivers/scsi/g_NCR5380.c
View file

@ -285,7 +285,7 @@ static int __init do_DTC3181E_setup(char *str)
* Locks: none
*/
int __init generic_NCR5380_detect(Scsi_Host_Template * tpnt)
int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
{
static int current_override = 0;
int count, i;
@ -798,7 +798,7 @@ static int generic_NCR5380_proc_info(struct Scsi_Host *scsi_ptr, char *buffer, c
Scsi_Cmnd *ptr;
struct NCR5380_hostdata *hostdata;
#ifdef NCR5380_STATS
Scsi_Device *dev;
struct scsi_device *dev;
extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
#endif
@ -899,7 +899,7 @@ static int generic_NCR5380_proc_info(struct Scsi_Host *scsi_ptr, char *buffer, c
#undef PRINTP
#undef ANDP
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_info = generic_NCR5380_proc_info,
.name = "Generic NCR5380/NCR53C400 Scsi Driver",
.detect = generic_NCR5380_detect,

2
drivers/scsi/g_NCR5380.h
View file

@ -45,7 +45,7 @@
#ifndef ASM
static int generic_NCR5380_abort(Scsi_Cmnd *);
static int generic_NCR5380_detect(Scsi_Host_Template *);
static int generic_NCR5380_detect(struct scsi_host_template *);
static int generic_NCR5380_release_resources(struct Scsi_Host *);
static int generic_NCR5380_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static int generic_NCR5380_bus_reset(Scsi_Cmnd *);

12
drivers/scsi/gdth.c
View file

@ -94,7 +94,7 @@
* Bugfix free_irq()
*
* Revision 1.56 2001/08/09 11:19:39 achim
* Scsi_Host_Template changes
* struct scsi_host_template changes
*
* Revision 1.55 2001/08/09 10:11:28 achim
* Command HOST_UNFREEZE_IO before cache service init.
@ -4153,7 +4153,7 @@ int __init option_setup(char *str)
return 1;
}
static int __init gdth_detect(Scsi_Host_Template *shtp)
static int __init gdth_detect(struct scsi_host_template *shtp)
{
struct Scsi_Host *shp;
gdth_pci_str pcistr[MAXHA];
@ -5562,7 +5562,7 @@ static void gdth_flush(int hanum)
#else
Scsi_Cmnd *scp;
#endif
Scsi_Device *sdev;
struct scsi_device *sdev;
char cmnd[MAX_COMMAND_SIZE];
memset(cmnd, 0xff, MAX_COMMAND_SIZE);
@ -5624,10 +5624,10 @@ static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
gdth_cmd_str gdtcmd;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
Scsi_Request *srp;
Scsi_Device *sdev;
struct scsi_device *sdev;
#else
Scsi_Cmnd *scp;
Scsi_Device *sdev;
struct scsi_device *sdev;
#endif
char cmnd[MAX_COMMAND_SIZE];
#endif
@ -5683,7 +5683,7 @@ static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
return NOTIFY_OK;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "gdth",
.proc_info = gdth_proc_info,
.name = "GDT SCSI Disk Array Controller",

4
drivers/scsi/gdth.h
View file

@ -944,9 +944,9 @@ typedef struct {
ulong dma32_cnt, dma64_cnt; /* statistics: DMA buffer */
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
Scsi_Device *sdev;
struct scsi_device *sdev;
#else
Scsi_Device sdev;
struct scsi_device sdev;
#endif
} gdth_ha_str;

10
drivers/scsi/gdth_proc.c
View file

@ -54,10 +54,10 @@ static int gdth_set_info(char *buffer,int length,struct Scsi_Host *host,
int ret_val = -EINVAL;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
Scsi_Request *scp;
Scsi_Device *sdev;
struct scsi_device *sdev;
#else
Scsi_Cmnd *scp;
Scsi_Device *sdev;
struct scsi_device *sdev;
#endif
TRACE2(("gdth_set_info() ha %d bus %d\n",hanum,busnum));
@ -232,10 +232,10 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
gdth_evt_str *estr;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
Scsi_Request *scp;
Scsi_Device *sdev;
struct scsi_device *sdev;
#else
Scsi_Cmnd *scp;
Scsi_Device *sdev;
struct scsi_device *sdev;
#endif
char hrec[161];
struct timeval tv;
@ -275,7 +275,7 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
scp->cmd_len = 12;
scp->use_sg = 0;
#else
memset(&sdev,0,sizeof(Scsi_Device));
memset(&sdev,0,sizeof(struct scsi_device));
memset(&scp, 0,sizeof(Scsi_Cmnd));
sdev.host = scp.host = host;
sdev.id = scp.target = sdev.host->this_id;

4
drivers/scsi/gvp11.c
View file

@ -169,7 +169,7 @@ static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
#define CHECK_WD33C93
int __init gvp11_detect(Scsi_Host_Template *tpnt)
int __init gvp11_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
struct Scsi_Host *instance;
@ -361,7 +361,7 @@ static int gvp11_bus_reset(Scsi_Cmnd *cmd)
#include "gvp11.h"
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "GVP11",
.name = "GVP Series II SCSI",
.detect = gvp11_detect,

2
drivers/scsi/gvp11.h
View file

@ -11,7 +11,7 @@
#include <linux/types.h>
int gvp11_detect(Scsi_Host_Template *);
int gvp11_detect(struct scsi_host_template *);
int gvp11_release(struct Scsi_Host *);
const char *wd33c93_info(void);
int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));

8
drivers/scsi/ibmmca.c
View file

@ -492,7 +492,7 @@ static char *ibmrate(unsigned int, int);
static int probe_display(int);
static int probe_bus_mode(int);
static int device_exists(int, int, int *, int *);
static struct Scsi_Host *ibmmca_register(Scsi_Host_Template *, int, int, int, char *);
static struct Scsi_Host *ibmmca_register(struct scsi_host_template *, int, int, int, char *);
static int option_setup(char *);
/* local functions needed for proc_info */
static int ldn_access_load(int, int);
@ -1483,7 +1483,7 @@ static int ibmmca_getinfo(char *buf, int slot, void *dev_id)
return len;
}
int ibmmca_detect(Scsi_Host_Template * scsi_template)
int ibmmca_detect(struct scsi_host_template * scsi_template)
{
struct Scsi_Host *shpnt;
int port, id, i, j, k, list_size, slot;
@ -1736,7 +1736,7 @@ int ibmmca_detect(Scsi_Host_Template * scsi_template)
return found; /* return the number of found SCSI hosts. Should be 1 or 0. */
}
static struct Scsi_Host *ibmmca_register(Scsi_Host_Template * scsi_template, int port, int id, int adaptertype, char *hostname)
static struct Scsi_Host *ibmmca_register(struct scsi_host_template * scsi_template, int port, int id, int adaptertype, char *hostname)
{
struct Scsi_Host *shpnt;
int i, j;
@ -2494,7 +2494,7 @@ static int option_setup(char *str)
__setup("ibmmcascsi=", option_setup);
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "ibmmca",
.proc_info = ibmmca_proc_info,
.name = "IBM SCSI-Subsystem",

2
drivers/scsi/ibmmca.h
View file

@ -11,7 +11,7 @@
/* Common forward declarations for all Linux-versions: */
/* Interfaces to the midlevel Linux SCSI driver */
static int ibmmca_detect (Scsi_Host_Template *);
static int ibmmca_detect (struct scsi_host_template *);
static int ibmmca_release (struct Scsi_Host *);
static int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
static int ibmmca_abort (Scsi_Cmnd *);

2
drivers/scsi/ide-scsi.c
View file

@ -882,7 +882,7 @@ static inline int should_transform(ide_drive_t *drive, struct scsi_cmnd *cmd)
struct gendisk *disk = cmd->request->rq_disk;
if (disk) {
struct Scsi_Device_Template **p = disk->private_data;
struct struct scsi_device_Template **p = disk->private_data;
if (strcmp((*p)->scsi_driverfs_driver.name, "sg") == 0)
return test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
}

