From e1849b8fcdfaa71f2e8f9376c9568877ff2bf52b Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Thu, 22 Jun 2023 10:57:55 -0400 Subject: [PATCH] rtc: pcf2127: add support for PCF2131 interrupts on output INT_A The PCF2127 and PCF2129 have one output interrupt pin. The PCF2131 has two, named INT_A and INT_B. The hardware support that any interrupt source can be routed to either one or both of them. Force all interrupt sources to go to the INT A pin. Support to route any interrupt source to INT A/B pins is not supported by this driver at the moment. Signed-off-by: Hugo Villeneuve Reviewed-by: Bruno Thomsen Link: https://lore.kernel.org/r/20230622145800.2442116-13-hugo@hugovil.com Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pcf2127.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 8c2ad9eac861..83dcb1e43abb 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -179,6 +179,7 @@ struct pcf21xx_config { int max_register; unsigned int has_nvmem:1; unsigned int has_bit_wd_ctl_cd0:1; + unsigned int has_int_a_b:1; /* PCF2131 supports two interrupt outputs. */ u8 reg_time_base; /* Time/date base register. */ u8 regs_alarm_base; /* Alarm function base registers. */ u8 reg_wd_ctl; /* Watchdog control register. */ @@ -845,6 +846,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = { .max_register = 0x1d, .has_nvmem = 1, .has_bit_wd_ctl_cd0 = 1, + .has_int_a_b = 0, .reg_time_base = PCF2127_REG_TIME_BASE, .regs_alarm_base = PCF2127_REG_ALARM_BASE, .reg_wd_ctl = PCF2127_REG_WD_CTL, @@ -869,6 +871,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = { .max_register = 0x19, .has_nvmem = 0, .has_bit_wd_ctl_cd0 = 0, + .has_int_a_b = 0, .reg_time_base = PCF2127_REG_TIME_BASE, .regs_alarm_base = PCF2127_REG_ALARM_BASE, .reg_wd_ctl = PCF2127_REG_WD_CTL, @@ -893,6 +896,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = { .max_register = 0x36, .has_nvmem = 0, .has_bit_wd_ctl_cd0 = 0, + .has_int_a_b = 1, .reg_time_base = PCF2131_REG_TIME_BASE, .regs_alarm_base = PCF2131_REG_ALARM_BASE, .reg_wd_ctl = PCF2131_REG_WD_CTL, @@ -989,6 +993,28 @@ static int pcf2127_enable_ts(struct device *dev, int ts_id) return ret; } +/* Route all interrupt sources to INT A pin. */ +static int pcf2127_configure_interrupt_pins(struct device *dev) +{ + struct pcf2127 *pcf2127 = dev_get_drvdata(dev); + int ret; + + /* Mask bits need to be cleared to enable corresponding + * interrupt source. + */ + ret = regmap_write(pcf2127->regmap, + PCF2131_REG_INT_A_MASK1, 0); + if (ret) + return ret; + + ret = regmap_write(pcf2127->regmap, + PCF2131_REG_INT_A_MASK2, 0); + if (ret) + return ret; + + return ret; +} + static int pcf2127_probe(struct device *dev, struct regmap *regmap, int alarm_irq, const char *name, const struct pcf21xx_config *config) { @@ -1047,6 +1073,15 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features); } + if (pcf2127->cfg->has_int_a_b) { + /* Configure int A/B pins, independently of alarm_irq. */ + ret = pcf2127_configure_interrupt_pins(dev); + if (ret) { + dev_err(dev, "failed to configure interrupt pins\n"); + return ret; + } + } + if (pcf2127->cfg->has_nvmem) { struct nvmem_config nvmem_cfg = { .priv = pcf2127,