[PATCH] m68knommu: fix timer register access on 523x ColdFire platforms

The 523x timer TRR register is a full 32bits, the older register (on
other ColdFire parts) was only 16 bits.  Use the right type of
__raw_read when accessing it.

Problem found by Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Greg Ungerer 2006-12-06 11:36:59 +10:00 committed by Linus Torvalds
parent dd93e857fc
commit deb77c8501
1 changed files with 12 additions and 4 deletions

View File

@ -3,7 +3,7 @@
/*
* timers.c -- generic ColdFire hardware timer support.
*
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 1999-2006, Greg Ungerer (gerg@snapgear.com)
*/
/***************************************************************************/
@ -44,6 +44,14 @@ unsigned int mcf_timerlevel = 5;
extern void mcf_settimericr(int timer, int level);
extern int mcf_timerirqpending(int timer);
#if defined(CONFIG_M532x)
#define __raw_readtrr __raw_readl
#define __raw_writetrr __raw_writel
#else
#define __raw_readtrr __raw_readw
#define __raw_writetrr __raw_writew
#endif
/***************************************************************************/
void coldfire_tick(void)
@ -57,7 +65,7 @@ void coldfire_tick(void)
void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *))
{
__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
__raw_writew(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR));
__raw_writetrr(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR));
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
@ -76,7 +84,7 @@ unsigned long coldfire_timer_offset(void)
unsigned long trr, tcn, offset;
tcn = __raw_readw(TA(MCFTIMER_TCN));
trr = __raw_readw(TA(MCFTIMER_TRR));
trr = __raw_readtrr(TA(MCFTIMER_TRR));
offset = (tcn * (1000000 / HZ)) / trr;
/* Check if we just wrapped the counters and maybe missed a tick */
@ -120,7 +128,7 @@ void coldfire_profile_init(void)
/* Set up TIMER 2 as high speed profile clock */
__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
__raw_writew(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
__raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));