4
drivers/scsi/in2000.c
View file

@ -1899,7 +1899,7 @@ static int int_tab[] in2000__INITDATA = {
};
static int __init in2000_detect(Scsi_Host_Template * tpnt)
static int __init in2000_detect(struct scsi_host_template * tpnt)
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
@ -2305,7 +2305,7 @@ static int in2000_proc_info(struct Scsi_Host *instance, char *buf, char **start,
MODULE_LICENSE("GPL");
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "in2000",
.proc_info = in2000_proc_info,
.name = "Always IN2000",

2
drivers/scsi/in2000.h
View file

@ -395,7 +395,7 @@ struct IN2000_hostdata {
# define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \
flags)
static int in2000_detect(Scsi_Host_Template *) in2000__INIT;
static int in2000_detect(struct scsi_host_template *) in2000__INIT;
static int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static int in2000_abort(Scsi_Cmnd *);
static void in2000_setup(char *, int *) in2000__INIT;

908
drivers/scsi/ipr.c
View file

File diff suppressed because it is too large Load diff

243
drivers/scsi/ipr.h
View file

@ -36,23 +36,8 @@
/*
* Literals
*/
#define IPR_DRIVER_VERSION "2.0.14"
#define IPR_DRIVER_DATE "(May 2, 2005)"
/*
* IPR_DBG_TRACE: Setting this to 1 will turn on some general function tracing
* resulting in a bunch of extra debugging printks to the console
*
* IPR_DEBUG: Setting this to 1 will turn on some error path tracing.
* Enables the ipr_trace macro.
*/
#ifdef IPR_DEBUG_ALL
#define IPR_DEBUG 1
#define IPR_DBG_TRACE 1
#else
#define IPR_DEBUG 0
#define IPR_DBG_TRACE 0
#endif
#define IPR_DRIVER_VERSION "2.1.0"
#define IPR_DRIVER_DATE "(October 31, 2005)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@ -76,6 +61,10 @@
#define IPR_SUBS_DEV_ID_571A 0x02C0
#define IPR_SUBS_DEV_ID_571B 0x02BE
#define IPR_SUBS_DEV_ID_571E 0x02BF
#define IPR_SUBS_DEV_ID_571F 0x02D5
#define IPR_SUBS_DEV_ID_572A 0x02C1
#define IPR_SUBS_DEV_ID_572B 0x02C2
#define IPR_SUBS_DEV_ID_575B 0x030D
#define IPR_NAME "ipr"
@ -95,7 +84,10 @@
#define IPR_IOASC_HW_DEV_BUS_STATUS 0x04448500
#define IPR_IOASC_IOASC_MASK 0xFFFFFF00
#define IPR_IOASC_SCSI_STATUS_MASK 0x000000FF
#define IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT 0x05240000
#define IPR_IOASC_IR_RESOURCE_HANDLE 0x05250000
#define IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA 0x05258100
#define IPR_IOASA_IR_DUAL_IOA_DISABLED 0x052C8000
#define IPR_IOASC_BUS_WAS_RESET 0x06290000
#define IPR_IOASC_BUS_WAS_RESET_BY_OTHER 0x06298000
#define IPR_IOASC_ABORTED_CMD_TERM_BY_HOST 0x0B5A0000
@ -107,14 +99,14 @@
#define IPR_NUM_LOG_HCAMS 2
#define IPR_NUM_CFG_CHG_HCAMS 2
#define IPR_NUM_HCAMS (IPR_NUM_LOG_HCAMS + IPR_NUM_CFG_CHG_HCAMS)
#define IPR_MAX_NUM_TARGETS_PER_BUS 0x10
#define IPR_MAX_NUM_TARGETS_PER_BUS 256
#define IPR_MAX_NUM_LUNS_PER_TARGET 256
#define IPR_MAX_NUM_VSET_LUNS_PER_TARGET 8
#define IPR_VSET_BUS 0xff
#define IPR_IOA_BUS 0xff
#define IPR_IOA_TARGET 0xff
#define IPR_IOA_LUN 0xff
#define IPR_MAX_NUM_BUSES 4
#define IPR_MAX_NUM_BUSES 8
#define IPR_MAX_BUS_TO_SCAN IPR_MAX_NUM_BUSES
#define IPR_NUM_RESET_RELOAD_RETRIES 3
@ -205,6 +197,7 @@
#define IPR_SDT_FMT2_EXP_ROM_SEL 0x8
#define IPR_FMT2_SDT_READY_TO_USE 0xC4D4E3F2
#define IPR_DOORBELL 0x82800000
#define IPR_RUNTIME_RESET 0x40000000
#define IPR_PCII_IOA_TRANS_TO_OPER (0x80000000 >> 0)
#define IPR_PCII_IOARCB_XFER_FAILED (0x80000000 >> 3)
@ -261,6 +254,16 @@ struct ipr_std_inq_vpids {
u8 product_id[IPR_PROD_ID_LEN];
}__attribute__((packed));
struct ipr_vpd {
struct ipr_std_inq_vpids vpids;
u8 sn[IPR_SERIAL_NUM_LEN];
}__attribute__((packed));
struct ipr_ext_vpd {
struct ipr_vpd vpd;
__be32 wwid[2];
}__attribute__((packed));
struct ipr_std_inq_data {
u8 peri_qual_dev_type;
#define IPR_STD_INQ_PERI_QUAL(peri) ((peri) >> 5)
@ -304,6 +307,10 @@ struct ipr_config_table_entry {
#define IPR_SUBTYPE_GENERIC_SCSI 1
#define IPR_SUBTYPE_VOLUME_SET 2
#define IPR_QUEUEING_MODEL(res) ((((res)->cfgte.flags) & 0x70) >> 4)
#define IPR_QUEUE_FROZEN_MODEL 0
#define IPR_QUEUE_NACA_MODEL 1
struct ipr_res_addr res_addr;
__be32 res_handle;
__be32 reserved4[2];
@ -410,23 +417,26 @@ struct ipr_ioadl_desc {
struct ipr_ioasa_vset {
__be32 failing_lba_hi;
__be32 failing_lba_lo;
__be32 ioa_data[22];
__be32 reserved;
}__attribute__((packed, aligned (4)));
struct ipr_ioasa_af_dasd {
__be32 failing_lba;
__be32 reserved[2];
}__attribute__((packed, aligned (4)));
struct ipr_ioasa_gpdd {
u8 end_state;
u8 bus_phase;
__be16 reserved;
__be32 ioa_data[23];
__be32 ioa_data[2];
}__attribute__((packed, aligned (4)));
struct ipr_ioasa_raw {
__be32 ioa_data[24];
}__attribute__((packed, aligned (4)));
struct ipr_auto_sense {
__be16 auto_sense_len;
__be16 ioa_data_len;
__be32 data[SCSI_SENSE_BUFFERSIZE/sizeof(__be32)];
};
struct ipr_ioasa {
