ipg: remove some internal comments

This removes some now useless comments that were added when the driver was
developed out-of-tree.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Sorbica Shieh <sorbica@icplus.com.tw>
Cc: Jesse Huang <jesse@icplus.com.tw>
This commit is contained in:
Pekka Enberg 2007-11-30 09:54:51 +02:00 committed by David S. Miller
parent 6d3b2cb92b
commit dea4a87cab
2 changed files with 8 additions and 13 deletions

View file

@ -373,7 +373,6 @@ static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val)
}
}
/* Set LED_Mode JES20040127EEPROM */
static void ipg_set_led_mode(struct net_device *dev)
{
struct ipg_nic_private *sp = netdev_priv(dev);
@ -395,7 +394,6 @@ static void ipg_set_led_mode(struct net_device *dev)
ipg_w32(mode, ASIC_CTRL);
}
/* Set PHYSet JES20040127EEPROM */
static void ipg_set_phy_set(struct net_device *dev)
{
struct ipg_nic_private *sp = netdev_priv(dev);
@ -414,7 +412,7 @@ static int ipg_reset(struct net_device *dev, u32 resetflags)
* register as specified by the 'resetflags' input
* parameter.
*/
void __iomem *ioaddr = ipg_ioaddr(dev); //JES20040127EEPROM:
void __iomem *ioaddr = ipg_ioaddr(dev);
unsigned int timeout_count = 0;
IPG_DEBUG_MSG("_reset\n");
@ -429,10 +427,10 @@ static int ipg_reset(struct net_device *dev, u32 resetflags)
if (++timeout_count > IPG_AC_RESET_TIMEOUT)
return -ETIME;
}
/* Set LED Mode in Asic Control JES20040127EEPROM */
/* Set LED Mode in Asic Control */
ipg_set_led_mode(dev);
/* Set PHYSet Register Value JES20040127EEPROM */
/* Set PHYSet Register Value */
ipg_set_phy_set(dev);
return 0;
}
@ -2006,7 +2004,6 @@ static void ipg_set_phy_default_param(unsigned char rev,
}
}
/* JES20040127EEPROM */
static int read_eeprom(struct net_device *dev, int eep_addr)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
@ -2073,7 +2070,7 @@ static int ipg_hw_init(struct net_device *dev)
unsigned int i;
int rc;
/* Read/Write and Reset EEPROM Value Jesse20040128EEPROM_VALUE */
/* Read/Write and Reset EEPROM Value */
/* Read LED Mode Configuration from EEPROM */
sp->LED_Mode = read_eeprom(dev, 6);

View file

@ -79,7 +79,7 @@ enum ipg_regs {
TX_STATUS = 0x60,
MAC_CTRL = 0x6c,
VLAN_TAG = 0x70, // Unused
PHY_SET = 0x75, // JES20040127EEPROM
PHY_SET = 0x75,
PHY_CTRL = 0x76,
STATION_ADDRESS_0 = 0x78,
STATION_ADDRESS_1 = 0x7a,
@ -312,7 +312,7 @@ enum ipg_regs {
#define IPG_RM_RECEIVEMULTICASTHASH 0x10
#define IPG_RM_RECEIVEIPMULTICAST 0x20
/* PhySet JES20040127EEPROM*/
/* PhySet */
#define IPG_PS_MEM_LENB9B 0x01
#define IPG_PS_MEM_LEN9 0x02
#define IPG_PS_NON_COMPDET 0x04
@ -369,8 +369,8 @@ enum ipg_regs {
#define IPG_AC_RST_OUT 0x01000000
#define IPG_AC_INT_REQUEST 0x02000000
#define IPG_AC_RESET_BUSY 0x04000000
#define IPG_AC_LED_SPEED 0x08000000 //JES20040127EEPROM
#define IPG_AC_LED_MODE_BIT_1 0x20000000 //JES20040127EEPROM
#define IPG_AC_LED_SPEED 0x08000000
#define IPG_AC_LED_MODE_BIT_1 0x20000000
/* EepromCtrl */
#define IPG_EC_RSVD_MASK 0x83FF
@ -785,7 +785,6 @@ struct ipg_nic_private {
unsigned int tx_dirty;
unsigned int rx_current;
unsigned int rx_dirty;
// Add by Grace 2005/05/19
#ifdef JUMBO_FRAME
struct SJumbo Jumbo;
#endif
@ -796,7 +795,6 @@ struct ipg_nic_private {
spinlock_t lock;
int tenmbpsmode;
/*Jesse20040128EEPROM_VALUE */
u16 LED_Mode;
u16 station_addr[3]; /* Station Address in EEPROM Reg 0x10..0x12 */