diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 09301b0768d0..db84e2f6b289 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1438,6 +1438,18 @@ enum ieee80211_tdls_actioncode { /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 +/** + * enum - mesh synchronization method identifier + * + * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method + * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method + * that will be specified in a vendor specific information element + */ +enum { + IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, + IEEE80211_SYNC_METHOD_VENDOR = 255, +}; + /** * enum - mesh path selection protocol identifier * diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 96ddb72760b9..8d249d705980 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -225,6 +225,17 @@ config MAC80211_VERBOSE_MHWMP_DEBUG Do not select this option. +config MAC80211_VERBOSE_MESH_SYNC_DEBUG + bool "Verbose mesh mesh synchronization debugging" + depends on MAC80211_DEBUG_MENU + depends on MAC80211_MESH + ---help--- + Selecting this option causes mac80211 to print out very verbose mesh + synchronization debugging messages (when mac80211 is taking part in a + mesh network). + + Do not select this option. + config MAC80211_VERBOSE_TDLS_DEBUG bool "Verbose TDLS debugging" depends on MAC80211_DEBUG_MENU diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile index 1be7a454aa77..3e9d931bba35 100644 --- a/net/mac80211/Makefile +++ b/net/mac80211/Makefile @@ -38,7 +38,8 @@ mac80211-$(CONFIG_MAC80211_MESH) += \ mesh.o \ mesh_pathtbl.o \ mesh_plink.o \ - mesh_hwmp.o + mesh_hwmp.o \ + mesh_sync.o mac80211-$(CONFIG_PM) += pm.o diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 6d45804d09bc..ceeefd424103 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -63,7 +63,7 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : "" int res = scnprintf(buf, sizeof(buf), - "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", + "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", TEST(AUTH), TEST(ASSOC), TEST(PS_STA), TEST(PS_DRIVER), TEST(AUTHORIZED), TEST(SHORT_PREAMBLE), @@ -71,7 +71,8 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL), TEST(UAPSD), TEST(SP), TEST(TDLS_PEER), TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT), - TEST(INSERTED), TEST(RATE_CONTROL)); + TEST(INSERTED), TEST(RATE_CONTROL), + TEST(TOFFSET_KNOWN)); #undef TEST return simple_read_from_buffer(userbuf, count, ppos, buf, res); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8e7af7cee013..ea9623cbd969 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -554,6 +554,24 @@ struct ieee80211_if_ibss { } state; }; +/** + * struct ieee80211_mesh_sync_ops - Extensible synchronization framework interface + * + * these declarations define the interface, which enables + * vendor-specific mesh synchronization + * + */ +struct ieee802_11_elems; +struct ieee80211_mesh_sync_ops { + void (*rx_bcn_presp)(struct ieee80211_sub_if_data *sdata, + u16 stype, + struct ieee80211_mgmt *mgmt, + struct ieee802_11_elems *elems, + struct ieee80211_rx_status *rx_status); + void (*adjust_tbtt)(struct ieee80211_sub_if_data *sdata); + /* add other framework functions here */ +}; + struct ieee80211_if_mesh { struct timer_list housekeeping_timer; struct timer_list mesh_path_timer; @@ -602,6 +620,11 @@ struct ieee80211_if_mesh { IEEE80211_MESH_SEC_AUTHED = 0x1, IEEE80211_MESH_SEC_SECURED = 0x2, } security; + /* Extensible Synchronization Framework */ + struct ieee80211_mesh_sync_ops *sync_ops; + s64 sync_offset_clockdrift_max; + spinlock_t sync_offset_lock; + bool adjusting_tbtt; }; #ifdef CONFIG_MAC80211_MESH diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index b05fa9ef866c..386dbca1eab3 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -13,9 +13,6 @@ #include "ieee80211_i.h" #include "mesh.h" -#define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01 -#define MESHCONF_CAPAB_FORWARDING 0x08 - #define TMR_RUNNING_HK 0 #define TMR_RUNNING_MP 1 #define TMR_RUNNING_MPR 2 @@ -251,8 +248,10 @@ mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) /* Mesh capability */ ifmsh->accepting_plinks = mesh_plink_availables(sdata); *pos = MESHCONF_CAPAB_FORWARDING; - *pos++ |= ifmsh->accepting_plinks ? + *pos |= ifmsh->accepting_plinks ? MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; + *pos++ |= ifmsh->adjusting_tbtt ? + MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00; *pos++ = 0x00; return 0; @@ -573,8 +572,11 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) ieee80211_configure_filter(local); ifmsh->mesh_cc_id = 0; /* Disabled */ - ifmsh->mesh_sp_id = 0; /* Neighbor Offset */ ifmsh->mesh_auth_id = 0; /* Disabled */ + /* register sync ops from extensible synchronization framework */ + ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id); + ifmsh->adjusting_tbtt = false; + ifmsh->sync_offset_clockdrift_max = 0; set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); ieee80211_mesh_root_setup(ifmsh); ieee80211_queue_work(&local->hw, &sdata->work); @@ -616,6 +618,7 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, struct ieee80211_rx_status *rx_status) { struct ieee80211_local *local = sdata->local; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee802_11_elems elems; struct ieee80211_channel *channel; u32 supp_rates = 0; @@ -654,6 +657,10 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, supp_rates = ieee80211_sta_get_rates(local, &elems, band); mesh_neighbour_update(mgmt->sa, supp_rates, sdata, &elems); } + + if (ifmsh->sync_ops) + ifmsh->sync_ops->rx_bcn_presp(sdata, + stype, mgmt, &elems, rx_status); } static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, @@ -721,6 +728,9 @@ void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) ieee80211_mesh_rootpath(sdata); + + if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags)) + mesh_sync_adjust_tbtt(sdata); } void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) @@ -761,4 +771,5 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) (unsigned long) sdata); INIT_LIST_HEAD(&ifmsh->preq_queue.list); spin_lock_init(&ifmsh->mesh_preq_queue_lock); + spin_lock_init(&ifmsh->sync_offset_lock); } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 3e52439ed112..fa7d9704c175 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -18,6 +18,20 @@ /* Data structures */ +/** + * enum mesh_config_capab_flags - mesh config IE capability flags + * + * @MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish + * additional mesh peerings with other mesh STAs + * @MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs + * @MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure is ongoing + */ +enum mesh_config_capab_flags { + MESHCONF_CAPAB_ACCEPT_PLINKS = BIT(0), + MESHCONF_CAPAB_FORWARDING = BIT(3), + MESHCONF_CAPAB_TBTT_ADJUSTING = BIT(5), +}; + /** * enum mesh_path_flags - mac80211 mesh path flags * @@ -56,12 +70,15 @@ enum mesh_path_flags { * @MESH_WORK_GROW_MPP_TABLE: the mesh portals table is full and needs to * grow * @MESH_WORK_ROOT: the mesh root station needs to send a frame + * @MESH_WORK_DRIFT_ADJUST: time to compensate for clock drift relative to other + * mesh nodes */ enum mesh_deferred_task_flags { MESH_WORK_HOUSEKEEPING, MESH_WORK_GROW_MPATH_TABLE, MESH_WORK_GROW_MPP_TABLE, MESH_WORK_ROOT, + MESH_WORK_DRIFT_ADJUST, }; /** @@ -234,6 +251,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata); void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); +struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); /* Mesh paths */ int mesh_nexthop_lookup(struct sk_buff *skb, @@ -327,6 +345,7 @@ void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata); void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata); void mesh_plink_quiesce(struct sta_info *sta); void mesh_plink_restart(struct sta_info *sta); +void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata); #else #define mesh_allocated 0 static inline void diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c new file mode 100644 index 000000000000..f78b0139856f --- /dev/null +++ b/net/mac80211/mesh_sync.c @@ -0,0 +1,296 @@ +/* + * Copyright 2011-2012, Pavel Zubarev + * Copyright 2011-2012, Marco Porsch + * Copyright 2011-2012, cozybit Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "ieee80211_i.h" +#include "mesh.h" +#include "driver-ops.h" + +#ifdef CONFIG_MAC80211_VERBOSE_MESH_SYNC_DEBUG +#define msync_dbg(fmt, args...) \ + printk(KERN_DEBUG "Mesh sync (%s): " fmt "\n", sdata->name, ##args) +#else +#define msync_dbg(fmt, args...) do { (void)(0); } while (0) +#endif + +/* This is not in the standard. It represents a tolerable tbtt drift below + * which we do no TSF adjustment. + */ +#define TBTT_MINIMUM_ADJUSTMENT 10 + +struct sync_method { + u8 method; + struct ieee80211_mesh_sync_ops ops; +}; + +/** + * mesh_peer_tbtt_adjusting - check if an mp is currently adjusting its TBTT + * + * @ie: information elements of a management frame from the mesh peer + */ +static bool mesh_peer_tbtt_adjusting(struct ieee802_11_elems *ie) +{ + return (ie->mesh_config->meshconf_cap & + MESHCONF_CAPAB_TBTT_ADJUSTING) != 