__be32 ioasc;
@ -453,6 +463,8 @@ struct ipr_ioasa {
__be32 fd_res_handle;
__be32 ioasc_specific; /* status code specific field */
#define IPR_ADDITIONAL_STATUS_FMT 0x80000000
#define IPR_AUTOSENSE_VALID 0x40000000
#define IPR_IOASC_SPECIFIC_MASK 0x00ffffff
#define IPR_FIELD_POINTER_VALID (0x80000000 >> 8)
#define IPR_FIELD_POINTER_MASK 0x0000ffff
@ -461,8 +473,9 @@ struct ipr_ioasa {
struct ipr_ioasa_vset vset;
struct ipr_ioasa_af_dasd dasd;
struct ipr_ioasa_gpdd gpdd;
struct ipr_ioasa_raw raw;
} u;
struct ipr_auto_sense auto_sense;
}__attribute__((packed, aligned (4)));
struct ipr_mode_parm_hdr {
@ -536,28 +549,49 @@ struct ipr_inquiry_page3 {
u8 patch_number[4];
}__attribute__((packed));
#define IPR_INQUIRY_PAGE0_ENTRIES 20
struct ipr_inquiry_page0 {
u8 peri_qual_dev_type;
u8 page_code;
u8 reserved1;
u8 len;
u8 page[IPR_INQUIRY_PAGE0_ENTRIES];
}__attribute__((packed));
struct ipr_hostrcb_device_data_entry {
struct ipr_std_inq_vpids dev_vpids;
u8 dev_sn[IPR_SERIAL_NUM_LEN];
struct ipr_vpd vpd;
struct ipr_res_addr dev_res_addr;
struct ipr_std_inq_vpids new_dev_vpids;
u8 new_dev_sn[IPR_SERIAL_NUM_LEN];
struct ipr_std_inq_vpids ioa_last_with_dev_vpids;
u8 ioa_last_with_dev_sn[IPR_SERIAL_NUM_LEN];
struct ipr_std_inq_vpids cfc_last_with_dev_vpids;
u8 cfc_last_with_dev_sn[IPR_SERIAL_NUM_LEN];
struct ipr_vpd new_vpd;
struct ipr_vpd ioa_last_with_dev_vpd;
struct ipr_vpd cfc_last_with_dev_vpd;
__be32 ioa_data[5];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_device_data_entry_enhanced {
struct ipr_ext_vpd vpd;
u8 ccin[4];
struct ipr_res_addr dev_res_addr;
struct ipr_ext_vpd new_vpd;
u8 new_ccin[4];
struct ipr_ext_vpd ioa_last_with_dev_vpd;
struct ipr_ext_vpd cfc_last_with_dev_vpd;
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_array_data_entry {
struct ipr_std_inq_vpids vpids;
u8 serial_num[IPR_SERIAL_NUM_LEN];
struct ipr_vpd vpd;
struct ipr_res_addr expected_dev_res_addr;
struct ipr_res_addr dev_res_addr;
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_array_data_entry_enhanced {
struct ipr_ext_vpd vpd;
u8 ccin[4];
struct ipr_res_addr expected_dev_res_addr;
struct ipr_res_addr dev_res_addr;
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_ff_error {
__be32 ioa_data[246];
__be32 ioa_data[502];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_01_error {
@ -568,47 +602,75 @@ struct ipr_hostrcb_type_01_error {
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_02_error {
struct ipr_std_inq_vpids ioa_vpids;
u8 ioa_sn[IPR_SERIAL_NUM_LEN];
struct ipr_std_inq_vpids cfc_vpids;
u8 cfc_sn[IPR_SERIAL_NUM_LEN];
struct ipr_std_inq_vpids ioa_last_attached_to_cfc_vpids;
u8 ioa_last_attached_to_cfc_sn[IPR_SERIAL_NUM_LEN];
struct ipr_std_inq_vpids cfc_last_attached_to_ioa_vpids;
u8 cfc_last_attached_to_ioa_sn[IPR_SERIAL_NUM_LEN];
struct ipr_vpd ioa_vpd;
struct ipr_vpd cfc_vpd;
struct ipr_vpd ioa_last_attached_to_cfc_vpd;
struct ipr_vpd cfc_last_attached_to_ioa_vpd;
__be32 ioa_data[3];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_12_error {
struct ipr_ext_vpd ioa_vpd;
struct ipr_ext_vpd cfc_vpd;
struct ipr_ext_vpd ioa_last_attached_to_cfc_vpd;
struct ipr_ext_vpd cfc_last_attached_to_ioa_vpd;
__be32 ioa_data[3];
u8 reserved[844];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_03_error {
struct ipr_std_inq_vpids ioa_vpids;
u8 ioa_sn[IPR_SERIAL_NUM_LEN];
struct ipr_std_inq_vpids cfc_vpids;
u8 cfc_sn[IPR_SERIAL_NUM_LEN];
struct ipr_vpd ioa_vpd;
struct ipr_vpd cfc_vpd;
__be32 errors_detected;
__be32 errors_logged;
u8 ioa_data[12];
struct ipr_hostrcb_device_data_entry dev_entry[3];
u8 reserved[444];
struct ipr_hostrcb_device_data_entry dev[3];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_13_error {
struct ipr_ext_vpd ioa_vpd;
struct ipr_ext_vpd cfc_vpd;
__be32 errors_detected;
__be32 errors_logged;
struct ipr_hostrcb_device_data_entry_enhanced dev[3];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_04_error {
struct ipr_std_inq_vpids ioa_vpids;
u8 ioa_sn[IPR_SERIAL_NUM_LEN];
struct ipr_std_inq_vpids cfc_vpids;
u8 cfc_sn[IPR_SERIAL_NUM_LEN];
struct ipr_vpd ioa_vpd;
struct ipr_vpd cfc_vpd;
u8 ioa_data[12];
struct ipr_hostrcb_array_data_entry array_member[10];
__be32 exposed_mode_adn;
__be32 array_id;
struct ipr_std_inq_vpids incomp_dev_vpids;
u8 incomp_dev_sn[IPR_SERIAL_NUM_LEN];
struct ipr_vpd incomp_dev_vpd;
__be32 ioa_data2;
struct ipr_hostrcb_array_data_entry array_member2[8];
struct ipr_res_addr last_func_vset_res_addr;
u8 vset_serial_num[IPR_SERIAL_NUM_LEN];
u8 protection_level[8];
u8 reserved[124];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_14_error {
struct ipr_ext_vpd ioa_vpd;
struct ipr_ext_vpd cfc_vpd;
__be32 exposed_mode_adn;
__be32 array_id;
struct ipr_res_addr last_func_vset_res_addr;
u8 vset_serial_num[IPR_SERIAL_NUM_LEN];
