mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 02:50:43 +00:00
thermal/drivers/hisi: Remove costly sensor inspection
commit 10d7e9a918
upstream.
The sensor is all setup, bind, resetted, acked, etc... every single second.
That was the way to workaround a problem with the interrupt bouncing again and
again.
With the following changes, we fix all in one:
- Do the setup, one time, at probe time
- Add the IRQF_ONESHOT, ack the interrupt in the threaded handler
- Remove the interrupt handler
- Set the correct value for the LAG register
- Remove all the irq_enabled stuff in the code as the interruption
handling is fixed
- Remove the 3ms delay
- Reorder the initialization routine to be in the right order
It ends up to a nicer code and more efficient, the 3-5ms delay is removed from
the get_temp() path.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
aa6e035f25
commit
dd9989eda8
1 changed files with 94 additions and 111 deletions
|
@ -41,6 +41,7 @@
|
|||
#define HISI_TEMP_BASE (-60000)
|
||||
#define HISI_TEMP_RESET (100000)
|
||||
#define HISI_TEMP_STEP (784)
|
||||
#define HISI_TEMP_LAG (3500)
|
||||
|
||||
#define HISI_MAX_SENSORS 4
|
||||
#define HISI_DEFAULT_SENSOR 2
|
||||
|
@ -60,8 +61,6 @@ struct hisi_thermal_data {
|
|||
struct clk *clk;
|
||||
struct hisi_thermal_sensor sensors;
|
||||
int irq;
|
||||
bool irq_enabled;
|
||||
|
||||
void __iomem *regs;
|
||||
};
|
||||
|
||||
|
@ -99,9 +98,40 @@ static inline long hisi_thermal_round_temp(int temp)
|
|||
hisi_thermal_temp_to_step(temp));
|
||||
}
|
||||
|
||||
/*
|
||||
* The lag register contains 5 bits encoding the temperature in steps.
|
||||
*
|
||||
* Each time the temperature crosses the threshold boundary, an
|
||||
* interrupt is raised. It could be when the temperature is going
|
||||
* above the threshold or below. However, if the temperature is
|
||||
* fluctuating around this value due to the load, we can receive
|
||||
* several interrupts which may not desired.
|
||||
*
|
||||
* We can setup a temperature representing the delta between the
|
||||
* threshold and the current temperature when the temperature is
|
||||
* decreasing.
|
||||
*
|
||||
* For instance: the lag register is 5°C, the threshold is 65°C, when
|
||||
* the temperature reaches 65°C an interrupt is raised and when the
|
||||
* temperature decrease to 65°C - 5°C another interrupt is raised.
|
||||
*
|
||||
* A very short lag can lead to an interrupt storm, a long lag
|
||||
* increase the latency to react to the temperature changes. In our
|
||||
* case, that is not really a problem as we are polling the
|
||||
* temperature.
|
||||
*
|
||||
* [0:4] : lag register
|
||||
*
|
||||
* The temperature is coded in steps, cf. HISI_TEMP_STEP.
|
||||
*
|
||||
* Min : 0x00 : 0.0 °C
|
||||
* Max : 0x1F : 24.3 °C
|
||||
*
|
||||
* The 'value' parameter is in milliCelsius.