0; +} + +void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + /* sdata->vif.bss_conf.beacon_int in 1024us units, 0.04% */ + u64 beacon_int_fraction = sdata->vif.bss_conf.beacon_int * 1024 / 2500; + u64 tsf; + u64 tsfdelta; + + spin_lock_bh(&ifmsh->sync_offset_lock); + + if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) { + msync_dbg("TBTT : max clockdrift=%lld; adjusting", + (long long) ifmsh->sync_offset_clockdrift_max); + tsfdelta = -ifmsh->sync_offset_clockdrift_max; + ifmsh->sync_offset_clockdrift_max = 0; + } else { + msync_dbg("TBTT : max clockdrift=%lld; adjusting by %llu", + (long long) ifmsh->sync_offset_clockdrift_max, + (unsigned long long) beacon_int_fraction); + tsfdelta = -beacon_int_fraction; + ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction; + } + + tsf = drv_get_tsf(local, sdata); + if (tsf != -1ULL) + drv_set_tsf(local, sdata, tsf + tsfdelta); + spin_unlock_bh(&ifmsh->sync_offset_lock); +} + +static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, + u16 stype, + struct ieee80211_mgmt *mgmt, + struct ieee802_11_elems *elems, + struct ieee80211_rx_status *rx_status) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct ieee80211_local *local = sdata->local; + struct sta_info *sta; + u64 t_t, t_r; + + WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET); + + /* standard mentions only beacons */ + if (stype != IEEE80211_STYPE_BEACON) + return; + + /* The current tsf is a first approximation for the timestamp + * for the received beacon. Further down we try to get a + * better value from the rx_status->mactime field if + * available. Also we have to call drv_get_tsf() before + * entering the rcu-read section.*/ + t_r = drv_get_tsf(local, sdata); + + rcu_read_lock(); + sta = sta_info_get(sdata, mgmt->sa); + if (!sta) + goto no_sync; + + /* check offset sync conditions (13.13.2.2.1) + * + * TODO also sync to + * dot11MeshNbrOffsetMaxNeighbor non-peer non-MBSS neighbors + */ + + if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) { + clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN); + msync_dbg("STA %pM : is adjusting TBTT", sta->sta.addr); + goto no_sync; + } + + if (rx_status->flag & RX_FLAG_MACTIME_MPDU && rx_status->mactime) { + /* + * The mactime is defined as the time the first data symbol + * of the frame hits the PHY, and the timestamp of the beacon + * is defined as "the time that the data symbol containing the + * first bit of the timestamp is transmitted to the PHY plus + * the transmitting STA's delays through its local PHY from the + * MAC-PHY interface to its interface with the WM" (802.11 + * 11.1.2) + * + * T_r, in 13.13.2.2.2, is just defined as "the frame reception + * time" but we unless we interpret that time to be the same + * time of the beacon timestamp, the offset calculation will be + * off. Below we adjust t_r to be "the time at which the first + * symbol of the timestamp element in the beacon is received". + * This correction depends on the rate. + * + * Based on similar code in ibss.c + */ + int rate; + + if (rx_status->flag & RX_FLAG_HT) { + /* TODO: + * In principle there could be HT-beacons (Dual Beacon + * HT Operation options), but for now ignore them and + * just use the primary (i.e. non-HT) beacons for + * synchronization. + * */ + goto no_sync; + } else + rate = local->hw.wiphy->bands[rx_status->band]-> + bitrates[rx_status->rate_idx].bitrate; + + /* 24 bytes of header * 8 bits/byte * + * 10*(100 Kbps)/Mbps / rate (100 Kbps)*/ + t_r = rx_status->mactime + (24 * 8 * 10 / rate); + } + + /* Timing offset calculation (see 13.13.2.2.2) */ + t_t = le64_to_cpu(mgmt->u.beacon.timestamp); + sta->t_offset = t_t - t_r; + + if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) { + s64 t_clockdrift = sta->t_offset_setpoint + - sta->t_offset; + + msync_dbg("STA %pM : sta->t_offset=%lld," + " sta->t_offset_setpoint=%lld," + " t_clockdrift=%lld", + sta->sta.addr, + (long long) sta->t_offset, + (long long) + sta->t_offset_setpoint, + (long long) t_clockdrift); + rcu_read_unlock(); + + spin_lock_bh(&ifmsh->sync_offset_lock); + if (t_clockdrift > + ifmsh->sync_offset_clockdrift_max) + ifmsh->sync_offset_clockdrift_max + = t_clockdrift; + spin_unlock_bh(&ifmsh->sync_offset_lock); + + } else { + sta->t_offset_setpoint = sta->t_offset; + set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN); + msync_dbg("STA %pM : offset was invalid, " + " sta->t_offset=%lld", + sta->sta.addr, + (long long) sta->t_offset); + rcu_read_unlock(); + } + return; + +no_sync: + rcu_read_unlock(); +} + +static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + + WARN_ON(ifmsh->mesh_sp_id + != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET); + BUG_ON(!rcu_read_lock_held()); + + spin_lock_bh(&ifmsh->sync_offset_lock); + + if (ifmsh->sync_offset_clockdrift_max > + TBTT_MINIMUM_ADJUSTMENT) { + /* Since ajusting the tsf here would + * require a possibly blocking call + * to the driver tsf setter, we punt + * the tsf adjustment to the mesh tasklet + */ + msync_dbg("TBTT : kicking off TBTT " + "adjustment with " + "clockdrift_max=%lld", + ifmsh->sync_offset_clockdrift_max); + set_bit(MESH_WORK_DRIFT_ADJUST, + &ifmsh->wrkq_flags); + } else { + msync_dbg("TBTT : max clockdrift=%lld; " + "too small to adjust", + (long long) + ifmsh->sync_offset_clockdrift_max); + ifmsh->sync_offset_clockdrift_max = 0; + } + spin_unlock_bh(&ifmsh->sync_offset_lock); +} + +static const u8 *mesh_get_vendor_oui(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + u8 offset; + + if (!ifmsh->ie || !ifmsh->ie_len) + return NULL; + + offset = ieee80211_ie_split_vendor(ifmsh->ie, + ifmsh->ie_len, 0); + + if (!offset) + return NULL; + + return ifmsh->ie + offset + 2; +} + +static void mesh_sync_vendor_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, + u16 stype, + struct ieee80211_mgmt *mgmt, + struct ieee802_11_elems *elems, + struct ieee80211_rx_status *rx_status) +{ + const u8 *oui; + + WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR); + msync_dbg("called mesh_sync_vendor_rx_bcn_presp"); + oui = mesh_get_vendor_oui(sdata); + /* here you would implement the vendor offset tracking for this oui */ +} + +static void mesh_sync_vendor_adjust_tbtt(struct ieee80211_sub_if_data *sdata) +{ + const u8 *oui; + + WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR); + msync_dbg("called mesh_sync_vendor_adjust_tbtt"); + oui = mesh_get_vendor_oui(sdata); + /* here you would implement the vendor tsf adjustment for this oui */ +} + +/* global variable */ +static struct sync_method sync_methods[] = { + { + .method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, + .ops = { + .rx_bcn_presp = &mesh_sync_offset_rx_bcn_presp, + .adjust_tbtt = &mesh_sync_offset_adjust_tbtt, + } + }, + { + .method = IEEE80211_SYNC_METHOD_VENDOR, + .ops = { + .rx_bcn_presp = &mesh_sync_vendor_rx_bcn_presp, + .adjust_tbtt = &mesh_sync_vendor_adjust_tbtt, + } + }, +}; + +struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method) +{ + struct ieee80211_mesh_sync_ops *ops = NULL; + u8 i; + + for (i = 0 ; i < ARRAY_SIZE(sync_methods); ++i) { + if (sync_methods[i].method == method) { + ops = &sync_methods[i].ops; + break; + } + } + return ops; +} diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index b1b4b1413c74..f75f5d9ac06d 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -55,6 +55,7 @@ * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame. * @WLAN_STA_INSERTED: This station is inserted into the hash table. * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station. + * @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid. */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH, @@ -76,6 +77,7 @@ enum ieee80211_sta_info_flags { WLAN_STA_4ADDR_EVENT, WLAN_STA_INSERTED, WLAN_STA_RATE_CONTROL, + WLAN_STA_TOFFSET_KNOWN, }; #define STA_TID_NUM 16 @@ -268,6 +270,7 @@ struct sta_ampdu_mlme { * @plink_timeout: timeout of peer link * @plink_timer: peer link watch timer * @plink_timer_was_running: used by suspend/resume to restore timers + * @t_offset: timing offset relative to this host * @debugfs: debug filesystem info * @dead: set to true when sta is unlinked * @uploaded: set to true when sta is uploaded to the driver @@ -357,6 +360,8 @@ struct sta_info { enum nl80211_plink_state plink_state; u32 plink_timeout; struct timer_list plink_timer; + s64 t_offset; + s64 t_offset_setpoint; #endif #ifdef CONFIG_MAC80211_DEBUGFS diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index e0b89780b472..daab5adeb93c 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2373,6 +2373,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, IEEE80211_STYPE_BEACON); } else if (ieee80211_vif_is_mesh(&sdata->vif)) { struct ieee80211_mgmt *mgmt; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 *pos; int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) + sizeof(mgmt->u.beacon); @@ -2382,6 +2383,10 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, goto out; #endif + if (ifmsh->sync_ops) + ifmsh->sync_ops->adjust_tbtt( + sdata); + skb = dev_alloc_skb(local->tx_headroom + hdr_len + 2 + /* NULL SSID */