u8 protection_level[8];
__be32 num_entries;
struct ipr_hostrcb_array_data_entry_enhanced array_member[18];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_07_error {
u8 failure_reason[64];
struct ipr_vpd vpd;
u32 data[222];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_17_error {
u8 failure_reason[64];
struct ipr_ext_vpd vpd;
u32 data[476];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_error {
@ -622,6 +684,11 @@ struct ipr_hostrcb_error {
struct ipr_hostrcb_type_02_error type_02_error;
struct ipr_hostrcb_type_03_error type_03_error;
struct ipr_hostrcb_type_04_error type_04_error;
struct ipr_hostrcb_type_07_error type_07_error;
struct ipr_hostrcb_type_12_error type_12_error;
struct ipr_hostrcb_type_13_error type_13_error;
struct ipr_hostrcb_type_14_error type_14_error;
struct ipr_hostrcb_type_17_error type_17_error;
} u;
}__attribute__((packed, aligned (4)));
@ -655,6 +722,12 @@ struct ipr_hcam {
#define IPR_HOST_RCB_OVERLAY_ID_3 0x03
#define IPR_HOST_RCB_OVERLAY_ID_4 0x04
#define IPR_HOST_RCB_OVERLAY_ID_6 0x06
#define IPR_HOST_RCB_OVERLAY_ID_7 0x07
#define IPR_HOST_RCB_OVERLAY_ID_12 0x12
#define IPR_HOST_RCB_OVERLAY_ID_13 0x13
#define IPR_HOST_RCB_OVERLAY_ID_14 0x14
#define IPR_HOST_RCB_OVERLAY_ID_16 0x16
#define IPR_HOST_RCB_OVERLAY_ID_17 0x17
#define IPR_HOST_RCB_OVERLAY_ID_DEFAULT 0xFF
u8 reserved1[3];
@ -743,6 +816,7 @@ struct ipr_resource_table {
struct ipr_misc_cbs {
struct ipr_ioa_vpd ioa_vpd;
struct ipr_inquiry_page0 page0_data;
struct ipr_inquiry_page3 page3_data;
struct ipr_mode_pages mode_pages;
struct ipr_supported_device supp_dev;
@ -813,6 +887,7 @@ struct ipr_trace_entry {
struct ipr_sglist {
u32 order;
u32 num_sg;
u32 num_dma_sg;
u32 buffer_len;
struct scatterlist scatterlist[1];
};
@ -825,6 +900,13 @@ enum ipr_sdt_state {
DUMP_OBTAINED
};
enum ipr_cache_state {
CACHE_NONE,
CACHE_DISABLED,
CACHE_ENABLED,
CACHE_INVALID
};
/* Per-controller data */
struct ipr_ioa_cfg {
char eye_catcher[8];
@ -841,6 +923,7 @@ struct ipr_ioa_cfg {
u8 allow_cmds:1;
u8 allow_ml_add_del:1;
enum ipr_cache_state cache_state;
u16 type; /* CCIN of the card */
u8 log_level;
@ -911,6 +994,7 @@ struct ipr_ioa_cfg {
u16 reset_retries;
u32 errors_logged;
u32 doorbell;
struct Scsi_Host *host;
struct pci_dev *pdev;
@ -948,6 +1032,7 @@ struct ipr_cmnd {
struct timer_list timer;
void (*done) (struct ipr_cmnd *);
int (*job_step) (struct ipr_cmnd *);
int (*job_step_failed) (struct ipr_cmnd *);
u16 cmd_index;
u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
dma_addr_t sense_buffer_dma;
@ -1083,11 +1168,7 @@ struct ipr_ucode_image_header {
/*
* Macros
*/
#if IPR_DEBUG
#define IPR_DBG_CMD(CMD) do { CMD; } while (0)
#else
#define IPR_DBG_CMD(CMD)
#endif
#define IPR_DBG_CMD(CMD) if (ipr_debug) { CMD; }
#ifdef CONFIG_SCSI_IPR_TRACE
#define ipr_create_trace_file(kobj, attr) sysfs_create_bin_file(kobj, attr)
@ -1135,16 +1216,22 @@ struct ipr_ucode_image_header {
#define ipr_res_dbg(ioa_cfg, res, fmt, ...) \
IPR_DBG_CMD(ipr_res_printk(KERN_INFO, ioa_cfg, res, fmt, ##__VA_ARGS__))
#define ipr_phys_res_err(ioa_cfg, res, fmt, ...) \
{ \
if ((res).bus >= IPR_MAX_NUM_BUSES) { \
ipr_err(fmt": unknown\n", ##__VA_ARGS__); \
} else { \
ipr_err(fmt": %d:%d:%d:%d\n", \
##__VA_ARGS__, (ioa_cfg)->host->host_no, \
(res).bus, (res).target, (res).lun); \
} \
}
#define ipr_trace ipr_dbg("%s: %s: Line: %d\n",\
__FILE__, __FUNCTION__, __LINE__)
#if IPR_DBG_TRACE
#define ENTER printk(KERN_INFO IPR_NAME": Entering %s\n", __FUNCTION__)
#define LEAVE printk(KERN_INFO IPR_NAME": Leaving %s\n", __FUNCTION__)
#else
#define ENTER
#define LEAVE
#endif
#define ENTER IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Entering %s\n", __FUNCTION__))
#define LEAVE IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Leaving %s\n", __FUNCTION__))
#define ipr_err_separator \
ipr_err("----------------------------------------------------------\n")
@ -1216,6 +1303,20 @@ static inline int ipr_is_gscsi(struct ipr_resource_entry *res)
return 0;
}
/**
* ipr_is_naca_model - Determine if a resource is using NACA queueing model
* @res: resource entry struct
*
* Return value:
* 1 if NACA queueing model / 0 if not NACA queueing model
**/
static inline int ipr_is_naca_model(struct ipr_resource_entry *res)
{
if (ipr_is_gscsi(res) && IPR_QUEUEING_MODEL(res) == IPR_QUEUE_NACA_MODEL)
return 1;
return 0;
}
/**
* ipr_is_device - Determine if resource address is that of a device
* @res_addr: resource address struct
@ -1226,7 +1327,7 @@ static inline int ipr_is_gscsi(struct ipr_resource_entry *res)
static inline int ipr_is_device(struct ipr_res_addr *res_addr)
{
if ((res_addr->bus < IPR_MAX_NUM_BUSES) &&
(res_addr->target < IPR_MAX_NUM_TARGETS_PER_BUS))
(res_addr->target < (IPR_MAX_NUM_TARGETS_PER_BUS - 1)))
return 1;
return 0;

