arm64: dts: rockchip: add Pine64 Quartz64-B device tree

Add a device tree for the Pine64 Quartz64 Model B single board computer.
This board ouputs debug on uart2 and supports the following components:
Gigabit Ethernet
USB2 x2 (one port otg capable)
USB3
PCIe/SATA M2
HDMI
DSI (RPi compatible pinout)
CSI (RPi compatible pinout)
A/B/G/N WiFi
Bluetooth
SDMMC
eMMC
SPI Flash
PI-40 compatible pin header

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220429115252.2360496-6-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Peter Geis 2022-04-29 07:52:50 -04:00 committed by Heiko Stuebner
parent e52ded5543
commit dcc8c66bef
2 changed files with 616 additions and 0 deletions

View File

@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb

View File

@ -0,0 +1,615 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3566.dtsi"
/ {
model = "Pine64 RK3566 Quartz64-B Board";
compatible = "pine64,quartz64-b", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
mmc2 = &sdmmc1;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
gmac1_clkin: external-gmac1-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac1_clkin";
#clock-cells = <0>;
};
leds {
compatible = "gpio-leds";
led-user {
label = "user-led";
default-state = "on";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&user_led_enable_h>;
retain-state-suspended;
};
};
sdio_pwrseq: sdio-pwrseq {
status = "okay";
compatible = "mmc-pwrseq-simple";
clocks = <&rk809 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <100>;
power-off-delay-us = <5000000>;
};
vcc5v0_in: vcc5v0-in-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_in";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_in>;
};
vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb30_host";
enable-active-high;
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb_otg";
enable-active-high;
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
};
&combphy1 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
clock_in_out = "input";
phy-mode = "rgmii-id";
phy-supply = <&vcc_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
&gmac1m1_tx_bus2
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_clkinout
&gmac1m1_rgmii_bus>;
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x4f>;
rx_delay = <0x24>;
phy-handle = <&rgmii_phy1>;
status = "okay";
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <2300>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
regulators {
vdd_log: DCDC_REG1 {
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-boot-on;
regulator-name = "vcc_3v3";
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
};
};
};
};
/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2m1_xfer>;
status = "okay";
};
/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3m1_xfer>;
status = "okay";
};
/*
* i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
* pin 27 - i2c4_sda_m0
* pin 28 - i2c4_scl_m0
*/
&i2c4 {
status = "okay";
};
/*
* i2c5_m0 is exposed on PI40
* pin 29 - i2c5_scl_m0
* pin 31 - i2c5_sda_m0
*/
&i2c5 {
status = "disabled";
};
&mdio1 {
rgmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
};
};
&pinctrl {
bt {
bt_enable_h: bt-enable-h {
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake_l: bt-host-wake-l {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
};
bt_wake_l: bt-wake-l {
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
user_led_enable_h: user-led-enable-h {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic_int {
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
status = "okay";
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcca1v8_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcca1v8_pmu>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_3v3>;
vccio7-supply = <&vcc_3v3>;
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
vmmc-supply = <&vcc3v3_sys>;
vqmmc-supply = <&vcca1v8_pmu>;
status = "okay";
};
&sfc {
pinctrl-0 = <&fspi_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
};
&tsadc {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
status = "okay";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm4345c5";
clocks = <&rk809 1>;
clock-names = "lpo";
device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
vbat-supply = <&vcc3v3_sys>;
vddio-supply = <&vcca1v8_pmu>;
};
};
/*
* uart2_m0 is exposed on PI40
* pin 8 - uart2_tx_m0
* pin 10 - uart2_rx_m0
*/
&uart2 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_usb30_host>;
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb30_host>;
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb_host0_xhci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};