apple: macmace: use eth_hw_addr_set()

Byte by byte assignments.

Fixes build on m68k.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jakub Kicinski 2021-11-18 23:10:31 -08:00 committed by David S. Miller
parent 5b6d5affd2
commit e217fc4aff

View file

@ -92,7 +92,7 @@ static void mace_reset(struct net_device *dev);
static irqreturn_t mace_interrupt(int irq, void *dev_id);
static irqreturn_t mace_dma_intr(int irq, void *dev_id);
static void mace_tx_timeout(struct net_device *dev, unsigned int txqueue);
static void __mace_set_address(struct net_device *dev, void *addr);
static void __mace_set_address(struct net_device *dev, const void *addr);
/*
* Load a receive DMA channel with a base address and ring length
@ -197,6 +197,7 @@ static int mace_probe(struct platform_device *pdev)
unsigned char *addr;
struct net_device *dev;
unsigned char checksum = 0;
u8 macaddr[ETH_ALEN];
int err;
dev = alloc_etherdev(PRIV_BYTES);
@ -229,8 +230,9 @@ static int mace_probe(struct platform_device *pdev)
for (j = 0; j < 6; ++j) {
u8 v = bitrev8(addr[j<<4]);
checksum ^= v;
dev->dev_addr[j] = v;
macaddr[j] = v;
}
eth_hw_addr_set(dev, macaddr);
for (; j < 8; ++j) {
checksum ^= bitrev8(addr[j<<4]);
}
@ -315,11 +317,12 @@ static void mace_reset(struct net_device *dev)
* Load the address on a mace controller.
*/
static void __mace_set_address(struct net_device *dev, void *addr)
static void __mace_set_address(struct net_device *dev, const void *addr)
{
struct mace_data *mp = netdev_priv(dev);
volatile struct mace *mb = mp->mace;
unsigned char *p = addr;
const unsigned char *p = addr;
u8 macaddr[ETH_ALEN];
int i;
/* load up the hardware address */
@ -331,7 +334,8 @@ static void __mace_set_address(struct net_device *dev, void *addr)
;
}
for (i = 0; i < 6; ++i)
mb->padr = dev->dev_addr[i] = p[i];
mb->padr = macaddr[i] = p[i];
eth_hw_addr_set(dev, macaddr);
if (mp->chipid != BROKEN_ADDRCHG_REV)
mb->iac = 0;
}