150
drivers/scsi/ips.c
View file

@ -139,6 +139,7 @@
/* - Remove 3 unused "inline" functions */
/* 7.12.xx - Use STATIC functions whereever possible */
/* - Clean up deprecated MODULE_PARM calls */
/* 7.12.05 - Remove Version Matching per IBM request */
/*****************************************************************************/
/*
@ -210,7 +211,7 @@ module_param(ips, charp, 0);
* DRIVER_VER
*/
#define IPS_VERSION_HIGH "7.12"
#define IPS_VERSION_LOW ".02 "
#define IPS_VERSION_LOW ".05 "
#if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__)
#warning "This driver has only been tested on the x86/ia64/x86_64 platforms"
@ -247,7 +248,7 @@ module_param(ips, charp, 0);
/*
* Function prototypes
*/
static int ips_detect(Scsi_Host_Template *);
static int ips_detect(struct scsi_host_template *);
static int ips_release(struct Scsi_Host *);
static int ips_eh_abort(Scsi_Cmnd *);
static int ips_eh_reset(Scsi_Cmnd *);
@ -347,8 +348,6 @@ static int ips_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
static int ips_host_info(ips_ha_t *, char *, off_t, int);
static void copy_mem_info(IPS_INFOSTR *, char *, int);
static int copy_info(IPS_INFOSTR *, char *, ...);
static int ips_get_version_info(ips_ha_t * ha, dma_addr_t, int intr);
static void ips_version_check(ips_ha_t * ha, int intr);
static int ips_abort_init(ips_ha_t * ha, int index);
static int ips_init_phase2(int index);
@ -378,7 +377,7 @@ static char *ips_FlashData = NULL; /* CD Boot - Flash Data Buffer */
static dma_addr_t ips_flashbusaddr;
static long ips_FlashDataInUse; /* CD Boot - Flash Data In Use Flag */
static uint32_t MaxLiteCmds = 32; /* Max Active Cmds for a Lite Adapter */
static Scsi_Host_Template ips_driver_template = {
static struct scsi_host_template ips_driver_template = {
.detect = ips_detect,
.release = ips_release,
.info = ips_info,
@ -406,8 +405,6 @@ static Scsi_Host_Template ips_driver_template = {
#endif
};
static IPS_DEFINE_COMPAT_TABLE( Compatable ); /* Version Compatability Table */
/* This table describes all ServeRAID Adapters */
static struct pci_device_id ips_pci_table[] = {
@ -590,7 +587,7 @@ __setup("ips=", ips_setup);
/* */
/****************************************************************************/
static int
ips_detect(Scsi_Host_Template * SHT)
ips_detect(struct scsi_host_template * SHT)
{
int i;
@ -1265,9 +1262,9 @@ ips_proc24_info(char *buffer, char **start, off_t offset, int length,
/* */
/****************************************************************************/
static void
ips_select_queue_depth(struct Scsi_Host *host, Scsi_Device * scsi_devs)
ips_select_queue_depth(struct Scsi_Host *host, struct scsi_device * scsi_devs)
{
Scsi_Device *device;
struct scsi_device *device;
ips_ha_t *ha;
int count = 0;
int min;
@ -1310,7 +1307,7 @@ ips_select_queue_depth(struct Scsi_Host *host, Scsi_Device * scsi_devs)
/* */
/****************************************************************************/
static int
ips_slave_configure(Scsi_Device * SDptr)
ips_slave_configure(struct scsi_device * SDptr)
{
ips_ha_t *ha;
int min;
@ -5930,7 +5927,7 @@ ips_write_driver_status(ips_ha_t * ha, int intr)
strncpy((char *) ha->nvram->bios_high, ha->bios_version, 4);
strncpy((char *) ha->nvram->bios_low, ha->bios_version + 4, 4);
ips_version_check(ha, intr); /* Check BIOS/FW/Driver Versions */
ha->nvram->versioning = 0; /* Indicate the Driver Does Not Support Versioning */
/* now update the page */
if (!ips_readwrite_page5(ha, TRUE, intr)) {
@ -6847,135 +6844,6 @@ ips_verify_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize,
return (0);
}
/*---------------------------------------------------------------------------*/
/* Routine Name: ips_version_check */
/* */
/* Dependencies: */
/* Assumes that ips_read_adapter_status() is called first filling in */
/* the data for SubSystem Parameters. */
/* Called from ips_write_driver_status() so it also assumes NVRAM Page 5 */
/* Data is available. */
/* */
/*---------------------------------------------------------------------------*/
static void
ips_version_check(ips_ha_t * ha, int intr)
{
IPS_VERSION_DATA *VersionInfo;
uint8_t FirmwareVersion[IPS_COMPAT_ID_LENGTH + 1];
uint8_t BiosVersion[IPS_COMPAT_ID_LENGTH + 1];
int MatchError;
int rc;
char BiosString[10];
char FirmwareString[10];
METHOD_TRACE("ips_version_check", 1);
VersionInfo = ( IPS_VERSION_DATA * ) ha->ioctl_data;
memset(FirmwareVersion, 0, IPS_COMPAT_ID_LENGTH + 1);
memset(BiosVersion, 0, IPS_COMPAT_ID_LENGTH + 1);
/* Get the Compatible BIOS Version from NVRAM Page 5 */
memcpy(BiosVersion, ha->nvram->BiosCompatibilityID,
IPS_COMPAT_ID_LENGTH);
rc = IPS_FAILURE;
if (ha->subsys->param[4] & IPS_GET_VERSION_SUPPORT) { /* If Versioning is Supported */
/* Get the Version Info with a Get Version Command */
memset( VersionInfo, 0, sizeof (IPS_VERSION_DATA));
rc = ips_get_version_info(ha, ha->ioctl_busaddr, intr);
if (rc == IPS_SUCCESS)
memcpy(FirmwareVersion, VersionInfo->compatibilityId,
IPS_COMPAT_ID_LENGTH);
}
if (rc != IPS_SUCCESS) { /* If Data Not Obtainable from a GetVersion Command */
/* Get the Firmware Version from Enquiry Data */
memcpy(FirmwareVersion, ha->enq->CodeBlkVersion,
IPS_COMPAT_ID_LENGTH);
}
/* printk(KERN_WARNING "Adapter's BIOS Version = %s\n", BiosVersion); */
/* printk(KERN_WARNING "BIOS Compatible Version = %s\n", IPS_COMPAT_BIOS); */
/* printk(KERN_WARNING "Adapter's Firmware Version = %s\n", FirmwareVersion); */
/* printk(KERN_WARNING "Firmware Compatible Version = %s \n", Compatable[ ha->nvram->adapter_type ]); */
MatchError = 0;
if (strncmp
(FirmwareVersion, Compatable[ha->nvram->adapter_type],
IPS_COMPAT_ID_LENGTH) != 0)
MatchError = 1;
if (strncmp(BiosVersion, IPS_COMPAT_BIOS, IPS_COMPAT_ID_LENGTH) != 0)
MatchError = 1;
ha->nvram->versioning = 1; /* Indicate the Driver Supports Versioning */
if (MatchError) {
ha->nvram->version_mismatch = 1;
if (ips_cd_boot == 0) {
strncpy(&BiosString[0], ha->nvram->bios_high, 4);
strncpy(&BiosString[4], ha->nvram->bios_low, 4);
BiosString[8] = 0;
strncpy(&FirmwareString[0], ha->enq->CodeBlkVersion, 8);
FirmwareString[8] = 0;
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Warning ! ! ! ServeRAID Version Mismatch\n");
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Bios = %s, Firmware = %s, Device Driver = %s%s\n",
BiosString, FirmwareString, IPS_VERSION_HIGH,
IPS_VERSION_LOW);
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"These levels should match to avoid possible compatibility problems.\n");
}
} else {
ha->nvram->version_mismatch = 0;
}
return;
}
/*---------------------------------------------------------------------------*/
/* Routine Name: ips_get_version_info */
/* */
/* Routine Description: */
/* Issue an internal GETVERSION Command */
/* */
/* Return Value: */
/* 0 if Successful, else non-zero */
/*---------------------------------------------------------------------------*/
static int
ips_get_version_info(ips_ha_t * ha, dma_addr_t Buffer, int intr)
{
ips_scb_t *scb;
int rc;
METHOD_TRACE("ips_get_version_info", 1);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_GET_VERSION_INFO;
scb->cmd.version_info.op_code = IPS_CMD_GET_VERSION_INFO;
scb->cmd.version_info.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.version_info.reserved = 0;
scb->cmd.version_info.count = sizeof (IPS_VERSION_DATA);
scb->cmd.version_info.reserved2 = 0;
scb->data_len = sizeof (IPS_VERSION_DATA);
scb->data_busaddr = Buffer;
scb->cmd.version_info.buffer_addr = Buffer;
scb->flags = 0;
/* issue command */
rc = ips_send_wait(ha, scb, ips_cmd_timeout, intr);
return (rc);
}
/****************************************************************************/
/* */
/* Routine Name: ips_abort_init */

4
drivers/scsi/ips.h
View file

@ -450,13 +450,13 @@
*/
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
static int ips_proc24_info(char *, char **, off_t, int, int, int);
static void ips_select_queue_depth(struct Scsi_Host *, Scsi_Device *);
static void ips_select_queue_depth(struct Scsi_Host *, struct scsi_device *);
static int ips_biosparam(Disk *disk, kdev_t dev, int geom[]);
#else
static int ips_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[]);
static int ips_slave_configure(Scsi_Device *SDptr);
static int ips_slave_configure(struct scsi_device *SDptr);
#endif
/*

4
drivers/scsi/jazz_esp.c
View file

@ -52,7 +52,7 @@ static volatile unsigned char cmd_buffer[16];
* via PIO.
*/
int jazz_esp_detect(Scsi_Host_Template *tpnt);
int jazz_esp_detect(struct scsi_host_template *tpnt);
static int jazz_esp_release(struct Scsi_Host *shost)
{
if (shost->irq)
@ -65,7 +65,7 @@ static int jazz_esp_release(struct Scsi_Host *shost)
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "jazz_esp",
.proc_info = &esp_proc_info,
.name = "ESP 100/100a/200",

4
drivers/scsi/mac_esp.c
View file

@ -300,7 +300,7 @@ unsigned long get_base(int chip_num)
* Model dependent ESP setup
*/
int mac_esp_detect(Scsi_Host_Template * tpnt)
int mac_esp_detect(struct scsi_host_template * tpnt)
{
int quick = 0;
int chipnum, chipspresent = 0;
@ -730,7 +730,7 @@ static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int wri
#endif
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "mac_esp",
.name = "Mac 53C9x SCSI",
.detect = mac_esp_detect,

6
drivers/scsi/mac_scsi.c
View file

@ -222,7 +222,7 @@ static struct Scsi_Host *default_instance;
#endif
/*
* Function : int macscsi_detect(Scsi_Host_Template * tpnt)
* Function : int macscsi_detect(struct scsi_host_template * tpnt)
*
* Purpose : initializes mac NCR5380 driver based on the
* command line / compile time port and irq definitions.
@ -233,7 +233,7 @@ static struct Scsi_Host *default_instance;
*
*/
int macscsi_detect(Scsi_Host_Template * tpnt)
int macscsi_detect(struct scsi_host_template * tpnt)
{
static int called = 0;
int flags = 0;
@ -581,7 +581,7 @@ static int macscsi_pwrite (struct Scsi_Host *instance,
#include "NCR5380.c"
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "Mac5380",
.proc_info = macscsi_proc_info,
.name = "Macintosh NCR5380 SCSI",