|
||||
*/
|
||||
static inline void hisi_thermal_set_lag(void __iomem *addr, int value)
|
||||
{
|
||||
writel(value, addr + TEMP0_LAG);
|
||||
writel((value / HISI_TEMP_STEP) & 0x1F, addr + TEMP0_LAG);
|
||||
}
|
||||
|
||||
static inline void hisi_thermal_alarm_clear(void __iomem *addr, int value)
|
||||
|
@ -171,71 +201,6 @@ static inline void hisi_thermal_hdak_set(void __iomem *addr, int value)
|
|||
(value << 4), addr + TEMP0_CFG);
|
||||
}
|
||||
|
||||
static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data,
|
||||
struct hisi_thermal_sensor *sensor)
|
||||
{
|
||||
long val;
|
||||
|
||||
mutex_lock(&data->thermal_lock);
|
||||
|
||||
/* disable interrupt */
|
||||
hisi_thermal_alarm_enable(data->regs, 0);
|
||||
hisi_thermal_alarm_clear(data->regs, 1);
|
||||
|
||||
/* disable module firstly */
|
||||
hisi_thermal_enable(data->regs, 0);
|
||||
|
||||
/* select sensor id */
|
||||
hisi_thermal_sensor_select(data->regs, sensor->id);
|
||||
|
||||
/* enable module */
|
||||
hisi_thermal_enable(data->regs, 1);
|
||||
|
||||
usleep_range(3000, 5000);
|
||||
|
||||
val = hisi_thermal_get_temperature(data->regs);
|
||||
|
||||
mutex_unlock(&data->thermal_lock);
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static void hisi_thermal_enable_bind_irq_sensor
|
||||
(struct hisi_thermal_data *data)
|
||||
{
|
||||
struct hisi_thermal_sensor *sensor;
|
||||
|
||||
mutex_lock(&data->thermal_lock);
|
||||
|
||||
sensor = &data->sensors;
|
||||
|
||||
/* setting the hdak time */
|
||||
hisi_thermal_hdak_set(data->regs, 0);
|
||||
|
||||
/* disable module firstly */
|
||||
hisi_thermal_reset_enable(data->regs, 0);
|
||||
hisi_thermal_enable(data->regs, 0);
|
||||
|
||||
/* select sensor id */
|
||||
hisi_thermal_sensor_select(data->regs, sensor->id);
|
||||
|
||||
/* enable for interrupt */
|
||||
hisi_thermal_alarm_set(data->regs, sensor->thres_temp);
|
||||
|
||||
hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET);
|
||||
|
||||
/* enable module */
|
||||
hisi_thermal_reset_enable(data->regs, 1);
|
||||
hisi_thermal_enable(data->regs, 1);
|
||||
|
||||
hisi_thermal_alarm_clear(data->regs, 0);
|
||||
hisi_thermal_alarm_enable(data->regs, 1);
|
||||
|
||||
usleep_range(3000, 5000);
|
||||
|
||||
mutex_unlock(&data->thermal_lock);
|
||||
}
|
||||
|
||||
static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data)
|
||||
{
|
||||
mutex_lock(&data->thermal_lock);
|
||||
|
@ -253,25 +218,10 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp)
|
|||
struct hisi_thermal_sensor *sensor = _sensor;
|
||||
struct hisi_thermal_data *data = sensor->thermal;
|
||||
|
||||
*temp = hisi_thermal_get_sensor_temp(data, sensor);
|
||||
*temp = hisi_thermal_get_temperature(data->regs);
|
||||
|
||||
dev_dbg(&data->pdev->dev, "id=%d, irq=%d, temp=%d, thres=%d\n",
|
||||
sensor->id, data->irq_enabled, *temp, sensor->thres_temp);
|
||||
/*
|
||||
* Bind irq to sensor for two cases:
|
||||
* Reenable alarm IRQ if temperature below threshold;
|
||||
* if irq has been enabled, always set it;
|
||||
*/
|
||||
if (data->irq_enabled) {
|
||||
hisi_thermal_enable_bind_irq_sensor(data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (*temp < sensor->thres_temp) {
|
||||
data->irq_enabled = true;
|
||||
hisi_thermal_enable_bind_irq_sensor(data);
|
||||
enable_irq(data->irq);
|
||||
}
|
||||
dev_dbg(&data->pdev->dev, "id=%d, temp=%d, thres=%d\n",
|
||||
sensor->id, *temp, sensor->thres_temp);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -280,26 +230,27 @@ static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = {
|
|||
.get_temp = hisi_thermal_get_temp,
|
||||
};
|
||||
|
||||
static irqreturn_t hisi_thermal_alarm_irq(int irq, void *dev)
|
||||
{
|
||||
struct hisi_thermal_data *data = dev;
|
||||
|
||||
disable_irq_nosync(irq);
|
||||
data->irq_enabled = false;
|
||||
|
||||
return IRQ_WAKE_THREAD;
|
||||
}
|
||||
|
||||
static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
