docs-rst: fix usb cross-references

As some USB documentation files got moved, adjust their
cross-references to their new place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Mauro Carvalho Chehab 2017-04-05 10:23:15 -03:00 committed by Jonathan Corbet
parent 0cb300623e
commit e1c3e6e1ca
10 changed files with 15 additions and 9 deletions

View File

@ -9,7 +9,7 @@ Description:
hubs this facility is always enabled and their device
directories will not contain this file.
For more information, see Documentation/usb/persist.txt.
For more information, see Documentation/driver-api/usb/persist.rst.
What: /sys/bus/usb/devices/.../power/autosuspend
Date: March 2007

View File

@ -1,3 +1,5 @@
.. _usb-urb:
USB Request Block (URB)
~~~~~~~~~~~~~~~~~~~~~~~

View File

@ -8,7 +8,7 @@ Usbcore will call into a driver through callbacks defined in the driver
structure and through the completion handler of URBs a driver submits.
Only the former are in the scope of this document. These two kinds of
callbacks are completely independent of each other. Information on the
completion callback can be found in Documentation/usb/URB.txt.
completion callback can be found in :ref:`usb-urb`.
The callbacks defined in the driver structure are:
@ -53,7 +53,7 @@ The callbacks defined in the driver structure are:
The ioctl interface (2) should be used only if you have a very good
reason. Sysfs is preferred these days. The PM callbacks are covered
separately in Documentation/usb/power-management.txt.
separately in :ref:`usb-power-management`.
Calling conventions
===================

View File

@ -1,3 +1,5 @@
.. _usb-error-codes:
USB Error codes
~~~~~~~~~~~~~~~

View File

@ -1,3 +1,5 @@
.. _usb-persist:
USB device persistence during system suspend
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

View File

@ -328,7 +328,7 @@ possible to work around the hibernation-forces-disconnect problem by
using the USB Persist facility.)
The ``reset_resume`` method is used by the USB Persist facility (see
``Documentation/usb/persist.txt``) and it can also be used under certain
:ref:`usb-persist`) and it can also be used under certain
circumstances when ``CONFIG_USB_PERSIST`` is not enabled. Currently, if a
device is reset during a resume and the driver does not have a
``reset_resume`` method, the driver won't receive any notification about

View File

@ -424,8 +424,8 @@ header.
Unless noted otherwise, the ioctl requests described here will update
the modification time on the usbfs file to which they are applied
(unless they fail). A return of zero indicates success; otherwise, a
standard USB error code is returned. (These are documented in
``Documentation/usb/error-codes.txt`` in your kernel sources.)
standard USB error code is returned (These are documented in
:ref:`usb-error-codes`).
Each of these files multiplexes access to several I/O streams, one per
endpoint. Each device has one control endpoint (endpoint zero) which

View File

@ -406,7 +406,7 @@ Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
before suspending; then remount them after resuming.
There is a work-around for this problem. For more information, see
Documentation/usb/persist.txt.
Documentation/driver-api/usb/persist.rst.
Q: Can I suspend-to-disk using a swap partition under LVM?

View File

@ -490,7 +490,7 @@ static void hdm_write_completion(struct urb *urb)
* disconnect. In the interval before the hub driver starts disconnect
* processing, devices may receive such fault reports for every request.
*
* See <https://www.kernel.org/doc/Documentation/usb/error-codes.txt>
* See <https://www.kernel.org/doc/Documentation/driver-api/usb/error-codes.rst>
*/
static void hdm_read_completion(struct urb *urb)
{

View File

@ -26,7 +26,7 @@ config USB_DEFAULT_PERSIST
unplugged, causing any mounted filesystems to be lost. The
persist feature can still be enabled for individual devices
through the power/persist sysfs node. See
Documentation/usb/persist.txt for more info.
Documentation/driver-api/usb/persist.rst for more info.
If you have any questions about this, say Y here, only say N
if you know exactly what you are doing.