4
drivers/scsi/mca_53c9x.c
View file

@ -103,7 +103,7 @@ static volatile unsigned char cmd_buffer[16];
static struct ESP_regs eregs;
/***************************************************************** Detection */
static int mca_esp_detect(Scsi_Host_Template *tpnt)
static int mca_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
static int io_port_by_pos[] = MCA_53C9X_IO_PORTS;
@ -444,7 +444,7 @@ static void dma_led_off(struct NCR_ESP *esp)
outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR);
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "mca_53c9x",
.name = "NCR 53c9x SCSI",
.detect = mca_esp_detect,

34
drivers/scsi/megaraid.c
View file

@ -362,6 +362,7 @@ megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
adapter_t *adapter;
scb_t *scb;
int busy=0;
unsigned long flags;
adapter = (adapter_t *)scmd->device->host->hostdata;
@ -377,6 +378,7 @@ megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
* return 0 in that case.
*/
spin_lock_irqsave(&adapter->lock, flags);
scb = mega_build_cmd(adapter, scmd, &busy);
if(scb) {
@ -393,6 +395,7 @@ megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
}
return 0;
}
spin_unlock_irqrestore(&adapter->lock, flags);
return busy;
}
@ -1683,7 +1686,7 @@ mega_rundoneq (adapter_t *adapter)
list_for_each(pos, &adapter->completed_list) {
Scsi_Pointer* spos = (Scsi_Pointer *)pos;
struct scsi_pointer* spos = (struct scsi_pointer *)pos;
cmd = list_entry(spos, Scsi_Cmnd, SCp);
cmd->scsi_done(cmd);
@ -1981,7 +1984,7 @@ megaraid_reset(struct scsi_cmnd *cmd)
mc.cmd = MEGA_CLUSTER_CMD;
mc.opcode = MEGA_RESET_RESERVATIONS;
if( mega_internal_command(adapter, LOCK_INT, &mc, NULL) != 0 ) {
if( mega_internal_command(adapter, &mc, NULL) != 0 ) {
printk(KERN_WARNING
"megaraid: reservation reset failed.\n");
}
@ -3011,7 +3014,7 @@ proc_rdrv(adapter_t *adapter, char *page, int start, int end )
mc.cmd = FC_NEW_CONFIG;
mc.opcode = OP_DCMD_READ_CONFIG;
if( mega_internal_command(adapter, LOCK_INT, &mc, NULL) ) {
if( mega_internal_command(adapter, &mc, NULL) ) {
len = sprintf(page, "40LD read config failed.\n");
@ -3029,11 +3032,11 @@ proc_rdrv(adapter_t *adapter, char *page, int start, int end )
else {
mc.cmd = NEW_READ_CONFIG_8LD;
if( mega_internal_command(adapter, LOCK_INT, &mc, NULL) ) {
if( mega_internal_command(adapter, &mc, NULL) ) {
mc.cmd = READ_CONFIG_8LD;
if( mega_internal_command(adapter, LOCK_INT, &mc,
if( mega_internal_command(adapter, &mc,
NULL) ){
len = sprintf(page,
@ -3632,7 +3635,7 @@ megadev_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
/*
* Issue the command
*/
mega_internal_command(adapter, LOCK_INT, &mc, pthru);
mega_internal_command(adapter, &mc, pthru);
rval = mega_n_to_m((void __user *)arg, &mc);
@ -3715,7 +3718,7 @@ megadev_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
/*
* Issue the command
*/
mega_internal_command(adapter, LOCK_INT, &mc, NULL);
mega_internal_command(adapter, &mc, NULL);
rval = mega_n_to_m((void __user *)arg, &mc);
@ -4234,7 +4237,7 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv)
mc.opcode = OP_DEL_LOGDRV;
mc.subopcode = logdrv;
rval = mega_internal_command(adapter, LOCK_INT, &mc, NULL);
rval = mega_internal_command(adapter, &mc, NULL);
/* log this event */
if(rval) {
@ -4367,7 +4370,7 @@ mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
mc.xferaddr = (u32)dma_handle;
if ( mega_internal_command(adapter, LOCK_INT, &mc, NULL) != 0 ) {
if ( mega_internal_command(adapter, &mc, NULL) != 0 ) {
return -1;
}
@ -4435,7 +4438,7 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
mc.cmd = MEGA_MBOXCMD_PASSTHRU;
mc.xferaddr = (u32)pthru_dma_handle;
rval = mega_internal_command(adapter, LOCK_INT, &mc, pthru);
rval = mega_internal_command(adapter, &mc, pthru);
pci_free_consistent(pdev, sizeof(mega_passthru), pthru,
pthru_dma_handle);
@ -4449,7 +4452,6 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
/**
* mega_internal_command()
* @adapter - pointer to our soft state
* @ls - the scope of the exclusion lock.
* @mc - the mailbox command
* @pthru - Passthru structure for DCDB commands
*
@ -4463,8 +4465,7 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
* Note: parameter 'pthru' is null for non-passthru commands.
*/
static int
mega_internal_command(adapter_t *adapter, lockscope_t ls, megacmd_t *mc,
mega_passthru *pthru )
mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
{
Scsi_Cmnd *scmd;
struct scsi_device *sdev;
@ -4508,15 +4509,8 @@ mega_internal_command(adapter_t *adapter, lockscope_t ls, megacmd_t *mc,
scb->idx = CMDID_INT_CMDS;
/*
* Get the lock only if the caller has not acquired it already
*/
if( ls == LOCK_INT ) spin_lock_irqsave(&adapter->lock, flags);
megaraid_queue(scmd, mega_internal_done);
if( ls == LOCK_INT ) spin_unlock_irqrestore(&adapter->lock, flags);
wait_for_completion(&adapter->int_waitq);
rval = scmd->result;

10
drivers/scsi/megaraid.h
View file

@ -925,13 +925,6 @@ struct mega_hbas {
#define MEGA_BULK_DATA 0x0001
#define MEGA_SGLIST 0x0002
/*
* lockscope definitions, callers can specify the lock scope with this data
* type. LOCK_INT would mean the caller has not acquired the lock before
* making the call and LOCK_EXT would mean otherwise.
*/
typedef enum { LOCK_INT, LOCK_EXT } lockscope_t;
/*
* Parameters for the io-mapped controllers
*/
@ -1062,8 +1055,7 @@ static int mega_support_random_del(adapter_t *);
static int mega_del_logdrv(adapter_t *, int);
static int mega_do_del_logdrv(adapter_t *, int);
static void mega_get_max_sgl(adapter_t *);
static int mega_internal_command(adapter_t *, lockscope_t, megacmd_t *,
mega_passthru *);
static int mega_internal_command(adapter_t *, megacmd_t *, mega_passthru *);
static void mega_internal_done(Scsi_Cmnd *);
static int mega_support_cluster(adapter_t *);
#endif

2
drivers/scsi/megaraid/mega_common.h
View file

@ -96,7 +96,6 @@ typedef struct {
* @param dpc_h : tasklet handle
* @param pdev : pci configuration pointer for kernel
* @param host : pointer to host structure of mid-layer
* @param host_lock : pointer to appropriate lock
* @param lock : synchronization lock for mid-layer and driver
* @param quiescent : driver is quiescent for now.
* @param outstanding_cmds : number of commands pending in the driver
@ -151,7 +150,6 @@ typedef struct {
struct tasklet_struct dpc_h;
struct pci_dev *pdev;
struct Scsi_Host *host;
spinlock_t *host_lock;
spinlock_t lock;
uint8_t quiescent;
int outstanding_cmds;

