mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 00:40:03 +00:00
sata_mv: introduce support for ATAPI devices
Add ATAPI support to sata_mv, using sff DMA for GEN_II chipsets, and plain old PIO for GEN_IIE. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
parent
32cd11a610
commit
da14265e77
1 changed files with 186 additions and 4 deletions
|
@ -31,8 +31,6 @@
|
|||
*
|
||||
* --> Complete a full errata audit for all chipsets to identify others.
|
||||
*
|
||||
* --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
|
||||
*
|
||||
* --> Develop a low-power-consumption strategy, and implement it.
|
||||
*
|
||||
* --> [Experiment, low priority] Investigate interrupt coalescing.
|
||||
|
@ -68,7 +66,7 @@
|
|||
#include <linux/libata.h>
|
||||
|
||||
#define DRV_NAME "sata_mv"
|
||||
#define DRV_VERSION "1.25"
|
||||
#define DRV_VERSION "1.26"
|
||||
|
||||
enum {
|
||||
/* BAR's are enumerated in terms of pci_resource_start() terms */
|
||||
|
@ -126,7 +124,7 @@ enum {
|
|||
|
||||
MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE |
|
||||
ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
|
||||
ATA_FLAG_NCQ | ATA_FLAG_NO_ATAPI,
|
||||
ATA_FLAG_NCQ,
|
||||
|
||||
MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN,
|
||||
|
||||
|
@ -348,6 +346,12 @@ enum {
|
|||
|
||||
EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
|
||||
|
||||
|
||||
BMDMA_CMD_OFS = 0x224, /* bmdma command register */
|
||||
BMDMA_STATUS_OFS = 0x228, /* bmdma status register */
|
||||
BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */
|
||||
BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */
|
||||
|
||||
/* Host private flags (hp_flags) */
|
||||
MV_HP_FLAG_MSI = (1 << 0),
|
||||
MV_HP_ERRATA_50XXB0 = (1 << 1),
|
||||
|
@ -547,6 +551,15 @@ static void mv_pmp_error_handler(struct ata_port *ap);
|
|||
static void mv_process_crpb_entries(struct ata_port *ap,
|
||||
struct mv_port_priv *pp);
|
||||
|
||||
static unsigned long mv_mode_filter(struct ata_device *dev,
|
||||
unsigned long xfer_mask);
|
||||
static void mv_sff_irq_clear(struct ata_port *ap);
|
||||
static int mv_check_atapi_dma(struct ata_queued_cmd *qc);
|
||||
static void mv_bmdma_setup(struct ata_queued_cmd *qc);
|
||||
static void mv_bmdma_start(struct ata_queued_cmd *qc);
|
||||
static void mv_bmdma_stop(struct ata_queued_cmd *qc);
|
||||
static u8 mv_bmdma_status(struct ata_port *ap);
|
||||
|
||||
/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
|
||||
* because we have to allow room for worst case splitting of
|
||||
* PRDs for 64K boundaries in mv_fill_sg().
|
||||
|
@ -594,6 +607,14 @@ static struct ata_port_operations mv6_ops = {
|
|||
.pmp_softreset = mv_softreset,
|
||||
.softreset = mv_softreset,
|
||||
.error_handler = mv_pmp_error_handler,
|
||||
|
||||
.sff_irq_clear = mv_sff_irq_clear,
|
||||
.check_atapi_dma = mv_check_atapi_dma,
|
||||
.bmdma_setup = mv_bmdma_setup,
|
||||
.bmdma_start = mv_bmdma_start,
|
||||
.bmdma_stop = mv_bmdma_stop,
|
||||
.bmdma_status = mv_bmdma_status,
|
||||
.mode_filter = mv_mode_filter,
|
||||
};
|
||||
|
||||
static struct ata_port_operations mv_iie_ops = {
|
||||
|
@ -1392,6 +1413,167 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
|
|||
*cmdw = cpu_to_le16(tmp);
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_mode_filter - Allow ATAPI DMA only on GenII chips.
|
||||
* @dev: device whose xfer modes are being configured.
|
||||
*
|
||||
* Only the GenII hardware can use DMA with ATAPI drives.
|
||||
*/
|
||||
static unsigned long mv_mode_filter(struct ata_device *adev,
|
||||
unsigned long xfer_mask)
|
||||
{
|
||||
if (adev->class == ATA_DEV_ATAPI) {
|
||||
struct mv_host_priv *hpriv = adev->link->ap->host->private_data;
|
||||
if (!IS_GEN_II(hpriv)) {
|
||||
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
|
||||
ata_dev_printk(adev, KERN_INFO,
|
||||
"ATAPI DMA not supported on this chipset\n");
|
||||
}
|
||||
}
|
||||
return xfer_mask;
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_sff_irq_clear - Clear hardware interrupt after DMA.
|
||||
* @ap: Port associated with this ATA transaction.