|
||||
{
|
||||
struct hisi_thermal_data *data = dev;
|
||||
struct hisi_thermal_sensor *sensor = &data->sensors;
|
||||
int temp;
|
||||
|
||||
dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n",
|
||||
sensor->thres_temp);
|
||||
hisi_thermal_alarm_clear(data->regs, 1);
|
||||
|
||||
thermal_zone_device_update(data->sensors.tzd,
|
||||
THERMAL_EVENT_UNSPECIFIED);
|
||||
temp = hisi_thermal_get_temperature(data->regs);
|
||||
|
||||
if (temp >= sensor->thres_temp) {
|
||||
dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n",
|
||||
temp, sensor->thres_temp);
|
||||
|
||||
thermal_zone_device_update(data->sensors.tzd,
|
||||
THERMAL_EVENT_UNSPECIFIED);
|
||||
|
||||
} else if (temp < sensor->thres_temp) {
|
||||
dev_crit(&data->pdev->dev, "THERMAL ALARM stopped: %d < %d\n",
|
||||
temp, sensor->thres_temp);
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
@ -352,6 +303,40 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
|
|||
on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
|
||||
}
|
||||
|
||||
static int hisi_thermal_setup(struct hisi_thermal_data *data)
|
||||
{
|
||||
struct hisi_thermal_sensor *sensor;
|
||||
|
||||
sensor = &data->sensors;
|
||||
|
||||
/* disable module firstly */
|
||||
hisi_thermal_reset_enable(data->regs, 0);
|
||||
hisi_thermal_enable(data->regs, 0);
|
||||
|
||||
/* select sensor id */
|
||||
hisi_thermal_sensor_select(data->regs, sensor->id);
|
||||
|
||||
/* setting the hdak time */
|
||||
hisi_thermal_hdak_set(data->regs, 0);
|
||||
|
||||
/* setting lag value between current temp and the threshold */
|
||||
hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG);
|
||||
|
||||
/* enable for interrupt */
|
||||
hisi_thermal_alarm_set(data->regs, sensor->thres_temp);
|
||||
|
||||
hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET);
|
||||
|
||||
/* enable module */
|
||||
hisi_thermal_reset_enable(data->regs, 1);
|
||||
hisi_thermal_enable(data->regs, 1);
|
||||
|
||||
hisi_thermal_alarm_clear(data->regs, 0);
|
||||
hisi_thermal_alarm_enable(data->regs, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int hisi_thermal_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct hisi_thermal_data *data;
|
||||
|
@ -394,9 +379,6 @@ static int hisi_thermal_probe(struct platform_device *pdev)
|
|||
return ret;
|
||||
}
|
||||
|
||||
hisi_thermal_enable_bind_irq_sensor(data);
|
||||
data->irq_enabled = true;
|
||||
|
||||
ret = hisi_thermal_register_sensor(pdev, data,
|
||||
&data->sensors,
|
||||
HISI_DEFAULT_SENSOR);
|
||||
|
@ -406,10 +388,15 @@ static int hisi_thermal_probe(struct platform_device *pdev)
|
|||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(&pdev->dev, data->irq,
|
||||
hisi_thermal_alarm_irq,
|
||||
ret = hisi_thermal_setup(data);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "Failed to setup the sensor: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(&pdev->dev, data->irq, NULL,
|
||||
hisi_thermal_alarm_irq_thread,
|
||||
0, "hisi_thermal", data);
|
||||
IRQF_ONESHOT, "hisi_thermal", data);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
|
||||
return ret;
|
||||
|
@ -417,8 +404,6 @@ static int hisi_thermal_probe(struct platform_device *pdev)
|
|||
|
||||
hisi_thermal_toggle_sensor(&data->sensors, true);
|
||||
|
||||
enable_irq(data->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -440,7 +425,6 @@ static int hisi_thermal_suspend(struct device *dev)
|
|||
struct hisi_thermal_data *data = dev_get_drvdata(dev);
|
||||
|
||||
hisi_thermal_disable_sensor(data);
|
||||
data->irq_enabled = false;
|
||||
|
||||
clk_disable_unprepare(data->clk);
|
||||
|
||||
|
@ -456,8 +440,7 @@ static int hisi_thermal_resume(struct device *dev)
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
data->irq_enabled = true;
|
||||
hisi_thermal_enable_bind_irq_sensor(data);
|
||||
hisi_thermal_setup(data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
Loading…
Reference in a new issue