81
drivers/scsi/megaraid/megaraid_mbox.c
View file

@ -533,8 +533,6 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
// Initialize the synchronization lock for kernel and LLD
spin_lock_init(&adapter->lock);
adapter->host_lock = &adapter->lock;
// Initialize the command queues: the list of free SCBs and the list
// of pending SCBs.
@ -715,9 +713,6 @@ megaraid_io_attach(adapter_t *adapter)
SCSIHOST2ADAP(host) = (caddr_t)adapter;
adapter->host = host;
// export the parameters required by the mid-layer
scsi_assign_lock(host, adapter->host_lock);
host->irq = adapter->irq;
host->unique_id = adapter->unique_id;
host->can_queue = adapter->max_cmds;
@ -1560,10 +1555,6 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *))
scp->scsi_done = done;
scp->result = 0;
assert_spin_locked(adapter->host_lock);
spin_unlock(adapter->host_lock);
/*
* Allocate and build a SCB request
* if_busy flag will be set if megaraid_mbox_build_cmd() command could
@ -1573,23 +1564,16 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *))
* return 0 in that case, and we would do the callback right away.
*/
if_busy = 0;
scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy);
if (scb) {
megaraid_mbox_runpendq(adapter, scb);
}
spin_lock(adapter->host_lock);
scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy);
if (!scb) { // command already completed
done(scp);
return 0;
}
megaraid_mbox_runpendq(adapter, scb);
return if_busy;
}
/**
* megaraid_mbox_build_cmd - transform the mid-layer scsi command to megaraid
* firmware lingua
@ -2546,9 +2530,7 @@ megaraid_mbox_dpc(unsigned long devp)
megaraid_dealloc_scb(adapter, scb);
// send the scsi packet back to kernel
spin_lock(adapter->host_lock);
scp->scsi_done(scp);
spin_unlock(adapter->host_lock);
}
return;
@ -2563,7 +2545,7 @@ megaraid_mbox_dpc(unsigned long devp)
* aborted. All the commands issued to the F/W must complete.
**/
static int
__megaraid_abort_handler(struct scsi_cmnd *scp)
megaraid_abort_handler(struct scsi_cmnd *scp)
{
adapter_t *adapter;
mraid_device_t *raid_dev;
@ -2577,8 +2559,6 @@ __megaraid_abort_handler(struct scsi_cmnd *scp)
adapter = SCP2ADAPTER(scp);
raid_dev = ADAP2RAIDDEV(adapter);
assert_spin_locked(adapter->host_lock);
con_log(CL_ANN, (KERN_WARNING
"megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
scp->serial_number, scp->cmnd[0], SCP2CHANNEL(scp),
@ -2658,6 +2638,7 @@ __megaraid_abort_handler(struct scsi_cmnd *scp)
// traverse through the list of all SCB, since driver does not
// maintain these SCBs on any list
found = 0;
spin_lock_irq(&adapter->lock);
for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
scb = adapter->kscb_list + i;
@ -2680,6 +2661,7 @@ __megaraid_abort_handler(struct scsi_cmnd *scp)
}
}
}
spin_unlock_irq(&adapter->lock);
if (!found) {
con_log(CL_ANN, (KERN_WARNING
@ -2696,22 +2678,6 @@ __megaraid_abort_handler(struct scsi_cmnd *scp)
return FAILED;
}
static int
megaraid_abort_handler(struct scsi_cmnd *scp)
{
adapter_t *adapter;
int rc;
adapter = SCP2ADAPTER(scp);
spin_lock_irq(adapter->host_lock);
rc = __megaraid_abort_handler(scp);
spin_unlock_irq(adapter->host_lock);
return rc;
}
/**
* megaraid_reset_handler - device reset hadler for mailbox based driver
* @scp : reference command
@ -2723,7 +2689,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
* host
**/
static int
__megaraid_reset_handler(struct scsi_cmnd *scp)
megaraid_reset_handler(struct scsi_cmnd *scp)
{
adapter_t *adapter;
scb_t *scb;
@ -2739,10 +2705,6 @@ __megaraid_reset_handler(struct scsi_cmnd *scp)
adapter = SCP2ADAPTER(scp);
raid_dev = ADAP2RAIDDEV(adapter);
assert_spin_locked(adapter->host_lock);
con_log(CL_ANN, (KERN_WARNING "megaraid: reseting the host...\n"));
// return failure if adapter is not responding
if (raid_dev->hw_error) {
con_log(CL_ANN, (KERN_NOTICE
@ -2779,8 +2741,6 @@ __megaraid_reset_handler(struct scsi_cmnd *scp)
adapter->outstanding_cmds, MBOX_RESET_WAIT));
}
spin_unlock(adapter->host_lock);
recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
recovering = adapter->outstanding_cmds;
@ -2806,7 +2766,7 @@ __megaraid_reset_handler(struct scsi_cmnd *scp)
msleep(1000);
}
spin_lock(adapter->host_lock);
spin_lock(&adapter->lock);
// If still outstanding commands, bail out
if (adapter->outstanding_cmds) {
@ -2815,7 +2775,8 @@ __megaraid_reset_handler(struct scsi_cmnd *scp)
raid_dev->hw_error = 1;
return FAILED;
rval = FAILED;
goto out;
}
else {
con_log(CL_ANN, (KERN_NOTICE
@ -2824,7 +2785,10 @@ __megaraid_reset_handler(struct scsi_cmnd *scp)
// If the controller supports clustering, reset reservations
if (!adapter->ha) return SUCCESS;
if (!adapter->ha) {
rval = SUCCESS;
goto out;
}
// clear reservations if any
raw_mbox[0] = CLUSTER_CMD;
@ -2841,22 +2805,11 @@ __megaraid_reset_handler(struct scsi_cmnd *scp)
"megaraid: reservation reset failed\n"));
}
out:
spin_unlock_irq(&adapter->lock);
return rval;
}
static int
megaraid_reset_handler(struct scsi_cmnd *cmd)
{
int rc;
spin_lock_irq(cmd->device->host->host_lock);
rc = __megaraid_reset_handler(cmd);
spin_unlock_irq(cmd->device->host->host_lock);
return rc;
}
/*
* START: internal commands library
*
@ -3776,9 +3729,9 @@ wait_till_fw_empty(adapter_t *adapter)
/*
* Set the quiescent flag to stop issuing cmds to FW.
*/
spin_lock_irqsave(adapter->host_lock, flags);
spin_lock_irqsave(&adapter->lock, flags);
adapter->quiescent++;
spin_unlock_irqrestore(adapter->host_lock, flags);
spin_unlock_irqrestore(&adapter->lock, flags);
/*
* Wait till there are no more cmds outstanding at FW. Try for at most

5
drivers/scsi/megaraid/megaraid_sas.c
View file

@ -766,17 +766,12 @@ static int megasas_generic_reset(struct scsi_cmnd *scmd)
return FAILED;
}
spin_unlock(scmd->device->host->host_lock);
ret_val = megasas_wait_for_outstanding(instance);
if (ret_val == SUCCESS)
printk(KERN_NOTICE "megasas: reset successful \n");
else
printk(KERN_ERR "megasas: failed to do reset\n");
spin_lock(scmd->device->host->host_lock);
return ret_val;
}

4
drivers/scsi/mvme147.c
View file

@ -63,7 +63,7 @@ static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
m147_pcc->dma_cntrl = 0;
}
int mvme147_detect(Scsi_Host_Template *tpnt)
int mvme147_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
wd33c93_regs regs;
@ -130,7 +130,7 @@ static int mvme147_bus_reset(Scsi_Cmnd *cmd)
#include "mvme147.h"
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "MVME147",
.name = "MVME147 built-in SCSI",
.detect = mvme147_detect,

2
drivers/scsi/mvme147.h
View file

@ -10,7 +10,7 @@
#include <linux/types.h>
int mvme147_detect(Scsi_Host_Template *);
int mvme147_detect(struct scsi_host_template *);
int mvme147_release(struct Scsi_Host *);
const char *wd33c93_info(void);
int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));

