x86: Add device tree support

This patch adds minimal support for device tree on x86. The device
tree blob is passed to the kernel via setup_data which requires at
least boot protocol 2.09.

Memory size, restricted memory regions, boot arguments are gathered
the traditional way so things like cmd_line are just here to let the
code compile.

The current plan is use the device tree as an extension and to gather
information which can not be enumerated and would have to be hardcoded
otherwise. This includes things like 
   - which devices are on this I2C/SPI bus?
   - how are the interrupts wired to IO APIC?
   - where could my hpet be?

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit is contained in:
Sebastian Andrzej Siewior 2011-02-22 21:07:37 +01:00 committed by Thomas Gleixner
parent f1c2b35714
commit da6b737b9a
9 changed files with 126 additions and 13 deletions

View File

@ -13,6 +13,7 @@ Table of Contents
I - Introduction
1) Entry point for arch/powerpc
2) Entry point for arch/x86
II - The DT block format
1) Header
@ -225,6 +226,25 @@ it with special cases.
cannot support both configurations with Book E and configurations
with classic Powerpc architectures.
2) Entry point for arch/x86
-------------------------------
There is one single 32bit entry point to the kernel at code32_start,
the decompressor (the real mode entry point goes to the same 32bit
entry point once it switched into protected mode). That entry point
supports one calling convention which is documented in
Documentation/x86/boot.txt
The physical pointer to the device-tree block (defined in chapter II)
is passed via setup_data which requires at least boot protocol 2.09.
The type filed is defined as
#define SETUP_DTB 2
This device-tree is used as an extension to the "boot page". As such it
does not parse / consider data which is already covered by the boot
page. This includes memory size, reserved ranges, command line arguments
or initrd address. It simply holds information which can not be retrieved
otherwise like interrupt routing or a list of devices behind an I2C bus.
II - The DT block format
========================

View File

@ -382,6 +382,8 @@ config X86_INTEL_CE
depends on X86_32
depends on X86_EXTENDED_PLATFORM
select X86_REBOOTFIXUPS
select OF
select OF_EARLY_FLATTREE
---help---
Select for the Intel CE media processor (CE4100) SOC.
This option compiles in support for the CE4100 SOC for settop

View File

@ -12,6 +12,7 @@
/* setup data types */
#define SETUP_NONE 0
#define SETUP_E820_EXT 1
#define SETUP_DTB 2
/* extensible setup data list node */
struct setup_data {

View File

@ -10,9 +10,6 @@
#include <asm/apicdef.h>
#include <asm/irq_vectors.h>
/* Even though we don't support this, supply it to appease OF */
static inline void irq_dispose_mapping(unsigned int virq) { }
static inline int irq_canonicalize(int irq)
{
return ((irq == 2) ? 9 : irq);

View File

@ -1 +1,47 @@
/* dummy prom.h; here to make linux/of.h's #includes happy */
/*
* Definitions for Device tree / OpenFirmware handling on X86
*
* based on arch/powerpc/include/asm/prom.h which is
* Copyright (C) 1996-2005 Paul Mackerras.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_X86_PROM_H
#define _ASM_X86_PROM_H
#ifndef __ASSEMBLY__
#include <linux/of.h>
#include <linux/types.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/setup.h>
#ifdef CONFIG_OF
extern void add_dtb(u64 data);
#else
static inline void add_dtb(u64 data) { }
#endif
extern char cmd_line[COMMAND_LINE_SIZE];
#define pci_address_to_pio pci_address_to_pio
unsigned long pci_address_to_pio(phys_addr_t addr);
/**
* irq_dispose_mapping - Unmap an interrupt
* @virq: linux virq number of the interrupt to unmap
*
* FIXME: We really should implement proper virq handling like power,
* but that's going to be major surgery.
*/
static inline void irq_dispose_mapping(unsigned int virq) { }
#define HAVE_ARCH_DEVTREE_FIXUPS
#endif /* __ASSEMBLY__ */
#endif

View File

@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
obj-$(CONFIG_OF) += devicetree.o
###
# 64 bit specific files

View File

@ -0,0 +1,51 @@
/*
* Architecture specific OF callbacks.
*/
#include <linux/bootmem.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
char __initdata cmd_line[COMMAND_LINE_SIZE];
unsigned int irq_create_of_mapping(struct device_node *controller,
const u32 *intspec, unsigned int intsize)
{
return intspec[0];
}
EXPORT_SYMBOL_GPL(irq_create_of_mapping);
unsigned long pci_address_to_pio(phys_addr_t address)
{
/*
* The ioport address can be directly used by inX / outX
*/
BUG_ON(address >= (1 << 16));
return (unsigned long)address;
}
EXPORT_SYMBOL_GPL(pci_address_to_pio);
void __init early_init_dt_scan_chosen_arch(unsigned long node)
{
BUG();
}
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
BUG();
}
void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
{
return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
}
void __init add_dtb(u64 data)
{
initial_boot_params = phys_to_virt((u64) (u32) data +
offsetof(struct setup_data, data));
}

View File

@ -276,15 +276,6 @@ void smp_x86_platform_ipi(struct pt_regs *regs)
EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
#ifdef CONFIG_OF
unsigned int irq_create_of_mapping(struct device_node *controller,
const u32 *intspec, unsigned int intsize)
{
return intspec[0];
}
EXPORT_SYMBOL_GPL(irq_create_of_mapping);
#endif
#ifdef CONFIG_HOTPLUG_CPU
/* A cpu has been removed from cpu_online_mask. Reset irq affinities. */
void fixup_irqs(void)

View File

@ -113,6 +113,7 @@
#endif
#include <asm/mce.h>
#include <asm/alternative.h>
#include <asm/prom.h>
/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@ -445,6 +446,9 @@ static void __init parse_setup_data(void)
case SETUP_E820_EXT:
parse_e820_ext(data);
break;
case SETUP_DTB:
add_dtb(pa_data);
break;
default:
break;
}