arm: dts: mt7623: add MT7623N reference board with eMMC
Add MT7623N reference board with eMMC. On the board, there is additional external PHY ICPlus IP1001 transceiver available by port 5 on the MDIO bus connectted with GMAC2. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This commit is contained in:
parent
25fad0ef51
commit
dd0dcf003d
|
@ -1152,6 +1152,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
|
|||
mt6592-evb.dtb \
|
||||
mt7623a-rfb-emmc.dtb \
|
||||
mt7623a-rfb-nand.dtb \
|
||||
mt7623n-rfb-emmc.dtb \
|
||||
mt7623n-rfb-nand.dtb \
|
||||
mt7623n-bananapi-bpi-r2.dtb \
|
||||
mt8127-moose.dtb \
|
||||
|
|
|
@ -968,6 +968,14 @@
|
|||
};
|
||||
};
|
||||
|
||||
i2c2_pins_a: i2c2-default {
|
||||
pin-i2c2 {
|
||||
pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>,
|
||||
<MT7623_PIN_78_SCL2_FUNC_SCL2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins_b: i2c2-alt {
|
||||
pin-i2c2 {
|
||||
pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
|
||||
|
@ -1185,6 +1193,15 @@
|
|||
};
|
||||
};
|
||||
|
||||
spi2_pins_a: spi2-default {
|
||||
pins-spi {
|
||||
pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>,
|
||||
<MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>,
|
||||
<MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>,
|
||||
<MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins_a: uart0-default {
|
||||
pins-dat {
|
||||
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
|
||||
|
|
|
@ -0,0 +1,326 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (c) 2017-2018 MediaTek Inc.
|
||||
* Author: Sean Wang <sean.wang@mediatek.com>
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "mt7623.dtsi"
|
||||
#include "mt6323.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MediaTek MT7623N with eMMC reference board";
|
||||
compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
|
||||
cpu@2 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
|
||||
cpu@3 {
|
||||
proc-supply = <&mt6323_vproc_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&key_pins_a>;
|
||||
|
||||
factory {
|
||||
label = "factory";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x80000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "mediatek,mt2701-wm8960-machine";
|
||||
mediatek,platform = <&afe>;
|
||||
audio-routing =
|
||||
"Headphone", "HP_L",
|
||||
"Headphone", "HP_R",
|
||||
"LINPUT1", "AMIC",
|
||||
"RINPUT1", "AMIC";
|
||||
mediatek,audio-codec = <&wm8960>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_pins_a>;
|
||||
};
|
||||
};
|
||||
|
||||
&btif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cir {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cir_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "trgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-handle = <&phy5>;
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy5: ethernet-phy@5 {
|
||||
reg = <5>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
};
|
||||
|
||||
switch@0 {
|
||||
compatible = "mediatek,mt7530";
|
||||
reg = <0>;
|
||||
reset-gpios = <&pio 33 0>;
|
||||
core-supply = <&mt6323_vpa_reg>;
|
||||
io-supply = <&mt6323_vemc3v3_reg>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan0";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "trgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_b>;
|
||||
status = "okay";
|
||||
|
||||
wm8960: wm8960@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_pins_default>;
|
||||
pinctrl-1 = <&mmc0_pins_uhs>;
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
max-frequency = <50000000>;
|
||||
cap-mmc-highspeed;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc1_pins_default>;
|
||||
pinctrl-1 = <&mmc1_pins_uhs>;
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
max-frequency = <50000000>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_3p3v>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_default>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy1 {
|
||||
status = "okay";
|
||||
};
|
Loading…
Reference in New Issue