|
||||
*
|
||||
* We need this only for ATAPI bmdma transactions,
|
||||
* as otherwise we experience spurious interrupts
|
||||
* after libata-sff handles the bmdma interrupts.
|
||||
*/
|
||||
static void mv_sff_irq_clear(struct ata_port *ap)
|
||||
{
|
||||
mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ);
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA.
|
||||
* @qc: queued command to check for chipset/DMA compatibility.
|
||||
*
|
||||
* The bmdma engines cannot handle speculative data sizes
|
||||
* (bytecount under/over flow). So only allow DMA for
|
||||
* data transfer commands with known data sizes.
|
||||
*
|
||||
* LOCKING:
|
||||
* Inherited from caller.
|
||||
*/
|
||||
static int mv_check_atapi_dma(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct scsi_cmnd *scmd = qc->scsicmd;
|
||||
|
||||
if (scmd) {
|
||||
switch (scmd->cmnd[0]) {
|
||||
case READ_6:
|
||||
case READ_10:
|
||||
case READ_12:
|
||||
case WRITE_6:
|
||||
case WRITE_10:
|
||||
case WRITE_12:
|
||||
case GPCMD_READ_CD:
|
||||
case GPCMD_SEND_DVD_STRUCTURE:
|
||||
case GPCMD_SEND_CUE_SHEET:
|
||||
return 0; /* DMA is safe */
|
||||
}
|
||||
}
|
||||
return -EOPNOTSUPP; /* use PIO instead */
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_bmdma_setup - Set up BMDMA transaction
|
||||
* @qc: queued command to prepare DMA for.
|
||||
*
|
||||
* LOCKING:
|
||||
* Inherited from caller.
|
||||
*/
|
||||
static void mv_bmdma_setup(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
void __iomem *port_mmio = mv_ap_base(ap);
|
||||
struct mv_port_priv *pp = ap->private_data;
|
||||
|
||||
mv_fill_sg(qc);
|
||||
|
||||
/* clear all DMA cmd bits */
|
||||
writel(0, port_mmio + BMDMA_CMD_OFS);
|
||||
|
||||
/* load PRD table addr. */
|
||||
writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16,
|
||||
port_mmio + BMDMA_PRD_HIGH_OFS);
|
||||
writelfl(pp->sg_tbl_dma[qc->tag],
|
||||
port_mmio + BMDMA_PRD_LOW_OFS);
|
||||
|
||||
/* issue r/w command */
|
||||
ap->ops->sff_exec_command(ap, &qc->tf);
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_bmdma_start - Start a BMDMA transaction
|
||||
* @qc: queued command to start DMA on.
|
||||
*
|
||||
* LOCKING:
|
||||
* Inherited from caller.
|
||||
*/
|
||||
static void mv_bmdma_start(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
void __iomem *port_mmio = mv_ap_base(ap);
|
||||
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
|
||||
u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START;
|
||||
|
||||
/* start host DMA transaction */
|
||||
writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_bmdma_stop - Stop BMDMA transfer
|
||||
* @qc: queued command to stop DMA on.
|
||||
*
|
||||
* Clears the ATA_DMA_START flag in the bmdma control register
|
||||
*
|
||||
* LOCKING:
|
||||
* Inherited from caller.
|
||||
*/
|
||||
static void mv_bmdma_stop(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
void __iomem *port_mmio = mv_ap_base(ap);
|
||||
u32 cmd;
|
||||
|
||||
/* clear start/stop bit */
|
||||
cmd = readl(port_mmio + BMDMA_CMD_OFS);
|
||||
cmd &= ~ATA_DMA_START;
|
||||
writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
|
||||
|
||||
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
|
||||
ata_sff_dma_pause(ap);
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_bmdma_status - Read BMDMA status
|
||||
* @ap: port for which to retrieve DMA status.
|
||||
*
|
||||
* Read and return equivalent of the sff BMDMA status register.
|
||||
*
|
||||
* LOCKING:
|
||||
* Inherited from caller.
|
||||
*/
|
||||
static u8 mv_bmdma_status(struct ata_port *ap)
|
||||
{
|
||||
void __iomem *port_mmio = mv_ap_base(ap);
|
||||
u32 reg, status;
|
||||
|
||||
/*
|
||||
* Other bits are valid only if ATA_DMA_ACTIVE==0,
|
||||
* and the ATA_DMA_INTR bit doesn't exist.
|
||||
*/
|
||||
reg = readl(port_mmio + BMDMA_STATUS_OFS);
|
||||
if (reg & ATA_DMA_ACTIVE)
|
||||
status = ATA_DMA_ACTIVE;
|
||||
else
|
||||
status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR;
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* mv_qc_prep - Host specific command preparation.
|
||||
* @qc: queued command to prepare
|
||||
|
|
Loading…
Reference in a new issue