4
drivers/scsi/mvme16x.c
View file

@ -21,7 +21,7 @@
#include<linux/stat.h>
int mvme16x_scsi_detect(Scsi_Host_Template *tpnt)
int mvme16x_scsi_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
int clock;
@ -61,7 +61,7 @@ static int mvme16x_scsi_release(struct Scsi_Host *shost)
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.name = "MVME16x NCR53c710 SCSI",
.detect = mvme16x_scsi_detect,
.release = mvme16x_scsi_release,

2
drivers/scsi/mvme16x.h
View file

@ -3,7 +3,7 @@
#include <linux/types.h>
int mvme16x_scsi_detect(Scsi_Host_Template *);
int mvme16x_scsi_detect(struct scsi_host_template *);
const char *NCR53c7x0_info(void);
int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int NCR53c7xx_abort(Scsi_Cmnd *);

6
drivers/scsi/nsp32.c
View file

@ -198,7 +198,7 @@ static void __devexit nsp32_remove(struct pci_dev *);
static int __init init_nsp32 (void);
static void __exit exit_nsp32 (void);
/* struct Scsi_Host_Template */
/* struct struct scsi_host_template */
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int);
#else
@ -208,7 +208,7 @@ static int nsp32_proc_info (char *, char **, off_t, int, int, int);
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
static int nsp32_detect (struct pci_dev *pdev);
#else
static int nsp32_detect (Scsi_Host_Template *);
static int nsp32_detect (struct scsi_host_template *);
#endif
static int nsp32_queuecommand(struct scsi_cmnd *,
void (*done)(struct scsi_cmnd *));
@ -2683,7 +2683,7 @@ static int nsp32_detect(struct pci_dev *pdev)
#define DETECT_OK 1
#define DETECT_NG 0
#define PCIDEV (data->Pci)
static int nsp32_detect(Scsi_Host_Template *sht)
static int nsp32_detect(struct scsi_host_template *sht)
#endif
{
struct Scsi_Host *host; /* registered host structure */

4
drivers/scsi/oktagon_esp.c
View file

@ -114,7 +114,7 @@ static volatile unsigned char cmd_buffer[16];
*/
/***************************************************************** Detection */
int oktagon_esp_detect(Scsi_Host_Template *tpnt)
int oktagon_esp_detect(struct scsi_host_template *tpnt)
{
struct NCR_ESP *esp;
struct zorro_dev *z = NULL;
@ -585,7 +585,7 @@ int oktagon_esp_release(struct Scsi_Host *instance)
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.proc_name = "esp-oktagon",
.proc_info = &esp_proc_info,
.name = "BSC Oktagon SCSI",

6
drivers/scsi/pas16.c
View file

@ -369,7 +369,7 @@ void __init pas16_setup(char *str, int *ints)
}
/*
* Function : int pas16_detect(Scsi_Host_Template * tpnt)
* Function : int pas16_detect(struct scsi_host_template * tpnt)
*
* Purpose : detects and initializes PAS16 controllers
* that were autoprobed, overridden on the LILO command line,
@ -381,7 +381,7 @@ void __init pas16_setup(char *str, int *ints)
*
*/
int __init pas16_detect(Scsi_Host_Template * tpnt)
int __init pas16_detect(struct scsi_host_template * tpnt)
{
static int current_override = 0;
static unsigned short current_base = 0;
@ -615,7 +615,7 @@ static int pas16_release(struct Scsi_Host *shost)
return 0;
}
static Scsi_Host_Template driver_template = {
static struct scsi_host_template driver_template = {
.name = "Pro Audio Spectrum-16 SCSI",
.detect = pas16_detect,
.release = pas16_release,

2
drivers/scsi/pas16.h
View file

@ -117,7 +117,7 @@
static int pas16_abort(Scsi_Cmnd *);
static int pas16_biosparam(struct scsi_device *, struct block_device *,
sector_t, int*);
static int pas16_detect(Scsi_Host_Template *);
static int pas16_detect(struct scsi_host_template *);
static int pas16_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static int pas16_bus_reset(Scsi_Cmnd *);

2
drivers/scsi/pci2000.h
View file

@ -184,7 +184,7 @@ typedef struct _INQUIRYDATA
#endif
// function prototypes
int Pci2000_Detect (Scsi_Host_Template *tpnt);
int Pci2000_Detect (struct scsi_host_template *tpnt);
int Pci2000_Command (Scsi_Cmnd *SCpnt);
int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
int Pci2000_Abort (Scsi_Cmnd *SCpnt);

8
drivers/scsi/pcmcia/nsp_cs.c
View file

@ -81,7 +81,7 @@ module_param(free_ports, bool, 0);
MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))");
/* /usr/src/linux/drivers/scsi/hosts.h */
static Scsi_Host_Template nsp_driver_template = {
static struct scsi_host_template nsp_driver_template = {
.proc_name = "nsp_cs",
.proc_info = nsp_proc_info,
.name = "WorkBit NinjaSCSI-3/32Bi(16bit)",
@ -1310,7 +1310,7 @@ static irqreturn_t nspintr(int irq, void *dev_id, struct pt_regs *regs)
/*----------------------------------------------------------------*/
/* look for ninja3 card and init if found */
/*----------------------------------------------------------------*/
static struct Scsi_Host *nsp_detect(Scsi_Host_Template *sht)
static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht)
{
struct Scsi_Host *host; /* registered host structure */
nsp_hw_data *data_b = &nsp_data_base, *data;
@ -1358,7 +1358,7 @@ static struct Scsi_Host *nsp_detect(Scsi_Host_Template *sht)
}
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
static int nsp_detect_old(Scsi_Host_Template *sht)
static int nsp_detect_old(struct scsi_host_template *sht)
{
if (nsp_detect(sht) == NULL) {
return 0;
@ -1717,7 +1717,7 @@ static void nsp_cs_config(dev_link_t *link)
struct Scsi_Host *host;
nsp_hw_data *data = &nsp_data_base;
#if !(LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
Scsi_Device *dev;
struct scsi_device *dev;
dev_node_t **tail, *node;
#endif

6
drivers/scsi/pcmcia/nsp_cs.h
View file

@ -303,9 +303,9 @@ static void nsp_cs_config (dev_link_t *link);
static int nsp_cs_event (event_t event, int priority, event_callback_args_t *args);
/* Linux SCSI subsystem specific functions */
static struct Scsi_Host *nsp_detect (Scsi_Host_Template *sht);
static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht);
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
static int nsp_detect_old (Scsi_Host_Template *sht);
static int nsp_detect_old (struct scsi_host_template *sht);
static int nsp_release_old(struct Scsi_Host *shpnt);
#endif
static const char *nsp_info (struct Scsi_Host *shpnt);
@ -345,7 +345,7 @@ static int nsp_expect_signal (Scsi_Cmnd *SCpnt, unsigned char current_phase,
static int nsp_xfer (Scsi_Cmnd *SCpnt, int phase);
static int nsp_dataphase_bypass (Scsi_Cmnd *SCpnt);
static int nsp_reselected (Scsi_Cmnd *SCpnt);
static struct Scsi_Host *nsp_detect(Scsi_Host_Template *sht);
static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht);
/* Interrupt handler */
//static irqreturn_t nspintr(int irq, void *dev_id, struct pt_regs *regs);

4
drivers/scsi/pcmcia/qlogic_stub.c
View file

@ -72,7 +72,7 @@ static char *version = "qlogic_cs.c 1.79-ac 2002/10/26 (David Hinds)";
#define DEBUG(n, args...)
#endif
static Scsi_Host_Template qlogicfas_driver_template = {
static struct scsi_host_template qlogicfas_driver_template = {
.module = THIS_MODULE,
.name = qlogic_name,
.proc_name = qlogic_name,
@ -108,7 +108,7 @@ static dev_link_t *dev_list = NULL;
static dev_info_t dev_info = "qlogic_cs";
static struct Scsi_Host *qlogic_detect(Scsi_Host_Template *host,
static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
dev_link_t *link, int qbase, int qlirq)
{
int qltyp; /* type of chip */

Some files were not shown because too many files have changed in this diff Show more